)]}'
{
  "commit": "3c9666cc18be1fc11698fc0181e124b44889cf37",
  "tree": "c705c85228a0380ceee588d7b85dcbfc10d1a6c6",
  "parents": [
    "ab3c81ff639fbee4ab32af84c809d283b773084a"
  ],
  "author": {
    "name": "matthieu castet",
    "email": "castet.matthieu@free.fr",
    "time": "Wed Jan 18 07:38:19 2006 +0100"
  },
  "committer": {
    "name": "Greg Kroah-Hartman",
    "email": "gregkh@suse.de",
    "time": "Tue Jan 31 17:23:40 2006 -0800"
  },
  "message": "[PATCH] UEAGLE : add iso support\n\nThis patch adds the support for isochronous pipe.\n\nA new module parameter is added to select iso mode.  It is set to iso by\ndefault because bulk mode doesn\u0027t work well at high speed rate (\u003e3 Mbps\nfor upload).\n\nWe use UDSL_IGNORE_EILSEQ flags because ADI firmware doesn\u0027t reply to\nISO IN when it has nothing to send [1].\n\n[1]\nfrom cypress datasheet :\n\nThe ISOSEND0 Bit (bit 7 in the USBPAIR Register) is used when the EZ-USB\nFX chip receives an isochronous IN token while the IN FIFO is empty. If\nISOSEND0\u003d0 (the default value), the USB core does not respond to the IN\ntoken. If ISOSEND0\u003d1, the USB core sends a zero-length data packet in\nresponse to the IN token. The action to take depends on the overall\nsystem design. The ISOSEND0 Bit applies to all of the isochronous IN\nendpoints, IN-8 through IN-15.\n\nSigned-off-by: Matthieu CASTET \u003ccastet.matthieu@free.fr\u003e\nSigned-off-by: Greg Kroah-Hartman \u003cgregkh@suse.de\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "4362cfd801b5390f3b75bc845d2e01449d4955ed",
      "old_mode": 33188,
      "old_path": "drivers/usb/atm/ueagle-atm.c",
      "new_id": "ea7dfe0c827596052711efd08cb73e9635c86853",
      "new_mode": 33188,
      "new_path": "drivers/usb/atm/ueagle-atm.c"
    }
  ]
}