isdn: whitespace coding style cleanup
isdn source code uses a not-current coding style.
Update the coding style used on a per-line basis
so that git diff -w shows only elided blank lines
at EOF.
Done with emacs and some scripts and some typing.
Built x86 allyesconfig.
No detected change in objdump -d or size.
Signed-off-by: Joe Perches <joe@perches.com>
diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c
index 159e8fa..017c67e 100644
--- a/drivers/isdn/hisax/st5481_usb.c
+++ b/drivers/isdn/hisax/st5481_usb.c
@@ -4,7 +4,7 @@
* Author Frode Isaksen
* Copyright 2001 by Frode Isaksen <fisaksen@bewan.com>
* 2001 by Kai Germaschewski <kai.germaschewski@gmx.de>
- *
+ *
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
@@ -36,13 +36,13 @@
}
if ((r_index = fifo_remove(&ctrl->msg_fifo.f)) < 0) {
- test_and_clear_bit(0,&ctrl->busy);
+ test_and_clear_bit(0, &ctrl->busy);
return;
- }
- urb->setup_packet =
+ }
+ urb->setup_packet =
(unsigned char *)&ctrl->msg_fifo.data[r_index];
-
- DBG(1,"request=0x%02x,value=0x%04x,index=%x",
+
+ DBG(1, "request=0x%02x,value=0x%04x,index=%x",
((struct ctrl_msg *)urb->setup_packet)->dr.bRequest,
((struct ctrl_msg *)urb->setup_packet)->dr.wValue,
((struct ctrl_msg *)urb->setup_packet)->dr.wIndex);
@@ -64,13 +64,13 @@
struct st5481_ctrl *ctrl = &adapter->ctrl;
int w_index;
struct ctrl_msg *ctrl_msg;
-
+
if ((w_index = fifo_add(&ctrl->msg_fifo.f)) < 0) {
WARNING("control msg FIFO full");
return;
}
- ctrl_msg = &ctrl->msg_fifo.data[w_index];
-
+ ctrl_msg = &ctrl->msg_fifo.data[w_index];
+
ctrl_msg->dr.bRequestType = requesttype;
ctrl_msg->dr.bRequest = request;
ctrl_msg->dr.wValue = cpu_to_le16p(&value);
@@ -86,11 +86,11 @@
* Asynchronous endpoint 0 device request.
*/
void st5481_usb_device_ctrl_msg(struct st5481_adapter *adapter,
- u8 request, u16 value,
- ctrl_complete_t complete, void *context)
+ u8 request, u16 value,
+ ctrl_complete_t complete, void *context)
{
- usb_ctrl_msg(adapter, request,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ usb_ctrl_msg(adapter, request,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
value, 0, complete, context);
}
@@ -98,10 +98,10 @@
* Asynchronous pipe reset (async version of usb_clear_halt).
*/
void st5481_usb_pipe_reset(struct st5481_adapter *adapter,
- u_char pipe,
- ctrl_complete_t complete, void *context)
+ u_char pipe,
+ ctrl_complete_t complete, void *context)
{
- DBG(1,"pipe=%02x",pipe);
+ DBG(1, "pipe=%02x", pipe);
usb_ctrl_msg(adapter,
USB_REQ_CLEAR_FEATURE, USB_DIR_OUT | USB_RECIP_ENDPOINT,
@@ -115,7 +115,7 @@
void st5481_ph_command(struct st5481_adapter *adapter, unsigned int command)
{
- DBG(8,"command=%s", ST5481_CMD_string(command));
+ DBG(8, "command=%s", ST5481_CMD_string(command));
st5481_usb_device_ctrl_msg(adapter, TXCI, command, NULL, NULL);
}
@@ -130,33 +130,33 @@
struct st5481_adapter *adapter = urb->context;
struct st5481_ctrl *ctrl = &adapter->ctrl;
struct ctrl_msg *ctrl_msg;
-
+
if (unlikely(urb->status < 0)) {
switch (urb->status) {
- case -ENOENT:
- case -ESHUTDOWN:
- case -ECONNRESET:
- DBG(1,"urb killed status %d", urb->status);
- return; // Give up
- default:
- WARNING("urb status %d",urb->status);
- break;
+ case -ENOENT:
+ case -ESHUTDOWN:
+ case -ECONNRESET:
+ DBG(1, "urb killed status %d", urb->status);
+ return; // Give up
+ default:
+ WARNING("urb status %d", urb->status);
+ break;
}
}
ctrl_msg = (struct ctrl_msg *)urb->setup_packet;
-
+
if (ctrl_msg->dr.bRequest == USB_REQ_CLEAR_FEATURE) {
- /* Special case handling for pipe reset */
+ /* Special case handling for pipe reset */
le16_to_cpus(&ctrl_msg->dr.wIndex);
usb_reset_endpoint(adapter->usb_dev, ctrl_msg->dr.wIndex);
}
-
+
if (ctrl_msg->complete)
ctrl_msg->complete(ctrl_msg->context);
clear_bit(0, &ctrl->busy);
-
+
// Try to send next control message
usb_next_ctrl_msg(urb, adapter);
return;
@@ -181,23 +181,23 @@
int status;
switch (urb->status) {
- case 0:
- /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* this urb is terminated, clean up */
- DBG(2, "urb shutting down with status: %d", urb->status);
- return;
- default:
- WARNING("nonzero urb status received: %d", urb->status);
- goto exit;
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ DBG(2, "urb shutting down with status: %d", urb->status);
+ return;
+ default:
+ WARNING("nonzero urb status received: %d", urb->status);
+ goto exit;
}
-
+
DBG_PACKET(2, data, INT_PKT_SIZE);
-
+
if (urb->actual_length == 0) {
goto exit;
}
@@ -214,7 +214,7 @@
FsmEvent(&adapter->d_out.fsm, EV_DOUT_UNDERRUN, NULL);
if (irqbyte & OUT_DOWN)
-;// printk("OUT_DOWN\n");
+ ;// printk("OUT_DOWN\n");
irqbyte = data[MPINT];
if (irqbyte & RXCI_INT)
@@ -226,7 +226,7 @@
urb->actual_length = 0;
exit:
- status = usb_submit_urb (urb, GFP_ATOMIC);
+ status = usb_submit_urb(urb, GFP_ATOMIC);
if (status)
WARNING("usb_submit_urb failed with result %d", status);
}
@@ -246,11 +246,11 @@
int status;
struct urb *urb;
u8 *buf;
-
- DBG(2,"");
-
- if ((status = usb_reset_configuration (dev)) < 0) {
- WARNING("reset_configuration failed,status=%d",status);
+
+ DBG(2, "");
+
+ if ((status = usb_reset_configuration(dev)) < 0) {
+ WARNING("reset_configuration failed,status=%d", status);
return status;
}
@@ -261,7 +261,7 @@
return -ENXIO;
// Check if the config is sane
- if ( altsetting->desc.bNumEndpoints != 7 ) {
+ if (altsetting->desc.bNumEndpoints != 7) {
WARNING("expecting 7 got %d endpoints!", altsetting->desc.bNumEndpoints);
return -EINVAL;
}
@@ -271,8 +271,8 @@
altsetting->endpoint[4].desc.wMaxPacketSize = __constant_cpu_to_le16(32);
// Use alternative setting 3 on interface 0 to have 2B+D
- if ((status = usb_set_interface (dev, 0, 3)) < 0) {
- WARNING("usb_set_interface failed,status=%d",status);
+ if ((status = usb_set_interface(dev, 0, 3)) < 0) {
+ WARNING("usb_set_interface failed,status=%d", status);
return status;
}
@@ -282,36 +282,36 @@
return -ENOMEM;
}
ctrl->urb = urb;
-
- // Fill the control URB
- usb_fill_control_urb (urb, dev,
- usb_sndctrlpipe(dev, 0),
- NULL, NULL, 0, usb_ctrl_complete, adapter);
-
+ // Fill the control URB
+ usb_fill_control_urb(urb, dev,
+ usb_sndctrlpipe(dev, 0),
+ NULL, NULL, 0, usb_ctrl_complete, adapter);
+
+
fifo_init(&ctrl->msg_fifo.f, ARRAY_SIZE(ctrl->msg_fifo.data));
// Allocate URBs and buffers for interrupt endpoint
urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!urb) {
+ if (!urb) {
return -ENOMEM;
}
intr->urb = urb;
-
+
buf = kmalloc(INT_PKT_SIZE, GFP_KERNEL);
if (!buf) {
return -ENOMEM;
}
endpoint = &altsetting->endpoint[EP_INT-1];
-
+
// Fill the interrupt URB
usb_fill_int_urb(urb, dev,
- usb_rcvintpipe(dev, endpoint->desc.bEndpointAddress),
- buf, INT_PKT_SIZE,
- usb_int_complete, adapter,
- endpoint->desc.bInterval);
-
+ usb_rcvintpipe(dev, endpoint->desc.bEndpointAddress),
+ buf, INT_PKT_SIZE,
+ usb_int_complete, adapter,
+ endpoint->desc.bInterval);
+
return 0;
}
@@ -324,7 +324,7 @@
struct st5481_intr *intr = &adapter->intr;
struct st5481_ctrl *ctrl = &adapter->ctrl;
- DBG(1,"");
+ DBG(1, "");
// Stop and free Control and Interrupt URBs
usb_kill_urb(ctrl->urb);
@@ -343,33 +343,33 @@
*/
void st5481_start(struct st5481_adapter *adapter)
{
- static const u8 init_cmd_table[]={
- SET_DEFAULT,0,
- STT,0,
- SDA_MIN,0x0d,
- SDA_MAX,0x29,
- SDELAY_VALUE,0x14,
- GPIO_DIR,0x01,
- GPIO_OUT,RED_LED,
+ static const u8 init_cmd_table[] = {
+ SET_DEFAULT, 0,
+ STT, 0,
+ SDA_MIN, 0x0d,
+ SDA_MAX, 0x29,
+ SDELAY_VALUE, 0x14,
+ GPIO_DIR, 0x01,
+ GPIO_OUT, RED_LED,
// FFCTRL_OUT_D,4,
// FFCTRH_OUT_D,12,
- FFCTRL_OUT_B1,6,
- FFCTRH_OUT_B1,20,
- FFCTRL_OUT_B2,6,
- FFCTRH_OUT_B2,20,
- MPMSK,RXCI_INT+DEN_INT+DCOLL_INT,
+ FFCTRL_OUT_B1, 6,
+ FFCTRH_OUT_B1, 20,
+ FFCTRL_OUT_B2, 6,
+ FFCTRH_OUT_B2, 20,
+ MPMSK, RXCI_INT + DEN_INT + DCOLL_INT,
0
- };
+ };
struct st5481_intr *intr = &adapter->intr;
int i = 0;
- u8 request,value;
+ u8 request, value;
- DBG(8,"");
+ DBG(8, "");
- adapter->leds = RED_LED;
+ adapter->leds = RED_LED;
// Start receiving on the interrupt endpoint
- SUBMIT_URB(intr->urb, GFP_KERNEL);
+ SUBMIT_URB(intr->urb, GFP_KERNEL);
while ((request = init_cmd_table[i++])) {
value = init_cmd_table[i++];
@@ -383,7 +383,7 @@
*/
void st5481_stop(struct st5481_adapter *adapter)
{
- DBG(8,"");
+ DBG(8, "");
st5481_usb_device_ctrl_msg(adapter, SET_DEFAULT, 0, NULL, NULL);
}
@@ -394,22 +394,22 @@
static void
fill_isoc_urb(struct urb *urb, struct usb_device *dev,
- unsigned int pipe, void *buf, int num_packets,
+ unsigned int pipe, void *buf, int num_packets,
int packet_size, usb_complete_t complete,
- void *context)
+ void *context)
{
int k;
- urb->dev=dev;
- urb->pipe=pipe;
+ urb->dev = dev;
+ urb->pipe = pipe;
urb->interval = 1;
- urb->transfer_buffer=buf;
+ urb->transfer_buffer = buf;
urb->number_of_packets = num_packets;
- urb->transfer_buffer_length=num_packets*packet_size;
+ urb->transfer_buffer_length = num_packets * packet_size;
urb->actual_length = 0;
- urb->complete=complete;
- urb->context=context;
- urb->transfer_flags=URB_ISO_ASAP;
+ urb->complete = complete;
+ urb->context = context;
+ urb->transfer_flags = URB_ISO_ASAP;
for (k = 0; k < num_packets; k++) {
urb->iso_frame_desc[k].offset = packet_size * k;
urb->iso_frame_desc[k].length = packet_size;
@@ -418,10 +418,10 @@
}
int
-st5481_setup_isocpipes(struct urb* urb[2], struct usb_device *dev,
- unsigned int pipe, int num_packets,
- int packet_size, int buf_size,
- usb_complete_t complete, void *context)
+st5481_setup_isocpipes(struct urb *urb[2], struct usb_device *dev,
+ unsigned int pipe, int num_packets,
+ int packet_size, int buf_size,
+ usb_complete_t complete, void *context)
{
int j, retval;
unsigned char *buf;
@@ -436,15 +436,15 @@
buf = kmalloc(buf_size, GFP_KERNEL);
if (!buf)
goto err;
-
+
// Fill the isochronous URB
- fill_isoc_urb(urb[j], dev, pipe, buf,
+ fill_isoc_urb(urb[j], dev, pipe, buf,
num_packets, packet_size, complete,
context);
}
return 0;
- err:
+err:
for (j = 0; j < 2; j++) {
if (urb[j]) {
kfree(urb[j]->transfer_buffer);
@@ -456,7 +456,7 @@
return retval;
}
-void st5481_release_isocpipes(struct urb* urb[2])
+void st5481_release_isocpipes(struct urb *urb[2])
{
int j;
@@ -471,8 +471,8 @@
/*
* Decode frames received on the B/D channel.
* Note that this function will be called continuously
- * with 64Kbit/s / 16Kbit/s of data and hence it will be
- * called 50 times per second with 20 ISOC descriptors.
+ * with 64Kbit/s / 16Kbit/s of data and hence it will be
+ * called 50 times per second with 20 ISOC descriptors.
* Called at interrupt.
*/
static void usb_in_complete(struct urb *urb)
@@ -484,18 +484,18 @@
if (unlikely(urb->status < 0)) {
switch (urb->status) {
- case -ENOENT:
- case -ESHUTDOWN:
- case -ECONNRESET:
- DBG(1,"urb killed status %d", urb->status);
- return; // Give up
- default:
- WARNING("urb status %d",urb->status);
- break;
+ case -ENOENT:
+ case -ESHUTDOWN:
+ case -ECONNRESET:
+ DBG(1, "urb killed status %d", urb->status);
+ return; // Give up
+ default:
+ WARNING("urb status %d", urb->status);
+ break;
}
}
- DBG_ISO_PACKET(0x80,urb);
+ DBG_ISO_PACKET(0x80, urb);
len = st5481_isoc_flatten(urb);
ptr = urb->transfer_buffer;
@@ -506,14 +506,14 @@
len = 0;
} else {
status = isdnhdlc_decode(&in->hdlc_state, ptr, len, &count,
- in->rcvbuf, in->bufsize);
+ in->rcvbuf, in->bufsize);
ptr += count;
len -= count;
}
-
+
if (status > 0) {
// Good frame received
- DBG(4,"count=%d",status);
+ DBG(4, "count=%d", status);
DBG_PACKET(0x400, in->rcvbuf, status);
if (!(skb = dev_alloc_skb(status))) {
WARNING("receive out of memory\n");
@@ -542,14 +542,14 @@
struct usb_device *dev = in->adapter->usb_dev;
int retval;
- DBG(4,"");
+ DBG(4, "");
in->rcvbuf = kmalloc(in->bufsize, GFP_KERNEL);
retval = -ENOMEM;
if (!in->rcvbuf)
goto err;
- retval = st5481_setup_isocpipes(in->urb, dev,
+ retval = st5481_setup_isocpipes(in->urb, dev,
usb_rcvisocpipe(dev, in->ep),
in->num_packets, in->packet_size,
in->num_packets * in->packet_size,
@@ -558,51 +558,51 @@
goto err_free;
return 0;
- err_free:
+err_free:
kfree(in->rcvbuf);
- err:
+err:
return retval;
}
void st5481_release_in(struct st5481_in *in)
{
- DBG(2,"");
+ DBG(2, "");
st5481_release_isocpipes(in->urb);
}
/*
* Make the transfer_buffer contiguous by
- * copying from the iso descriptors if necessary.
+ * copying from the iso descriptors if necessary.
*/
static int st5481_isoc_flatten(struct urb *urb)
{
- struct usb_iso_packet_descriptor *pipd,*pend;
- unsigned char *src,*dst;
+ struct usb_iso_packet_descriptor *pipd, *pend;
+ unsigned char *src, *dst;
unsigned int len;
-
+
if (urb->status < 0) {
return urb->status;
}
for (pipd = &urb->iso_frame_desc[0],
pend = &urb->iso_frame_desc[urb->number_of_packets],
- dst = urb->transfer_buffer;
- pipd < pend;
+ dst = urb->transfer_buffer;
+ pipd < pend;
pipd++) {
-
+
if (pipd->status < 0) {
return (pipd->status);
}
-
+
len = pipd->actual_length;
pipd->actual_length = 0;
- src = urb->transfer_buffer+pipd->offset;
+ src = urb->transfer_buffer + pipd->offset;
if (src != dst) {
// Need to copy since isoc buffers not full
while (len--) {
*dst++ = *src++;
- }
+ }
} else {
// No need to copy, just update destination buffer
dst += len;
@@ -617,7 +617,7 @@
struct st5481_in *in = context;
struct st5481_adapter *adapter = in->adapter;
- DBG(4,"");
+ DBG(4, "");
in->urb[0]->dev = adapter->usb_dev;
SUBMIT_URB(in->urb[0], GFP_KERNEL);
@@ -654,4 +654,3 @@
0, NULL, NULL);
}
}
-