| /* Various workarounds for chipset bugs. | 
 |    This code runs very early and can't use the regular PCI subsystem | 
 |    The entries are keyed to PCI bridges which usually identify chipsets | 
 |    uniquely. | 
 |    This is only for whole classes of chipsets with specific problems which | 
 |    need early invasive action (e.g. before the timers are initialized). | 
 |    Most PCI device specific workarounds can be done later and should be | 
 |    in standard PCI quirks | 
 |    Mainboard specific bugs should be handled by DMI entries. | 
 |    CPU specific bugs in setup.c */ | 
 |  | 
 | #include <linux/pci.h> | 
 | #include <linux/acpi.h> | 
 | #include <linux/pci_ids.h> | 
 | #include <asm/pci-direct.h> | 
 | #include <asm/dma.h> | 
 | #include <asm/io_apic.h> | 
 | #include <asm/apic.h> | 
 |  | 
 | #ifdef CONFIG_GART_IOMMU | 
 | #include <asm/gart.h> | 
 | #endif | 
 |  | 
 | static void __init via_bugs(void) | 
 | { | 
 | #ifdef CONFIG_GART_IOMMU | 
 | 	if ((end_pfn > MAX_DMA32_PFN ||  force_iommu) && | 
 | 	    !gart_iommu_aperture_allowed) { | 
 | 		printk(KERN_INFO | 
 | 		       "Looks like a VIA chipset. Disabling IOMMU." | 
 | 		       " Override with iommu=allowed\n"); | 
 | 		gart_iommu_aperture_disabled = 1; | 
 | 	} | 
 | #endif | 
 | } | 
 |  | 
 | #ifdef CONFIG_ACPI | 
 | #ifdef CONFIG_X86_IO_APIC | 
 |  | 
 | static int __init nvidia_hpet_check(struct acpi_table_header *header) | 
 | { | 
 | 	return 0; | 
 | } | 
 | #endif /* CONFIG_X86_IO_APIC */ | 
 | #endif /* CONFIG_ACPI */ | 
 |  | 
 | static void __init nvidia_bugs(void) | 
 | { | 
 | #ifdef CONFIG_ACPI | 
 | #ifdef CONFIG_X86_IO_APIC | 
 | 	/* | 
 | 	 * All timer overrides on Nvidia are | 
 | 	 * wrong unless HPET is enabled. | 
 | 	 * Unfortunately that's not true on many Asus boards. | 
 | 	 * We don't know yet how to detect this automatically, but | 
 | 	 * at least allow a command line override. | 
 | 	 */ | 
 | 	if (acpi_use_timer_override) | 
 | 		return; | 
 |  | 
 | 	if (acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check)) { | 
 | 		acpi_skip_timer_override = 1; | 
 | 		printk(KERN_INFO "Nvidia board " | 
 | 		       "detected. Ignoring ACPI " | 
 | 		       "timer override.\n"); | 
 | 		printk(KERN_INFO "If you got timer trouble " | 
 | 			"try acpi_use_timer_override\n"); | 
 | 	} | 
 | #endif | 
 | #endif | 
 | 	/* RED-PEN skip them on mptables too? */ | 
 |  | 
 | } | 
 |  | 
 | static void __init ati_bugs(void) | 
 | { | 
 | #ifdef CONFIG_X86_IO_APIC | 
 | 	if (timer_over_8254 == 1) { | 
 | 		timer_over_8254 = 0; | 
 | 		printk(KERN_INFO | 
 | 		"ATI board detected. Disabling timer routing over 8254.\n"); | 
 | 	} | 
 | #endif | 
 | } | 
 |  | 
 | struct chipset { | 
 | 	u16 vendor; | 
 | 	void (*f)(void); | 
 | }; | 
 |  | 
 | static struct chipset early_qrk[] __initdata = { | 
 | 	{ PCI_VENDOR_ID_NVIDIA, nvidia_bugs }, | 
 | 	{ PCI_VENDOR_ID_VIA, via_bugs }, | 
 | 	{ PCI_VENDOR_ID_ATI, ati_bugs }, | 
 | 	{} | 
 | }; | 
 |  | 
 | void __init early_quirks(void) | 
 | { | 
 | 	int num, slot, func; | 
 |  | 
 | 	if (!early_pci_allowed()) | 
 | 		return; | 
 |  | 
 | 	/* Poor man's PCI discovery */ | 
 | 	for (num = 0; num < 32; num++) { | 
 | 		for (slot = 0; slot < 32; slot++) { | 
 | 			for (func = 0; func < 8; func++) { | 
 | 				u32 class; | 
 | 				u32 vendor; | 
 | 				u8 type; | 
 | 				int i; | 
 | 				class = read_pci_config(num,slot,func, | 
 | 							PCI_CLASS_REVISION); | 
 | 				if (class == 0xffffffff) | 
 | 					break; | 
 |  | 
 | 				if ((class >> 16) != PCI_CLASS_BRIDGE_PCI) | 
 | 					continue; | 
 |  | 
 | 				vendor = read_pci_config(num, slot, func, | 
 | 							 PCI_VENDOR_ID); | 
 | 				vendor &= 0xffff; | 
 |  | 
 | 				for (i = 0; early_qrk[i].f; i++) | 
 | 					if (early_qrk[i].vendor == vendor) { | 
 | 						early_qrk[i].f(); | 
 | 						return; | 
 | 					} | 
 |  | 
 | 				type = read_pci_config_byte(num, slot, func, | 
 | 							    PCI_HEADER_TYPE); | 
 | 				if (!(type & 0x80)) | 
 | 					break; | 
 | 			} | 
 | 		} | 
 | 	} | 
 | } |