|  | /*  D-Link DL2000-based Gigabit Ethernet Adapter Linux driver */ | 
|  | /* | 
|  | Copyright (c) 2001, 2002 by D-Link Corporation | 
|  | Written by Edward Peng.<edward_peng@dlink.com.tw> | 
|  | Created 03-May-2001, base on Linux' sundance.c. | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify | 
|  | it under the terms of the GNU General Public License as published by | 
|  | the Free Software Foundation; either version 2 of the License, or | 
|  | (at your option) any later version. | 
|  | */ | 
|  |  | 
|  | #define DRV_NAME	"DL2000/TC902x-based linux driver" | 
|  | #define DRV_VERSION	"v1.19" | 
|  | #define DRV_RELDATE	"2007/08/12" | 
|  | #include "dl2k.h" | 
|  | #include <linux/dma-mapping.h> | 
|  |  | 
|  | static char version[] __devinitdata = | 
|  | KERN_INFO DRV_NAME " " DRV_VERSION " " DRV_RELDATE "\n"; | 
|  | #define MAX_UNITS 8 | 
|  | static int mtu[MAX_UNITS]; | 
|  | static int vlan[MAX_UNITS]; | 
|  | static int jumbo[MAX_UNITS]; | 
|  | static char *media[MAX_UNITS]; | 
|  | static int tx_flow=-1; | 
|  | static int rx_flow=-1; | 
|  | static int copy_thresh; | 
|  | static int rx_coalesce=10;	/* Rx frame count each interrupt */ | 
|  | static int rx_timeout=200;	/* Rx DMA wait time in 640ns increments */ | 
|  | static int tx_coalesce=16;	/* HW xmit count each TxDMAComplete */ | 
|  |  | 
|  |  | 
|  | MODULE_AUTHOR ("Edward Peng"); | 
|  | MODULE_DESCRIPTION ("D-Link DL2000-based Gigabit Ethernet Adapter"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | module_param_array(mtu, int, NULL, 0); | 
|  | module_param_array(media, charp, NULL, 0); | 
|  | module_param_array(vlan, int, NULL, 0); | 
|  | module_param_array(jumbo, int, NULL, 0); | 
|  | module_param(tx_flow, int, 0); | 
|  | module_param(rx_flow, int, 0); | 
|  | module_param(copy_thresh, int, 0); | 
|  | module_param(rx_coalesce, int, 0);	/* Rx frame count each interrupt */ | 
|  | module_param(rx_timeout, int, 0);	/* Rx DMA wait time in 64ns increments */ | 
|  | module_param(tx_coalesce, int, 0); /* HW xmit count each TxDMAComplete */ | 
|  |  | 
|  |  | 
|  | /* Enable the default interrupts */ | 
|  | #define DEFAULT_INTR (RxDMAComplete | HostError | IntRequested | TxDMAComplete| \ | 
|  | UpdateStats | LinkEvent) | 
|  | #define EnableInt() \ | 
|  | writew(DEFAULT_INTR, ioaddr + IntEnable) | 
|  |  | 
|  | static const int max_intrloop = 50; | 
|  | static const int multicast_filter_limit = 0x40; | 
|  |  | 
|  | static int rio_open (struct net_device *dev); | 
|  | static void rio_timer (unsigned long data); | 
|  | static void rio_tx_timeout (struct net_device *dev); | 
|  | static void alloc_list (struct net_device *dev); | 
|  | static netdev_tx_t start_xmit (struct sk_buff *skb, struct net_device *dev); | 
|  | static irqreturn_t rio_interrupt (int irq, void *dev_instance); | 
|  | static void rio_free_tx (struct net_device *dev, int irq); | 
|  | static void tx_error (struct net_device *dev, int tx_status); | 
|  | static int receive_packet (struct net_device *dev); | 
|  | static void rio_error (struct net_device *dev, int int_status); | 
|  | static int change_mtu (struct net_device *dev, int new_mtu); | 
|  | static void set_multicast (struct net_device *dev); | 
|  | static struct net_device_stats *get_stats (struct net_device *dev); | 
|  | static int clear_stats (struct net_device *dev); | 
|  | static int rio_ioctl (struct net_device *dev, struct ifreq *rq, int cmd); | 
|  | static int rio_close (struct net_device *dev); | 
|  | static int find_miiphy (struct net_device *dev); | 
|  | static int parse_eeprom (struct net_device *dev); | 
|  | static int read_eeprom (long ioaddr, int eep_addr); | 
|  | static int mii_wait_link (struct net_device *dev, int wait); | 
|  | static int mii_set_media (struct net_device *dev); | 
|  | static int mii_get_media (struct net_device *dev); | 
|  | static int mii_set_media_pcs (struct net_device *dev); | 
|  | static int mii_get_media_pcs (struct net_device *dev); | 
|  | static int mii_read (struct net_device *dev, int phy_addr, int reg_num); | 
|  | static int mii_write (struct net_device *dev, int phy_addr, int reg_num, | 
|  | u16 data); | 
|  |  | 
|  | static const struct ethtool_ops ethtool_ops; | 
|  |  | 
|  | static const struct net_device_ops netdev_ops = { | 
|  | .ndo_open		= rio_open, | 
|  | .ndo_start_xmit	= start_xmit, | 
|  | .ndo_stop		= rio_close, | 
|  | .ndo_get_stats		= get_stats, | 
|  | .ndo_validate_addr	= eth_validate_addr, | 
|  | .ndo_set_mac_address 	= eth_mac_addr, | 
|  | .ndo_set_rx_mode	= set_multicast, | 
|  | .ndo_do_ioctl		= rio_ioctl, | 
|  | .ndo_tx_timeout		= rio_tx_timeout, | 
|  | .ndo_change_mtu		= change_mtu, | 
|  | }; | 
|  |  | 
|  | static int __devinit | 
|  | rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent) | 
|  | { | 
|  | struct net_device *dev; | 
|  | struct netdev_private *np; | 
|  | static int card_idx; | 
|  | int chip_idx = ent->driver_data; | 
|  | int err, irq; | 
|  | long ioaddr; | 
|  | static int version_printed; | 
|  | void *ring_space; | 
|  | dma_addr_t ring_dma; | 
|  |  | 
|  | if (!version_printed++) | 
|  | printk ("%s", version); | 
|  |  | 
|  | err = pci_enable_device (pdev); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | irq = pdev->irq; | 
|  | err = pci_request_regions (pdev, "dl2k"); | 
|  | if (err) | 
|  | goto err_out_disable; | 
|  |  | 
|  | pci_set_master (pdev); | 
|  | dev = alloc_etherdev (sizeof (*np)); | 
|  | if (!dev) { | 
|  | err = -ENOMEM; | 
|  | goto err_out_res; | 
|  | } | 
|  | SET_NETDEV_DEV(dev, &pdev->dev); | 
|  |  | 
|  | #ifdef MEM_MAPPING | 
|  | ioaddr = pci_resource_start (pdev, 1); | 
|  | ioaddr = (long) ioremap (ioaddr, RIO_IO_SIZE); | 
|  | if (!ioaddr) { | 
|  | err = -ENOMEM; | 
|  | goto err_out_dev; | 
|  | } | 
|  | #else | 
|  | ioaddr = pci_resource_start (pdev, 0); | 
|  | #endif | 
|  | dev->base_addr = ioaddr; | 
|  | dev->irq = irq; | 
|  | np = netdev_priv(dev); | 
|  | np->chip_id = chip_idx; | 
|  | np->pdev = pdev; | 
|  | spin_lock_init (&np->tx_lock); | 
|  | spin_lock_init (&np->rx_lock); | 
|  |  | 
|  | /* Parse manual configuration */ | 
|  | np->an_enable = 1; | 
|  | np->tx_coalesce = 1; | 
|  | if (card_idx < MAX_UNITS) { | 
|  | if (media[card_idx] != NULL) { | 
|  | np->an_enable = 0; | 
|  | if (strcmp (media[card_idx], "auto") == 0 || | 
|  | strcmp (media[card_idx], "autosense") == 0 || | 
|  | strcmp (media[card_idx], "0") == 0 ) { | 
|  | np->an_enable = 2; | 
|  | } else if (strcmp (media[card_idx], "100mbps_fd") == 0 || | 
|  | strcmp (media[card_idx], "4") == 0) { | 
|  | np->speed = 100; | 
|  | np->full_duplex = 1; | 
|  | } else if (strcmp (media[card_idx], "100mbps_hd") == 0 || | 
|  | strcmp (media[card_idx], "3") == 0) { | 
|  | np->speed = 100; | 
|  | np->full_duplex = 0; | 
|  | } else if (strcmp (media[card_idx], "10mbps_fd") == 0 || | 
|  | strcmp (media[card_idx], "2") == 0) { | 
|  | np->speed = 10; | 
|  | np->full_duplex = 1; | 
|  | } else if (strcmp (media[card_idx], "10mbps_hd") == 0 || | 
|  | strcmp (media[card_idx], "1") == 0) { | 
|  | np->speed = 10; | 
|  | np->full_duplex = 0; | 
|  | } else if (strcmp (media[card_idx], "1000mbps_fd") == 0 || | 
|  | strcmp (media[card_idx], "6") == 0) { | 
|  | np->speed=1000; | 
|  | np->full_duplex=1; | 
|  | } else if (strcmp (media[card_idx], "1000mbps_hd") == 0 || | 
|  | strcmp (media[card_idx], "5") == 0) { | 
|  | np->speed = 1000; | 
|  | np->full_duplex = 0; | 
|  | } else { | 
|  | np->an_enable = 1; | 
|  | } | 
|  | } | 
|  | if (jumbo[card_idx] != 0) { | 
|  | np->jumbo = 1; | 
|  | dev->mtu = MAX_JUMBO; | 
|  | } else { | 
|  | np->jumbo = 0; | 
|  | if (mtu[card_idx] > 0 && mtu[card_idx] < PACKET_SIZE) | 
|  | dev->mtu = mtu[card_idx]; | 
|  | } | 
|  | np->vlan = (vlan[card_idx] > 0 && vlan[card_idx] < 4096) ? | 
|  | vlan[card_idx] : 0; | 
|  | if (rx_coalesce > 0 && rx_timeout > 0) { | 
|  | np->rx_coalesce = rx_coalesce; | 
|  | np->rx_timeout = rx_timeout; | 
|  | np->coalesce = 1; | 
|  | } | 
|  | np->tx_flow = (tx_flow == 0) ? 0 : 1; | 
|  | np->rx_flow = (rx_flow == 0) ? 0 : 1; | 
|  |  | 
|  | if (tx_coalesce < 1) | 
|  | tx_coalesce = 1; | 
|  | else if (tx_coalesce > TX_RING_SIZE-1) | 
|  | tx_coalesce = TX_RING_SIZE - 1; | 
|  | } | 
|  | dev->netdev_ops = &netdev_ops; | 
|  | dev->watchdog_timeo = TX_TIMEOUT; | 
|  | SET_ETHTOOL_OPS(dev, ðtool_ops); | 
|  | #if 0 | 
|  | dev->features = NETIF_F_IP_CSUM; | 
|  | #endif | 
|  | pci_set_drvdata (pdev, dev); | 
|  |  | 
|  | ring_space = pci_alloc_consistent (pdev, TX_TOTAL_SIZE, &ring_dma); | 
|  | if (!ring_space) | 
|  | goto err_out_iounmap; | 
|  | np->tx_ring = ring_space; | 
|  | np->tx_ring_dma = ring_dma; | 
|  |  | 
|  | ring_space = pci_alloc_consistent (pdev, RX_TOTAL_SIZE, &ring_dma); | 
|  | if (!ring_space) | 
|  | goto err_out_unmap_tx; | 
|  | np->rx_ring = ring_space; | 
|  | np->rx_ring_dma = ring_dma; | 
|  |  | 
|  | /* Parse eeprom data */ | 
|  | parse_eeprom (dev); | 
|  |  | 
|  | /* Find PHY address */ | 
|  | err = find_miiphy (dev); | 
|  | if (err) | 
|  | goto err_out_unmap_rx; | 
|  |  | 
|  | /* Fiber device? */ | 
|  | np->phy_media = (readw(ioaddr + ASICCtrl) & PhyMedia) ? 1 : 0; | 
|  | np->link_status = 0; | 
|  | /* Set media and reset PHY */ | 
|  | if (np->phy_media) { | 
|  | /* default Auto-Negotiation for fiber deivices */ | 
|  | if (np->an_enable == 2) { | 
|  | np->an_enable = 1; | 
|  | } | 
|  | mii_set_media_pcs (dev); | 
|  | } else { | 
|  | /* Auto-Negotiation is mandatory for 1000BASE-T, | 
|  | IEEE 802.3ab Annex 28D page 14 */ | 
|  | if (np->speed == 1000) | 
|  | np->an_enable = 1; | 
|  | mii_set_media (dev); | 
|  | } | 
|  |  | 
|  | err = register_netdev (dev); | 
|  | if (err) | 
|  | goto err_out_unmap_rx; | 
|  |  | 
|  | card_idx++; | 
|  |  | 
|  | printk (KERN_INFO "%s: %s, %pM, IRQ %d\n", | 
|  | dev->name, np->name, dev->dev_addr, irq); | 
|  | if (tx_coalesce > 1) | 
|  | printk(KERN_INFO "tx_coalesce:\t%d packets\n", | 
|  | tx_coalesce); | 
|  | if (np->coalesce) | 
|  | printk(KERN_INFO | 
|  | "rx_coalesce:\t%d packets\n" | 
|  | "rx_timeout: \t%d ns\n", | 
|  | np->rx_coalesce, np->rx_timeout*640); | 
|  | if (np->vlan) | 
|  | printk(KERN_INFO "vlan(id):\t%d\n", np->vlan); | 
|  | return 0; | 
|  |  | 
|  | err_out_unmap_rx: | 
|  | pci_free_consistent (pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma); | 
|  | err_out_unmap_tx: | 
|  | pci_free_consistent (pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma); | 
|  | err_out_iounmap: | 
|  | #ifdef MEM_MAPPING | 
|  | iounmap ((void *) ioaddr); | 
|  |  | 
|  | err_out_dev: | 
|  | #endif | 
|  | free_netdev (dev); | 
|  |  | 
|  | err_out_res: | 
|  | pci_release_regions (pdev); | 
|  |  | 
|  | err_out_disable: | 
|  | pci_disable_device (pdev); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int | 
|  | find_miiphy (struct net_device *dev) | 
|  | { | 
|  | int i, phy_found = 0; | 
|  | struct netdev_private *np; | 
|  | long ioaddr; | 
|  | np = netdev_priv(dev); | 
|  | ioaddr = dev->base_addr; | 
|  | np->phy_addr = 1; | 
|  |  | 
|  | for (i = 31; i >= 0; i--) { | 
|  | int mii_status = mii_read (dev, i, 1); | 
|  | if (mii_status != 0xffff && mii_status != 0x0000) { | 
|  | np->phy_addr = i; | 
|  | phy_found++; | 
|  | } | 
|  | } | 
|  | if (!phy_found) { | 
|  | printk (KERN_ERR "%s: No MII PHY found!\n", dev->name); | 
|  | return -ENODEV; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | parse_eeprom (struct net_device *dev) | 
|  | { | 
|  | int i, j; | 
|  | long ioaddr = dev->base_addr; | 
|  | u8 sromdata[256]; | 
|  | u8 *psib; | 
|  | u32 crc; | 
|  | PSROM_t psrom = (PSROM_t) sromdata; | 
|  | struct netdev_private *np = netdev_priv(dev); | 
|  |  | 
|  | int cid, next; | 
|  |  | 
|  | #ifdef	MEM_MAPPING | 
|  | ioaddr = pci_resource_start (np->pdev, 0); | 
|  | #endif | 
|  | /* Read eeprom */ | 
|  | for (i = 0; i < 128; i++) { | 
|  | ((__le16 *) sromdata)[i] = cpu_to_le16(read_eeprom (ioaddr, i)); | 
|  | } | 
|  | #ifdef	MEM_MAPPING | 
|  | ioaddr = dev->base_addr; | 
|  | #endif | 
|  | if (np->pdev->vendor == PCI_VENDOR_ID_DLINK) {	/* D-Link Only */ | 
|  | /* Check CRC */ | 
|  | crc = ~ether_crc_le (256 - 4, sromdata); | 
|  | if (psrom->crc != cpu_to_le32(crc)) { | 
|  | printk (KERN_ERR "%s: EEPROM data CRC error.\n", | 
|  | dev->name); | 
|  | return -1; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Set MAC address */ | 
|  | for (i = 0; i < 6; i++) | 
|  | dev->dev_addr[i] = psrom->mac_addr[i]; | 
|  |  | 
|  | if (np->pdev->vendor != PCI_VENDOR_ID_DLINK) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Parse Software Information Block */ | 
|  | i = 0x30; | 
|  | psib = (u8 *) sromdata; | 
|  | do { | 
|  | cid = psib[i++]; | 
|  | next = psib[i++]; | 
|  | if ((cid == 0 && next == 0) || (cid == 0xff && next == 0xff)) { | 
|  | printk (KERN_ERR "Cell data error\n"); | 
|  | return -1; | 
|  | } | 
|  | switch (cid) { | 
|  | case 0:	/* Format version */ | 
|  | break; | 
|  | case 1:	/* End of cell */ | 
|  | return 0; | 
|  | case 2:	/* Duplex Polarity */ | 
|  | np->duplex_polarity = psib[i]; | 
|  | writeb (readb (ioaddr + PhyCtrl) | psib[i], | 
|  | ioaddr + PhyCtrl); | 
|  | break; | 
|  | case 3:	/* Wake Polarity */ | 
|  | np->wake_polarity = psib[i]; | 
|  | break; | 
|  | case 9:	/* Adapter description */ | 
|  | j = (next - i > 255) ? 255 : next - i; | 
|  | memcpy (np->name, &(psib[i]), j); | 
|  | break; | 
|  | case 4: | 
|  | case 5: | 
|  | case 6: | 
|  | case 7: | 
|  | case 8:	/* Reversed */ | 
|  | break; | 
|  | default:	/* Unknown cell */ | 
|  | return -1; | 
|  | } | 
|  | i = next; | 
|  | } while (1); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | rio_open (struct net_device *dev) | 
|  | { | 
|  | struct netdev_private *np = netdev_priv(dev); | 
|  | long ioaddr = dev->base_addr; | 
|  | int i; | 
|  | u16 macctrl; | 
|  |  | 
|  | i = request_irq (dev->irq, rio_interrupt, IRQF_SHARED, dev->name, dev); | 
|  | if (i) | 
|  | return i; | 
|  |  | 
|  | /* Reset all logic functions */ | 
|  | writew (GlobalReset | DMAReset | FIFOReset | NetworkReset | HostReset, | 
|  | ioaddr + ASICCtrl + 2); | 
|  | mdelay(10); | 
|  |  | 
|  | /* DebugCtrl bit 4, 5, 9 must set */ | 
|  | writel (readl (ioaddr + DebugCtrl) | 0x0230, ioaddr + DebugCtrl); | 
|  |  | 
|  | /* Jumbo frame */ | 
|  | if (np->jumbo != 0) | 
|  | writew (MAX_JUMBO+14, ioaddr + MaxFrameSize); | 
|  |  | 
|  | alloc_list (dev); | 
|  |  | 
|  | /* Get station address */ | 
|  | for (i = 0; i < 6; i++) | 
|  | writeb (dev->dev_addr[i], ioaddr + StationAddr0 + i); | 
|  |  | 
|  | set_multicast (dev); | 
|  | if (np->coalesce) { | 
|  | writel (np->rx_coalesce | np->rx_timeout << 16, | 
|  | ioaddr + RxDMAIntCtrl); | 
|  | } | 
|  | /* Set RIO to poll every N*320nsec. */ | 
|  | writeb (0x20, ioaddr + RxDMAPollPeriod); | 
|  | writeb (0xff, ioaddr + TxDMAPollPeriod); | 
|  | writeb (0x30, ioaddr + RxDMABurstThresh); | 
|  | writeb (0x30, ioaddr + RxDMAUrgentThresh); | 
|  | writel (0x0007ffff, ioaddr + RmonStatMask); | 
|  | /* clear statistics */ | 
|  | clear_stats (dev); | 
|  |  | 
|  | /* VLAN supported */ | 
|  | if (np->vlan) { | 
|  | /* priority field in RxDMAIntCtrl  */ | 
|  | writel (readl(ioaddr + RxDMAIntCtrl) | 0x7 << 10, | 
|  | ioaddr + RxDMAIntCtrl); | 
|  | /* VLANId */ | 
|  | writew (np->vlan, ioaddr + VLANId); | 
|  | /* Length/Type should be 0x8100 */ | 
|  | writel (0x8100 << 16 | np->vlan, ioaddr + VLANTag); | 
|  | /* Enable AutoVLANuntagging, but disable AutoVLANtagging. | 
|  | VLAN information tagged by TFC' VID, CFI fields. */ | 
|  | writel (readl (ioaddr + MACCtrl) | AutoVLANuntagging, | 
|  | ioaddr + MACCtrl); | 
|  | } | 
|  |  | 
|  | init_timer (&np->timer); | 
|  | np->timer.expires = jiffies + 1*HZ; | 
|  | np->timer.data = (unsigned long) dev; | 
|  | np->timer.function = rio_timer; | 
|  | add_timer (&np->timer); | 
|  |  | 
|  | /* Start Tx/Rx */ | 
|  | writel (readl (ioaddr + MACCtrl) | StatsEnable | RxEnable | TxEnable, | 
|  | ioaddr + MACCtrl); | 
|  |  | 
|  | macctrl = 0; | 
|  | macctrl |= (np->vlan) ? AutoVLANuntagging : 0; | 
|  | macctrl |= (np->full_duplex) ? DuplexSelect : 0; | 
|  | macctrl |= (np->tx_flow) ? TxFlowControlEnable : 0; | 
|  | macctrl |= (np->rx_flow) ? RxFlowControlEnable : 0; | 
|  | writew(macctrl,	ioaddr + MACCtrl); | 
|  |  | 
|  | netif_start_queue (dev); | 
|  |  | 
|  | /* Enable default interrupts */ | 
|  | EnableInt (); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void | 
|  | rio_timer (unsigned long data) | 
|  | { | 
|  | struct net_device *dev = (struct net_device *)data; | 
|  | struct netdev_private *np = netdev_priv(dev); | 
|  | unsigned int entry; | 
|  | int next_tick = 1*HZ; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&np->rx_lock, flags); | 
|  | /* Recover rx ring exhausted error */ | 
|  | if (np->cur_rx - np->old_rx >= RX_RING_SIZE) { | 
|  | printk(KERN_INFO "Try to recover rx ring exhausted...\n"); | 
|  | /* Re-allocate skbuffs to fill the descriptor ring */ | 
|  | for (; np->cur_rx - np->old_rx > 0; np->old_rx++) { | 
|  | struct sk_buff *skb; | 
|  | entry = np->old_rx % RX_RING_SIZE; | 
|  | /* Dropped packets don't need to re-allocate */ | 
|  | if (np->rx_skbuff[entry] == NULL) { | 
|  | skb = netdev_alloc_skb_ip_align(dev, | 
|  | np->rx_buf_sz); | 
|  | if (skb == NULL) { | 
|  | np->rx_ring[entry].fraginfo = 0; | 
|  | printk (KERN_INFO | 
|  | "%s: Still unable to re-allocate Rx skbuff.#%d\n", | 
|  | dev->name, entry); | 
|  | break; | 
|  | } | 
|  | np->rx_skbuff[entry] = skb; | 
|  | np->rx_ring[entry].fraginfo = | 
|  | cpu_to_le64 (pci_map_single | 
|  | (np->pdev, skb->data, np->rx_buf_sz, | 
|  | PCI_DMA_FROMDEVICE)); | 
|  | } | 
|  | np->rx_ring[entry].fraginfo |= | 
|  | cpu_to_le64((u64)np->rx_buf_sz << 48); | 
|  | np->rx_ring[entry].status = 0; | 
|  | } /* end for */ | 
|  | } /* end if */ | 
|  | spin_unlock_irqrestore (&np->rx_lock, flags); | 
|  | np->timer.expires = jiffies + next_tick; | 
|  | add_timer(&np->timer); | 
|  | } | 
|  |  | 
|  | static void | 
|  | rio_tx_timeout (struct net_device *dev) | 
|  | { | 
|  | long ioaddr = dev->base_addr; | 
|  |  | 
|  | printk (KERN_INFO "%s: Tx timed out (%4.4x), is buffer full?\n", | 
|  | dev->name, readl (ioaddr + TxStatus)); | 
|  | rio_free_tx(dev, 0); | 
|  | dev->if_port = 0; | 
|  | dev->trans_start = jiffies; /* prevent tx timeout */ | 
|  | } | 
|  |  | 
|  | /* allocate and initialize Tx and Rx descriptors */ | 
|  | static void | 
|  | alloc_list (struct net_device *dev) | 
|  | { | 
|  | struct netdev_private *np = netdev_priv(dev); | 
|  | int i; | 
|  |  | 
|  | np->cur_rx = np->cur_tx = 0; | 
|  | np->old_rx = np->old_tx = 0; | 
|  | np->rx_buf_sz = (dev->mtu <= 1500 ? PACKET_SIZE : dev->mtu + 32); | 
|  |  | 
|  | /* Initialize Tx descriptors, TFDListPtr leaves in start_xmit(). */ | 
|  | for (i = 0; i < TX_RING_SIZE; i++) { | 
|  | np->tx_skbuff[i] = NULL; | 
|  | np->tx_ring[i].status = cpu_to_le64 (TFDDone); | 
|  | np->tx_ring[i].next_desc = cpu_to_le64 (np->tx_ring_dma + | 
|  | ((i+1)%TX_RING_SIZE) * | 
|  | sizeof (struct netdev_desc)); | 
|  | } | 
|  |  | 
|  | /* Initialize Rx descriptors */ | 
|  | for (i = 0; i < RX_RING_SIZE; i++) { | 
|  | np->rx_ring[i].next_desc = cpu_to_le64 (np->rx_ring_dma + | 
|  | ((i + 1) % RX_RING_SIZE) * | 
|  | sizeof (struct netdev_desc)); | 
|  | np->rx_ring[i].status = 0; | 
|  | np->rx_ring[i].fraginfo = 0; | 
|  | np->rx_skbuff[i] = NULL; | 
|  | } | 
|  |  | 
|  | /* Allocate the rx buffers */ | 
|  | for (i = 0; i < RX_RING_SIZE; i++) { | 
|  | /* Allocated fixed size of skbuff */ | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | skb = netdev_alloc_skb_ip_align(dev, np->rx_buf_sz); | 
|  | np->rx_skbuff[i] = skb; | 
|  | if (skb == NULL) { | 
|  | printk (KERN_ERR | 
|  | "%s: alloc_list: allocate Rx buffer error! ", | 
|  | dev->name); | 
|  | break; | 
|  | } | 
|  | /* Rubicon now supports 40 bits of addressing space. */ | 
|  | np->rx_ring[i].fraginfo = | 
|  | cpu_to_le64 ( pci_map_single ( | 
|  | np->pdev, skb->data, np->rx_buf_sz, | 
|  | PCI_DMA_FROMDEVICE)); | 
|  | np->rx_ring[i].fraginfo |= cpu_to_le64((u64)np->rx_buf_sz << 48); | 
|  | } | 
|  |  | 
|  | /* Set RFDListPtr */ | 
|  | writel (np->rx_ring_dma, dev->base_addr + RFDListPtr0); | 
|  | writel (0, dev->base_addr + RFDListPtr1); | 
|  | } | 
|  |  | 
|  | static netdev_tx_t | 
|  | start_xmit (struct sk_buff *skb, struct net_device *dev) | 
|  | { | 
|  | struct netdev_private *np = netdev_priv(dev); | 
|  | struct netdev_desc *txdesc; | 
|  | unsigned entry; | 
|  | u32 ioaddr; | 
|  | u64 tfc_vlan_tag = 0; | 
|  |  | 
|  | if (np->link_status == 0) {	/* Link Down */ | 
|  | dev_kfree_skb(skb); | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  | ioaddr = dev->base_addr; | 
|  | entry = np->cur_tx % TX_RING_SIZE; | 
|  | np->tx_skbuff[entry] = skb; | 
|  | txdesc = &np->tx_ring[entry]; | 
|  |  | 
|  | #if 0 | 
|  | if (skb->ip_summed == CHECKSUM_PARTIAL) { | 
|  | txdesc->status |= | 
|  | cpu_to_le64 (TCPChecksumEnable | UDPChecksumEnable | | 
|  | IPChecksumEnable); | 
|  | } | 
|  | #endif | 
|  | if (np->vlan) { | 
|  | tfc_vlan_tag = VLANTagInsert | | 
|  | ((u64)np->vlan << 32) | | 
|  | ((u64)skb->priority << 45); | 
|  | } | 
|  | txdesc->fraginfo = cpu_to_le64 (pci_map_single (np->pdev, skb->data, | 
|  | skb->len, | 
|  | PCI_DMA_TODEVICE)); | 
|  | txdesc->fraginfo |= cpu_to_le64((u64)skb->len << 48); | 
|  |  | 
|  | /* DL2K bug: DMA fails to get next descriptor ptr in 10Mbps mode | 
|  | * Work around: Always use 1 descriptor in 10Mbps mode */ | 
|  | if (entry % np->tx_coalesce == 0 || np->speed == 10) | 
|  | txdesc->status = cpu_to_le64 (entry | tfc_vlan_tag | | 
|  | WordAlignDisable | | 
|  | TxDMAIndicate | | 
|  | (1 << FragCountShift)); | 
|  | else | 
|  | txdesc->status = cpu_to_le64 (entry | tfc_vlan_tag | | 
|  | WordAlignDisable | | 
|  | (1 << FragCountShift)); | 
|  |  | 
|  | /* TxDMAPollNow */ | 
|  | writel (readl (ioaddr + DMACtrl) | 0x00001000, ioaddr + DMACtrl); | 
|  | /* Schedule ISR */ | 
|  | writel(10000, ioaddr + CountDown); | 
|  | np->cur_tx = (np->cur_tx + 1) % TX_RING_SIZE; | 
|  | if ((np->cur_tx - np->old_tx + TX_RING_SIZE) % TX_RING_SIZE | 
|  | < TX_QUEUE_LEN - 1 && np->speed != 10) { | 
|  | /* do nothing */ | 
|  | } else if (!netif_queue_stopped(dev)) { | 
|  | netif_stop_queue (dev); | 
|  | } | 
|  |  | 
|  | /* The first TFDListPtr */ | 
|  | if (readl (dev->base_addr + TFDListPtr0) == 0) { | 
|  | writel (np->tx_ring_dma + entry * sizeof (struct netdev_desc), | 
|  | dev->base_addr + TFDListPtr0); | 
|  | writel (0, dev->base_addr + TFDListPtr1); | 
|  | } | 
|  |  | 
|  | return NETDEV_TX_OK; | 
|  | } | 
|  |  | 
|  | static irqreturn_t | 
|  | rio_interrupt (int irq, void *dev_instance) | 
|  | { | 
|  | struct net_device *dev = dev_instance; | 
|  | struct netdev_private *np; | 
|  | unsigned int_status; | 
|  | long ioaddr; | 
|  | int cnt = max_intrloop; | 
|  | int handled = 0; | 
|  |  | 
|  | ioaddr = dev->base_addr; | 
|  | np = netdev_priv(dev); | 
|  | while (1) { | 
|  | int_status = readw (ioaddr + IntStatus); | 
|  | writew (int_status, ioaddr + IntStatus); | 
|  | int_status &= DEFAULT_INTR; | 
|  | if (int_status == 0 || --cnt < 0) | 
|  | break; | 
|  | handled = 1; | 
|  | /* Processing received packets */ | 
|  | if (int_status & RxDMAComplete) | 
|  | receive_packet (dev); | 
|  | /* TxDMAComplete interrupt */ | 
|  | if ((int_status & (TxDMAComplete|IntRequested))) { | 
|  | int tx_status; | 
|  | tx_status = readl (ioaddr + TxStatus); | 
|  | if (tx_status & 0x01) | 
|  | tx_error (dev, tx_status); | 
|  | /* Free used tx skbuffs */ | 
|  | rio_free_tx (dev, 1); | 
|  | } | 
|  |  | 
|  | /* Handle uncommon events */ | 
|  | if (int_status & | 
|  | (HostError | LinkEvent | UpdateStats)) | 
|  | rio_error (dev, int_status); | 
|  | } | 
|  | if (np->cur_tx != np->old_tx) | 
|  | writel (100, ioaddr + CountDown); | 
|  | return IRQ_RETVAL(handled); | 
|  | } | 
|  |  | 
|  | static inline dma_addr_t desc_to_dma(struct netdev_desc *desc) | 
|  | { | 
|  | return le64_to_cpu(desc->fraginfo) & DMA_BIT_MASK(48); | 
|  | } | 
|  |  | 
|  | static void | 
|  | rio_free_tx (struct net_device *dev, int irq) | 
|  | { | 
|  | struct netdev_private *np = netdev_priv(dev); | 
|  | int entry = np->old_tx % TX_RING_SIZE; | 
|  | int tx_use = 0; | 
|  | unsigned long flag = 0; | 
|  |  | 
|  | if (irq) | 
|  | spin_lock(&np->tx_lock); | 
|  | else | 
|  | spin_lock_irqsave(&np->tx_lock, flag); | 
|  |  | 
|  | /* Free used tx skbuffs */ | 
|  | while (entry != np->cur_tx) { | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | if (!(np->tx_ring[entry].status & cpu_to_le64(TFDDone))) | 
|  | break; | 
|  | skb = np->tx_skbuff[entry]; | 
|  | pci_unmap_single (np->pdev, | 
|  | desc_to_dma(&np->tx_ring[entry]), | 
|  | skb->len, PCI_DMA_TODEVICE); | 
|  | if (irq) | 
|  | dev_kfree_skb_irq (skb); | 
|  | else | 
|  | dev_kfree_skb (skb); | 
|  |  | 
|  | np->tx_skbuff[entry] = NULL; | 
|  | entry = (entry + 1) % TX_RING_SIZE; | 
|  | tx_use++; | 
|  | } | 
|  | if (irq) | 
|  | spin_unlock(&np->tx_lock); | 
|  | else | 
|  | spin_unlock_irqrestore(&np->tx_lock, flag); | 
|  | np->old_tx = entry; | 
|  |  | 
|  | /* If the ring is no longer full, clear tx_full and | 
|  | call netif_wake_queue() */ | 
|  |  | 
|  | if (netif_queue_stopped(dev) && | 
|  | ((np->cur_tx - np->old_tx + TX_RING_SIZE) % TX_RING_SIZE | 
|  | < TX_QUEUE_LEN - 1 || np->speed == 10)) { | 
|  | netif_wake_queue (dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | tx_error (struct net_device *dev, int tx_status) | 
|  | { | 
|  | struct netdev_private *np; | 
|  | long ioaddr = dev->base_addr; | 
|  | int frame_id; | 
|  | int i; | 
|  |  | 
|  | np = netdev_priv(dev); | 
|  |  | 
|  | frame_id = (tx_status & 0xffff0000); | 
|  | printk (KERN_ERR "%s: Transmit error, TxStatus %4.4x, FrameId %d.\n", | 
|  | dev->name, tx_status, frame_id); | 
|  | np->stats.tx_errors++; | 
|  | /* Ttransmit Underrun */ | 
|  | if (tx_status & 0x10) { | 
|  | np->stats.tx_fifo_errors++; | 
|  | writew (readw (ioaddr + TxStartThresh) + 0x10, | 
|  | ioaddr + TxStartThresh); | 
|  | /* Transmit Underrun need to set TxReset, DMARest, FIFOReset */ | 
|  | writew (TxReset | DMAReset | FIFOReset | NetworkReset, | 
|  | ioaddr + ASICCtrl + 2); | 
|  | /* Wait for ResetBusy bit clear */ | 
|  | for (i = 50; i > 0; i--) { | 
|  | if ((readw (ioaddr + ASICCtrl + 2) & ResetBusy) == 0) | 
|  | break; | 
|  | mdelay (1); | 
|  | } | 
|  | rio_free_tx (dev, 1); | 
|  | /* Reset TFDListPtr */ | 
|  | writel (np->tx_ring_dma + | 
|  | np->old_tx * sizeof (struct netdev_desc), | 
|  | dev->base_addr + TFDListPtr0); | 
|  | writel (0, dev->base_addr + TFDListPtr1); | 
|  |  | 
|  | /* Let TxStartThresh stay default value */ | 
|  | } | 
|  | /* Late Collision */ | 
|  | if (tx_status & 0x04) { | 
|  | np->stats.tx_fifo_errors++; | 
|  | /* TxReset and clear FIFO */ | 
|  | writew (TxReset | FIFOReset, ioaddr + ASICCtrl + 2); | 
|  | /* Wait reset done */ | 
|  | for (i = 50; i > 0; i--) { | 
|  | if ((readw (ioaddr + ASICCtrl + 2) & ResetBusy) == 0) | 
|  | break; | 
|  | mdelay (1); | 
|  | } | 
|  | /* Let TxStartThresh stay default value */ | 
|  | } | 
|  | /* Maximum Collisions */ | 
|  | #ifdef ETHER_STATS | 
|  | if (tx_status & 0x08) | 
|  | np->stats.collisions16++; | 
|  | #else | 
|  | if (tx_status & 0x08) | 
|  | np->stats.collisions++; | 
|  | #endif | 
|  | /* Restart the Tx */ | 
|  | writel (readw (dev->base_addr + MACCtrl) | TxEnable, ioaddr + MACCtrl); | 
|  | } | 
|  |  | 
|  | static int | 
|  | receive_packet (struct net_device *dev) | 
|  | { | 
|  | struct netdev_private *np = netdev_priv(dev); | 
|  | int entry = np->cur_rx % RX_RING_SIZE; | 
|  | int cnt = 30; | 
|  |  | 
|  | /* If RFDDone, FrameStart and FrameEnd set, there is a new packet in. */ | 
|  | while (1) { | 
|  | struct netdev_desc *desc = &np->rx_ring[entry]; | 
|  | int pkt_len; | 
|  | u64 frame_status; | 
|  |  | 
|  | if (!(desc->status & cpu_to_le64(RFDDone)) || | 
|  | !(desc->status & cpu_to_le64(FrameStart)) || | 
|  | !(desc->status & cpu_to_le64(FrameEnd))) | 
|  | break; | 
|  |  | 
|  | /* Chip omits the CRC. */ | 
|  | frame_status = le64_to_cpu(desc->status); | 
|  | pkt_len = frame_status & 0xffff; | 
|  | if (--cnt < 0) | 
|  | break; | 
|  | /* Update rx error statistics, drop packet. */ | 
|  | if (frame_status & RFS_Errors) { | 
|  | np->stats.rx_errors++; | 
|  | if (frame_status & (RxRuntFrame | RxLengthError)) | 
|  | np->stats.rx_length_errors++; | 
|  | if (frame_status & RxFCSError) | 
|  | np->stats.rx_crc_errors++; | 
|  | if (frame_status & RxAlignmentError && np->speed != 1000) | 
|  | np->stats.rx_frame_errors++; | 
|  | if (frame_status & RxFIFOOverrun) | 
|  | np->stats.rx_fifo_errors++; | 
|  | } else { | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | /* Small skbuffs for short packets */ | 
|  | if (pkt_len > copy_thresh) { | 
|  | pci_unmap_single (np->pdev, | 
|  | desc_to_dma(desc), | 
|  | np->rx_buf_sz, | 
|  | PCI_DMA_FROMDEVICE); | 
|  | skb_put (skb = np->rx_skbuff[entry], pkt_len); | 
|  | np->rx_skbuff[entry] = NULL; | 
|  | } else if ((skb = netdev_alloc_skb_ip_align(dev, pkt_len))) { | 
|  | pci_dma_sync_single_for_cpu(np->pdev, | 
|  | desc_to_dma(desc), | 
|  | np->rx_buf_sz, | 
|  | PCI_DMA_FROMDEVICE); | 
|  | skb_copy_to_linear_data (skb, | 
|  | np->rx_skbuff[entry]->data, | 
|  | pkt_len); | 
|  | skb_put (skb, pkt_len); | 
|  | pci_dma_sync_single_for_device(np->pdev, | 
|  | desc_to_dma(desc), | 
|  | np->rx_buf_sz, | 
|  | PCI_DMA_FROMDEVICE); | 
|  | } | 
|  | skb->protocol = eth_type_trans (skb, dev); | 
|  | #if 0 | 
|  | /* Checksum done by hw, but csum value unavailable. */ | 
|  | if (np->pdev->pci_rev_id >= 0x0c && | 
|  | !(frame_status & (TCPError | UDPError | IPError))) { | 
|  | skb->ip_summed = CHECKSUM_UNNECESSARY; | 
|  | } | 
|  | #endif | 
|  | netif_rx (skb); | 
|  | } | 
|  | entry = (entry + 1) % RX_RING_SIZE; | 
|  | } | 
|  | spin_lock(&np->rx_lock); | 
|  | np->cur_rx = entry; | 
|  | /* Re-allocate skbuffs to fill the descriptor ring */ | 
|  | entry = np->old_rx; | 
|  | while (entry != np->cur_rx) { | 
|  | struct sk_buff *skb; | 
|  | /* Dropped packets don't need to re-allocate */ | 
|  | if (np->rx_skbuff[entry] == NULL) { | 
|  | skb = netdev_alloc_skb_ip_align(dev, np->rx_buf_sz); | 
|  | if (skb == NULL) { | 
|  | np->rx_ring[entry].fraginfo = 0; | 
|  | printk (KERN_INFO | 
|  | "%s: receive_packet: " | 
|  | "Unable to re-allocate Rx skbuff.#%d\n", | 
|  | dev->name, entry); | 
|  | break; | 
|  | } | 
|  | np->rx_skbuff[entry] = skb; | 
|  | np->rx_ring[entry].fraginfo = | 
|  | cpu_to_le64 (pci_map_single | 
|  | (np->pdev, skb->data, np->rx_buf_sz, | 
|  | PCI_DMA_FROMDEVICE)); | 
|  | } | 
|  | np->rx_ring[entry].fraginfo |= | 
|  | cpu_to_le64((u64)np->rx_buf_sz << 48); | 
|  | np->rx_ring[entry].status = 0; | 
|  | entry = (entry + 1) % RX_RING_SIZE; | 
|  | } | 
|  | np->old_rx = entry; | 
|  | spin_unlock(&np->rx_lock); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void | 
|  | rio_error (struct net_device *dev, int int_status) | 
|  | { | 
|  | long ioaddr = dev->base_addr; | 
|  | struct netdev_private *np = netdev_priv(dev); | 
|  | u16 macctrl; | 
|  |  | 
|  | /* Link change event */ | 
|  | if (int_status & LinkEvent) { | 
|  | if (mii_wait_link (dev, 10) == 0) { | 
|  | printk (KERN_INFO "%s: Link up\n", dev->name); | 
|  | if (np->phy_media) | 
|  | mii_get_media_pcs (dev); | 
|  | else | 
|  | mii_get_media (dev); | 
|  | if (np->speed == 1000) | 
|  | np->tx_coalesce = tx_coalesce; | 
|  | else | 
|  | np->tx_coalesce = 1; | 
|  | macctrl = 0; | 
|  | macctrl |= (np->vlan) ? AutoVLANuntagging : 0; | 
|  | macctrl |= (np->full_duplex) ? DuplexSelect : 0; | 
|  | macctrl |= (np->tx_flow) ? | 
|  | TxFlowControlEnable : 0; | 
|  | macctrl |= (np->rx_flow) ? | 
|  | RxFlowControlEnable : 0; | 
|  | writew(macctrl,	ioaddr + MACCtrl); | 
|  | np->link_status = 1; | 
|  | netif_carrier_on(dev); | 
|  | } else { | 
|  | printk (KERN_INFO "%s: Link off\n", dev->name); | 
|  | np->link_status = 0; | 
|  | netif_carrier_off(dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* UpdateStats statistics registers */ | 
|  | if (int_status & UpdateStats) { | 
|  | get_stats (dev); | 
|  | } | 
|  |  | 
|  | /* PCI Error, a catastronphic error related to the bus interface | 
|  | occurs, set GlobalReset and HostReset to reset. */ | 
|  | if (int_status & HostError) { | 
|  | printk (KERN_ERR "%s: HostError! IntStatus %4.4x.\n", | 
|  | dev->name, int_status); | 
|  | writew (GlobalReset | HostReset, ioaddr + ASICCtrl + 2); | 
|  | mdelay (500); | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct net_device_stats * | 
|  | get_stats (struct net_device *dev) | 
|  | { | 
|  | long ioaddr = dev->base_addr; | 
|  | struct netdev_private *np = netdev_priv(dev); | 
|  | #ifdef MEM_MAPPING | 
|  | int i; | 
|  | #endif | 
|  | unsigned int stat_reg; | 
|  |  | 
|  | /* All statistics registers need to be acknowledged, | 
|  | else statistic overflow could cause problems */ | 
|  |  | 
|  | np->stats.rx_packets += readl (ioaddr + FramesRcvOk); | 
|  | np->stats.tx_packets += readl (ioaddr + FramesXmtOk); | 
|  | np->stats.rx_bytes += readl (ioaddr + OctetRcvOk); | 
|  | np->stats.tx_bytes += readl (ioaddr + OctetXmtOk); | 
|  |  | 
|  | np->stats.multicast = readl (ioaddr + McstFramesRcvdOk); | 
|  | np->stats.collisions += readl (ioaddr + SingleColFrames) | 
|  | +  readl (ioaddr + MultiColFrames); | 
|  |  | 
|  | /* detailed tx errors */ | 
|  | stat_reg = readw (ioaddr + FramesAbortXSColls); | 
|  | np->stats.tx_aborted_errors += stat_reg; | 
|  | np->stats.tx_errors += stat_reg; | 
|  |  | 
|  | stat_reg = readw (ioaddr + CarrierSenseErrors); | 
|  | np->stats.tx_carrier_errors += stat_reg; | 
|  | np->stats.tx_errors += stat_reg; | 
|  |  | 
|  | /* Clear all other statistic register. */ | 
|  | readl (ioaddr + McstOctetXmtOk); | 
|  | readw (ioaddr + BcstFramesXmtdOk); | 
|  | readl (ioaddr + McstFramesXmtdOk); | 
|  | readw (ioaddr + BcstFramesRcvdOk); | 
|  | readw (ioaddr + MacControlFramesRcvd); | 
|  | readw (ioaddr + FrameTooLongErrors); | 
|  | readw (ioaddr + InRangeLengthErrors); | 
|  | readw (ioaddr + FramesCheckSeqErrors); | 
|  | readw (ioaddr + FramesLostRxErrors); | 
|  | readl (ioaddr + McstOctetXmtOk); | 
|  | readl (ioaddr + BcstOctetXmtOk); | 
|  | readl (ioaddr + McstFramesXmtdOk); | 
|  | readl (ioaddr + FramesWDeferredXmt); | 
|  | readl (ioaddr + LateCollisions); | 
|  | readw (ioaddr + BcstFramesXmtdOk); | 
|  | readw (ioaddr + MacControlFramesXmtd); | 
|  | readw (ioaddr + FramesWEXDeferal); | 
|  |  | 
|  | #ifdef MEM_MAPPING | 
|  | for (i = 0x100; i <= 0x150; i += 4) | 
|  | readl (ioaddr + i); | 
|  | #endif | 
|  | readw (ioaddr + TxJumboFrames); | 
|  | readw (ioaddr + RxJumboFrames); | 
|  | readw (ioaddr + TCPCheckSumErrors); | 
|  | readw (ioaddr + UDPCheckSumErrors); | 
|  | readw (ioaddr + IPCheckSumErrors); | 
|  | return &np->stats; | 
|  | } | 
|  |  | 
|  | static int | 
|  | clear_stats (struct net_device *dev) | 
|  | { | 
|  | long ioaddr = dev->base_addr; | 
|  | #ifdef MEM_MAPPING | 
|  | int i; | 
|  | #endif | 
|  |  | 
|  | /* All statistics registers need to be acknowledged, | 
|  | else statistic overflow could cause problems */ | 
|  | readl (ioaddr + FramesRcvOk); | 
|  | readl (ioaddr + FramesXmtOk); | 
|  | readl (ioaddr + OctetRcvOk); | 
|  | readl (ioaddr + OctetXmtOk); | 
|  |  | 
|  | readl (ioaddr + McstFramesRcvdOk); | 
|  | readl (ioaddr + SingleColFrames); | 
|  | readl (ioaddr + MultiColFrames); | 
|  | readl (ioaddr + LateCollisions); | 
|  | /* detailed rx errors */ | 
|  | readw (ioaddr + FrameTooLongErrors); | 
|  | readw (ioaddr + InRangeLengthErrors); | 
|  | readw (ioaddr + FramesCheckSeqErrors); | 
|  | readw (ioaddr + FramesLostRxErrors); | 
|  |  | 
|  | /* detailed tx errors */ | 
|  | readw (ioaddr + FramesAbortXSColls); | 
|  | readw (ioaddr + CarrierSenseErrors); | 
|  |  | 
|  | /* Clear all other statistic register. */ | 
|  | readl (ioaddr + McstOctetXmtOk); | 
|  | readw (ioaddr + BcstFramesXmtdOk); | 
|  | readl (ioaddr + McstFramesXmtdOk); | 
|  | readw (ioaddr + BcstFramesRcvdOk); | 
|  | readw (ioaddr + MacControlFramesRcvd); | 
|  | readl (ioaddr + McstOctetXmtOk); | 
|  | readl (ioaddr + BcstOctetXmtOk); | 
|  | readl (ioaddr + McstFramesXmtdOk); | 
|  | readl (ioaddr + FramesWDeferredXmt); | 
|  | readw (ioaddr + BcstFramesXmtdOk); | 
|  | readw (ioaddr + MacControlFramesXmtd); | 
|  | readw (ioaddr + FramesWEXDeferal); | 
|  | #ifdef MEM_MAPPING | 
|  | for (i = 0x100; i <= 0x150; i += 4) | 
|  | readl (ioaddr + i); | 
|  | #endif | 
|  | readw (ioaddr + TxJumboFrames); | 
|  | readw (ioaddr + RxJumboFrames); | 
|  | readw (ioaddr + TCPCheckSumErrors); | 
|  | readw (ioaddr + UDPCheckSumErrors); | 
|  | readw (ioaddr + IPCheckSumErrors); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | change_mtu (struct net_device *dev, int new_mtu) | 
|  | { | 
|  | struct netdev_private *np = netdev_priv(dev); | 
|  | int max = (np->jumbo) ? MAX_JUMBO : 1536; | 
|  |  | 
|  | if ((new_mtu < 68) || (new_mtu > max)) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | dev->mtu = new_mtu; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void | 
|  | set_multicast (struct net_device *dev) | 
|  | { | 
|  | long ioaddr = dev->base_addr; | 
|  | u32 hash_table[2]; | 
|  | u16 rx_mode = 0; | 
|  | struct netdev_private *np = netdev_priv(dev); | 
|  |  | 
|  | hash_table[0] = hash_table[1] = 0; | 
|  | /* RxFlowcontrol DA: 01-80-C2-00-00-01. Hash index=0x39 */ | 
|  | hash_table[1] |= 0x02000000; | 
|  | if (dev->flags & IFF_PROMISC) { | 
|  | /* Receive all frames promiscuously. */ | 
|  | rx_mode = ReceiveAllFrames; | 
|  | } else if ((dev->flags & IFF_ALLMULTI) || | 
|  | (netdev_mc_count(dev) > multicast_filter_limit)) { | 
|  | /* Receive broadcast and multicast frames */ | 
|  | rx_mode = ReceiveBroadcast | ReceiveMulticast | ReceiveUnicast; | 
|  | } else if (!netdev_mc_empty(dev)) { | 
|  | struct netdev_hw_addr *ha; | 
|  | /* Receive broadcast frames and multicast frames filtering | 
|  | by Hashtable */ | 
|  | rx_mode = | 
|  | ReceiveBroadcast | ReceiveMulticastHash | ReceiveUnicast; | 
|  | netdev_for_each_mc_addr(ha, dev) { | 
|  | int bit, index = 0; | 
|  | int crc = ether_crc_le(ETH_ALEN, ha->addr); | 
|  | /* The inverted high significant 6 bits of CRC are | 
|  | used as an index to hashtable */ | 
|  | for (bit = 0; bit < 6; bit++) | 
|  | if (crc & (1 << (31 - bit))) | 
|  | index |= (1 << bit); | 
|  | hash_table[index / 32] |= (1 << (index % 32)); | 
|  | } | 
|  | } else { | 
|  | rx_mode = ReceiveBroadcast | ReceiveUnicast; | 
|  | } | 
|  | if (np->vlan) { | 
|  | /* ReceiveVLANMatch field in ReceiveMode */ | 
|  | rx_mode |= ReceiveVLANMatch; | 
|  | } | 
|  |  | 
|  | writel (hash_table[0], ioaddr + HashTable0); | 
|  | writel (hash_table[1], ioaddr + HashTable1); | 
|  | writew (rx_mode, ioaddr + ReceiveMode); | 
|  | } | 
|  |  | 
|  | static void rio_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) | 
|  | { | 
|  | struct netdev_private *np = netdev_priv(dev); | 
|  | strcpy(info->driver, "dl2k"); | 
|  | strcpy(info->version, DRV_VERSION); | 
|  | strcpy(info->bus_info, pci_name(np->pdev)); | 
|  | } | 
|  |  | 
|  | static int rio_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) | 
|  | { | 
|  | struct netdev_private *np = netdev_priv(dev); | 
|  | if (np->phy_media) { | 
|  | /* fiber device */ | 
|  | cmd->supported = SUPPORTED_Autoneg | SUPPORTED_FIBRE; | 
|  | cmd->advertising= ADVERTISED_Autoneg | ADVERTISED_FIBRE; | 
|  | cmd->port = PORT_FIBRE; | 
|  | cmd->transceiver = XCVR_INTERNAL; | 
|  | } else { | 
|  | /* copper device */ | 
|  | cmd->supported = SUPPORTED_10baseT_Half | | 
|  | SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half | 
|  | | SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full | | 
|  | SUPPORTED_Autoneg | SUPPORTED_MII; | 
|  | cmd->advertising = ADVERTISED_10baseT_Half | | 
|  | ADVERTISED_10baseT_Full | ADVERTISED_100baseT_Half | | 
|  | ADVERTISED_100baseT_Full | ADVERTISED_1000baseT_Full| | 
|  | ADVERTISED_Autoneg | ADVERTISED_MII; | 
|  | cmd->port = PORT_MII; | 
|  | cmd->transceiver = XCVR_INTERNAL; | 
|  | } | 
|  | if ( np->link_status ) { | 
|  | ethtool_cmd_speed_set(cmd, np->speed); | 
|  | cmd->duplex = np->full_duplex ? DUPLEX_FULL : DUPLEX_HALF; | 
|  | } else { | 
|  | ethtool_cmd_speed_set(cmd, -1); | 
|  | cmd->duplex = -1; | 
|  | } | 
|  | if ( np->an_enable) | 
|  | cmd->autoneg = AUTONEG_ENABLE; | 
|  | else | 
|  | cmd->autoneg = AUTONEG_DISABLE; | 
|  |  | 
|  | cmd->phy_address = np->phy_addr; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int rio_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) | 
|  | { | 
|  | struct netdev_private *np = netdev_priv(dev); | 
|  | netif_carrier_off(dev); | 
|  | if (cmd->autoneg == AUTONEG_ENABLE) { | 
|  | if (np->an_enable) | 
|  | return 0; | 
|  | else { | 
|  | np->an_enable = 1; | 
|  | mii_set_media(dev); | 
|  | return 0; | 
|  | } | 
|  | } else { | 
|  | np->an_enable = 0; | 
|  | if (np->speed == 1000) { | 
|  | ethtool_cmd_speed_set(cmd, SPEED_100); | 
|  | cmd->duplex = DUPLEX_FULL; | 
|  | printk("Warning!! Can't disable Auto negotiation in 1000Mbps, change to Manual 100Mbps, Full duplex.\n"); | 
|  | } | 
|  | switch (ethtool_cmd_speed(cmd)) { | 
|  | case SPEED_10: | 
|  | np->speed = 10; | 
|  | np->full_duplex = (cmd->duplex == DUPLEX_FULL); | 
|  | break; | 
|  | case SPEED_100: | 
|  | np->speed = 100; | 
|  | np->full_duplex = (cmd->duplex == DUPLEX_FULL); | 
|  | break; | 
|  | case SPEED_1000: /* not supported */ | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | mii_set_media(dev); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u32 rio_get_link(struct net_device *dev) | 
|  | { | 
|  | struct netdev_private *np = netdev_priv(dev); | 
|  | return np->link_status; | 
|  | } | 
|  |  | 
|  | static const struct ethtool_ops ethtool_ops = { | 
|  | .get_drvinfo = rio_get_drvinfo, | 
|  | .get_settings = rio_get_settings, | 
|  | .set_settings = rio_set_settings, | 
|  | .get_link = rio_get_link, | 
|  | }; | 
|  |  | 
|  | static int | 
|  | rio_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) | 
|  | { | 
|  | int phy_addr; | 
|  | struct netdev_private *np = netdev_priv(dev); | 
|  | struct mii_ioctl_data *miidata = if_mii(rq); | 
|  |  | 
|  | phy_addr = np->phy_addr; | 
|  | switch (cmd) { | 
|  | case SIOCGMIIPHY: | 
|  | miidata->phy_id = phy_addr; | 
|  | break; | 
|  | case SIOCGMIIREG: | 
|  | miidata->val_out = mii_read (dev, phy_addr, miidata->reg_num); | 
|  | break; | 
|  | case SIOCSMIIREG: | 
|  | if (!capable(CAP_NET_ADMIN)) | 
|  | return -EPERM; | 
|  | mii_write (dev, phy_addr, miidata->reg_num, miidata->val_in); | 
|  | break; | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #define EEP_READ 0x0200 | 
|  | #define EEP_BUSY 0x8000 | 
|  | /* Read the EEPROM word */ | 
|  | /* We use I/O instruction to read/write eeprom to avoid fail on some machines */ | 
|  | static int | 
|  | read_eeprom (long ioaddr, int eep_addr) | 
|  | { | 
|  | int i = 1000; | 
|  | outw (EEP_READ | (eep_addr & 0xff), ioaddr + EepromCtrl); | 
|  | while (i-- > 0) { | 
|  | if (!(inw (ioaddr + EepromCtrl) & EEP_BUSY)) { | 
|  | return inw (ioaddr + EepromData); | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | enum phy_ctrl_bits { | 
|  | MII_READ = 0x00, MII_CLK = 0x01, MII_DATA1 = 0x02, MII_WRITE = 0x04, | 
|  | MII_DUPLEX = 0x08, | 
|  | }; | 
|  |  | 
|  | #define mii_delay() readb(ioaddr) | 
|  | static void | 
|  | mii_sendbit (struct net_device *dev, u32 data) | 
|  | { | 
|  | long ioaddr = dev->base_addr + PhyCtrl; | 
|  | data = (data) ? MII_DATA1 : 0; | 
|  | data |= MII_WRITE; | 
|  | data |= (readb (ioaddr) & 0xf8) | MII_WRITE; | 
|  | writeb (data, ioaddr); | 
|  | mii_delay (); | 
|  | writeb (data | MII_CLK, ioaddr); | 
|  | mii_delay (); | 
|  | } | 
|  |  | 
|  | static int | 
|  | mii_getbit (struct net_device *dev) | 
|  | { | 
|  | long ioaddr = dev->base_addr + PhyCtrl; | 
|  | u8 data; | 
|  |  | 
|  | data = (readb (ioaddr) & 0xf8) | MII_READ; | 
|  | writeb (data, ioaddr); | 
|  | mii_delay (); | 
|  | writeb (data | MII_CLK, ioaddr); | 
|  | mii_delay (); | 
|  | return ((readb (ioaddr) >> 1) & 1); | 
|  | } | 
|  |  | 
|  | static void | 
|  | mii_send_bits (struct net_device *dev, u32 data, int len) | 
|  | { | 
|  | int i; | 
|  | for (i = len - 1; i >= 0; i--) { | 
|  | mii_sendbit (dev, data & (1 << i)); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int | 
|  | mii_read (struct net_device *dev, int phy_addr, int reg_num) | 
|  | { | 
|  | u32 cmd; | 
|  | int i; | 
|  | u32 retval = 0; | 
|  |  | 
|  | /* Preamble */ | 
|  | mii_send_bits (dev, 0xffffffff, 32); | 
|  | /* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */ | 
|  | /* ST,OP = 0110'b for read operation */ | 
|  | cmd = (0x06 << 10 | phy_addr << 5 | reg_num); | 
|  | mii_send_bits (dev, cmd, 14); | 
|  | /* Turnaround */ | 
|  | if (mii_getbit (dev)) | 
|  | goto err_out; | 
|  | /* Read data */ | 
|  | for (i = 0; i < 16; i++) { | 
|  | retval |= mii_getbit (dev); | 
|  | retval <<= 1; | 
|  | } | 
|  | /* End cycle */ | 
|  | mii_getbit (dev); | 
|  | return (retval >> 1) & 0xffff; | 
|  |  | 
|  | err_out: | 
|  | return 0; | 
|  | } | 
|  | static int | 
|  | mii_write (struct net_device *dev, int phy_addr, int reg_num, u16 data) | 
|  | { | 
|  | u32 cmd; | 
|  |  | 
|  | /* Preamble */ | 
|  | mii_send_bits (dev, 0xffffffff, 32); | 
|  | /* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */ | 
|  | /* ST,OP,AAAAA,RRRRR,TA = 0101xxxxxxxxxx10'b = 0x5002 for write */ | 
|  | cmd = (0x5002 << 16) | (phy_addr << 23) | (reg_num << 18) | data; | 
|  | mii_send_bits (dev, cmd, 32); | 
|  | /* End cycle */ | 
|  | mii_getbit (dev); | 
|  | return 0; | 
|  | } | 
|  | static int | 
|  | mii_wait_link (struct net_device *dev, int wait) | 
|  | { | 
|  | __u16 bmsr; | 
|  | int phy_addr; | 
|  | struct netdev_private *np; | 
|  |  | 
|  | np = netdev_priv(dev); | 
|  | phy_addr = np->phy_addr; | 
|  |  | 
|  | do { | 
|  | bmsr = mii_read (dev, phy_addr, MII_BMSR); | 
|  | if (bmsr & BMSR_LSTATUS) | 
|  | return 0; | 
|  | mdelay (1); | 
|  | } while (--wait > 0); | 
|  | return -1; | 
|  | } | 
|  | static int | 
|  | mii_get_media (struct net_device *dev) | 
|  | { | 
|  | __u16 negotiate; | 
|  | __u16 bmsr; | 
|  | __u16 mscr; | 
|  | __u16 mssr; | 
|  | int phy_addr; | 
|  | struct netdev_private *np; | 
|  |  | 
|  | np = netdev_priv(dev); | 
|  | phy_addr = np->phy_addr; | 
|  |  | 
|  | bmsr = mii_read (dev, phy_addr, MII_BMSR); | 
|  | if (np->an_enable) { | 
|  | if (!(bmsr & BMSR_ANEGCOMPLETE)) { | 
|  | /* Auto-Negotiation not completed */ | 
|  | return -1; | 
|  | } | 
|  | negotiate = mii_read (dev, phy_addr, MII_ADVERTISE) & | 
|  | mii_read (dev, phy_addr, MII_LPA); | 
|  | mscr = mii_read (dev, phy_addr, MII_CTRL1000); | 
|  | mssr = mii_read (dev, phy_addr, MII_STAT1000); | 
|  | if (mscr & ADVERTISE_1000FULL && mssr & LPA_1000FULL) { | 
|  | np->speed = 1000; | 
|  | np->full_duplex = 1; | 
|  | printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n"); | 
|  | } else if (mscr & ADVERTISE_1000HALF && mssr & LPA_1000HALF) { | 
|  | np->speed = 1000; | 
|  | np->full_duplex = 0; | 
|  | printk (KERN_INFO "Auto 1000 Mbps, Half duplex\n"); | 
|  | } else if (negotiate & ADVERTISE_100FULL) { | 
|  | np->speed = 100; | 
|  | np->full_duplex = 1; | 
|  | printk (KERN_INFO "Auto 100 Mbps, Full duplex\n"); | 
|  | } else if (negotiate & ADVERTISE_100HALF) { | 
|  | np->speed = 100; | 
|  | np->full_duplex = 0; | 
|  | printk (KERN_INFO "Auto 100 Mbps, Half duplex\n"); | 
|  | } else if (negotiate & ADVERTISE_10FULL) { | 
|  | np->speed = 10; | 
|  | np->full_duplex = 1; | 
|  | printk (KERN_INFO "Auto 10 Mbps, Full duplex\n"); | 
|  | } else if (negotiate & ADVERTISE_10HALF) { | 
|  | np->speed = 10; | 
|  | np->full_duplex = 0; | 
|  | printk (KERN_INFO "Auto 10 Mbps, Half duplex\n"); | 
|  | } | 
|  | if (negotiate & ADVERTISE_PAUSE_CAP) { | 
|  | np->tx_flow &= 1; | 
|  | np->rx_flow &= 1; | 
|  | } else if (negotiate & ADVERTISE_PAUSE_ASYM) { | 
|  | np->tx_flow = 0; | 
|  | np->rx_flow &= 1; | 
|  | } | 
|  | /* else tx_flow, rx_flow = user select  */ | 
|  | } else { | 
|  | __u16 bmcr = mii_read (dev, phy_addr, MII_BMCR); | 
|  | switch (bmcr & (BMCR_SPEED100 | BMCR_SPEED1000)) { | 
|  | case BMCR_SPEED1000: | 
|  | printk (KERN_INFO "Operating at 1000 Mbps, "); | 
|  | break; | 
|  | case BMCR_SPEED100: | 
|  | printk (KERN_INFO "Operating at 100 Mbps, "); | 
|  | break; | 
|  | case 0: | 
|  | printk (KERN_INFO "Operating at 10 Mbps, "); | 
|  | } | 
|  | if (bmcr & BMCR_FULLDPLX) { | 
|  | printk (KERN_CONT "Full duplex\n"); | 
|  | } else { | 
|  | printk (KERN_CONT "Half duplex\n"); | 
|  | } | 
|  | } | 
|  | if (np->tx_flow) | 
|  | printk(KERN_INFO "Enable Tx Flow Control\n"); | 
|  | else | 
|  | printk(KERN_INFO "Disable Tx Flow Control\n"); | 
|  | if (np->rx_flow) | 
|  | printk(KERN_INFO "Enable Rx Flow Control\n"); | 
|  | else | 
|  | printk(KERN_INFO "Disable Rx Flow Control\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | mii_set_media (struct net_device *dev) | 
|  | { | 
|  | __u16 pscr; | 
|  | __u16 bmcr; | 
|  | __u16 bmsr; | 
|  | __u16 anar; | 
|  | int phy_addr; | 
|  | struct netdev_private *np; | 
|  | np = netdev_priv(dev); | 
|  | phy_addr = np->phy_addr; | 
|  |  | 
|  | /* Does user set speed? */ | 
|  | if (np->an_enable) { | 
|  | /* Advertise capabilities */ | 
|  | bmsr = mii_read (dev, phy_addr, MII_BMSR); | 
|  | anar = mii_read (dev, phy_addr, MII_ADVERTISE) & | 
|  | ~(ADVERTISE_100FULL | ADVERTISE_10FULL | | 
|  | ADVERTISE_100HALF | ADVERTISE_10HALF | | 
|  | ADVERTISE_100BASE4); | 
|  | if (bmsr & BMSR_100FULL) | 
|  | anar |= ADVERTISE_100FULL; | 
|  | if (bmsr & BMSR_100HALF) | 
|  | anar |= ADVERTISE_100HALF; | 
|  | if (bmsr & BMSR_100BASE4) | 
|  | anar |= ADVERTISE_100BASE4; | 
|  | if (bmsr & BMSR_10FULL) | 
|  | anar |= ADVERTISE_10FULL; | 
|  | if (bmsr & BMSR_10HALF) | 
|  | anar |= ADVERTISE_10HALF; | 
|  | anar |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; | 
|  | mii_write (dev, phy_addr, MII_ADVERTISE, anar); | 
|  |  | 
|  | /* Enable Auto crossover */ | 
|  | pscr = mii_read (dev, phy_addr, MII_PHY_SCR); | 
|  | pscr |= 3 << 5;	/* 11'b */ | 
|  | mii_write (dev, phy_addr, MII_PHY_SCR, pscr); | 
|  |  | 
|  | /* Soft reset PHY */ | 
|  | mii_write (dev, phy_addr, MII_BMCR, BMCR_RESET); | 
|  | bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET; | 
|  | mii_write (dev, phy_addr, MII_BMCR, bmcr); | 
|  | mdelay(1); | 
|  | } else { | 
|  | /* Force speed setting */ | 
|  | /* 1) Disable Auto crossover */ | 
|  | pscr = mii_read (dev, phy_addr, MII_PHY_SCR); | 
|  | pscr &= ~(3 << 5); | 
|  | mii_write (dev, phy_addr, MII_PHY_SCR, pscr); | 
|  |  | 
|  | /* 2) PHY Reset */ | 
|  | bmcr = mii_read (dev, phy_addr, MII_BMCR); | 
|  | bmcr |= BMCR_RESET; | 
|  | mii_write (dev, phy_addr, MII_BMCR, bmcr); | 
|  |  | 
|  | /* 3) Power Down */ | 
|  | bmcr = 0x1940;	/* must be 0x1940 */ | 
|  | mii_write (dev, phy_addr, MII_BMCR, bmcr); | 
|  | mdelay (100);	/* wait a certain time */ | 
|  |  | 
|  | /* 4) Advertise nothing */ | 
|  | mii_write (dev, phy_addr, MII_ADVERTISE, 0); | 
|  |  | 
|  | /* 5) Set media and Power Up */ | 
|  | bmcr = BMCR_PDOWN; | 
|  | if (np->speed == 100) { | 
|  | bmcr |= BMCR_SPEED100; | 
|  | printk (KERN_INFO "Manual 100 Mbps, "); | 
|  | } else if (np->speed == 10) { | 
|  | printk (KERN_INFO "Manual 10 Mbps, "); | 
|  | } | 
|  | if (np->full_duplex) { | 
|  | bmcr |= BMCR_FULLDPLX; | 
|  | printk (KERN_CONT "Full duplex\n"); | 
|  | } else { | 
|  | printk (KERN_CONT "Half duplex\n"); | 
|  | } | 
|  | #if 0 | 
|  | /* Set 1000BaseT Master/Slave setting */ | 
|  | mscr = mii_read (dev, phy_addr, MII_CTRL1000); | 
|  | mscr |= MII_MSCR_CFG_ENABLE; | 
|  | mscr &= ~MII_MSCR_CFG_VALUE = 0; | 
|  | #endif | 
|  | mii_write (dev, phy_addr, MII_BMCR, bmcr); | 
|  | mdelay(10); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | mii_get_media_pcs (struct net_device *dev) | 
|  | { | 
|  | __u16 negotiate; | 
|  | __u16 bmsr; | 
|  | int phy_addr; | 
|  | struct netdev_private *np; | 
|  |  | 
|  | np = netdev_priv(dev); | 
|  | phy_addr = np->phy_addr; | 
|  |  | 
|  | bmsr = mii_read (dev, phy_addr, PCS_BMSR); | 
|  | if (np->an_enable) { | 
|  | if (!(bmsr & BMSR_ANEGCOMPLETE)) { | 
|  | /* Auto-Negotiation not completed */ | 
|  | return -1; | 
|  | } | 
|  | negotiate = mii_read (dev, phy_addr, PCS_ANAR) & | 
|  | mii_read (dev, phy_addr, PCS_ANLPAR); | 
|  | np->speed = 1000; | 
|  | if (negotiate & PCS_ANAR_FULL_DUPLEX) { | 
|  | printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n"); | 
|  | np->full_duplex = 1; | 
|  | } else { | 
|  | printk (KERN_INFO "Auto 1000 Mbps, half duplex\n"); | 
|  | np->full_duplex = 0; | 
|  | } | 
|  | if (negotiate & PCS_ANAR_PAUSE) { | 
|  | np->tx_flow &= 1; | 
|  | np->rx_flow &= 1; | 
|  | } else if (negotiate & PCS_ANAR_ASYMMETRIC) { | 
|  | np->tx_flow = 0; | 
|  | np->rx_flow &= 1; | 
|  | } | 
|  | /* else tx_flow, rx_flow = user select  */ | 
|  | } else { | 
|  | __u16 bmcr = mii_read (dev, phy_addr, PCS_BMCR); | 
|  | printk (KERN_INFO "Operating at 1000 Mbps, "); | 
|  | if (bmcr & BMCR_FULLDPLX) { | 
|  | printk (KERN_CONT "Full duplex\n"); | 
|  | } else { | 
|  | printk (KERN_CONT "Half duplex\n"); | 
|  | } | 
|  | } | 
|  | if (np->tx_flow) | 
|  | printk(KERN_INFO "Enable Tx Flow Control\n"); | 
|  | else | 
|  | printk(KERN_INFO "Disable Tx Flow Control\n"); | 
|  | if (np->rx_flow) | 
|  | printk(KERN_INFO "Enable Rx Flow Control\n"); | 
|  | else | 
|  | printk(KERN_INFO "Disable Rx Flow Control\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int | 
|  | mii_set_media_pcs (struct net_device *dev) | 
|  | { | 
|  | __u16 bmcr; | 
|  | __u16 esr; | 
|  | __u16 anar; | 
|  | int phy_addr; | 
|  | struct netdev_private *np; | 
|  | np = netdev_priv(dev); | 
|  | phy_addr = np->phy_addr; | 
|  |  | 
|  | /* Auto-Negotiation? */ | 
|  | if (np->an_enable) { | 
|  | /* Advertise capabilities */ | 
|  | esr = mii_read (dev, phy_addr, PCS_ESR); | 
|  | anar = mii_read (dev, phy_addr, MII_ADVERTISE) & | 
|  | ~PCS_ANAR_HALF_DUPLEX & | 
|  | ~PCS_ANAR_FULL_DUPLEX; | 
|  | if (esr & (MII_ESR_1000BT_HD | MII_ESR_1000BX_HD)) | 
|  | anar |= PCS_ANAR_HALF_DUPLEX; | 
|  | if (esr & (MII_ESR_1000BT_FD | MII_ESR_1000BX_FD)) | 
|  | anar |= PCS_ANAR_FULL_DUPLEX; | 
|  | anar |= PCS_ANAR_PAUSE | PCS_ANAR_ASYMMETRIC; | 
|  | mii_write (dev, phy_addr, MII_ADVERTISE, anar); | 
|  |  | 
|  | /* Soft reset PHY */ | 
|  | mii_write (dev, phy_addr, MII_BMCR, BMCR_RESET); | 
|  | bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET; | 
|  | mii_write (dev, phy_addr, MII_BMCR, bmcr); | 
|  | mdelay(1); | 
|  | } else { | 
|  | /* Force speed setting */ | 
|  | /* PHY Reset */ | 
|  | bmcr = BMCR_RESET; | 
|  | mii_write (dev, phy_addr, MII_BMCR, bmcr); | 
|  | mdelay(10); | 
|  | if (np->full_duplex) { | 
|  | bmcr = BMCR_FULLDPLX; | 
|  | printk (KERN_INFO "Manual full duplex\n"); | 
|  | } else { | 
|  | bmcr = 0; | 
|  | printk (KERN_INFO "Manual half duplex\n"); | 
|  | } | 
|  | mii_write (dev, phy_addr, MII_BMCR, bmcr); | 
|  | mdelay(10); | 
|  |  | 
|  | /*  Advertise nothing */ | 
|  | mii_write (dev, phy_addr, MII_ADVERTISE, 0); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int | 
|  | rio_close (struct net_device *dev) | 
|  | { | 
|  | long ioaddr = dev->base_addr; | 
|  | struct netdev_private *np = netdev_priv(dev); | 
|  | struct sk_buff *skb; | 
|  | int i; | 
|  |  | 
|  | netif_stop_queue (dev); | 
|  |  | 
|  | /* Disable interrupts */ | 
|  | writew (0, ioaddr + IntEnable); | 
|  |  | 
|  | /* Stop Tx and Rx logics */ | 
|  | writel (TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl); | 
|  |  | 
|  | free_irq (dev->irq, dev); | 
|  | del_timer_sync (&np->timer); | 
|  |  | 
|  | /* Free all the skbuffs in the queue. */ | 
|  | for (i = 0; i < RX_RING_SIZE; i++) { | 
|  | skb = np->rx_skbuff[i]; | 
|  | if (skb) { | 
|  | pci_unmap_single(np->pdev, | 
|  | desc_to_dma(&np->rx_ring[i]), | 
|  | skb->len, PCI_DMA_FROMDEVICE); | 
|  | dev_kfree_skb (skb); | 
|  | np->rx_skbuff[i] = NULL; | 
|  | } | 
|  | np->rx_ring[i].status = 0; | 
|  | np->rx_ring[i].fraginfo = 0; | 
|  | } | 
|  | for (i = 0; i < TX_RING_SIZE; i++) { | 
|  | skb = np->tx_skbuff[i]; | 
|  | if (skb) { | 
|  | pci_unmap_single(np->pdev, | 
|  | desc_to_dma(&np->tx_ring[i]), | 
|  | skb->len, PCI_DMA_TODEVICE); | 
|  | dev_kfree_skb (skb); | 
|  | np->tx_skbuff[i] = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __devexit | 
|  | rio_remove1 (struct pci_dev *pdev) | 
|  | { | 
|  | struct net_device *dev = pci_get_drvdata (pdev); | 
|  |  | 
|  | if (dev) { | 
|  | struct netdev_private *np = netdev_priv(dev); | 
|  |  | 
|  | unregister_netdev (dev); | 
|  | pci_free_consistent (pdev, RX_TOTAL_SIZE, np->rx_ring, | 
|  | np->rx_ring_dma); | 
|  | pci_free_consistent (pdev, TX_TOTAL_SIZE, np->tx_ring, | 
|  | np->tx_ring_dma); | 
|  | #ifdef MEM_MAPPING | 
|  | iounmap ((char *) (dev->base_addr)); | 
|  | #endif | 
|  | free_netdev (dev); | 
|  | pci_release_regions (pdev); | 
|  | pci_disable_device (pdev); | 
|  | } | 
|  | pci_set_drvdata (pdev, NULL); | 
|  | } | 
|  |  | 
|  | static struct pci_driver rio_driver = { | 
|  | .name		= "dl2k", | 
|  | .id_table	= rio_pci_tbl, | 
|  | .probe		= rio_probe1, | 
|  | .remove		= __devexit_p(rio_remove1), | 
|  | }; | 
|  |  | 
|  | static int __init | 
|  | rio_init (void) | 
|  | { | 
|  | return pci_register_driver(&rio_driver); | 
|  | } | 
|  |  | 
|  | static void __exit | 
|  | rio_exit (void) | 
|  | { | 
|  | pci_unregister_driver (&rio_driver); | 
|  | } | 
|  |  | 
|  | module_init (rio_init); | 
|  | module_exit (rio_exit); | 
|  |  | 
|  | /* | 
|  |  | 
|  | Compile command: | 
|  |  | 
|  | gcc -D__KERNEL__ -DMODULE -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -c dl2k.c | 
|  |  | 
|  | Read Documentation/networking/dl2k.txt for details. | 
|  |  | 
|  | */ | 
|  |  |