ARM: mxs: Use a proper timeout mechanism
Introduce a function for checking the busy bits of CLKCTRL register that
uses a proper timeout mechanism.
Remove parts of code that use busy loops and replace them with the
mxs_clkctrl_timeout() function.
Tested on a mx28evk by performing audio playback.
Suggested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 54d82a4..22ad12f 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -322,7 +322,6 @@
{ \
u32 reg, bm_busy, div_max, d, f, div, frac; \
unsigned long diff, parent_rate, calc_rate; \
- int i; \
\
div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \
bm_busy = BM_CLKCTRL_##dr##_BUSY; \
@@ -396,16 +395,7 @@
} \
__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \
\
- for (i = 10000; i; i--) \
- if (!(__raw_readl(CLKCTRL_BASE_ADDR + \
- HW_CLKCTRL_##dr) & bm_busy)) \
- break; \
- if (!i) { \
- pr_err("%s: divider writing timeout\n", __func__); \
- return -ETIMEDOUT; \
- } \
- \
- return 0; \
+ return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, bm_busy); \
}
_CLK_SET_RATE(cpu_clk, CPU, FRAC0, CPU)
@@ -421,7 +411,6 @@
{ \
u32 reg, div_max, div; \
unsigned long parent_rate; \
- int i; \
\
parent_rate = clk_get_rate(clk->parent); \
div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV; \
@@ -439,16 +428,7 @@
} \
__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr); \
\
- for (i = 10000; i; i--) \
- if (!(__raw_readl(CLKCTRL_BASE_ADDR + \
- HW_CLKCTRL_##dr) & BM_CLKCTRL_##dr##_BUSY)) \
- break; \
- if (!i) { \
- pr_err("%s: divider writing timeout\n", __func__); \
- return -ETIMEDOUT; \
- } \
- \
- return 0; \
+ return mxs_clkctrl_timeout(HW_CLKCTRL_##dr, BM_CLKCTRL_##dr##_BUSY);\
}
_CLK_SET_RATE1(xbus_clk, XBUS)
@@ -461,7 +441,6 @@
u32 reg; \
u64 lrate; \
unsigned long parent_rate; \
- int i; \
\
parent_rate = clk_get_rate(clk->parent); \
if (rate > parent_rate) \
@@ -483,16 +462,7 @@
} \
__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \
\
- for (i = 10000; i; i--) \
- if (!(__raw_readl(CLKCTRL_BASE_ADDR + \
- HW_CLKCTRL_##rs) & BM_CLKCTRL_##rs##_BUSY)) \
- break; \
- if (!i) { \
- pr_err("%s: divider writing timeout\n", __func__); \
- return -ETIMEDOUT; \
- } \
- \
- return 0; \
+ return mxs_clkctrl_timeout(HW_CLKCTRL_##rs, BM_CLKCTRL_##rs##_BUSY);\
}
_CLK_SET_RATE_SAIF(saif0_clk, SAIF0)
@@ -682,7 +652,7 @@
static int clk_misc_init(void)
{
u32 reg;
- int i;
+ int ret;
/* Fix up parent per register setting */
reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ);
@@ -762,14 +732,7 @@
reg |= 3 << BP_CLKCTRL_HBUS_DIV;
__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
- for (i = 10000; i; i--)
- if (!(__raw_readl(CLKCTRL_BASE_ADDR +
- HW_CLKCTRL_HBUS) & BM_CLKCTRL_HBUS_ASM_BUSY))
- break;
- if (!i) {
- pr_err("%s: divider writing timeout\n", __func__);
- return -ETIMEDOUT;
- }
+ ret = mxs_clkctrl_timeout(HW_CLKCTRL_HBUS, BM_CLKCTRL_HBUS_ASM_BUSY);
/* Gate off cpu clock in WFI for power saving */
__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
@@ -796,7 +759,7 @@
reg |= 30 << BP_CLKCTRL_FRAC0_IO0FRAC;
__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC0);
- return 0;
+ return ret;
}
int __init mx28_clocks_init(void)