|  | /* | 
|  | *  linux/fs/ext4/inode.c | 
|  | * | 
|  | * Copyright (C) 1992, 1993, 1994, 1995 | 
|  | * Remy Card (card@masi.ibp.fr) | 
|  | * Laboratoire MASI - Institut Blaise Pascal | 
|  | * Universite Pierre et Marie Curie (Paris VI) | 
|  | * | 
|  | *  from | 
|  | * | 
|  | *  linux/fs/minix/inode.c | 
|  | * | 
|  | *  Copyright (C) 1991, 1992  Linus Torvalds | 
|  | * | 
|  | *  Goal-directed block allocation by Stephen Tweedie | 
|  | *	(sct@redhat.com), 1993, 1998 | 
|  | *  Big-endian to little-endian byte-swapping/bitmaps by | 
|  | *        David S. Miller (davem@caip.rutgers.edu), 1995 | 
|  | *  64-bit file support on 64-bit platforms by Jakub Jelinek | 
|  | *	(jj@sunsite.ms.mff.cuni.cz) | 
|  | * | 
|  | *  Assorted race fixes, rewrite of ext4_get_block() by Al Viro, 2000 | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/time.h> | 
|  | #include <linux/jbd2.h> | 
|  | #include <linux/highuid.h> | 
|  | #include <linux/pagemap.h> | 
|  | #include <linux/quotaops.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/buffer_head.h> | 
|  | #include <linux/writeback.h> | 
|  | #include <linux/pagevec.h> | 
|  | #include <linux/mpage.h> | 
|  | #include <linux/namei.h> | 
|  | #include <linux/uio.h> | 
|  | #include <linux/bio.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/kernel.h> | 
|  |  | 
|  | #include "ext4_jbd2.h" | 
|  | #include "xattr.h" | 
|  | #include "acl.h" | 
|  | #include "ext4_extents.h" | 
|  |  | 
|  | #include <trace/events/ext4.h> | 
|  |  | 
|  | #define MPAGE_DA_EXTENT_TAIL 0x01 | 
|  |  | 
|  | static inline int ext4_begin_ordered_truncate(struct inode *inode, | 
|  | loff_t new_size) | 
|  | { | 
|  | return jbd2_journal_begin_ordered_truncate( | 
|  | EXT4_SB(inode->i_sb)->s_journal, | 
|  | &EXT4_I(inode)->jinode, | 
|  | new_size); | 
|  | } | 
|  |  | 
|  | static void ext4_invalidatepage(struct page *page, unsigned long offset); | 
|  |  | 
|  | /* | 
|  | * Test whether an inode is a fast symlink. | 
|  | */ | 
|  | static int ext4_inode_is_fast_symlink(struct inode *inode) | 
|  | { | 
|  | int ea_blocks = EXT4_I(inode)->i_file_acl ? | 
|  | (inode->i_sb->s_blocksize >> 9) : 0; | 
|  |  | 
|  | return (S_ISLNK(inode->i_mode) && inode->i_blocks - ea_blocks == 0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Work out how many blocks we need to proceed with the next chunk of a | 
|  | * truncate transaction. | 
|  | */ | 
|  | static unsigned long blocks_for_truncate(struct inode *inode) | 
|  | { | 
|  | ext4_lblk_t needed; | 
|  |  | 
|  | needed = inode->i_blocks >> (inode->i_sb->s_blocksize_bits - 9); | 
|  |  | 
|  | /* Give ourselves just enough room to cope with inodes in which | 
|  | * i_blocks is corrupt: we've seen disk corruptions in the past | 
|  | * which resulted in random data in an inode which looked enough | 
|  | * like a regular file for ext4 to try to delete it.  Things | 
|  | * will go a bit crazy if that happens, but at least we should | 
|  | * try not to panic the whole kernel. */ | 
|  | if (needed < 2) | 
|  | needed = 2; | 
|  |  | 
|  | /* But we need to bound the transaction so we don't overflow the | 
|  | * journal. */ | 
|  | if (needed > EXT4_MAX_TRANS_DATA) | 
|  | needed = EXT4_MAX_TRANS_DATA; | 
|  |  | 
|  | return EXT4_DATA_TRANS_BLOCKS(inode->i_sb) + needed; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Truncate transactions can be complex and absolutely huge.  So we need to | 
|  | * be able to restart the transaction at a conventient checkpoint to make | 
|  | * sure we don't overflow the journal. | 
|  | * | 
|  | * start_transaction gets us a new handle for a truncate transaction, | 
|  | * and extend_transaction tries to extend the existing one a bit.  If | 
|  | * extend fails, we need to propagate the failure up and restart the | 
|  | * transaction in the top-level truncate loop. --sct | 
|  | */ | 
|  | static handle_t *start_transaction(struct inode *inode) | 
|  | { | 
|  | handle_t *result; | 
|  |  | 
|  | result = ext4_journal_start(inode, blocks_for_truncate(inode)); | 
|  | if (!IS_ERR(result)) | 
|  | return result; | 
|  |  | 
|  | ext4_std_error(inode->i_sb, PTR_ERR(result)); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Try to extend this transaction for the purposes of truncation. | 
|  | * | 
|  | * Returns 0 if we managed to create more room.  If we can't create more | 
|  | * room, and the transaction must be restarted we return 1. | 
|  | */ | 
|  | static int try_to_extend_transaction(handle_t *handle, struct inode *inode) | 
|  | { | 
|  | if (!ext4_handle_valid(handle)) | 
|  | return 0; | 
|  | if (ext4_handle_has_enough_credits(handle, EXT4_RESERVE_TRANS_BLOCKS+1)) | 
|  | return 0; | 
|  | if (!ext4_journal_extend(handle, blocks_for_truncate(inode))) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Restart the transaction associated with *handle.  This does a commit, | 
|  | * so before we call here everything must be consistently dirtied against | 
|  | * this transaction. | 
|  | */ | 
|  | int ext4_truncate_restart_trans(handle_t *handle, struct inode *inode, | 
|  | int nblocks) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | /* | 
|  | * Drop i_data_sem to avoid deadlock with ext4_get_blocks At this | 
|  | * moment, get_block can be called only for blocks inside i_size since | 
|  | * page cache has been already dropped and writes are blocked by | 
|  | * i_mutex. So we can safely drop the i_data_sem here. | 
|  | */ | 
|  | BUG_ON(EXT4_JOURNAL(inode) == NULL); | 
|  | jbd_debug(2, "restarting handle %p\n", handle); | 
|  | up_write(&EXT4_I(inode)->i_data_sem); | 
|  | ret = ext4_journal_restart(handle, blocks_for_truncate(inode)); | 
|  | down_write(&EXT4_I(inode)->i_data_sem); | 
|  | ext4_discard_preallocations(inode); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Called at the last iput() if i_nlink is zero. | 
|  | */ | 
|  | void ext4_delete_inode(struct inode *inode) | 
|  | { | 
|  | handle_t *handle; | 
|  | int err; | 
|  |  | 
|  | if (!is_bad_inode(inode)) | 
|  | dquot_initialize(inode); | 
|  |  | 
|  | if (ext4_should_order_data(inode)) | 
|  | ext4_begin_ordered_truncate(inode, 0); | 
|  | truncate_inode_pages(&inode->i_data, 0); | 
|  |  | 
|  | if (is_bad_inode(inode)) | 
|  | goto no_delete; | 
|  |  | 
|  | handle = ext4_journal_start(inode, blocks_for_truncate(inode)+3); | 
|  | if (IS_ERR(handle)) { | 
|  | ext4_std_error(inode->i_sb, PTR_ERR(handle)); | 
|  | /* | 
|  | * If we're going to skip the normal cleanup, we still need to | 
|  | * make sure that the in-core orphan linked list is properly | 
|  | * cleaned up. | 
|  | */ | 
|  | ext4_orphan_del(NULL, inode); | 
|  | goto no_delete; | 
|  | } | 
|  |  | 
|  | if (IS_SYNC(inode)) | 
|  | ext4_handle_sync(handle); | 
|  | inode->i_size = 0; | 
|  | err = ext4_mark_inode_dirty(handle, inode); | 
|  | if (err) { | 
|  | ext4_warning(inode->i_sb, | 
|  | "couldn't mark inode dirty (err %d)", err); | 
|  | goto stop_handle; | 
|  | } | 
|  | if (inode->i_blocks) | 
|  | ext4_truncate(inode); | 
|  |  | 
|  | /* | 
|  | * ext4_ext_truncate() doesn't reserve any slop when it | 
|  | * restarts journal transactions; therefore there may not be | 
|  | * enough credits left in the handle to remove the inode from | 
|  | * the orphan list and set the dtime field. | 
|  | */ | 
|  | if (!ext4_handle_has_enough_credits(handle, 3)) { | 
|  | err = ext4_journal_extend(handle, 3); | 
|  | if (err > 0) | 
|  | err = ext4_journal_restart(handle, 3); | 
|  | if (err != 0) { | 
|  | ext4_warning(inode->i_sb, | 
|  | "couldn't extend journal (err %d)", err); | 
|  | stop_handle: | 
|  | ext4_journal_stop(handle); | 
|  | goto no_delete; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Kill off the orphan record which ext4_truncate created. | 
|  | * AKPM: I think this can be inside the above `if'. | 
|  | * Note that ext4_orphan_del() has to be able to cope with the | 
|  | * deletion of a non-existent orphan - this is because we don't | 
|  | * know if ext4_truncate() actually created an orphan record. | 
|  | * (Well, we could do this if we need to, but heck - it works) | 
|  | */ | 
|  | ext4_orphan_del(handle, inode); | 
|  | EXT4_I(inode)->i_dtime	= get_seconds(); | 
|  |  | 
|  | /* | 
|  | * One subtle ordering requirement: if anything has gone wrong | 
|  | * (transaction abort, IO errors, whatever), then we can still | 
|  | * do these next steps (the fs will already have been marked as | 
|  | * having errors), but we can't free the inode if the mark_dirty | 
|  | * fails. | 
|  | */ | 
|  | if (ext4_mark_inode_dirty(handle, inode)) | 
|  | /* If that failed, just do the required in-core inode clear. */ | 
|  | clear_inode(inode); | 
|  | else | 
|  | ext4_free_inode(handle, inode); | 
|  | ext4_journal_stop(handle); | 
|  | return; | 
|  | no_delete: | 
|  | clear_inode(inode);	/* We must guarantee clearing of inode... */ | 
|  | } | 
|  |  | 
|  | typedef struct { | 
|  | __le32	*p; | 
|  | __le32	key; | 
|  | struct buffer_head *bh; | 
|  | } Indirect; | 
|  |  | 
|  | static inline void add_chain(Indirect *p, struct buffer_head *bh, __le32 *v) | 
|  | { | 
|  | p->key = *(p->p = v); | 
|  | p->bh = bh; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ext4_block_to_path - parse the block number into array of offsets | 
|  | *	@inode: inode in question (we are only interested in its superblock) | 
|  | *	@i_block: block number to be parsed | 
|  | *	@offsets: array to store the offsets in | 
|  | *	@boundary: set this non-zero if the referred-to block is likely to be | 
|  | *	       followed (on disk) by an indirect block. | 
|  | * | 
|  | *	To store the locations of file's data ext4 uses a data structure common | 
|  | *	for UNIX filesystems - tree of pointers anchored in the inode, with | 
|  | *	data blocks at leaves and indirect blocks in intermediate nodes. | 
|  | *	This function translates the block number into path in that tree - | 
|  | *	return value is the path length and @offsets[n] is the offset of | 
|  | *	pointer to (n+1)th node in the nth one. If @block is out of range | 
|  | *	(negative or too large) warning is printed and zero returned. | 
|  | * | 
|  | *	Note: function doesn't find node addresses, so no IO is needed. All | 
|  | *	we need to know is the capacity of indirect blocks (taken from the | 
|  | *	inode->i_sb). | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Portability note: the last comparison (check that we fit into triple | 
|  | * indirect block) is spelled differently, because otherwise on an | 
|  | * architecture with 32-bit longs and 8Kb pages we might get into trouble | 
|  | * if our filesystem had 8Kb blocks. We might use long long, but that would | 
|  | * kill us on x86. Oh, well, at least the sign propagation does not matter - | 
|  | * i_block would have to be negative in the very beginning, so we would not | 
|  | * get there at all. | 
|  | */ | 
|  |  | 
|  | static int ext4_block_to_path(struct inode *inode, | 
|  | ext4_lblk_t i_block, | 
|  | ext4_lblk_t offsets[4], int *boundary) | 
|  | { | 
|  | int ptrs = EXT4_ADDR_PER_BLOCK(inode->i_sb); | 
|  | int ptrs_bits = EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb); | 
|  | const long direct_blocks = EXT4_NDIR_BLOCKS, | 
|  | indirect_blocks = ptrs, | 
|  | double_blocks = (1 << (ptrs_bits * 2)); | 
|  | int n = 0; | 
|  | int final = 0; | 
|  |  | 
|  | if (i_block < direct_blocks) { | 
|  | offsets[n++] = i_block; | 
|  | final = direct_blocks; | 
|  | } else if ((i_block -= direct_blocks) < indirect_blocks) { | 
|  | offsets[n++] = EXT4_IND_BLOCK; | 
|  | offsets[n++] = i_block; | 
|  | final = ptrs; | 
|  | } else if ((i_block -= indirect_blocks) < double_blocks) { | 
|  | offsets[n++] = EXT4_DIND_BLOCK; | 
|  | offsets[n++] = i_block >> ptrs_bits; | 
|  | offsets[n++] = i_block & (ptrs - 1); | 
|  | final = ptrs; | 
|  | } else if (((i_block -= double_blocks) >> (ptrs_bits * 2)) < ptrs) { | 
|  | offsets[n++] = EXT4_TIND_BLOCK; | 
|  | offsets[n++] = i_block >> (ptrs_bits * 2); | 
|  | offsets[n++] = (i_block >> ptrs_bits) & (ptrs - 1); | 
|  | offsets[n++] = i_block & (ptrs - 1); | 
|  | final = ptrs; | 
|  | } else { | 
|  | ext4_warning(inode->i_sb, "block %lu > max in inode %lu", | 
|  | i_block + direct_blocks + | 
|  | indirect_blocks + double_blocks, inode->i_ino); | 
|  | } | 
|  | if (boundary) | 
|  | *boundary = final - 1 - (i_block & (ptrs - 1)); | 
|  | return n; | 
|  | } | 
|  |  | 
|  | static int __ext4_check_blockref(const char *function, struct inode *inode, | 
|  | __le32 *p, unsigned int max) | 
|  | { | 
|  | __le32 *bref = p; | 
|  | unsigned int blk; | 
|  |  | 
|  | while (bref < p+max) { | 
|  | blk = le32_to_cpu(*bref++); | 
|  | if (blk && | 
|  | unlikely(!ext4_data_block_valid(EXT4_SB(inode->i_sb), | 
|  | blk, 1))) { | 
|  | __ext4_error(inode->i_sb, function, | 
|  | "invalid block reference %u " | 
|  | "in inode #%lu", blk, inode->i_ino); | 
|  | return -EIO; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | #define ext4_check_indirect_blockref(inode, bh)                         \ | 
|  | __ext4_check_blockref(__func__, inode, (__le32 *)(bh)->b_data,  \ | 
|  | EXT4_ADDR_PER_BLOCK((inode)->i_sb)) | 
|  |  | 
|  | #define ext4_check_inode_blockref(inode)                                \ | 
|  | __ext4_check_blockref(__func__, inode, EXT4_I(inode)->i_data,   \ | 
|  | EXT4_NDIR_BLOCKS) | 
|  |  | 
|  | /** | 
|  | *	ext4_get_branch - read the chain of indirect blocks leading to data | 
|  | *	@inode: inode in question | 
|  | *	@depth: depth of the chain (1 - direct pointer, etc.) | 
|  | *	@offsets: offsets of pointers in inode/indirect blocks | 
|  | *	@chain: place to store the result | 
|  | *	@err: here we store the error value | 
|  | * | 
|  | *	Function fills the array of triples <key, p, bh> and returns %NULL | 
|  | *	if everything went OK or the pointer to the last filled triple | 
|  | *	(incomplete one) otherwise. Upon the return chain[i].key contains | 
|  | *	the number of (i+1)-th block in the chain (as it is stored in memory, | 
|  | *	i.e. little-endian 32-bit), chain[i].p contains the address of that | 
|  | *	number (it points into struct inode for i==0 and into the bh->b_data | 
|  | *	for i>0) and chain[i].bh points to the buffer_head of i-th indirect | 
|  | *	block for i>0 and NULL for i==0. In other words, it holds the block | 
|  | *	numbers of the chain, addresses they were taken from (and where we can | 
|  | *	verify that chain did not change) and buffer_heads hosting these | 
|  | *	numbers. | 
|  | * | 
|  | *	Function stops when it stumbles upon zero pointer (absent block) | 
|  | *		(pointer to last triple returned, *@err == 0) | 
|  | *	or when it gets an IO error reading an indirect block | 
|  | *		(ditto, *@err == -EIO) | 
|  | *	or when it reads all @depth-1 indirect blocks successfully and finds | 
|  | *	the whole chain, all way to the data (returns %NULL, *err == 0). | 
|  | * | 
|  | *      Need to be called with | 
|  | *      down_read(&EXT4_I(inode)->i_data_sem) | 
|  | */ | 
|  | static Indirect *ext4_get_branch(struct inode *inode, int depth, | 
|  | ext4_lblk_t  *offsets, | 
|  | Indirect chain[4], int *err) | 
|  | { | 
|  | struct super_block *sb = inode->i_sb; | 
|  | Indirect *p = chain; | 
|  | struct buffer_head *bh; | 
|  |  | 
|  | *err = 0; | 
|  | /* i_data is not going away, no lock needed */ | 
|  | add_chain(chain, NULL, EXT4_I(inode)->i_data + *offsets); | 
|  | if (!p->key) | 
|  | goto no_block; | 
|  | while (--depth) { | 
|  | bh = sb_getblk(sb, le32_to_cpu(p->key)); | 
|  | if (unlikely(!bh)) | 
|  | goto failure; | 
|  |  | 
|  | if (!bh_uptodate_or_lock(bh)) { | 
|  | if (bh_submit_read(bh) < 0) { | 
|  | put_bh(bh); | 
|  | goto failure; | 
|  | } | 
|  | /* validate block references */ | 
|  | if (ext4_check_indirect_blockref(inode, bh)) { | 
|  | put_bh(bh); | 
|  | goto failure; | 
|  | } | 
|  | } | 
|  |  | 
|  | add_chain(++p, bh, (__le32 *)bh->b_data + *++offsets); | 
|  | /* Reader: end */ | 
|  | if (!p->key) | 
|  | goto no_block; | 
|  | } | 
|  | return NULL; | 
|  |  | 
|  | failure: | 
|  | *err = -EIO; | 
|  | no_block: | 
|  | return p; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ext4_find_near - find a place for allocation with sufficient locality | 
|  | *	@inode: owner | 
|  | *	@ind: descriptor of indirect block. | 
|  | * | 
|  | *	This function returns the preferred place for block allocation. | 
|  | *	It is used when heuristic for sequential allocation fails. | 
|  | *	Rules are: | 
|  | *	  + if there is a block to the left of our position - allocate near it. | 
|  | *	  + if pointer will live in indirect block - allocate near that block. | 
|  | *	  + if pointer will live in inode - allocate in the same | 
|  | *	    cylinder group. | 
|  | * | 
|  | * In the latter case we colour the starting block by the callers PID to | 
|  | * prevent it from clashing with concurrent allocations for a different inode | 
|  | * in the same block group.   The PID is used here so that functionally related | 
|  | * files will be close-by on-disk. | 
|  | * | 
|  | *	Caller must make sure that @ind is valid and will stay that way. | 
|  | */ | 
|  | static ext4_fsblk_t ext4_find_near(struct inode *inode, Indirect *ind) | 
|  | { | 
|  | struct ext4_inode_info *ei = EXT4_I(inode); | 
|  | __le32 *start = ind->bh ? (__le32 *) ind->bh->b_data : ei->i_data; | 
|  | __le32 *p; | 
|  | ext4_fsblk_t bg_start; | 
|  | ext4_fsblk_t last_block; | 
|  | ext4_grpblk_t colour; | 
|  | ext4_group_t block_group; | 
|  | int flex_size = ext4_flex_bg_size(EXT4_SB(inode->i_sb)); | 
|  |  | 
|  | /* Try to find previous block */ | 
|  | for (p = ind->p - 1; p >= start; p--) { | 
|  | if (*p) | 
|  | return le32_to_cpu(*p); | 
|  | } | 
|  |  | 
|  | /* No such thing, so let's try location of indirect block */ | 
|  | if (ind->bh) | 
|  | return ind->bh->b_blocknr; | 
|  |  | 
|  | /* | 
|  | * It is going to be referred to from the inode itself? OK, just put it | 
|  | * into the same cylinder group then. | 
|  | */ | 
|  | block_group = ei->i_block_group; | 
|  | if (flex_size >= EXT4_FLEX_SIZE_DIR_ALLOC_SCHEME) { | 
|  | block_group &= ~(flex_size-1); | 
|  | if (S_ISREG(inode->i_mode)) | 
|  | block_group++; | 
|  | } | 
|  | bg_start = ext4_group_first_block_no(inode->i_sb, block_group); | 
|  | last_block = ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es) - 1; | 
|  |  | 
|  | /* | 
|  | * If we are doing delayed allocation, we don't need take | 
|  | * colour into account. | 
|  | */ | 
|  | if (test_opt(inode->i_sb, DELALLOC)) | 
|  | return bg_start; | 
|  |  | 
|  | if (bg_start + EXT4_BLOCKS_PER_GROUP(inode->i_sb) <= last_block) | 
|  | colour = (current->pid % 16) * | 
|  | (EXT4_BLOCKS_PER_GROUP(inode->i_sb) / 16); | 
|  | else | 
|  | colour = (current->pid % 16) * ((last_block - bg_start) / 16); | 
|  | return bg_start + colour; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ext4_find_goal - find a preferred place for allocation. | 
|  | *	@inode: owner | 
|  | *	@block:  block we want | 
|  | *	@partial: pointer to the last triple within a chain | 
|  | * | 
|  | *	Normally this function find the preferred place for block allocation, | 
|  | *	returns it. | 
|  | *	Because this is only used for non-extent files, we limit the block nr | 
|  | *	to 32 bits. | 
|  | */ | 
|  | static ext4_fsblk_t ext4_find_goal(struct inode *inode, ext4_lblk_t block, | 
|  | Indirect *partial) | 
|  | { | 
|  | ext4_fsblk_t goal; | 
|  |  | 
|  | /* | 
|  | * XXX need to get goal block from mballoc's data structures | 
|  | */ | 
|  |  | 
|  | goal = ext4_find_near(inode, partial); | 
|  | goal = goal & EXT4_MAX_BLOCK_FILE_PHYS; | 
|  | return goal; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ext4_blks_to_allocate: Look up the block map and count the number | 
|  | *	of direct blocks need to be allocated for the given branch. | 
|  | * | 
|  | *	@branch: chain of indirect blocks | 
|  | *	@k: number of blocks need for indirect blocks | 
|  | *	@blks: number of data blocks to be mapped. | 
|  | *	@blocks_to_boundary:  the offset in the indirect block | 
|  | * | 
|  | *	return the total number of blocks to be allocate, including the | 
|  | *	direct and indirect blocks. | 
|  | */ | 
|  | static int ext4_blks_to_allocate(Indirect *branch, int k, unsigned int blks, | 
|  | int blocks_to_boundary) | 
|  | { | 
|  | unsigned int count = 0; | 
|  |  | 
|  | /* | 
|  | * Simple case, [t,d]Indirect block(s) has not allocated yet | 
|  | * then it's clear blocks on that path have not allocated | 
|  | */ | 
|  | if (k > 0) { | 
|  | /* right now we don't handle cross boundary allocation */ | 
|  | if (blks < blocks_to_boundary + 1) | 
|  | count += blks; | 
|  | else | 
|  | count += blocks_to_boundary + 1; | 
|  | return count; | 
|  | } | 
|  |  | 
|  | count++; | 
|  | while (count < blks && count <= blocks_to_boundary && | 
|  | le32_to_cpu(*(branch[0].p + count)) == 0) { | 
|  | count++; | 
|  | } | 
|  | return count; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ext4_alloc_blocks: multiple allocate blocks needed for a branch | 
|  | *	@indirect_blks: the number of blocks need to allocate for indirect | 
|  | *			blocks | 
|  | * | 
|  | *	@new_blocks: on return it will store the new block numbers for | 
|  | *	the indirect blocks(if needed) and the first direct block, | 
|  | *	@blks:	on return it will store the total number of allocated | 
|  | *		direct blocks | 
|  | */ | 
|  | static int ext4_alloc_blocks(handle_t *handle, struct inode *inode, | 
|  | ext4_lblk_t iblock, ext4_fsblk_t goal, | 
|  | int indirect_blks, int blks, | 
|  | ext4_fsblk_t new_blocks[4], int *err) | 
|  | { | 
|  | struct ext4_allocation_request ar; | 
|  | int target, i; | 
|  | unsigned long count = 0, blk_allocated = 0; | 
|  | int index = 0; | 
|  | ext4_fsblk_t current_block = 0; | 
|  | int ret = 0; | 
|  |  | 
|  | /* | 
|  | * Here we try to allocate the requested multiple blocks at once, | 
|  | * on a best-effort basis. | 
|  | * To build a branch, we should allocate blocks for | 
|  | * the indirect blocks(if not allocated yet), and at least | 
|  | * the first direct block of this branch.  That's the | 
|  | * minimum number of blocks need to allocate(required) | 
|  | */ | 
|  | /* first we try to allocate the indirect blocks */ | 
|  | target = indirect_blks; | 
|  | while (target > 0) { | 
|  | count = target; | 
|  | /* allocating blocks for indirect blocks and direct blocks */ | 
|  | current_block = ext4_new_meta_blocks(handle, inode, | 
|  | goal, &count, err); | 
|  | if (*err) | 
|  | goto failed_out; | 
|  |  | 
|  | if (unlikely(current_block + count > EXT4_MAX_BLOCK_FILE_PHYS)) { | 
|  | EXT4_ERROR_INODE(inode, | 
|  | "current_block %llu + count %lu > %d!", | 
|  | current_block, count, | 
|  | EXT4_MAX_BLOCK_FILE_PHYS); | 
|  | *err = -EIO; | 
|  | goto failed_out; | 
|  | } | 
|  |  | 
|  | target -= count; | 
|  | /* allocate blocks for indirect blocks */ | 
|  | while (index < indirect_blks && count) { | 
|  | new_blocks[index++] = current_block++; | 
|  | count--; | 
|  | } | 
|  | if (count > 0) { | 
|  | /* | 
|  | * save the new block number | 
|  | * for the first direct block | 
|  | */ | 
|  | new_blocks[index] = current_block; | 
|  | printk(KERN_INFO "%s returned more blocks than " | 
|  | "requested\n", __func__); | 
|  | WARN_ON(1); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | target = blks - count ; | 
|  | blk_allocated = count; | 
|  | if (!target) | 
|  | goto allocated; | 
|  | /* Now allocate data blocks */ | 
|  | memset(&ar, 0, sizeof(ar)); | 
|  | ar.inode = inode; | 
|  | ar.goal = goal; | 
|  | ar.len = target; | 
|  | ar.logical = iblock; | 
|  | if (S_ISREG(inode->i_mode)) | 
|  | /* enable in-core preallocation only for regular files */ | 
|  | ar.flags = EXT4_MB_HINT_DATA; | 
|  |  | 
|  | current_block = ext4_mb_new_blocks(handle, &ar, err); | 
|  | if (unlikely(current_block + ar.len > EXT4_MAX_BLOCK_FILE_PHYS)) { | 
|  | EXT4_ERROR_INODE(inode, | 
|  | "current_block %llu + ar.len %d > %d!", | 
|  | current_block, ar.len, | 
|  | EXT4_MAX_BLOCK_FILE_PHYS); | 
|  | *err = -EIO; | 
|  | goto failed_out; | 
|  | } | 
|  |  | 
|  | if (*err && (target == blks)) { | 
|  | /* | 
|  | * if the allocation failed and we didn't allocate | 
|  | * any blocks before | 
|  | */ | 
|  | goto failed_out; | 
|  | } | 
|  | if (!*err) { | 
|  | if (target == blks) { | 
|  | /* | 
|  | * save the new block number | 
|  | * for the first direct block | 
|  | */ | 
|  | new_blocks[index] = current_block; | 
|  | } | 
|  | blk_allocated += ar.len; | 
|  | } | 
|  | allocated: | 
|  | /* total number of blocks allocated for direct blocks */ | 
|  | ret = blk_allocated; | 
|  | *err = 0; | 
|  | return ret; | 
|  | failed_out: | 
|  | for (i = 0; i < index; i++) | 
|  | ext4_free_blocks(handle, inode, 0, new_blocks[i], 1, 0); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ext4_alloc_branch - allocate and set up a chain of blocks. | 
|  | *	@inode: owner | 
|  | *	@indirect_blks: number of allocated indirect blocks | 
|  | *	@blks: number of allocated direct blocks | 
|  | *	@offsets: offsets (in the blocks) to store the pointers to next. | 
|  | *	@branch: place to store the chain in. | 
|  | * | 
|  | *	This function allocates blocks, zeroes out all but the last one, | 
|  | *	links them into chain and (if we are synchronous) writes them to disk. | 
|  | *	In other words, it prepares a branch that can be spliced onto the | 
|  | *	inode. It stores the information about that chain in the branch[], in | 
|  | *	the same format as ext4_get_branch() would do. We are calling it after | 
|  | *	we had read the existing part of chain and partial points to the last | 
|  | *	triple of that (one with zero ->key). Upon the exit we have the same | 
|  | *	picture as after the successful ext4_get_block(), except that in one | 
|  | *	place chain is disconnected - *branch->p is still zero (we did not | 
|  | *	set the last link), but branch->key contains the number that should | 
|  | *	be placed into *branch->p to fill that gap. | 
|  | * | 
|  | *	If allocation fails we free all blocks we've allocated (and forget | 
|  | *	their buffer_heads) and return the error value the from failed | 
|  | *	ext4_alloc_block() (normally -ENOSPC). Otherwise we set the chain | 
|  | *	as described above and return 0. | 
|  | */ | 
|  | static int ext4_alloc_branch(handle_t *handle, struct inode *inode, | 
|  | ext4_lblk_t iblock, int indirect_blks, | 
|  | int *blks, ext4_fsblk_t goal, | 
|  | ext4_lblk_t *offsets, Indirect *branch) | 
|  | { | 
|  | int blocksize = inode->i_sb->s_blocksize; | 
|  | int i, n = 0; | 
|  | int err = 0; | 
|  | struct buffer_head *bh; | 
|  | int num; | 
|  | ext4_fsblk_t new_blocks[4]; | 
|  | ext4_fsblk_t current_block; | 
|  |  | 
|  | num = ext4_alloc_blocks(handle, inode, iblock, goal, indirect_blks, | 
|  | *blks, new_blocks, &err); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | branch[0].key = cpu_to_le32(new_blocks[0]); | 
|  | /* | 
|  | * metadata blocks and data blocks are allocated. | 
|  | */ | 
|  | for (n = 1; n <= indirect_blks;  n++) { | 
|  | /* | 
|  | * Get buffer_head for parent block, zero it out | 
|  | * and set the pointer to new one, then send | 
|  | * parent to disk. | 
|  | */ | 
|  | bh = sb_getblk(inode->i_sb, new_blocks[n-1]); | 
|  | branch[n].bh = bh; | 
|  | lock_buffer(bh); | 
|  | BUFFER_TRACE(bh, "call get_create_access"); | 
|  | err = ext4_journal_get_create_access(handle, bh); | 
|  | if (err) { | 
|  | /* Don't brelse(bh) here; it's done in | 
|  | * ext4_journal_forget() below */ | 
|  | unlock_buffer(bh); | 
|  | goto failed; | 
|  | } | 
|  |  | 
|  | memset(bh->b_data, 0, blocksize); | 
|  | branch[n].p = (__le32 *) bh->b_data + offsets[n]; | 
|  | branch[n].key = cpu_to_le32(new_blocks[n]); | 
|  | *branch[n].p = branch[n].key; | 
|  | if (n == indirect_blks) { | 
|  | current_block = new_blocks[n]; | 
|  | /* | 
|  | * End of chain, update the last new metablock of | 
|  | * the chain to point to the new allocated | 
|  | * data blocks numbers | 
|  | */ | 
|  | for (i = 1; i < num; i++) | 
|  | *(branch[n].p + i) = cpu_to_le32(++current_block); | 
|  | } | 
|  | BUFFER_TRACE(bh, "marking uptodate"); | 
|  | set_buffer_uptodate(bh); | 
|  | unlock_buffer(bh); | 
|  |  | 
|  | BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); | 
|  | err = ext4_handle_dirty_metadata(handle, inode, bh); | 
|  | if (err) | 
|  | goto failed; | 
|  | } | 
|  | *blks = num; | 
|  | return err; | 
|  | failed: | 
|  | /* Allocation failed, free what we already allocated */ | 
|  | ext4_free_blocks(handle, inode, 0, new_blocks[0], 1, 0); | 
|  | for (i = 1; i <= n ; i++) { | 
|  | /* | 
|  | * branch[i].bh is newly allocated, so there is no | 
|  | * need to revoke the block, which is why we don't | 
|  | * need to set EXT4_FREE_BLOCKS_METADATA. | 
|  | */ | 
|  | ext4_free_blocks(handle, inode, 0, new_blocks[i], 1, | 
|  | EXT4_FREE_BLOCKS_FORGET); | 
|  | } | 
|  | for (i = n+1; i < indirect_blks; i++) | 
|  | ext4_free_blocks(handle, inode, 0, new_blocks[i], 1, 0); | 
|  |  | 
|  | ext4_free_blocks(handle, inode, 0, new_blocks[i], num, 0); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ext4_splice_branch - splice the allocated branch onto inode. | 
|  | * @inode: owner | 
|  | * @block: (logical) number of block we are adding | 
|  | * @chain: chain of indirect blocks (with a missing link - see | 
|  | *	ext4_alloc_branch) | 
|  | * @where: location of missing link | 
|  | * @num:   number of indirect blocks we are adding | 
|  | * @blks:  number of direct blocks we are adding | 
|  | * | 
|  | * This function fills the missing link and does all housekeeping needed in | 
|  | * inode (->i_blocks, etc.). In case of success we end up with the full | 
|  | * chain to new block and return 0. | 
|  | */ | 
|  | static int ext4_splice_branch(handle_t *handle, struct inode *inode, | 
|  | ext4_lblk_t block, Indirect *where, int num, | 
|  | int blks) | 
|  | { | 
|  | int i; | 
|  | int err = 0; | 
|  | ext4_fsblk_t current_block; | 
|  |  | 
|  | /* | 
|  | * If we're splicing into a [td]indirect block (as opposed to the | 
|  | * inode) then we need to get write access to the [td]indirect block | 
|  | * before the splice. | 
|  | */ | 
|  | if (where->bh) { | 
|  | BUFFER_TRACE(where->bh, "get_write_access"); | 
|  | err = ext4_journal_get_write_access(handle, where->bh); | 
|  | if (err) | 
|  | goto err_out; | 
|  | } | 
|  | /* That's it */ | 
|  |  | 
|  | *where->p = where->key; | 
|  |  | 
|  | /* | 
|  | * Update the host buffer_head or inode to point to more just allocated | 
|  | * direct blocks blocks | 
|  | */ | 
|  | if (num == 0 && blks > 1) { | 
|  | current_block = le32_to_cpu(where->key) + 1; | 
|  | for (i = 1; i < blks; i++) | 
|  | *(where->p + i) = cpu_to_le32(current_block++); | 
|  | } | 
|  |  | 
|  | /* We are done with atomic stuff, now do the rest of housekeeping */ | 
|  | /* had we spliced it onto indirect block? */ | 
|  | if (where->bh) { | 
|  | /* | 
|  | * If we spliced it onto an indirect block, we haven't | 
|  | * altered the inode.  Note however that if it is being spliced | 
|  | * onto an indirect block at the very end of the file (the | 
|  | * file is growing) then we *will* alter the inode to reflect | 
|  | * the new i_size.  But that is not done here - it is done in | 
|  | * generic_commit_write->__mark_inode_dirty->ext4_dirty_inode. | 
|  | */ | 
|  | jbd_debug(5, "splicing indirect only\n"); | 
|  | BUFFER_TRACE(where->bh, "call ext4_handle_dirty_metadata"); | 
|  | err = ext4_handle_dirty_metadata(handle, inode, where->bh); | 
|  | if (err) | 
|  | goto err_out; | 
|  | } else { | 
|  | /* | 
|  | * OK, we spliced it into the inode itself on a direct block. | 
|  | */ | 
|  | ext4_mark_inode_dirty(handle, inode); | 
|  | jbd_debug(5, "splicing direct\n"); | 
|  | } | 
|  | return err; | 
|  |  | 
|  | err_out: | 
|  | for (i = 1; i <= num; i++) { | 
|  | /* | 
|  | * branch[i].bh is newly allocated, so there is no | 
|  | * need to revoke the block, which is why we don't | 
|  | * need to set EXT4_FREE_BLOCKS_METADATA. | 
|  | */ | 
|  | ext4_free_blocks(handle, inode, where[i].bh, 0, 1, | 
|  | EXT4_FREE_BLOCKS_FORGET); | 
|  | } | 
|  | ext4_free_blocks(handle, inode, 0, le32_to_cpu(where[num].key), | 
|  | blks, 0); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The ext4_ind_get_blocks() function handles non-extents inodes | 
|  | * (i.e., using the traditional indirect/double-indirect i_blocks | 
|  | * scheme) for ext4_get_blocks(). | 
|  | * | 
|  | * Allocation strategy is simple: if we have to allocate something, we will | 
|  | * have to go the whole way to leaf. So let's do it before attaching anything | 
|  | * to tree, set linkage between the newborn blocks, write them if sync is | 
|  | * required, recheck the path, free and repeat if check fails, otherwise | 
|  | * set the last missing link (that will protect us from any truncate-generated | 
|  | * removals - all blocks on the path are immune now) and possibly force the | 
|  | * write on the parent block. | 
|  | * That has a nice additional property: no special recovery from the failed | 
|  | * allocations is needed - we simply release blocks and do not touch anything | 
|  | * reachable from inode. | 
|  | * | 
|  | * `handle' can be NULL if create == 0. | 
|  | * | 
|  | * return > 0, # of blocks mapped or allocated. | 
|  | * return = 0, if plain lookup failed. | 
|  | * return < 0, error case. | 
|  | * | 
|  | * The ext4_ind_get_blocks() function should be called with | 
|  | * down_write(&EXT4_I(inode)->i_data_sem) if allocating filesystem | 
|  | * blocks (i.e., flags has EXT4_GET_BLOCKS_CREATE set) or | 
|  | * down_read(&EXT4_I(inode)->i_data_sem) if not allocating file system | 
|  | * blocks. | 
|  | */ | 
|  | static int ext4_ind_get_blocks(handle_t *handle, struct inode *inode, | 
|  | ext4_lblk_t iblock, unsigned int maxblocks, | 
|  | struct buffer_head *bh_result, | 
|  | int flags) | 
|  | { | 
|  | int err = -EIO; | 
|  | ext4_lblk_t offsets[4]; | 
|  | Indirect chain[4]; | 
|  | Indirect *partial; | 
|  | ext4_fsblk_t goal; | 
|  | int indirect_blks; | 
|  | int blocks_to_boundary = 0; | 
|  | int depth; | 
|  | int count = 0; | 
|  | ext4_fsblk_t first_block = 0; | 
|  |  | 
|  | J_ASSERT(!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)); | 
|  | J_ASSERT(handle != NULL || (flags & EXT4_GET_BLOCKS_CREATE) == 0); | 
|  | depth = ext4_block_to_path(inode, iblock, offsets, | 
|  | &blocks_to_boundary); | 
|  |  | 
|  | if (depth == 0) | 
|  | goto out; | 
|  |  | 
|  | partial = ext4_get_branch(inode, depth, offsets, chain, &err); | 
|  |  | 
|  | /* Simplest case - block found, no allocation needed */ | 
|  | if (!partial) { | 
|  | first_block = le32_to_cpu(chain[depth - 1].key); | 
|  | clear_buffer_new(bh_result); | 
|  | count++; | 
|  | /*map more blocks*/ | 
|  | while (count < maxblocks && count <= blocks_to_boundary) { | 
|  | ext4_fsblk_t blk; | 
|  |  | 
|  | blk = le32_to_cpu(*(chain[depth-1].p + count)); | 
|  |  | 
|  | if (blk == first_block + count) | 
|  | count++; | 
|  | else | 
|  | break; | 
|  | } | 
|  | goto got_it; | 
|  | } | 
|  |  | 
|  | /* Next simple case - plain lookup or failed read of indirect block */ | 
|  | if ((flags & EXT4_GET_BLOCKS_CREATE) == 0 || err == -EIO) | 
|  | goto cleanup; | 
|  |  | 
|  | /* | 
|  | * Okay, we need to do block allocation. | 
|  | */ | 
|  | goal = ext4_find_goal(inode, iblock, partial); | 
|  |  | 
|  | /* the number of blocks need to allocate for [d,t]indirect blocks */ | 
|  | indirect_blks = (chain + depth) - partial - 1; | 
|  |  | 
|  | /* | 
|  | * Next look up the indirect map to count the totoal number of | 
|  | * direct blocks to allocate for this branch. | 
|  | */ | 
|  | count = ext4_blks_to_allocate(partial, indirect_blks, | 
|  | maxblocks, blocks_to_boundary); | 
|  | /* | 
|  | * Block out ext4_truncate while we alter the tree | 
|  | */ | 
|  | err = ext4_alloc_branch(handle, inode, iblock, indirect_blks, | 
|  | &count, goal, | 
|  | offsets + (partial - chain), partial); | 
|  |  | 
|  | /* | 
|  | * The ext4_splice_branch call will free and forget any buffers | 
|  | * on the new chain if there is a failure, but that risks using | 
|  | * up transaction credits, especially for bitmaps where the | 
|  | * credits cannot be returned.  Can we handle this somehow?  We | 
|  | * may need to return -EAGAIN upwards in the worst case.  --sct | 
|  | */ | 
|  | if (!err) | 
|  | err = ext4_splice_branch(handle, inode, iblock, | 
|  | partial, indirect_blks, count); | 
|  | if (err) | 
|  | goto cleanup; | 
|  |  | 
|  | set_buffer_new(bh_result); | 
|  |  | 
|  | ext4_update_inode_fsync_trans(handle, inode, 1); | 
|  | got_it: | 
|  | map_bh(bh_result, inode->i_sb, le32_to_cpu(chain[depth-1].key)); | 
|  | if (count > blocks_to_boundary) | 
|  | set_buffer_boundary(bh_result); | 
|  | err = count; | 
|  | /* Clean up and exit */ | 
|  | partial = chain + depth - 1;	/* the whole chain */ | 
|  | cleanup: | 
|  | while (partial > chain) { | 
|  | BUFFER_TRACE(partial->bh, "call brelse"); | 
|  | brelse(partial->bh); | 
|  | partial--; | 
|  | } | 
|  | BUFFER_TRACE(bh_result, "returned"); | 
|  | out: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_QUOTA | 
|  | qsize_t *ext4_get_reserved_space(struct inode *inode) | 
|  | { | 
|  | return &EXT4_I(inode)->i_reserved_quota; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /* | 
|  | * Calculate the number of metadata blocks need to reserve | 
|  | * to allocate a new block at @lblocks for non extent file based file | 
|  | */ | 
|  | static int ext4_indirect_calc_metadata_amount(struct inode *inode, | 
|  | sector_t lblock) | 
|  | { | 
|  | struct ext4_inode_info *ei = EXT4_I(inode); | 
|  | int dind_mask = EXT4_ADDR_PER_BLOCK(inode->i_sb) - 1; | 
|  | int blk_bits; | 
|  |  | 
|  | if (lblock < EXT4_NDIR_BLOCKS) | 
|  | return 0; | 
|  |  | 
|  | lblock -= EXT4_NDIR_BLOCKS; | 
|  |  | 
|  | if (ei->i_da_metadata_calc_len && | 
|  | (lblock & dind_mask) == ei->i_da_metadata_calc_last_lblock) { | 
|  | ei->i_da_metadata_calc_len++; | 
|  | return 0; | 
|  | } | 
|  | ei->i_da_metadata_calc_last_lblock = lblock & dind_mask; | 
|  | ei->i_da_metadata_calc_len = 1; | 
|  | blk_bits = roundup_pow_of_two(lblock + 1); | 
|  | return (blk_bits / EXT4_ADDR_PER_BLOCK_BITS(inode->i_sb)) + 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Calculate the number of metadata blocks need to reserve | 
|  | * to allocate a block located at @lblock | 
|  | */ | 
|  | static int ext4_calc_metadata_amount(struct inode *inode, sector_t lblock) | 
|  | { | 
|  | if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) | 
|  | return ext4_ext_calc_metadata_amount(inode, lblock); | 
|  |  | 
|  | return ext4_indirect_calc_metadata_amount(inode, lblock); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Called with i_data_sem down, which is important since we can call | 
|  | * ext4_discard_preallocations() from here. | 
|  | */ | 
|  | void ext4_da_update_reserve_space(struct inode *inode, | 
|  | int used, int quota_claim) | 
|  | { | 
|  | struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | 
|  | struct ext4_inode_info *ei = EXT4_I(inode); | 
|  | int mdb_free = 0, allocated_meta_blocks = 0; | 
|  |  | 
|  | spin_lock(&ei->i_block_reservation_lock); | 
|  | trace_ext4_da_update_reserve_space(inode, used); | 
|  | if (unlikely(used > ei->i_reserved_data_blocks)) { | 
|  | ext4_msg(inode->i_sb, KERN_NOTICE, "%s: ino %lu, used %d " | 
|  | "with only %d reserved data blocks\n", | 
|  | __func__, inode->i_ino, used, | 
|  | ei->i_reserved_data_blocks); | 
|  | WARN_ON(1); | 
|  | used = ei->i_reserved_data_blocks; | 
|  | } | 
|  |  | 
|  | /* Update per-inode reservations */ | 
|  | ei->i_reserved_data_blocks -= used; | 
|  | used += ei->i_allocated_meta_blocks; | 
|  | ei->i_reserved_meta_blocks -= ei->i_allocated_meta_blocks; | 
|  | allocated_meta_blocks = ei->i_allocated_meta_blocks; | 
|  | ei->i_allocated_meta_blocks = 0; | 
|  | percpu_counter_sub(&sbi->s_dirtyblocks_counter, used); | 
|  |  | 
|  | if (ei->i_reserved_data_blocks == 0) { | 
|  | /* | 
|  | * We can release all of the reserved metadata blocks | 
|  | * only when we have written all of the delayed | 
|  | * allocation blocks. | 
|  | */ | 
|  | mdb_free = ei->i_reserved_meta_blocks; | 
|  | ei->i_reserved_meta_blocks = 0; | 
|  | ei->i_da_metadata_calc_len = 0; | 
|  | percpu_counter_sub(&sbi->s_dirtyblocks_counter, mdb_free); | 
|  | } | 
|  | spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | 
|  |  | 
|  | /* Update quota subsystem */ | 
|  | if (quota_claim) { | 
|  | dquot_claim_block(inode, used); | 
|  | if (mdb_free) | 
|  | dquot_release_reservation_block(inode, mdb_free); | 
|  | } else { | 
|  | /* | 
|  | * We did fallocate with an offset that is already delayed | 
|  | * allocated. So on delayed allocated writeback we should | 
|  | * not update the quota for allocated blocks. But then | 
|  | * converting an fallocate region to initialized region would | 
|  | * have caused a metadata allocation. So claim quota for | 
|  | * that | 
|  | */ | 
|  | if (allocated_meta_blocks) | 
|  | dquot_claim_block(inode, allocated_meta_blocks); | 
|  | dquot_release_reservation_block(inode, mdb_free + used); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If we have done all the pending block allocations and if | 
|  | * there aren't any writers on the inode, we can discard the | 
|  | * inode's preallocations. | 
|  | */ | 
|  | if ((ei->i_reserved_data_blocks == 0) && | 
|  | (atomic_read(&inode->i_writecount) == 0)) | 
|  | ext4_discard_preallocations(inode); | 
|  | } | 
|  |  | 
|  | static int check_block_validity(struct inode *inode, const char *msg, | 
|  | sector_t logical, sector_t phys, int len) | 
|  | { | 
|  | if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), phys, len)) { | 
|  | __ext4_error(inode->i_sb, msg, | 
|  | "inode #%lu logical block %llu mapped to %llu " | 
|  | "(size %d)", inode->i_ino, | 
|  | (unsigned long long) logical, | 
|  | (unsigned long long) phys, len); | 
|  | return -EIO; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return the number of contiguous dirty pages in a given inode | 
|  | * starting at page frame idx. | 
|  | */ | 
|  | static pgoff_t ext4_num_dirty_pages(struct inode *inode, pgoff_t idx, | 
|  | unsigned int max_pages) | 
|  | { | 
|  | struct address_space *mapping = inode->i_mapping; | 
|  | pgoff_t	index; | 
|  | struct pagevec pvec; | 
|  | pgoff_t num = 0; | 
|  | int i, nr_pages, done = 0; | 
|  |  | 
|  | if (max_pages == 0) | 
|  | return 0; | 
|  | pagevec_init(&pvec, 0); | 
|  | while (!done) { | 
|  | index = idx; | 
|  | nr_pages = pagevec_lookup_tag(&pvec, mapping, &index, | 
|  | PAGECACHE_TAG_DIRTY, | 
|  | (pgoff_t)PAGEVEC_SIZE); | 
|  | if (nr_pages == 0) | 
|  | break; | 
|  | for (i = 0; i < nr_pages; i++) { | 
|  | struct page *page = pvec.pages[i]; | 
|  | struct buffer_head *bh, *head; | 
|  |  | 
|  | lock_page(page); | 
|  | if (unlikely(page->mapping != mapping) || | 
|  | !PageDirty(page) || | 
|  | PageWriteback(page) || | 
|  | page->index != idx) { | 
|  | done = 1; | 
|  | unlock_page(page); | 
|  | break; | 
|  | } | 
|  | if (page_has_buffers(page)) { | 
|  | bh = head = page_buffers(page); | 
|  | do { | 
|  | if (!buffer_delay(bh) && | 
|  | !buffer_unwritten(bh)) | 
|  | done = 1; | 
|  | bh = bh->b_this_page; | 
|  | } while (!done && (bh != head)); | 
|  | } | 
|  | unlock_page(page); | 
|  | if (done) | 
|  | break; | 
|  | idx++; | 
|  | num++; | 
|  | if (num >= max_pages) | 
|  | break; | 
|  | } | 
|  | pagevec_release(&pvec); | 
|  | } | 
|  | return num; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The ext4_get_blocks() function tries to look up the requested blocks, | 
|  | * and returns if the blocks are already mapped. | 
|  | * | 
|  | * Otherwise it takes the write lock of the i_data_sem and allocate blocks | 
|  | * and store the allocated blocks in the result buffer head and mark it | 
|  | * mapped. | 
|  | * | 
|  | * If file type is extents based, it will call ext4_ext_get_blocks(), | 
|  | * Otherwise, call with ext4_ind_get_blocks() to handle indirect mapping | 
|  | * based files | 
|  | * | 
|  | * On success, it returns the number of blocks being mapped or allocate. | 
|  | * if create==0 and the blocks are pre-allocated and uninitialized block, | 
|  | * the result buffer head is unmapped. If the create ==1, it will make sure | 
|  | * the buffer head is mapped. | 
|  | * | 
|  | * It returns 0 if plain look up failed (blocks have not been allocated), in | 
|  | * that casem, buffer head is unmapped | 
|  | * | 
|  | * It returns the error in case of allocation failure. | 
|  | */ | 
|  | int ext4_get_blocks(handle_t *handle, struct inode *inode, sector_t block, | 
|  | unsigned int max_blocks, struct buffer_head *bh, | 
|  | int flags) | 
|  | { | 
|  | int retval; | 
|  |  | 
|  | clear_buffer_mapped(bh); | 
|  | clear_buffer_unwritten(bh); | 
|  |  | 
|  | ext_debug("ext4_get_blocks(): inode %lu, flag %d, max_blocks %u," | 
|  | "logical block %lu\n", inode->i_ino, flags, max_blocks, | 
|  | (unsigned long)block); | 
|  | /* | 
|  | * Try to see if we can get the block without requesting a new | 
|  | * file system block. | 
|  | */ | 
|  | down_read((&EXT4_I(inode)->i_data_sem)); | 
|  | if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) { | 
|  | retval =  ext4_ext_get_blocks(handle, inode, block, max_blocks, | 
|  | bh, 0); | 
|  | } else { | 
|  | retval = ext4_ind_get_blocks(handle, inode, block, max_blocks, | 
|  | bh, 0); | 
|  | } | 
|  | up_read((&EXT4_I(inode)->i_data_sem)); | 
|  |  | 
|  | if (retval > 0 && buffer_mapped(bh)) { | 
|  | int ret = check_block_validity(inode, "file system corruption", | 
|  | block, bh->b_blocknr, retval); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* If it is only a block(s) look up */ | 
|  | if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) | 
|  | return retval; | 
|  |  | 
|  | /* | 
|  | * Returns if the blocks have already allocated | 
|  | * | 
|  | * Note that if blocks have been preallocated | 
|  | * ext4_ext_get_block() returns th create = 0 | 
|  | * with buffer head unmapped. | 
|  | */ | 
|  | if (retval > 0 && buffer_mapped(bh)) | 
|  | return retval; | 
|  |  | 
|  | /* | 
|  | * When we call get_blocks without the create flag, the | 
|  | * BH_Unwritten flag could have gotten set if the blocks | 
|  | * requested were part of a uninitialized extent.  We need to | 
|  | * clear this flag now that we are committed to convert all or | 
|  | * part of the uninitialized extent to be an initialized | 
|  | * extent.  This is because we need to avoid the combination | 
|  | * of BH_Unwritten and BH_Mapped flags being simultaneously | 
|  | * set on the buffer_head. | 
|  | */ | 
|  | clear_buffer_unwritten(bh); | 
|  |  | 
|  | /* | 
|  | * New blocks allocate and/or writing to uninitialized extent | 
|  | * will possibly result in updating i_data, so we take | 
|  | * the write lock of i_data_sem, and call get_blocks() | 
|  | * with create == 1 flag. | 
|  | */ | 
|  | down_write((&EXT4_I(inode)->i_data_sem)); | 
|  |  | 
|  | /* | 
|  | * if the caller is from delayed allocation writeout path | 
|  | * we have already reserved fs blocks for allocation | 
|  | * let the underlying get_block() function know to | 
|  | * avoid double accounting | 
|  | */ | 
|  | if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) | 
|  | EXT4_I(inode)->i_delalloc_reserved_flag = 1; | 
|  | /* | 
|  | * We need to check for EXT4 here because migrate | 
|  | * could have changed the inode type in between | 
|  | */ | 
|  | if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) { | 
|  | retval =  ext4_ext_get_blocks(handle, inode, block, max_blocks, | 
|  | bh, flags); | 
|  | } else { | 
|  | retval = ext4_ind_get_blocks(handle, inode, block, | 
|  | max_blocks, bh, flags); | 
|  |  | 
|  | if (retval > 0 && buffer_new(bh)) { | 
|  | /* | 
|  | * We allocated new blocks which will result in | 
|  | * i_data's format changing.  Force the migrate | 
|  | * to fail by clearing migrate flags | 
|  | */ | 
|  | ext4_clear_inode_state(inode, EXT4_STATE_EXT_MIGRATE); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Update reserved blocks/metadata blocks after successful | 
|  | * block allocation which had been deferred till now. We don't | 
|  | * support fallocate for non extent files. So we can update | 
|  | * reserve space here. | 
|  | */ | 
|  | if ((retval > 0) && | 
|  | (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)) | 
|  | ext4_da_update_reserve_space(inode, retval, 1); | 
|  | } | 
|  | if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) | 
|  | EXT4_I(inode)->i_delalloc_reserved_flag = 0; | 
|  |  | 
|  | up_write((&EXT4_I(inode)->i_data_sem)); | 
|  | if (retval > 0 && buffer_mapped(bh)) { | 
|  | int ret = check_block_validity(inode, "file system " | 
|  | "corruption after allocation", | 
|  | block, bh->b_blocknr, retval); | 
|  | if (ret != 0) | 
|  | return ret; | 
|  | } | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | /* Maximum number of blocks we map for direct IO at once. */ | 
|  | #define DIO_MAX_BLOCKS 4096 | 
|  |  | 
|  | int ext4_get_block(struct inode *inode, sector_t iblock, | 
|  | struct buffer_head *bh_result, int create) | 
|  | { | 
|  | handle_t *handle = ext4_journal_current_handle(); | 
|  | int ret = 0, started = 0; | 
|  | unsigned max_blocks = bh_result->b_size >> inode->i_blkbits; | 
|  | int dio_credits; | 
|  |  | 
|  | if (create && !handle) { | 
|  | /* Direct IO write... */ | 
|  | if (max_blocks > DIO_MAX_BLOCKS) | 
|  | max_blocks = DIO_MAX_BLOCKS; | 
|  | dio_credits = ext4_chunk_trans_blocks(inode, max_blocks); | 
|  | handle = ext4_journal_start(inode, dio_credits); | 
|  | if (IS_ERR(handle)) { | 
|  | ret = PTR_ERR(handle); | 
|  | goto out; | 
|  | } | 
|  | started = 1; | 
|  | } | 
|  |  | 
|  | ret = ext4_get_blocks(handle, inode, iblock, max_blocks, bh_result, | 
|  | create ? EXT4_GET_BLOCKS_CREATE : 0); | 
|  | if (ret > 0) { | 
|  | bh_result->b_size = (ret << inode->i_blkbits); | 
|  | ret = 0; | 
|  | } | 
|  | if (started) | 
|  | ext4_journal_stop(handle); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * `handle' can be NULL if create is zero | 
|  | */ | 
|  | struct buffer_head *ext4_getblk(handle_t *handle, struct inode *inode, | 
|  | ext4_lblk_t block, int create, int *errp) | 
|  | { | 
|  | struct buffer_head dummy; | 
|  | int fatal = 0, err; | 
|  | int flags = 0; | 
|  |  | 
|  | J_ASSERT(handle != NULL || create == 0); | 
|  |  | 
|  | dummy.b_state = 0; | 
|  | dummy.b_blocknr = -1000; | 
|  | buffer_trace_init(&dummy.b_history); | 
|  | if (create) | 
|  | flags |= EXT4_GET_BLOCKS_CREATE; | 
|  | err = ext4_get_blocks(handle, inode, block, 1, &dummy, flags); | 
|  | /* | 
|  | * ext4_get_blocks() returns number of blocks mapped. 0 in | 
|  | * case of a HOLE. | 
|  | */ | 
|  | if (err > 0) { | 
|  | if (err > 1) | 
|  | WARN_ON(1); | 
|  | err = 0; | 
|  | } | 
|  | *errp = err; | 
|  | if (!err && buffer_mapped(&dummy)) { | 
|  | struct buffer_head *bh; | 
|  | bh = sb_getblk(inode->i_sb, dummy.b_blocknr); | 
|  | if (!bh) { | 
|  | *errp = -EIO; | 
|  | goto err; | 
|  | } | 
|  | if (buffer_new(&dummy)) { | 
|  | J_ASSERT(create != 0); | 
|  | J_ASSERT(handle != NULL); | 
|  |  | 
|  | /* | 
|  | * Now that we do not always journal data, we should | 
|  | * keep in mind whether this should always journal the | 
|  | * new buffer as metadata.  For now, regular file | 
|  | * writes use ext4_get_block instead, so it's not a | 
|  | * problem. | 
|  | */ | 
|  | lock_buffer(bh); | 
|  | BUFFER_TRACE(bh, "call get_create_access"); | 
|  | fatal = ext4_journal_get_create_access(handle, bh); | 
|  | if (!fatal && !buffer_uptodate(bh)) { | 
|  | memset(bh->b_data, 0, inode->i_sb->s_blocksize); | 
|  | set_buffer_uptodate(bh); | 
|  | } | 
|  | unlock_buffer(bh); | 
|  | BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); | 
|  | err = ext4_handle_dirty_metadata(handle, inode, bh); | 
|  | if (!fatal) | 
|  | fatal = err; | 
|  | } else { | 
|  | BUFFER_TRACE(bh, "not a new buffer"); | 
|  | } | 
|  | if (fatal) { | 
|  | *errp = fatal; | 
|  | brelse(bh); | 
|  | bh = NULL; | 
|  | } | 
|  | return bh; | 
|  | } | 
|  | err: | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | struct buffer_head *ext4_bread(handle_t *handle, struct inode *inode, | 
|  | ext4_lblk_t block, int create, int *err) | 
|  | { | 
|  | struct buffer_head *bh; | 
|  |  | 
|  | bh = ext4_getblk(handle, inode, block, create, err); | 
|  | if (!bh) | 
|  | return bh; | 
|  | if (buffer_uptodate(bh)) | 
|  | return bh; | 
|  | ll_rw_block(READ_META, 1, &bh); | 
|  | wait_on_buffer(bh); | 
|  | if (buffer_uptodate(bh)) | 
|  | return bh; | 
|  | put_bh(bh); | 
|  | *err = -EIO; | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int walk_page_buffers(handle_t *handle, | 
|  | struct buffer_head *head, | 
|  | unsigned from, | 
|  | unsigned to, | 
|  | int *partial, | 
|  | int (*fn)(handle_t *handle, | 
|  | struct buffer_head *bh)) | 
|  | { | 
|  | struct buffer_head *bh; | 
|  | unsigned block_start, block_end; | 
|  | unsigned blocksize = head->b_size; | 
|  | int err, ret = 0; | 
|  | struct buffer_head *next; | 
|  |  | 
|  | for (bh = head, block_start = 0; | 
|  | ret == 0 && (bh != head || !block_start); | 
|  | block_start = block_end, bh = next) { | 
|  | next = bh->b_this_page; | 
|  | block_end = block_start + blocksize; | 
|  | if (block_end <= from || block_start >= to) { | 
|  | if (partial && !buffer_uptodate(bh)) | 
|  | *partial = 1; | 
|  | continue; | 
|  | } | 
|  | err = (*fn)(handle, bh); | 
|  | if (!ret) | 
|  | ret = err; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * To preserve ordering, it is essential that the hole instantiation and | 
|  | * the data write be encapsulated in a single transaction.  We cannot | 
|  | * close off a transaction and start a new one between the ext4_get_block() | 
|  | * and the commit_write().  So doing the jbd2_journal_start at the start of | 
|  | * prepare_write() is the right place. | 
|  | * | 
|  | * Also, this function can nest inside ext4_writepage() -> | 
|  | * block_write_full_page(). In that case, we *know* that ext4_writepage() | 
|  | * has generated enough buffer credits to do the whole page.  So we won't | 
|  | * block on the journal in that case, which is good, because the caller may | 
|  | * be PF_MEMALLOC. | 
|  | * | 
|  | * By accident, ext4 can be reentered when a transaction is open via | 
|  | * quota file writes.  If we were to commit the transaction while thus | 
|  | * reentered, there can be a deadlock - we would be holding a quota | 
|  | * lock, and the commit would never complete if another thread had a | 
|  | * transaction open and was blocking on the quota lock - a ranking | 
|  | * violation. | 
|  | * | 
|  | * So what we do is to rely on the fact that jbd2_journal_stop/journal_start | 
|  | * will _not_ run commit under these circumstances because handle->h_ref | 
|  | * is elevated.  We'll still have enough credits for the tiny quotafile | 
|  | * write. | 
|  | */ | 
|  | static int do_journal_get_write_access(handle_t *handle, | 
|  | struct buffer_head *bh) | 
|  | { | 
|  | if (!buffer_mapped(bh) || buffer_freed(bh)) | 
|  | return 0; | 
|  | return ext4_journal_get_write_access(handle, bh); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Truncate blocks that were not used by write. We have to truncate the | 
|  | * pagecache as well so that corresponding buffers get properly unmapped. | 
|  | */ | 
|  | static void ext4_truncate_failed_write(struct inode *inode) | 
|  | { | 
|  | truncate_inode_pages(inode->i_mapping, inode->i_size); | 
|  | ext4_truncate(inode); | 
|  | } | 
|  |  | 
|  | static int ext4_get_block_write(struct inode *inode, sector_t iblock, | 
|  | struct buffer_head *bh_result, int create); | 
|  | static int ext4_write_begin(struct file *file, struct address_space *mapping, | 
|  | loff_t pos, unsigned len, unsigned flags, | 
|  | struct page **pagep, void **fsdata) | 
|  | { | 
|  | struct inode *inode = mapping->host; | 
|  | int ret, needed_blocks; | 
|  | handle_t *handle; | 
|  | int retries = 0; | 
|  | struct page *page; | 
|  | pgoff_t index; | 
|  | unsigned from, to; | 
|  |  | 
|  | trace_ext4_write_begin(inode, pos, len, flags); | 
|  | /* | 
|  | * Reserve one block more for addition to orphan list in case | 
|  | * we allocate blocks but write fails for some reason | 
|  | */ | 
|  | needed_blocks = ext4_writepage_trans_blocks(inode) + 1; | 
|  | index = pos >> PAGE_CACHE_SHIFT; | 
|  | from = pos & (PAGE_CACHE_SIZE - 1); | 
|  | to = from + len; | 
|  |  | 
|  | retry: | 
|  | handle = ext4_journal_start(inode, needed_blocks); | 
|  | if (IS_ERR(handle)) { | 
|  | ret = PTR_ERR(handle); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* We cannot recurse into the filesystem as the transaction is already | 
|  | * started */ | 
|  | flags |= AOP_FLAG_NOFS; | 
|  |  | 
|  | page = grab_cache_page_write_begin(mapping, index, flags); | 
|  | if (!page) { | 
|  | ext4_journal_stop(handle); | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  | *pagep = page; | 
|  |  | 
|  | if (ext4_should_dioread_nolock(inode)) | 
|  | ret = block_write_begin(file, mapping, pos, len, flags, pagep, | 
|  | fsdata, ext4_get_block_write); | 
|  | else | 
|  | ret = block_write_begin(file, mapping, pos, len, flags, pagep, | 
|  | fsdata, ext4_get_block); | 
|  |  | 
|  | if (!ret && ext4_should_journal_data(inode)) { | 
|  | ret = walk_page_buffers(handle, page_buffers(page), | 
|  | from, to, NULL, do_journal_get_write_access); | 
|  | } | 
|  |  | 
|  | if (ret) { | 
|  | unlock_page(page); | 
|  | page_cache_release(page); | 
|  | /* | 
|  | * block_write_begin may have instantiated a few blocks | 
|  | * outside i_size.  Trim these off again. Don't need | 
|  | * i_size_read because we hold i_mutex. | 
|  | * | 
|  | * Add inode to orphan list in case we crash before | 
|  | * truncate finishes | 
|  | */ | 
|  | if (pos + len > inode->i_size && ext4_can_truncate(inode)) | 
|  | ext4_orphan_add(handle, inode); | 
|  |  | 
|  | ext4_journal_stop(handle); | 
|  | if (pos + len > inode->i_size) { | 
|  | ext4_truncate_failed_write(inode); | 
|  | /* | 
|  | * If truncate failed early the inode might | 
|  | * still be on the orphan list; we need to | 
|  | * make sure the inode is removed from the | 
|  | * orphan list in that case. | 
|  | */ | 
|  | if (inode->i_nlink) | 
|  | ext4_orphan_del(NULL, inode); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) | 
|  | goto retry; | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* For write_end() in data=journal mode */ | 
|  | static int write_end_fn(handle_t *handle, struct buffer_head *bh) | 
|  | { | 
|  | if (!buffer_mapped(bh) || buffer_freed(bh)) | 
|  | return 0; | 
|  | set_buffer_uptodate(bh); | 
|  | return ext4_handle_dirty_metadata(handle, NULL, bh); | 
|  | } | 
|  |  | 
|  | static int ext4_generic_write_end(struct file *file, | 
|  | struct address_space *mapping, | 
|  | loff_t pos, unsigned len, unsigned copied, | 
|  | struct page *page, void *fsdata) | 
|  | { | 
|  | int i_size_changed = 0; | 
|  | struct inode *inode = mapping->host; | 
|  | handle_t *handle = ext4_journal_current_handle(); | 
|  |  | 
|  | copied = block_write_end(file, mapping, pos, len, copied, page, fsdata); | 
|  |  | 
|  | /* | 
|  | * No need to use i_size_read() here, the i_size | 
|  | * cannot change under us because we hold i_mutex. | 
|  | * | 
|  | * But it's important to update i_size while still holding page lock: | 
|  | * page writeout could otherwise come in and zero beyond i_size. | 
|  | */ | 
|  | if (pos + copied > inode->i_size) { | 
|  | i_size_write(inode, pos + copied); | 
|  | i_size_changed = 1; | 
|  | } | 
|  |  | 
|  | if (pos + copied >  EXT4_I(inode)->i_disksize) { | 
|  | /* We need to mark inode dirty even if | 
|  | * new_i_size is less that inode->i_size | 
|  | * bu greater than i_disksize.(hint delalloc) | 
|  | */ | 
|  | ext4_update_i_disksize(inode, (pos + copied)); | 
|  | i_size_changed = 1; | 
|  | } | 
|  | unlock_page(page); | 
|  | page_cache_release(page); | 
|  |  | 
|  | /* | 
|  | * Don't mark the inode dirty under page lock. First, it unnecessarily | 
|  | * makes the holding time of page lock longer. Second, it forces lock | 
|  | * ordering of page lock and transaction start for journaling | 
|  | * filesystems. | 
|  | */ | 
|  | if (i_size_changed) | 
|  | ext4_mark_inode_dirty(handle, inode); | 
|  |  | 
|  | return copied; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We need to pick up the new inode size which generic_commit_write gave us | 
|  | * `file' can be NULL - eg, when called from page_symlink(). | 
|  | * | 
|  | * ext4 never places buffers on inode->i_mapping->private_list.  metadata | 
|  | * buffers are managed internally. | 
|  | */ | 
|  | static int ext4_ordered_write_end(struct file *file, | 
|  | struct address_space *mapping, | 
|  | loff_t pos, unsigned len, unsigned copied, | 
|  | struct page *page, void *fsdata) | 
|  | { | 
|  | handle_t *handle = ext4_journal_current_handle(); | 
|  | struct inode *inode = mapping->host; | 
|  | int ret = 0, ret2; | 
|  |  | 
|  | trace_ext4_ordered_write_end(inode, pos, len, copied); | 
|  | ret = ext4_jbd2_file_inode(handle, inode); | 
|  |  | 
|  | if (ret == 0) { | 
|  | ret2 = ext4_generic_write_end(file, mapping, pos, len, copied, | 
|  | page, fsdata); | 
|  | copied = ret2; | 
|  | if (pos + len > inode->i_size && ext4_can_truncate(inode)) | 
|  | /* if we have allocated more blocks and copied | 
|  | * less. We will have blocks allocated outside | 
|  | * inode->i_size. So truncate them | 
|  | */ | 
|  | ext4_orphan_add(handle, inode); | 
|  | if (ret2 < 0) | 
|  | ret = ret2; | 
|  | } | 
|  | ret2 = ext4_journal_stop(handle); | 
|  | if (!ret) | 
|  | ret = ret2; | 
|  |  | 
|  | if (pos + len > inode->i_size) { | 
|  | ext4_truncate_failed_write(inode); | 
|  | /* | 
|  | * If truncate failed early the inode might still be | 
|  | * on the orphan list; we need to make sure the inode | 
|  | * is removed from the orphan list in that case. | 
|  | */ | 
|  | if (inode->i_nlink) | 
|  | ext4_orphan_del(NULL, inode); | 
|  | } | 
|  |  | 
|  |  | 
|  | return ret ? ret : copied; | 
|  | } | 
|  |  | 
|  | static int ext4_writeback_write_end(struct file *file, | 
|  | struct address_space *mapping, | 
|  | loff_t pos, unsigned len, unsigned copied, | 
|  | struct page *page, void *fsdata) | 
|  | { | 
|  | handle_t *handle = ext4_journal_current_handle(); | 
|  | struct inode *inode = mapping->host; | 
|  | int ret = 0, ret2; | 
|  |  | 
|  | trace_ext4_writeback_write_end(inode, pos, len, copied); | 
|  | ret2 = ext4_generic_write_end(file, mapping, pos, len, copied, | 
|  | page, fsdata); | 
|  | copied = ret2; | 
|  | if (pos + len > inode->i_size && ext4_can_truncate(inode)) | 
|  | /* if we have allocated more blocks and copied | 
|  | * less. We will have blocks allocated outside | 
|  | * inode->i_size. So truncate them | 
|  | */ | 
|  | ext4_orphan_add(handle, inode); | 
|  |  | 
|  | if (ret2 < 0) | 
|  | ret = ret2; | 
|  |  | 
|  | ret2 = ext4_journal_stop(handle); | 
|  | if (!ret) | 
|  | ret = ret2; | 
|  |  | 
|  | if (pos + len > inode->i_size) { | 
|  | ext4_truncate_failed_write(inode); | 
|  | /* | 
|  | * If truncate failed early the inode might still be | 
|  | * on the orphan list; we need to make sure the inode | 
|  | * is removed from the orphan list in that case. | 
|  | */ | 
|  | if (inode->i_nlink) | 
|  | ext4_orphan_del(NULL, inode); | 
|  | } | 
|  |  | 
|  | return ret ? ret : copied; | 
|  | } | 
|  |  | 
|  | static int ext4_journalled_write_end(struct file *file, | 
|  | struct address_space *mapping, | 
|  | loff_t pos, unsigned len, unsigned copied, | 
|  | struct page *page, void *fsdata) | 
|  | { | 
|  | handle_t *handle = ext4_journal_current_handle(); | 
|  | struct inode *inode = mapping->host; | 
|  | int ret = 0, ret2; | 
|  | int partial = 0; | 
|  | unsigned from, to; | 
|  | loff_t new_i_size; | 
|  |  | 
|  | trace_ext4_journalled_write_end(inode, pos, len, copied); | 
|  | from = pos & (PAGE_CACHE_SIZE - 1); | 
|  | to = from + len; | 
|  |  | 
|  | if (copied < len) { | 
|  | if (!PageUptodate(page)) | 
|  | copied = 0; | 
|  | page_zero_new_buffers(page, from+copied, to); | 
|  | } | 
|  |  | 
|  | ret = walk_page_buffers(handle, page_buffers(page), from, | 
|  | to, &partial, write_end_fn); | 
|  | if (!partial) | 
|  | SetPageUptodate(page); | 
|  | new_i_size = pos + copied; | 
|  | if (new_i_size > inode->i_size) | 
|  | i_size_write(inode, pos+copied); | 
|  | ext4_set_inode_state(inode, EXT4_STATE_JDATA); | 
|  | if (new_i_size > EXT4_I(inode)->i_disksize) { | 
|  | ext4_update_i_disksize(inode, new_i_size); | 
|  | ret2 = ext4_mark_inode_dirty(handle, inode); | 
|  | if (!ret) | 
|  | ret = ret2; | 
|  | } | 
|  |  | 
|  | unlock_page(page); | 
|  | page_cache_release(page); | 
|  | if (pos + len > inode->i_size && ext4_can_truncate(inode)) | 
|  | /* if we have allocated more blocks and copied | 
|  | * less. We will have blocks allocated outside | 
|  | * inode->i_size. So truncate them | 
|  | */ | 
|  | ext4_orphan_add(handle, inode); | 
|  |  | 
|  | ret2 = ext4_journal_stop(handle); | 
|  | if (!ret) | 
|  | ret = ret2; | 
|  | if (pos + len > inode->i_size) { | 
|  | ext4_truncate_failed_write(inode); | 
|  | /* | 
|  | * If truncate failed early the inode might still be | 
|  | * on the orphan list; we need to make sure the inode | 
|  | * is removed from the orphan list in that case. | 
|  | */ | 
|  | if (inode->i_nlink) | 
|  | ext4_orphan_del(NULL, inode); | 
|  | } | 
|  |  | 
|  | return ret ? ret : copied; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Reserve a single block located at lblock | 
|  | */ | 
|  | static int ext4_da_reserve_space(struct inode *inode, sector_t lblock) | 
|  | { | 
|  | int retries = 0; | 
|  | struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | 
|  | struct ext4_inode_info *ei = EXT4_I(inode); | 
|  | unsigned long md_needed, md_reserved; | 
|  | int ret; | 
|  |  | 
|  | /* | 
|  | * recalculate the amount of metadata blocks to reserve | 
|  | * in order to allocate nrblocks | 
|  | * worse case is one extent per block | 
|  | */ | 
|  | repeat: | 
|  | spin_lock(&ei->i_block_reservation_lock); | 
|  | md_reserved = ei->i_reserved_meta_blocks; | 
|  | md_needed = ext4_calc_metadata_amount(inode, lblock); | 
|  | trace_ext4_da_reserve_space(inode, md_needed); | 
|  | spin_unlock(&ei->i_block_reservation_lock); | 
|  |  | 
|  | /* | 
|  | * Make quota reservation here to prevent quota overflow | 
|  | * later. Real quota accounting is done at pages writeout | 
|  | * time. | 
|  | */ | 
|  | ret = dquot_reserve_block(inode, md_needed + 1); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (ext4_claim_free_blocks(sbi, md_needed + 1)) { | 
|  | dquot_release_reservation_block(inode, md_needed + 1); | 
|  | if (ext4_should_retry_alloc(inode->i_sb, &retries)) { | 
|  | yield(); | 
|  | goto repeat; | 
|  | } | 
|  | return -ENOSPC; | 
|  | } | 
|  | spin_lock(&ei->i_block_reservation_lock); | 
|  | ei->i_reserved_data_blocks++; | 
|  | ei->i_reserved_meta_blocks += md_needed; | 
|  | spin_unlock(&ei->i_block_reservation_lock); | 
|  |  | 
|  | return 0;       /* success */ | 
|  | } | 
|  |  | 
|  | static void ext4_da_release_space(struct inode *inode, int to_free) | 
|  | { | 
|  | struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | 
|  | struct ext4_inode_info *ei = EXT4_I(inode); | 
|  |  | 
|  | if (!to_free) | 
|  | return;		/* Nothing to release, exit */ | 
|  |  | 
|  | spin_lock(&EXT4_I(inode)->i_block_reservation_lock); | 
|  |  | 
|  | if (unlikely(to_free > ei->i_reserved_data_blocks)) { | 
|  | /* | 
|  | * if there aren't enough reserved blocks, then the | 
|  | * counter is messed up somewhere.  Since this | 
|  | * function is called from invalidate page, it's | 
|  | * harmless to return without any action. | 
|  | */ | 
|  | ext4_msg(inode->i_sb, KERN_NOTICE, "ext4_da_release_space: " | 
|  | "ino %lu, to_free %d with only %d reserved " | 
|  | "data blocks\n", inode->i_ino, to_free, | 
|  | ei->i_reserved_data_blocks); | 
|  | WARN_ON(1); | 
|  | to_free = ei->i_reserved_data_blocks; | 
|  | } | 
|  | ei->i_reserved_data_blocks -= to_free; | 
|  |  | 
|  | if (ei->i_reserved_data_blocks == 0) { | 
|  | /* | 
|  | * We can release all of the reserved metadata blocks | 
|  | * only when we have written all of the delayed | 
|  | * allocation blocks. | 
|  | */ | 
|  | to_free += ei->i_reserved_meta_blocks; | 
|  | ei->i_reserved_meta_blocks = 0; | 
|  | ei->i_da_metadata_calc_len = 0; | 
|  | } | 
|  |  | 
|  | /* update fs dirty blocks counter */ | 
|  | percpu_counter_sub(&sbi->s_dirtyblocks_counter, to_free); | 
|  |  | 
|  | spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | 
|  |  | 
|  | dquot_release_reservation_block(inode, to_free); | 
|  | } | 
|  |  | 
|  | static void ext4_da_page_release_reservation(struct page *page, | 
|  | unsigned long offset) | 
|  | { | 
|  | int to_release = 0; | 
|  | struct buffer_head *head, *bh; | 
|  | unsigned int curr_off = 0; | 
|  |  | 
|  | head = page_buffers(page); | 
|  | bh = head; | 
|  | do { | 
|  | unsigned int next_off = curr_off + bh->b_size; | 
|  |  | 
|  | if ((offset <= curr_off) && (buffer_delay(bh))) { | 
|  | to_release++; | 
|  | clear_buffer_delay(bh); | 
|  | } | 
|  | curr_off = next_off; | 
|  | } while ((bh = bh->b_this_page) != head); | 
|  | ext4_da_release_space(page->mapping->host, to_release); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Delayed allocation stuff | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * mpage_da_submit_io - walks through extent of pages and try to write | 
|  | * them with writepage() call back | 
|  | * | 
|  | * @mpd->inode: inode | 
|  | * @mpd->first_page: first page of the extent | 
|  | * @mpd->next_page: page after the last page of the extent | 
|  | * | 
|  | * By the time mpage_da_submit_io() is called we expect all blocks | 
|  | * to be allocated. this may be wrong if allocation failed. | 
|  | * | 
|  | * As pages are already locked by write_cache_pages(), we can't use it | 
|  | */ | 
|  | static int mpage_da_submit_io(struct mpage_da_data *mpd) | 
|  | { | 
|  | long pages_skipped; | 
|  | struct pagevec pvec; | 
|  | unsigned long index, end; | 
|  | int ret = 0, err, nr_pages, i; | 
|  | struct inode *inode = mpd->inode; | 
|  | struct address_space *mapping = inode->i_mapping; | 
|  |  | 
|  | BUG_ON(mpd->next_page <= mpd->first_page); | 
|  | /* | 
|  | * We need to start from the first_page to the next_page - 1 | 
|  | * to make sure we also write the mapped dirty buffer_heads. | 
|  | * If we look at mpd->b_blocknr we would only be looking | 
|  | * at the currently mapped buffer_heads. | 
|  | */ | 
|  | index = mpd->first_page; | 
|  | end = mpd->next_page - 1; | 
|  |  | 
|  | pagevec_init(&pvec, 0); | 
|  | while (index <= end) { | 
|  | nr_pages = pagevec_lookup(&pvec, mapping, index, PAGEVEC_SIZE); | 
|  | if (nr_pages == 0) | 
|  | break; | 
|  | for (i = 0; i < nr_pages; i++) { | 
|  | struct page *page = pvec.pages[i]; | 
|  |  | 
|  | index = page->index; | 
|  | if (index > end) | 
|  | break; | 
|  | index++; | 
|  |  | 
|  | BUG_ON(!PageLocked(page)); | 
|  | BUG_ON(PageWriteback(page)); | 
|  |  | 
|  | pages_skipped = mpd->wbc->pages_skipped; | 
|  | err = mapping->a_ops->writepage(page, mpd->wbc); | 
|  | if (!err && (pages_skipped == mpd->wbc->pages_skipped)) | 
|  | /* | 
|  | * have successfully written the page | 
|  | * without skipping the same | 
|  | */ | 
|  | mpd->pages_written++; | 
|  | /* | 
|  | * In error case, we have to continue because | 
|  | * remaining pages are still locked | 
|  | * XXX: unlock and re-dirty them? | 
|  | */ | 
|  | if (ret == 0) | 
|  | ret = err; | 
|  | } | 
|  | pagevec_release(&pvec); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * mpage_put_bnr_to_bhs - walk blocks and assign them actual numbers | 
|  | * | 
|  | * @mpd->inode - inode to walk through | 
|  | * @exbh->b_blocknr - first block on a disk | 
|  | * @exbh->b_size - amount of space in bytes | 
|  | * @logical - first logical block to start assignment with | 
|  | * | 
|  | * the function goes through all passed space and put actual disk | 
|  | * block numbers into buffer heads, dropping BH_Delay and BH_Unwritten | 
|  | */ | 
|  | static void mpage_put_bnr_to_bhs(struct mpage_da_data *mpd, sector_t logical, | 
|  | struct buffer_head *exbh) | 
|  | { | 
|  | struct inode *inode = mpd->inode; | 
|  | struct address_space *mapping = inode->i_mapping; | 
|  | int blocks = exbh->b_size >> inode->i_blkbits; | 
|  | sector_t pblock = exbh->b_blocknr, cur_logical; | 
|  | struct buffer_head *head, *bh; | 
|  | pgoff_t index, end; | 
|  | struct pagevec pvec; | 
|  | int nr_pages, i; | 
|  |  | 
|  | index = logical >> (PAGE_CACHE_SHIFT - inode->i_blkbits); | 
|  | end = (logical + blocks - 1) >> (PAGE_CACHE_SHIFT - inode->i_blkbits); | 
|  | cur_logical = index << (PAGE_CACHE_SHIFT - inode->i_blkbits); | 
|  |  | 
|  | pagevec_init(&pvec, 0); | 
|  |  | 
|  | while (index <= end) { | 
|  | /* XXX: optimize tail */ | 
|  | nr_pages = pagevec_lookup(&pvec, mapping, index, PAGEVEC_SIZE); | 
|  | if (nr_pages == 0) | 
|  | break; | 
|  | for (i = 0; i < nr_pages; i++) { | 
|  | struct page *page = pvec.pages[i]; | 
|  |  | 
|  | index = page->index; | 
|  | if (index > end) | 
|  | break; | 
|  | index++; | 
|  |  | 
|  | BUG_ON(!PageLocked(page)); | 
|  | BUG_ON(PageWriteback(page)); | 
|  | BUG_ON(!page_has_buffers(page)); | 
|  |  | 
|  | bh = page_buffers(page); | 
|  | head = bh; | 
|  |  | 
|  | /* skip blocks out of the range */ | 
|  | do { | 
|  | if (cur_logical >= logical) | 
|  | break; | 
|  | cur_logical++; | 
|  | } while ((bh = bh->b_this_page) != head); | 
|  |  | 
|  | do { | 
|  | if (cur_logical >= logical + blocks) | 
|  | break; | 
|  |  | 
|  | if (buffer_delay(bh) || | 
|  | buffer_unwritten(bh)) { | 
|  |  | 
|  | BUG_ON(bh->b_bdev != inode->i_sb->s_bdev); | 
|  |  | 
|  | if (buffer_delay(bh)) { | 
|  | clear_buffer_delay(bh); | 
|  | bh->b_blocknr = pblock; | 
|  | } else { | 
|  | /* | 
|  | * unwritten already should have | 
|  | * blocknr assigned. Verify that | 
|  | */ | 
|  | clear_buffer_unwritten(bh); | 
|  | BUG_ON(bh->b_blocknr != pblock); | 
|  | } | 
|  |  | 
|  | } else if (buffer_mapped(bh)) | 
|  | BUG_ON(bh->b_blocknr != pblock); | 
|  |  | 
|  | if (buffer_uninit(exbh)) | 
|  | set_buffer_uninit(bh); | 
|  | cur_logical++; | 
|  | pblock++; | 
|  | } while ((bh = bh->b_this_page) != head); | 
|  | } | 
|  | pagevec_release(&pvec); | 
|  | } | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * __unmap_underlying_blocks - just a helper function to unmap | 
|  | * set of blocks described by @bh | 
|  | */ | 
|  | static inline void __unmap_underlying_blocks(struct inode *inode, | 
|  | struct buffer_head *bh) | 
|  | { | 
|  | struct block_device *bdev = inode->i_sb->s_bdev; | 
|  | int blocks, i; | 
|  |  | 
|  | blocks = bh->b_size >> inode->i_blkbits; | 
|  | for (i = 0; i < blocks; i++) | 
|  | unmap_underlying_metadata(bdev, bh->b_blocknr + i); | 
|  | } | 
|  |  | 
|  | static void ext4_da_block_invalidatepages(struct mpage_da_data *mpd, | 
|  | sector_t logical, long blk_cnt) | 
|  | { | 
|  | int nr_pages, i; | 
|  | pgoff_t index, end; | 
|  | struct pagevec pvec; | 
|  | struct inode *inode = mpd->inode; | 
|  | struct address_space *mapping = inode->i_mapping; | 
|  |  | 
|  | index = logical >> (PAGE_CACHE_SHIFT - inode->i_blkbits); | 
|  | end   = (logical + blk_cnt - 1) >> | 
|  | (PAGE_CACHE_SHIFT - inode->i_blkbits); | 
|  | while (index <= end) { | 
|  | nr_pages = pagevec_lookup(&pvec, mapping, index, PAGEVEC_SIZE); | 
|  | if (nr_pages == 0) | 
|  | break; | 
|  | for (i = 0; i < nr_pages; i++) { | 
|  | struct page *page = pvec.pages[i]; | 
|  | if (page->index > end) | 
|  | break; | 
|  | BUG_ON(!PageLocked(page)); | 
|  | BUG_ON(PageWriteback(page)); | 
|  | block_invalidatepage(page, 0); | 
|  | ClearPageUptodate(page); | 
|  | unlock_page(page); | 
|  | } | 
|  | index = pvec.pages[nr_pages - 1]->index + 1; | 
|  | pagevec_release(&pvec); | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | static void ext4_print_free_blocks(struct inode *inode) | 
|  | { | 
|  | struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | 
|  | printk(KERN_CRIT "Total free blocks count %lld\n", | 
|  | ext4_count_free_blocks(inode->i_sb)); | 
|  | printk(KERN_CRIT "Free/Dirty block details\n"); | 
|  | printk(KERN_CRIT "free_blocks=%lld\n", | 
|  | (long long) percpu_counter_sum(&sbi->s_freeblocks_counter)); | 
|  | printk(KERN_CRIT "dirty_blocks=%lld\n", | 
|  | (long long) percpu_counter_sum(&sbi->s_dirtyblocks_counter)); | 
|  | printk(KERN_CRIT "Block reservation details\n"); | 
|  | printk(KERN_CRIT "i_reserved_data_blocks=%u\n", | 
|  | EXT4_I(inode)->i_reserved_data_blocks); | 
|  | printk(KERN_CRIT "i_reserved_meta_blocks=%u\n", | 
|  | EXT4_I(inode)->i_reserved_meta_blocks); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * mpage_da_map_blocks - go through given space | 
|  | * | 
|  | * @mpd - bh describing space | 
|  | * | 
|  | * The function skips space we know is already mapped to disk blocks. | 
|  | * | 
|  | */ | 
|  | static int mpage_da_map_blocks(struct mpage_da_data *mpd) | 
|  | { | 
|  | int err, blks, get_blocks_flags; | 
|  | struct buffer_head new; | 
|  | sector_t next = mpd->b_blocknr; | 
|  | unsigned max_blocks = mpd->b_size >> mpd->inode->i_blkbits; | 
|  | loff_t disksize = EXT4_I(mpd->inode)->i_disksize; | 
|  | handle_t *handle = NULL; | 
|  |  | 
|  | /* | 
|  | * We consider only non-mapped and non-allocated blocks | 
|  | */ | 
|  | if ((mpd->b_state  & (1 << BH_Mapped)) && | 
|  | !(mpd->b_state & (1 << BH_Delay)) && | 
|  | !(mpd->b_state & (1 << BH_Unwritten))) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * If we didn't accumulate anything to write simply return | 
|  | */ | 
|  | if (!mpd->b_size) | 
|  | return 0; | 
|  |  | 
|  | handle = ext4_journal_current_handle(); | 
|  | BUG_ON(!handle); | 
|  |  | 
|  | /* | 
|  | * Call ext4_get_blocks() to allocate any delayed allocation | 
|  | * blocks, or to convert an uninitialized extent to be | 
|  | * initialized (in the case where we have written into | 
|  | * one or more preallocated blocks). | 
|  | * | 
|  | * We pass in the magic EXT4_GET_BLOCKS_DELALLOC_RESERVE to | 
|  | * indicate that we are on the delayed allocation path.  This | 
|  | * affects functions in many different parts of the allocation | 
|  | * call path.  This flag exists primarily because we don't | 
|  | * want to change *many* call functions, so ext4_get_blocks() | 
|  | * will set the magic i_delalloc_reserved_flag once the | 
|  | * inode's allocation semaphore is taken. | 
|  | * | 
|  | * If the blocks in questions were delalloc blocks, set | 
|  | * EXT4_GET_BLOCKS_DELALLOC_RESERVE so the delalloc accounting | 
|  | * variables are updated after the blocks have been allocated. | 
|  | */ | 
|  | new.b_state = 0; | 
|  | get_blocks_flags = EXT4_GET_BLOCKS_CREATE; | 
|  | if (ext4_should_dioread_nolock(mpd->inode)) | 
|  | get_blocks_flags |= EXT4_GET_BLOCKS_IO_CREATE_EXT; | 
|  | if (mpd->b_state & (1 << BH_Delay)) | 
|  | get_blocks_flags |= EXT4_GET_BLOCKS_DELALLOC_RESERVE; | 
|  |  | 
|  | blks = ext4_get_blocks(handle, mpd->inode, next, max_blocks, | 
|  | &new, get_blocks_flags); | 
|  | if (blks < 0) { | 
|  | err = blks; | 
|  | /* | 
|  | * If get block returns with error we simply | 
|  | * return. Later writepage will redirty the page and | 
|  | * writepages will find the dirty page again | 
|  | */ | 
|  | if (err == -EAGAIN) | 
|  | return 0; | 
|  |  | 
|  | if (err == -ENOSPC && | 
|  | ext4_count_free_blocks(mpd->inode->i_sb)) { | 
|  | mpd->retval = err; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * get block failure will cause us to loop in | 
|  | * writepages, because a_ops->writepage won't be able | 
|  | * to make progress. The page will be redirtied by | 
|  | * writepage and writepages will again try to write | 
|  | * the same. | 
|  | */ | 
|  | ext4_msg(mpd->inode->i_sb, KERN_CRIT, | 
|  | "delayed block allocation failed for inode %lu at " | 
|  | "logical offset %llu with max blocks %zd with " | 
|  | "error %d\n", mpd->inode->i_ino, | 
|  | (unsigned long long) next, | 
|  | mpd->b_size >> mpd->inode->i_blkbits, err); | 
|  | printk(KERN_CRIT "This should not happen!!  " | 
|  | "Data will be lost\n"); | 
|  | if (err == -ENOSPC) { | 
|  | ext4_print_free_blocks(mpd->inode); | 
|  | } | 
|  | /* invalidate all the pages */ | 
|  | ext4_da_block_invalidatepages(mpd, next, | 
|  | mpd->b_size >> mpd->inode->i_blkbits); | 
|  | return err; | 
|  | } | 
|  | BUG_ON(blks == 0); | 
|  |  | 
|  | new.b_size = (blks << mpd->inode->i_blkbits); | 
|  |  | 
|  | if (buffer_new(&new)) | 
|  | __unmap_underlying_blocks(mpd->inode, &new); | 
|  |  | 
|  | /* | 
|  | * If blocks are delayed marked, we need to | 
|  | * put actual blocknr and drop delayed bit | 
|  | */ | 
|  | if ((mpd->b_state & (1 << BH_Delay)) || | 
|  | (mpd->b_state & (1 << BH_Unwritten))) | 
|  | mpage_put_bnr_to_bhs(mpd, next, &new); | 
|  |  | 
|  | if (ext4_should_order_data(mpd->inode)) { | 
|  | err = ext4_jbd2_file_inode(handle, mpd->inode); | 
|  | if (err) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Update on-disk size along with block allocation. | 
|  | */ | 
|  | disksize = ((loff_t) next + blks) << mpd->inode->i_blkbits; | 
|  | if (disksize > i_size_read(mpd->inode)) | 
|  | disksize = i_size_read(mpd->inode); | 
|  | if (disksize > EXT4_I(mpd->inode)->i_disksize) { | 
|  | ext4_update_i_disksize(mpd->inode, disksize); | 
|  | return ext4_mark_inode_dirty(handle, mpd->inode); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define BH_FLAGS ((1 << BH_Uptodate) | (1 << BH_Mapped) | \ | 
|  | (1 << BH_Delay) | (1 << BH_Unwritten)) | 
|  |  | 
|  | /* | 
|  | * mpage_add_bh_to_extent - try to add one more block to extent of blocks | 
|  | * | 
|  | * @mpd->lbh - extent of blocks | 
|  | * @logical - logical number of the block in the file | 
|  | * @bh - bh of the block (used to access block's state) | 
|  | * | 
|  | * the function is used to collect contig. blocks in same state | 
|  | */ | 
|  | static void mpage_add_bh_to_extent(struct mpage_da_data *mpd, | 
|  | sector_t logical, size_t b_size, | 
|  | unsigned long b_state) | 
|  | { | 
|  | sector_t next; | 
|  | int nrblocks = mpd->b_size >> mpd->inode->i_blkbits; | 
|  |  | 
|  | /* check if thereserved journal credits might overflow */ | 
|  | if (!(EXT4_I(mpd->inode)->i_flags & EXT4_EXTENTS_FL)) { | 
|  | if (nrblocks >= EXT4_MAX_TRANS_DATA) { | 
|  | /* | 
|  | * With non-extent format we are limited by the journal | 
|  | * credit available.  Total credit needed to insert | 
|  | * nrblocks contiguous blocks is dependent on the | 
|  | * nrblocks.  So limit nrblocks. | 
|  | */ | 
|  | goto flush_it; | 
|  | } else if ((nrblocks + (b_size >> mpd->inode->i_blkbits)) > | 
|  | EXT4_MAX_TRANS_DATA) { | 
|  | /* | 
|  | * Adding the new buffer_head would make it cross the | 
|  | * allowed limit for which we have journal credit | 
|  | * reserved. So limit the new bh->b_size | 
|  | */ | 
|  | b_size = (EXT4_MAX_TRANS_DATA - nrblocks) << | 
|  | mpd->inode->i_blkbits; | 
|  | /* we will do mpage_da_submit_io in the next loop */ | 
|  | } | 
|  | } | 
|  | /* | 
|  | * First block in the extent | 
|  | */ | 
|  | if (mpd->b_size == 0) { | 
|  | mpd->b_blocknr = logical; | 
|  | mpd->b_size = b_size; | 
|  | mpd->b_state = b_state & BH_FLAGS; | 
|  | return; | 
|  | } | 
|  |  | 
|  | next = mpd->b_blocknr + nrblocks; | 
|  | /* | 
|  | * Can we merge the block to our big extent? | 
|  | */ | 
|  | if (logical == next && (b_state & BH_FLAGS) == mpd->b_state) { | 
|  | mpd->b_size += b_size; | 
|  | return; | 
|  | } | 
|  |  | 
|  | flush_it: | 
|  | /* | 
|  | * We couldn't merge the block to our extent, so we | 
|  | * need to flush current  extent and start new one | 
|  | */ | 
|  | if (mpage_da_map_blocks(mpd) == 0) | 
|  | mpage_da_submit_io(mpd); | 
|  | mpd->io_done = 1; | 
|  | return; | 
|  | } | 
|  |  | 
|  | static int ext4_bh_delay_or_unwritten(handle_t *handle, struct buffer_head *bh) | 
|  | { | 
|  | return (buffer_delay(bh) || buffer_unwritten(bh)) && buffer_dirty(bh); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * __mpage_da_writepage - finds extent of pages and blocks | 
|  | * | 
|  | * @page: page to consider | 
|  | * @wbc: not used, we just follow rules | 
|  | * @data: context | 
|  | * | 
|  | * The function finds extents of pages and scan them for all blocks. | 
|  | */ | 
|  | static int __mpage_da_writepage(struct page *page, | 
|  | struct writeback_control *wbc, void *data) | 
|  | { | 
|  | struct mpage_da_data *mpd = data; | 
|  | struct inode *inode = mpd->inode; | 
|  | struct buffer_head *bh, *head; | 
|  | sector_t logical; | 
|  |  | 
|  | if (mpd->io_done) { | 
|  | /* | 
|  | * Rest of the page in the page_vec | 
|  | * redirty then and skip then. We will | 
|  | * try to write them again after | 
|  | * starting a new transaction | 
|  | */ | 
|  | redirty_page_for_writepage(wbc, page); | 
|  | unlock_page(page); | 
|  | return MPAGE_DA_EXTENT_TAIL; | 
|  | } | 
|  | /* | 
|  | * Can we merge this page to current extent? | 
|  | */ | 
|  | if (mpd->next_page != page->index) { | 
|  | /* | 
|  | * Nope, we can't. So, we map non-allocated blocks | 
|  | * and start IO on them using writepage() | 
|  | */ | 
|  | if (mpd->next_page != mpd->first_page) { | 
|  | if (mpage_da_map_blocks(mpd) == 0) | 
|  | mpage_da_submit_io(mpd); | 
|  | /* | 
|  | * skip rest of the page in the page_vec | 
|  | */ | 
|  | mpd->io_done = 1; | 
|  | redirty_page_for_writepage(wbc, page); | 
|  | unlock_page(page); | 
|  | return MPAGE_DA_EXTENT_TAIL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Start next extent of pages ... | 
|  | */ | 
|  | mpd->first_page = page->index; | 
|  |  | 
|  | /* | 
|  | * ... and blocks | 
|  | */ | 
|  | mpd->b_size = 0; | 
|  | mpd->b_state = 0; | 
|  | mpd->b_blocknr = 0; | 
|  | } | 
|  |  | 
|  | mpd->next_page = page->index + 1; | 
|  | logical = (sector_t) page->index << | 
|  | (PAGE_CACHE_SHIFT - inode->i_blkbits); | 
|  |  | 
|  | if (!page_has_buffers(page)) { | 
|  | mpage_add_bh_to_extent(mpd, logical, PAGE_CACHE_SIZE, | 
|  | (1 << BH_Dirty) | (1 << BH_Uptodate)); | 
|  | if (mpd->io_done) | 
|  | return MPAGE_DA_EXTENT_TAIL; | 
|  | } else { | 
|  | /* | 
|  | * Page with regular buffer heads, just add all dirty ones | 
|  | */ | 
|  | head = page_buffers(page); | 
|  | bh = head; | 
|  | do { | 
|  | BUG_ON(buffer_locked(bh)); | 
|  | /* | 
|  | * We need to try to allocate | 
|  | * unmapped blocks in the same page. | 
|  | * Otherwise we won't make progress | 
|  | * with the page in ext4_writepage | 
|  | */ | 
|  | if (ext4_bh_delay_or_unwritten(NULL, bh)) { | 
|  | mpage_add_bh_to_extent(mpd, logical, | 
|  | bh->b_size, | 
|  | bh->b_state); | 
|  | if (mpd->io_done) | 
|  | return MPAGE_DA_EXTENT_TAIL; | 
|  | } else if (buffer_dirty(bh) && (buffer_mapped(bh))) { | 
|  | /* | 
|  | * mapped dirty buffer. We need to update | 
|  | * the b_state because we look at | 
|  | * b_state in mpage_da_map_blocks. We don't | 
|  | * update b_size because if we find an | 
|  | * unmapped buffer_head later we need to | 
|  | * use the b_state flag of that buffer_head. | 
|  | */ | 
|  | if (mpd->b_size == 0) | 
|  | mpd->b_state = bh->b_state & BH_FLAGS; | 
|  | } | 
|  | logical++; | 
|  | } while ((bh = bh->b_this_page) != head); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is a special get_blocks_t callback which is used by | 
|  | * ext4_da_write_begin().  It will either return mapped block or | 
|  | * reserve space for a single block. | 
|  | * | 
|  | * For delayed buffer_head we have BH_Mapped, BH_New, BH_Delay set. | 
|  | * We also have b_blocknr = -1 and b_bdev initialized properly | 
|  | * | 
|  | * For unwritten buffer_head we have BH_Mapped, BH_New, BH_Unwritten set. | 
|  | * We also have b_blocknr = physicalblock mapping unwritten extent and b_bdev | 
|  | * initialized properly. | 
|  | */ | 
|  | static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock, | 
|  | struct buffer_head *bh_result, int create) | 
|  | { | 
|  | int ret = 0; | 
|  | sector_t invalid_block = ~((sector_t) 0xffff); | 
|  |  | 
|  | if (invalid_block < ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es)) | 
|  | invalid_block = ~0; | 
|  |  | 
|  | BUG_ON(create == 0); | 
|  | BUG_ON(bh_result->b_size != inode->i_sb->s_blocksize); | 
|  |  | 
|  | /* | 
|  | * first, we need to know whether the block is allocated already | 
|  | * preallocated blocks are unmapped but should treated | 
|  | * the same as allocated blocks. | 
|  | */ | 
|  | ret = ext4_get_blocks(NULL, inode, iblock, 1,  bh_result, 0); | 
|  | if ((ret == 0) && !buffer_delay(bh_result)) { | 
|  | /* the block isn't (pre)allocated yet, let's reserve space */ | 
|  | /* | 
|  | * XXX: __block_prepare_write() unmaps passed block, | 
|  | * is it OK? | 
|  | */ | 
|  | ret = ext4_da_reserve_space(inode, iblock); | 
|  | if (ret) | 
|  | /* not enough space to reserve */ | 
|  | return ret; | 
|  |  | 
|  | map_bh(bh_result, inode->i_sb, invalid_block); | 
|  | set_buffer_new(bh_result); | 
|  | set_buffer_delay(bh_result); | 
|  | } else if (ret > 0) { | 
|  | bh_result->b_size = (ret << inode->i_blkbits); | 
|  | if (buffer_unwritten(bh_result)) { | 
|  | /* A delayed write to unwritten bh should | 
|  | * be marked new and mapped.  Mapped ensures | 
|  | * that we don't do get_block multiple times | 
|  | * when we write to the same offset and new | 
|  | * ensures that we do proper zero out for | 
|  | * partial write. | 
|  | */ | 
|  | set_buffer_new(bh_result); | 
|  | set_buffer_mapped(bh_result); | 
|  | } | 
|  | ret = 0; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This function is used as a standard get_block_t calback function | 
|  | * when there is no desire to allocate any blocks.  It is used as a | 
|  | * callback function for block_prepare_write(), nobh_writepage(), and | 
|  | * block_write_full_page().  These functions should only try to map a | 
|  | * single block at a time. | 
|  | * | 
|  | * Since this function doesn't do block allocations even if the caller | 
|  | * requests it by passing in create=1, it is critically important that | 
|  | * any caller checks to make sure that any buffer heads are returned | 
|  | * by this function are either all already mapped or marked for | 
|  | * delayed allocation before calling nobh_writepage() or | 
|  | * block_write_full_page().  Otherwise, b_blocknr could be left | 
|  | * unitialized, and the page write functions will be taken by | 
|  | * surprise. | 
|  | */ | 
|  | static int noalloc_get_block_write(struct inode *inode, sector_t iblock, | 
|  | struct buffer_head *bh_result, int create) | 
|  | { | 
|  | int ret = 0; | 
|  | unsigned max_blocks = bh_result->b_size >> inode->i_blkbits; | 
|  |  | 
|  | BUG_ON(bh_result->b_size != inode->i_sb->s_blocksize); | 
|  |  | 
|  | /* | 
|  | * we don't want to do block allocation in writepage | 
|  | * so call get_block_wrap with create = 0 | 
|  | */ | 
|  | ret = ext4_get_blocks(NULL, inode, iblock, max_blocks, bh_result, 0); | 
|  | if (ret > 0) { | 
|  | bh_result->b_size = (ret << inode->i_blkbits); | 
|  | ret = 0; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int bget_one(handle_t *handle, struct buffer_head *bh) | 
|  | { | 
|  | get_bh(bh); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bput_one(handle_t *handle, struct buffer_head *bh) | 
|  | { | 
|  | put_bh(bh); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __ext4_journalled_writepage(struct page *page, | 
|  | unsigned int len) | 
|  | { | 
|  | struct address_space *mapping = page->mapping; | 
|  | struct inode *inode = mapping->host; | 
|  | struct buffer_head *page_bufs; | 
|  | handle_t *handle = NULL; | 
|  | int ret = 0; | 
|  | int err; | 
|  |  | 
|  | page_bufs = page_buffers(page); | 
|  | BUG_ON(!page_bufs); | 
|  | walk_page_buffers(handle, page_bufs, 0, len, NULL, bget_one); | 
|  | /* As soon as we unlock the page, it can go away, but we have | 
|  | * references to buffers so we are safe */ | 
|  | unlock_page(page); | 
|  |  | 
|  | handle = ext4_journal_start(inode, ext4_writepage_trans_blocks(inode)); | 
|  | if (IS_ERR(handle)) { | 
|  | ret = PTR_ERR(handle); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = walk_page_buffers(handle, page_bufs, 0, len, NULL, | 
|  | do_journal_get_write_access); | 
|  |  | 
|  | err = walk_page_buffers(handle, page_bufs, 0, len, NULL, | 
|  | write_end_fn); | 
|  | if (ret == 0) | 
|  | ret = err; | 
|  | err = ext4_journal_stop(handle); | 
|  | if (!ret) | 
|  | ret = err; | 
|  |  | 
|  | walk_page_buffers(handle, page_bufs, 0, len, NULL, bput_one); | 
|  | ext4_set_inode_state(inode, EXT4_STATE_JDATA); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ext4_set_bh_endio(struct buffer_head *bh, struct inode *inode); | 
|  | static void ext4_end_io_buffer_write(struct buffer_head *bh, int uptodate); | 
|  |  | 
|  | /* | 
|  | * Note that we don't need to start a transaction unless we're journaling data | 
|  | * because we should have holes filled from ext4_page_mkwrite(). We even don't | 
|  | * need to file the inode to the transaction's list in ordered mode because if | 
|  | * we are writing back data added by write(), the inode is already there and if | 
|  | * we are writing back data modified via mmap(), noone guarantees in which | 
|  | * transaction the data will hit the disk. In case we are journaling data, we | 
|  | * cannot start transaction directly because transaction start ranks above page | 
|  | * lock so we have to do some magic. | 
|  | * | 
|  | * This function can get called via... | 
|  | *   - ext4_da_writepages after taking page lock (have journal handle) | 
|  | *   - journal_submit_inode_data_buffers (no journal handle) | 
|  | *   - shrink_page_list via pdflush (no journal handle) | 
|  | *   - grab_page_cache when doing write_begin (have journal handle) | 
|  | * | 
|  | * We don't do any block allocation in this function. If we have page with | 
|  | * multiple blocks we need to write those buffer_heads that are mapped. This | 
|  | * is important for mmaped based write. So if we do with blocksize 1K | 
|  | * truncate(f, 1024); | 
|  | * a = mmap(f, 0, 4096); | 
|  | * a[0] = 'a'; | 
|  | * truncate(f, 4096); | 
|  | * we have in the page first buffer_head mapped via page_mkwrite call back | 
|  | * but other bufer_heads would be unmapped but dirty(dirty done via the | 
|  | * do_wp_page). So writepage should write the first block. If we modify | 
|  | * the mmap area beyond 1024 we will again get a page_fault and the | 
|  | * page_mkwrite callback will do the block allocation and mark the | 
|  | * buffer_heads mapped. | 
|  | * | 
|  | * We redirty the page if we have any buffer_heads that is either delay or | 
|  | * unwritten in the page. | 
|  | * | 
|  | * We can get recursively called as show below. | 
|  | * | 
|  | *	ext4_writepage() -> kmalloc() -> __alloc_pages() -> page_launder() -> | 
|  | *		ext4_writepage() | 
|  | * | 
|  | * But since we don't do any block allocation we should not deadlock. | 
|  | * Page also have the dirty flag cleared so we don't get recurive page_lock. | 
|  | */ | 
|  | static int ext4_writepage(struct page *page, | 
|  | struct writeback_control *wbc) | 
|  | { | 
|  | int ret = 0; | 
|  | loff_t size; | 
|  | unsigned int len; | 
|  | struct buffer_head *page_bufs = NULL; | 
|  | struct inode *inode = page->mapping->host; | 
|  |  | 
|  | trace_ext4_writepage(inode, page); | 
|  | size = i_size_read(inode); | 
|  | if (page->index == size >> PAGE_CACHE_SHIFT) | 
|  | len = size & ~PAGE_CACHE_MASK; | 
|  | else | 
|  | len = PAGE_CACHE_SIZE; | 
|  |  | 
|  | if (page_has_buffers(page)) { | 
|  | page_bufs = page_buffers(page); | 
|  | if (walk_page_buffers(NULL, page_bufs, 0, len, NULL, | 
|  | ext4_bh_delay_or_unwritten)) { | 
|  | /* | 
|  | * We don't want to do  block allocation | 
|  | * So redirty the page and return | 
|  | * We may reach here when we do a journal commit | 
|  | * via journal_submit_inode_data_buffers. | 
|  | * If we don't have mapping block we just ignore | 
|  | * them. We can also reach here via shrink_page_list | 
|  | */ | 
|  | redirty_page_for_writepage(wbc, page); | 
|  | unlock_page(page); | 
|  | return 0; | 
|  | } | 
|  | } else { | 
|  | /* | 
|  | * The test for page_has_buffers() is subtle: | 
|  | * We know the page is dirty but it lost buffers. That means | 
|  | * that at some moment in time after write_begin()/write_end() | 
|  | * has been called all buffers have been clean and thus they | 
|  | * must have been written at least once. So they are all | 
|  | * mapped and we can happily proceed with mapping them | 
|  | * and writing the page. | 
|  | * | 
|  | * Try to initialize the buffer_heads and check whether | 
|  | * all are mapped and non delay. We don't want to | 
|  | * do block allocation here. | 
|  | */ | 
|  | ret = block_prepare_write(page, 0, len, | 
|  | noalloc_get_block_write); | 
|  | if (!ret) { | 
|  | page_bufs = page_buffers(page); | 
|  | /* check whether all are mapped and non delay */ | 
|  | if (walk_page_buffers(NULL, page_bufs, 0, len, NULL, | 
|  | ext4_bh_delay_or_unwritten)) { | 
|  | redirty_page_for_writepage(wbc, page); | 
|  | unlock_page(page); | 
|  | return 0; | 
|  | } | 
|  | } else { | 
|  | /* | 
|  | * We can't do block allocation here | 
|  | * so just redity the page and unlock | 
|  | * and return | 
|  | */ | 
|  | redirty_page_for_writepage(wbc, page); | 
|  | unlock_page(page); | 
|  | return 0; | 
|  | } | 
|  | /* now mark the buffer_heads as dirty and uptodate */ | 
|  | block_commit_write(page, 0, len); | 
|  | } | 
|  |  | 
|  | if (PageChecked(page) && ext4_should_journal_data(inode)) { | 
|  | /* | 
|  | * It's mmapped pagecache.  Add buffers and journal it.  There | 
|  | * doesn't seem much point in redirtying the page here. | 
|  | */ | 
|  | ClearPageChecked(page); | 
|  | return __ext4_journalled_writepage(page, len); | 
|  | } | 
|  |  | 
|  | if (test_opt(inode->i_sb, NOBH) && ext4_should_writeback_data(inode)) | 
|  | ret = nobh_writepage(page, noalloc_get_block_write, wbc); | 
|  | else if (page_bufs && buffer_uninit(page_bufs)) { | 
|  | ext4_set_bh_endio(page_bufs, inode); | 
|  | ret = block_write_full_page_endio(page, noalloc_get_block_write, | 
|  | wbc, ext4_end_io_buffer_write); | 
|  | } else | 
|  | ret = block_write_full_page(page, noalloc_get_block_write, | 
|  | wbc); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is called via ext4_da_writepages() to | 
|  | * calulate the total number of credits to reserve to fit | 
|  | * a single extent allocation into a single transaction, | 
|  | * ext4_da_writpeages() will loop calling this before | 
|  | * the block allocation. | 
|  | */ | 
|  |  | 
|  | static int ext4_da_writepages_trans_blocks(struct inode *inode) | 
|  | { | 
|  | int max_blocks = EXT4_I(inode)->i_reserved_data_blocks; | 
|  |  | 
|  | /* | 
|  | * With non-extent format the journal credit needed to | 
|  | * insert nrblocks contiguous block is dependent on | 
|  | * number of contiguous block. So we will limit | 
|  | * number of contiguous block to a sane value | 
|  | */ | 
|  | if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) && | 
|  | (max_blocks > EXT4_MAX_TRANS_DATA)) | 
|  | max_blocks = EXT4_MAX_TRANS_DATA; | 
|  |  | 
|  | return ext4_chunk_trans_blocks(inode, max_blocks); | 
|  | } | 
|  |  | 
|  | static int ext4_da_writepages(struct address_space *mapping, | 
|  | struct writeback_control *wbc) | 
|  | { | 
|  | pgoff_t	index; | 
|  | int range_whole = 0; | 
|  | handle_t *handle = NULL; | 
|  | struct mpage_da_data mpd; | 
|  | struct inode *inode = mapping->host; | 
|  | int no_nrwrite_index_update; | 
|  | int pages_written = 0; | 
|  | long pages_skipped; | 
|  | unsigned int max_pages; | 
|  | int range_cyclic, cycled = 1, io_done = 0; | 
|  | int needed_blocks, ret = 0; | 
|  | long desired_nr_to_write, nr_to_writebump = 0; | 
|  | loff_t range_start = wbc->range_start; | 
|  | struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb); | 
|  |  | 
|  | trace_ext4_da_writepages(inode, wbc); | 
|  |  | 
|  | /* | 
|  | * No pages to write? This is mainly a kludge to avoid starting | 
|  | * a transaction for special inodes like journal inode on last iput() | 
|  | * because that could violate lock ordering on umount | 
|  | */ | 
|  | if (!mapping->nrpages || !mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * If the filesystem has aborted, it is read-only, so return | 
|  | * right away instead of dumping stack traces later on that | 
|  | * will obscure the real source of the problem.  We test | 
|  | * EXT4_MF_FS_ABORTED instead of sb->s_flag's MS_RDONLY because | 
|  | * the latter could be true if the filesystem is mounted | 
|  | * read-only, and in that case, ext4_da_writepages should | 
|  | * *never* be called, so if that ever happens, we would want | 
|  | * the stack trace. | 
|  | */ | 
|  | if (unlikely(sbi->s_mount_flags & EXT4_MF_FS_ABORTED)) | 
|  | return -EROFS; | 
|  |  | 
|  | if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX) | 
|  | range_whole = 1; | 
|  |  | 
|  | range_cyclic = wbc->range_cyclic; | 
|  | if (wbc->range_cyclic) { | 
|  | index = mapping->writeback_index; | 
|  | if (index) | 
|  | cycled = 0; | 
|  | wbc->range_start = index << PAGE_CACHE_SHIFT; | 
|  | wbc->range_end  = LLONG_MAX; | 
|  | wbc->range_cyclic = 0; | 
|  | } else | 
|  | index = wbc->range_start >> PAGE_CACHE_SHIFT; | 
|  |  | 
|  | /* | 
|  | * This works around two forms of stupidity.  The first is in | 
|  | * the writeback code, which caps the maximum number of pages | 
|  | * written to be 1024 pages.  This is wrong on multiple | 
|  | * levels; different architectues have a different page size, | 
|  | * which changes the maximum amount of data which gets | 
|  | * written.  Secondly, 4 megabytes is way too small.  XFS | 
|  | * forces this value to be 16 megabytes by multiplying | 
|  | * nr_to_write parameter by four, and then relies on its | 
|  | * allocator to allocate larger extents to make them | 
|  | * contiguous.  Unfortunately this brings us to the second | 
|  | * stupidity, which is that ext4's mballoc code only allocates | 
|  | * at most 2048 blocks.  So we force contiguous writes up to | 
|  | * the number of dirty blocks in the inode, or | 
|  | * sbi->max_writeback_mb_bump whichever is smaller. | 
|  | */ | 
|  | max_pages = sbi->s_max_writeback_mb_bump << (20 - PAGE_CACHE_SHIFT); | 
|  | if (!range_cyclic && range_whole) | 
|  | desired_nr_to_write = wbc->nr_to_write * 8; | 
|  | else | 
|  | desired_nr_to_write = ext4_num_dirty_pages(inode, index, | 
|  | max_pages); | 
|  | if (desired_nr_to_write > max_pages) | 
|  | desired_nr_to_write = max_pages; | 
|  |  | 
|  | if (wbc->nr_to_write < desired_nr_to_write) { | 
|  | nr_to_writebump = desired_nr_to_write - wbc->nr_to_write; | 
|  | wbc->nr_to_write = desired_nr_to_write; | 
|  | } | 
|  |  | 
|  | mpd.wbc = wbc; | 
|  | mpd.inode = mapping->host; | 
|  |  | 
|  | /* | 
|  | * we don't want write_cache_pages to update | 
|  | * nr_to_write and writeback_index | 
|  | */ | 
|  | no_nrwrite_index_update = wbc->no_nrwrite_index_update; | 
|  | wbc->no_nrwrite_index_update = 1; | 
|  | pages_skipped = wbc->pages_skipped; | 
|  |  | 
|  | retry: | 
|  | while (!ret && wbc->nr_to_write > 0) { | 
|  |  | 
|  | /* | 
|  | * we  insert one extent at a time. So we need | 
|  | * credit needed for single extent allocation. | 
|  | * journalled mode is currently not supported | 
|  | * by delalloc | 
|  | */ | 
|  | BUG_ON(ext4_should_journal_data(inode)); | 
|  | needed_blocks = ext4_da_writepages_trans_blocks(inode); | 
|  |  | 
|  | /* start a new transaction*/ | 
|  | handle = ext4_journal_start(inode, needed_blocks); | 
|  | if (IS_ERR(handle)) { | 
|  | ret = PTR_ERR(handle); | 
|  | ext4_msg(inode->i_sb, KERN_CRIT, "%s: jbd2_start: " | 
|  | "%ld pages, ino %lu; err %d\n", __func__, | 
|  | wbc->nr_to_write, inode->i_ino, ret); | 
|  | goto out_writepages; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Now call __mpage_da_writepage to find the next | 
|  | * contiguous region of logical blocks that need | 
|  | * blocks to be allocated by ext4.  We don't actually | 
|  | * submit the blocks for I/O here, even though | 
|  | * write_cache_pages thinks it will, and will set the | 
|  | * pages as clean for write before calling | 
|  | * __mpage_da_writepage(). | 
|  | */ | 
|  | mpd.b_size = 0; | 
|  | mpd.b_state = 0; | 
|  | mpd.b_blocknr = 0; | 
|  | mpd.first_page = 0; | 
|  | mpd.next_page = 0; | 
|  | mpd.io_done = 0; | 
|  | mpd.pages_written = 0; | 
|  | mpd.retval = 0; | 
|  | ret = write_cache_pages(mapping, wbc, __mpage_da_writepage, | 
|  | &mpd); | 
|  | /* | 
|  | * If we have a contiguous extent of pages and we | 
|  | * haven't done the I/O yet, map the blocks and submit | 
|  | * them for I/O. | 
|  | */ | 
|  | if (!mpd.io_done && mpd.next_page != mpd.first_page) { | 
|  | if (mpage_da_map_blocks(&mpd) == 0) | 
|  | mpage_da_submit_io(&mpd); | 
|  | mpd.io_done = 1; | 
|  | ret = MPAGE_DA_EXTENT_TAIL; | 
|  | } | 
|  | trace_ext4_da_write_pages(inode, &mpd); | 
|  | wbc->nr_to_write -= mpd.pages_written; | 
|  |  | 
|  | ext4_journal_stop(handle); | 
|  |  | 
|  | if ((mpd.retval == -ENOSPC) && sbi->s_journal) { | 
|  | /* commit the transaction which would | 
|  | * free blocks released in the transaction | 
|  | * and try again | 
|  | */ | 
|  | jbd2_journal_force_commit_nested(sbi->s_journal); | 
|  | wbc->pages_skipped = pages_skipped; | 
|  | ret = 0; | 
|  | } else if (ret == MPAGE_DA_EXTENT_TAIL) { | 
|  | /* | 
|  | * got one extent now try with | 
|  | * rest of the pages | 
|  | */ | 
|  | pages_written += mpd.pages_written; | 
|  | wbc->pages_skipped = pages_skipped; | 
|  | ret = 0; | 
|  | io_done = 1; | 
|  | } else if (wbc->nr_to_write) | 
|  | /* | 
|  | * There is no more writeout needed | 
|  | * or we requested for a noblocking writeout | 
|  | * and we found the device congested | 
|  | */ | 
|  | break; | 
|  | } | 
|  | if (!io_done && !cycled) { | 
|  | cycled = 1; | 
|  | index = 0; | 
|  | wbc->range_start = index << PAGE_CACHE_SHIFT; | 
|  | wbc->range_end  = mapping->writeback_index - 1; | 
|  | goto retry; | 
|  | } | 
|  | if (pages_skipped != wbc->pages_skipped) | 
|  | ext4_msg(inode->i_sb, KERN_CRIT, | 
|  | "This should not happen leaving %s " | 
|  | "with nr_to_write = %ld ret = %d\n", | 
|  | __func__, wbc->nr_to_write, ret); | 
|  |  | 
|  | /* Update index */ | 
|  | index += pages_written; | 
|  | wbc->range_cyclic = range_cyclic; | 
|  | if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0)) | 
|  | /* | 
|  | * set the writeback_index so that range_cyclic | 
|  | * mode will write it back later | 
|  | */ | 
|  | mapping->writeback_index = index; | 
|  |  | 
|  | out_writepages: | 
|  | if (!no_nrwrite_index_update) | 
|  | wbc->no_nrwrite_index_update = 0; | 
|  | wbc->nr_to_write -= nr_to_writebump; | 
|  | wbc->range_start = range_start; | 
|  | trace_ext4_da_writepages_result(inode, wbc, ret, pages_written); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #define FALL_BACK_TO_NONDELALLOC 1 | 
|  | static int ext4_nonda_switch(struct super_block *sb) | 
|  | { | 
|  | s64 free_blocks, dirty_blocks; | 
|  | struct ext4_sb_info *sbi = EXT4_SB(sb); | 
|  |  | 
|  | /* | 
|  | * switch to non delalloc mode if we are running low | 
|  | * on free block. The free block accounting via percpu | 
|  | * counters can get slightly wrong with percpu_counter_batch getting | 
|  | * accumulated on each CPU without updating global counters | 
|  | * Delalloc need an accurate free block accounting. So switch | 
|  | * to non delalloc when we are near to error range. | 
|  | */ | 
|  | free_blocks  = percpu_counter_read_positive(&sbi->s_freeblocks_counter); | 
|  | dirty_blocks = percpu_counter_read_positive(&sbi->s_dirtyblocks_counter); | 
|  | if (2 * free_blocks < 3 * dirty_blocks || | 
|  | free_blocks < (dirty_blocks + EXT4_FREEBLOCKS_WATERMARK)) { | 
|  | /* | 
|  | * free block count is less than 150% of dirty blocks | 
|  | * or free blocks is less than watermark | 
|  | */ | 
|  | return 1; | 
|  | } | 
|  | /* | 
|  | * Even if we don't switch but are nearing capacity, | 
|  | * start pushing delalloc when 1/2 of free blocks are dirty. | 
|  | */ | 
|  | if (free_blocks < 2 * dirty_blocks) | 
|  | writeback_inodes_sb_if_idle(sb); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ext4_da_write_begin(struct file *file, struct address_space *mapping, | 
|  | loff_t pos, unsigned len, unsigned flags, | 
|  | struct page **pagep, void **fsdata) | 
|  | { | 
|  | int ret, retries = 0, quota_retries = 0; | 
|  | struct page *page; | 
|  | pgoff_t index; | 
|  | unsigned from, to; | 
|  | struct inode *inode = mapping->host; | 
|  | handle_t *handle; | 
|  |  | 
|  | index = pos >> PAGE_CACHE_SHIFT; | 
|  | from = pos & (PAGE_CACHE_SIZE - 1); | 
|  | to = from + len; | 
|  |  | 
|  | if (ext4_nonda_switch(inode->i_sb)) { | 
|  | *fsdata = (void *)FALL_BACK_TO_NONDELALLOC; | 
|  | return ext4_write_begin(file, mapping, pos, | 
|  | len, flags, pagep, fsdata); | 
|  | } | 
|  | *fsdata = (void *)0; | 
|  | trace_ext4_da_write_begin(inode, pos, len, flags); | 
|  | retry: | 
|  | /* | 
|  | * With delayed allocation, we don't log the i_disksize update | 
|  | * if there is delayed block allocation. But we still need | 
|  | * to journalling the i_disksize update if writes to the end | 
|  | * of file which has an already mapped buffer. | 
|  | */ | 
|  | handle = ext4_journal_start(inode, 1); | 
|  | if (IS_ERR(handle)) { | 
|  | ret = PTR_ERR(handle); | 
|  | goto out; | 
|  | } | 
|  | /* We cannot recurse into the filesystem as the transaction is already | 
|  | * started */ | 
|  | flags |= AOP_FLAG_NOFS; | 
|  |  | 
|  | page = grab_cache_page_write_begin(mapping, index, flags); | 
|  | if (!page) { | 
|  | ext4_journal_stop(handle); | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  | *pagep = page; | 
|  |  | 
|  | ret = block_write_begin(file, mapping, pos, len, flags, pagep, fsdata, | 
|  | ext4_da_get_block_prep); | 
|  | if (ret < 0) { | 
|  | unlock_page(page); | 
|  | ext4_journal_stop(handle); | 
|  | page_cache_release(page); | 
|  | /* | 
|  | * block_write_begin may have instantiated a few blocks | 
|  | * outside i_size.  Trim these off again. Don't need | 
|  | * i_size_read because we hold i_mutex. | 
|  | */ | 
|  | if (pos + len > inode->i_size) | 
|  | ext4_truncate_failed_write(inode); | 
|  | } | 
|  |  | 
|  | if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) | 
|  | goto retry; | 
|  |  | 
|  | if ((ret == -EDQUOT) && | 
|  | EXT4_I(inode)->i_reserved_meta_blocks && | 
|  | (quota_retries++ < 3)) { | 
|  | /* | 
|  | * Since we often over-estimate the number of meta | 
|  | * data blocks required, we may sometimes get a | 
|  | * spurios out of quota error even though there would | 
|  | * be enough space once we write the data blocks and | 
|  | * find out how many meta data blocks were _really_ | 
|  | * required.  So try forcing the inode write to see if | 
|  | * that helps. | 
|  | */ | 
|  | write_inode_now(inode, (quota_retries == 3)); | 
|  | goto retry; | 
|  | } | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check if we should update i_disksize | 
|  | * when write to the end of file but not require block allocation | 
|  | */ | 
|  | static int ext4_da_should_update_i_disksize(struct page *page, | 
|  | unsigned long offset) | 
|  | { | 
|  | struct buffer_head *bh; | 
|  | struct inode *inode = page->mapping->host; | 
|  | unsigned int idx; | 
|  | int i; | 
|  |  | 
|  | bh = page_buffers(page); | 
|  | idx = offset >> inode->i_blkbits; | 
|  |  | 
|  | for (i = 0; i < idx; i++) | 
|  | bh = bh->b_this_page; | 
|  |  | 
|  | if (!buffer_mapped(bh) || (buffer_delay(bh)) || buffer_unwritten(bh)) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int ext4_da_write_end(struct file *file, | 
|  | struct address_space *mapping, | 
|  | loff_t pos, unsigned len, unsigned copied, | 
|  | struct page *page, void *fsdata) | 
|  | { | 
|  | struct inode *inode = mapping->host; | 
|  | int ret = 0, ret2; | 
|  | handle_t *handle = ext4_journal_current_handle(); | 
|  | loff_t new_i_size; | 
|  | unsigned long start, end; | 
|  | int write_mode = (int)(unsigned long)fsdata; | 
|  |  | 
|  | if (write_mode == FALL_BACK_TO_NONDELALLOC) { | 
|  | if (ext4_should_order_data(inode)) { | 
|  | return ext4_ordered_write_end(file, mapping, pos, | 
|  | len, copied, page, fsdata); | 
|  | } else if (ext4_should_writeback_data(inode)) { | 
|  | return ext4_writeback_write_end(file, mapping, pos, | 
|  | len, copied, page, fsdata); | 
|  | } else { | 
|  | BUG(); | 
|  | } | 
|  | } | 
|  |  | 
|  | trace_ext4_da_write_end(inode, pos, len, copied); | 
|  | start = pos & (PAGE_CACHE_SIZE - 1); | 
|  | end = start + copied - 1; | 
|  |  | 
|  | /* | 
|  | * generic_write_end() will run mark_inode_dirty() if i_size | 
|  | * changes.  So let's piggyback the i_disksize mark_inode_dirty | 
|  | * into that. | 
|  | */ | 
|  |  | 
|  | new_i_size = pos + copied; | 
|  | if (new_i_size > EXT4_I(inode)->i_disksize) { | 
|  | if (ext4_da_should_update_i_disksize(page, end)) { | 
|  | down_write(&EXT4_I(inode)->i_data_sem); | 
|  | if (new_i_size > EXT4_I(inode)->i_disksize) { | 
|  | /* | 
|  | * Updating i_disksize when extending file | 
|  | * without needing block allocation | 
|  | */ | 
|  | if (ext4_should_order_data(inode)) | 
|  | ret = ext4_jbd2_file_inode(handle, | 
|  | inode); | 
|  |  | 
|  | EXT4_I(inode)->i_disksize = new_i_size; | 
|  | } | 
|  | up_write(&EXT4_I(inode)->i_data_sem); | 
|  | /* We need to mark inode dirty even if | 
|  | * new_i_size is less that inode->i_size | 
|  | * bu greater than i_disksize.(hint delalloc) | 
|  | */ | 
|  | ext4_mark_inode_dirty(handle, inode); | 
|  | } | 
|  | } | 
|  | ret2 = generic_write_end(file, mapping, pos, len, copied, | 
|  | page, fsdata); | 
|  | copied = ret2; | 
|  | if (ret2 < 0) | 
|  | ret = ret2; | 
|  | ret2 = ext4_journal_stop(handle); | 
|  | if (!ret) | 
|  | ret = ret2; | 
|  |  | 
|  | return ret ? ret : copied; | 
|  | } | 
|  |  | 
|  | static void ext4_da_invalidatepage(struct page *page, unsigned long offset) | 
|  | { | 
|  | /* | 
|  | * Drop reserved blocks | 
|  | */ | 
|  | BUG_ON(!PageLocked(page)); | 
|  | if (!page_has_buffers(page)) | 
|  | goto out; | 
|  |  | 
|  | ext4_da_page_release_reservation(page, offset); | 
|  |  | 
|  | out: | 
|  | ext4_invalidatepage(page, offset); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Force all delayed allocation blocks to be allocated for a given inode. | 
|  | */ | 
|  | int ext4_alloc_da_blocks(struct inode *inode) | 
|  | { | 
|  | trace_ext4_alloc_da_blocks(inode); | 
|  |  | 
|  | if (!EXT4_I(inode)->i_reserved_data_blocks && | 
|  | !EXT4_I(inode)->i_reserved_meta_blocks) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * We do something simple for now.  The filemap_flush() will | 
|  | * also start triggering a write of the data blocks, which is | 
|  | * not strictly speaking necessary (and for users of | 
|  | * laptop_mode, not even desirable).  However, to do otherwise | 
|  | * would require replicating code paths in: | 
|  | * | 
|  | * ext4_da_writepages() -> | 
|  | *    write_cache_pages() ---> (via passed in callback function) | 
|  | *        __mpage_da_writepage() --> | 
|  | *           mpage_add_bh_to_extent() | 
|  | *           mpage_da_map_blocks() | 
|  | * | 
|  | * The problem is that write_cache_pages(), located in | 
|  | * mm/page-writeback.c, marks pages clean in preparation for | 
|  | * doing I/O, which is not desirable if we're not planning on | 
|  | * doing I/O at all. | 
|  | * | 
|  | * We could call write_cache_pages(), and then redirty all of | 
|  | * the pages by calling redirty_page_for_writeback() but that | 
|  | * would be ugly in the extreme.  So instead we would need to | 
|  | * replicate parts of the code in the above functions, | 
|  | * simplifying them becuase we wouldn't actually intend to | 
|  | * write out the pages, but rather only collect contiguous | 
|  | * logical block extents, call the multi-block allocator, and | 
|  | * then update the buffer heads with the block allocations. | 
|  | * | 
|  | * For now, though, we'll cheat by calling filemap_flush(), | 
|  | * which will map the blocks, and start the I/O, but not | 
|  | * actually wait for the I/O to complete. | 
|  | */ | 
|  | return filemap_flush(inode->i_mapping); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * bmap() is special.  It gets used by applications such as lilo and by | 
|  | * the swapper to find the on-disk block of a specific piece of data. | 
|  | * | 
|  | * Naturally, this is dangerous if the block concerned is still in the | 
|  | * journal.  If somebody makes a swapfile on an ext4 data-journaling | 
|  | * filesystem and enables swap, then they may get a nasty shock when the | 
|  | * data getting swapped to that swapfile suddenly gets overwritten by | 
|  | * the original zero's written out previously to the journal and | 
|  | * awaiting writeback in the kernel's buffer cache. | 
|  | * | 
|  | * So, if we see any bmap calls here on a modified, data-journaled file, | 
|  | * take extra steps to flush any blocks which might be in the cache. | 
|  | */ | 
|  | static sector_t ext4_bmap(struct address_space *mapping, sector_t block) | 
|  | { | 
|  | struct inode *inode = mapping->host; | 
|  | journal_t *journal; | 
|  | int err; | 
|  |  | 
|  | if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY) && | 
|  | test_opt(inode->i_sb, DELALLOC)) { | 
|  | /* | 
|  | * With delalloc we want to sync the file | 
|  | * so that we can make sure we allocate | 
|  | * blocks for file | 
|  | */ | 
|  | filemap_write_and_wait(mapping); | 
|  | } | 
|  |  | 
|  | if (EXT4_JOURNAL(inode) && | 
|  | ext4_test_inode_state(inode, EXT4_STATE_JDATA)) { | 
|  | /* | 
|  | * This is a REALLY heavyweight approach, but the use of | 
|  | * bmap on dirty files is expected to be extremely rare: | 
|  | * only if we run lilo or swapon on a freshly made file | 
|  | * do we expect this to happen. | 
|  | * | 
|  | * (bmap requires CAP_SYS_RAWIO so this does not | 
|  | * represent an unprivileged user DOS attack --- we'd be | 
|  | * in trouble if mortal users could trigger this path at | 
|  | * will.) | 
|  | * | 
|  | * NB. EXT4_STATE_JDATA is not set on files other than | 
|  | * regular files.  If somebody wants to bmap a directory | 
|  | * or symlink and gets confused because the buffer | 
|  | * hasn't yet been flushed to disk, they deserve | 
|  | * everything they get. | 
|  | */ | 
|  |  | 
|  | ext4_clear_inode_state(inode, EXT4_STATE_JDATA); | 
|  | journal = EXT4_JOURNAL(inode); | 
|  | jbd2_journal_lock_updates(journal); | 
|  | err = jbd2_journal_flush(journal); | 
|  | jbd2_journal_unlock_updates(journal); | 
|  |  | 
|  | if (err) | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | return generic_block_bmap(mapping, block, ext4_get_block); | 
|  | } | 
|  |  | 
|  | static int ext4_readpage(struct file *file, struct page *page) | 
|  | { | 
|  | return mpage_readpage(page, ext4_get_block); | 
|  | } | 
|  |  | 
|  | static int | 
|  | ext4_readpages(struct file *file, struct address_space *mapping, | 
|  | struct list_head *pages, unsigned nr_pages) | 
|  | { | 
|  | return mpage_readpages(mapping, pages, nr_pages, ext4_get_block); | 
|  | } | 
|  |  | 
|  | static void ext4_free_io_end(ext4_io_end_t *io) | 
|  | { | 
|  | BUG_ON(!io); | 
|  | if (io->page) | 
|  | put_page(io->page); | 
|  | iput(io->inode); | 
|  | kfree(io); | 
|  | } | 
|  |  | 
|  | static void ext4_invalidatepage_free_endio(struct page *page, unsigned long offset) | 
|  | { | 
|  | struct buffer_head *head, *bh; | 
|  | unsigned int curr_off = 0; | 
|  |  | 
|  | if (!page_has_buffers(page)) | 
|  | return; | 
|  | head = bh = page_buffers(page); | 
|  | do { | 
|  | if (offset <= curr_off && test_clear_buffer_uninit(bh) | 
|  | && bh->b_private) { | 
|  | ext4_free_io_end(bh->b_private); | 
|  | bh->b_private = NULL; | 
|  | bh->b_end_io = NULL; | 
|  | } | 
|  | curr_off = curr_off + bh->b_size; | 
|  | bh = bh->b_this_page; | 
|  | } while (bh != head); | 
|  | } | 
|  |  | 
|  | static void ext4_invalidatepage(struct page *page, unsigned long offset) | 
|  | { | 
|  | journal_t *journal = EXT4_JOURNAL(page->mapping->host); | 
|  |  | 
|  | /* | 
|  | * free any io_end structure allocated for buffers to be discarded | 
|  | */ | 
|  | if (ext4_should_dioread_nolock(page->mapping->host)) | 
|  | ext4_invalidatepage_free_endio(page, offset); | 
|  | /* | 
|  | * If it's a full truncate we just forget about the pending dirtying | 
|  | */ | 
|  | if (offset == 0) | 
|  | ClearPageChecked(page); | 
|  |  | 
|  | if (journal) | 
|  | jbd2_journal_invalidatepage(journal, page, offset); | 
|  | else | 
|  | block_invalidatepage(page, offset); | 
|  | } | 
|  |  | 
|  | static int ext4_releasepage(struct page *page, gfp_t wait) | 
|  | { | 
|  | journal_t *journal = EXT4_JOURNAL(page->mapping->host); | 
|  |  | 
|  | WARN_ON(PageChecked(page)); | 
|  | if (!page_has_buffers(page)) | 
|  | return 0; | 
|  | if (journal) | 
|  | return jbd2_journal_try_to_free_buffers(journal, page, wait); | 
|  | else | 
|  | return try_to_free_buffers(page); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * O_DIRECT for ext3 (or indirect map) based files | 
|  | * | 
|  | * If the O_DIRECT write will extend the file then add this inode to the | 
|  | * orphan list.  So recovery will truncate it back to the original size | 
|  | * if the machine crashes during the write. | 
|  | * | 
|  | * If the O_DIRECT write is intantiating holes inside i_size and the machine | 
|  | * crashes then stale disk data _may_ be exposed inside the file. But current | 
|  | * VFS code falls back into buffered path in that case so we are safe. | 
|  | */ | 
|  | static ssize_t ext4_ind_direct_IO(int rw, struct kiocb *iocb, | 
|  | const struct iovec *iov, loff_t offset, | 
|  | unsigned long nr_segs) | 
|  | { | 
|  | struct file *file = iocb->ki_filp; | 
|  | struct inode *inode = file->f_mapping->host; | 
|  | struct ext4_inode_info *ei = EXT4_I(inode); | 
|  | handle_t *handle; | 
|  | ssize_t ret; | 
|  | int orphan = 0; | 
|  | size_t count = iov_length(iov, nr_segs); | 
|  | int retries = 0; | 
|  |  | 
|  | if (rw == WRITE) { | 
|  | loff_t final_size = offset + count; | 
|  |  | 
|  | if (final_size > inode->i_size) { | 
|  | /* Credits for sb + inode write */ | 
|  | handle = ext4_journal_start(inode, 2); | 
|  | if (IS_ERR(handle)) { | 
|  | ret = PTR_ERR(handle); | 
|  | goto out; | 
|  | } | 
|  | ret = ext4_orphan_add(handle, inode); | 
|  | if (ret) { | 
|  | ext4_journal_stop(handle); | 
|  | goto out; | 
|  | } | 
|  | orphan = 1; | 
|  | ei->i_disksize = inode->i_size; | 
|  | ext4_journal_stop(handle); | 
|  | } | 
|  | } | 
|  |  | 
|  | retry: | 
|  | if (rw == READ && ext4_should_dioread_nolock(inode)) | 
|  | ret = blockdev_direct_IO_no_locking(rw, iocb, inode, | 
|  | inode->i_sb->s_bdev, iov, | 
|  | offset, nr_segs, | 
|  | ext4_get_block, NULL); | 
|  | else | 
|  | ret = blockdev_direct_IO(rw, iocb, inode, | 
|  | inode->i_sb->s_bdev, iov, | 
|  | offset, nr_segs, | 
|  | ext4_get_block, NULL); | 
|  | if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) | 
|  | goto retry; | 
|  |  | 
|  | if (orphan) { | 
|  | int err; | 
|  |  | 
|  | /* Credits for sb + inode write */ | 
|  | handle = ext4_journal_start(inode, 2); | 
|  | if (IS_ERR(handle)) { | 
|  | /* This is really bad luck. We've written the data | 
|  | * but cannot extend i_size. Bail out and pretend | 
|  | * the write failed... */ | 
|  | ret = PTR_ERR(handle); | 
|  | if (inode->i_nlink) | 
|  | ext4_orphan_del(NULL, inode); | 
|  |  | 
|  | goto out; | 
|  | } | 
|  | if (inode->i_nlink) | 
|  | ext4_orphan_del(handle, inode); | 
|  | if (ret > 0) { | 
|  | loff_t end = offset + ret; | 
|  | if (end > inode->i_size) { | 
|  | ei->i_disksize = end; | 
|  | i_size_write(inode, end); | 
|  | /* | 
|  | * We're going to return a positive `ret' | 
|  | * here due to non-zero-length I/O, so there's | 
|  | * no way of reporting error returns from | 
|  | * ext4_mark_inode_dirty() to userspace.  So | 
|  | * ignore it. | 
|  | */ | 
|  | ext4_mark_inode_dirty(handle, inode); | 
|  | } | 
|  | } | 
|  | err = ext4_journal_stop(handle); | 
|  | if (ret == 0) | 
|  | ret = err; | 
|  | } | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ext4_get_block_write(struct inode *inode, sector_t iblock, | 
|  | struct buffer_head *bh_result, int create) | 
|  | { | 
|  | handle_t *handle = ext4_journal_current_handle(); | 
|  | int ret = 0; | 
|  | unsigned max_blocks = bh_result->b_size >> inode->i_blkbits; | 
|  | int dio_credits; | 
|  | int started = 0; | 
|  |  | 
|  | ext4_debug("ext4_get_block_write: inode %lu, create flag %d\n", | 
|  | inode->i_ino, create); | 
|  | /* | 
|  | * ext4_get_block in prepare for a DIO write or buffer write. | 
|  | * We allocate an uinitialized extent if blocks haven't been allocated. | 
|  | * The extent will be converted to initialized after IO complete. | 
|  | */ | 
|  | create = EXT4_GET_BLOCKS_IO_CREATE_EXT; | 
|  |  | 
|  | if (!handle) { | 
|  | if (max_blocks > DIO_MAX_BLOCKS) | 
|  | max_blocks = DIO_MAX_BLOCKS; | 
|  | dio_credits = ext4_chunk_trans_blocks(inode, max_blocks); | 
|  | handle = ext4_journal_start(inode, dio_credits); | 
|  | if (IS_ERR(handle)) { | 
|  | ret = PTR_ERR(handle); | 
|  | goto out; | 
|  | } | 
|  | started = 1; | 
|  | } | 
|  |  | 
|  | ret = ext4_get_blocks(handle, inode, iblock, max_blocks, bh_result, | 
|  | create); | 
|  | if (ret > 0) { | 
|  | bh_result->b_size = (ret << inode->i_blkbits); | 
|  | ret = 0; | 
|  | } | 
|  | if (started) | 
|  | ext4_journal_stop(handle); | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void dump_completed_IO(struct inode * inode) | 
|  | { | 
|  | #ifdef	EXT4_DEBUG | 
|  | struct list_head *cur, *before, *after; | 
|  | ext4_io_end_t *io, *io0, *io1; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (list_empty(&EXT4_I(inode)->i_completed_io_list)){ | 
|  | ext4_debug("inode %lu completed_io list is empty\n", inode->i_ino); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ext4_debug("Dump inode %lu completed_io list \n", inode->i_ino); | 
|  | spin_lock_irqsave(&EXT4_I(inode)->i_completed_io_lock, flags); | 
|  | list_for_each_entry(io, &EXT4_I(inode)->i_completed_io_list, list){ | 
|  | cur = &io->list; | 
|  | before = cur->prev; | 
|  | io0 = container_of(before, ext4_io_end_t, list); | 
|  | after = cur->next; | 
|  | io1 = container_of(after, ext4_io_end_t, list); | 
|  |  | 
|  | ext4_debug("io 0x%p from inode %lu,prev 0x%p,next 0x%p\n", | 
|  | io, inode->i_ino, io0, io1); | 
|  | } | 
|  | spin_unlock_irqrestore(&EXT4_I(inode)->i_completed_io_lock, flags); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | /* | 
|  | * check a range of space and convert unwritten extents to written. | 
|  | */ | 
|  | static int ext4_end_io_nolock(ext4_io_end_t *io) | 
|  | { | 
|  | struct inode *inode = io->inode; | 
|  | loff_t offset = io->offset; | 
|  | ssize_t size = io->size; | 
|  | int ret = 0; | 
|  |  | 
|  | ext4_debug("ext4_end_io_nolock: io 0x%p from inode %lu,list->next 0x%p," | 
|  | "list->prev 0x%p\n", | 
|  | io, inode->i_ino, io->list.next, io->list.prev); | 
|  |  | 
|  | if (list_empty(&io->list)) | 
|  | return ret; | 
|  |  | 
|  | if (io->flag != EXT4_IO_UNWRITTEN) | 
|  | return ret; | 
|  |  | 
|  | ret = ext4_convert_unwritten_extents(inode, offset, size); | 
|  | if (ret < 0) { | 
|  | printk(KERN_EMERG "%s: failed to convert unwritten" | 
|  | "extents to written extents, error is %d" | 
|  | " io is still on inode %lu aio dio list\n", | 
|  | __func__, ret, inode->i_ino); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* clear the DIO AIO unwritten flag */ | 
|  | io->flag = 0; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * work on completed aio dio IO, to convert unwritten extents to extents | 
|  | */ | 
|  | static void ext4_end_io_work(struct work_struct *work) | 
|  | { | 
|  | ext4_io_end_t		*io = container_of(work, ext4_io_end_t, work); | 
|  | struct inode		*inode = io->inode; | 
|  | struct ext4_inode_info	*ei = EXT4_I(inode); | 
|  | unsigned long		flags; | 
|  | int			ret; | 
|  |  | 
|  | mutex_lock(&inode->i_mutex); | 
|  | ret = ext4_end_io_nolock(io); | 
|  | if (ret < 0) { | 
|  | mutex_unlock(&inode->i_mutex); | 
|  | return; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&ei->i_completed_io_lock, flags); | 
|  | if (!list_empty(&io->list)) | 
|  | list_del_init(&io->list); | 
|  | spin_unlock_irqrestore(&ei->i_completed_io_lock, flags); | 
|  | mutex_unlock(&inode->i_mutex); | 
|  | ext4_free_io_end(io); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This function is called from ext4_sync_file(). | 
|  | * | 
|  | * When IO is completed, the work to convert unwritten extents to | 
|  | * written is queued on workqueue but may not get immediately | 
|  | * scheduled. When fsync is called, we need to ensure the | 
|  | * conversion is complete before fsync returns. | 
|  | * The inode keeps track of a list of pending/completed IO that | 
|  | * might needs to do the conversion. This function walks through | 
|  | * the list and convert the related unwritten extents for completed IO | 
|  | * to written. | 
|  | * The function return the number of pending IOs on success. | 
|  | */ | 
|  | int flush_completed_IO(struct inode *inode) | 
|  | { | 
|  | ext4_io_end_t *io; | 
|  | struct ext4_inode_info *ei = EXT4_I(inode); | 
|  | unsigned long flags; | 
|  | int ret = 0; | 
|  | int ret2 = 0; | 
|  |  | 
|  | if (list_empty(&ei->i_completed_io_list)) | 
|  | return ret; | 
|  |  | 
|  | dump_completed_IO(inode); | 
|  | spin_lock_irqsave(&ei->i_completed_io_lock, flags); | 
|  | while (!list_empty(&ei->i_completed_io_list)){ | 
|  | io = list_entry(ei->i_completed_io_list.next, | 
|  | ext4_io_end_t, list); | 
|  | /* | 
|  | * Calling ext4_end_io_nolock() to convert completed | 
|  | * IO to written. | 
|  | * | 
|  | * When ext4_sync_file() is called, run_queue() may already | 
|  | * about to flush the work corresponding to this io structure. | 
|  | * It will be upset if it founds the io structure related | 
|  | * to the work-to-be schedule is freed. | 
|  | * | 
|  | * Thus we need to keep the io structure still valid here after | 
|  | * convertion finished. The io structure has a flag to | 
|  | * avoid double converting from both fsync and background work | 
|  | * queue work. | 
|  | */ | 
|  | spin_unlock_irqrestore(&ei->i_completed_io_lock, flags); | 
|  | ret = ext4_end_io_nolock(io); | 
|  | spin_lock_irqsave(&ei->i_completed_io_lock, flags); | 
|  | if (ret < 0) | 
|  | ret2 = ret; | 
|  | else | 
|  | list_del_init(&io->list); | 
|  | } | 
|  | spin_unlock_irqrestore(&ei->i_completed_io_lock, flags); | 
|  | return (ret2 < 0) ? ret2 : 0; | 
|  | } | 
|  |  | 
|  | static ext4_io_end_t *ext4_init_io_end (struct inode *inode, gfp_t flags) | 
|  | { | 
|  | ext4_io_end_t *io = NULL; | 
|  |  | 
|  | io = kmalloc(sizeof(*io), flags); | 
|  |  | 
|  | if (io) { | 
|  | igrab(inode); | 
|  | io->inode = inode; | 
|  | io->flag = 0; | 
|  | io->offset = 0; | 
|  | io->size = 0; | 
|  | io->page = NULL; | 
|  | INIT_WORK(&io->work, ext4_end_io_work); | 
|  | INIT_LIST_HEAD(&io->list); | 
|  | } | 
|  |  | 
|  | return io; | 
|  | } | 
|  |  | 
|  | static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset, | 
|  | ssize_t size, void *private) | 
|  | { | 
|  | ext4_io_end_t *io_end = iocb->private; | 
|  | struct workqueue_struct *wq; | 
|  | unsigned long flags; | 
|  | struct ext4_inode_info *ei; | 
|  |  | 
|  | /* if not async direct IO or dio with 0 bytes write, just return */ | 
|  | if (!io_end || !size) | 
|  | return; | 
|  |  | 
|  | ext_debug("ext4_end_io_dio(): io_end 0x%p" | 
|  | "for inode %lu, iocb 0x%p, offset %llu, size %llu\n", | 
|  | iocb->private, io_end->inode->i_ino, iocb, offset, | 
|  | size); | 
|  |  | 
|  | /* if not aio dio with unwritten extents, just free io and return */ | 
|  | if (io_end->flag != EXT4_IO_UNWRITTEN){ | 
|  | ext4_free_io_end(io_end); | 
|  | iocb->private = NULL; | 
|  | return; | 
|  | } | 
|  |  | 
|  | io_end->offset = offset; | 
|  | io_end->size = size; | 
|  | io_end->flag = EXT4_IO_UNWRITTEN; | 
|  | wq = EXT4_SB(io_end->inode->i_sb)->dio_unwritten_wq; | 
|  |  | 
|  | /* queue the work to convert unwritten extents to written */ | 
|  | queue_work(wq, &io_end->work); | 
|  |  | 
|  | /* Add the io_end to per-inode completed aio dio list*/ | 
|  | ei = EXT4_I(io_end->inode); | 
|  | spin_lock_irqsave(&ei->i_completed_io_lock, flags); | 
|  | list_add_tail(&io_end->list, &ei->i_completed_io_list); | 
|  | spin_unlock_irqrestore(&ei->i_completed_io_lock, flags); | 
|  | iocb->private = NULL; | 
|  | } | 
|  |  | 
|  | static void ext4_end_io_buffer_write(struct buffer_head *bh, int uptodate) | 
|  | { | 
|  | ext4_io_end_t *io_end = bh->b_private; | 
|  | struct workqueue_struct *wq; | 
|  | struct inode *inode; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!test_clear_buffer_uninit(bh) || !io_end) | 
|  | goto out; | 
|  |  | 
|  | if (!(io_end->inode->i_sb->s_flags & MS_ACTIVE)) { | 
|  | printk("sb umounted, discard end_io request for inode %lu\n", | 
|  | io_end->inode->i_ino); | 
|  | ext4_free_io_end(io_end); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | io_end->flag = EXT4_IO_UNWRITTEN; | 
|  | inode = io_end->inode; | 
|  |  | 
|  | /* Add the io_end to per-inode completed io list*/ | 
|  | spin_lock_irqsave(&EXT4_I(inode)->i_completed_io_lock, flags); | 
|  | list_add_tail(&io_end->list, &EXT4_I(inode)->i_completed_io_list); | 
|  | spin_unlock_irqrestore(&EXT4_I(inode)->i_completed_io_lock, flags); | 
|  |  | 
|  | wq = EXT4_SB(inode->i_sb)->dio_unwritten_wq; | 
|  | /* queue the work to convert unwritten extents to written */ | 
|  | queue_work(wq, &io_end->work); | 
|  | out: | 
|  | bh->b_private = NULL; | 
|  | bh->b_end_io = NULL; | 
|  | clear_buffer_uninit(bh); | 
|  | end_buffer_async_write(bh, uptodate); | 
|  | } | 
|  |  | 
|  | static int ext4_set_bh_endio(struct buffer_head *bh, struct inode *inode) | 
|  | { | 
|  | ext4_io_end_t *io_end; | 
|  | struct page *page = bh->b_page; | 
|  | loff_t offset = (sector_t)page->index << PAGE_CACHE_SHIFT; | 
|  | size_t size = bh->b_size; | 
|  |  | 
|  | retry: | 
|  | io_end = ext4_init_io_end(inode, GFP_ATOMIC); | 
|  | if (!io_end) { | 
|  | if (printk_ratelimit()) | 
|  | printk(KERN_WARNING "%s: allocation fail\n", __func__); | 
|  | schedule(); | 
|  | goto retry; | 
|  | } | 
|  | io_end->offset = offset; | 
|  | io_end->size = size; | 
|  | /* | 
|  | * We need to hold a reference to the page to make sure it | 
|  | * doesn't get evicted before ext4_end_io_work() has a chance | 
|  | * to convert the extent from written to unwritten. | 
|  | */ | 
|  | io_end->page = page; | 
|  | get_page(io_end->page); | 
|  |  | 
|  | bh->b_private = io_end; | 
|  | bh->b_end_io = ext4_end_io_buffer_write; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * For ext4 extent files, ext4 will do direct-io write to holes, | 
|  | * preallocated extents, and those write extend the file, no need to | 
|  | * fall back to buffered IO. | 
|  | * | 
|  | * For holes, we fallocate those blocks, mark them as unintialized | 
|  | * If those blocks were preallocated, we mark sure they are splited, but | 
|  | * still keep the range to write as unintialized. | 
|  | * | 
|  | * The unwrritten extents will be converted to written when DIO is completed. | 
|  | * For async direct IO, since the IO may still pending when return, we | 
|  | * set up an end_io call back function, which will do the convertion | 
|  | * when async direct IO completed. | 
|  | * | 
|  | * If the O_DIRECT write will extend the file then add this inode to the | 
|  | * orphan list.  So recovery will truncate it back to the original size | 
|  | * if the machine crashes during the write. | 
|  | * | 
|  | */ | 
|  | static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb, | 
|  | const struct iovec *iov, loff_t offset, | 
|  | unsigned long nr_segs) | 
|  | { | 
|  | struct file *file = iocb->ki_filp; | 
|  | struct inode *inode = file->f_mapping->host; | 
|  | ssize_t ret; | 
|  | size_t count = iov_length(iov, nr_segs); | 
|  |  | 
|  | loff_t final_size = offset + count; | 
|  | if (rw == WRITE && final_size <= inode->i_size) { | 
|  | /* | 
|  | * We could direct write to holes and fallocate. | 
|  | * | 
|  | * Allocated blocks to fill the hole are marked as uninitialized | 
|  | * to prevent paralel buffered read to expose the stale data | 
|  | * before DIO complete the data IO. | 
|  | * | 
|  | * As to previously fallocated extents, ext4 get_block | 
|  | * will just simply mark the buffer mapped but still | 
|  | * keep the extents uninitialized. | 
|  | * | 
|  | * for non AIO case, we will convert those unwritten extents | 
|  | * to written after return back from blockdev_direct_IO. | 
|  | * | 
|  | * for async DIO, the conversion needs to be defered when | 
|  | * the IO is completed. The ext4 end_io callback function | 
|  | * will be called to take care of the conversion work. | 
|  | * Here for async case, we allocate an io_end structure to | 
|  | * hook to the iocb. | 
|  | */ | 
|  | iocb->private = NULL; | 
|  | EXT4_I(inode)->cur_aio_dio = NULL; | 
|  | if (!is_sync_kiocb(iocb)) { | 
|  | iocb->private = ext4_init_io_end(inode, GFP_NOFS); | 
|  | if (!iocb->private) | 
|  | return -ENOMEM; | 
|  | /* | 
|  | * we save the io structure for current async | 
|  | * direct IO, so that later ext4_get_blocks() | 
|  | * could flag the io structure whether there | 
|  | * is a unwritten extents needs to be converted | 
|  | * when IO is completed. | 
|  | */ | 
|  | EXT4_I(inode)->cur_aio_dio = iocb->private; | 
|  | } | 
|  |  | 
|  | ret = blockdev_direct_IO(rw, iocb, inode, | 
|  | inode->i_sb->s_bdev, iov, | 
|  | offset, nr_segs, | 
|  | ext4_get_block_write, | 
|  | ext4_end_io_dio); | 
|  | if (iocb->private) | 
|  | EXT4_I(inode)->cur_aio_dio = NULL; | 
|  | /* | 
|  | * The io_end structure takes a reference to the inode, | 
|  | * that structure needs to be destroyed and the | 
|  | * reference to the inode need to be dropped, when IO is | 
|  | * complete, even with 0 byte write, or failed. | 
|  | * | 
|  | * In the successful AIO DIO case, the io_end structure will be | 
|  | * desctroyed and the reference to the inode will be dropped | 
|  | * after the end_io call back function is called. | 
|  | * | 
|  | * In the case there is 0 byte write, or error case, since | 
|  | * VFS direct IO won't invoke the end_io call back function, | 
|  | * we need to free the end_io structure here. | 
|  | */ | 
|  | if (ret != -EIOCBQUEUED && ret <= 0 && iocb->private) { | 
|  | ext4_free_io_end(iocb->private); | 
|  | iocb->private = NULL; | 
|  | } else if (ret > 0 && ext4_test_inode_state(inode, | 
|  | EXT4_STATE_DIO_UNWRITTEN)) { | 
|  | int err; | 
|  | /* | 
|  | * for non AIO case, since the IO is already | 
|  | * completed, we could do the convertion right here | 
|  | */ | 
|  | err = ext4_convert_unwritten_extents(inode, | 
|  | offset, ret); | 
|  | if (err < 0) | 
|  | ret = err; | 
|  | ext4_clear_inode_state(inode, EXT4_STATE_DIO_UNWRITTEN); | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* for write the the end of file case, we fall back to old way */ | 
|  | return ext4_ind_direct_IO(rw, iocb, iov, offset, nr_segs); | 
|  | } | 
|  |  | 
|  | static ssize_t ext4_direct_IO(int rw, struct kiocb *iocb, | 
|  | const struct iovec *iov, loff_t offset, | 
|  | unsigned long nr_segs) | 
|  | { | 
|  | struct file *file = iocb->ki_filp; | 
|  | struct inode *inode = file->f_mapping->host; | 
|  |  | 
|  | if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) | 
|  | return ext4_ext_direct_IO(rw, iocb, iov, offset, nr_segs); | 
|  |  | 
|  | return ext4_ind_direct_IO(rw, iocb, iov, offset, nr_segs); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Pages can be marked dirty completely asynchronously from ext4's journalling | 
|  | * activity.  By filemap_sync_pte(), try_to_unmap_one(), etc.  We cannot do | 
|  | * much here because ->set_page_dirty is called under VFS locks.  The page is | 
|  | * not necessarily locked. | 
|  | * | 
|  | * We cannot just dirty the page and leave attached buffers clean, because the | 
|  | * buffers' dirty state is "definitive".  We cannot just set the buffers dirty | 
|  | * or jbddirty because all the journalling code will explode. | 
|  | * | 
|  | * So what we do is to mark the page "pending dirty" and next time writepage | 
|  | * is called, propagate that into the buffers appropriately. | 
|  | */ | 
|  | static int ext4_journalled_set_page_dirty(struct page *page) | 
|  | { | 
|  | SetPageChecked(page); | 
|  | return __set_page_dirty_nobuffers(page); | 
|  | } | 
|  |  | 
|  | static const struct address_space_operations ext4_ordered_aops = { | 
|  | .readpage		= ext4_readpage, | 
|  | .readpages		= ext4_readpages, | 
|  | .writepage		= ext4_writepage, | 
|  | .sync_page		= block_sync_page, | 
|  | .write_begin		= ext4_write_begin, | 
|  | .write_end		= ext4_ordered_write_end, | 
|  | .bmap			= ext4_bmap, | 
|  | .invalidatepage		= ext4_invalidatepage, | 
|  | .releasepage		= ext4_releasepage, | 
|  | .direct_IO		= ext4_direct_IO, | 
|  | .migratepage		= buffer_migrate_page, | 
|  | .is_partially_uptodate  = block_is_partially_uptodate, | 
|  | .error_remove_page	= generic_error_remove_page, | 
|  | }; | 
|  |  | 
|  | static const struct address_space_operations ext4_writeback_aops = { | 
|  | .readpage		= ext4_readpage, | 
|  | .readpages		= ext4_readpages, | 
|  | .writepage		= ext4_writepage, | 
|  | .sync_page		= block_sync_page, | 
|  | .write_begin		= ext4_write_begin, | 
|  | .write_end		= ext4_writeback_write_end, | 
|  | .bmap			= ext4_bmap, | 
|  | .invalidatepage		= ext4_invalidatepage, | 
|  | .releasepage		= ext4_releasepage, | 
|  | .direct_IO		= ext4_direct_IO, | 
|  | .migratepage		= buffer_migrate_page, | 
|  | .is_partially_uptodate  = block_is_partially_uptodate, | 
|  | .error_remove_page	= generic_error_remove_page, | 
|  | }; | 
|  |  | 
|  | static const struct address_space_operations ext4_journalled_aops = { | 
|  | .readpage		= ext4_readpage, | 
|  | .readpages		= ext4_readpages, | 
|  | .writepage		= ext4_writepage, | 
|  | .sync_page		= block_sync_page, | 
|  | .write_begin		= ext4_write_begin, | 
|  | .write_end		= ext4_journalled_write_end, | 
|  | .set_page_dirty		= ext4_journalled_set_page_dirty, | 
|  | .bmap			= ext4_bmap, | 
|  | .invalidatepage		= ext4_invalidatepage, | 
|  | .releasepage		= ext4_releasepage, | 
|  | .is_partially_uptodate  = block_is_partially_uptodate, | 
|  | .error_remove_page	= generic_error_remove_page, | 
|  | }; | 
|  |  | 
|  | static const struct address_space_operations ext4_da_aops = { | 
|  | .readpage		= ext4_readpage, | 
|  | .readpages		= ext4_readpages, | 
|  | .writepage		= ext4_writepage, | 
|  | .writepages		= ext4_da_writepages, | 
|  | .sync_page		= block_sync_page, | 
|  | .write_begin		= ext4_da_write_begin, | 
|  | .write_end		= ext4_da_write_end, | 
|  | .bmap			= ext4_bmap, | 
|  | .invalidatepage		= ext4_da_invalidatepage, | 
|  | .releasepage		= ext4_releasepage, | 
|  | .direct_IO		= ext4_direct_IO, | 
|  | .migratepage		= buffer_migrate_page, | 
|  | .is_partially_uptodate  = block_is_partially_uptodate, | 
|  | .error_remove_page	= generic_error_remove_page, | 
|  | }; | 
|  |  | 
|  | void ext4_set_aops(struct inode *inode) | 
|  | { | 
|  | if (ext4_should_order_data(inode) && | 
|  | test_opt(inode->i_sb, DELALLOC)) | 
|  | inode->i_mapping->a_ops = &ext4_da_aops; | 
|  | else if (ext4_should_order_data(inode)) | 
|  | inode->i_mapping->a_ops = &ext4_ordered_aops; | 
|  | else if (ext4_should_writeback_data(inode) && | 
|  | test_opt(inode->i_sb, DELALLOC)) | 
|  | inode->i_mapping->a_ops = &ext4_da_aops; | 
|  | else if (ext4_should_writeback_data(inode)) | 
|  | inode->i_mapping->a_ops = &ext4_writeback_aops; | 
|  | else | 
|  | inode->i_mapping->a_ops = &ext4_journalled_aops; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * ext4_block_truncate_page() zeroes out a mapping from file offset `from' | 
|  | * up to the end of the block which corresponds to `from'. | 
|  | * This required during truncate. We need to physically zero the tail end | 
|  | * of that block so it doesn't yield old data if the file is later grown. | 
|  | */ | 
|  | int ext4_block_truncate_page(handle_t *handle, | 
|  | struct address_space *mapping, loff_t from) | 
|  | { | 
|  | ext4_fsblk_t index = from >> PAGE_CACHE_SHIFT; | 
|  | unsigned offset = from & (PAGE_CACHE_SIZE-1); | 
|  | unsigned blocksize, length, pos; | 
|  | ext4_lblk_t iblock; | 
|  | struct inode *inode = mapping->host; | 
|  | struct buffer_head *bh; | 
|  | struct page *page; | 
|  | int err = 0; | 
|  |  | 
|  | page = find_or_create_page(mapping, from >> PAGE_CACHE_SHIFT, | 
|  | mapping_gfp_mask(mapping) & ~__GFP_FS); | 
|  | if (!page) | 
|  | return -EINVAL; | 
|  |  | 
|  | blocksize = inode->i_sb->s_blocksize; | 
|  | length = blocksize - (offset & (blocksize - 1)); | 
|  | iblock = index << (PAGE_CACHE_SHIFT - inode->i_sb->s_blocksize_bits); | 
|  |  | 
|  | /* | 
|  | * For "nobh" option,  we can only work if we don't need to | 
|  | * read-in the page - otherwise we create buffers to do the IO. | 
|  | */ | 
|  | if (!page_has_buffers(page) && test_opt(inode->i_sb, NOBH) && | 
|  | ext4_should_writeback_data(inode) && PageUptodate(page)) { | 
|  | zero_user(page, offset, length); | 
|  | set_page_dirty(page); | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | if (!page_has_buffers(page)) | 
|  | create_empty_buffers(page, blocksize, 0); | 
|  |  | 
|  | /* Find the buffer that contains "offset" */ | 
|  | bh = page_buffers(page); | 
|  | pos = blocksize; | 
|  | while (offset >= pos) { | 
|  | bh = bh->b_this_page; | 
|  | iblock++; | 
|  | pos += blocksize; | 
|  | } | 
|  |  | 
|  | err = 0; | 
|  | if (buffer_freed(bh)) { | 
|  | BUFFER_TRACE(bh, "freed: skip"); | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | if (!buffer_mapped(bh)) { | 
|  | BUFFER_TRACE(bh, "unmapped"); | 
|  | ext4_get_block(inode, iblock, bh, 0); | 
|  | /* unmapped? It's a hole - nothing to do */ | 
|  | if (!buffer_mapped(bh)) { | 
|  | BUFFER_TRACE(bh, "still unmapped"); | 
|  | goto unlock; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Ok, it's mapped. Make sure it's up-to-date */ | 
|  | if (PageUptodate(page)) | 
|  | set_buffer_uptodate(bh); | 
|  |  | 
|  | if (!buffer_uptodate(bh)) { | 
|  | err = -EIO; | 
|  | ll_rw_block(READ, 1, &bh); | 
|  | wait_on_buffer(bh); | 
|  | /* Uhhuh. Read error. Complain and punt. */ | 
|  | if (!buffer_uptodate(bh)) | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | if (ext4_should_journal_data(inode)) { | 
|  | BUFFER_TRACE(bh, "get write access"); | 
|  | err = ext4_journal_get_write_access(handle, bh); | 
|  | if (err) | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | zero_user(page, offset, length); | 
|  |  | 
|  | BUFFER_TRACE(bh, "zeroed end of block"); | 
|  |  | 
|  | err = 0; | 
|  | if (ext4_should_journal_data(inode)) { | 
|  | err = ext4_handle_dirty_metadata(handle, inode, bh); | 
|  | } else { | 
|  | if (ext4_should_order_data(inode)) | 
|  | err = ext4_jbd2_file_inode(handle, inode); | 
|  | mark_buffer_dirty(bh); | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | unlock_page(page); | 
|  | page_cache_release(page); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Probably it should be a library function... search for first non-zero word | 
|  | * or memcmp with zero_page, whatever is better for particular architecture. | 
|  | * Linus? | 
|  | */ | 
|  | static inline int all_zeroes(__le32 *p, __le32 *q) | 
|  | { | 
|  | while (p < q) | 
|  | if (*p++) | 
|  | return 0; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ext4_find_shared - find the indirect blocks for partial truncation. | 
|  | *	@inode:	  inode in question | 
|  | *	@depth:	  depth of the affected branch | 
|  | *	@offsets: offsets of pointers in that branch (see ext4_block_to_path) | 
|  | *	@chain:	  place to store the pointers to partial indirect blocks | 
|  | *	@top:	  place to the (detached) top of branch | 
|  | * | 
|  | *	This is a helper function used by ext4_truncate(). | 
|  | * | 
|  | *	When we do truncate() we may have to clean the ends of several | 
|  | *	indirect blocks but leave the blocks themselves alive. Block is | 
|  | *	partially truncated if some data below the new i_size is refered | 
|  | *	from it (and it is on the path to the first completely truncated | 
|  | *	data block, indeed).  We have to free the top of that path along | 
|  | *	with everything to the right of the path. Since no allocation | 
|  | *	past the truncation point is possible until ext4_truncate() | 
|  | *	finishes, we may safely do the latter, but top of branch may | 
|  | *	require special attention - pageout below the truncation point | 
|  | *	might try to populate it. | 
|  | * | 
|  | *	We atomically detach the top of branch from the tree, store the | 
|  | *	block number of its root in *@top, pointers to buffer_heads of | 
|  | *	partially truncated blocks - in @chain[].bh and pointers to | 
|  | *	their last elements that should not be removed - in | 
|  | *	@chain[].p. Return value is the pointer to last filled element | 
|  | *	of @chain. | 
|  | * | 
|  | *	The work left to caller to do the actual freeing of subtrees: | 
|  | *		a) free the subtree starting from *@top | 
|  | *		b) free the subtrees whose roots are stored in | 
|  | *			(@chain[i].p+1 .. end of @chain[i].bh->b_data) | 
|  | *		c) free the subtrees growing from the inode past the @chain[0]. | 
|  | *			(no partially truncated stuff there).  */ | 
|  |  | 
|  | static Indirect *ext4_find_shared(struct inode *inode, int depth, | 
|  | ext4_lblk_t offsets[4], Indirect chain[4], | 
|  | __le32 *top) | 
|  | { | 
|  | Indirect *partial, *p; | 
|  | int k, err; | 
|  |  | 
|  | *top = 0; | 
|  | /* Make k index the deepest non-null offset + 1 */ | 
|  | for (k = depth; k > 1 && !offsets[k-1]; k--) | 
|  | ; | 
|  | partial = ext4_get_branch(inode, k, offsets, chain, &err); | 
|  | /* Writer: pointers */ | 
|  | if (!partial) | 
|  | partial = chain + k-1; | 
|  | /* | 
|  | * If the branch acquired continuation since we've looked at it - | 
|  | * fine, it should all survive and (new) top doesn't belong to us. | 
|  | */ | 
|  | if (!partial->key && *partial->p) | 
|  | /* Writer: end */ | 
|  | goto no_top; | 
|  | for (p = partial; (p > chain) && all_zeroes((__le32 *) p->bh->b_data, p->p); p--) | 
|  | ; | 
|  | /* | 
|  | * OK, we've found the last block that must survive. The rest of our | 
|  | * branch should be detached before unlocking. However, if that rest | 
|  | * of branch is all ours and does not grow immediately from the inode | 
|  | * it's easier to cheat and just decrement partial->p. | 
|  | */ | 
|  | if (p == chain + k - 1 && p > chain) { | 
|  | p->p--; | 
|  | } else { | 
|  | *top = *p->p; | 
|  | /* Nope, don't do this in ext4.  Must leave the tree intact */ | 
|  | #if 0 | 
|  | *p->p = 0; | 
|  | #endif | 
|  | } | 
|  | /* Writer: end */ | 
|  |  | 
|  | while (partial > p) { | 
|  | brelse(partial->bh); | 
|  | partial--; | 
|  | } | 
|  | no_top: | 
|  | return partial; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Zero a number of block pointers in either an inode or an indirect block. | 
|  | * If we restart the transaction we must again get write access to the | 
|  | * indirect block for further modification. | 
|  | * | 
|  | * We release `count' blocks on disk, but (last - first) may be greater | 
|  | * than `count' because there can be holes in there. | 
|  | */ | 
|  | static int ext4_clear_blocks(handle_t *handle, struct inode *inode, | 
|  | struct buffer_head *bh, | 
|  | ext4_fsblk_t block_to_free, | 
|  | unsigned long count, __le32 *first, | 
|  | __le32 *last) | 
|  | { | 
|  | __le32 *p; | 
|  | int	flags = EXT4_FREE_BLOCKS_FORGET | EXT4_FREE_BLOCKS_VALIDATED; | 
|  |  | 
|  | if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode)) | 
|  | flags |= EXT4_FREE_BLOCKS_METADATA; | 
|  |  | 
|  | if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), block_to_free, | 
|  | count)) { | 
|  | ext4_error(inode->i_sb, "inode #%lu: " | 
|  | "attempt to clear blocks %llu len %lu, invalid", | 
|  | inode->i_ino, (unsigned long long) block_to_free, | 
|  | count); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | if (try_to_extend_transaction(handle, inode)) { | 
|  | if (bh) { | 
|  | BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); | 
|  | ext4_handle_dirty_metadata(handle, inode, bh); | 
|  | } | 
|  | ext4_mark_inode_dirty(handle, inode); | 
|  | ext4_truncate_restart_trans(handle, inode, | 
|  | blocks_for_truncate(inode)); | 
|  | if (bh) { | 
|  | BUFFER_TRACE(bh, "retaking write access"); | 
|  | ext4_journal_get_write_access(handle, bh); | 
|  | } | 
|  | } | 
|  |  | 
|  | for (p = first; p < last; p++) | 
|  | *p = 0; | 
|  |  | 
|  | ext4_free_blocks(handle, inode, 0, block_to_free, count, flags); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ext4_free_data - free a list of data blocks | 
|  | * @handle:	handle for this transaction | 
|  | * @inode:	inode we are dealing with | 
|  | * @this_bh:	indirect buffer_head which contains *@first and *@last | 
|  | * @first:	array of block numbers | 
|  | * @last:	points immediately past the end of array | 
|  | * | 
|  | * We are freeing all blocks refered from that array (numbers are stored as | 
|  | * little-endian 32-bit) and updating @inode->i_blocks appropriately. | 
|  | * | 
|  | * We accumulate contiguous runs of blocks to free.  Conveniently, if these | 
|  | * blocks are contiguous then releasing them at one time will only affect one | 
|  | * or two bitmap blocks (+ group descriptor(s) and superblock) and we won't | 
|  | * actually use a lot of journal space. | 
|  | * | 
|  | * @this_bh will be %NULL if @first and @last point into the inode's direct | 
|  | * block pointers. | 
|  | */ | 
|  | static void ext4_free_data(handle_t *handle, struct inode *inode, | 
|  | struct buffer_head *this_bh, | 
|  | __le32 *first, __le32 *last) | 
|  | { | 
|  | ext4_fsblk_t block_to_free = 0;    /* Starting block # of a run */ | 
|  | unsigned long count = 0;	    /* Number of blocks in the run */ | 
|  | __le32 *block_to_free_p = NULL;	    /* Pointer into inode/ind | 
|  | corresponding to | 
|  | block_to_free */ | 
|  | ext4_fsblk_t nr;		    /* Current block # */ | 
|  | __le32 *p;			    /* Pointer into inode/ind | 
|  | for current block */ | 
|  | int err; | 
|  |  | 
|  | if (this_bh) {				/* For indirect block */ | 
|  | BUFFER_TRACE(this_bh, "get_write_access"); | 
|  | err = ext4_journal_get_write_access(handle, this_bh); | 
|  | /* Important: if we can't update the indirect pointers | 
|  | * to the blocks, we can't free them. */ | 
|  | if (err) | 
|  | return; | 
|  | } | 
|  |  | 
|  | for (p = first; p < last; p++) { | 
|  | nr = le32_to_cpu(*p); | 
|  | if (nr) { | 
|  | /* accumulate blocks to free if they're contiguous */ | 
|  | if (count == 0) { | 
|  | block_to_free = nr; | 
|  | block_to_free_p = p; | 
|  | count = 1; | 
|  | } else if (nr == block_to_free + count) { | 
|  | count++; | 
|  | } else { | 
|  | if (ext4_clear_blocks(handle, inode, this_bh, | 
|  | block_to_free, count, | 
|  | block_to_free_p, p)) | 
|  | break; | 
|  | block_to_free = nr; | 
|  | block_to_free_p = p; | 
|  | count = 1; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (count > 0) | 
|  | ext4_clear_blocks(handle, inode, this_bh, block_to_free, | 
|  | count, block_to_free_p, p); | 
|  |  | 
|  | if (this_bh) { | 
|  | BUFFER_TRACE(this_bh, "call ext4_handle_dirty_metadata"); | 
|  |  | 
|  | /* | 
|  | * The buffer head should have an attached journal head at this | 
|  | * point. However, if the data is corrupted and an indirect | 
|  | * block pointed to itself, it would have been detached when | 
|  | * the block was cleared. Check for this instead of OOPSing. | 
|  | */ | 
|  | if ((EXT4_JOURNAL(inode) == NULL) || bh2jh(this_bh)) | 
|  | ext4_handle_dirty_metadata(handle, inode, this_bh); | 
|  | else | 
|  | ext4_error(inode->i_sb, | 
|  | "circular indirect block detected, " | 
|  | "inode=%lu, block=%llu", | 
|  | inode->i_ino, | 
|  | (unsigned long long) this_bh->b_blocknr); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | *	ext4_free_branches - free an array of branches | 
|  | *	@handle: JBD handle for this transaction | 
|  | *	@inode:	inode we are dealing with | 
|  | *	@parent_bh: the buffer_head which contains *@first and *@last | 
|  | *	@first:	array of block numbers | 
|  | *	@last:	pointer immediately past the end of array | 
|  | *	@depth:	depth of the branches to free | 
|  | * | 
|  | *	We are freeing all blocks refered from these branches (numbers are | 
|  | *	stored as little-endian 32-bit) and updating @inode->i_blocks | 
|  | *	appropriately. | 
|  | */ | 
|  | static void ext4_free_branches(handle_t *handle, struct inode *inode, | 
|  | struct buffer_head *parent_bh, | 
|  | __le32 *first, __le32 *last, int depth) | 
|  | { | 
|  | ext4_fsblk_t nr; | 
|  | __le32 *p; | 
|  |  | 
|  | if (ext4_handle_is_aborted(handle)) | 
|  | return; | 
|  |  | 
|  | if (depth--) { | 
|  | struct buffer_head *bh; | 
|  | int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); | 
|  | p = last; | 
|  | while (--p >= first) { | 
|  | nr = le32_to_cpu(*p); | 
|  | if (!nr) | 
|  | continue;		/* A hole */ | 
|  |  | 
|  | if (!ext4_data_block_valid(EXT4_SB(inode->i_sb), | 
|  | nr, 1)) { | 
|  | ext4_error(inode->i_sb, | 
|  | "indirect mapped block in inode " | 
|  | "#%lu invalid (level %d, blk #%lu)", | 
|  | inode->i_ino, depth, | 
|  | (unsigned long) nr); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Go read the buffer for the next level down */ | 
|  | bh = sb_bread(inode->i_sb, nr); | 
|  |  | 
|  | /* | 
|  | * A read failure? Report error and clear slot | 
|  | * (should be rare). | 
|  | */ | 
|  | if (!bh) { | 
|  | ext4_error(inode->i_sb, | 
|  | "Read failure, inode=%lu, block=%llu", | 
|  | inode->i_ino, nr); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* This zaps the entire block.  Bottom up. */ | 
|  | BUFFER_TRACE(bh, "free child branches"); | 
|  | ext4_free_branches(handle, inode, bh, | 
|  | (__le32 *) bh->b_data, | 
|  | (__le32 *) bh->b_data + addr_per_block, | 
|  | depth); | 
|  |  | 
|  | /* | 
|  | * We've probably journalled the indirect block several | 
|  | * times during the truncate.  But it's no longer | 
|  | * needed and we now drop it from the transaction via | 
|  | * jbd2_journal_revoke(). | 
|  | * | 
|  | * That's easy if it's exclusively part of this | 
|  | * transaction.  But if it's part of the committing | 
|  | * transaction then jbd2_journal_forget() will simply | 
|  | * brelse() it.  That means that if the underlying | 
|  | * block is reallocated in ext4_get_block(), | 
|  | * unmap_underlying_metadata() will find this block | 
|  | * and will try to get rid of it.  damn, damn. | 
|  | * | 
|  | * If this block has already been committed to the | 
|  | * journal, a revoke record will be written.  And | 
|  | * revoke records must be emitted *before* clearing | 
|  | * this block's bit in the bitmaps. | 
|  | */ | 
|  | ext4_forget(handle, 1, inode, bh, bh->b_blocknr); | 
|  |  | 
|  | /* | 
|  | * Everything below this this pointer has been | 
|  | * released.  Now let this top-of-subtree go. | 
|  | * | 
|  | * We want the freeing of this indirect block to be | 
|  | * atomic in the journal with the updating of the | 
|  | * bitmap block which owns it.  So make some room in | 
|  | * the journal. | 
|  | * | 
|  | * We zero the parent pointer *after* freeing its | 
|  | * pointee in the bitmaps, so if extend_transaction() | 
|  | * for some reason fails to put the bitmap changes and | 
|  | * the release into the same transaction, recovery | 
|  | * will merely complain about releasing a free block, | 
|  | * rather than leaking blocks. | 
|  | */ | 
|  | if (ext4_handle_is_aborted(handle)) | 
|  | return; | 
|  | if (try_to_extend_transaction(handle, inode)) { | 
|  | ext4_mark_inode_dirty(handle, inode); | 
|  | ext4_truncate_restart_trans(handle, inode, | 
|  | blocks_for_truncate(inode)); | 
|  | } | 
|  |  | 
|  | ext4_free_blocks(handle, inode, 0, nr, 1, | 
|  | EXT4_FREE_BLOCKS_METADATA); | 
|  |  | 
|  | if (parent_bh) { | 
|  | /* | 
|  | * The block which we have just freed is | 
|  | * pointed to by an indirect block: journal it | 
|  | */ | 
|  | BUFFER_TRACE(parent_bh, "get_write_access"); | 
|  | if (!ext4_journal_get_write_access(handle, | 
|  | parent_bh)){ | 
|  | *p = 0; | 
|  | BUFFER_TRACE(parent_bh, | 
|  | "call ext4_handle_dirty_metadata"); | 
|  | ext4_handle_dirty_metadata(handle, | 
|  | inode, | 
|  | parent_bh); | 
|  | } | 
|  | } | 
|  | } | 
|  | } else { | 
|  | /* We have reached the bottom of the tree. */ | 
|  | BUFFER_TRACE(parent_bh, "free data blocks"); | 
|  | ext4_free_data(handle, inode, parent_bh, first, last); | 
|  | } | 
|  | } | 
|  |  | 
|  | int ext4_can_truncate(struct inode *inode) | 
|  | { | 
|  | if (IS_APPEND(inode) || IS_IMMUTABLE(inode)) | 
|  | return 0; | 
|  | if (S_ISREG(inode->i_mode)) | 
|  | return 1; | 
|  | if (S_ISDIR(inode->i_mode)) | 
|  | return 1; | 
|  | if (S_ISLNK(inode->i_mode)) | 
|  | return !ext4_inode_is_fast_symlink(inode); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * ext4_truncate() | 
|  | * | 
|  | * We block out ext4_get_block() block instantiations across the entire | 
|  | * transaction, and VFS/VM ensures that ext4_truncate() cannot run | 
|  | * simultaneously on behalf of the same inode. | 
|  | * | 
|  | * As we work through the truncate and commmit bits of it to the journal there | 
|  | * is one core, guiding principle: the file's tree must always be consistent on | 
|  | * disk.  We must be able to restart the truncate after a crash. | 
|  | * | 
|  | * The file's tree may be transiently inconsistent in memory (although it | 
|  | * probably isn't), but whenever we close off and commit a journal transaction, | 
|  | * the contents of (the filesystem + the journal) must be consistent and | 
|  | * restartable.  It's pretty simple, really: bottom up, right to left (although | 
|  | * left-to-right works OK too). | 
|  | * | 
|  | * Note that at recovery time, journal replay occurs *before* the restart of | 
|  | * truncate against the orphan inode list. | 
|  | * | 
|  | * The committed inode has the new, desired i_size (which is the same as | 
|  | * i_disksize in this case).  After a crash, ext4_orphan_cleanup() will see | 
|  | * that this inode's truncate did not complete and it will again call | 
|  | * ext4_truncate() to have another go.  So there will be instantiated blocks | 
|  | * to the right of the truncation point in a crashed ext4 filesystem.  But | 
|  | * that's fine - as long as they are linked from the inode, the post-crash | 
|  | * ext4_truncate() run will find them and release them. | 
|  | */ | 
|  | void ext4_truncate(struct inode *inode) | 
|  | { | 
|  | handle_t *handle; | 
|  | struct ext4_inode_info *ei = EXT4_I(inode); | 
|  | __le32 *i_data = ei->i_data; | 
|  | int addr_per_block = EXT4_ADDR_PER_BLOCK(inode->i_sb); | 
|  | struct address_space *mapping = inode->i_mapping; | 
|  | ext4_lblk_t offsets[4]; | 
|  | Indirect chain[4]; | 
|  | Indirect *partial; | 
|  | __le32 nr = 0; | 
|  | int n; | 
|  | ext4_lblk_t last_block; | 
|  | unsigned blocksize = inode->i_sb->s_blocksize; | 
|  |  | 
|  | if (!ext4_can_truncate(inode)) | 
|  | return; | 
|  |  | 
|  | EXT4_I(inode)->i_flags &= ~EXT4_EOFBLOCKS_FL; | 
|  |  | 
|  | if (inode->i_size == 0 && !test_opt(inode->i_sb, NO_AUTO_DA_ALLOC)) | 
|  | ext4_set_inode_state(inode, EXT4_STATE_DA_ALLOC_CLOSE); | 
|  |  | 
|  | if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL) { | 
|  | ext4_ext_truncate(inode); | 
|  | return; | 
|  | } | 
|  |  | 
|  | handle = start_transaction(inode); | 
|  | if (IS_ERR(handle)) | 
|  | return;		/* AKPM: return what? */ | 
|  |  | 
|  | last_block = (inode->i_size + blocksize-1) | 
|  | >> EXT4_BLOCK_SIZE_BITS(inode->i_sb); | 
|  |  | 
|  | if (inode->i_size & (blocksize - 1)) | 
|  | if (ext4_block_truncate_page(handle, mapping, inode->i_size)) | 
|  | goto out_stop; | 
|  |  | 
|  | n = ext4_block_to_path(inode, last_block, offsets, NULL); | 
|  | if (n == 0) | 
|  | goto out_stop;	/* error */ | 
|  |  | 
|  | /* | 
|  | * OK.  This truncate is going to happen.  We add the inode to the | 
|  | * orphan list, so that if this truncate spans multiple transactions, | 
|  | * and we crash, we will resume the truncate when the filesystem | 
|  | * recovers.  It also marks the inode dirty, to catch the new size. | 
|  | * | 
|  | * Implication: the file must always be in a sane, consistent | 
|  | * truncatable state while each transaction commits. | 
|  | */ | 
|  | if (ext4_orphan_add(handle, inode)) | 
|  | goto out_stop; | 
|  |  | 
|  | /* | 
|  | * From here we block out all ext4_get_block() callers who want to | 
|  | * modify the block allocation tree. | 
|  | */ | 
|  | down_write(&ei->i_data_sem); | 
|  |  | 
|  | ext4_discard_preallocations(inode); | 
|  |  | 
|  | /* | 
|  | * The orphan list entry will now protect us from any crash which | 
|  | * occurs before the truncate completes, so it is now safe to propagate | 
|  | * the new, shorter inode size (held for now in i_size) into the | 
|  | * on-disk inode. We do this via i_disksize, which is the value which | 
|  | * ext4 *really* writes onto the disk inode. | 
|  | */ | 
|  | ei->i_disksize = inode->i_size; | 
|  |  | 
|  | if (n == 1) {		/* direct blocks */ | 
|  | ext4_free_data(handle, inode, NULL, i_data+offsets[0], | 
|  | i_data + EXT4_NDIR_BLOCKS); | 
|  | goto do_indirects; | 
|  | } | 
|  |  | 
|  | partial = ext4_find_shared(inode, n, offsets, chain, &nr); | 
|  | /* Kill the top of shared branch (not detached) */ | 
|  | if (nr) { | 
|  | if (partial == chain) { | 
|  | /* Shared branch grows from the inode */ | 
|  | ext4_free_branches(handle, inode, NULL, | 
|  | &nr, &nr+1, (chain+n-1) - partial); | 
|  | *partial->p = 0; | 
|  | /* | 
|  | * We mark the inode dirty prior to restart, | 
|  | * and prior to stop.  No need for it here. | 
|  | */ | 
|  | } else { | 
|  | /* Shared branch grows from an indirect block */ | 
|  | BUFFER_TRACE(partial->bh, "get_write_access"); | 
|  | ext4_free_branches(handle, inode, partial->bh, | 
|  | partial->p, | 
|  | partial->p+1, (chain+n-1) - partial); | 
|  | } | 
|  | } | 
|  | /* Clear the ends of indirect blocks on the shared branch */ | 
|  | while (partial > chain) { | 
|  | ext4_free_branches(handle, inode, partial->bh, partial->p + 1, | 
|  | (__le32*)partial->bh->b_data+addr_per_block, | 
|  | (chain+n-1) - partial); | 
|  | BUFFER_TRACE(partial->bh, "call brelse"); | 
|  | brelse(partial->bh); | 
|  | partial--; | 
|  | } | 
|  | do_indirects: | 
|  | /* Kill the remaining (whole) subtrees */ | 
|  | switch (offsets[0]) { | 
|  | default: | 
|  | nr = i_data[EXT4_IND_BLOCK]; | 
|  | if (nr) { | 
|  | ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 1); | 
|  | i_data[EXT4_IND_BLOCK] = 0; | 
|  | } | 
|  | case EXT4_IND_BLOCK: | 
|  | nr = i_data[EXT4_DIND_BLOCK]; | 
|  | if (nr) { | 
|  | ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 2); | 
|  | i_data[EXT4_DIND_BLOCK] = 0; | 
|  | } | 
|  | case EXT4_DIND_BLOCK: | 
|  | nr = i_data[EXT4_TIND_BLOCK]; | 
|  | if (nr) { | 
|  | ext4_free_branches(handle, inode, NULL, &nr, &nr+1, 3); | 
|  | i_data[EXT4_TIND_BLOCK] = 0; | 
|  | } | 
|  | case EXT4_TIND_BLOCK: | 
|  | ; | 
|  | } | 
|  |  | 
|  | up_write(&ei->i_data_sem); | 
|  | inode->i_mtime = inode->i_ctime = ext4_current_time(inode); | 
|  | ext4_mark_inode_dirty(handle, inode); | 
|  |  | 
|  | /* | 
|  | * In a multi-transaction truncate, we only make the final transaction | 
|  | * synchronous | 
|  | */ | 
|  | if (IS_SYNC(inode)) | 
|  | ext4_handle_sync(handle); | 
|  | out_stop: | 
|  | /* | 
|  | * If this was a simple ftruncate(), and the file will remain alive | 
|  | * then we need to clear up the orphan record which we created above. | 
|  | * However, if this was a real unlink then we were called by | 
|  | * ext4_delete_inode(), and we allow that function to clean up the | 
|  | * orphan info for us. | 
|  | */ | 
|  | if (inode->i_nlink) | 
|  | ext4_orphan_del(handle, inode); | 
|  |  | 
|  | ext4_journal_stop(handle); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * ext4_get_inode_loc returns with an extra refcount against the inode's | 
|  | * underlying buffer_head on success. If 'in_mem' is true, we have all | 
|  | * data in memory that is needed to recreate the on-disk version of this | 
|  | * inode. | 
|  | */ | 
|  | static int __ext4_get_inode_loc(struct inode *inode, | 
|  | struct ext4_iloc *iloc, int in_mem) | 
|  | { | 
|  | struct ext4_group_desc	*gdp; | 
|  | struct buffer_head	*bh; | 
|  | struct super_block	*sb = inode->i_sb; | 
|  | ext4_fsblk_t		block; | 
|  | int			inodes_per_block, inode_offset; | 
|  |  | 
|  | iloc->bh = NULL; | 
|  | if (!ext4_valid_inum(sb, inode->i_ino)) | 
|  | return -EIO; | 
|  |  | 
|  | iloc->block_group = (inode->i_ino - 1) / EXT4_INODES_PER_GROUP(sb); | 
|  | gdp = ext4_get_group_desc(sb, iloc->block_group, NULL); | 
|  | if (!gdp) | 
|  | return -EIO; | 
|  |  | 
|  | /* | 
|  | * Figure out the offset within the block group inode table | 
|  | */ | 
|  | inodes_per_block = (EXT4_BLOCK_SIZE(sb) / EXT4_INODE_SIZE(sb)); | 
|  | inode_offset = ((inode->i_ino - 1) % | 
|  | EXT4_INODES_PER_GROUP(sb)); | 
|  | block = ext4_inode_table(sb, gdp) + (inode_offset / inodes_per_block); | 
|  | iloc->offset = (inode_offset % inodes_per_block) * EXT4_INODE_SIZE(sb); | 
|  |  | 
|  | bh = sb_getblk(sb, block); | 
|  | if (!bh) { | 
|  | ext4_error(sb, "unable to read inode block - " | 
|  | "inode=%lu, block=%llu", inode->i_ino, block); | 
|  | return -EIO; | 
|  | } | 
|  | if (!buffer_uptodate(bh)) { | 
|  | lock_buffer(bh); | 
|  |  | 
|  | /* | 
|  | * If the buffer has the write error flag, we have failed | 
|  | * to write out another inode in the same block.  In this | 
|  | * case, we don't have to read the block because we may | 
|  | * read the old inode data successfully. | 
|  | */ | 
|  | if (buffer_write_io_error(bh) && !buffer_uptodate(bh)) | 
|  | set_buffer_uptodate(bh); | 
|  |  | 
|  | if (buffer_uptodate(bh)) { | 
|  | /* someone brought it uptodate while we waited */ | 
|  | unlock_buffer(bh); | 
|  | goto has_buffer; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If we have all information of the inode in memory and this | 
|  | * is the only valid inode in the block, we need not read the | 
|  | * block. | 
|  | */ | 
|  | if (in_mem) { | 
|  | struct buffer_head *bitmap_bh; | 
|  | int i, start; | 
|  |  | 
|  | start = inode_offset & ~(inodes_per_block - 1); | 
|  |  | 
|  | /* Is the inode bitmap in cache? */ | 
|  | bitmap_bh = sb_getblk(sb, ext4_inode_bitmap(sb, gdp)); | 
|  | if (!bitmap_bh) | 
|  | goto make_io; | 
|  |  | 
|  | /* | 
|  | * If the inode bitmap isn't in cache then the | 
|  | * optimisation may end up performing two reads instead | 
|  | * of one, so skip it. | 
|  | */ | 
|  | if (!buffer_uptodate(bitmap_bh)) { | 
|  | brelse(bitmap_bh); | 
|  | goto make_io; | 
|  | } | 
|  | for (i = start; i < start + inodes_per_block; i++) { | 
|  | if (i == inode_offset) | 
|  | continue; | 
|  | if (ext4_test_bit(i, bitmap_bh->b_data)) | 
|  | break; | 
|  | } | 
|  | brelse(bitmap_bh); | 
|  | if (i == start + inodes_per_block) { | 
|  | /* all other inodes are free, so skip I/O */ | 
|  | memset(bh->b_data, 0, bh->b_size); | 
|  | set_buffer_uptodate(bh); | 
|  | unlock_buffer(bh); | 
|  | goto has_buffer; | 
|  | } | 
|  | } | 
|  |  | 
|  | make_io: | 
|  | /* | 
|  | * If we need to do any I/O, try to pre-readahead extra | 
|  | * blocks from the inode table. | 
|  | */ | 
|  | if (EXT4_SB(sb)->s_inode_readahead_blks) { | 
|  | ext4_fsblk_t b, end, table; | 
|  | unsigned num; | 
|  |  | 
|  | table = ext4_inode_table(sb, gdp); | 
|  | /* s_inode_readahead_blks is always a power of 2 */ | 
|  | b = block & ~(EXT4_SB(sb)->s_inode_readahead_blks-1); | 
|  | if (table > b) | 
|  | b = table; | 
|  | end = b + EXT4_SB(sb)->s_inode_readahead_blks; | 
|  | num = EXT4_INODES_PER_GROUP(sb); | 
|  | if (EXT4_HAS_RO_COMPAT_FEATURE(sb, | 
|  | EXT4_FEATURE_RO_COMPAT_GDT_CSUM)) | 
|  | num -= ext4_itable_unused_count(sb, gdp); | 
|  | table += num / inodes_per_block; | 
|  | if (end > table) | 
|  | end = table; | 
|  | while (b <= end) | 
|  | sb_breadahead(sb, b++); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * There are other valid inodes in the buffer, this inode | 
|  | * has in-inode xattrs, or we don't have this inode in memory. | 
|  | * Read the block from disk. | 
|  | */ | 
|  | get_bh(bh); | 
|  | bh->b_end_io = end_buffer_read_sync; | 
|  | submit_bh(READ_META, bh); | 
|  | wait_on_buffer(bh); | 
|  | if (!buffer_uptodate(bh)) { | 
|  | ext4_error(sb, "unable to read inode block - inode=%lu," | 
|  | " block=%llu", inode->i_ino, block); | 
|  | brelse(bh); | 
|  | return -EIO; | 
|  | } | 
|  | } | 
|  | has_buffer: | 
|  | iloc->bh = bh; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int ext4_get_inode_loc(struct inode *inode, struct ext4_iloc *iloc) | 
|  | { | 
|  | /* We have all inode data except xattrs in memory here. */ | 
|  | return __ext4_get_inode_loc(inode, iloc, | 
|  | !ext4_test_inode_state(inode, EXT4_STATE_XATTR)); | 
|  | } | 
|  |  | 
|  | void ext4_set_inode_flags(struct inode *inode) | 
|  | { | 
|  | unsigned int flags = EXT4_I(inode)->i_flags; | 
|  |  | 
|  | inode->i_flags &= ~(S_SYNC|S_APPEND|S_IMMUTABLE|S_NOATIME|S_DIRSYNC); | 
|  | if (flags & EXT4_SYNC_FL) | 
|  | inode->i_flags |= S_SYNC; | 
|  | if (flags & EXT4_APPEND_FL) | 
|  | inode->i_flags |= S_APPEND; | 
|  | if (flags & EXT4_IMMUTABLE_FL) | 
|  | inode->i_flags |= S_IMMUTABLE; | 
|  | if (flags & EXT4_NOATIME_FL) | 
|  | inode->i_flags |= S_NOATIME; | 
|  | if (flags & EXT4_DIRSYNC_FL) | 
|  | inode->i_flags |= S_DIRSYNC; | 
|  | } | 
|  |  | 
|  | /* Propagate flags from i_flags to EXT4_I(inode)->i_flags */ | 
|  | void ext4_get_inode_flags(struct ext4_inode_info *ei) | 
|  | { | 
|  | unsigned int flags = ei->vfs_inode.i_flags; | 
|  |  | 
|  | ei->i_flags &= ~(EXT4_SYNC_FL|EXT4_APPEND_FL| | 
|  | EXT4_IMMUTABLE_FL|EXT4_NOATIME_FL|EXT4_DIRSYNC_FL); | 
|  | if (flags & S_SYNC) | 
|  | ei->i_flags |= EXT4_SYNC_FL; | 
|  | if (flags & S_APPEND) | 
|  | ei->i_flags |= EXT4_APPEND_FL; | 
|  | if (flags & S_IMMUTABLE) | 
|  | ei->i_flags |= EXT4_IMMUTABLE_FL; | 
|  | if (flags & S_NOATIME) | 
|  | ei->i_flags |= EXT4_NOATIME_FL; | 
|  | if (flags & S_DIRSYNC) | 
|  | ei->i_flags |= EXT4_DIRSYNC_FL; | 
|  | } | 
|  |  | 
|  | static blkcnt_t ext4_inode_blocks(struct ext4_inode *raw_inode, | 
|  | struct ext4_inode_info *ei) | 
|  | { | 
|  | blkcnt_t i_blocks ; | 
|  | struct inode *inode = &(ei->vfs_inode); | 
|  | struct super_block *sb = inode->i_sb; | 
|  |  | 
|  | if (EXT4_HAS_RO_COMPAT_FEATURE(sb, | 
|  | EXT4_FEATURE_RO_COMPAT_HUGE_FILE)) { | 
|  | /* we are using combined 48 bit field */ | 
|  | i_blocks = ((u64)le16_to_cpu(raw_inode->i_blocks_high)) << 32 | | 
|  | le32_to_cpu(raw_inode->i_blocks_lo); | 
|  | if (ei->i_flags & EXT4_HUGE_FILE_FL) { | 
|  | /* i_blocks represent file system block size */ | 
|  | return i_blocks  << (inode->i_blkbits - 9); | 
|  | } else { | 
|  | return i_blocks; | 
|  | } | 
|  | } else { | 
|  | return le32_to_cpu(raw_inode->i_blocks_lo); | 
|  | } | 
|  | } | 
|  |  | 
|  | struct inode *ext4_iget(struct super_block *sb, unsigned long ino) | 
|  | { | 
|  | struct ext4_iloc iloc; | 
|  | struct ext4_inode *raw_inode; | 
|  | struct ext4_inode_info *ei; | 
|  | struct inode *inode; | 
|  | journal_t *journal = EXT4_SB(sb)->s_journal; | 
|  | long ret; | 
|  | int block; | 
|  |  | 
|  | inode = iget_locked(sb, ino); | 
|  | if (!inode) | 
|  | return ERR_PTR(-ENOMEM); | 
|  | if (!(inode->i_state & I_NEW)) | 
|  | return inode; | 
|  |  | 
|  | ei = EXT4_I(inode); | 
|  | iloc.bh = 0; | 
|  |  | 
|  | ret = __ext4_get_inode_loc(inode, &iloc, 0); | 
|  | if (ret < 0) | 
|  | goto bad_inode; | 
|  | raw_inode = ext4_raw_inode(&iloc); | 
|  | inode->i_mode = le16_to_cpu(raw_inode->i_mode); | 
|  | inode->i_uid = (uid_t)le16_to_cpu(raw_inode->i_uid_low); | 
|  | inode->i_gid = (gid_t)le16_to_cpu(raw_inode->i_gid_low); | 
|  | if (!(test_opt(inode->i_sb, NO_UID32))) { | 
|  | inode->i_uid |= le16_to_cpu(raw_inode->i_uid_high) << 16; | 
|  | inode->i_gid |= le16_to_cpu(raw_inode->i_gid_high) << 16; | 
|  | } | 
|  | inode->i_nlink = le16_to_cpu(raw_inode->i_links_count); | 
|  |  | 
|  | ei->i_state_flags = 0; | 
|  | ei->i_dir_start_lookup = 0; | 
|  | ei->i_dtime = le32_to_cpu(raw_inode->i_dtime); | 
|  | /* We now have enough fields to check if the inode was active or not. | 
|  | * This is needed because nfsd might try to access dead inodes | 
|  | * the test is that same one that e2fsck uses | 
|  | * NeilBrown 1999oct15 | 
|  | */ | 
|  | if (inode->i_nlink == 0) { | 
|  | if (inode->i_mode == 0 || | 
|  | !(EXT4_SB(inode->i_sb)->s_mount_state & EXT4_ORPHAN_FS)) { | 
|  | /* this inode is deleted */ | 
|  | ret = -ESTALE; | 
|  | goto bad_inode; | 
|  | } | 
|  | /* The only unlinked inodes we let through here have | 
|  | * valid i_mode and are being read by the orphan | 
|  | * recovery code: that's fine, we're about to complete | 
|  | * the process of deleting those. */ | 
|  | } | 
|  | ei->i_flags = le32_to_cpu(raw_inode->i_flags); | 
|  | inode->i_blocks = ext4_inode_blocks(raw_inode, ei); | 
|  | ei->i_file_acl = le32_to_cpu(raw_inode->i_file_acl_lo); | 
|  | if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_64BIT)) | 
|  | ei->i_file_acl |= | 
|  | ((__u64)le16_to_cpu(raw_inode->i_file_acl_high)) << 32; | 
|  | inode->i_size = ext4_isize(raw_inode); | 
|  | ei->i_disksize = inode->i_size; | 
|  | #ifdef CONFIG_QUOTA | 
|  | ei->i_reserved_quota = 0; | 
|  | #endif | 
|  | inode->i_generation = le32_to_cpu(raw_inode->i_generation); | 
|  | ei->i_block_group = iloc.block_group; | 
|  | ei->i_last_alloc_group = ~0; | 
|  | /* | 
|  | * NOTE! The in-memory inode i_data array is in little-endian order | 
|  | * even on big-endian machines: we do NOT byteswap the block numbers! | 
|  | */ | 
|  | for (block = 0; block < EXT4_N_BLOCKS; block++) | 
|  | ei->i_data[block] = raw_inode->i_block[block]; | 
|  | INIT_LIST_HEAD(&ei->i_orphan); | 
|  |  | 
|  | /* | 
|  | * Set transaction id's of transactions that have to be committed | 
|  | * to finish f[data]sync. We set them to currently running transaction | 
|  | * as we cannot be sure that the inode or some of its metadata isn't | 
|  | * part of the transaction - the inode could have been reclaimed and | 
|  | * now it is reread from disk. | 
|  | */ | 
|  | if (journal) { | 
|  | transaction_t *transaction; | 
|  | tid_t tid; | 
|  |  | 
|  | spin_lock(&journal->j_state_lock); | 
|  | if (journal->j_running_transaction) | 
|  | transaction = journal->j_running_transaction; | 
|  | else | 
|  | transaction = journal->j_committing_transaction; | 
|  | if (transaction) | 
|  | tid = transaction->t_tid; | 
|  | else | 
|  | tid = journal->j_commit_sequence; | 
|  | spin_unlock(&journal->j_state_lock); | 
|  | ei->i_sync_tid = tid; | 
|  | ei->i_datasync_tid = tid; | 
|  | } | 
|  |  | 
|  | if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE) { | 
|  | ei->i_extra_isize = le16_to_cpu(raw_inode->i_extra_isize); | 
|  | if (EXT4_GOOD_OLD_INODE_SIZE + ei->i_extra_isize > | 
|  | EXT4_INODE_SIZE(inode->i_sb)) { | 
|  | ret = -EIO; | 
|  | goto bad_inode; | 
|  | } | 
|  | if (ei->i_extra_isize == 0) { | 
|  | /* The extra space is currently unused. Use it. */ | 
|  | ei->i_extra_isize = sizeof(struct ext4_inode) - | 
|  | EXT4_GOOD_OLD_INODE_SIZE; | 
|  | } else { | 
|  | __le32 *magic = (void *)raw_inode + | 
|  | EXT4_GOOD_OLD_INODE_SIZE + | 
|  | ei->i_extra_isize; | 
|  | if (*magic == cpu_to_le32(EXT4_XATTR_MAGIC)) | 
|  | ext4_set_inode_state(inode, EXT4_STATE_XATTR); | 
|  | } | 
|  | } else | 
|  | ei->i_extra_isize = 0; | 
|  |  | 
|  | EXT4_INODE_GET_XTIME(i_ctime, inode, raw_inode); | 
|  | EXT4_INODE_GET_XTIME(i_mtime, inode, raw_inode); | 
|  | EXT4_INODE_GET_XTIME(i_atime, inode, raw_inode); | 
|  | EXT4_EINODE_GET_XTIME(i_crtime, ei, raw_inode); | 
|  |  | 
|  | inode->i_version = le32_to_cpu(raw_inode->i_disk_version); | 
|  | if (EXT4_INODE_SIZE(inode->i_sb) > EXT4_GOOD_OLD_INODE_SIZE) { | 
|  | if (EXT4_FITS_IN_INODE(raw_inode, ei, i_version_hi)) | 
|  | inode->i_version |= | 
|  | (__u64)(le32_to_cpu(raw_inode->i_version_hi)) << 32; | 
|  | } | 
|  |  | 
|  | ret = 0; | 
|  | if (ei->i_file_acl && | 
|  | !ext4_data_block_valid(EXT4_SB(sb), ei->i_file_acl, 1)) { | 
|  | ext4_error(sb, "bad extended attribute block %llu inode #%lu", | 
|  | ei->i_file_acl, inode->i_ino); | 
|  | ret = -EIO; | 
|  | goto bad_inode; | 
|  | } else if (ei->i_flags & EXT4_EXTENTS_FL) { | 
|  | if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) || | 
|  | (S_ISLNK(inode->i_mode) && | 
|  | !ext4_inode_is_fast_symlink(inode))) | 
|  | /* Validate extent which is part of inode */ | 
|  | ret = ext4_ext_check_inode(inode); | 
|  | } else if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) || | 
|  | (S_ISLNK(inode->i_mode) && | 
|  | !ext4_inode_is_fast_symlink(inode))) { | 
|  | /* Validate block references which are part of inode */ | 
|  | ret = ext4_check_inode_blockref(inode); | 
|  | } | 
|  | if (ret) | 
|  | goto bad_inode; | 
|  |  | 
|  | if (S_ISREG(inode->i_mode)) { | 
|  | inode->i_op = &ext4_file_inode_operations; | 
|  | inode->i_fop = &ext4_file_operations; | 
|  | ext4_set_aops(inode); | 
|  | } else if (S_ISDIR(inode->i_mode)) { | 
|  | inode->i_op = &ext4_dir_inode_operations; | 
|  | inode->i_fop = &ext4_dir_operations; | 
|  | } else if (S_ISLNK(inode->i_mode)) { | 
|  | if (ext4_inode_is_fast_symlink(inode)) { | 
|  | inode->i_op = &ext4_fast_symlink_inode_operations; | 
|  | nd_terminate_link(ei->i_data, inode->i_size, | 
|  | sizeof(ei->i_data) - 1); | 
|  | } else { | 
|  | inode->i_op = &ext4_symlink_inode_operations; | 
|  | ext4_set_aops(inode); | 
|  | } | 
|  | } else if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode) || | 
|  | S_ISFIFO(inode->i_mode) || S_ISSOCK(inode->i_mode)) { | 
|  | inode->i_op = &ext4_special_inode_operations; | 
|  | if (raw_inode->i_block[0]) | 
|  | init_special_inode(inode, inode->i_mode, | 
|  | old_decode_dev(le32_to_cpu(raw_inode->i_block[0]))); | 
|  | else | 
|  | init_special_inode(inode, inode->i_mode, | 
|  | new_decode_dev(le32_to_cpu(raw_inode->i_block[1]))); | 
|  | } else { | 
|  | ret = -EIO; | 
|  | ext4_error(inode->i_sb, "bogus i_mode (%o) for inode=%lu", | 
|  | inode->i_mode, inode->i_ino); | 
|  | goto bad_inode; | 
|  | } | 
|  | brelse(iloc.bh); | 
|  | ext4_set_inode_flags(inode); | 
|  | unlock_new_inode(inode); | 
|  | return inode; | 
|  |  | 
|  | bad_inode: | 
|  | brelse(iloc.bh); | 
|  | iget_failed(inode); | 
|  | return ERR_PTR(ret); | 
|  | } | 
|  |  | 
|  | static int ext4_inode_blocks_set(handle_t *handle, | 
|  | struct ext4_inode *raw_inode, | 
|  | struct ext4_inode_info *ei) | 
|  | { | 
|  | struct inode *inode = &(ei->vfs_inode); | 
|  | u64 i_blocks = inode->i_blocks; | 
|  | struct super_block *sb = inode->i_sb; | 
|  |  | 
|  | if (i_blocks <= ~0U) { | 
|  | /* | 
|  | * i_blocks can be represnted in a 32 bit variable | 
|  | * as multiple of 512 bytes | 
|  | */ | 
|  | raw_inode->i_blocks_lo   = cpu_to_le32(i_blocks); | 
|  | raw_inode->i_blocks_high = 0; | 
|  | ei->i_flags &= ~EXT4_HUGE_FILE_FL; | 
|  | return 0; | 
|  | } | 
|  | if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_HUGE_FILE)) | 
|  | return -EFBIG; | 
|  |  | 
|  | if (i_blocks <= 0xffffffffffffULL) { | 
|  | /* | 
|  | * i_blocks can be represented in a 48 bit variable | 
|  | * as multiple of 512 bytes | 
|  | */ | 
|  | raw_inode->i_blocks_lo   = cpu_to_le32(i_blocks); | 
|  | raw_inode->i_blocks_high = cpu_to_le16(i_blocks >> 32); | 
|  | ei->i_flags &= ~EXT4_HUGE_FILE_FL; | 
|  | } else { | 
|  | ei->i_flags |= EXT4_HUGE_FILE_FL; | 
|  | /* i_block is stored in file system block size */ | 
|  | i_blocks = i_blocks >> (inode->i_blkbits - 9); | 
|  | raw_inode->i_blocks_lo   = cpu_to_le32(i_blocks); | 
|  | raw_inode->i_blocks_high = cpu_to_le16(i_blocks >> 32); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Post the struct inode info into an on-disk inode location in the | 
|  | * buffer-cache.  This gobbles the caller's reference to the | 
|  | * buffer_head in the inode location struct. | 
|  | * | 
|  | * The caller must have write access to iloc->bh. | 
|  | */ | 
|  | static int ext4_do_update_inode(handle_t *handle, | 
|  | struct inode *inode, | 
|  | struct ext4_iloc *iloc) | 
|  | { | 
|  | struct ext4_inode *raw_inode = ext4_raw_inode(iloc); | 
|  | struct ext4_inode_info *ei = EXT4_I(inode); | 
|  | struct buffer_head *bh = iloc->bh; | 
|  | int err = 0, rc, block; | 
|  |  | 
|  | /* For fields not not tracking in the in-memory inode, | 
|  | * initialise them to zero for new inodes. */ | 
|  | if (ext4_test_inode_state(inode, EXT4_STATE_NEW)) | 
|  | memset(raw_inode, 0, EXT4_SB(inode->i_sb)->s_inode_size); | 
|  |  | 
|  | ext4_get_inode_flags(ei); | 
|  | raw_inode->i_mode = cpu_to_le16(inode->i_mode); | 
|  | if (!(test_opt(inode->i_sb, NO_UID32))) { | 
|  | raw_inode->i_uid_low = cpu_to_le16(low_16_bits(inode->i_uid)); | 
|  | raw_inode->i_gid_low = cpu_to_le16(low_16_bits(inode->i_gid)); | 
|  | /* | 
|  | * Fix up interoperability with old kernels. Otherwise, old inodes get | 
|  | * re-used with the upper 16 bits of the uid/gid intact | 
|  | */ | 
|  | if (!ei->i_dtime) { | 
|  | raw_inode->i_uid_high = | 
|  | cpu_to_le16(high_16_bits(inode->i_uid)); | 
|  | raw_inode->i_gid_high = | 
|  | cpu_to_le16(high_16_bits(inode->i_gid)); | 
|  | } else { | 
|  | raw_inode->i_uid_high = 0; | 
|  | raw_inode->i_gid_high = 0; | 
|  | } | 
|  | } else { | 
|  | raw_inode->i_uid_low = | 
|  | cpu_to_le16(fs_high2lowuid(inode->i_uid)); | 
|  | raw_inode->i_gid_low = | 
|  | cpu_to_le16(fs_high2lowgid(inode->i_gid)); | 
|  | raw_inode->i_uid_high = 0; | 
|  | raw_inode->i_gid_high = 0; | 
|  | } | 
|  | raw_inode->i_links_count = cpu_to_le16(inode->i_nlink); | 
|  |  | 
|  | EXT4_INODE_SET_XTIME(i_ctime, inode, raw_inode); | 
|  | EXT4_INODE_SET_XTIME(i_mtime, inode, raw_inode); | 
|  | EXT4_INODE_SET_XTIME(i_atime, inode, raw_inode); | 
|  | EXT4_EINODE_SET_XTIME(i_crtime, ei, raw_inode); | 
|  |  | 
|  | if (ext4_inode_blocks_set(handle, raw_inode, ei)) | 
|  | goto out_brelse; | 
|  | raw_inode->i_dtime = cpu_to_le32(ei->i_dtime); | 
|  | raw_inode->i_flags = cpu_to_le32(ei->i_flags); | 
|  | if (EXT4_SB(inode->i_sb)->s_es->s_creator_os != | 
|  | cpu_to_le32(EXT4_OS_HURD)) | 
|  | raw_inode->i_file_acl_high = | 
|  | cpu_to_le16(ei->i_file_acl >> 32); | 
|  | raw_inode->i_file_acl_lo = cpu_to_le32(ei->i_file_acl); | 
|  | ext4_isize_set(raw_inode, ei->i_disksize); | 
|  | if (ei->i_disksize > 0x7fffffffULL) { | 
|  | struct super_block *sb = inode->i_sb; | 
|  | if (!EXT4_HAS_RO_COMPAT_FEATURE(sb, | 
|  | EXT4_FEATURE_RO_COMPAT_LARGE_FILE) || | 
|  | EXT4_SB(sb)->s_es->s_rev_level == | 
|  | cpu_to_le32(EXT4_GOOD_OLD_REV)) { | 
|  | /* If this is the first large file | 
|  | * created, add a flag to the superblock. | 
|  | */ | 
|  | err = ext4_journal_get_write_access(handle, | 
|  | EXT4_SB(sb)->s_sbh); | 
|  | if (err) | 
|  | goto out_brelse; | 
|  | ext4_update_dynamic_rev(sb); | 
|  | EXT4_SET_RO_COMPAT_FEATURE(sb, | 
|  | EXT4_FEATURE_RO_COMPAT_LARGE_FILE); | 
|  | sb->s_dirt = 1; | 
|  | ext4_handle_sync(handle); | 
|  | err = ext4_handle_dirty_metadata(handle, NULL, | 
|  | EXT4_SB(sb)->s_sbh); | 
|  | } | 
|  | } | 
|  | raw_inode->i_generation = cpu_to_le32(inode->i_generation); | 
|  | if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode)) { | 
|  | if (old_valid_dev(inode->i_rdev)) { | 
|  | raw_inode->i_block[0] = | 
|  | cpu_to_le32(old_encode_dev(inode->i_rdev)); | 
|  | raw_inode->i_block[1] = 0; | 
|  | } else { | 
|  | raw_inode->i_block[0] = 0; | 
|  | raw_inode->i_block[1] = | 
|  | cpu_to_le32(new_encode_dev(inode->i_rdev)); | 
|  | raw_inode->i_block[2] = 0; | 
|  | } | 
|  | } else | 
|  | for (block = 0; block < EXT4_N_BLOCKS; block++) | 
|  | raw_inode->i_block[block] = ei->i_data[block]; | 
|  |  | 
|  | raw_inode->i_disk_version = cpu_to_le32(inode->i_version); | 
|  | if (ei->i_extra_isize) { | 
|  | if (EXT4_FITS_IN_INODE(raw_inode, ei, i_version_hi)) | 
|  | raw_inode->i_version_hi = | 
|  | cpu_to_le32(inode->i_version >> 32); | 
|  | raw_inode->i_extra_isize = cpu_to_le16(ei->i_extra_isize); | 
|  | } | 
|  |  | 
|  | BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata"); | 
|  | rc = ext4_handle_dirty_metadata(handle, NULL, bh); | 
|  | if (!err) | 
|  | err = rc; | 
|  | ext4_clear_inode_state(inode, EXT4_STATE_NEW); | 
|  |  | 
|  | ext4_update_inode_fsync_trans(handle, inode, 0); | 
|  | out_brelse: | 
|  | brelse(bh); | 
|  | ext4_std_error(inode->i_sb, err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * ext4_write_inode() | 
|  | * | 
|  | * We are called from a few places: | 
|  | * | 
|  | * - Within generic_file_write() for O_SYNC files. | 
|  | *   Here, there will be no transaction running. We wait for any running | 
|  | *   trasnaction to commit. | 
|  | * | 
|  | * - Within sys_sync(), kupdate and such. | 
|  | *   We wait on commit, if tol to. | 
|  | * | 
|  | * - Within prune_icache() (PF_MEMALLOC == true) | 
|  | *   Here we simply return.  We can't afford to block kswapd on the | 
|  | *   journal commit. | 
|  | * | 
|  | * In all cases it is actually safe for us to return without doing anything, | 
|  | * because the inode has been copied into a raw inode buffer in | 
|  | * ext4_mark_inode_dirty().  This is a correctness thing for O_SYNC and for | 
|  | * knfsd. | 
|  | * | 
|  | * Note that we are absolutely dependent upon all inode dirtiers doing the | 
|  | * right thing: they *must* call mark_inode_dirty() after dirtying info in | 
|  | * which we are interested. | 
|  | * | 
|  | * It would be a bug for them to not do this.  The code: | 
|  | * | 
|  | *	mark_inode_dirty(inode) | 
|  | *	stuff(); | 
|  | *	inode->i_size = expr; | 
|  | * | 
|  | * is in error because a kswapd-driven write_inode() could occur while | 
|  | * `stuff()' is running, and the new i_size will be lost.  Plus the inode | 
|  | * will no longer be on the superblock's dirty inode list. | 
|  | */ | 
|  | int ext4_write_inode(struct inode *inode, struct writeback_control *wbc) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | if (current->flags & PF_MEMALLOC) | 
|  | return 0; | 
|  |  | 
|  | if (EXT4_SB(inode->i_sb)->s_journal) { | 
|  | if (ext4_journal_current_handle()) { | 
|  | jbd_debug(1, "called recursively, non-PF_MEMALLOC!\n"); | 
|  | dump_stack(); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | if (wbc->sync_mode != WB_SYNC_ALL) | 
|  | return 0; | 
|  |  | 
|  | err = ext4_force_commit(inode->i_sb); | 
|  | } else { | 
|  | struct ext4_iloc iloc; | 
|  |  | 
|  | err = ext4_get_inode_loc(inode, &iloc); | 
|  | if (err) | 
|  | return err; | 
|  | if (wbc->sync_mode == WB_SYNC_ALL) | 
|  | sync_dirty_buffer(iloc.bh); | 
|  | if (buffer_req(iloc.bh) && !buffer_uptodate(iloc.bh)) { | 
|  | ext4_error(inode->i_sb, "IO error syncing inode, " | 
|  | "inode=%lu, block=%llu", inode->i_ino, | 
|  | (unsigned long long)iloc.bh->b_blocknr); | 
|  | err = -EIO; | 
|  | } | 
|  | } | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * ext4_setattr() | 
|  | * | 
|  | * Called from notify_change. | 
|  | * | 
|  | * We want to trap VFS attempts to truncate the file as soon as | 
|  | * possible.  In particular, we want to make sure that when the VFS | 
|  | * shrinks i_size, we put the inode on the orphan list and modify | 
|  | * i_disksize immediately, so that during the subsequent flushing of | 
|  | * dirty pages and freeing of disk blocks, we can guarantee that any | 
|  | * commit will leave the blocks being flushed in an unused state on | 
|  | * disk.  (On recovery, the inode will get truncated and the blocks will | 
|  | * be freed, so we have a strong guarantee that no future commit will | 
|  | * leave these blocks visible to the user.) | 
|  | * | 
|  | * Another thing we have to assure is that if we are in ordered mode | 
|  | * and inode is still attached to the committing transaction, we must | 
|  | * we start writeout of all the dirty pages which are being truncated. | 
|  | * This way we are sure that all the data written in the previous | 
|  | * transaction are already on disk (truncate waits for pages under | 
|  | * writeback). | 
|  | * | 
|  | * Called with inode->i_mutex down. | 
|  | */ | 
|  | int ext4_setattr(struct dentry *dentry, struct iattr *attr) | 
|  | { | 
|  | struct inode *inode = dentry->d_inode; | 
|  | int error, rc = 0; | 
|  | const unsigned int ia_valid = attr->ia_valid; | 
|  |  | 
|  | error = inode_change_ok(inode, attr); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | if (ia_valid & ATTR_SIZE) | 
|  | dquot_initialize(inode); | 
|  | if ((ia_valid & ATTR_UID && attr->ia_uid != inode->i_uid) || | 
|  | (ia_valid & ATTR_GID && attr->ia_gid != inode->i_gid)) { | 
|  | handle_t *handle; | 
|  |  | 
|  | /* (user+group)*(old+new) structure, inode write (sb, | 
|  | * inode block, ? - but truncate inode update has it) */ | 
|  | handle = ext4_journal_start(inode, (EXT4_MAXQUOTAS_INIT_BLOCKS(inode->i_sb)+ | 
|  | EXT4_MAXQUOTAS_DEL_BLOCKS(inode->i_sb))+3); | 
|  | if (IS_ERR(handle)) { | 
|  | error = PTR_ERR(handle); | 
|  | goto err_out; | 
|  | } | 
|  | error = dquot_transfer(inode, attr); | 
|  | if (error) { | 
|  | ext4_journal_stop(handle); | 
|  | return error; | 
|  | } | 
|  | /* Update corresponding info in inode so that everything is in | 
|  | * one transaction */ | 
|  | if (attr->ia_valid & ATTR_UID) | 
|  | inode->i_uid = attr->ia_uid; | 
|  | if (attr->ia_valid & ATTR_GID) | 
|  | inode->i_gid = attr->ia_gid; | 
|  | error = ext4_mark_inode_dirty(handle, inode); | 
|  | ext4_journal_stop(handle); | 
|  | } | 
|  |  | 
|  | if (attr->ia_valid & ATTR_SIZE) { | 
|  | if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)) { | 
|  | struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | 
|  |  | 
|  | if (attr->ia_size > sbi->s_bitmap_maxbytes) { | 
|  | error = -EFBIG; | 
|  | goto err_out; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | if (S_ISREG(inode->i_mode) && | 
|  | attr->ia_valid & ATTR_SIZE && | 
|  | (attr->ia_size < inode->i_size || | 
|  | (EXT4_I(inode)->i_flags & EXT4_EOFBLOCKS_FL))) { | 
|  | handle_t *handle; | 
|  |  | 
|  | handle = ext4_journal_start(inode, 3); | 
|  | if (IS_ERR(handle)) { | 
|  | error = PTR_ERR(handle); | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | error = ext4_orphan_add(handle, inode); | 
|  | EXT4_I(inode)->i_disksize = attr->ia_size; | 
|  | rc = ext4_mark_inode_dirty(handle, inode); | 
|  | if (!error) | 
|  | error = rc; | 
|  | ext4_journal_stop(handle); | 
|  |  | 
|  | if (ext4_should_order_data(inode)) { | 
|  | error = ext4_begin_ordered_truncate(inode, | 
|  | attr->ia_size); | 
|  | if (error) { | 
|  | /* Do as much error cleanup as possible */ | 
|  | handle = ext4_journal_start(inode, 3); | 
|  | if (IS_ERR(handle)) { | 
|  | ext4_orphan_del(NULL, inode); | 
|  | goto err_out; | 
|  | } | 
|  | ext4_orphan_del(handle, inode); | 
|  | ext4_journal_stop(handle); | 
|  | goto err_out; | 
|  | } | 
|  | } | 
|  | /* ext4_truncate will clear the flag */ | 
|  | if ((EXT4_I(inode)->i_flags & EXT4_EOFBLOCKS_FL)) | 
|  | ext4_truncate(inode); | 
|  | } | 
|  |  | 
|  | rc = inode_setattr(inode, attr); | 
|  |  | 
|  | /* If inode_setattr's call to ext4_truncate failed to get a | 
|  | * transaction handle at all, we need to clean up the in-core | 
|  | * orphan list manually. */ | 
|  | if (inode->i_nlink) | 
|  | ext4_orphan_del(NULL, inode); | 
|  |  | 
|  | if (!rc && (ia_valid & ATTR_MODE)) | 
|  | rc = ext4_acl_chmod(inode); | 
|  |  | 
|  | err_out: | 
|  | ext4_std_error(inode->i_sb, error); | 
|  | if (!error) | 
|  | error = rc; | 
|  | return error; | 
|  | } | 
|  |  | 
|  | int ext4_getattr(struct vfsmount *mnt, struct dentry *dentry, | 
|  | struct kstat *stat) | 
|  | { | 
|  | struct inode *inode; | 
|  | unsigned long delalloc_blocks; | 
|  |  | 
|  | inode = dentry->d_inode; | 
|  | generic_fillattr(inode, stat); | 
|  |  | 
|  | /* | 
|  | * We can't update i_blocks if the block allocation is delayed | 
|  | * otherwise in the case of system crash before the real block | 
|  | * allocation is done, we will have i_blocks inconsistent with | 
|  | * on-disk file blocks. | 
|  | * We always keep i_blocks updated together with real | 
|  | * allocation. But to not confuse with user, stat | 
|  | * will return the blocks that include the delayed allocation | 
|  | * blocks for this file. | 
|  | */ | 
|  | spin_lock(&EXT4_I(inode)->i_block_reservation_lock); | 
|  | delalloc_blocks = EXT4_I(inode)->i_reserved_data_blocks; | 
|  | spin_unlock(&EXT4_I(inode)->i_block_reservation_lock); | 
|  |  | 
|  | stat->blocks += (delalloc_blocks << inode->i_sb->s_blocksize_bits)>>9; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ext4_indirect_trans_blocks(struct inode *inode, int nrblocks, | 
|  | int chunk) | 
|  | { | 
|  | int indirects; | 
|  |  | 
|  | /* if nrblocks are contiguous */ | 
|  | if (chunk) { | 
|  | /* | 
|  | * With N contiguous data blocks, it need at most | 
|  | * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) indirect blocks | 
|  | * 2 dindirect blocks | 
|  | * 1 tindirect block | 
|  | */ | 
|  | indirects = nrblocks / EXT4_ADDR_PER_BLOCK(inode->i_sb); | 
|  | return indirects + 3; | 
|  | } | 
|  | /* | 
|  | * if nrblocks are not contiguous, worse case, each block touch | 
|  | * a indirect block, and each indirect block touch a double indirect | 
|  | * block, plus a triple indirect block | 
|  | */ | 
|  | indirects = nrblocks * 2 + 1; | 
|  | return indirects; | 
|  | } | 
|  |  | 
|  | static int ext4_index_trans_blocks(struct inode *inode, int nrblocks, int chunk) | 
|  | { | 
|  | if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)) | 
|  | return ext4_indirect_trans_blocks(inode, nrblocks, chunk); | 
|  | return ext4_ext_index_trans_blocks(inode, nrblocks, chunk); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Account for index blocks, block groups bitmaps and block group | 
|  | * descriptor blocks if modify datablocks and index blocks | 
|  | * worse case, the indexs blocks spread over different block groups | 
|  | * | 
|  | * If datablocks are discontiguous, they are possible to spread over | 
|  | * different block groups too. If they are contiuguous, with flexbg, | 
|  | * they could still across block group boundary. | 
|  | * | 
|  | * Also account for superblock, inode, quota and xattr blocks | 
|  | */ | 
|  | int ext4_meta_trans_blocks(struct inode *inode, int nrblocks, int chunk) | 
|  | { | 
|  | ext4_group_t groups, ngroups = ext4_get_groups_count(inode->i_sb); | 
|  | int gdpblocks; | 
|  | int idxblocks; | 
|  | int ret = 0; | 
|  |  | 
|  | /* | 
|  | * How many index blocks need to touch to modify nrblocks? | 
|  | * The "Chunk" flag indicating whether the nrblocks is | 
|  | * physically contiguous on disk | 
|  | * | 
|  | * For Direct IO and fallocate, they calls get_block to allocate | 
|  | * one single extent at a time, so they could set the "Chunk" flag | 
|  | */ | 
|  | idxblocks = ext4_index_trans_blocks(inode, nrblocks, chunk); | 
|  |  | 
|  | ret = idxblocks; | 
|  |  | 
|  | /* | 
|  | * Now let's see how many group bitmaps and group descriptors need | 
|  | * to account | 
|  | */ | 
|  | groups = idxblocks; | 
|  | if (chunk) | 
|  | groups += 1; | 
|  | else | 
|  | groups += nrblocks; | 
|  |  | 
|  | gdpblocks = groups; | 
|  | if (groups > ngroups) | 
|  | groups = ngroups; | 
|  | if (groups > EXT4_SB(inode->i_sb)->s_gdb_count) | 
|  | gdpblocks = EXT4_SB(inode->i_sb)->s_gdb_count; | 
|  |  | 
|  | /* bitmaps and block group descriptor blocks */ | 
|  | ret += groups + gdpblocks; | 
|  |  | 
|  | /* Blocks for super block, inode, quota and xattr blocks */ | 
|  | ret += EXT4_META_TRANS_BLOCKS(inode->i_sb); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Calulate the total number of credits to reserve to fit | 
|  | * the modification of a single pages into a single transaction, | 
|  | * which may include multiple chunks of block allocations. | 
|  | * | 
|  | * This could be called via ext4_write_begin() | 
|  | * | 
|  | * We need to consider the worse case, when | 
|  | * one new block per extent. | 
|  | */ | 
|  | int ext4_writepage_trans_blocks(struct inode *inode) | 
|  | { | 
|  | int bpp = ext4_journal_blocks_per_page(inode); | 
|  | int ret; | 
|  |  | 
|  | ret = ext4_meta_trans_blocks(inode, bpp, 0); | 
|  |  | 
|  | /* Account for data blocks for journalled mode */ | 
|  | if (ext4_should_journal_data(inode)) | 
|  | ret += bpp; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Calculate the journal credits for a chunk of data modification. | 
|  | * | 
|  | * This is called from DIO, fallocate or whoever calling | 
|  | * ext4_get_blocks() to map/allocate a chunk of contiguous disk blocks. | 
|  | * | 
|  | * journal buffers for data blocks are not included here, as DIO | 
|  | * and fallocate do no need to journal data buffers. | 
|  | */ | 
|  | int ext4_chunk_trans_blocks(struct inode *inode, int nrblocks) | 
|  | { | 
|  | return ext4_meta_trans_blocks(inode, nrblocks, 1); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The caller must have previously called ext4_reserve_inode_write(). | 
|  | * Give this, we know that the caller already has write access to iloc->bh. | 
|  | */ | 
|  | int ext4_mark_iloc_dirty(handle_t *handle, | 
|  | struct inode *inode, struct ext4_iloc *iloc) | 
|  | { | 
|  | int err = 0; | 
|  |  | 
|  | if (test_opt(inode->i_sb, I_VERSION)) | 
|  | inode_inc_iversion(inode); | 
|  |  | 
|  | /* the do_update_inode consumes one bh->b_count */ | 
|  | get_bh(iloc->bh); | 
|  |  | 
|  | /* ext4_do_update_inode() does jbd2_journal_dirty_metadata */ | 
|  | err = ext4_do_update_inode(handle, inode, iloc); | 
|  | put_bh(iloc->bh); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * On success, We end up with an outstanding reference count against | 
|  | * iloc->bh.  This _must_ be cleaned up later. | 
|  | */ | 
|  |  | 
|  | int | 
|  | ext4_reserve_inode_write(handle_t *handle, struct inode *inode, | 
|  | struct ext4_iloc *iloc) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | err = ext4_get_inode_loc(inode, iloc); | 
|  | if (!err) { | 
|  | BUFFER_TRACE(iloc->bh, "get_write_access"); | 
|  | err = ext4_journal_get_write_access(handle, iloc->bh); | 
|  | if (err) { | 
|  | brelse(iloc->bh); | 
|  | iloc->bh = NULL; | 
|  | } | 
|  | } | 
|  | ext4_std_error(inode->i_sb, err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Expand an inode by new_extra_isize bytes. | 
|  | * Returns 0 on success or negative error number on failure. | 
|  | */ | 
|  | static int ext4_expand_extra_isize(struct inode *inode, | 
|  | unsigned int new_extra_isize, | 
|  | struct ext4_iloc iloc, | 
|  | handle_t *handle) | 
|  | { | 
|  | struct ext4_inode *raw_inode; | 
|  | struct ext4_xattr_ibody_header *header; | 
|  | struct ext4_xattr_entry *entry; | 
|  |  | 
|  | if (EXT4_I(inode)->i_extra_isize >= new_extra_isize) | 
|  | return 0; | 
|  |  | 
|  | raw_inode = ext4_raw_inode(&iloc); | 
|  |  | 
|  | header = IHDR(inode, raw_inode); | 
|  | entry = IFIRST(header); | 
|  |  | 
|  | /* No extended attributes present */ | 
|  | if (!ext4_test_inode_state(inode, EXT4_STATE_XATTR) || | 
|  | header->h_magic != cpu_to_le32(EXT4_XATTR_MAGIC)) { | 
|  | memset((void *)raw_inode + EXT4_GOOD_OLD_INODE_SIZE, 0, | 
|  | new_extra_isize); | 
|  | EXT4_I(inode)->i_extra_isize = new_extra_isize; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* try to expand with EAs present */ | 
|  | return ext4_expand_extra_isize_ea(inode, new_extra_isize, | 
|  | raw_inode, handle); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * What we do here is to mark the in-core inode as clean with respect to inode | 
|  | * dirtiness (it may still be data-dirty). | 
|  | * This means that the in-core inode may be reaped by prune_icache | 
|  | * without having to perform any I/O.  This is a very good thing, | 
|  | * because *any* task may call prune_icache - even ones which | 
|  | * have a transaction open against a different journal. | 
|  | * | 
|  | * Is this cheating?  Not really.  Sure, we haven't written the | 
|  | * inode out, but prune_icache isn't a user-visible syncing function. | 
|  | * Whenever the user wants stuff synced (sys_sync, sys_msync, sys_fsync) | 
|  | * we start and wait on commits. | 
|  | * | 
|  | * Is this efficient/effective?  Well, we're being nice to the system | 
|  | * by cleaning up our inodes proactively so they can be reaped | 
|  | * without I/O.  But we are potentially leaving up to five seconds' | 
|  | * worth of inodes floating about which prune_icache wants us to | 
|  | * write out.  One way to fix that would be to get prune_icache() | 
|  | * to do a write_super() to free up some memory.  It has the desired | 
|  | * effect. | 
|  | */ | 
|  | int ext4_mark_inode_dirty(handle_t *handle, struct inode *inode) | 
|  | { | 
|  | struct ext4_iloc iloc; | 
|  | struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); | 
|  | static unsigned int mnt_count; | 
|  | int err, ret; | 
|  |  | 
|  | might_sleep(); | 
|  | err = ext4_reserve_inode_write(handle, inode, &iloc); | 
|  | if (ext4_handle_valid(handle) && | 
|  | EXT4_I(inode)->i_extra_isize < sbi->s_want_extra_isize && | 
|  | !ext4_test_inode_state(inode, EXT4_STATE_NO_EXPAND)) { | 
|  | /* | 
|  | * We need extra buffer credits since we may write into EA block | 
|  | * with this same handle. If journal_extend fails, then it will | 
|  | * only result in a minor loss of functionality for that inode. | 
|  | * If this is felt to be critical, then e2fsck should be run to | 
|  | * force a large enough s_min_extra_isize. | 
|  | */ | 
|  | if ((jbd2_journal_extend(handle, | 
|  | EXT4_DATA_TRANS_BLOCKS(inode->i_sb))) == 0) { | 
|  | ret = ext4_expand_extra_isize(inode, | 
|  | sbi->s_want_extra_isize, | 
|  | iloc, handle); | 
|  | if (ret) { | 
|  | ext4_set_inode_state(inode, | 
|  | EXT4_STATE_NO_EXPAND); | 
|  | if (mnt_count != | 
|  | le16_to_cpu(sbi->s_es->s_mnt_count)) { | 
|  | ext4_warning(inode->i_sb, | 
|  | "Unable to expand inode %lu. Delete" | 
|  | " some EAs or run e2fsck.", | 
|  | inode->i_ino); | 
|  | mnt_count = | 
|  | le16_to_cpu(sbi->s_es->s_mnt_count); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  | if (!err) | 
|  | err = ext4_mark_iloc_dirty(handle, inode, &iloc); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * ext4_dirty_inode() is called from __mark_inode_dirty() | 
|  | * | 
|  | * We're really interested in the case where a file is being extended. | 
|  | * i_size has been changed by generic_commit_write() and we thus need | 
|  | * to include the updated inode in the current transaction. | 
|  | * | 
|  | * Also, dquot_alloc_block() will always dirty the inode when blocks | 
|  | * are allocated to the file. | 
|  | * | 
|  | * If the inode is marked synchronous, we don't honour that here - doing | 
|  | * so would cause a commit on atime updates, which we don't bother doing. | 
|  | * We handle synchronous inodes at the highest possible level. | 
|  | */ | 
|  | void ext4_dirty_inode(struct inode *inode) | 
|  | { | 
|  | handle_t *handle; | 
|  |  | 
|  | handle = ext4_journal_start(inode, 2); | 
|  | if (IS_ERR(handle)) | 
|  | goto out; | 
|  |  | 
|  | ext4_mark_inode_dirty(handle, inode); | 
|  |  | 
|  | ext4_journal_stop(handle); | 
|  | out: | 
|  | return; | 
|  | } | 
|  |  | 
|  | #if 0 | 
|  | /* | 
|  | * Bind an inode's backing buffer_head into this transaction, to prevent | 
|  | * it from being flushed to disk early.  Unlike | 
|  | * ext4_reserve_inode_write, this leaves behind no bh reference and | 
|  | * returns no iloc structure, so the caller needs to repeat the iloc | 
|  | * lookup to mark the inode dirty later. | 
|  | */ | 
|  | static int ext4_pin_inode(handle_t *handle, struct inode *inode) | 
|  | { | 
|  | struct ext4_iloc iloc; | 
|  |  | 
|  | int err = 0; | 
|  | if (handle) { | 
|  | err = ext4_get_inode_loc(inode, &iloc); | 
|  | if (!err) { | 
|  | BUFFER_TRACE(iloc.bh, "get_write_access"); | 
|  | err = jbd2_journal_get_write_access(handle, iloc.bh); | 
|  | if (!err) | 
|  | err = ext4_handle_dirty_metadata(handle, | 
|  | NULL, | 
|  | iloc.bh); | 
|  | brelse(iloc.bh); | 
|  | } | 
|  | } | 
|  | ext4_std_error(inode->i_sb, err); | 
|  | return err; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | int ext4_change_inode_journal_flag(struct inode *inode, int val) | 
|  | { | 
|  | journal_t *journal; | 
|  | handle_t *handle; | 
|  | int err; | 
|  |  | 
|  | /* | 
|  | * We have to be very careful here: changing a data block's | 
|  | * journaling status dynamically is dangerous.  If we write a | 
|  | * data block to the journal, change the status and then delete | 
|  | * that block, we risk forgetting to revoke the old log record | 
|  | * from the journal and so a subsequent replay can corrupt data. | 
|  | * So, first we make sure that the journal is empty and that | 
|  | * nobody is changing anything. | 
|  | */ | 
|  |  | 
|  | journal = EXT4_JOURNAL(inode); | 
|  | if (!journal) | 
|  | return 0; | 
|  | if (is_journal_aborted(journal)) | 
|  | return -EROFS; | 
|  |  | 
|  | jbd2_journal_lock_updates(journal); | 
|  | jbd2_journal_flush(journal); | 
|  |  | 
|  | /* | 
|  | * OK, there are no updates running now, and all cached data is | 
|  | * synced to disk.  We are now in a completely consistent state | 
|  | * which doesn't have anything in the journal, and we know that | 
|  | * no filesystem updates are running, so it is safe to modify | 
|  | * the inode's in-core data-journaling state flag now. | 
|  | */ | 
|  |  | 
|  | if (val) | 
|  | EXT4_I(inode)->i_flags |= EXT4_JOURNAL_DATA_FL; | 
|  | else | 
|  | EXT4_I(inode)->i_flags &= ~EXT4_JOURNAL_DATA_FL; | 
|  | ext4_set_aops(inode); | 
|  |  | 
|  | jbd2_journal_unlock_updates(journal); | 
|  |  | 
|  | /* Finally we can mark the inode as dirty. */ | 
|  |  | 
|  | handle = ext4_journal_start(inode, 1); | 
|  | if (IS_ERR(handle)) | 
|  | return PTR_ERR(handle); | 
|  |  | 
|  | err = ext4_mark_inode_dirty(handle, inode); | 
|  | ext4_handle_sync(handle); | 
|  | ext4_journal_stop(handle); | 
|  | ext4_std_error(inode->i_sb, err); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int ext4_bh_unmapped(handle_t *handle, struct buffer_head *bh) | 
|  | { | 
|  | return !buffer_mapped(bh); | 
|  | } | 
|  |  | 
|  | int ext4_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf) | 
|  | { | 
|  | struct page *page = vmf->page; | 
|  | loff_t size; | 
|  | unsigned long len; | 
|  | int ret = -EINVAL; | 
|  | void *fsdata; | 
|  | struct file *file = vma->vm_file; | 
|  | struct inode *inode = file->f_path.dentry->d_inode; | 
|  | struct address_space *mapping = inode->i_mapping; | 
|  |  | 
|  | /* | 
|  | * Get i_alloc_sem to stop truncates messing with the inode. We cannot | 
|  | * get i_mutex because we are already holding mmap_sem. | 
|  | */ | 
|  | down_read(&inode->i_alloc_sem); | 
|  | size = i_size_read(inode); | 
|  | if (page->mapping != mapping || size <= page_offset(page) | 
|  | || !PageUptodate(page)) { | 
|  | /* page got truncated from under us? */ | 
|  | goto out_unlock; | 
|  | } | 
|  | ret = 0; | 
|  | if (PageMappedToDisk(page)) | 
|  | goto out_unlock; | 
|  |  | 
|  | if (page->index == size >> PAGE_CACHE_SHIFT) | 
|  | len = size & ~PAGE_CACHE_MASK; | 
|  | else | 
|  | len = PAGE_CACHE_SIZE; | 
|  |  | 
|  | lock_page(page); | 
|  | /* | 
|  | * return if we have all the buffers mapped. This avoid | 
|  | * the need to call write_begin/write_end which does a | 
|  | * journal_start/journal_stop which can block and take | 
|  | * long time | 
|  | */ | 
|  | if (page_has_buffers(page)) { | 
|  | if (!walk_page_buffers(NULL, page_buffers(page), 0, len, NULL, | 
|  | ext4_bh_unmapped)) { | 
|  | unlock_page(page); | 
|  | goto out_unlock; | 
|  | } | 
|  | } | 
|  | unlock_page(page); | 
|  | /* | 
|  | * OK, we need to fill the hole... Do write_begin write_end | 
|  | * to do block allocation/reservation.We are not holding | 
|  | * inode.i__mutex here. That allow * parallel write_begin, | 
|  | * write_end call. lock_page prevent this from happening | 
|  | * on the same page though | 
|  | */ | 
|  | ret = mapping->a_ops->write_begin(file, mapping, page_offset(page), | 
|  | len, AOP_FLAG_UNINTERRUPTIBLE, &page, &fsdata); | 
|  | if (ret < 0) | 
|  | goto out_unlock; | 
|  | ret = mapping->a_ops->write_end(file, mapping, page_offset(page), | 
|  | len, len, page, fsdata); | 
|  | if (ret < 0) | 
|  | goto out_unlock; | 
|  | ret = 0; | 
|  | out_unlock: | 
|  | if (ret) | 
|  | ret = VM_FAULT_SIGBUS; | 
|  | up_read(&inode->i_alloc_sem); | 
|  | return ret; | 
|  | } |