|  | /* | 
|  | * Detection routine for the NCR53c710 based Amiga SCSI Controllers for Linux. | 
|  | *		Amiga MacroSystemUS WarpEngine SCSI controller. | 
|  | *		Amiga Technologies A4000T SCSI controller. | 
|  | *		Amiga Technologies/DKB A4091 SCSI controller. | 
|  | * | 
|  | * Written 1997 by Alan Hourihane <alanh@fairlite.demon.co.uk> | 
|  | * plus modifications of the 53c7xx.c driver to support the Amiga. | 
|  | */ | 
|  | #include <linux/types.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/blkdev.h> | 
|  | #include <linux/zorro.h> | 
|  | #include <linux/stat.h> | 
|  |  | 
|  | #include <asm/setup.h> | 
|  | #include <asm/page.h> | 
|  | #include <asm/pgtable.h> | 
|  | #include <asm/amigaints.h> | 
|  | #include <asm/amigahw.h> | 
|  | #include <asm/dma.h> | 
|  | #include <asm/irq.h> | 
|  |  | 
|  | #include "scsi.h" | 
|  | #include <scsi/scsi_host.h> | 
|  | #include "53c7xx.h" | 
|  | #include "amiga7xx.h" | 
|  |  | 
|  |  | 
|  | static int amiga7xx_register_one(struct scsi_host_template *tpnt, | 
|  | unsigned long address) | 
|  | { | 
|  | long long options; | 
|  | int clock; | 
|  |  | 
|  | if (!request_mem_region(address, 0x1000, "ncr53c710")) | 
|  | return 0; | 
|  |  | 
|  | address = (unsigned long)z_ioremap(address, 0x1000); | 
|  | options = OPTION_MEMORY_MAPPED | OPTION_DEBUG_TEST1 | OPTION_INTFLY | | 
|  | OPTION_SYNCHRONOUS | OPTION_ALWAYS_SYNCHRONOUS | | 
|  | OPTION_DISCONNECT; | 
|  | clock = 50000000;	/* 50 MHz SCSI Clock */ | 
|  | ncr53c7xx_init(tpnt, 0, 710, address, 0, IRQ_AMIGA_PORTS, DMA_NONE, | 
|  | options, clock); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  |  | 
|  | #ifdef CONFIG_ZORRO | 
|  |  | 
|  | static struct { | 
|  | zorro_id id; | 
|  | unsigned long offset; | 
|  | int absolute;	/* offset is absolute address */ | 
|  | } amiga7xx_table[] = { | 
|  | { .id = ZORRO_PROD_PHASE5_BLIZZARD_603E_PLUS, .offset = 0xf40000, | 
|  | .absolute = 1 }, | 
|  | { .id = ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE_40xx, .offset = 0x40000 }, | 
|  | { .id = ZORRO_PROD_CBM_A4091_1, .offset = 0x800000 }, | 
|  | { .id = ZORRO_PROD_CBM_A4091_2, .offset = 0x800000 }, | 
|  | { .id = ZORRO_PROD_GVP_GFORCE_040_060, .offset = 0x40000 }, | 
|  | { 0 } | 
|  | }; | 
|  |  | 
|  | static int __init amiga7xx_zorro_detect(struct scsi_host_template *tpnt) | 
|  | { | 
|  | int num = 0, i; | 
|  | struct zorro_dev *z = NULL; | 
|  | unsigned long address; | 
|  |  | 
|  | while ((z = zorro_find_device(ZORRO_WILDCARD, z))) { | 
|  | for (i = 0; amiga7xx_table[i].id; i++) | 
|  | if (z->id == amiga7xx_table[i].id) | 
|  | break; | 
|  | if (!amiga7xx_table[i].id) | 
|  | continue; | 
|  | if (amiga7xx_table[i].absolute) | 
|  | address = amiga7xx_table[i].offset; | 
|  | else | 
|  | address = z->resource.start + amiga7xx_table[i].offset; | 
|  | num += amiga7xx_register_one(tpnt, address); | 
|  | } | 
|  | return num; | 
|  | } | 
|  |  | 
|  | #endif /* CONFIG_ZORRO */ | 
|  |  | 
|  |  | 
|  | int __init amiga7xx_detect(struct scsi_host_template *tpnt) | 
|  | { | 
|  | static unsigned char called = 0; | 
|  | int num = 0; | 
|  |  | 
|  | if (called || !MACH_IS_AMIGA) | 
|  | return 0; | 
|  |  | 
|  | tpnt->proc_name = "Amiga7xx"; | 
|  |  | 
|  | if (AMIGAHW_PRESENT(A4000_SCSI)) | 
|  | num += amiga7xx_register_one(tpnt, 0xdd0040); | 
|  |  | 
|  | #ifdef CONFIG_ZORRO | 
|  | num += amiga7xx_zorro_detect(tpnt); | 
|  | #endif | 
|  |  | 
|  | called = 1; | 
|  | return num; | 
|  | } | 
|  |  | 
|  | static int amiga7xx_release(struct Scsi_Host *shost) | 
|  | { | 
|  | if (shost->irq) | 
|  | free_irq(shost->irq, NULL); | 
|  | if (shost->dma_channel != 0xff) | 
|  | free_dma(shost->dma_channel); | 
|  | if (shost->io_port && shost->n_io_port) | 
|  | release_region(shost->io_port, shost->n_io_port); | 
|  | scsi_unregister(shost); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct scsi_host_template driver_template = { | 
|  | .name			= "Amiga NCR53c710 SCSI", | 
|  | .detect			= amiga7xx_detect, | 
|  | .release		= amiga7xx_release, | 
|  | .queuecommand		= NCR53c7xx_queue_command, | 
|  | .abort			= NCR53c7xx_abort, | 
|  | .reset			= NCR53c7xx_reset, | 
|  | .can_queue		= 24, | 
|  | .this_id		= 7, | 
|  | .sg_tablesize		= 63, | 
|  | .cmd_per_lun		= 3, | 
|  | .use_clustering		= DISABLE_CLUSTERING | 
|  | }; | 
|  |  | 
|  |  | 
|  | #include "scsi_module.c" |