Initial Contribution
msm-2.6.38: tag AU_LINUX_ANDROID_GINGERBREAD.02.03.04.00.142
Signed-off-by: Bryan Huntsman <bryanh@codeaurora.org>
diff --git a/include/linux/cyttsp.h b/include/linux/cyttsp.h
new file mode 100644
index 0000000..0644f1a
--- /dev/null
+++ b/include/linux/cyttsp.h
@@ -0,0 +1,679 @@
+/* Header file for:
+ * Cypress TrueTouch(TM) Standard Product touchscreen drivers.
+ * include/linux/cyttsp.h
+ *
+ * Copyright (C) 2009, 2010 Cypress Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Cypress reserves the right to make changes without further notice
+ * to the materials described herein. Cypress does not assume any
+ * liability arising out of the application described herein.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com
+ *
+ */
+
+
+#ifndef __CYTTSP_H__
+#define __CYTTSP_H__
+
+#include <linux/input.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+
+#define CYPRESS_TTSP_NAME "cyttsp"
+#define CY_I2C_NAME "cyttsp-i2c"
+#define CY_SPI_NAME "cyttsp-spi"
+
+#ifdef CY_DECLARE_GLOBALS
+ uint32_t cyttsp_tsdebug;
+ module_param_named(tsdebug, cyttsp_tsdebug, uint, 0664);
+ uint32_t cyttsp_tsxdebug;
+ module_param_named(tsxdebug, cyttsp_tsxdebug, uint, 0664);
+
+ uint32_t cyttsp_disable_touch;
+ module_param_named(disable_touch, cyttsp_disable_touch, uint, 0664);
+#else
+ extern uint32_t cyttsp_tsdebug;
+ extern uint32_t cyttsp_tsxdebug;
+ extern uint32_t cyttsp_disable_touch;
+#endif
+
+
+
+/******************************************************************************
+ * Global Control, Used to control the behavior of the driver
+ */
+
+/* defines for Gen2 (Txx2xx); Gen3 (Txx3xx)
+ * use these defines to set cyttsp_platform_data.gen in board config file
+ */
+#define CY_GEN2 2
+#define CY_GEN3 3
+
+/* define for using I2C driver
+ */
+#define CY_USE_I2C_DRIVER
+
+/* defines for using SPI driver */
+/*
+#define CY_USE_SPI_DRIVER
+ */
+#define CY_SPI_DFLT_SPEED_HZ 1000000
+#define CY_SPI_MAX_SPEED_HZ 4000000
+#define CY_SPI_SPEED_HZ CY_SPI_DFLT_SPEED_HZ
+#define CY_SPI_BITS_PER_WORD 8
+#define CY_SPI_DAV 139 /* set correct gpio id */
+#define CY_SPI_BUFSIZE 512
+
+/* Voltage and Current ratings */
+#define CY_TMA300_VTG_MAX_UV 5500000
+#define CY_TMA300_VTG_MIN_UV 1710000
+#define CY_TMA300_CURR_24HZ_UA 17500
+#define CY_I2C_VTG_MAX_UV 1800000
+#define CY_I2C_VTG_MIN_UV 1800000
+#define CY_I2C_CURR_UA 9630
+
+
+/* define for inclusion of TTSP App Update Load File
+ * use this define if update to the TTSP Device is desired
+ */
+/*
+#define CY_INCLUDE_LOAD_FILE
+*/
+
+/* define if force new load file for bootloader load */
+/*
+#define CY_FORCE_FW_UPDATE
+*/
+
+/* undef for production use */
+/*
+#define CY_USE_DEBUG
+*/
+
+/* undef for irq use; use this define in the board configuration file */
+/*
+#define CY_USE_TIMER
+ */
+
+/* undef to allow use of extra debug capability */
+/*
+#define CY_ALLOW_EXTRA_DEBUG
+*/
+
+/* undef to remove additional debug prints */
+/*
+#define CY_USE_EXTRA_DEBUG
+*/
+
+/* undef to remove additional debug prints */
+/*
+#define CY_USE_EXTRA_DEBUG1
+ */
+
+/* undef to use operational touch timer jiffies; else use test jiffies */
+/*
+ */
+#define CY_USE_TIMER_DEBUG
+
+/* define to use canned test data */
+/*
+#define CY_USE_TEST_DATA
+ */
+
+/* define to activate power management */
+/*
+#define CY_USE_LOW_POWER
+ */
+
+/* define if wake on i2c addr is activated */
+/*
+#define CY_USE_DEEP_SLEEP
+ */
+
+/* define if gesture signaling is used
+ * and which gesture groups to use
+ */
+/*
+#define CY_USE_GEST
+#define CY_USE_GEST_GRP1
+#define CY_USE_GEST_GRP2
+#define CY_USE_GEST_GRP3
+#define CY_USE_GEST_GRP4
+ */
+/* Active distance in pixels for a gesture to be reported
+ * if set to 0, then all gesture movements are reported
+ */
+#define CY_ACT_DIST_DFLT 8
+#define CY_ACT_DIST CY_ACT_DIST_DFLT
+
+/* define if MT signals are desired */
+/*
+*/
+#define CY_USE_MT_SIGNALS
+
+/* define if MT tracking id signals are used */
+/*
+#define CY_USE_MT_TRACK_ID
+ */
+
+/* define if ST signals are required */
+/*
+*/
+#define CY_USE_ST_SIGNALS
+
+/* define to send handshake to device */
+/*
+*/
+#define CY_USE_HNDSHK
+
+/* define if log all raw motion signals to a sysfs file */
+/*
+#define CY_LOG_TO_FILE
+*/
+
+
+/* End of the Global Control section
+ ******************************************************************************
+ */
+#define CY_DIFF(m, n) ((m) != (n))
+
+#ifdef CY_LOG_TO_FILE
+ #define cyttsp_openlog() /* use sysfs */
+#else
+ #define cyttsp_openlog()
+#endif /* CY_LOG_TO_FILE */
+
+/* see kernel.h for pr_xxx def'ns */
+#define cyttsp_info(f, a...) pr_info("%s:" f, __func__ , ## a)
+#define cyttsp_error(f, a...) pr_err("%s:" f, __func__ , ## a)
+#define cyttsp_alert(f, a...) pr_alert("%s:" f, __func__ , ## a)
+
+#ifdef CY_USE_DEBUG
+ #define cyttsp_debug(f, a...) pr_alert("%s:" f, __func__ , ## a)
+#else
+ #define cyttsp_debug(f, a...) {if (cyttsp_tsdebug) \
+ pr_alert("%s:" f, __func__ , ## a); }
+#endif /* CY_USE_DEBUG */
+
+#ifdef CY_ALLOW_EXTRA_DEBUG
+#ifdef CY_USE_EXTRA_DEBUG
+ #define cyttsp_xdebug(f, a...) pr_alert("%s:" f, __func__ , ## a)
+#else
+ #define cyttsp_xdebug(f, a...) {if (cyttsp_tsxdebug) \
+ pr_alert("%s:" f, __func__ , ## a); }
+#endif /* CY_USE_EXTRA_DEBUG */
+
+#ifdef CY_USE_EXTRA_DEBUG1
+ #define cyttsp_xdebug1(f, a...) pr_alert("%s:" f, __func__ , ## a)
+#else
+ #define cyttsp_xdebug1(f, a...)
+#endif /* CY_USE_EXTRA_DEBUG1 */
+#else
+ #define cyttsp_xdebug(f, a...)
+ #define cyttsp_xdebug1(f, a...)
+#endif /* CY_ALLOW_EXTRA_DEBUG */
+
+#ifdef CY_USE_TIMER_DEBUG
+ #define TOUCHSCREEN_TIMEOUT (msecs_to_jiffies(1000))
+#else
+ #define TOUCHSCREEN_TIMEOUT (msecs_to_jiffies(28))
+#endif
+
+/* reduce extra signals in MT only build
+ * be careful not to lose backward compatibility for pre-MT apps
+ */
+#ifdef CY_USE_ST_SIGNALS
+ #define CY_USE_ST 1
+#else
+ #define CY_USE_ST 0
+#endif /* CY_USE_ST_SIGNALS */
+
+/* rely on kernel input.h to define Multi-Touch capability */
+/* if input.h defines the Multi-Touch signals, then use MT */
+#if defined(ABS_MT_TOUCH_MAJOR) && defined(CY_USE_MT_SIGNALS)
+ #define CY_USE_MT 1
+ #define CY_MT_SYNC(input) input_mt_sync(input)
+#else
+ #define CY_USE_MT 0
+ #define CY_MT_SYNC(input)
+ /* the following includes are provided to ensure a compile;
+ * the code that compiles with these defines will not be executed if
+ * the CY_USE_MT is properly used in the platform structure init
+ */
+ #ifndef ABS_MT_TOUCH_MAJOR
+ #define ABS_MT_TOUCH_MAJOR 0x30 /* touching ellipse */
+ #define ABS_MT_TOUCH_MINOR 0x31 /* (omit if circular) */
+ #define ABS_MT_WIDTH_MAJOR 0x32 /* approaching ellipse */
+ #define ABS_MT_WIDTH_MINOR 0x33 /* (omit if circular) */
+ #define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
+ #define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */
+ #define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */
+ #define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
+ #define ABS_MT_BLOB_ID 0x38 /* Group set of pkts as blob */
+ #endif /* ABS_MT_TOUCH_MAJOR */
+#endif /* ABS_MT_TOUCH_MAJOR and CY_USE_MT_SIGNALS */
+#if defined(ABS_MT_TRACKING_ID) && defined(CY_USE_MT_TRACK_ID)
+ #define CY_USE_TRACKING_ID 1
+#else
+ #define CY_USE_TRACKING_ID 0
+/* define only if not defined already by system;
+ * value based on linux kernel 2.6.30.10
+ */
+#ifndef ABS_MT_TRACKING_ID
+ #define ABS_MT_TRACKING_ID (ABS_MT_BLOB_ID+1)
+#endif
+#endif /* ABS_MT_TRACKING_ID */
+
+#ifdef CY_USE_DEEP_SLEEP
+ #define CY_USE_DEEP_SLEEP_SEL 0x80
+#else
+ #define CY_USE_DEEP_SLEEP_SEL 0x00
+#endif
+#ifdef CY_USE_LOW_POWER
+ #define CY_USE_SLEEP (CY_USE_DEEP_SLEEP_SEL | 0x01)
+#else
+ #define CY_USE_SLEEP 0x00
+#endif /* CY_USE_LOW_POWER */
+
+#ifdef CY_USE_TEST_DATA
+ #define cyttsp_testdat(ray1, ray2, sizeofray) \
+ { \
+ int i; \
+ u8 *up1 = (u8 *)ray1; \
+ u8 *up2 = (u8 *)ray2; \
+ for (i = 0; i < sizeofray; i++) { \
+ up1[i] = up2[i]; \
+ } \
+ }
+#else
+ #define cyttsp_testdat(xy, test_xy, sizeofray)
+#endif /* CY_USE_TEST_DATA */
+
+/* helper macros */
+#define GET_NUM_TOUCHES(x) ((x) & 0x0F)
+#define GET_TOUCH1_ID(x) (((x) & 0xF0) >> 4)
+#define GET_TOUCH2_ID(x) ((x) & 0x0F)
+#define GET_TOUCH3_ID(x) (((x) & 0xF0) >> 4)
+#define GET_TOUCH4_ID(x) ((x) & 0x0F)
+#define IS_LARGE_AREA(x) (((x) & 0x10) >> 4)
+#define FLIP_DATA_FLAG 0x01
+#define REVERSE_X_FLAG 0x02
+#define REVERSE_Y_FLAG 0x04
+#define FLIP_DATA(flags) ((flags) & FLIP_DATA_FLAG)
+#define REVERSE_X(flags) ((flags) & REVERSE_X_FLAG)
+#define REVERSE_Y(flags) ((flags) & REVERSE_Y_FLAG)
+#define FLIP_XY(x, y) { \
+ u16 tmp; \
+ tmp = (x); \
+ (x) = (y); \
+ (y) = tmp; \
+ }
+#define INVERT_X(x, xmax) ((xmax) - (x))
+#define INVERT_Y(y, maxy) ((maxy) - (y))
+#define SET_HSTMODE(reg, mode) ((reg) & (mode))
+#define GET_HSTMODE(reg) ((reg & 0x70) >> 4)
+#define GET_BOOTLOADERMODE(reg) ((reg & 0x10) >> 4)
+
+/* constant definitions */
+/* maximum number of concurrent ST track IDs */
+#define CY_NUM_ST_TCH_ID 2
+
+/* maximum number of concurrent MT track IDs */
+#define CY_NUM_MT_TCH_ID 4
+
+/* maximum number of track IDs */
+#define CY_NUM_TRK_ID 16
+
+#define CY_NTCH 0 /* no touch (lift off) */
+#define CY_TCH 1 /* active touch (touchdown) */
+#define CY_ST_FNGR1_IDX 0
+#define CY_ST_FNGR2_IDX 1
+#define CY_MT_TCH1_IDX 0
+#define CY_MT_TCH2_IDX 1
+#define CY_MT_TCH3_IDX 2
+#define CY_MT_TCH4_IDX 3
+#define CY_XPOS 0
+#define CY_YPOS 1
+#define CY_IGNR_TCH (-1)
+#define CY_SMALL_TOOL_WIDTH 10
+#define CY_LARGE_TOOL_WIDTH 255
+#define CY_REG_BASE 0x00
+#define CY_REG_GEST_SET 0x1E
+#define CY_REG_ACT_INTRVL 0x1D
+#define CY_REG_TCH_TMOUT (CY_REG_ACT_INTRVL+1)
+#define CY_REG_LP_INTRVL (CY_REG_TCH_TMOUT+1)
+#define CY_SOFT_RESET ((1 << 0))
+#define CY_DEEP_SLEEP ((1 << 1))
+#define CY_LOW_POWER ((1 << 2))
+#define CY_MAXZ 255
+#define CY_OK 0
+#define CY_INIT 1
+#define CY_DLY_DFLT 10 /* ms */
+#define CY_DLY_SYSINFO 20 /* ms */
+#define CY_DLY_BL 300
+#define CY_DLY_DNLOAD 100 /* ms */
+#define CY_NUM_RETRY 4 /* max num touch data read */
+
+/* handshake bit in the hst_mode reg */
+#define CY_HNDSHK_BIT 0x80
+#ifdef CY_USE_HNDSHK
+ #define CY_SEND_HNDSHK 1
+#else
+ #define CY_SEND_HNDSHK 0
+#endif
+
+/* Bootloader File 0 offset */
+#define CY_BL_FILE0 0x00
+
+/* Bootloader command directive */
+#define CY_BL_CMD 0xFF
+
+/* Bootloader Initiate Bootload */
+#define CY_BL_INIT_LOAD 0x38
+
+/* Bootloader Write a Block */
+#define CY_BL_WRITE_BLK 0x39
+
+/* Bootloader Terminate Bootload */
+#define CY_BL_TERMINATE 0x3B
+
+/* Bootloader Exit and Verify Checksum command */
+#define CY_BL_EXIT 0xA5
+
+/* Bootloader default keys */
+#define CY_BL_KEY0 0x00
+#define CY_BL_KEY1 0x01
+#define CY_BL_KEY2 0x02
+#define CY_BL_KEY3 0x03
+#define CY_BL_KEY4 0x04
+#define CY_BL_KEY5 0x05
+#define CY_BL_KEY6 0x06
+#define CY_BL_KEY7 0x07
+
+/* Active Power state scanning/processing refresh interval */
+#define CY_ACT_INTRVL_DFLT 0x00
+
+/* touch timeout for the Active power */
+#define CY_TCH_TMOUT_DFLT 0xFF
+
+/* Low Power state scanning/processing refresh interval */
+#define CY_LP_INTRVL_DFLT 0x0A
+
+#define CY_IDLE_STATE 0
+#define CY_ACTIVE_STATE 1
+#define CY_LOW_PWR_STATE 2
+#define CY_SLEEP_STATE 3
+
+/* device mode bits */
+#define CY_OP_MODE 0x00
+#define CY_SYSINFO_MODE 0x10
+
+/* power mode select bits */
+#define CY_SOFT_RESET_MODE 0x01 /* return to Bootloader mode */
+#define CY_DEEP_SLEEP_MODE 0x02
+#define CY_LOW_PWR_MODE 0x04
+
+#define CY_NUM_KEY 8
+
+#ifdef CY_USE_GEST
+ #define CY_USE_GESTURES 1
+#else
+ #define CY_USE_GESTURES 0
+#endif /* CY_USE_GESTURE_SIGNALS */
+
+#ifdef CY_USE_GEST_GRP1
+ #define CY_GEST_GRP1 0x10
+#else
+ #define CY_GEST_GRP1 0x00
+#endif /* CY_USE_GEST_GRP1 */
+#ifdef CY_USE_GEST_GRP2
+ #define CY_GEST_GRP2 0x20
+#else
+ #define CY_GEST_GRP2 0x00
+#endif /* CY_USE_GEST_GRP2 */
+#ifdef CY_USE_GEST_GRP3
+ #define CY_GEST_GRP3 0x40
+#else
+ #define CY_GEST_GRP3 0x00
+#endif /* CY_USE_GEST_GRP3 */
+#ifdef CY_USE_GEST_GRP4
+ #define CY_GEST_GRP4 0x80
+#else
+ #define CY_GEST_GRP4 0x00
+#endif /* CY_USE_GEST_GRP4 */
+
+struct cyttsp_regulator {
+ const char *name;
+ u32 min_uV;
+ u32 max_uV;
+ u32 load_uA;
+};
+
+struct cyttsp_platform_data {
+ u32 panel_maxx;
+ u32 panel_maxy;
+ u32 disp_resx;
+ u32 disp_resy;
+ u32 disp_minx;
+ u32 disp_miny;
+ u32 disp_maxx;
+ u32 disp_maxy;
+ u8 correct_fw_ver;
+ u32 flags;
+ u8 gen;
+ u8 use_st;
+ u8 use_mt;
+ u8 use_hndshk;
+ u8 use_trk_id;
+ u8 use_sleep;
+ u8 use_gestures;
+ u8 gest_set;
+ u8 act_intrvl;
+ u8 tch_tmout;
+ u8 lp_intrvl;
+ u8 power_state;
+ bool wakeup;
+ int sleep_gpio;
+ int resout_gpio;
+ int irq_gpio;
+ struct cyttsp_regulator *regulator_info;
+ u8 num_regulators;
+ const char *fw_fname;
+#ifdef CY_USE_I2C_DRIVER
+ s32 (*init)(struct i2c_client *client);
+ s32 (*resume)(struct i2c_client *client);
+#endif
+#ifdef CY_USE_SPI_DRIVER
+ s32 (*init)(struct spi_device *spi);
+ s32 (*resume)(struct spi_device *spi);
+#endif
+};
+
+/* TrueTouch Standard Product Gen3 (Txx3xx) interface definition */
+struct cyttsp_gen3_xydata_t {
+ u8 hst_mode;
+ u8 tt_mode;
+ u8 tt_stat;
+ u16 x1 __attribute__ ((packed));
+ u16 y1 __attribute__ ((packed));
+ u8 z1;
+ u8 touch12_id;
+ u16 x2 __attribute__ ((packed));
+ u16 y2 __attribute__ ((packed));
+ u8 z2;
+ u8 gest_cnt;
+ u8 gest_id;
+ u16 x3 __attribute__ ((packed));
+ u16 y3 __attribute__ ((packed));
+ u8 z3;
+ u8 touch34_id;
+ u16 x4 __attribute__ ((packed));
+ u16 y4 __attribute__ ((packed));
+ u8 z4;
+ u8 tt_undef[3];
+ u8 gest_set;
+ u8 tt_reserved;
+};
+
+/* TrueTouch Standard Product Gen2 (Txx2xx) interface definition */
+#define CY_GEN2_NOTOUCH 0x03 /* Both touches removed */
+#define CY_GEN2_GHOST 0x02 /* ghost */
+#define CY_GEN2_2TOUCH 0x03 /* 2 touch; no ghost */
+#define CY_GEN2_1TOUCH 0x01 /* 1 touch only */
+#define CY_GEN2_TOUCH2 0x01 /* 1st touch removed;
+ * 2nd touch remains */
+struct cyttsp_gen2_xydata_t {
+ u8 hst_mode;
+ u8 tt_mode;
+ u8 tt_stat;
+ u16 x1 __attribute__ ((packed));
+ u16 y1 __attribute__ ((packed));
+ u8 z1;
+ u8 evnt_idx;
+ u16 x2 __attribute__ ((packed));
+ u16 y2 __attribute__ ((packed));
+ u8 tt_undef1;
+ u8 gest_cnt;
+ u8 gest_id;
+ u8 tt_undef[14];
+ u8 gest_set;
+ u8 tt_reserved;
+};
+
+/* TTSP System Information interface definition */
+struct cyttsp_sysinfo_data_t {
+ u8 hst_mode;
+ u8 mfg_cmd;
+ u8 mfg_stat;
+ u8 cid[3];
+ u8 tt_undef1;
+ u8 uid[8];
+ u8 bl_verh;
+ u8 bl_verl;
+ u8 tts_verh;
+ u8 tts_verl;
+ u8 app_idh;
+ u8 app_idl;
+ u8 app_verh;
+ u8 app_verl;
+ u8 tt_undef[6];
+ u8 act_intrvl;
+ u8 tch_tmout;
+ u8 lp_intrvl;
+};
+
+/* TTSP Bootloader Register Map interface definition */
+#define CY_BL_CHKSUM_OK 0x01
+struct cyttsp_bootloader_data_t {
+ u8 bl_file;
+ u8 bl_status;
+ u8 bl_error;
+ u8 blver_hi;
+ u8 blver_lo;
+ u8 bld_blver_hi;
+ u8 bld_blver_lo;
+ u8 ttspver_hi;
+ u8 ttspver_lo;
+ u8 appid_hi;
+ u8 appid_lo;
+ u8 appver_hi;
+ u8 appver_lo;
+ u8 cid_0;
+ u8 cid_1;
+ u8 cid_2;
+};
+
+#define cyttsp_wake_data_t cyttsp_gen3_xydata_t
+#ifdef CY_DECLARE_GLOBALS
+ #ifdef CY_INCLUDE_LOAD_FILE
+ /* this file declares:
+ * firmware download block array (cyttsp_fw[]),
+ * the number of command block records (cyttsp_fw_records),
+ * and the version variables
+ */
+ #include "cyttsp_fw.h" /* imports cyttsp_fw[] array */
+ #define cyttsp_app_load() 1
+ #ifdef CY_FORCE_FW_UPDATE
+ #define cyttsp_force_fw_load() 1
+ #else
+ #define cyttsp_force_fw_load() 0
+ #endif
+
+ #else
+ /* the following declarations are to allow
+ * some debugging capability
+ */
+ unsigned char cyttsp_fw_tts_verh = 0x00;
+ unsigned char cyttsp_fw_tts_verl = 0x01;
+ unsigned char cyttsp_fw_app_idh = 0x02;
+ unsigned char cyttsp_fw_app_idl = 0x03;
+ unsigned char cyttsp_fw_app_verh = 0x04;
+ unsigned char cyttsp_fw_app_verl = 0x05;
+ unsigned char cyttsp_fw_cid_0 = 0x06;
+ unsigned char cyttsp_fw_cid_1 = 0x07;
+ unsigned char cyttsp_fw_cid_2 = 0x08;
+ #define cyttsp_app_load() 0
+ #define cyttsp_force_fw_load() 0
+ #endif
+ #define cyttsp_tts_verh() cyttsp_fw_tts_verh
+ #define cyttsp_tts_verl() cyttsp_fw_tts_verl
+ #define cyttsp_app_idh() cyttsp_fw_app_idh
+ #define cyttsp_app_idl() cyttsp_fw_app_idl
+ #define cyttsp_app_verh() cyttsp_fw_app_verh
+ #define cyttsp_app_verl() cyttsp_fw_app_verl
+ #define cyttsp_cid_0() cyttsp_fw_cid_0
+ #define cyttsp_cid_1() cyttsp_fw_cid_1
+ #define cyttsp_cid_2() cyttsp_fw_cid_2
+ #ifdef CY_USE_TEST_DATA
+ static struct cyttsp_gen2_xydata_t tt_gen2_testray[] = {
+ {0x00}, {0x00}, {0x04},
+ {0x4000}, {0x8000}, {0x80},
+ {0x03},
+ {0x2000}, {0x1000}, {0x00},
+ {0x00},
+ {0x00},
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+ {0x00},
+ {0x00}
+ };
+
+ static struct cyttsp_gen3_xydata_t tt_gen3_testray[] = {
+ {0x00}, {0x00}, {0x04},
+ {0x4000}, {0x8000}, {0x80},
+ {0x12},
+ {0x2000}, {0x1000}, {0xA0},
+ {0x00}, {0x00},
+ {0x8000}, {0x4000}, {0xB0},
+ {0x34},
+ {0x4000}, {0x1000}, {0xC0},
+ {0x00, 0x00, 0x00},
+ {0x00},
+ {0x00}
+ };
+ #endif /* CY_USE_TEST_DATA */
+
+#else
+ extern u8 g_appload_ray[];
+#endif
+
+#endif /* __CYTTSP_H__ */