[SCSI] bfa: Added HBA diagnostics support.
- Added diagnostics sub-module to BFA.
- Implemented interface to perform memtest/loopback test
and some other diagnostics tests.
Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/bfa/bfi.h b/drivers/scsi/bfa/bfi.h
index b7eb3dc..efa41b6 100644
--- a/drivers/scsi/bfa/bfi.h
+++ b/drivers/scsi/bfa/bfi.h
@@ -190,6 +190,7 @@
*/
enum bfi_mclass {
BFI_MC_IOC = 1, /* IO Controller (IOC) */
+ BFI_MC_DIAG = 2, /* Diagnostic Msgs */
BFI_MC_FLASH = 3, /* Flash message class */
BFI_MC_CEE = 4, /* CEE */
BFI_MC_FCPORT = 5, /* FC port */
@@ -339,7 +340,7 @@
((u32)(__p1_mode)))
#define BFI_FWBOOT_TYPE_NORMAL 0
-#define BFI_FWBOOT_TYPE_MEMTEST 1
+#define BFI_FWBOOT_TYPE_MEMTEST 2
#define BFI_FWBOOT_ENV_OS 0
enum bfi_port_mode {
@@ -923,6 +924,112 @@
u32 status;
};
+/*
+ *----------------------------------------------------------------------
+ * DIAG
+ *----------------------------------------------------------------------
+ */
+enum bfi_diag_h2i {
+ BFI_DIAG_H2I_PORTBEACON = 1,
+ BFI_DIAG_H2I_LOOPBACK = 2,
+ BFI_DIAG_H2I_FWPING = 3,
+ BFI_DIAG_H2I_TEMPSENSOR = 4,
+ BFI_DIAG_H2I_LEDTEST = 5,
+ BFI_DIAG_H2I_QTEST = 6,
+};
+
+enum bfi_diag_i2h {
+ BFI_DIAG_I2H_PORTBEACON = BFA_I2HM(BFI_DIAG_H2I_PORTBEACON),
+ BFI_DIAG_I2H_LOOPBACK = BFA_I2HM(BFI_DIAG_H2I_LOOPBACK),
+ BFI_DIAG_I2H_FWPING = BFA_I2HM(BFI_DIAG_H2I_FWPING),
+ BFI_DIAG_I2H_TEMPSENSOR = BFA_I2HM(BFI_DIAG_H2I_TEMPSENSOR),
+ BFI_DIAG_I2H_LEDTEST = BFA_I2HM(BFI_DIAG_H2I_LEDTEST),
+ BFI_DIAG_I2H_QTEST = BFA_I2HM(BFI_DIAG_H2I_QTEST),
+};
+
+#define BFI_DIAG_MAX_SGES 2
+#define BFI_DIAG_DMA_BUF_SZ (2 * 1024)
+#define BFI_BOOT_MEMTEST_RES_ADDR 0x900
+#define BFI_BOOT_MEMTEST_RES_SIG 0xA0A1A2A3
+
+struct bfi_diag_lb_req_s {
+ struct bfi_mhdr_s mh;
+ u32 loopcnt;
+ u32 pattern;
+ u8 lb_mode; /*!< bfa_port_opmode_t */
+ u8 speed; /*!< bfa_port_speed_t */
+ u8 rsvd[2];
+};
+
+struct bfi_diag_lb_rsp_s {
+ struct bfi_mhdr_s mh; /* 4 bytes */
+ struct bfa_diag_loopback_result_s res; /* 16 bytes */
+};
+
+struct bfi_diag_fwping_req_s {
+ struct bfi_mhdr_s mh; /* 4 bytes */
+ struct bfi_alen_s alen; /* 12 bytes */
+ u32 data; /* user input data pattern */
+ u32 count; /* user input dma count */
+ u8 qtag; /* track CPE vc */
+ u8 rsv[3];
+};
+
+struct bfi_diag_fwping_rsp_s {
+ struct bfi_mhdr_s mh; /* 4 bytes */
+ u32 data; /* user input data pattern */
+ u8 qtag; /* track CPE vc */
+ u8 dma_status; /* dma status */
+ u8 rsv[2];
+};
+
+/*
+ * Temperature Sensor
+ */
+struct bfi_diag_ts_req_s {
+ struct bfi_mhdr_s mh; /* 4 bytes */
+ u16 temp; /* 10-bit A/D value */
+ u16 brd_temp; /* 9-bit board temp */
+ u8 status;
+ u8 ts_junc; /* show junction tempsensor */
+ u8 ts_brd; /* show board tempsensor */
+ u8 rsv;
+};
+#define bfi_diag_ts_rsp_t struct bfi_diag_ts_req_s
+
+struct bfi_diag_ledtest_req_s {
+ struct bfi_mhdr_s mh; /* 4 bytes */
+ u8 cmd;
+ u8 color;
+ u8 portid;
+ u8 led; /* bitmap of LEDs to be tested */
+ u16 freq; /* no. of blinks every 10 secs */
+ u8 rsv[2];
+};
+
+/* notify host led operation is done */
+struct bfi_diag_ledtest_rsp_s {
+ struct bfi_mhdr_s mh; /* 4 bytes */
+};
+
+struct bfi_diag_portbeacon_req_s {
+ struct bfi_mhdr_s mh; /* 4 bytes */
+ u32 period; /* beaconing period */
+ u8 beacon; /* 1: beacon on */
+ u8 rsvd[3];
+};
+
+/* notify host the beacon is off */
+struct bfi_diag_portbeacon_rsp_s {
+ struct bfi_mhdr_s mh; /* 4 bytes */
+};
+
+struct bfi_diag_qtest_req_s {
+ struct bfi_mhdr_s mh; /* 4 bytes */
+ u32 data[BFI_LMSG_PL_WSZ]; /* fill up tcm prefetch area */
+};
+#define bfi_diag_qtest_rsp_t struct bfi_diag_qtest_req_s
+
#pragma pack()
#endif /* __BFI_H__ */