pxafb: preliminary smart panel interface support
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/include/asm-arm/arch-pxa/regs-lcd.h b/include/asm-arm/arch-pxa/regs-lcd.h
index f84dd47..f762493 100644
--- a/include/asm-arm/arch-pxa/regs-lcd.h
+++ b/include/asm-arm/arch-pxa/regs-lcd.h
@@ -7,7 +7,8 @@
#define LCCR1 (0x004) /* LCD Controller Control Register 1 */
#define LCCR2 (0x008) /* LCD Controller Control Register 2 */
#define LCCR3 (0x00C) /* LCD Controller Control Register 3 */
-#define LCCR4 (0x010) /* LCD Controller Control Register 3 */
+#define LCCR4 (0x010) /* LCD Controller Control Register 4 */
+#define LCCR5 (0x014) /* LCD Controller Control Register 5 */
#define DFBR0 (0x020) /* DMA Channel 0 Frame Branch Register */
#define DFBR1 (0x024) /* DMA Channel 1 Frame Branch Register */
#define LCSR (0x038) /* LCD Controller Status Register */
@@ -15,6 +16,9 @@
#define TMEDRGBR (0x040) /* TMED RGB Seed Register */
#define TMEDCR (0x044) /* TMED Control Register */
+#define CMDCR (0x100) /* Command Control Register */
+#define PRSR (0x104) /* Panel Read Status Register */
+
#define LCCR3_1BPP (0 << 24)
#define LCCR3_2BPP (1 << 24)
#define LCCR3_4BPP (2 << 24)
@@ -39,6 +43,9 @@
#define FSADR1 (0x214) /* DMA Channel 1 Frame Source Address Register */
#define FIDR1 (0x218) /* DMA Channel 1 Frame ID Register */
#define LDCMD1 (0x21C) /* DMA Channel 1 Command Register */
+#define FDADR6 (0x260) /* DMA Channel 6 Frame Descriptor Address Register */
+#define FSADR6 (0x264) /* DMA Channel 6 Frame Source Address Register */
+#define FIDR6 (0x268) /* DMA Channel 6 Frame ID Register */
#define LCCR0_ENB (1 << 0) /* LCD Controller enable */
#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */
@@ -122,6 +129,11 @@
#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* VSP Active High */
#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* VSP Active Low */
+#define LCCR5_IUM(x) (1 << ((x) + 23)) /* input underrun mask */
+#define LCCR5_BSM(x) (1 << ((x) + 15)) /* branch mask */
+#define LCCR5_EOFM(x) (1 << ((x) + 7)) /* end of frame mask */
+#define LCCR5_SOFM(x) (1 << ((x) + 0)) /* start of frame mask */
+
#define LCSR_LDD (1 << 0) /* LCD Disable Done */
#define LCSR_SOF (1 << 1) /* Start of frame */
#define LCSR_BER (1 << 2) /* Bus error */
@@ -133,7 +145,27 @@
#define LCSR_EOF (1 << 8) /* end of frame */
#define LCSR_BS (1 << 9) /* branch status */
#define LCSR_SINT (1 << 10) /* subsequent interrupt */
+#define LCSR_RD_ST (1 << 11) /* read status */
+#define LCSR_CMD_INT (1 << 12) /* command interrupt */
#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */
+/* smartpanel related */
+#define PRSR_DATA(x) ((x) & 0xff) /* Panel Data */
+#define PRSR_A0 (1 << 8) /* Read Data Source */
+#define PRSR_ST_OK (1 << 9) /* Status OK */
+#define PRSR_CON_NT (1 << 10) /* Continue to Next Command */
+
+#define SMART_CMD_A0 (0x1 << 8)
+#define SMART_CMD_READ_STATUS_REG (0x0 << 9)
+#define SMART_CMD_READ_FRAME_BUFFER ((0x0 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_COMMAND (0x1 << 9)
+#define SMART_CMD_WRITE_DATA ((0x1 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_FRAME ((0x2 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WAIT_FOR_VSYNC (0x3 << 9)
+#define SMART_CMD_NOOP (0x4 << 9)
+#define SMART_CMD_INTERRUPT (0x5 << 9)
+
+#define SMART_CMD(x) (SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
+#define SMART_DAT(x) (SMART_CMD_WRITE_DATA | ((x) & 0xff))
#endif /* __ASM_ARCH_REGS_LCD_H */