ARM: move vector stubs
Move the machine vector stubs into the page above the vector page,
which we can prevent from being visible to userspace. Also move
the reset stub, and place the swi vector at a location that the
'ldr' can get to it.
This hides pointers into the kernel which could give valuable
information to attackers, and reduces the number of exploitable
instructions at a fixed address.
Cc: <stable@vger.kernel.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Git-commit: 19accfd373847ac3d10623c5d20f948846299741
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
ARM: use linker magic for vectors and vector stubs
Use linker magic to create the vectors and vector stubs: we can tell the
linker to place them at an appropriate VMA, but keep the LMA within the
kernel. This gets rid of some unnecessary symbol manipulation, and
have the linker calculate the relocations appropriately.
Change-Id: I694f6b651e60fccd7e3c818f981a3883f9c212de
Cc: <stable@vger.kernel.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Git-commit: b9b32bf70f2fb710b07c94e13afbc729afe221da
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
[joonwoop@codeaurora.org: squashed 19accfd and b9b32bf because 19accfd
broke build]
CRs-fixed: 561044
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 4c6bda4..b69f1e7 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -1054,9 +1054,9 @@
/*
* Vector stubs.
*
- * This code is copied to 0xffff0200 so we can use branches in the
- * vectors, rather than ldr's. Note that this code must not
- * exceed 0x300 bytes.
+ * This code is copied to 0xffff1000 so we can use branches in the
+ * vectors, rather than ldr's. Note that this code must not exceed
+ * a page size.
*
* Common stub entry macro:
* Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
@@ -1115,8 +1115,17 @@
1:
.endm
- .globl __stubs_start
+ .section .stubs, "ax", %progbits
__stubs_start:
+ @ This must be the first word
+ .word vector_swi
+
+vector_rst:
+ ARM( swi SYS_ERROR0 )
+ THUMB( svc #0 )
+ THUMB( nop )
+ b vector_und
+
/*
* Interrupt dispatcher
*/
@@ -1211,6 +1220,16 @@
.align 5
/*=============================================================================
+ * Address exception handler
+ *-----------------------------------------------------------------------------
+ * These aren't too critical.
+ * (they're not supposed to happen, and won't happen in 32-bit data mode).
+ */
+
+vector_addrexcptn:
+ b vector_addrexcptn
+
+/*=============================================================================
* Undefined FIQs
*-----------------------------------------------------------------------------
* Enter in FIQ mode, spsr = ANY CPSR, lr = ANY PC
@@ -1223,47 +1242,19 @@
vector_fiq:
subs pc, lr, #4
-/*=============================================================================
- * Address exception handler
- *-----------------------------------------------------------------------------
- * These aren't too critical.
- * (they're not supposed to happen, and won't happen in 32-bit data mode).
- */
-
-vector_addrexcptn:
- b vector_addrexcptn
-
-/*
- * We group all the following data together to optimise
- * for CPUs with separate I & D caches.
- */
- .align 5
-
-.LCvswi:
- .word vector_swi
.krait_fixup:
.word msm_krait_need_wfe_fixup
- .globl __stubs_end
-__stubs_end:
-
- .equ stubs_offset, __vectors_start + 0x200 - __stubs_start
-
- .globl __vectors_start
+ .section .vectors, "ax", %progbits
__vectors_start:
- ARM( swi SYS_ERROR0 )
- THUMB( svc #0 )
- THUMB( nop )
- W(b) vector_und + stubs_offset
- W(ldr) pc, .LCvswi + stubs_offset
- W(b) vector_pabt + stubs_offset
- W(b) vector_dabt + stubs_offset
- W(b) vector_addrexcptn + stubs_offset
- W(b) vector_irq + stubs_offset
- W(b) vector_fiq + stubs_offset
-
- .globl __vectors_end
-__vectors_end:
+ W(b) vector_rst
+ W(b) vector_und
+ W(ldr) pc, __vectors_start + 0x1000
+ W(b) vector_pabt
+ W(b) vector_dabt
+ W(b) vector_addrexcptn
+ W(b) vector_irq
+ W(b) vector_fiq
.data
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 128fd13..6c05ccc 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -848,7 +848,7 @@
* are visible to the instruction stream.
*/
memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start);
- memcpy((void *)vectors + 0x200, __stubs_start, __stubs_end - __stubs_start);
+ memcpy((void *)vectors + 0x1000, __stubs_start, __stubs_end - __stubs_start);
memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
/*
@@ -865,6 +865,6 @@
memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE),
syscall_restart_code, sizeof(syscall_restart_code));
- flush_icache_range(vectors, vectors + PAGE_SIZE);
+ flush_icache_range(vectors, vectors + PAGE_SIZE * 2);
modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
}
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 7d767c3..8516884 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -148,6 +148,23 @@
#endif
__init_begin = .;
#endif
+ /*
+ * The vectors and stubs are relocatable code, and the
+ * only thing that matters is their relative offsets
+ */
+ __vectors_start = .;
+ .vectors 0 : AT(__vectors_start) {
+ *(.vectors)
+ }
+ . = __vectors_start + SIZEOF(.vectors);
+ __vectors_end = .;
+
+ __stubs_start = .;
+ .stubs 0x1000 : AT(__stubs_start) {
+ *(.stubs)
+ }
+ . = __stubs_start + SIZEOF(.stubs);
+ __stubs_end = .;
INIT_TEXT_SECTION(8)
.exit.text : {