isdn: whitespace coding style cleanup
isdn source code uses a not-current coding style.
Update the coding style used on a per-line basis
so that git diff -w shows only elided blank lines
at EOF.
Done with emacs and some scripts and some typing.
Built x86 allyesconfig.
No detected change in objdump -d or size.
Signed-off-by: Joe Perches <joe@perches.com>
diff --git a/drivers/isdn/hysdn/ince1pc.h b/drivers/isdn/hysdn/ince1pc.h
index 7a36694..cab6836 100644
--- a/drivers/isdn/hysdn/ince1pc.h
+++ b/drivers/isdn/hysdn/ince1pc.h
@@ -17,30 +17,30 @@
/* basic scalar definitions have same meanning,
* but their declaration location depends on environment
- */
+ */
-/*--------------------------------------channel numbers---------------------*/
+/*--------------------------------------channel numbers---------------------*/
#define CHAN_SYSTEM 0x0001 /* system channel (spooler to spooler) */
#define CHAN_ERRLOG 0x0005 /* error logger */
#define CHAN_CAPI 0x0064 /* CAPI interface */
#define CHAN_NDIS_DATA 0x1001 /* NDIS data transfer */
-/*--------------------------------------POF ready msg-----------------------*/
- /* NOTE: after booting POF sends system ready message to PC: */
+/*--------------------------------------POF ready msg-----------------------*/
+/* NOTE: after booting POF sends system ready message to PC: */
#define RDY_MAGIC 0x52535953UL /* 'SYSR' reversed */
#define RDY_MAGIC_SIZE 4 /* size in bytes */
#define MAX_N_TOK_BYTES 255
#define MIN_RDY_MSG_SIZE RDY_MAGIC_SIZE
-#define MAX_RDY_MSG_SIZE (RDY_MAGIC_SIZE+MAX_N_TOK_BYTES)
+#define MAX_RDY_MSG_SIZE (RDY_MAGIC_SIZE + MAX_N_TOK_BYTES)
#define SYSR_TOK_END 0
#define SYSR_TOK_B_CHAN 1 /* nr. of B-Channels; DataLen=1; def: 2 */
#define SYSR_TOK_FAX_CHAN 2 /* nr. of FAX Channels; DataLen=1; def: 0 */
#define SYSR_TOK_MAC_ADDR 3 /* MAC-Address; DataLen=6; def: auto */
#define SYSR_TOK_ESC 255 /* undefined data size yet */
- /* default values, if not corrected by token: */
+/* default values, if not corrected by token: */
#define SYSR_TOK_B_CHAN_DEF 2 /* assume 2 B-Channels */
#define SYSR_TOK_FAX_CHAN_DEF 1 /* assume 1 FAX Channel */
@@ -70,31 +70,31 @@
*
* note:
* - for 16-bit FIFO add padding 0 byte to achieve even token data bytes!
- */
+ */
-/*--------------------------------------error logger------------------------*/
- /* note: pof needs final 0 ! */
+/*--------------------------------------error logger------------------------*/
+/* note: pof needs final 0 ! */
#define ERRLOG_CMD_REQ "ERRLOG ON"
#define ERRLOG_CMD_REQ_SIZE 10 /* with final 0 byte ! */
#define ERRLOG_CMD_STOP "ERRLOG OFF"
#define ERRLOG_CMD_STOP_SIZE 11 /* with final 0 byte ! */
#define ERRLOG_ENTRY_SIZE 64 /* sizeof(tErrLogEntry) */
- /* remaining text size = 55 */
-#define ERRLOG_TEXT_SIZE (ERRLOG_ENTRY_SIZE-2*4-1)
+ /* remaining text size = 55 */
+#define ERRLOG_TEXT_SIZE (ERRLOG_ENTRY_SIZE - 2 * 4 - 1)
typedef struct ErrLogEntry_tag {
-
-/*00 */ unsigned long ulErrType;
-
-/*04 */ unsigned long ulErrSubtype;
-
-/*08 */ unsigned char ucTextSize;
-
+
+ /*00 */ unsigned long ulErrType;
+
+ /*04 */ unsigned long ulErrSubtype;
+
+ /*08 */ unsigned char ucTextSize;
+
/*09 */ unsigned char ucText[ERRLOG_TEXT_SIZE];
/* ASCIIZ of len ucTextSize-1 */
-
-/*40 */
+
+/*40 */
} tErrLogEntry;
@@ -104,30 +104,30 @@
#endif /* */
#endif /* */
-/*--------------------------------------DPRAM boot spooler------------------*/
- /* this is the struture used between pc and
- * hyperstone to exchange boot data
- */
+/*--------------------------------------DPRAM boot spooler------------------*/
+/* this is the struture used between pc and
+ * hyperstone to exchange boot data
+ */
#define DPRAM_SPOOLER_DATA_SIZE 0x20
typedef struct DpramBootSpooler_tag {
-
-/*00 */ unsigned char Len;
-
-/*01 */ volatile unsigned char RdPtr;
-
-/*02 */ unsigned char WrPtr;
-
-/*03 */ unsigned char Data[DPRAM_SPOOLER_DATA_SIZE];
-
-/*23 */
+
+ /*00 */ unsigned char Len;
+
+ /*01 */ volatile unsigned char RdPtr;
+
+ /*02 */ unsigned char WrPtr;
+
+ /*03 */ unsigned char Data[DPRAM_SPOOLER_DATA_SIZE];
+
+/*23 */
} tDpramBootSpooler;
#define DPRAM_SPOOLER_MIN_SIZE 5 /* Len+RdPtr+Wrptr+2*data */
#define DPRAM_SPOOLER_DEF_SIZE 0x23 /* current default size */
-/*--------------------------------------HYCARD/ERGO DPRAM SoftUart----------*/
- /* at DPRAM offset 0x1C00: */
+/*--------------------------------------HYCARD/ERGO DPRAM SoftUart----------*/
+/* at DPRAM offset 0x1C00: */
#define SIZE_RSV_SOFT_UART 0x1B0 /* 432 bytes reserved for SoftUart */