| /* | 
 |  *	Low-Level PCI Support for the MPC-1211(CTP/PCI/MPC-SH02) | 
 |  * | 
 |  *  (c) 2002-2003 Saito.K & Jeanne | 
 |  * | 
 |  *  Dustin McIntire (dustin@sensoria.com) | 
 |  *	Derived from arch/i386/kernel/pci-*.c which bore the message: | 
 |  *	(c) 1999--2000 Martin Mares <mj@ucw.cz> | 
 |  *	 | 
 |  *  May be copied or modified under the terms of the GNU General Public | 
 |  *  License.  See linux/COPYING for more information. | 
 |  * | 
 |  */ | 
 | #include <linux/types.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/init.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/irq.h> | 
 | #include <linux/interrupt.h> | 
 |  | 
 | #include <asm/machvec.h> | 
 | #include <asm/io.h> | 
 | #include <asm/mpc1211/pci.h> | 
 |  | 
 | static struct resource mpcpci_io_resource = { | 
 | 	"MPCPCI IO", | 
 | 	0x00000000, | 
 | 	0xffffffff, | 
 | 	IORESOURCE_IO | 
 | }; | 
 |  | 
 | static struct resource mpcpci_mem_resource = { | 
 | 	"MPCPCI mem", | 
 | 	0x00000000, | 
 | 	0xffffffff, | 
 | 	IORESOURCE_MEM | 
 | }; | 
 |  | 
 | static struct pci_ops pci_direct_conf1; | 
 | struct pci_channel board_pci_channels[] = { | 
 | 	{&pci_direct_conf1, &mpcpci_io_resource, &mpcpci_mem_resource, 0, 256}, | 
 | 	{NULL, NULL, NULL, 0, 0}, | 
 | }; | 
 |  | 
 | /* | 
 |  * Direct access to PCI hardware... | 
 |  */ | 
 |  | 
 |  | 
 | #define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) | 
 |  | 
 | /* | 
 |  * Functions for accessing PCI configuration space with type 1 accesses | 
 |  */ | 
 | static int pci_conf1_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) | 
 | { | 
 | 	u32 word; | 
 | 	unsigned long flags; | 
 |  | 
 | 	/*  | 
 | 	 * PCIPDR may only be accessed as 32 bit words,  | 
 | 	 * so we must do byte alignment by hand  | 
 | 	 */ | 
 | 	local_irq_save(flags); | 
 | 	writel(CONFIG_CMD(bus,devfn,where), PCIPAR); | 
 | 	word = readl(PCIPDR); | 
 | 	local_irq_restore(flags); | 
 |  | 
 | 	switch (size) { | 
 | 	case 1: | 
 | 		switch (where & 0x3) { | 
 | 		case 3: | 
 | 			*value = (u8)(word >> 24); | 
 | 			break; | 
 | 		case 2: | 
 | 			*value = (u8)(word >> 16); | 
 | 			break; | 
 | 		case 1: | 
 | 			*value = (u8)(word >> 8); | 
 | 			break; | 
 | 		default: | 
 | 			*value = (u8)word; | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	case 2: | 
 | 		switch (where & 0x3) { | 
 | 		case 3: | 
 | 			*value = (u16)(word >> 24); | 
 | 			local_irq_save(flags); | 
 | 			writel(CONFIG_CMD(bus,devfn,(where+1)), PCIPAR); | 
 | 			word = readl(PCIPDR); | 
 | 			local_irq_restore(flags); | 
 | 			*value |= ((word & 0xff) << 8); | 
 | 			break; | 
 | 		case 2: | 
 | 			*value = (u16)(word >> 16); | 
 | 			break; | 
 | 		case 1: | 
 | 			*value = (u16)(word >> 8); | 
 | 			break; | 
 | 		default: | 
 | 			*value = (u16)word; | 
 | 			break; | 
 | 		} | 
 | 		break; | 
 | 	case 4: | 
 | 		*value = word; | 
 | 		break; | 
 | 	} | 
 | 	PCIDBG(4,"pci_conf1_read@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),*value);  | 
 | 	return PCIBIOS_SUCCESSFUL;     | 
 | } | 
 |  | 
 | /*  | 
 |  * Since MPC-1211 only does 32bit access we'll have to do a read,mask,write operation.   | 
 |  * We'll allow an odd byte offset, though it should be illegal. | 
 |  */  | 
 | static int pci_conf1_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) | 
 | { | 
 | 	u32 word,mask = 0; | 
 | 	unsigned long flags; | 
 | 	u32 shift = (where & 3) * 8; | 
 |  | 
 | 	if(size == 1) { | 
 | 		mask = ((1 << 8) - 1) << shift;  // create the byte mask | 
 | 	} else if(size == 2){ | 
 | 		if(shift == 24) | 
 | 			return PCIBIOS_BAD_REGISTER_NUMBER;            | 
 | 		mask = ((1 << 16) - 1) << shift;  // create the word mask | 
 | 	} | 
 | 	local_irq_save(flags); | 
 | 	writel(CONFIG_CMD(bus,devfn,where), PCIPAR); | 
 | 	if(size == 4){ | 
 | 		writel(value, PCIPDR); | 
 | 		local_irq_restore(flags); | 
 | 		PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),value); | 
 | 		return PCIBIOS_SUCCESSFUL; | 
 | 	} | 
 | 	word = readl(PCIPDR); | 
 | 	word &= ~mask; | 
 | 	word |= ((value << shift) & mask); | 
 | 	writel(word, PCIPDR); | 
 | 	local_irq_restore(flags); | 
 | 	PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),word); | 
 | 	return PCIBIOS_SUCCESSFUL; | 
 | } | 
 |  | 
 | #undef CONFIG_CMD | 
 |  | 
 | static struct pci_ops pci_direct_conf1 = { | 
 | 	.read =		pci_conf1_read, | 
 | 	.write = 	pci_conf1_write, | 
 | }; | 
 |  | 
 | static void __devinit quirk_ali_ide_ports(struct pci_dev *dev) | 
 | { | 
 |         dev->resource[0].start = 0x1f0; | 
 | 	dev->resource[0].end   = 0x1f7; | 
 | 	dev->resource[0].flags = IORESOURCE_IO; | 
 |         dev->resource[1].start = 0x3f6; | 
 | 	dev->resource[1].end   = 0x3f6; | 
 | 	dev->resource[1].flags = IORESOURCE_IO; | 
 |         dev->resource[2].start = 0x170; | 
 | 	dev->resource[2].end   = 0x177; | 
 | 	dev->resource[2].flags = IORESOURCE_IO; | 
 |         dev->resource[3].start = 0x376; | 
 | 	dev->resource[3].end   = 0x376; | 
 | 	dev->resource[3].flags = IORESOURCE_IO; | 
 |         dev->resource[4].start = 0xf000; | 
 | 	dev->resource[4].end   = 0xf00f; | 
 | 	dev->resource[4].flags = IORESOURCE_IO; | 
 | } | 
 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, quirk_ali_ide_ports); | 
 |  | 
 | char * __devinit pcibios_setup(char *str) | 
 | { | 
 | 	return str; | 
 | } | 
 |  | 
 | /* | 
 |  *  Called after each bus is probed, but before its children | 
 |  *  are examined. | 
 |  */ | 
 |  | 
 | void __devinit pcibios_fixup_bus(struct pci_bus *b) | 
 | { | 
 | 	pci_read_bridge_bases(b); | 
 | } | 
 |  | 
 | /*  | 
 |  * 	IRQ functions  | 
 |  */ | 
 | static inline u8 bridge_swizzle(u8 pin, u8 slot) | 
 | { | 
 |         return (((pin-1) + slot) % 4) + 1; | 
 | } | 
 |  | 
 | static inline u8 bridge_swizzle_pci_1(u8 pin, u8 slot) | 
 | { | 
 |         return (((pin-1) - slot) & 3) + 1; | 
 | } | 
 |  | 
 | static u8 __init mpc1211_swizzle(struct pci_dev *dev, u8 *pinp) | 
 | { | 
 | 	unsigned long flags; | 
 |         u8 pin = *pinp; | 
 | 	u32 word; | 
 |  | 
 | 	for ( ; dev->bus->self; dev = dev->bus->self) { | 
 | 		if (!pin) | 
 | 			continue; | 
 |  | 
 | 		if (dev->bus->number == 1) { | 
 | 			local_irq_save(flags); | 
 | 			writel(0x80000000 | 0x2c, PCIPAR); | 
 | 			word = readl(PCIPDR); | 
 | 			local_irq_restore(flags); | 
 | 			word >>= 16; | 
 |  | 
 | 			if (word == 0x0001) | 
 | 				pin = bridge_swizzle_pci_1(pin, PCI_SLOT(dev->devfn)); | 
 | 			else | 
 | 				pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); | 
 | 		} else | 
 | 			pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); | 
 | 	} | 
 |  | 
 | 	*pinp = pin; | 
 |  | 
 | 	return PCI_SLOT(dev->devfn); | 
 | } | 
 |  | 
 | static int __init map_mpc1211_irq(struct pci_dev *dev, u8 slot, u8 pin) | 
 | { | 
 | 	int irq = -1; | 
 |  | 
 | 	/* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */ | 
 | 	if (dev->bus->number == 0) { | 
 | 		switch (slot) { | 
 | 		case 13:   irq =  9; break;   /* USB */ | 
 | 		case 22:   irq = 10; break;   /* LAN */ | 
 | 		default:   irq =  0; break; | 
 | 	  	} | 
 | 	} else { | 
 | 		switch (pin) { | 
 | 		case 0:   irq =  0; break; | 
 | 		case 1:   irq =  7; break; | 
 | 		case 2:   irq =  9; break; | 
 | 		case 3:   irq = 10; break; | 
 | 		case 4:   irq = 11; break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if( irq < 0 ) { | 
 | 		PCIDBG(3, "PCI: Error mapping IRQ on device %s\n", pci_name(dev)); | 
 | 		return irq; | 
 | 	} | 
 | 	 | 
 | 	PCIDBG(2, "Setting IRQ for slot %s to %d\n", pci_name(dev), irq); | 
 |  | 
 | 	return irq; | 
 | } | 
 |  | 
 | void __init pcibios_fixup_irqs(void) | 
 | { | 
 | 	pci_fixup_irqs(mpc1211_swizzle, map_mpc1211_irq); | 
 | } | 
 |  | 
 | void pcibios_align_resource(void *data, struct resource *res, | 
 | 			    resource_size_t size, resource_size_t align) | 
 | { | 
 | 	resource_size_t start = res->start; | 
 |  | 
 | 	if (res->flags & IORESOURCE_IO) { | 
 | 		if (start >= 0x10000UL) { | 
 | 			if ((start & 0xffffUL) < 0x4000UL) { | 
 | 				start = (start & 0xffff0000UL) + 0x4000UL; | 
 | 			} else if ((start & 0xffffUL) >= 0xf000UL) { | 
 | 				start = (start & 0xffff0000UL) + 0x10000UL; | 
 | 			} | 
 | 			res->start = start; | 
 | 		} else { | 
 | 			if (start & 0x300) { | 
 | 				start = (start + 0x3ff) & ~0x3ff; | 
 | 				res->start = start; | 
 | 			} | 
 | 		} | 
 | 	} | 
 | } | 
 |  |