[MIPS] Fix "no space between function name and open parenthesis" warnings.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/include/asm-mips/mach-pb1x00/pb1000.h b/include/asm-mips/mach-pb1x00/pb1000.h
index 50c1e41..b52e0e7 100644
--- a/include/asm-mips/mach-pb1x00/pb1000.h
+++ b/include/asm-mips/mach-pb1x00/pb1000.h
@@ -32,38 +32,38 @@
#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
#define PB1000_PCR 0xBE000000
- #define PCR_SLOT_0_VPP0 (1<<0)
- #define PCR_SLOT_0_VPP1 (1<<1)
- #define PCR_SLOT_0_VCC0 (1<<2)
- #define PCR_SLOT_0_VCC1 (1<<3)
- #define PCR_SLOT_0_RST (1<<4)
+# define PCR_SLOT_0_VPP0 (1<<0)
+# define PCR_SLOT_0_VPP1 (1<<1)
+# define PCR_SLOT_0_VCC0 (1<<2)
+# define PCR_SLOT_0_VCC1 (1<<3)
+# define PCR_SLOT_0_RST (1<<4)
- #define PCR_SLOT_1_VPP0 (1<<8)
- #define PCR_SLOT_1_VPP1 (1<<9)
- #define PCR_SLOT_1_VCC0 (1<<10)
- #define PCR_SLOT_1_VCC1 (1<<11)
- #define PCR_SLOT_1_RST (1<<12)
+# define PCR_SLOT_1_VPP0 (1<<8)
+# define PCR_SLOT_1_VPP1 (1<<9)
+# define PCR_SLOT_1_VCC0 (1<<10)
+# define PCR_SLOT_1_VCC1 (1<<11)
+# define PCR_SLOT_1_RST (1<<12)
#define PB1000_MDR 0xBE000004
- #define MDR_PI (1<<5) /* pcmcia int latch */
- #define MDR_EPI (1<<14) /* enable pcmcia int */
- #define MDR_CPI (1<<15) /* clear pcmcia int */
+# define MDR_PI (1<<5) /* pcmcia int latch */
+# define MDR_EPI (1<<14) /* enable pcmcia int */
+# define MDR_CPI (1<<15) /* clear pcmcia int */
#define PB1000_ACR1 0xBE000008
- #define ACR1_SLOT_0_CD1 (1<<0) /* card detect 1 */
- #define ACR1_SLOT_0_CD2 (1<<1) /* card detect 2 */
- #define ACR1_SLOT_0_READY (1<<2) /* ready */
- #define ACR1_SLOT_0_STATUS (1<<3) /* status change */
- #define ACR1_SLOT_0_VS1 (1<<4) /* voltage sense 1 */
- #define ACR1_SLOT_0_VS2 (1<<5) /* voltage sense 2 */
- #define ACR1_SLOT_0_INPACK (1<<6) /* inpack pin status */
- #define ACR1_SLOT_1_CD1 (1<<8) /* card detect 1 */
- #define ACR1_SLOT_1_CD2 (1<<9) /* card detect 2 */
- #define ACR1_SLOT_1_READY (1<<10) /* ready */
- #define ACR1_SLOT_1_STATUS (1<<11) /* status change */
- #define ACR1_SLOT_1_VS1 (1<<12) /* voltage sense 1 */
- #define ACR1_SLOT_1_VS2 (1<<13) /* voltage sense 2 */
- #define ACR1_SLOT_1_INPACK (1<<14) /* inpack pin status */
+# define ACR1_SLOT_0_CD1 (1<<0) /* card detect 1 */
+# define ACR1_SLOT_0_CD2 (1<<1) /* card detect 2 */
+# define ACR1_SLOT_0_READY (1<<2) /* ready */
+# define ACR1_SLOT_0_STATUS (1<<3) /* status change */
+# define ACR1_SLOT_0_VS1 (1<<4) /* voltage sense 1 */
+# define ACR1_SLOT_0_VS2 (1<<5) /* voltage sense 2 */
+# define ACR1_SLOT_0_INPACK (1<<6) /* inpack pin status */
+# define ACR1_SLOT_1_CD1 (1<<8) /* card detect 1 */
+# define ACR1_SLOT_1_CD2 (1<<9) /* card detect 2 */
+# define ACR1_SLOT_1_READY (1<<10) /* ready */
+# define ACR1_SLOT_1_STATUS (1<<11) /* status change */
+# define ACR1_SLOT_1_VS1 (1<<12) /* voltage sense 1 */
+# define ACR1_SLOT_1_VS2 (1<<13) /* voltage sense 2 */
+# define ACR1_SLOT_1_INPACK (1<<14) /* inpack pin status */
#define CPLD_AUX0 0xBE00000C
#define CPLD_AUX1 0xBE000010
diff --git a/include/asm-mips/mach-pb1x00/pb1100.h b/include/asm-mips/mach-pb1x00/pb1100.h
index 4c5a1cd..63aa392 100644
--- a/include/asm-mips/mach-pb1x00/pb1100.h
+++ b/include/asm-mips/mach-pb1x00/pb1100.h
@@ -29,44 +29,44 @@
#define PB1100_IDENT 0xAE000000
#define BOARD_STATUS_REG 0xAE000004
- #define PB1100_ROM_SEL (1<<15)
- #define PB1100_ROM_SIZ (1<<14)
- #define PB1100_SWAP_BOOT (1<<13)
- #define PB1100_FLASH_WP (1<<12)
- #define PB1100_ROM_H_STS (1<<11)
- #define PB1100_ROM_L_STS (1<<10)
- #define PB1100_FLASH_H_STS (1<<9)
- #define PB1100_FLASH_L_STS (1<<8)
- #define PB1100_SRAM_SIZ (1<<7)
- #define PB1100_TSC_BUSY (1<<6)
- #define PB1100_PCMCIA_VS_MASK (3<<4)
- #define PB1100_RS232_CD (1<<3)
- #define PB1100_RS232_CTS (1<<2)
- #define PB1100_RS232_DSR (1<<1)
- #define PB1100_RS232_RI (1<<0)
+# define PB1100_ROM_SEL (1<<15)
+# define PB1100_ROM_SIZ (1<<14)
+# define PB1100_SWAP_BOOT (1<<13)
+# define PB1100_FLASH_WP (1<<12)
+# define PB1100_ROM_H_STS (1<<11)
+# define PB1100_ROM_L_STS (1<<10)
+# define PB1100_FLASH_H_STS (1<<9)
+# define PB1100_FLASH_L_STS (1<<8)
+# define PB1100_SRAM_SIZ (1<<7)
+# define PB1100_TSC_BUSY (1<<6)
+# define PB1100_PCMCIA_VS_MASK (3<<4)
+# define PB1100_RS232_CD (1<<3)
+# define PB1100_RS232_CTS (1<<2)
+# define PB1100_RS232_DSR (1<<1)
+# define PB1100_RS232_RI (1<<0)
#define PB1100_IRDA_RS232 0xAE00000C
- #define PB1100_IRDA_FULL (0<<14) /* full power */
- #define PB1100_IRDA_SHUTDOWN (1<<14)
- #define PB1100_IRDA_TT (2<<14) /* 2/3 power */
- #define PB1100_IRDA_OT (3<<14) /* 1/3 power */
- #define PB1100_IRDA_FIR (1<<13)
+# define PB1100_IRDA_FULL (0<<14) /* full power */
+# define PB1100_IRDA_SHUTDOWN (1<<14)
+# define PB1100_IRDA_TT (2<<14) /* 2/3 power */
+# define PB1100_IRDA_OT (3<<14) /* 1/3 power */
+# define PB1100_IRDA_FIR (1<<13)
#define PCMCIA_BOARD_REG 0xAE000010
- #define PB1100_SD_WP1_RO (1<<15) /* read only */
- #define PB1100_SD_WP0_RO (1<<14) /* read only */
- #define PB1100_SD_PWR1 (1<<11) /* applies power to SD1 */
- #define PB1100_SD_PWR0 (1<<10) /* applies power to SD0 */
- #define PB1100_SEL_SD_CONN1 (1<<9)
- #define PB1100_SEL_SD_CONN0 (1<<8)
- #define PC_DEASSERT_RST (1<<7)
- #define PC_DRV_EN (1<<4)
+# define PB1100_SD_WP1_RO (1<<15) /* read only */
+# define PB1100_SD_WP0_RO (1<<14) /* read only */
+# define PB1100_SD_PWR1 (1<<11) /* applies power to SD1 */
+# define PB1100_SD_PWR0 (1<<10) /* applies power to SD0 */
+# define PB1100_SEL_SD_CONN1 (1<<9)
+# define PB1100_SEL_SD_CONN0 (1<<8)
+# define PC_DEASSERT_RST (1<<7)
+# define PC_DRV_EN (1<<4)
#define PB1100_G_CONTROL 0xAE000014 /* graphics control */
#define PB1100_RST_VDDI 0xAE00001C
- #define PB1100_SOFT_RESET (1<<15) /* clear to reset the board */
- #define PB1100_VDDI_MASK (0x1F)
+# define PB1100_SOFT_RESET (1<<15) /* clear to reset the board */
+# define PB1100_VDDI_MASK (0x1F)
#define PB1100_LEDS 0xAE000018