PCI: revert broken device warning
This reverts c519a5a7dab2d. That change added a warning about devices that
didn't respond correctly when sizing BARs, which helped diagnose broken
devices. But the test wasn't specific enough, so it also complained about
working devices with zero-size BARs, e.g.,
https://bugzilla.kernel.org/show_bug.cgi?id=15822
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 882bd8d..c82548a 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -174,19 +174,14 @@
pci_read_config_dword(dev, pos, &sz);
pci_write_config_dword(dev, pos, l);
- if (!sz)
- goto fail; /* BAR not implemented */
-
/*
* All bits set in sz means the device isn't working properly.
- * If it's a memory BAR or a ROM, bit 0 must be clear; if it's
- * an io BAR, bit 1 must be clear.
+ * If the BAR isn't implemented, all bits must be 0. If it's a
+ * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit
+ * 1 must be clear.
*/
- if (sz == 0xffffffff) {
- dev_err(&dev->dev, "reg %x: invalid size %#x; broken device?\n",
- pos, sz);
+ if (!sz || sz == 0xffffffff)
goto fail;
- }
/*
* I don't know how l can have all bits set. Copied from old code.
@@ -249,17 +244,13 @@
pos, res);
}
} else {
- u32 size = pci_size(l, sz, mask);
+ sz = pci_size(l, sz, mask);
- if (!size) {
- dev_err(&dev->dev, "reg %x: invalid size "
- "(l %#x sz %#x mask %#x); broken device?",
- pos, l, sz, mask);
+ if (!sz)
goto fail;
- }
res->start = l;
- res->end = l + size;
+ res->end = l + sz;
dev_printk(KERN_DEBUG, &dev->dev, "reg %x: %pR\n", pos, res);
}