USB: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index ea7bba6..857c531 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -244,13 +244,13 @@
static void keyspan_rx_throttle (struct usb_serial_port *port)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
}
static void keyspan_rx_unthrottle (struct usb_serial_port *port)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
}
@@ -258,7 +258,7 @@
{
struct keyspan_port_private *p_priv;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
p_priv = usb_get_serial_port_data(port);
@@ -280,7 +280,7 @@
unsigned int cflag;
struct tty_struct *tty = port->tty;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
p_priv = usb_get_serial_port_data(port);
d_details = p_priv->device_details;
@@ -377,7 +377,7 @@
}
dbg("%s - for port %d (%d chars), flip=%d",
- __FUNCTION__, port->number, count, p_priv->out_flip);
+ __func__, port->number, count, p_priv->out_flip);
for (left = count; left > 0; left -= todo) {
todo = left;
@@ -389,11 +389,11 @@
/* Check we have a valid urb/endpoint before we use it... */
if ((this_urb = p_priv->out_urbs[flip]) == NULL) {
/* no bulk out, so return 0 bytes written */
- dbg("%s - no output urb :(", __FUNCTION__);
+ dbg("%s - no output urb :(", __func__);
return count;
}
- dbg("%s - endpoint %d flip %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe), flip);
+ dbg("%s - endpoint %d flip %d", __func__, usb_pipeendpoint(this_urb->pipe), flip);
if (this_urb->status == -EINPROGRESS) {
if (time_before(jiffies, p_priv->tx_start_time[flip] + 10 * HZ))
@@ -435,13 +435,13 @@
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
endpoint = usb_pipeendpoint(urb->pipe);
if (status) {
dbg("%s - nonzero status: %x on endpoint %d.",
- __FUNCTION__, status, endpoint);
+ __func__, status, endpoint);
return;
}
@@ -459,7 +459,7 @@
}
} else {
/* some bytes had errors, every byte has status */
- dbg("%s - RX error!!!!", __FUNCTION__);
+ dbg("%s - RX error!!!!", __func__);
for (i = 0; i + 1 < urb->actual_length; i += 2) {
int stat = data[i], flag = 0;
if (stat & RXERROR_OVERRUN)
@@ -479,7 +479,7 @@
urb->dev = port->serial->dev;
if (port->open_count)
if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
return;
}
@@ -492,7 +492,7 @@
port = (struct usb_serial_port *) urb->context;
p_priv = usb_get_serial_port_data(port);
- dbg ("%s - urb %d", __FUNCTION__, urb == p_priv->out_urbs[1]);
+ dbg ("%s - urb %d", __func__, urb == p_priv->out_urbs[1]);
if (port->open_count)
usb_serial_port_softint(port);
@@ -500,7 +500,7 @@
static void usa26_inack_callback(struct urb *urb)
{
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
}
@@ -513,7 +513,7 @@
p_priv = usb_get_serial_port_data(port);
if (p_priv->resend_cont) {
- dbg ("%s - sending setup", __FUNCTION__);
+ dbg ("%s - sending setup", __func__);
keyspan_usa26_send_setup(port->serial, port, p_priv->resend_cont - 1);
}
}
@@ -531,11 +531,11 @@
serial = (struct usb_serial *) urb->context;
if (status) {
- dbg("%s - nonzero status: %x", __FUNCTION__, status);
+ dbg("%s - nonzero status: %x", __func__, status);
return;
}
if (urb->actual_length != 9) {
- dbg("%s - %d byte report??", __FUNCTION__, urb->actual_length);
+ dbg("%s - %d byte report??", __func__, urb->actual_length);
goto exit;
}
@@ -543,7 +543,7 @@
#if 0
dbg("%s - port status: port %d cts %d dcd %d dsr %d ri %d toff %d txoff %d rxen %d cr %d",
- __FUNCTION__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr, msg->ri, msg->_txOff,
+ __func__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr, msg->ri, msg->_txOff,
msg->_txXoff, msg->rxEnabled, msg->controlResponse);
#endif
@@ -552,7 +552,7 @@
/* Check port number from message and retrieve private data */
if (msg->port >= serial->num_ports) {
- dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->port);
+ dbg ("%s - Unexpected port number %d", __func__, msg->port);
goto exit;
}
port = serial->port[msg->port];
@@ -576,14 +576,14 @@
/* Resubmit urb so we continue receiving */
urb->dev = serial->dev;
if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
exit: ;
}
static void usa26_glocont_callback(struct urb *urb)
{
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
}
@@ -597,7 +597,7 @@
struct keyspan_port_private *p_priv;
int status = urb->status;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
port = (struct usb_serial_port *) urb->context;
p_priv = usb_get_serial_port_data(port);
@@ -609,7 +609,7 @@
do {
if (status) {
dbg("%s - nonzero status: %x on endpoint %d.",
- __FUNCTION__, status, usb_pipeendpoint(urb->pipe));
+ __func__, status, usb_pipeendpoint(urb->pipe));
return;
}
@@ -629,7 +629,7 @@
urb->dev = port->serial->dev;
if (port->open_count)
if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
p_priv->in_flip ^= 1;
@@ -639,7 +639,7 @@
static void usa28_inack_callback(struct urb *urb)
{
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
}
static void usa28_outcont_callback(struct urb *urb)
@@ -651,7 +651,7 @@
p_priv = usb_get_serial_port_data(port);
if (p_priv->resend_cont) {
- dbg ("%s - sending setup", __FUNCTION__);
+ dbg ("%s - sending setup", __func__);
keyspan_usa28_send_setup(port->serial, port, p_priv->resend_cont - 1);
}
}
@@ -670,16 +670,16 @@
serial = (struct usb_serial *) urb->context;
if (status) {
- dbg("%s - nonzero status: %x", __FUNCTION__, status);
+ dbg("%s - nonzero status: %x", __func__, status);
return;
}
if (urb->actual_length != sizeof(struct keyspan_usa28_portStatusMessage)) {
- dbg("%s - bad length %d", __FUNCTION__, urb->actual_length);
+ dbg("%s - bad length %d", __func__, urb->actual_length);
goto exit;
}
- /*dbg("%s %x %x %x %x %x %x %x %x %x %x %x %x", __FUNCTION__
+ /*dbg("%s %x %x %x %x %x %x %x %x %x %x %x %x", __func__
data[0], data[1], data[2], data[3], data[4], data[5],
data[6], data[7], data[8], data[9], data[10], data[11]);*/
@@ -689,7 +689,7 @@
/* Check port number from message and retrieve private data */
if (msg->port >= serial->num_ports) {
- dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->port);
+ dbg ("%s - Unexpected port number %d", __func__, msg->port);
goto exit;
}
port = serial->port[msg->port];
@@ -713,14 +713,14 @@
/* Resubmit urb so we continue receiving */
urb->dev = serial->dev;
if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
exit: ;
}
static void usa28_glocont_callback(struct urb *urb)
{
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
}
@@ -731,7 +731,7 @@
struct keyspan_port_private *p_priv;
int i;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
serial = (struct usb_serial *) urb->context;
for (i = 0; i < serial->num_ports; ++i) {
@@ -739,7 +739,7 @@
p_priv = usb_get_serial_port_data(port);
if (p_priv->resend_cont) {
- dbg ("%s - sending setup", __FUNCTION__);
+ dbg ("%s - sending setup", __func__);
keyspan_usa49_send_setup(serial, port, p_priv->resend_cont - 1);
break;
}
@@ -759,21 +759,21 @@
int old_dcd_state;
int status = urb->status;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
serial = (struct usb_serial *) urb->context;
if (status) {
- dbg("%s - nonzero status: %x", __FUNCTION__, status);
+ dbg("%s - nonzero status: %x", __func__, status);
return;
}
if (urb->actual_length != sizeof(struct keyspan_usa49_portStatusMessage)) {
- dbg("%s - bad length %d", __FUNCTION__, urb->actual_length);
+ dbg("%s - bad length %d", __func__, urb->actual_length);
goto exit;
}
- /*dbg(" %x %x %x %x %x %x %x %x %x %x %x", __FUNCTION__,
+ /*dbg(" %x %x %x %x %x %x %x %x %x %x %x", __func__,
data[0], data[1], data[2], data[3], data[4], data[5],
data[6], data[7], data[8], data[9], data[10]);*/
@@ -782,7 +782,7 @@
/* Check port number from message and retrieve private data */
if (msg->portNumber >= serial->num_ports) {
- dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->portNumber);
+ dbg ("%s - Unexpected port number %d", __func__, msg->portNumber);
goto exit;
}
port = serial->port[msg->portNumber];
@@ -807,14 +807,14 @@
urb->dev = serial->dev;
if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
exit: ;
}
static void usa49_inack_callback(struct urb *urb)
{
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
}
static void usa49_indat_callback(struct urb *urb)
@@ -826,12 +826,12 @@
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
endpoint = usb_pipeendpoint(urb->pipe);
if (status) {
- dbg("%s - nonzero status: %x on endpoint %d.", __FUNCTION__,
+ dbg("%s - nonzero status: %x on endpoint %d.", __func__,
status, endpoint);
return;
}
@@ -866,7 +866,7 @@
urb->dev = port->serial->dev;
if (port->open_count)
if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
}
@@ -879,12 +879,12 @@
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
serial = urb->context;
if (status) {
- dbg("%s - nonzero status: %x", __FUNCTION__, status);
+ dbg("%s - nonzero status: %x", __func__, status);
return;
}
@@ -898,7 +898,7 @@
/* Check port number from message*/
if (data[i] >= serial->num_ports) {
dbg ("%s - Unexpected port number %d",
- __FUNCTION__, data[i]);
+ __func__, data[i]);
return;
}
port = serial->port[data[i++]];
@@ -944,13 +944,13 @@
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
/* not used, usa-49 doesn't have per-port control endpoints */
static void usa49_outcont_callback(struct urb *urb)
{
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
}
static void usa90_indat_callback(struct urb *urb)
@@ -963,13 +963,13 @@
unsigned char *data = urb->transfer_buffer;
int status = urb->status;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
endpoint = usb_pipeendpoint(urb->pipe);
if (status) {
dbg("%s - nonzero status: %x on endpoint %d.",
- __FUNCTION__, status, endpoint);
+ __func__, status, endpoint);
return;
}
@@ -1000,7 +1000,7 @@
}
else {
/* some bytes had errors, every byte has status */
- dbg("%s - RX error!!!!", __FUNCTION__);
+ dbg("%s - RX error!!!!", __func__);
for (i = 0; i + 1 < urb->actual_length; i += 2) {
int stat = data[i], flag = 0;
if (stat & RXERROR_OVERRUN)
@@ -1021,7 +1021,7 @@
urb->dev = port->serial->dev;
if (port->open_count)
if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
return;
}
@@ -1040,11 +1040,11 @@
serial = (struct usb_serial *) urb->context;
if (status) {
- dbg("%s - nonzero status: %x", __FUNCTION__, status);
+ dbg("%s - nonzero status: %x", __func__, status);
return;
}
if (urb->actual_length < 14) {
- dbg("%s - %d byte report??", __FUNCTION__, urb->actual_length);
+ dbg("%s - %d byte report??", __func__, urb->actual_length);
goto exit;
}
@@ -1073,7 +1073,7 @@
/* Resubmit urb so we continue receiving */
urb->dev = serial->dev;
if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
exit:
;
@@ -1088,7 +1088,7 @@
p_priv = usb_get_serial_port_data(port);
if (p_priv->resend_cont) {
- dbg ("%s - sending setup", __FUNCTION__);
+ dbg ("%s - sending setup", __func__);
keyspan_usa90_send_setup(port->serial, port, p_priv->resend_cont - 1);
}
}
@@ -1105,17 +1105,17 @@
int old_dcd_state;
int status = urb->status;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
serial = urb->context;
if (status) {
- dbg("%s - nonzero status: %x", __FUNCTION__, status);
+ dbg("%s - nonzero status: %x", __func__, status);
return;
}
if (urb->actual_length != sizeof(struct keyspan_usa67_portStatusMessage)) {
- dbg("%s - bad length %d", __FUNCTION__, urb->actual_length);
+ dbg("%s - bad length %d", __func__, urb->actual_length);
return;
}
@@ -1125,7 +1125,7 @@
/* Check port number from message and retrieve private data */
if (msg->port >= serial->num_ports) {
- dbg ("%s - Unexpected port number %d", __FUNCTION__, msg->port);
+ dbg ("%s - Unexpected port number %d", __func__, msg->port);
return;
}
@@ -1149,7 +1149,7 @@
urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err != 0)
- dbg("%s - resubmit read urb failed. (%d)", __FUNCTION__, err);
+ dbg("%s - resubmit read urb failed. (%d)", __func__, err);
}
static void usa67_glocont_callback(struct urb *urb)
@@ -1159,7 +1159,7 @@
struct keyspan_port_private *p_priv;
int i;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
serial = urb->context;
for (i = 0; i < serial->num_ports; ++i) {
@@ -1167,7 +1167,7 @@
p_priv = usb_get_serial_port_data(port);
if (p_priv->resend_cont) {
- dbg ("%s - sending setup", __FUNCTION__);
+ dbg ("%s - sending setup", __func__);
keyspan_usa67_send_setup(serial, port,
p_priv->resend_cont - 1);
break;
@@ -1183,7 +1183,7 @@
int data_len;
struct urb *this_urb;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
p_priv = usb_get_serial_port_data(port);
d_details = p_priv->device_details;
@@ -1228,7 +1228,7 @@
p_priv = usb_get_serial_port_data(port);
d_details = p_priv->device_details;
- dbg("%s - port%d.", __FUNCTION__, port->number);
+ dbg("%s - port%d.", __func__, port->number);
/* Set some sane defaults */
p_priv->rts_state = 1;
@@ -1253,7 +1253,7 @@
usb_clear_halt(urb->dev, urb->pipe);
if ((err = usb_submit_urb(urb, GFP_KERNEL)) != 0) {
- dbg("%s - submit urb %d failed (%d)", __FUNCTION__, i, err);
+ dbg("%s - submit urb %d failed (%d)", __func__, i, err);
}
}
@@ -1305,7 +1305,7 @@
struct keyspan_serial_private *s_priv;
struct keyspan_port_private *p_priv;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
s_priv = usb_get_serial_data(serial);
p_priv = usb_get_serial_port_data(port);
@@ -1320,7 +1320,7 @@
}
/*while (p_priv->outcont_urb->status == -EINPROGRESS) {
- dbg("%s - urb in progress", __FUNCTION__);
+ dbg("%s - urb in progress", __func__);
}*/
p_priv->out_flip = 0;
@@ -1484,10 +1484,10 @@
if (endpoint == -1)
return NULL; /* endpoint not needed */
- dbg ("%s - alloc for endpoint %d.", __FUNCTION__, endpoint);
+ dbg ("%s - alloc for endpoint %d.", __func__, endpoint);
urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
if (urb == NULL) {
- dbg ("%s - alloc for endpoint %d failed.", __FUNCTION__, endpoint);
+ dbg ("%s - alloc for endpoint %d failed.", __func__, endpoint);
return NULL;
}
@@ -1588,7 +1588,7 @@
struct callbacks *cback;
int endp;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
s_priv = usb_get_serial_data(serial);
d_details = s_priv->device_details;
@@ -1662,7 +1662,7 @@
div, /* divisor */
cnt; /* inverse of divisor (programmed into 8051) */
- dbg ("%s - %d.", __FUNCTION__, baud_rate);
+ dbg ("%s - %d.", __func__, baud_rate);
/* prevent divide by zero... */
if( (b16 = (baud_rate * 16L)) == 0) {
@@ -1695,7 +1695,7 @@
*rate_hi = (u8) ((cnt >> 8) & 0xff);
}
if (rate_low && rate_hi) {
- dbg ("%s - %d %02x %02x.", __FUNCTION__, baud_rate, *rate_hi, *rate_low);
+ dbg ("%s - %d %02x %02x.", __func__, baud_rate, *rate_hi, *rate_low);
}
return (KEYSPAN_BAUD_RATE_OK);
@@ -1708,7 +1708,7 @@
u32 b16, /* baud rate times 16 (actual rate used internally) */
div; /* divisor */
- dbg ("%s - %d.", __FUNCTION__, baud_rate);
+ dbg ("%s - %d.", __func__, baud_rate);
/* prevent divide by zero... */
if( (b16 = (baud_rate * 16L)) == 0)
@@ -1731,7 +1731,7 @@
*rate_hi = (u8) ((div >> 8) & 0xff);
if (rate_low && rate_hi)
- dbg ("%s - %d %02x %02x.", __FUNCTION__, baud_rate, *rate_hi, *rate_low);
+ dbg ("%s - %d %02x %02x.", __func__, baud_rate, *rate_hi, *rate_low);
return (KEYSPAN_BAUD_RATE_OK);
}
@@ -1748,7 +1748,7 @@
u8 best_prescaler;
int i;
- dbg ("%s - %d.", __FUNCTION__, baud_rate);
+ dbg ("%s - %d.", __func__, baud_rate);
/* prevent divide by zero */
if( (b16 = baud_rate * 16L) == 0) {
@@ -1796,7 +1796,7 @@
}
if (prescaler) {
*prescaler = best_prescaler;
- /* dbg("%s - %d %d", __FUNCTION__, *prescaler, div); */
+ /* dbg("%s - %d %d", __func__, *prescaler, div); */
}
return (KEYSPAN_BAUD_RATE_OK);
}
@@ -1809,7 +1809,7 @@
div, /* divisor */
cnt; /* inverse of divisor (programmed into 8051) */
- dbg ("%s - %d.", __FUNCTION__, baud_rate);
+ dbg ("%s - %d.", __func__, baud_rate);
/* prevent divide by zero */
if ((b16 = baud_rate * 16L) == 0)
@@ -1848,7 +1848,7 @@
if (rate_hi) {
*rate_hi = (u8) ((cnt >> 8) & 0xff);
}
- dbg ("%s - %d OK.", __FUNCTION__, baud_rate);
+ dbg ("%s - %d OK.", __func__, baud_rate);
return (KEYSPAN_BAUD_RATE_OK);
}
@@ -1864,7 +1864,7 @@
struct urb *this_urb;
int device_port, err;
- dbg ("%s reset=%d", __FUNCTION__, reset_port);
+ dbg ("%s reset=%d", __func__, reset_port);
s_priv = usb_get_serial_data(serial);
p_priv = usb_get_serial_port_data(port);
@@ -1874,11 +1874,11 @@
outcont_urb = d_details->outcont_endpoints[port->number];
this_urb = p_priv->outcont_urb;
- dbg("%s - endpoint %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe));
+ dbg("%s - endpoint %d", __func__, usb_pipeendpoint(this_urb->pipe));
/* Make sure we have an urb then send the message */
if (this_urb == NULL) {
- dbg("%s - oops no urb.", __FUNCTION__);
+ dbg("%s - oops no urb.", __func__);
return -1;
}
@@ -1887,7 +1887,7 @@
if ((reset_port + 1) > p_priv->resend_cont)
p_priv->resend_cont = reset_port + 1;
if (this_urb->status == -EINPROGRESS) {
- /* dbg ("%s - already writing", __FUNCTION__); */
+ /* dbg ("%s - already writing", __func__); */
mdelay(5);
return(-1);
}
@@ -1901,7 +1901,7 @@
if (d_details->calculate_baud_rate
(p_priv->baud, d_details->baudclk, &msg.baudHi,
&msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) {
- dbg("%s - Invalid baud rate %d requested, using 9600.", __FUNCTION__,
+ dbg("%s - Invalid baud rate %d requested, using 9600.", __func__,
p_priv->baud);
msg.baudLo = 0;
msg.baudHi = 125; /* Values for 9600 baud */
@@ -1996,11 +1996,11 @@
this_urb->dev = serial->dev;
if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
- dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, err);
+ dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
}
#if 0
else {
- dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __FUNCTION__
+ dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__
outcont_urb, this_urb->transfer_buffer_length,
usb_pipeendpoint(this_urb->pipe));
}
@@ -2020,7 +2020,7 @@
struct urb *this_urb;
int device_port, err;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
s_priv = usb_get_serial_data(serial);
p_priv = usb_get_serial_port_data(port);
@@ -2029,7 +2029,7 @@
/* only do something if we have a bulk out endpoint */
if ((this_urb = p_priv->outcont_urb) == NULL) {
- dbg("%s - oops no urb.", __FUNCTION__);
+ dbg("%s - oops no urb.", __func__);
return -1;
}
@@ -2038,7 +2038,7 @@
if ((reset_port + 1) > p_priv->resend_cont)
p_priv->resend_cont = reset_port + 1;
if (this_urb->status == -EINPROGRESS) {
- dbg ("%s already writing", __FUNCTION__);
+ dbg ("%s already writing", __func__);
mdelay(5);
return(-1);
}
@@ -2048,7 +2048,7 @@
msg.setBaudRate = 1;
if (d_details->calculate_baud_rate(p_priv->baud, d_details->baudclk,
&msg.baudHi, &msg.baudLo, NULL, device_port) == KEYSPAN_INVALID_BAUD_RATE ) {
- dbg("%s - Invalid baud rate requested %d.", __FUNCTION__, p_priv->baud);
+ dbg("%s - Invalid baud rate requested %d.", __func__, p_priv->baud);
msg.baudLo = 0xff;
msg.baudHi = 0xb2; /* Values for 9600 baud */
}
@@ -2122,11 +2122,11 @@
this_urb->dev = serial->dev;
if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
- dbg("%s - usb_submit_urb(setup) failed", __FUNCTION__);
+ dbg("%s - usb_submit_urb(setup) failed", __func__);
}
#if 0
else {
- dbg("%s - usb_submit_urb(setup) OK %d bytes", __FUNCTION__,
+ dbg("%s - usb_submit_urb(setup) OK %d bytes", __func__,
this_urb->transfer_buffer_length);
}
#endif
@@ -2146,7 +2146,7 @@
struct urb *this_urb;
int err, device_port;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
s_priv = usb_get_serial_data(serial);
p_priv = usb_get_serial_port_data(port);
@@ -2157,11 +2157,11 @@
/* Work out which port within the device is being setup */
device_port = port->number - port->serial->minor;
- dbg("%s - endpoint %d port %d (%d)",__FUNCTION__, usb_pipeendpoint(this_urb->pipe), port->number, device_port);
+ dbg("%s - endpoint %d port %d (%d)",__func__, usb_pipeendpoint(this_urb->pipe), port->number, device_port);
/* Make sure we have an urb then send the message */
if (this_urb == NULL) {
- dbg("%s - oops no urb for port %d.", __FUNCTION__, port->number);
+ dbg("%s - oops no urb for port %d.", __func__, port->number);
return -1;
}
@@ -2171,7 +2171,7 @@
p_priv->resend_cont = reset_port + 1;
if (this_urb->status == -EINPROGRESS) {
- /* dbg ("%s - already writing", __FUNCTION__); */
+ /* dbg ("%s - already writing", __func__); */
mdelay(5);
return(-1);
}
@@ -2188,7 +2188,7 @@
if (d_details->calculate_baud_rate
(p_priv->baud, d_details->baudclk, &msg.baudHi,
&msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) {
- dbg("%s - Invalid baud rate %d requested, using 9600.", __FUNCTION__,
+ dbg("%s - Invalid baud rate %d requested, using 9600.", __func__,
p_priv->baud);
msg.baudLo = 0;
msg.baudHi = 125; /* Values for 9600 baud */
@@ -2307,11 +2307,11 @@
this_urb->dev = serial->dev;
}
if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
- dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, err);
+ dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
}
#if 0
else {
- dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __FUNCTION__,
+ dbg("%s - usb_submit_urb(%d) OK %d bytes (end %d)", __func__,
outcont_urb, this_urb->transfer_buffer_length,
usb_pipeendpoint(this_urb->pipe));
}
@@ -2332,7 +2332,7 @@
int err;
u8 prescaler;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
s_priv = usb_get_serial_data(serial);
p_priv = usb_get_serial_port_data(port);
@@ -2340,7 +2340,7 @@
/* only do something if we have a bulk out endpoint */
if ((this_urb = p_priv->outcont_urb) == NULL) {
- dbg("%s - oops no urb.", __FUNCTION__);
+ dbg("%s - oops no urb.", __func__);
return -1;
}
@@ -2349,7 +2349,7 @@
if ((reset_port + 1) > p_priv->resend_cont)
p_priv->resend_cont = reset_port + 1;
if (this_urb->status == -EINPROGRESS) {
- dbg ("%s already writing", __FUNCTION__);
+ dbg ("%s already writing", __func__);
mdelay(5);
return(-1);
}
@@ -2363,7 +2363,7 @@
if (d_details->calculate_baud_rate
(p_priv->baud, d_details->baudclk, &msg.baudHi,
&msg.baudLo, &prescaler, 0) == KEYSPAN_INVALID_BAUD_RATE ) {
- dbg("%s - Invalid baud rate %d requested, using 9600.", __FUNCTION__,
+ dbg("%s - Invalid baud rate %d requested, using 9600.", __func__,
p_priv->baud);
p_priv->baud = 9600;
d_details->calculate_baud_rate (p_priv->baud, d_details->baudclk,
@@ -2453,7 +2453,7 @@
this_urb->dev = serial->dev;
if ((err = usb_submit_urb(this_urb, GFP_ATOMIC)) != 0) {
- dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__, err);
+ dbg("%s - usb_submit_urb(setup) failed (%d)", __func__, err);
}
return (0);
}
@@ -2469,7 +2469,7 @@
struct urb *this_urb;
int err, device_port;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
s_priv = usb_get_serial_data(serial);
p_priv = usb_get_serial_port_data(port);
@@ -2482,7 +2482,7 @@
/* Make sure we have an urb then send the message */
if (this_urb == NULL) {
- dbg("%s - oops no urb for port %d.", __FUNCTION__,
+ dbg("%s - oops no urb for port %d.", __func__,
port->number);
return -1;
}
@@ -2492,7 +2492,7 @@
if ((reset_port + 1) > p_priv->resend_cont)
p_priv->resend_cont = reset_port + 1;
if (this_urb->status == -EINPROGRESS) {
- /* dbg ("%s - already writing", __FUNCTION__); */
+ /* dbg ("%s - already writing", __func__); */
mdelay(5);
return(-1);
}
@@ -2508,7 +2508,7 @@
if (d_details->calculate_baud_rate
(p_priv->baud, d_details->baudclk, &msg.baudHi,
&msg.baudLo, &msg.prescaler, device_port) == KEYSPAN_INVALID_BAUD_RATE ) {
- dbg("%s - Invalid baud rate %d requested, using 9600.", __FUNCTION__,
+ dbg("%s - Invalid baud rate %d requested, using 9600.", __func__,
p_priv->baud);
msg.baudLo = 0;
msg.baudHi = 125; /* Values for 9600 baud */
@@ -2601,7 +2601,7 @@
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err != 0)
- dbg("%s - usb_submit_urb(setup) failed (%d)", __FUNCTION__,
+ dbg("%s - usb_submit_urb(setup) failed (%d)", __func__,
err);
return (0);
}
@@ -2612,7 +2612,7 @@
struct keyspan_serial_private *s_priv;
const struct keyspan_device_details *d_details;
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
s_priv = usb_get_serial_data(serial);
d_details = s_priv->device_details;
@@ -2647,20 +2647,20 @@
struct keyspan_port_private *p_priv;
const struct keyspan_device_details *d_details;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
for (i = 0; (d_details = keyspan_devices[i]) != NULL; ++i)
if (d_details->product_id == le16_to_cpu(serial->dev->descriptor.idProduct))
break;
if (d_details == NULL) {
- dev_err(&serial->dev->dev, "%s - unknown product id %x\n", __FUNCTION__, le16_to_cpu(serial->dev->descriptor.idProduct));
+ dev_err(&serial->dev->dev, "%s - unknown product id %x\n", __func__, le16_to_cpu(serial->dev->descriptor.idProduct));
return 1;
}
/* Setup private data for serial driver */
s_priv = kzalloc(sizeof(struct keyspan_serial_private), GFP_KERNEL);
if (!s_priv) {
- dbg("%s - kmalloc for keyspan_serial_private failed.", __FUNCTION__);
+ dbg("%s - kmalloc for keyspan_serial_private failed.", __func__);
return -ENOMEM;
}
@@ -2672,7 +2672,7 @@
port = serial->port[i];
p_priv = kzalloc(sizeof(struct keyspan_port_private), GFP_KERNEL);
if (!p_priv) {
- dbg("%s - kmalloc for keyspan_port_private (%d) failed!.", __FUNCTION__, i);
+ dbg("%s - kmalloc for keyspan_port_private (%d) failed!.", __func__, i);
return (1);
}
p_priv->device_details = d_details;
@@ -2685,14 +2685,14 @@
s_priv->instat_urb->dev = serial->dev;
err = usb_submit_urb(s_priv->instat_urb, GFP_KERNEL);
if (err != 0)
- dbg("%s - submit instat urb failed %d", __FUNCTION__,
+ dbg("%s - submit instat urb failed %d", __func__,
err);
}
if (s_priv->indat_urb != NULL) {
s_priv->indat_urb->dev = serial->dev;
err = usb_submit_urb(s_priv->indat_urb, GFP_KERNEL);
if (err != 0)
- dbg("%s - submit indat urb failed %d", __FUNCTION__,
+ dbg("%s - submit indat urb failed %d", __func__,
err);
}
@@ -2706,7 +2706,7 @@
struct keyspan_serial_private *s_priv;
struct keyspan_port_private *p_priv;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
s_priv = usb_get_serial_data(serial);