[SCSI] add queue_depth ramp up code
Current FC HBA queue_depth ramp up code depends on last queue
full time. The sdev already has last_queue_full_time field to
track last queue full time but stored value is truncated by
last four bits.
So this patch updates last_queue_full_time without truncating
last 4 bits to store full value and then updates its only
current usages in scsi_track_queue_full to ignore last four bits
to keep current usages same while also use this field
in added ramp up code.
Adds scsi_handle_queue_ramp_up to ramp up queue_depth on
successful completion of IO. The scsi_handle_queue_ramp_up will
do ramp up on all luns of a target, just same as ramp down done
on all luns on a target.
The ramp up is skipped in case the change_queue_depth is not
supported by LLD or already reached to added max_queue_depth.
Updates added max_queue_depth on every new update to default
queue_depth value.
The ramp up is also skipped if lapsed time since either last
queue ramp up or down is less than LLD specified
queue_ramp_up_period.
Adds queue_ramp_up_period to sysfs but only if change_queue_depth
is supported since ramp up and queue_ramp_up_period is needed only
in case change_queue_depth is supported first.
Initializes queue_ramp_up_period to 120HZ jiffies as initial
default value, it is same as used in existing lpfc and qla2xxx.
-v2
Combined all ramp code into this single patch.
-v3
Moves max_queue_depth initialization after slave_configure is
called from after slave_alloc calling done. Also adjusted
max_queue_depth check to skip ramp up if current queue_depth
is >= max_queue_depth.
-v4
Changes sdev->queue_ramp_up_period unit to ms when using sysfs i/f
to store or show its value.
Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Tested-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Tested-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 7b1e20f..08ed506 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -331,6 +331,42 @@
}
}
+static void scsi_handle_queue_ramp_up(struct scsi_device *sdev)
+{
+ struct scsi_host_template *sht = sdev->host->hostt;
+ struct scsi_device *tmp_sdev;
+
+ if (!sht->change_queue_depth ||
+ sdev->queue_depth >= sdev->max_queue_depth)
+ return;
+
+ if (time_before(jiffies,
+ sdev->last_queue_ramp_up + sdev->queue_ramp_up_period))
+ return;
+
+ if (time_before(jiffies,
+ sdev->last_queue_full_time + sdev->queue_ramp_up_period))
+ return;
+
+ /*
+ * Walk all devices of a target and do
+ * ramp up on them.
+ */
+ shost_for_each_device(tmp_sdev, sdev->host) {
+ if (tmp_sdev->channel != sdev->channel ||
+ tmp_sdev->id != sdev->id ||
+ tmp_sdev->queue_depth == sdev->max_queue_depth)
+ continue;
+ /*
+ * call back into LLD to increase queue_depth by one
+ * with ramp up reason code.
+ */
+ sht->change_queue_depth(tmp_sdev, tmp_sdev->queue_depth + 1,
+ SCSI_QDEPTH_RAMP_UP);
+ sdev->last_queue_ramp_up = jiffies;
+ }
+}
+
static void scsi_handle_queue_full(struct scsi_device *sdev)
{
struct scsi_host_template *sht = sdev->host->hostt;
@@ -393,6 +429,7 @@
*/
switch (status_byte(scmd->result)) {
case GOOD:
+ scsi_handle_queue_ramp_up(scmd->device);
case COMMAND_TERMINATED:
return SUCCESS;
case CHECK_CONDITION:
@@ -1425,6 +1462,7 @@
*/
return ADD_TO_MLQUEUE;
case GOOD:
+ scsi_handle_queue_ramp_up(scmd->device);
case COMMAND_TERMINATED:
return SUCCESS;
case TASK_ABORTED: