PCI: Change all drivers to use pci_device->revision
Instead of all drivers reading pci config space to get the revision
ID, they can now use the pci_device->revision member.
This exposes some issues where drivers where reading a word or a dword
for the revision number, and adding useless error-handling around the
read. Some drivers even just read it for no purpose of all.
In devices where the revision ID is being copied over and used in what
appears to be the equivalent of hotpath, I have left the copy code
and the cached copy as not to influence the driver's performance.
Compile tested with make all{yes,mod}config on x86_64 and i386.
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index 27852b4..1c0d757 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -223,13 +223,8 @@
{
int err, i;
- err = pci_read_config_byte(asd_ha->pcidev, PCI_REVISION_ID,
- &asd_ha->revision_id);
- if (err) {
- asd_printk("couldn't read REVISION ID register of %s\n",
- pci_name(asd_ha->pcidev));
- goto Err;
- }
+ asd_ha->revision_id = asd_ha->pcidev->revision;
+
err = -ENODEV;
if (asd_ha->revision_id < AIC9410_DEV_REV_B0) {
asd_printk("%s is revision %s (%X), which is not supported\n",
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index fa6ff29..8133071 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -5367,18 +5367,12 @@
**/
static int ipr_invalid_adapter(struct ipr_ioa_cfg *ioa_cfg)
{
- u8 rev_id;
int i;
- if (ioa_cfg->type == 0x5702) {
- if (pci_read_config_byte(ioa_cfg->pdev, PCI_REVISION_ID,
- &rev_id) == PCIBIOS_SUCCESSFUL) {
- if (rev_id < 4) {
- for (i = 0; i < ARRAY_SIZE(ipr_blocked_processors); i++){
- if (__is_processor(ipr_blocked_processors[i]))
- return 1;
- }
- }
+ if ((ioa_cfg->type == 0x5702) && (ioa_cfg->pdev->revision < 4)) {
+ for (i = 0; i < ARRAY_SIZE(ipr_blocked_processors); i++){
+ if (__is_processor(ipr_blocked_processors[i]))
+ return 1;
}
}
return 0;
@@ -7535,13 +7529,7 @@
else
ioa_cfg->transop_timeout = IPR_OPERATIONAL_TIMEOUT;
- rc = pci_read_config_byte(pdev, PCI_REVISION_ID, &ioa_cfg->revid);
-
- if (rc != PCIBIOS_SUCCESSFUL) {
- dev_err(&pdev->dev, "Failed to read PCI revision ID\n");
- rc = -EIO;
- goto out_scsi_host_put;
- }
+ ioa_cfg->revid = pdev->revision;
ipr_regs_pci = pci_resource_start(pdev, 0);
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 8b704f7..40f148e 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -7148,7 +7148,6 @@
uint32_t mem_addr;
uint32_t io_len;
uint32_t mem_len;
- uint8_t revision_id;
uint8_t bus;
uint8_t func;
uint8_t irq;
@@ -7227,12 +7226,6 @@
}
}
- /* get the revision ID */
- if (pci_read_config_byte(pci_dev, PCI_REVISION_ID, &revision_id)) {
- IPS_PRINTK(KERN_WARNING, pci_dev, "Can't get revision id.\n");
- return -1;
- }
-
subdevice_id = pci_dev->subsystem_device;
/* found a controller */
@@ -7258,7 +7251,7 @@
ha->mem_ptr = mem_ptr;
ha->ioremap_ptr = ioremap_ptr;
ha->host_num = (uint32_t) index;
- ha->revision_id = revision_id;
+ ha->revision_id = pci_dev->revision;
ha->slot_num = PCI_SLOT(pci_dev->devfn);
ha->device_id = pci_dev->device;
ha->subdevice_id = subdevice_id;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 2a45aec..cf94f86 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -296,7 +296,7 @@
d &= ~PCI_ROM_ADDRESS_ENABLE;
pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
- pci_read_config_word(ha->pdev, PCI_REVISION_ID, &ha->chip_revision);
+ ha->chip_revision = ha->pdev->revision;
/* Get PCI bus information. */
spin_lock_irqsave(&ha->hardware_lock, flags);