|  | /* | 
|  | * OMAP2 McSPI controller driver | 
|  | * | 
|  | * Copyright (C) 2005, 2006 Nokia Corporation | 
|  | * Author:	Samuel Ortiz <samuel.ortiz@nokia.com> and | 
|  | *		Juha Yrj�l� <juha.yrjola@nokia.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/pm_runtime.h> | 
|  |  | 
|  | #include <linux/spi/spi.h> | 
|  |  | 
|  | #include <plat/dma.h> | 
|  | #include <plat/clock.h> | 
|  | #include <plat/mcspi.h> | 
|  |  | 
|  | #define OMAP2_MCSPI_MAX_FREQ		48000000 | 
|  |  | 
|  | /* OMAP2 has 3 SPI controllers, while OMAP3 has 4 */ | 
|  | #define OMAP2_MCSPI_MAX_CTRL 		4 | 
|  |  | 
|  | #define OMAP2_MCSPI_REVISION		0x00 | 
|  | #define OMAP2_MCSPI_SYSSTATUS		0x14 | 
|  | #define OMAP2_MCSPI_IRQSTATUS		0x18 | 
|  | #define OMAP2_MCSPI_IRQENABLE		0x1c | 
|  | #define OMAP2_MCSPI_WAKEUPENABLE	0x20 | 
|  | #define OMAP2_MCSPI_SYST		0x24 | 
|  | #define OMAP2_MCSPI_MODULCTRL		0x28 | 
|  |  | 
|  | /* per-channel banks, 0x14 bytes each, first is: */ | 
|  | #define OMAP2_MCSPI_CHCONF0		0x2c | 
|  | #define OMAP2_MCSPI_CHSTAT0		0x30 | 
|  | #define OMAP2_MCSPI_CHCTRL0		0x34 | 
|  | #define OMAP2_MCSPI_TX0			0x38 | 
|  | #define OMAP2_MCSPI_RX0			0x3c | 
|  |  | 
|  | /* per-register bitmasks: */ | 
|  |  | 
|  | #define OMAP2_MCSPI_MODULCTRL_SINGLE	BIT(0) | 
|  | #define OMAP2_MCSPI_MODULCTRL_MS	BIT(2) | 
|  | #define OMAP2_MCSPI_MODULCTRL_STEST	BIT(3) | 
|  |  | 
|  | #define OMAP2_MCSPI_CHCONF_PHA		BIT(0) | 
|  | #define OMAP2_MCSPI_CHCONF_POL		BIT(1) | 
|  | #define OMAP2_MCSPI_CHCONF_CLKD_MASK	(0x0f << 2) | 
|  | #define OMAP2_MCSPI_CHCONF_EPOL		BIT(6) | 
|  | #define OMAP2_MCSPI_CHCONF_WL_MASK	(0x1f << 7) | 
|  | #define OMAP2_MCSPI_CHCONF_TRM_RX_ONLY	BIT(12) | 
|  | #define OMAP2_MCSPI_CHCONF_TRM_TX_ONLY	BIT(13) | 
|  | #define OMAP2_MCSPI_CHCONF_TRM_MASK	(0x03 << 12) | 
|  | #define OMAP2_MCSPI_CHCONF_DMAW		BIT(14) | 
|  | #define OMAP2_MCSPI_CHCONF_DMAR		BIT(15) | 
|  | #define OMAP2_MCSPI_CHCONF_DPE0		BIT(16) | 
|  | #define OMAP2_MCSPI_CHCONF_DPE1		BIT(17) | 
|  | #define OMAP2_MCSPI_CHCONF_IS		BIT(18) | 
|  | #define OMAP2_MCSPI_CHCONF_TURBO	BIT(19) | 
|  | #define OMAP2_MCSPI_CHCONF_FORCE	BIT(20) | 
|  |  | 
|  | #define OMAP2_MCSPI_CHSTAT_RXS		BIT(0) | 
|  | #define OMAP2_MCSPI_CHSTAT_TXS		BIT(1) | 
|  | #define OMAP2_MCSPI_CHSTAT_EOT		BIT(2) | 
|  |  | 
|  | #define OMAP2_MCSPI_CHCTRL_EN		BIT(0) | 
|  |  | 
|  | #define OMAP2_MCSPI_WAKEUPENABLE_WKEN	BIT(0) | 
|  |  | 
|  | /* We have 2 DMA channels per CS, one for RX and one for TX */ | 
|  | struct omap2_mcspi_dma { | 
|  | int dma_tx_channel; | 
|  | int dma_rx_channel; | 
|  |  | 
|  | int dma_tx_sync_dev; | 
|  | int dma_rx_sync_dev; | 
|  |  | 
|  | struct completion dma_tx_completion; | 
|  | struct completion dma_rx_completion; | 
|  | }; | 
|  |  | 
|  | /* use PIO for small transfers, avoiding DMA setup/teardown overhead and | 
|  | * cache operations; better heuristics consider wordsize and bitrate. | 
|  | */ | 
|  | #define DMA_MIN_BYTES			160 | 
|  |  | 
|  |  | 
|  | struct omap2_mcspi { | 
|  | struct work_struct	work; | 
|  | /* lock protects queue and registers */ | 
|  | spinlock_t		lock; | 
|  | struct list_head	msg_queue; | 
|  | struct spi_master	*master; | 
|  | /* Virtual base address of the controller */ | 
|  | void __iomem		*base; | 
|  | unsigned long		phys; | 
|  | /* SPI1 has 4 channels, while SPI2 has 2 */ | 
|  | struct omap2_mcspi_dma	*dma_channels; | 
|  | struct  device		*dev; | 
|  | }; | 
|  |  | 
|  | struct omap2_mcspi_cs { | 
|  | void __iomem		*base; | 
|  | unsigned long		phys; | 
|  | int			word_len; | 
|  | struct list_head	node; | 
|  | /* Context save and restore shadow register */ | 
|  | u32			chconf0; | 
|  | }; | 
|  |  | 
|  | /* used for context save and restore, structure members to be updated whenever | 
|  | * corresponding registers are modified. | 
|  | */ | 
|  | struct omap2_mcspi_regs { | 
|  | u32 modulctrl; | 
|  | u32 wakeupenable; | 
|  | struct list_head cs; | 
|  | }; | 
|  |  | 
|  | static struct omap2_mcspi_regs omap2_mcspi_ctx[OMAP2_MCSPI_MAX_CTRL]; | 
|  |  | 
|  | static struct workqueue_struct *omap2_mcspi_wq; | 
|  |  | 
|  | #define MOD_REG_BIT(val, mask, set) do { \ | 
|  | if (set) \ | 
|  | val |= mask; \ | 
|  | else \ | 
|  | val &= ~mask; \ | 
|  | } while (0) | 
|  |  | 
|  | static inline void mcspi_write_reg(struct spi_master *master, | 
|  | int idx, u32 val) | 
|  | { | 
|  | struct omap2_mcspi *mcspi = spi_master_get_devdata(master); | 
|  |  | 
|  | __raw_writel(val, mcspi->base + idx); | 
|  | } | 
|  |  | 
|  | static inline u32 mcspi_read_reg(struct spi_master *master, int idx) | 
|  | { | 
|  | struct omap2_mcspi *mcspi = spi_master_get_devdata(master); | 
|  |  | 
|  | return __raw_readl(mcspi->base + idx); | 
|  | } | 
|  |  | 
|  | static inline void mcspi_write_cs_reg(const struct spi_device *spi, | 
|  | int idx, u32 val) | 
|  | { | 
|  | struct omap2_mcspi_cs	*cs = spi->controller_state; | 
|  |  | 
|  | __raw_writel(val, cs->base +  idx); | 
|  | } | 
|  |  | 
|  | static inline u32 mcspi_read_cs_reg(const struct spi_device *spi, int idx) | 
|  | { | 
|  | struct omap2_mcspi_cs	*cs = spi->controller_state; | 
|  |  | 
|  | return __raw_readl(cs->base + idx); | 
|  | } | 
|  |  | 
|  | static inline u32 mcspi_cached_chconf0(const struct spi_device *spi) | 
|  | { | 
|  | struct omap2_mcspi_cs *cs = spi->controller_state; | 
|  |  | 
|  | return cs->chconf0; | 
|  | } | 
|  |  | 
|  | static inline void mcspi_write_chconf0(const struct spi_device *spi, u32 val) | 
|  | { | 
|  | struct omap2_mcspi_cs *cs = spi->controller_state; | 
|  |  | 
|  | cs->chconf0 = val; | 
|  | mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, val); | 
|  | mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0); | 
|  | } | 
|  |  | 
|  | static void omap2_mcspi_set_dma_req(const struct spi_device *spi, | 
|  | int is_read, int enable) | 
|  | { | 
|  | u32 l, rw; | 
|  |  | 
|  | l = mcspi_cached_chconf0(spi); | 
|  |  | 
|  | if (is_read) /* 1 is read, 0 write */ | 
|  | rw = OMAP2_MCSPI_CHCONF_DMAR; | 
|  | else | 
|  | rw = OMAP2_MCSPI_CHCONF_DMAW; | 
|  |  | 
|  | MOD_REG_BIT(l, rw, enable); | 
|  | mcspi_write_chconf0(spi, l); | 
|  | } | 
|  |  | 
|  | static void omap2_mcspi_set_enable(const struct spi_device *spi, int enable) | 
|  | { | 
|  | u32 l; | 
|  |  | 
|  | l = enable ? OMAP2_MCSPI_CHCTRL_EN : 0; | 
|  | mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCTRL0, l); | 
|  | /* Flash post-writes */ | 
|  | mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCTRL0); | 
|  | } | 
|  |  | 
|  | static void omap2_mcspi_force_cs(struct spi_device *spi, int cs_active) | 
|  | { | 
|  | u32 l; | 
|  |  | 
|  | l = mcspi_cached_chconf0(spi); | 
|  | MOD_REG_BIT(l, OMAP2_MCSPI_CHCONF_FORCE, cs_active); | 
|  | mcspi_write_chconf0(spi, l); | 
|  | } | 
|  |  | 
|  | static void omap2_mcspi_set_master_mode(struct spi_master *master) | 
|  | { | 
|  | u32 l; | 
|  |  | 
|  | /* setup when switching from (reset default) slave mode | 
|  | * to single-channel master mode | 
|  | */ | 
|  | l = mcspi_read_reg(master, OMAP2_MCSPI_MODULCTRL); | 
|  | MOD_REG_BIT(l, OMAP2_MCSPI_MODULCTRL_STEST, 0); | 
|  | MOD_REG_BIT(l, OMAP2_MCSPI_MODULCTRL_MS, 0); | 
|  | MOD_REG_BIT(l, OMAP2_MCSPI_MODULCTRL_SINGLE, 1); | 
|  | mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, l); | 
|  |  | 
|  | omap2_mcspi_ctx[master->bus_num - 1].modulctrl = l; | 
|  | } | 
|  |  | 
|  | static void omap2_mcspi_restore_ctx(struct omap2_mcspi *mcspi) | 
|  | { | 
|  | struct spi_master *spi_cntrl; | 
|  | struct omap2_mcspi_cs *cs; | 
|  | spi_cntrl = mcspi->master; | 
|  |  | 
|  | /* McSPI: context restore */ | 
|  | mcspi_write_reg(spi_cntrl, OMAP2_MCSPI_MODULCTRL, | 
|  | omap2_mcspi_ctx[spi_cntrl->bus_num - 1].modulctrl); | 
|  |  | 
|  | mcspi_write_reg(spi_cntrl, OMAP2_MCSPI_WAKEUPENABLE, | 
|  | omap2_mcspi_ctx[spi_cntrl->bus_num - 1].wakeupenable); | 
|  |  | 
|  | list_for_each_entry(cs, &omap2_mcspi_ctx[spi_cntrl->bus_num - 1].cs, | 
|  | node) | 
|  | __raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0); | 
|  | } | 
|  | static void omap2_mcspi_disable_clocks(struct omap2_mcspi *mcspi) | 
|  | { | 
|  | pm_runtime_put_sync(mcspi->dev); | 
|  | } | 
|  |  | 
|  | static int omap2_mcspi_enable_clocks(struct omap2_mcspi *mcspi) | 
|  | { | 
|  | return pm_runtime_get_sync(mcspi->dev); | 
|  | } | 
|  |  | 
|  | static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit) | 
|  | { | 
|  | unsigned long timeout; | 
|  |  | 
|  | timeout = jiffies + msecs_to_jiffies(1000); | 
|  | while (!(__raw_readl(reg) & bit)) { | 
|  | if (time_after(jiffies, timeout)) | 
|  | return -1; | 
|  | cpu_relax(); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static unsigned | 
|  | omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) | 
|  | { | 
|  | struct omap2_mcspi	*mcspi; | 
|  | struct omap2_mcspi_cs	*cs = spi->controller_state; | 
|  | struct omap2_mcspi_dma  *mcspi_dma; | 
|  | unsigned int		count, c; | 
|  | unsigned long		base, tx_reg, rx_reg; | 
|  | int			word_len, data_type, element_count; | 
|  | int			elements = 0; | 
|  | u32			l; | 
|  | u8			* rx; | 
|  | const u8		* tx; | 
|  | void __iomem		*chstat_reg; | 
|  |  | 
|  | mcspi = spi_master_get_devdata(spi->master); | 
|  | mcspi_dma = &mcspi->dma_channels[spi->chip_select]; | 
|  | l = mcspi_cached_chconf0(spi); | 
|  |  | 
|  | chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0; | 
|  |  | 
|  | count = xfer->len; | 
|  | c = count; | 
|  | word_len = cs->word_len; | 
|  |  | 
|  | base = cs->phys; | 
|  | tx_reg = base + OMAP2_MCSPI_TX0; | 
|  | rx_reg = base + OMAP2_MCSPI_RX0; | 
|  | rx = xfer->rx_buf; | 
|  | tx = xfer->tx_buf; | 
|  |  | 
|  | if (word_len <= 8) { | 
|  | data_type = OMAP_DMA_DATA_TYPE_S8; | 
|  | element_count = count; | 
|  | } else if (word_len <= 16) { | 
|  | data_type = OMAP_DMA_DATA_TYPE_S16; | 
|  | element_count = count >> 1; | 
|  | } else /* word_len <= 32 */ { | 
|  | data_type = OMAP_DMA_DATA_TYPE_S32; | 
|  | element_count = count >> 2; | 
|  | } | 
|  |  | 
|  | if (tx != NULL) { | 
|  | omap_set_dma_transfer_params(mcspi_dma->dma_tx_channel, | 
|  | data_type, element_count, 1, | 
|  | OMAP_DMA_SYNC_ELEMENT, | 
|  | mcspi_dma->dma_tx_sync_dev, 0); | 
|  |  | 
|  | omap_set_dma_dest_params(mcspi_dma->dma_tx_channel, 0, | 
|  | OMAP_DMA_AMODE_CONSTANT, | 
|  | tx_reg, 0, 0); | 
|  |  | 
|  | omap_set_dma_src_params(mcspi_dma->dma_tx_channel, 0, | 
|  | OMAP_DMA_AMODE_POST_INC, | 
|  | xfer->tx_dma, 0, 0); | 
|  | } | 
|  |  | 
|  | if (rx != NULL) { | 
|  | elements = element_count - 1; | 
|  | if (l & OMAP2_MCSPI_CHCONF_TURBO) | 
|  | elements--; | 
|  |  | 
|  | omap_set_dma_transfer_params(mcspi_dma->dma_rx_channel, | 
|  | data_type, elements, 1, | 
|  | OMAP_DMA_SYNC_ELEMENT, | 
|  | mcspi_dma->dma_rx_sync_dev, 1); | 
|  |  | 
|  | omap_set_dma_src_params(mcspi_dma->dma_rx_channel, 0, | 
|  | OMAP_DMA_AMODE_CONSTANT, | 
|  | rx_reg, 0, 0); | 
|  |  | 
|  | omap_set_dma_dest_params(mcspi_dma->dma_rx_channel, 0, | 
|  | OMAP_DMA_AMODE_POST_INC, | 
|  | xfer->rx_dma, 0, 0); | 
|  | } | 
|  |  | 
|  | if (tx != NULL) { | 
|  | omap_start_dma(mcspi_dma->dma_tx_channel); | 
|  | omap2_mcspi_set_dma_req(spi, 0, 1); | 
|  | } | 
|  |  | 
|  | if (rx != NULL) { | 
|  | omap_start_dma(mcspi_dma->dma_rx_channel); | 
|  | omap2_mcspi_set_dma_req(spi, 1, 1); | 
|  | } | 
|  |  | 
|  | if (tx != NULL) { | 
|  | wait_for_completion(&mcspi_dma->dma_tx_completion); | 
|  | dma_unmap_single(&spi->dev, xfer->tx_dma, count, DMA_TO_DEVICE); | 
|  |  | 
|  | /* for TX_ONLY mode, be sure all words have shifted out */ | 
|  | if (rx == NULL) { | 
|  | if (mcspi_wait_for_reg_bit(chstat_reg, | 
|  | OMAP2_MCSPI_CHSTAT_TXS) < 0) | 
|  | dev_err(&spi->dev, "TXS timed out\n"); | 
|  | else if (mcspi_wait_for_reg_bit(chstat_reg, | 
|  | OMAP2_MCSPI_CHSTAT_EOT) < 0) | 
|  | dev_err(&spi->dev, "EOT timed out\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (rx != NULL) { | 
|  | wait_for_completion(&mcspi_dma->dma_rx_completion); | 
|  | dma_unmap_single(&spi->dev, xfer->rx_dma, count, DMA_FROM_DEVICE); | 
|  | omap2_mcspi_set_enable(spi, 0); | 
|  |  | 
|  | if (l & OMAP2_MCSPI_CHCONF_TURBO) { | 
|  |  | 
|  | if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0) | 
|  | & OMAP2_MCSPI_CHSTAT_RXS)) { | 
|  | u32 w; | 
|  |  | 
|  | w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0); | 
|  | if (word_len <= 8) | 
|  | ((u8 *)xfer->rx_buf)[elements++] = w; | 
|  | else if (word_len <= 16) | 
|  | ((u16 *)xfer->rx_buf)[elements++] = w; | 
|  | else /* word_len <= 32 */ | 
|  | ((u32 *)xfer->rx_buf)[elements++] = w; | 
|  | } else { | 
|  | dev_err(&spi->dev, | 
|  | "DMA RX penultimate word empty"); | 
|  | count -= (word_len <= 8)  ? 2 : | 
|  | (word_len <= 16) ? 4 : | 
|  | /* word_len <= 32 */ 8; | 
|  | omap2_mcspi_set_enable(spi, 1); | 
|  | return count; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0) | 
|  | & OMAP2_MCSPI_CHSTAT_RXS)) { | 
|  | u32 w; | 
|  |  | 
|  | w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0); | 
|  | if (word_len <= 8) | 
|  | ((u8 *)xfer->rx_buf)[elements] = w; | 
|  | else if (word_len <= 16) | 
|  | ((u16 *)xfer->rx_buf)[elements] = w; | 
|  | else /* word_len <= 32 */ | 
|  | ((u32 *)xfer->rx_buf)[elements] = w; | 
|  | } else { | 
|  | dev_err(&spi->dev, "DMA RX last word empty"); | 
|  | count -= (word_len <= 8)  ? 1 : | 
|  | (word_len <= 16) ? 2 : | 
|  | /* word_len <= 32 */ 4; | 
|  | } | 
|  | omap2_mcspi_set_enable(spi, 1); | 
|  | } | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static unsigned | 
|  | omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) | 
|  | { | 
|  | struct omap2_mcspi	*mcspi; | 
|  | struct omap2_mcspi_cs	*cs = spi->controller_state; | 
|  | unsigned int		count, c; | 
|  | u32			l; | 
|  | void __iomem		*base = cs->base; | 
|  | void __iomem		*tx_reg; | 
|  | void __iomem		*rx_reg; | 
|  | void __iomem		*chstat_reg; | 
|  | int			word_len; | 
|  |  | 
|  | mcspi = spi_master_get_devdata(spi->master); | 
|  | count = xfer->len; | 
|  | c = count; | 
|  | word_len = cs->word_len; | 
|  |  | 
|  | l = mcspi_cached_chconf0(spi); | 
|  |  | 
|  | /* We store the pre-calculated register addresses on stack to speed | 
|  | * up the transfer loop. */ | 
|  | tx_reg		= base + OMAP2_MCSPI_TX0; | 
|  | rx_reg		= base + OMAP2_MCSPI_RX0; | 
|  | chstat_reg	= base + OMAP2_MCSPI_CHSTAT0; | 
|  |  | 
|  | if (c < (word_len>>3)) | 
|  | return 0; | 
|  |  | 
|  | if (word_len <= 8) { | 
|  | u8		*rx; | 
|  | const u8	*tx; | 
|  |  | 
|  | rx = xfer->rx_buf; | 
|  | tx = xfer->tx_buf; | 
|  |  | 
|  | do { | 
|  | c -= 1; | 
|  | if (tx != NULL) { | 
|  | if (mcspi_wait_for_reg_bit(chstat_reg, | 
|  | OMAP2_MCSPI_CHSTAT_TXS) < 0) { | 
|  | dev_err(&spi->dev, "TXS timed out\n"); | 
|  | goto out; | 
|  | } | 
|  | dev_vdbg(&spi->dev, "write-%d %02x\n", | 
|  | word_len, *tx); | 
|  | __raw_writel(*tx++, tx_reg); | 
|  | } | 
|  | if (rx != NULL) { | 
|  | if (mcspi_wait_for_reg_bit(chstat_reg, | 
|  | OMAP2_MCSPI_CHSTAT_RXS) < 0) { | 
|  | dev_err(&spi->dev, "RXS timed out\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (c == 1 && tx == NULL && | 
|  | (l & OMAP2_MCSPI_CHCONF_TURBO)) { | 
|  | omap2_mcspi_set_enable(spi, 0); | 
|  | *rx++ = __raw_readl(rx_reg); | 
|  | dev_vdbg(&spi->dev, "read-%d %02x\n", | 
|  | word_len, *(rx - 1)); | 
|  | if (mcspi_wait_for_reg_bit(chstat_reg, | 
|  | OMAP2_MCSPI_CHSTAT_RXS) < 0) { | 
|  | dev_err(&spi->dev, | 
|  | "RXS timed out\n"); | 
|  | goto out; | 
|  | } | 
|  | c = 0; | 
|  | } else if (c == 0 && tx == NULL) { | 
|  | omap2_mcspi_set_enable(spi, 0); | 
|  | } | 
|  |  | 
|  | *rx++ = __raw_readl(rx_reg); | 
|  | dev_vdbg(&spi->dev, "read-%d %02x\n", | 
|  | word_len, *(rx - 1)); | 
|  | } | 
|  | } while (c); | 
|  | } else if (word_len <= 16) { | 
|  | u16		*rx; | 
|  | const u16	*tx; | 
|  |  | 
|  | rx = xfer->rx_buf; | 
|  | tx = xfer->tx_buf; | 
|  | do { | 
|  | c -= 2; | 
|  | if (tx != NULL) { | 
|  | if (mcspi_wait_for_reg_bit(chstat_reg, | 
|  | OMAP2_MCSPI_CHSTAT_TXS) < 0) { | 
|  | dev_err(&spi->dev, "TXS timed out\n"); | 
|  | goto out; | 
|  | } | 
|  | dev_vdbg(&spi->dev, "write-%d %04x\n", | 
|  | word_len, *tx); | 
|  | __raw_writel(*tx++, tx_reg); | 
|  | } | 
|  | if (rx != NULL) { | 
|  | if (mcspi_wait_for_reg_bit(chstat_reg, | 
|  | OMAP2_MCSPI_CHSTAT_RXS) < 0) { | 
|  | dev_err(&spi->dev, "RXS timed out\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (c == 2 && tx == NULL && | 
|  | (l & OMAP2_MCSPI_CHCONF_TURBO)) { | 
|  | omap2_mcspi_set_enable(spi, 0); | 
|  | *rx++ = __raw_readl(rx_reg); | 
|  | dev_vdbg(&spi->dev, "read-%d %04x\n", | 
|  | word_len, *(rx - 1)); | 
|  | if (mcspi_wait_for_reg_bit(chstat_reg, | 
|  | OMAP2_MCSPI_CHSTAT_RXS) < 0) { | 
|  | dev_err(&spi->dev, | 
|  | "RXS timed out\n"); | 
|  | goto out; | 
|  | } | 
|  | c = 0; | 
|  | } else if (c == 0 && tx == NULL) { | 
|  | omap2_mcspi_set_enable(spi, 0); | 
|  | } | 
|  |  | 
|  | *rx++ = __raw_readl(rx_reg); | 
|  | dev_vdbg(&spi->dev, "read-%d %04x\n", | 
|  | word_len, *(rx - 1)); | 
|  | } | 
|  | } while (c >= 2); | 
|  | } else if (word_len <= 32) { | 
|  | u32		*rx; | 
|  | const u32	*tx; | 
|  |  | 
|  | rx = xfer->rx_buf; | 
|  | tx = xfer->tx_buf; | 
|  | do { | 
|  | c -= 4; | 
|  | if (tx != NULL) { | 
|  | if (mcspi_wait_for_reg_bit(chstat_reg, | 
|  | OMAP2_MCSPI_CHSTAT_TXS) < 0) { | 
|  | dev_err(&spi->dev, "TXS timed out\n"); | 
|  | goto out; | 
|  | } | 
|  | dev_vdbg(&spi->dev, "write-%d %08x\n", | 
|  | word_len, *tx); | 
|  | __raw_writel(*tx++, tx_reg); | 
|  | } | 
|  | if (rx != NULL) { | 
|  | if (mcspi_wait_for_reg_bit(chstat_reg, | 
|  | OMAP2_MCSPI_CHSTAT_RXS) < 0) { | 
|  | dev_err(&spi->dev, "RXS timed out\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (c == 4 && tx == NULL && | 
|  | (l & OMAP2_MCSPI_CHCONF_TURBO)) { | 
|  | omap2_mcspi_set_enable(spi, 0); | 
|  | *rx++ = __raw_readl(rx_reg); | 
|  | dev_vdbg(&spi->dev, "read-%d %08x\n", | 
|  | word_len, *(rx - 1)); | 
|  | if (mcspi_wait_for_reg_bit(chstat_reg, | 
|  | OMAP2_MCSPI_CHSTAT_RXS) < 0) { | 
|  | dev_err(&spi->dev, | 
|  | "RXS timed out\n"); | 
|  | goto out; | 
|  | } | 
|  | c = 0; | 
|  | } else if (c == 0 && tx == NULL) { | 
|  | omap2_mcspi_set_enable(spi, 0); | 
|  | } | 
|  |  | 
|  | *rx++ = __raw_readl(rx_reg); | 
|  | dev_vdbg(&spi->dev, "read-%d %08x\n", | 
|  | word_len, *(rx - 1)); | 
|  | } | 
|  | } while (c >= 4); | 
|  | } | 
|  |  | 
|  | /* for TX_ONLY mode, be sure all words have shifted out */ | 
|  | if (xfer->rx_buf == NULL) { | 
|  | if (mcspi_wait_for_reg_bit(chstat_reg, | 
|  | OMAP2_MCSPI_CHSTAT_TXS) < 0) { | 
|  | dev_err(&spi->dev, "TXS timed out\n"); | 
|  | } else if (mcspi_wait_for_reg_bit(chstat_reg, | 
|  | OMAP2_MCSPI_CHSTAT_EOT) < 0) | 
|  | dev_err(&spi->dev, "EOT timed out\n"); | 
|  |  | 
|  | /* disable chan to purge rx datas received in TX_ONLY transfer, | 
|  | * otherwise these rx datas will affect the direct following | 
|  | * RX_ONLY transfer. | 
|  | */ | 
|  | omap2_mcspi_set_enable(spi, 0); | 
|  | } | 
|  | out: | 
|  | omap2_mcspi_set_enable(spi, 1); | 
|  | return count - c; | 
|  | } | 
|  |  | 
|  | static u32 omap2_mcspi_calc_divisor(u32 speed_hz) | 
|  | { | 
|  | u32 div; | 
|  |  | 
|  | for (div = 0; div < 15; div++) | 
|  | if (speed_hz >= (OMAP2_MCSPI_MAX_FREQ >> div)) | 
|  | return div; | 
|  |  | 
|  | return 15; | 
|  | } | 
|  |  | 
|  | /* called only when no transfer is active to this device */ | 
|  | static int omap2_mcspi_setup_transfer(struct spi_device *spi, | 
|  | struct spi_transfer *t) | 
|  | { | 
|  | struct omap2_mcspi_cs *cs = spi->controller_state; | 
|  | struct omap2_mcspi *mcspi; | 
|  | struct spi_master *spi_cntrl; | 
|  | u32 l = 0, div = 0; | 
|  | u8 word_len = spi->bits_per_word; | 
|  | u32 speed_hz = spi->max_speed_hz; | 
|  |  | 
|  | mcspi = spi_master_get_devdata(spi->master); | 
|  | spi_cntrl = mcspi->master; | 
|  |  | 
|  | if (t != NULL && t->bits_per_word) | 
|  | word_len = t->bits_per_word; | 
|  |  | 
|  | cs->word_len = word_len; | 
|  |  | 
|  | if (t && t->speed_hz) | 
|  | speed_hz = t->speed_hz; | 
|  |  | 
|  | speed_hz = min_t(u32, speed_hz, OMAP2_MCSPI_MAX_FREQ); | 
|  | div = omap2_mcspi_calc_divisor(speed_hz); | 
|  |  | 
|  | l = mcspi_cached_chconf0(spi); | 
|  |  | 
|  | /* standard 4-wire master mode:  SCK, MOSI/out, MISO/in, nCS | 
|  | * REVISIT: this controller could support SPI_3WIRE mode. | 
|  | */ | 
|  | l &= ~(OMAP2_MCSPI_CHCONF_IS|OMAP2_MCSPI_CHCONF_DPE1); | 
|  | l |= OMAP2_MCSPI_CHCONF_DPE0; | 
|  |  | 
|  | /* wordlength */ | 
|  | l &= ~OMAP2_MCSPI_CHCONF_WL_MASK; | 
|  | l |= (word_len - 1) << 7; | 
|  |  | 
|  | /* set chipselect polarity; manage with FORCE */ | 
|  | if (!(spi->mode & SPI_CS_HIGH)) | 
|  | l |= OMAP2_MCSPI_CHCONF_EPOL;	/* active-low; normal */ | 
|  | else | 
|  | l &= ~OMAP2_MCSPI_CHCONF_EPOL; | 
|  |  | 
|  | /* set clock divisor */ | 
|  | l &= ~OMAP2_MCSPI_CHCONF_CLKD_MASK; | 
|  | l |= div << 2; | 
|  |  | 
|  | /* set SPI mode 0..3 */ | 
|  | if (spi->mode & SPI_CPOL) | 
|  | l |= OMAP2_MCSPI_CHCONF_POL; | 
|  | else | 
|  | l &= ~OMAP2_MCSPI_CHCONF_POL; | 
|  | if (spi->mode & SPI_CPHA) | 
|  | l |= OMAP2_MCSPI_CHCONF_PHA; | 
|  | else | 
|  | l &= ~OMAP2_MCSPI_CHCONF_PHA; | 
|  |  | 
|  | mcspi_write_chconf0(spi, l); | 
|  |  | 
|  | dev_dbg(&spi->dev, "setup: speed %d, sample %s edge, clk %s\n", | 
|  | OMAP2_MCSPI_MAX_FREQ >> div, | 
|  | (spi->mode & SPI_CPHA) ? "trailing" : "leading", | 
|  | (spi->mode & SPI_CPOL) ? "inverted" : "normal"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void omap2_mcspi_dma_rx_callback(int lch, u16 ch_status, void *data) | 
|  | { | 
|  | struct spi_device	*spi = data; | 
|  | struct omap2_mcspi	*mcspi; | 
|  | struct omap2_mcspi_dma	*mcspi_dma; | 
|  |  | 
|  | mcspi = spi_master_get_devdata(spi->master); | 
|  | mcspi_dma = &(mcspi->dma_channels[spi->chip_select]); | 
|  |  | 
|  | complete(&mcspi_dma->dma_rx_completion); | 
|  |  | 
|  | /* We must disable the DMA RX request */ | 
|  | omap2_mcspi_set_dma_req(spi, 1, 0); | 
|  | } | 
|  |  | 
|  | static void omap2_mcspi_dma_tx_callback(int lch, u16 ch_status, void *data) | 
|  | { | 
|  | struct spi_device	*spi = data; | 
|  | struct omap2_mcspi	*mcspi; | 
|  | struct omap2_mcspi_dma	*mcspi_dma; | 
|  |  | 
|  | mcspi = spi_master_get_devdata(spi->master); | 
|  | mcspi_dma = &(mcspi->dma_channels[spi->chip_select]); | 
|  |  | 
|  | complete(&mcspi_dma->dma_tx_completion); | 
|  |  | 
|  | /* We must disable the DMA TX request */ | 
|  | omap2_mcspi_set_dma_req(spi, 0, 0); | 
|  | } | 
|  |  | 
|  | static int omap2_mcspi_request_dma(struct spi_device *spi) | 
|  | { | 
|  | struct spi_master	*master = spi->master; | 
|  | struct omap2_mcspi	*mcspi; | 
|  | struct omap2_mcspi_dma	*mcspi_dma; | 
|  |  | 
|  | mcspi = spi_master_get_devdata(master); | 
|  | mcspi_dma = mcspi->dma_channels + spi->chip_select; | 
|  |  | 
|  | if (omap_request_dma(mcspi_dma->dma_rx_sync_dev, "McSPI RX", | 
|  | omap2_mcspi_dma_rx_callback, spi, | 
|  | &mcspi_dma->dma_rx_channel)) { | 
|  | dev_err(&spi->dev, "no RX DMA channel for McSPI\n"); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | if (omap_request_dma(mcspi_dma->dma_tx_sync_dev, "McSPI TX", | 
|  | omap2_mcspi_dma_tx_callback, spi, | 
|  | &mcspi_dma->dma_tx_channel)) { | 
|  | omap_free_dma(mcspi_dma->dma_rx_channel); | 
|  | mcspi_dma->dma_rx_channel = -1; | 
|  | dev_err(&spi->dev, "no TX DMA channel for McSPI\n"); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | init_completion(&mcspi_dma->dma_rx_completion); | 
|  | init_completion(&mcspi_dma->dma_tx_completion); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int omap2_mcspi_setup(struct spi_device *spi) | 
|  | { | 
|  | int			ret; | 
|  | struct omap2_mcspi	*mcspi; | 
|  | struct omap2_mcspi_dma	*mcspi_dma; | 
|  | struct omap2_mcspi_cs	*cs = spi->controller_state; | 
|  |  | 
|  | if (spi->bits_per_word < 4 || spi->bits_per_word > 32) { | 
|  | dev_dbg(&spi->dev, "setup: unsupported %d bit words\n", | 
|  | spi->bits_per_word); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | mcspi = spi_master_get_devdata(spi->master); | 
|  | mcspi_dma = &mcspi->dma_channels[spi->chip_select]; | 
|  |  | 
|  | if (!cs) { | 
|  | cs = kzalloc(sizeof *cs, GFP_KERNEL); | 
|  | if (!cs) | 
|  | return -ENOMEM; | 
|  | cs->base = mcspi->base + spi->chip_select * 0x14; | 
|  | cs->phys = mcspi->phys + spi->chip_select * 0x14; | 
|  | cs->chconf0 = 0; | 
|  | spi->controller_state = cs; | 
|  | /* Link this to context save list */ | 
|  | list_add_tail(&cs->node, | 
|  | &omap2_mcspi_ctx[mcspi->master->bus_num - 1].cs); | 
|  | } | 
|  |  | 
|  | if (mcspi_dma->dma_rx_channel == -1 | 
|  | || mcspi_dma->dma_tx_channel == -1) { | 
|  | ret = omap2_mcspi_request_dma(spi); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = omap2_mcspi_enable_clocks(mcspi); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = omap2_mcspi_setup_transfer(spi, NULL); | 
|  | omap2_mcspi_disable_clocks(mcspi); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void omap2_mcspi_cleanup(struct spi_device *spi) | 
|  | { | 
|  | struct omap2_mcspi	*mcspi; | 
|  | struct omap2_mcspi_dma	*mcspi_dma; | 
|  | struct omap2_mcspi_cs	*cs; | 
|  |  | 
|  | mcspi = spi_master_get_devdata(spi->master); | 
|  |  | 
|  | if (spi->controller_state) { | 
|  | /* Unlink controller state from context save list */ | 
|  | cs = spi->controller_state; | 
|  | list_del(&cs->node); | 
|  |  | 
|  | kfree(spi->controller_state); | 
|  | } | 
|  |  | 
|  | if (spi->chip_select < spi->master->num_chipselect) { | 
|  | mcspi_dma = &mcspi->dma_channels[spi->chip_select]; | 
|  |  | 
|  | if (mcspi_dma->dma_rx_channel != -1) { | 
|  | omap_free_dma(mcspi_dma->dma_rx_channel); | 
|  | mcspi_dma->dma_rx_channel = -1; | 
|  | } | 
|  | if (mcspi_dma->dma_tx_channel != -1) { | 
|  | omap_free_dma(mcspi_dma->dma_tx_channel); | 
|  | mcspi_dma->dma_tx_channel = -1; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void omap2_mcspi_work(struct work_struct *work) | 
|  | { | 
|  | struct omap2_mcspi	*mcspi; | 
|  |  | 
|  | mcspi = container_of(work, struct omap2_mcspi, work); | 
|  |  | 
|  | if (omap2_mcspi_enable_clocks(mcspi) < 0) | 
|  | return; | 
|  |  | 
|  | spin_lock_irq(&mcspi->lock); | 
|  |  | 
|  | /* We only enable one channel at a time -- the one whose message is | 
|  | * at the head of the queue -- although this controller would gladly | 
|  | * arbitrate among multiple channels.  This corresponds to "single | 
|  | * channel" master mode.  As a side effect, we need to manage the | 
|  | * chipselect with the FORCE bit ... CS != channel enable. | 
|  | */ | 
|  | while (!list_empty(&mcspi->msg_queue)) { | 
|  | struct spi_message		*m; | 
|  | struct spi_device		*spi; | 
|  | struct spi_transfer		*t = NULL; | 
|  | int				cs_active = 0; | 
|  | struct omap2_mcspi_cs		*cs; | 
|  | struct omap2_mcspi_device_config *cd; | 
|  | int				par_override = 0; | 
|  | int				status = 0; | 
|  | u32				chconf; | 
|  |  | 
|  | m = container_of(mcspi->msg_queue.next, struct spi_message, | 
|  | queue); | 
|  |  | 
|  | list_del_init(&m->queue); | 
|  | spin_unlock_irq(&mcspi->lock); | 
|  |  | 
|  | spi = m->spi; | 
|  | cs = spi->controller_state; | 
|  | cd = spi->controller_data; | 
|  |  | 
|  | omap2_mcspi_set_enable(spi, 1); | 
|  | list_for_each_entry(t, &m->transfers, transfer_list) { | 
|  | if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) { | 
|  | status = -EINVAL; | 
|  | break; | 
|  | } | 
|  | if (par_override || t->speed_hz || t->bits_per_word) { | 
|  | par_override = 1; | 
|  | status = omap2_mcspi_setup_transfer(spi, t); | 
|  | if (status < 0) | 
|  | break; | 
|  | if (!t->speed_hz && !t->bits_per_word) | 
|  | par_override = 0; | 
|  | } | 
|  |  | 
|  | if (!cs_active) { | 
|  | omap2_mcspi_force_cs(spi, 1); | 
|  | cs_active = 1; | 
|  | } | 
|  |  | 
|  | chconf = mcspi_cached_chconf0(spi); | 
|  | chconf &= ~OMAP2_MCSPI_CHCONF_TRM_MASK; | 
|  | chconf &= ~OMAP2_MCSPI_CHCONF_TURBO; | 
|  |  | 
|  | if (t->tx_buf == NULL) | 
|  | chconf |= OMAP2_MCSPI_CHCONF_TRM_RX_ONLY; | 
|  | else if (t->rx_buf == NULL) | 
|  | chconf |= OMAP2_MCSPI_CHCONF_TRM_TX_ONLY; | 
|  |  | 
|  | if (cd && cd->turbo_mode && t->tx_buf == NULL) { | 
|  | /* Turbo mode is for more than one word */ | 
|  | if (t->len > ((cs->word_len + 7) >> 3)) | 
|  | chconf |= OMAP2_MCSPI_CHCONF_TURBO; | 
|  | } | 
|  |  | 
|  | mcspi_write_chconf0(spi, chconf); | 
|  |  | 
|  | if (t->len) { | 
|  | unsigned	count; | 
|  |  | 
|  | /* RX_ONLY mode needs dummy data in TX reg */ | 
|  | if (t->tx_buf == NULL) | 
|  | __raw_writel(0, cs->base | 
|  | + OMAP2_MCSPI_TX0); | 
|  |  | 
|  | if (m->is_dma_mapped || t->len >= DMA_MIN_BYTES) | 
|  | count = omap2_mcspi_txrx_dma(spi, t); | 
|  | else | 
|  | count = omap2_mcspi_txrx_pio(spi, t); | 
|  | m->actual_length += count; | 
|  |  | 
|  | if (count != t->len) { | 
|  | status = -EIO; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (t->delay_usecs) | 
|  | udelay(t->delay_usecs); | 
|  |  | 
|  | /* ignore the "leave it on after last xfer" hint */ | 
|  | if (t->cs_change) { | 
|  | omap2_mcspi_force_cs(spi, 0); | 
|  | cs_active = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Restore defaults if they were overriden */ | 
|  | if (par_override) { | 
|  | par_override = 0; | 
|  | status = omap2_mcspi_setup_transfer(spi, NULL); | 
|  | } | 
|  |  | 
|  | if (cs_active) | 
|  | omap2_mcspi_force_cs(spi, 0); | 
|  |  | 
|  | omap2_mcspi_set_enable(spi, 0); | 
|  |  | 
|  | m->status = status; | 
|  | m->complete(m->context); | 
|  |  | 
|  | spin_lock_irq(&mcspi->lock); | 
|  | } | 
|  |  | 
|  | spin_unlock_irq(&mcspi->lock); | 
|  |  | 
|  | omap2_mcspi_disable_clocks(mcspi); | 
|  | } | 
|  |  | 
|  | static int omap2_mcspi_transfer(struct spi_device *spi, struct spi_message *m) | 
|  | { | 
|  | struct omap2_mcspi	*mcspi; | 
|  | unsigned long		flags; | 
|  | struct spi_transfer	*t; | 
|  |  | 
|  | m->actual_length = 0; | 
|  | m->status = 0; | 
|  |  | 
|  | /* reject invalid messages and transfers */ | 
|  | if (list_empty(&m->transfers) || !m->complete) | 
|  | return -EINVAL; | 
|  | list_for_each_entry(t, &m->transfers, transfer_list) { | 
|  | const void	*tx_buf = t->tx_buf; | 
|  | void		*rx_buf = t->rx_buf; | 
|  | unsigned	len = t->len; | 
|  |  | 
|  | if (t->speed_hz > OMAP2_MCSPI_MAX_FREQ | 
|  | || (len && !(rx_buf || tx_buf)) | 
|  | || (t->bits_per_word && | 
|  | (  t->bits_per_word < 4 | 
|  | || t->bits_per_word > 32))) { | 
|  | dev_dbg(&spi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n", | 
|  | t->speed_hz, | 
|  | len, | 
|  | tx_buf ? "tx" : "", | 
|  | rx_buf ? "rx" : "", | 
|  | t->bits_per_word); | 
|  | return -EINVAL; | 
|  | } | 
|  | if (t->speed_hz && t->speed_hz < (OMAP2_MCSPI_MAX_FREQ >> 15)) { | 
|  | dev_dbg(&spi->dev, "speed_hz %d below minimum %d Hz\n", | 
|  | t->speed_hz, | 
|  | OMAP2_MCSPI_MAX_FREQ >> 15); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (m->is_dma_mapped || len < DMA_MIN_BYTES) | 
|  | continue; | 
|  |  | 
|  | if (tx_buf != NULL) { | 
|  | t->tx_dma = dma_map_single(&spi->dev, (void *) tx_buf, | 
|  | len, DMA_TO_DEVICE); | 
|  | if (dma_mapping_error(&spi->dev, t->tx_dma)) { | 
|  | dev_dbg(&spi->dev, "dma %cX %d bytes error\n", | 
|  | 'T', len); | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  | if (rx_buf != NULL) { | 
|  | t->rx_dma = dma_map_single(&spi->dev, rx_buf, t->len, | 
|  | DMA_FROM_DEVICE); | 
|  | if (dma_mapping_error(&spi->dev, t->rx_dma)) { | 
|  | dev_dbg(&spi->dev, "dma %cX %d bytes error\n", | 
|  | 'R', len); | 
|  | if (tx_buf != NULL) | 
|  | dma_unmap_single(&spi->dev, t->tx_dma, | 
|  | len, DMA_TO_DEVICE); | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | mcspi = spi_master_get_devdata(spi->master); | 
|  |  | 
|  | spin_lock_irqsave(&mcspi->lock, flags); | 
|  | list_add_tail(&m->queue, &mcspi->msg_queue); | 
|  | queue_work(omap2_mcspi_wq, &mcspi->work); | 
|  | spin_unlock_irqrestore(&mcspi->lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __init omap2_mcspi_master_setup(struct omap2_mcspi *mcspi) | 
|  | { | 
|  | struct spi_master	*master = mcspi->master; | 
|  | u32			tmp; | 
|  | int ret = 0; | 
|  |  | 
|  | ret = omap2_mcspi_enable_clocks(mcspi); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | tmp = OMAP2_MCSPI_WAKEUPENABLE_WKEN; | 
|  | mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE, tmp); | 
|  | omap2_mcspi_ctx[master->bus_num - 1].wakeupenable = tmp; | 
|  |  | 
|  | omap2_mcspi_set_master_mode(master); | 
|  | omap2_mcspi_disable_clocks(mcspi); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int omap_mcspi_runtime_resume(struct device *dev) | 
|  | { | 
|  | struct omap2_mcspi	*mcspi; | 
|  | struct spi_master	*master; | 
|  |  | 
|  | master = dev_get_drvdata(dev); | 
|  | mcspi = spi_master_get_devdata(master); | 
|  | omap2_mcspi_restore_ctx(mcspi); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int __init omap2_mcspi_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct spi_master	*master; | 
|  | struct omap2_mcspi_platform_config *pdata = pdev->dev.platform_data; | 
|  | struct omap2_mcspi	*mcspi; | 
|  | struct resource		*r; | 
|  | int			status = 0, i; | 
|  |  | 
|  | master = spi_alloc_master(&pdev->dev, sizeof *mcspi); | 
|  | if (master == NULL) { | 
|  | dev_dbg(&pdev->dev, "master allocation failed\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* the spi->mode bits understood by this driver: */ | 
|  | master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; | 
|  |  | 
|  | if (pdev->id != -1) | 
|  | master->bus_num = pdev->id; | 
|  |  | 
|  | master->setup = omap2_mcspi_setup; | 
|  | master->transfer = omap2_mcspi_transfer; | 
|  | master->cleanup = omap2_mcspi_cleanup; | 
|  | master->num_chipselect = pdata->num_cs; | 
|  |  | 
|  | dev_set_drvdata(&pdev->dev, master); | 
|  |  | 
|  | mcspi = spi_master_get_devdata(master); | 
|  | mcspi->master = master; | 
|  |  | 
|  | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (r == NULL) { | 
|  | status = -ENODEV; | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | r->start += pdata->regs_offset; | 
|  | r->end += pdata->regs_offset; | 
|  | mcspi->phys = r->start; | 
|  | if (!request_mem_region(r->start, resource_size(r), | 
|  | dev_name(&pdev->dev))) { | 
|  | status = -EBUSY; | 
|  | goto err1; | 
|  | } | 
|  |  | 
|  | mcspi->base = ioremap(r->start, resource_size(r)); | 
|  | if (!mcspi->base) { | 
|  | dev_dbg(&pdev->dev, "can't ioremap MCSPI\n"); | 
|  | status = -ENOMEM; | 
|  | goto err2; | 
|  | } | 
|  |  | 
|  | mcspi->dev = &pdev->dev; | 
|  | INIT_WORK(&mcspi->work, omap2_mcspi_work); | 
|  |  | 
|  | spin_lock_init(&mcspi->lock); | 
|  | INIT_LIST_HEAD(&mcspi->msg_queue); | 
|  | INIT_LIST_HEAD(&omap2_mcspi_ctx[master->bus_num - 1].cs); | 
|  |  | 
|  | mcspi->dma_channels = kcalloc(master->num_chipselect, | 
|  | sizeof(struct omap2_mcspi_dma), | 
|  | GFP_KERNEL); | 
|  |  | 
|  | if (mcspi->dma_channels == NULL) | 
|  | goto err2; | 
|  |  | 
|  | for (i = 0; i < master->num_chipselect; i++) { | 
|  | char dma_ch_name[14]; | 
|  | struct resource *dma_res; | 
|  |  | 
|  | sprintf(dma_ch_name, "rx%d", i); | 
|  | dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA, | 
|  | dma_ch_name); | 
|  | if (!dma_res) { | 
|  | dev_dbg(&pdev->dev, "cannot get DMA RX channel\n"); | 
|  | status = -ENODEV; | 
|  | break; | 
|  | } | 
|  |  | 
|  | mcspi->dma_channels[i].dma_rx_channel = -1; | 
|  | mcspi->dma_channels[i].dma_rx_sync_dev = dma_res->start; | 
|  | sprintf(dma_ch_name, "tx%d", i); | 
|  | dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA, | 
|  | dma_ch_name); | 
|  | if (!dma_res) { | 
|  | dev_dbg(&pdev->dev, "cannot get DMA TX channel\n"); | 
|  | status = -ENODEV; | 
|  | break; | 
|  | } | 
|  |  | 
|  | mcspi->dma_channels[i].dma_tx_channel = -1; | 
|  | mcspi->dma_channels[i].dma_tx_sync_dev = dma_res->start; | 
|  | } | 
|  |  | 
|  | pm_runtime_enable(&pdev->dev); | 
|  |  | 
|  | if (status || omap2_mcspi_master_setup(mcspi) < 0) | 
|  | goto err3; | 
|  |  | 
|  | status = spi_register_master(master); | 
|  | if (status < 0) | 
|  | goto err4; | 
|  |  | 
|  | return status; | 
|  |  | 
|  | err4: | 
|  | spi_master_put(master); | 
|  | err3: | 
|  | kfree(mcspi->dma_channels); | 
|  | err2: | 
|  | release_mem_region(r->start, resource_size(r)); | 
|  | iounmap(mcspi->base); | 
|  | err1: | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int __exit omap2_mcspi_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct spi_master	*master; | 
|  | struct omap2_mcspi	*mcspi; | 
|  | struct omap2_mcspi_dma	*dma_channels; | 
|  | struct resource		*r; | 
|  | void __iomem *base; | 
|  |  | 
|  | master = dev_get_drvdata(&pdev->dev); | 
|  | mcspi = spi_master_get_devdata(master); | 
|  | dma_channels = mcspi->dma_channels; | 
|  |  | 
|  | omap2_mcspi_disable_clocks(mcspi); | 
|  | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | release_mem_region(r->start, resource_size(r)); | 
|  |  | 
|  | base = mcspi->base; | 
|  | spi_unregister_master(master); | 
|  | iounmap(base); | 
|  | kfree(dma_channels); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* work with hotplug and coldplug */ | 
|  | MODULE_ALIAS("platform:omap2_mcspi"); | 
|  |  | 
|  | #ifdef	CONFIG_SUSPEND | 
|  | /* | 
|  | * When SPI wake up from off-mode, CS is in activate state. If it was in | 
|  | * unactive state when driver was suspend, then force it to unactive state at | 
|  | * wake up. | 
|  | */ | 
|  | static int omap2_mcspi_resume(struct device *dev) | 
|  | { | 
|  | struct spi_master	*master = dev_get_drvdata(dev); | 
|  | struct omap2_mcspi	*mcspi = spi_master_get_devdata(master); | 
|  | struct omap2_mcspi_cs *cs; | 
|  |  | 
|  | omap2_mcspi_enable_clocks(mcspi); | 
|  | list_for_each_entry(cs, &omap2_mcspi_ctx[master->bus_num - 1].cs, | 
|  | node) { | 
|  | if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE) == 0) { | 
|  |  | 
|  | /* | 
|  | * We need to toggle CS state for OMAP take this | 
|  | * change in account. | 
|  | */ | 
|  | MOD_REG_BIT(cs->chconf0, OMAP2_MCSPI_CHCONF_FORCE, 1); | 
|  | __raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0); | 
|  | MOD_REG_BIT(cs->chconf0, OMAP2_MCSPI_CHCONF_FORCE, 0); | 
|  | __raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0); | 
|  | } | 
|  | } | 
|  | omap2_mcspi_disable_clocks(mcspi); | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | #define	omap2_mcspi_resume	NULL | 
|  | #endif | 
|  |  | 
|  | static const struct dev_pm_ops omap2_mcspi_pm_ops = { | 
|  | .resume = omap2_mcspi_resume, | 
|  | .runtime_resume	= omap_mcspi_runtime_resume, | 
|  | }; | 
|  |  | 
|  | static struct platform_driver omap2_mcspi_driver = { | 
|  | .driver = { | 
|  | .name =		"omap2_mcspi", | 
|  | .owner =	THIS_MODULE, | 
|  | .pm =		&omap2_mcspi_pm_ops | 
|  | }, | 
|  | .remove =	__exit_p(omap2_mcspi_remove), | 
|  | }; | 
|  |  | 
|  |  | 
|  | static int __init omap2_mcspi_init(void) | 
|  | { | 
|  | omap2_mcspi_wq = create_singlethread_workqueue( | 
|  | omap2_mcspi_driver.driver.name); | 
|  | if (omap2_mcspi_wq == NULL) | 
|  | return -1; | 
|  | return platform_driver_probe(&omap2_mcspi_driver, omap2_mcspi_probe); | 
|  | } | 
|  | subsys_initcall(omap2_mcspi_init); | 
|  |  | 
|  | static void __exit omap2_mcspi_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&omap2_mcspi_driver); | 
|  |  | 
|  | destroy_workqueue(omap2_mcspi_wq); | 
|  | } | 
|  | module_exit(omap2_mcspi_exit); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); |