|  | /* | 
|  | NXP TDA10048HN DVB OFDM demodulator driver | 
|  |  | 
|  | Copyright (C) 2009 Steven Toth <stoth@kernellabs.com> | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify | 
|  | it under the terms of the GNU General Public License as published by | 
|  | the Free Software Foundation; either version 2 of the License, or | 
|  | (at your option) any later version. | 
|  |  | 
|  | This program is distributed in the hope that it will be useful, | 
|  | but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | GNU General Public License for more details. | 
|  |  | 
|  | You should have received a copy of the GNU General Public License | 
|  | along with this program; if not, write to the Free Software | 
|  | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  |  | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/math64.h> | 
|  | #include <asm/div64.h> | 
|  | #include "dvb_frontend.h" | 
|  | #include "dvb_math.h" | 
|  | #include "tda10048.h" | 
|  |  | 
|  | #define TDA10048_DEFAULT_FIRMWARE "dvb-fe-tda10048-1.0.fw" | 
|  | #define TDA10048_DEFAULT_FIRMWARE_SIZE 24878 | 
|  |  | 
|  | /* Register name definitions */ | 
|  | #define TDA10048_IDENTITY          0x00 | 
|  | #define TDA10048_VERSION           0x01 | 
|  | #define TDA10048_DSP_CODE_CPT      0x0C | 
|  | #define TDA10048_DSP_CODE_IN       0x0E | 
|  | #define TDA10048_IN_CONF1          0x10 | 
|  | #define TDA10048_IN_CONF2          0x11 | 
|  | #define TDA10048_IN_CONF3          0x12 | 
|  | #define TDA10048_OUT_CONF1         0x14 | 
|  | #define TDA10048_OUT_CONF2         0x15 | 
|  | #define TDA10048_OUT_CONF3         0x16 | 
|  | #define TDA10048_AUTO              0x18 | 
|  | #define TDA10048_SYNC_STATUS       0x1A | 
|  | #define TDA10048_CONF_C4_1         0x1E | 
|  | #define TDA10048_CONF_C4_2         0x1F | 
|  | #define TDA10048_CODE_IN_RAM       0x20 | 
|  | #define TDA10048_CHANNEL_INFO1_R   0x22 | 
|  | #define TDA10048_CHANNEL_INFO2_R   0x23 | 
|  | #define TDA10048_CHANNEL_INFO1     0x24 | 
|  | #define TDA10048_CHANNEL_INFO2     0x25 | 
|  | #define TDA10048_TIME_ERROR_R      0x26 | 
|  | #define TDA10048_TIME_ERROR        0x27 | 
|  | #define TDA10048_FREQ_ERROR_LSB_R  0x28 | 
|  | #define TDA10048_FREQ_ERROR_MSB_R  0x29 | 
|  | #define TDA10048_FREQ_ERROR_LSB    0x2A | 
|  | #define TDA10048_FREQ_ERROR_MSB    0x2B | 
|  | #define TDA10048_IT_SEL            0x30 | 
|  | #define TDA10048_IT_STAT           0x32 | 
|  | #define TDA10048_DSP_AD_LSB        0x3C | 
|  | #define TDA10048_DSP_AD_MSB        0x3D | 
|  | #define TDA10048_DSP_REG_LSB       0x3E | 
|  | #define TDA10048_DSP_REG_MSB       0x3F | 
|  | #define TDA10048_CONF_TRISTATE1    0x44 | 
|  | #define TDA10048_CONF_TRISTATE2    0x45 | 
|  | #define TDA10048_CONF_POLARITY     0x46 | 
|  | #define TDA10048_GPIO_SP_DS0       0x48 | 
|  | #define TDA10048_GPIO_SP_DS1       0x49 | 
|  | #define TDA10048_GPIO_SP_DS2       0x4A | 
|  | #define TDA10048_GPIO_SP_DS3       0x4B | 
|  | #define TDA10048_GPIO_OUT_SEL      0x4C | 
|  | #define TDA10048_GPIO_SELECT       0x4D | 
|  | #define TDA10048_IC_MODE           0x4E | 
|  | #define TDA10048_CONF_XO           0x50 | 
|  | #define TDA10048_CONF_PLL1         0x51 | 
|  | #define TDA10048_CONF_PLL2         0x52 | 
|  | #define TDA10048_CONF_PLL3         0x53 | 
|  | #define TDA10048_CONF_ADC          0x54 | 
|  | #define TDA10048_CONF_ADC_2        0x55 | 
|  | #define TDA10048_CONF_C1_1         0x60 | 
|  | #define TDA10048_CONF_C1_3         0x62 | 
|  | #define TDA10048_AGC_CONF          0x70 | 
|  | #define TDA10048_AGC_THRESHOLD_LSB 0x72 | 
|  | #define TDA10048_AGC_THRESHOLD_MSB 0x73 | 
|  | #define TDA10048_AGC_RENORM        0x74 | 
|  | #define TDA10048_AGC_GAINS         0x76 | 
|  | #define TDA10048_AGC_TUN_MIN       0x78 | 
|  | #define TDA10048_AGC_TUN_MAX       0x79 | 
|  | #define TDA10048_AGC_IF_MIN        0x7A | 
|  | #define TDA10048_AGC_IF_MAX        0x7B | 
|  | #define TDA10048_AGC_TUN_LEVEL     0x7E | 
|  | #define TDA10048_AGC_IF_LEVEL      0x7F | 
|  | #define TDA10048_DIG_AGC_LEVEL     0x81 | 
|  | #define TDA10048_FREQ_PHY2_LSB     0x86 | 
|  | #define TDA10048_FREQ_PHY2_MSB     0x87 | 
|  | #define TDA10048_TIME_INVWREF_LSB  0x88 | 
|  | #define TDA10048_TIME_INVWREF_MSB  0x89 | 
|  | #define TDA10048_TIME_WREF_LSB     0x8A | 
|  | #define TDA10048_TIME_WREF_MID1    0x8B | 
|  | #define TDA10048_TIME_WREF_MID2    0x8C | 
|  | #define TDA10048_TIME_WREF_MSB     0x8D | 
|  | #define TDA10048_NP_OUT            0xA2 | 
|  | #define TDA10048_CELL_ID_LSB       0xA4 | 
|  | #define TDA10048_CELL_ID_MSB       0xA5 | 
|  | #define TDA10048_EXTTPS_ODD        0xAA | 
|  | #define TDA10048_EXTTPS_EVEN       0xAB | 
|  | #define TDA10048_TPS_LENGTH        0xAC | 
|  | #define TDA10048_FREE_REG_1        0xB2 | 
|  | #define TDA10048_FREE_REG_2        0xB3 | 
|  | #define TDA10048_CONF_C3_1         0xC0 | 
|  | #define TDA10048_CVBER_CTRL        0xC2 | 
|  | #define TDA10048_CBER_NMAX_LSB     0xC4 | 
|  | #define TDA10048_CBER_NMAX_MSB     0xC5 | 
|  | #define TDA10048_CBER_LSB          0xC6 | 
|  | #define TDA10048_CBER_MSB          0xC7 | 
|  | #define TDA10048_VBER_LSB          0xC8 | 
|  | #define TDA10048_VBER_MID          0xC9 | 
|  | #define TDA10048_VBER_MSB          0xCA | 
|  | #define TDA10048_CVBER_LUT         0xCC | 
|  | #define TDA10048_UNCOR_CTRL        0xCD | 
|  | #define TDA10048_UNCOR_CPT_LSB     0xCE | 
|  | #define TDA10048_UNCOR_CPT_MSB     0xCF | 
|  | #define TDA10048_SOFT_IT_C3        0xD6 | 
|  | #define TDA10048_CONF_TS2          0xE0 | 
|  | #define TDA10048_CONF_TS1          0xE1 | 
|  |  | 
|  | static unsigned int debug; | 
|  |  | 
|  | #define dprintk(level, fmt, arg...)\ | 
|  | do { if (debug >= level)\ | 
|  | printk(KERN_DEBUG "tda10048: " fmt, ## arg);\ | 
|  | } while (0) | 
|  |  | 
|  | struct tda10048_state { | 
|  |  | 
|  | struct i2c_adapter *i2c; | 
|  |  | 
|  | /* We'll cache and update the attach config settings */ | 
|  | struct tda10048_config config; | 
|  | struct dvb_frontend frontend; | 
|  |  | 
|  | int fwloaded; | 
|  |  | 
|  | u32 freq_if_hz; | 
|  | u32 xtal_hz; | 
|  | u32 pll_mfactor; | 
|  | u32 pll_nfactor; | 
|  | u32 pll_pfactor; | 
|  | u32 sample_freq; | 
|  |  | 
|  | enum fe_bandwidth bandwidth; | 
|  | }; | 
|  |  | 
|  | static struct init_tab { | 
|  | u8	reg; | 
|  | u16	data; | 
|  | } init_tab[] = { | 
|  | { TDA10048_CONF_PLL1, 0x08 }, | 
|  | { TDA10048_CONF_ADC_2, 0x00 }, | 
|  | { TDA10048_CONF_C4_1, 0x00 }, | 
|  | { TDA10048_CONF_PLL1, 0x0f }, | 
|  | { TDA10048_CONF_PLL2, 0x0a }, | 
|  | { TDA10048_CONF_PLL3, 0x43 }, | 
|  | { TDA10048_FREQ_PHY2_LSB, 0x02 }, | 
|  | { TDA10048_FREQ_PHY2_MSB, 0x0a }, | 
|  | { TDA10048_TIME_WREF_LSB, 0xbd }, | 
|  | { TDA10048_TIME_WREF_MID1, 0xe4 }, | 
|  | { TDA10048_TIME_WREF_MID2, 0xa8 }, | 
|  | { TDA10048_TIME_WREF_MSB, 0x02 }, | 
|  | { TDA10048_TIME_INVWREF_LSB, 0x04 }, | 
|  | { TDA10048_TIME_INVWREF_MSB, 0x06 }, | 
|  | { TDA10048_CONF_C4_1, 0x00 }, | 
|  | { TDA10048_CONF_C1_1, 0xa8 }, | 
|  | { TDA10048_AGC_CONF, 0x16 }, | 
|  | { TDA10048_CONF_C1_3, 0x0b }, | 
|  | { TDA10048_AGC_TUN_MIN, 0x00 }, | 
|  | { TDA10048_AGC_TUN_MAX, 0xff }, | 
|  | { TDA10048_AGC_IF_MIN, 0x00 }, | 
|  | { TDA10048_AGC_IF_MAX, 0xff }, | 
|  | { TDA10048_AGC_THRESHOLD_MSB, 0x00 }, | 
|  | { TDA10048_AGC_THRESHOLD_LSB, 0x70 }, | 
|  | { TDA10048_CVBER_CTRL, 0x38 }, | 
|  | { TDA10048_AGC_GAINS, 0x12 }, | 
|  | { TDA10048_CONF_XO, 0x00 }, | 
|  | { TDA10048_CONF_TS1, 0x07 }, | 
|  | { TDA10048_IC_MODE, 0x00 }, | 
|  | { TDA10048_CONF_TS2, 0xc0 }, | 
|  | { TDA10048_CONF_TRISTATE1, 0x21 }, | 
|  | { TDA10048_CONF_TRISTATE2, 0x00 }, | 
|  | { TDA10048_CONF_POLARITY, 0x00 }, | 
|  | { TDA10048_CONF_C4_2, 0x04 }, | 
|  | { TDA10048_CONF_ADC, 0x60 }, | 
|  | { TDA10048_CONF_ADC_2, 0x10 }, | 
|  | { TDA10048_CONF_ADC, 0x60 }, | 
|  | { TDA10048_CONF_ADC_2, 0x00 }, | 
|  | { TDA10048_CONF_C1_1, 0xa8 }, | 
|  | { TDA10048_UNCOR_CTRL, 0x00 }, | 
|  | { TDA10048_CONF_C4_2, 0x04 }, | 
|  | }; | 
|  |  | 
|  | static struct pll_tab { | 
|  | u32	clk_freq_khz; | 
|  | u32	if_freq_khz; | 
|  | u8	m, n, p; | 
|  | } pll_tab[] = { | 
|  | { TDA10048_CLK_4000,  TDA10048_IF_36130, 10, 0, 0 }, | 
|  | { TDA10048_CLK_16000, TDA10048_IF_3300,  10, 3, 0 }, | 
|  | { TDA10048_CLK_16000, TDA10048_IF_3500,  10, 3, 0 }, | 
|  | { TDA10048_CLK_16000, TDA10048_IF_3800,  10, 3, 0 }, | 
|  | { TDA10048_CLK_16000, TDA10048_IF_4000,  10, 3, 0 }, | 
|  | { TDA10048_CLK_16000, TDA10048_IF_4300,  10, 3, 0 }, | 
|  | { TDA10048_CLK_16000, TDA10048_IF_36130, 10, 3, 0 }, | 
|  | }; | 
|  |  | 
|  | static int tda10048_writereg(struct tda10048_state *state, u8 reg, u8 data) | 
|  | { | 
|  | struct tda10048_config *config = &state->config; | 
|  | int ret; | 
|  | u8 buf[] = { reg, data }; | 
|  | struct i2c_msg msg = { | 
|  | .addr = config->demod_address, | 
|  | .flags = 0, .buf = buf, .len = 2 }; | 
|  |  | 
|  | dprintk(2, "%s(reg = 0x%02x, data = 0x%02x)\n", __func__, reg, data); | 
|  |  | 
|  | ret = i2c_transfer(state->i2c, &msg, 1); | 
|  |  | 
|  | if (ret != 1) | 
|  | printk("%s: writereg error (ret == %i)\n", __func__, ret); | 
|  |  | 
|  | return (ret != 1) ? -1 : 0; | 
|  | } | 
|  |  | 
|  | static u8 tda10048_readreg(struct tda10048_state *state, u8 reg) | 
|  | { | 
|  | struct tda10048_config *config = &state->config; | 
|  | int ret; | 
|  | u8 b0[] = { reg }; | 
|  | u8 b1[] = { 0 }; | 
|  | struct i2c_msg msg[] = { | 
|  | { .addr = config->demod_address, | 
|  | .flags = 0, .buf = b0, .len = 1 }, | 
|  | { .addr = config->demod_address, | 
|  | .flags = I2C_M_RD, .buf = b1, .len = 1 } }; | 
|  |  | 
|  | dprintk(2, "%s(reg = 0x%02x)\n", __func__, reg); | 
|  |  | 
|  | ret = i2c_transfer(state->i2c, msg, 2); | 
|  |  | 
|  | if (ret != 2) | 
|  | printk(KERN_ERR "%s: readreg error (ret == %i)\n", | 
|  | __func__, ret); | 
|  |  | 
|  | return b1[0]; | 
|  | } | 
|  |  | 
|  | static int tda10048_writeregbulk(struct tda10048_state *state, u8 reg, | 
|  | const u8 *data, u16 len) | 
|  | { | 
|  | struct tda10048_config *config = &state->config; | 
|  | int ret = -EREMOTEIO; | 
|  | struct i2c_msg msg; | 
|  | u8 *buf; | 
|  |  | 
|  | dprintk(2, "%s(%d, ?, len = %d)\n", __func__, reg, len); | 
|  |  | 
|  | buf = kmalloc(len + 1, GFP_KERNEL); | 
|  | if (buf == NULL) { | 
|  | ret = -ENOMEM; | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | *buf = reg; | 
|  | memcpy(buf + 1, data, len); | 
|  |  | 
|  | msg.addr = config->demod_address; | 
|  | msg.flags = 0; | 
|  | msg.buf = buf; | 
|  | msg.len = len + 1; | 
|  |  | 
|  | dprintk(2, "%s():  write len = %d\n", | 
|  | __func__, msg.len); | 
|  |  | 
|  | ret = i2c_transfer(state->i2c, &msg, 1); | 
|  | if (ret != 1) { | 
|  | printk(KERN_ERR "%s(): writereg error err %i\n", | 
|  | __func__, ret); | 
|  | ret = -EREMOTEIO; | 
|  | } | 
|  |  | 
|  | error: | 
|  | kfree(buf); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int tda10048_set_phy2(struct dvb_frontend *fe, u32 sample_freq_hz, | 
|  | u32 if_hz) | 
|  | { | 
|  | struct tda10048_state *state = fe->demodulator_priv; | 
|  | u64 t; | 
|  |  | 
|  | dprintk(1, "%s()\n", __func__); | 
|  |  | 
|  | if (sample_freq_hz == 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (if_hz < (sample_freq_hz / 2)) { | 
|  | /* PHY2 = (if2/fs) * 2^15 */ | 
|  | t = if_hz; | 
|  | t *= 10; | 
|  | t *= 32768; | 
|  | do_div(t, sample_freq_hz); | 
|  | t += 5; | 
|  | do_div(t, 10); | 
|  | } else { | 
|  | /* PHY2 = ((IF1-fs)/fs) * 2^15 */ | 
|  | t = sample_freq_hz - if_hz; | 
|  | t *= 10; | 
|  | t *= 32768; | 
|  | do_div(t, sample_freq_hz); | 
|  | t += 5; | 
|  | do_div(t, 10); | 
|  | t = ~t + 1; | 
|  | } | 
|  |  | 
|  | tda10048_writereg(state, TDA10048_FREQ_PHY2_LSB, (u8)t); | 
|  | tda10048_writereg(state, TDA10048_FREQ_PHY2_MSB, (u8)(t >> 8)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tda10048_set_wref(struct dvb_frontend *fe, u32 sample_freq_hz, | 
|  | u32 bw) | 
|  | { | 
|  | struct tda10048_state *state = fe->demodulator_priv; | 
|  | u64 t, z; | 
|  | u32 b = 8000000; | 
|  |  | 
|  | dprintk(1, "%s()\n", __func__); | 
|  |  | 
|  | if (sample_freq_hz == 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (bw == BANDWIDTH_6_MHZ) | 
|  | b = 6000000; | 
|  | else | 
|  | if (bw == BANDWIDTH_7_MHZ) | 
|  | b = 7000000; | 
|  |  | 
|  | /* WREF = (B / (7 * fs)) * 2^31 */ | 
|  | t = b * 10; | 
|  | /* avoid warning: this decimal constant is unsigned only in ISO C90 */ | 
|  | /* t *= 2147483648 on 32bit platforms */ | 
|  | t *= (2048 * 1024); | 
|  | t *= 1024; | 
|  | z = 7 * sample_freq_hz; | 
|  | do_div(t, z); | 
|  | t += 5; | 
|  | do_div(t, 10); | 
|  |  | 
|  | tda10048_writereg(state, TDA10048_TIME_WREF_LSB, (u8)t); | 
|  | tda10048_writereg(state, TDA10048_TIME_WREF_MID1, (u8)(t >> 8)); | 
|  | tda10048_writereg(state, TDA10048_TIME_WREF_MID2, (u8)(t >> 16)); | 
|  | tda10048_writereg(state, TDA10048_TIME_WREF_MSB, (u8)(t >> 24)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tda10048_set_invwref(struct dvb_frontend *fe, u32 sample_freq_hz, | 
|  | u32 bw) | 
|  | { | 
|  | struct tda10048_state *state = fe->demodulator_priv; | 
|  | u64 t; | 
|  | u32 b = 8000000; | 
|  |  | 
|  | dprintk(1, "%s()\n", __func__); | 
|  |  | 
|  | if (sample_freq_hz == 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (bw == BANDWIDTH_6_MHZ) | 
|  | b = 6000000; | 
|  | else | 
|  | if (bw == BANDWIDTH_7_MHZ) | 
|  | b = 7000000; | 
|  |  | 
|  | /* INVWREF = ((7 * fs) / B) * 2^5 */ | 
|  | t = sample_freq_hz; | 
|  | t *= 7; | 
|  | t *= 32; | 
|  | t *= 10; | 
|  | do_div(t, b); | 
|  | t += 5; | 
|  | do_div(t, 10); | 
|  |  | 
|  | tda10048_writereg(state, TDA10048_TIME_INVWREF_LSB, (u8)t); | 
|  | tda10048_writereg(state, TDA10048_TIME_INVWREF_MSB, (u8)(t >> 8)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tda10048_set_bandwidth(struct dvb_frontend *fe, | 
|  | enum fe_bandwidth bw) | 
|  | { | 
|  | struct tda10048_state *state = fe->demodulator_priv; | 
|  | dprintk(1, "%s(bw=%d)\n", __func__, bw); | 
|  |  | 
|  | /* Bandwidth setting may need to be adjusted */ | 
|  | switch (bw) { | 
|  | case BANDWIDTH_6_MHZ: | 
|  | case BANDWIDTH_7_MHZ: | 
|  | case BANDWIDTH_8_MHZ: | 
|  | tda10048_set_wref(fe, state->sample_freq, bw); | 
|  | tda10048_set_invwref(fe, state->sample_freq, bw); | 
|  | break; | 
|  | default: | 
|  | printk(KERN_ERR "%s() invalid bandwidth\n", __func__); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | state->bandwidth = bw; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tda10048_set_if(struct dvb_frontend *fe, enum fe_bandwidth bw) | 
|  | { | 
|  | struct tda10048_state *state = fe->demodulator_priv; | 
|  | struct tda10048_config *config = &state->config; | 
|  | int i; | 
|  | u32 if_freq_khz; | 
|  |  | 
|  | dprintk(1, "%s(bw = %d)\n", __func__, bw); | 
|  |  | 
|  | /* based on target bandwidth and clk we calculate pll factors */ | 
|  | switch (bw) { | 
|  | case BANDWIDTH_6_MHZ: | 
|  | if_freq_khz = config->dtv6_if_freq_khz; | 
|  | break; | 
|  | case BANDWIDTH_7_MHZ: | 
|  | if_freq_khz = config->dtv7_if_freq_khz; | 
|  | break; | 
|  | case BANDWIDTH_8_MHZ: | 
|  | if_freq_khz = config->dtv8_if_freq_khz; | 
|  | break; | 
|  | default: | 
|  | printk(KERN_ERR "%s() no default\n", __func__); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(pll_tab); i++) { | 
|  | if ((pll_tab[i].clk_freq_khz == config->clk_freq_khz) && | 
|  | (pll_tab[i].if_freq_khz == if_freq_khz)) { | 
|  |  | 
|  | state->freq_if_hz = pll_tab[i].if_freq_khz * 1000; | 
|  | state->xtal_hz = pll_tab[i].clk_freq_khz * 1000; | 
|  | state->pll_mfactor = pll_tab[i].m; | 
|  | state->pll_nfactor = pll_tab[i].n; | 
|  | state->pll_pfactor = pll_tab[i].p; | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (i == ARRAY_SIZE(pll_tab)) { | 
|  | printk(KERN_ERR "%s() Incorrect attach settings\n", | 
|  | __func__); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | dprintk(1, "- freq_if_hz = %d\n", state->freq_if_hz); | 
|  | dprintk(1, "- xtal_hz = %d\n", state->xtal_hz); | 
|  | dprintk(1, "- pll_mfactor = %d\n", state->pll_mfactor); | 
|  | dprintk(1, "- pll_nfactor = %d\n", state->pll_nfactor); | 
|  | dprintk(1, "- pll_pfactor = %d\n", state->pll_pfactor); | 
|  |  | 
|  | /* Calculate the sample frequency */ | 
|  | state->sample_freq = state->xtal_hz * (state->pll_mfactor + 45); | 
|  | state->sample_freq /= (state->pll_nfactor + 1); | 
|  | state->sample_freq /= (state->pll_pfactor + 4); | 
|  | dprintk(1, "- sample_freq = %d\n", state->sample_freq); | 
|  |  | 
|  | /* Update the I/F */ | 
|  | tda10048_set_phy2(fe, state->sample_freq, state->freq_if_hz); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tda10048_firmware_upload(struct dvb_frontend *fe) | 
|  | { | 
|  | struct tda10048_state *state = fe->demodulator_priv; | 
|  | struct tda10048_config *config = &state->config; | 
|  | const struct firmware *fw; | 
|  | int ret; | 
|  | int pos = 0; | 
|  | int cnt; | 
|  | u8 wlen = config->fwbulkwritelen; | 
|  |  | 
|  | if ((wlen != TDA10048_BULKWRITE_200) && (wlen != TDA10048_BULKWRITE_50)) | 
|  | wlen = TDA10048_BULKWRITE_200; | 
|  |  | 
|  | /* request the firmware, this will block and timeout */ | 
|  | printk(KERN_INFO "%s: waiting for firmware upload (%s)...\n", | 
|  | __func__, | 
|  | TDA10048_DEFAULT_FIRMWARE); | 
|  |  | 
|  | ret = request_firmware(&fw, TDA10048_DEFAULT_FIRMWARE, | 
|  | state->i2c->dev.parent); | 
|  | if (ret) { | 
|  | printk(KERN_ERR "%s: Upload failed. (file not found?)\n", | 
|  | __func__); | 
|  | return -EIO; | 
|  | } else { | 
|  | printk(KERN_INFO "%s: firmware read %Zu bytes.\n", | 
|  | __func__, | 
|  | fw->size); | 
|  | ret = 0; | 
|  | } | 
|  |  | 
|  | if (fw->size != TDA10048_DEFAULT_FIRMWARE_SIZE) { | 
|  | printk(KERN_ERR "%s: firmware incorrect size\n", __func__); | 
|  | ret = -EIO; | 
|  | } else { | 
|  | printk(KERN_INFO "%s: firmware uploading\n", __func__); | 
|  |  | 
|  | /* Soft reset */ | 
|  | tda10048_writereg(state, TDA10048_CONF_TRISTATE1, | 
|  | tda10048_readreg(state, TDA10048_CONF_TRISTATE1) | 
|  | & 0xfe); | 
|  | tda10048_writereg(state, TDA10048_CONF_TRISTATE1, | 
|  | tda10048_readreg(state, TDA10048_CONF_TRISTATE1) | 
|  | | 0x01); | 
|  |  | 
|  | /* Put the demod into host download mode */ | 
|  | tda10048_writereg(state, TDA10048_CONF_C4_1, | 
|  | tda10048_readreg(state, TDA10048_CONF_C4_1) & 0xf9); | 
|  |  | 
|  | /* Boot the DSP */ | 
|  | tda10048_writereg(state, TDA10048_CONF_C4_1, | 
|  | tda10048_readreg(state, TDA10048_CONF_C4_1) | 0x08); | 
|  |  | 
|  | /* Prepare for download */ | 
|  | tda10048_writereg(state, TDA10048_DSP_CODE_CPT, 0); | 
|  |  | 
|  | /* Download the firmware payload */ | 
|  | while (pos < fw->size) { | 
|  |  | 
|  | if ((fw->size - pos) > wlen) | 
|  | cnt = wlen; | 
|  | else | 
|  | cnt = fw->size - pos; | 
|  |  | 
|  | tda10048_writeregbulk(state, TDA10048_DSP_CODE_IN, | 
|  | &fw->data[pos], cnt); | 
|  |  | 
|  | pos += cnt; | 
|  | } | 
|  |  | 
|  | ret = -EIO; | 
|  | /* Wait up to 250ms for the DSP to boot */ | 
|  | for (cnt = 0; cnt < 250 ; cnt += 10) { | 
|  |  | 
|  | msleep(10); | 
|  |  | 
|  | if (tda10048_readreg(state, TDA10048_SYNC_STATUS) | 
|  | & 0x40) { | 
|  | ret = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | release_firmware(fw); | 
|  |  | 
|  | if (ret == 0) { | 
|  | printk(KERN_INFO "%s: firmware uploaded\n", __func__); | 
|  | state->fwloaded = 1; | 
|  | } else | 
|  | printk(KERN_ERR "%s: firmware upload failed\n", __func__); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int tda10048_set_inversion(struct dvb_frontend *fe, int inversion) | 
|  | { | 
|  | struct tda10048_state *state = fe->demodulator_priv; | 
|  |  | 
|  | dprintk(1, "%s(%d)\n", __func__, inversion); | 
|  |  | 
|  | if (inversion == TDA10048_INVERSION_ON) | 
|  | tda10048_writereg(state, TDA10048_CONF_C1_1, | 
|  | tda10048_readreg(state, TDA10048_CONF_C1_1) | 0x20); | 
|  | else | 
|  | tda10048_writereg(state, TDA10048_CONF_C1_1, | 
|  | tda10048_readreg(state, TDA10048_CONF_C1_1) & 0xdf); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Retrieve the demod settings */ | 
|  | static int tda10048_get_tps(struct tda10048_state *state, | 
|  | struct dvb_ofdm_parameters *p) | 
|  | { | 
|  | u8 val; | 
|  |  | 
|  | /* Make sure the TPS regs are valid */ | 
|  | if (!(tda10048_readreg(state, TDA10048_AUTO) & 0x01)) | 
|  | return -EAGAIN; | 
|  |  | 
|  | val = tda10048_readreg(state, TDA10048_OUT_CONF2); | 
|  | switch ((val & 0x60) >> 5) { | 
|  | case 0: | 
|  | p->constellation = QPSK; | 
|  | break; | 
|  | case 1: | 
|  | p->constellation = QAM_16; | 
|  | break; | 
|  | case 2: | 
|  | p->constellation = QAM_64; | 
|  | break; | 
|  | } | 
|  | switch ((val & 0x18) >> 3) { | 
|  | case 0: | 
|  | p->hierarchy_information = HIERARCHY_NONE; | 
|  | break; | 
|  | case 1: | 
|  | p->hierarchy_information = HIERARCHY_1; | 
|  | break; | 
|  | case 2: | 
|  | p->hierarchy_information = HIERARCHY_2; | 
|  | break; | 
|  | case 3: | 
|  | p->hierarchy_information = HIERARCHY_4; | 
|  | break; | 
|  | } | 
|  | switch (val & 0x07) { | 
|  | case 0: | 
|  | p->code_rate_HP = FEC_1_2; | 
|  | break; | 
|  | case 1: | 
|  | p->code_rate_HP = FEC_2_3; | 
|  | break; | 
|  | case 2: | 
|  | p->code_rate_HP = FEC_3_4; | 
|  | break; | 
|  | case 3: | 
|  | p->code_rate_HP = FEC_5_6; | 
|  | break; | 
|  | case 4: | 
|  | p->code_rate_HP = FEC_7_8; | 
|  | break; | 
|  | } | 
|  |  | 
|  | val = tda10048_readreg(state, TDA10048_OUT_CONF3); | 
|  | switch (val & 0x07) { | 
|  | case 0: | 
|  | p->code_rate_LP = FEC_1_2; | 
|  | break; | 
|  | case 1: | 
|  | p->code_rate_LP = FEC_2_3; | 
|  | break; | 
|  | case 2: | 
|  | p->code_rate_LP = FEC_3_4; | 
|  | break; | 
|  | case 3: | 
|  | p->code_rate_LP = FEC_5_6; | 
|  | break; | 
|  | case 4: | 
|  | p->code_rate_LP = FEC_7_8; | 
|  | break; | 
|  | } | 
|  |  | 
|  | val = tda10048_readreg(state, TDA10048_OUT_CONF1); | 
|  | switch ((val & 0x0c) >> 2) { | 
|  | case 0: | 
|  | p->guard_interval = GUARD_INTERVAL_1_32; | 
|  | break; | 
|  | case 1: | 
|  | p->guard_interval = GUARD_INTERVAL_1_16; | 
|  | break; | 
|  | case 2: | 
|  | p->guard_interval =  GUARD_INTERVAL_1_8; | 
|  | break; | 
|  | case 3: | 
|  | p->guard_interval =  GUARD_INTERVAL_1_4; | 
|  | break; | 
|  | } | 
|  | switch (val & 0x03) { | 
|  | case 0: | 
|  | p->transmission_mode = TRANSMISSION_MODE_2K; | 
|  | break; | 
|  | case 1: | 
|  | p->transmission_mode = TRANSMISSION_MODE_8K; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tda10048_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) | 
|  | { | 
|  | struct tda10048_state *state = fe->demodulator_priv; | 
|  | struct tda10048_config *config = &state->config; | 
|  | dprintk(1, "%s(%d)\n", __func__, enable); | 
|  |  | 
|  | if (config->disable_gate_access) | 
|  | return 0; | 
|  |  | 
|  | if (enable) | 
|  | return tda10048_writereg(state, TDA10048_CONF_C4_1, | 
|  | tda10048_readreg(state, TDA10048_CONF_C4_1) | 0x02); | 
|  | else | 
|  | return tda10048_writereg(state, TDA10048_CONF_C4_1, | 
|  | tda10048_readreg(state, TDA10048_CONF_C4_1) & 0xfd); | 
|  | } | 
|  |  | 
|  | static int tda10048_output_mode(struct dvb_frontend *fe, int serial) | 
|  | { | 
|  | struct tda10048_state *state = fe->demodulator_priv; | 
|  | dprintk(1, "%s(%d)\n", __func__, serial); | 
|  |  | 
|  | /* Ensure pins are out of tri-state */ | 
|  | tda10048_writereg(state, TDA10048_CONF_TRISTATE1, 0x21); | 
|  | tda10048_writereg(state, TDA10048_CONF_TRISTATE2, 0x00); | 
|  |  | 
|  | if (serial) { | 
|  | tda10048_writereg(state, TDA10048_IC_MODE, 0x80 | 0x20); | 
|  | tda10048_writereg(state, TDA10048_CONF_TS2, 0xc0); | 
|  | } else { | 
|  | tda10048_writereg(state, TDA10048_IC_MODE, 0x00); | 
|  | tda10048_writereg(state, TDA10048_CONF_TS2, 0x01); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Talk to the demod, set the FEC, GUARD, QAM settings etc */ | 
|  | /* TODO: Support manual tuning with specific params */ | 
|  | static int tda10048_set_frontend(struct dvb_frontend *fe, | 
|  | struct dvb_frontend_parameters *p) | 
|  | { | 
|  | struct tda10048_state *state = fe->demodulator_priv; | 
|  |  | 
|  | dprintk(1, "%s(frequency=%d)\n", __func__, p->frequency); | 
|  |  | 
|  | /* Update the I/F pll's if the bandwidth changes */ | 
|  | if (p->u.ofdm.bandwidth != state->bandwidth) { | 
|  | tda10048_set_if(fe, p->u.ofdm.bandwidth); | 
|  | tda10048_set_bandwidth(fe, p->u.ofdm.bandwidth); | 
|  | } | 
|  |  | 
|  | if (fe->ops.tuner_ops.set_params) { | 
|  |  | 
|  | if (fe->ops.i2c_gate_ctrl) | 
|  | fe->ops.i2c_gate_ctrl(fe, 1); | 
|  |  | 
|  | fe->ops.tuner_ops.set_params(fe, p); | 
|  |  | 
|  | if (fe->ops.i2c_gate_ctrl) | 
|  | fe->ops.i2c_gate_ctrl(fe, 0); | 
|  | } | 
|  |  | 
|  | /* Enable demod TPS auto detection and begin acquisition */ | 
|  | tda10048_writereg(state, TDA10048_AUTO, 0x57); | 
|  | /* trigger cber and vber acquisition */ | 
|  | tda10048_writereg(state, TDA10048_CVBER_CTRL, 0x3B); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Establish sane defaults and load firmware. */ | 
|  | static int tda10048_init(struct dvb_frontend *fe) | 
|  | { | 
|  | struct tda10048_state *state = fe->demodulator_priv; | 
|  | struct tda10048_config *config = &state->config; | 
|  | int ret = 0, i; | 
|  |  | 
|  | dprintk(1, "%s()\n", __func__); | 
|  |  | 
|  | /* Apply register defaults */ | 
|  | for (i = 0; i < ARRAY_SIZE(init_tab); i++) | 
|  | tda10048_writereg(state, init_tab[i].reg, init_tab[i].data); | 
|  |  | 
|  | if (state->fwloaded == 0) | 
|  | ret = tda10048_firmware_upload(fe); | 
|  |  | 
|  | /* Set either serial or parallel */ | 
|  | tda10048_output_mode(fe, config->output_mode); | 
|  |  | 
|  | /* Set inversion */ | 
|  | tda10048_set_inversion(fe, config->inversion); | 
|  |  | 
|  | /* Establish default RF values */ | 
|  | tda10048_set_if(fe, BANDWIDTH_8_MHZ); | 
|  | tda10048_set_bandwidth(fe, BANDWIDTH_8_MHZ); | 
|  |  | 
|  | /* Ensure we leave the gate closed */ | 
|  | tda10048_i2c_gate_ctrl(fe, 0); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int tda10048_read_status(struct dvb_frontend *fe, fe_status_t *status) | 
|  | { | 
|  | struct tda10048_state *state = fe->demodulator_priv; | 
|  | u8 reg; | 
|  |  | 
|  | *status = 0; | 
|  |  | 
|  | reg = tda10048_readreg(state, TDA10048_SYNC_STATUS); | 
|  |  | 
|  | dprintk(1, "%s() status =0x%02x\n", __func__, reg); | 
|  |  | 
|  | if (reg & 0x02) | 
|  | *status |= FE_HAS_CARRIER; | 
|  |  | 
|  | if (reg & 0x04) | 
|  | *status |= FE_HAS_SIGNAL; | 
|  |  | 
|  | if (reg & 0x08) { | 
|  | *status |= FE_HAS_LOCK; | 
|  | *status |= FE_HAS_VITERBI; | 
|  | *status |= FE_HAS_SYNC; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tda10048_read_ber(struct dvb_frontend *fe, u32 *ber) | 
|  | { | 
|  | struct tda10048_state *state = fe->demodulator_priv; | 
|  | static u32 cber_current; | 
|  | u32 cber_nmax; | 
|  | u64 cber_tmp; | 
|  |  | 
|  | dprintk(1, "%s()\n", __func__); | 
|  |  | 
|  | /* update cber on interrupt */ | 
|  | if (tda10048_readreg(state, TDA10048_SOFT_IT_C3) & 0x01) { | 
|  | cber_tmp = tda10048_readreg(state, TDA10048_CBER_MSB) << 8 | | 
|  | tda10048_readreg(state, TDA10048_CBER_LSB); | 
|  | cber_nmax = tda10048_readreg(state, TDA10048_CBER_NMAX_MSB) << 8 | | 
|  | tda10048_readreg(state, TDA10048_CBER_NMAX_LSB); | 
|  | cber_tmp *= 100000000; | 
|  | cber_tmp *= 2; | 
|  | cber_tmp = div_u64(cber_tmp, (cber_nmax * 32) + 1); | 
|  | cber_current = (u32)cber_tmp; | 
|  | /* retrigger cber acquisition */ | 
|  | tda10048_writereg(state, TDA10048_CVBER_CTRL, 0x39); | 
|  | } | 
|  | /* actual cber is (*ber)/1e8 */ | 
|  | *ber = cber_current; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tda10048_read_signal_strength(struct dvb_frontend *fe, | 
|  | u16 *signal_strength) | 
|  | { | 
|  | struct tda10048_state *state = fe->demodulator_priv; | 
|  | u8 v; | 
|  |  | 
|  | dprintk(1, "%s()\n", __func__); | 
|  |  | 
|  | *signal_strength = 65535; | 
|  |  | 
|  | v = tda10048_readreg(state, TDA10048_NP_OUT); | 
|  | if (v > 0) | 
|  | *signal_strength -= (v << 8) | v; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* SNR lookup table */ | 
|  | static struct snr_tab { | 
|  | u8 val; | 
|  | u8 data; | 
|  | } snr_tab[] = { | 
|  | {   0,   0 }, | 
|  | {   1, 246 }, | 
|  | {   2, 215 }, | 
|  | {   3, 198 }, | 
|  | {   4, 185 }, | 
|  | {   5, 176 }, | 
|  | {   6, 168 }, | 
|  | {   7, 161 }, | 
|  | {   8, 155 }, | 
|  | {   9, 150 }, | 
|  | {  10, 146 }, | 
|  | {  11, 141 }, | 
|  | {  12, 138 }, | 
|  | {  13, 134 }, | 
|  | {  14, 131 }, | 
|  | {  15, 128 }, | 
|  | {  16, 125 }, | 
|  | {  17, 122 }, | 
|  | {  18, 120 }, | 
|  | {  19, 118 }, | 
|  | {  20, 115 }, | 
|  | {  21, 113 }, | 
|  | {  22, 111 }, | 
|  | {  23, 109 }, | 
|  | {  24, 107 }, | 
|  | {  25, 106 }, | 
|  | {  26, 104 }, | 
|  | {  27, 102 }, | 
|  | {  28, 101 }, | 
|  | {  29,  99 }, | 
|  | {  30,  98 }, | 
|  | {  31,  96 }, | 
|  | {  32,  95 }, | 
|  | {  33,  94 }, | 
|  | {  34,  92 }, | 
|  | {  35,  91 }, | 
|  | {  36,  90 }, | 
|  | {  37,  89 }, | 
|  | {  38,  88 }, | 
|  | {  39,  86 }, | 
|  | {  40,  85 }, | 
|  | {  41,  84 }, | 
|  | {  42,  83 }, | 
|  | {  43,  82 }, | 
|  | {  44,  81 }, | 
|  | {  45,  80 }, | 
|  | {  46,  79 }, | 
|  | {  47,  78 }, | 
|  | {  48,  77 }, | 
|  | {  49,  76 }, | 
|  | {  50,  76 }, | 
|  | {  51,  75 }, | 
|  | {  52,  74 }, | 
|  | {  53,  73 }, | 
|  | {  54,  72 }, | 
|  | {  56,  71 }, | 
|  | {  57,  70 }, | 
|  | {  58,  69 }, | 
|  | {  60,  68 }, | 
|  | {  61,  67 }, | 
|  | {  63,  66 }, | 
|  | {  64,  65 }, | 
|  | {  66,  64 }, | 
|  | {  67,  63 }, | 
|  | {  68,  62 }, | 
|  | {  69,  62 }, | 
|  | {  70,  61 }, | 
|  | {  72,  60 }, | 
|  | {  74,  59 }, | 
|  | {  75,  58 }, | 
|  | {  77,  57 }, | 
|  | {  79,  56 }, | 
|  | {  81,  55 }, | 
|  | {  83,  54 }, | 
|  | {  85,  53 }, | 
|  | {  87,  52 }, | 
|  | {  89,  51 }, | 
|  | {  91,  50 }, | 
|  | {  93,  49 }, | 
|  | {  95,  48 }, | 
|  | {  97,  47 }, | 
|  | { 100,  46 }, | 
|  | { 102,  45 }, | 
|  | { 104,  44 }, | 
|  | { 107,  43 }, | 
|  | { 109,  42 }, | 
|  | { 112,  41 }, | 
|  | { 114,  40 }, | 
|  | { 117,  39 }, | 
|  | { 120,  38 }, | 
|  | { 123,  37 }, | 
|  | { 125,  36 }, | 
|  | { 128,  35 }, | 
|  | { 131,  34 }, | 
|  | { 134,  33 }, | 
|  | { 138,  32 }, | 
|  | { 141,  31 }, | 
|  | { 144,  30 }, | 
|  | { 147,  29 }, | 
|  | { 151,  28 }, | 
|  | { 154,  27 }, | 
|  | { 158,  26 }, | 
|  | { 162,  25 }, | 
|  | { 165,  24 }, | 
|  | { 169,  23 }, | 
|  | { 173,  22 }, | 
|  | { 177,  21 }, | 
|  | { 181,  20 }, | 
|  | { 186,  19 }, | 
|  | { 190,  18 }, | 
|  | { 194,  17 }, | 
|  | { 199,  16 }, | 
|  | { 204,  15 }, | 
|  | { 208,  14 }, | 
|  | { 213,  13 }, | 
|  | { 218,  12 }, | 
|  | { 223,  11 }, | 
|  | { 229,  10 }, | 
|  | { 234,   9 }, | 
|  | { 239,   8 }, | 
|  | { 245,   7 }, | 
|  | { 251,   6 }, | 
|  | { 255,   5 }, | 
|  | }; | 
|  |  | 
|  | static int tda10048_read_snr(struct dvb_frontend *fe, u16 *snr) | 
|  | { | 
|  | struct tda10048_state *state = fe->demodulator_priv; | 
|  | u8 v; | 
|  | int i, ret = -EINVAL; | 
|  |  | 
|  | dprintk(1, "%s()\n", __func__); | 
|  |  | 
|  | v = tda10048_readreg(state, TDA10048_NP_OUT); | 
|  | for (i = 0; i < ARRAY_SIZE(snr_tab); i++) { | 
|  | if (v <= snr_tab[i].val) { | 
|  | *snr = snr_tab[i].data; | 
|  | ret = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int tda10048_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) | 
|  | { | 
|  | struct tda10048_state *state = fe->demodulator_priv; | 
|  |  | 
|  | dprintk(1, "%s()\n", __func__); | 
|  |  | 
|  | *ucblocks = tda10048_readreg(state, TDA10048_UNCOR_CPT_MSB) << 8 | | 
|  | tda10048_readreg(state, TDA10048_UNCOR_CPT_LSB); | 
|  | /* clear the uncorrected TS packets counter when saturated */ | 
|  | if (*ucblocks == 0xFFFF) | 
|  | tda10048_writereg(state, TDA10048_UNCOR_CTRL, 0x80); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int tda10048_get_frontend(struct dvb_frontend *fe, | 
|  | struct dvb_frontend_parameters *p) | 
|  | { | 
|  | struct tda10048_state *state = fe->demodulator_priv; | 
|  |  | 
|  | dprintk(1, "%s()\n", __func__); | 
|  |  | 
|  | p->inversion = tda10048_readreg(state, TDA10048_CONF_C1_1) | 
|  | & 0x20 ? INVERSION_ON : INVERSION_OFF; | 
|  |  | 
|  | return tda10048_get_tps(state, &p->u.ofdm); | 
|  | } | 
|  |  | 
|  | static int tda10048_get_tune_settings(struct dvb_frontend *fe, | 
|  | struct dvb_frontend_tune_settings *tune) | 
|  | { | 
|  | tune->min_delay_ms = 1000; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void tda10048_release(struct dvb_frontend *fe) | 
|  | { | 
|  | struct tda10048_state *state = fe->demodulator_priv; | 
|  | dprintk(1, "%s()\n", __func__); | 
|  | kfree(state); | 
|  | } | 
|  |  | 
|  | static void tda10048_establish_defaults(struct dvb_frontend *fe) | 
|  | { | 
|  | struct tda10048_state *state = fe->demodulator_priv; | 
|  | struct tda10048_config *config = &state->config; | 
|  |  | 
|  | /* Validate/default the config */ | 
|  | if (config->dtv6_if_freq_khz == 0) { | 
|  | config->dtv6_if_freq_khz = TDA10048_IF_4300; | 
|  | printk(KERN_WARNING "%s() tda10048_config.dtv6_if_freq_khz " | 
|  | "is not set (defaulting to %d)\n", | 
|  | __func__, | 
|  | config->dtv6_if_freq_khz); | 
|  | } | 
|  |  | 
|  | if (config->dtv7_if_freq_khz == 0) { | 
|  | config->dtv7_if_freq_khz = TDA10048_IF_4300; | 
|  | printk(KERN_WARNING "%s() tda10048_config.dtv7_if_freq_khz " | 
|  | "is not set (defaulting to %d)\n", | 
|  | __func__, | 
|  | config->dtv7_if_freq_khz); | 
|  | } | 
|  |  | 
|  | if (config->dtv8_if_freq_khz == 0) { | 
|  | config->dtv8_if_freq_khz = TDA10048_IF_4300; | 
|  | printk(KERN_WARNING "%s() tda10048_config.dtv8_if_freq_khz " | 
|  | "is not set (defaulting to %d)\n", | 
|  | __func__, | 
|  | config->dtv8_if_freq_khz); | 
|  | } | 
|  |  | 
|  | if (config->clk_freq_khz == 0) { | 
|  | config->clk_freq_khz = TDA10048_CLK_16000; | 
|  | printk(KERN_WARNING "%s() tda10048_config.clk_freq_khz " | 
|  | "is not set (defaulting to %d)\n", | 
|  | __func__, | 
|  | config->clk_freq_khz); | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct dvb_frontend_ops tda10048_ops; | 
|  |  | 
|  | struct dvb_frontend *tda10048_attach(const struct tda10048_config *config, | 
|  | struct i2c_adapter *i2c) | 
|  | { | 
|  | struct tda10048_state *state = NULL; | 
|  |  | 
|  | dprintk(1, "%s()\n", __func__); | 
|  |  | 
|  | /* allocate memory for the internal state */ | 
|  | state = kzalloc(sizeof(struct tda10048_state), GFP_KERNEL); | 
|  | if (state == NULL) | 
|  | goto error; | 
|  |  | 
|  | /* setup the state and clone the config */ | 
|  | memcpy(&state->config, config, sizeof(*config)); | 
|  | state->i2c = i2c; | 
|  | state->fwloaded = 0; | 
|  | state->bandwidth = BANDWIDTH_8_MHZ; | 
|  |  | 
|  | /* check if the demod is present */ | 
|  | if (tda10048_readreg(state, TDA10048_IDENTITY) != 0x048) | 
|  | goto error; | 
|  |  | 
|  | /* create dvb_frontend */ | 
|  | memcpy(&state->frontend.ops, &tda10048_ops, | 
|  | sizeof(struct dvb_frontend_ops)); | 
|  | state->frontend.demodulator_priv = state; | 
|  |  | 
|  | /* Establish any defaults the the user didn't pass */ | 
|  | tda10048_establish_defaults(&state->frontend); | 
|  |  | 
|  | /* Set the xtal and freq defaults */ | 
|  | if (tda10048_set_if(&state->frontend, BANDWIDTH_8_MHZ) != 0) | 
|  | goto error; | 
|  |  | 
|  | /* Default bandwidth */ | 
|  | if (tda10048_set_bandwidth(&state->frontend, BANDWIDTH_8_MHZ) != 0) | 
|  | goto error; | 
|  |  | 
|  | /* Leave the gate closed */ | 
|  | tda10048_i2c_gate_ctrl(&state->frontend, 0); | 
|  |  | 
|  | return &state->frontend; | 
|  |  | 
|  | error: | 
|  | kfree(state); | 
|  | return NULL; | 
|  | } | 
|  | EXPORT_SYMBOL(tda10048_attach); | 
|  |  | 
|  | static struct dvb_frontend_ops tda10048_ops = { | 
|  |  | 
|  | .info = { | 
|  | .name			= "NXP TDA10048HN DVB-T", | 
|  | .type			= FE_OFDM, | 
|  | .frequency_min		= 177000000, | 
|  | .frequency_max		= 858000000, | 
|  | .frequency_stepsize	= 166666, | 
|  | .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | | 
|  | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | | 
|  | FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | | 
|  | FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | | 
|  | FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER | 
|  | }, | 
|  |  | 
|  | .release = tda10048_release, | 
|  | .init = tda10048_init, | 
|  | .i2c_gate_ctrl = tda10048_i2c_gate_ctrl, | 
|  | .set_frontend = tda10048_set_frontend, | 
|  | .get_frontend = tda10048_get_frontend, | 
|  | .get_tune_settings = tda10048_get_tune_settings, | 
|  | .read_status = tda10048_read_status, | 
|  | .read_ber = tda10048_read_ber, | 
|  | .read_signal_strength = tda10048_read_signal_strength, | 
|  | .read_snr = tda10048_read_snr, | 
|  | .read_ucblocks = tda10048_read_ucblocks, | 
|  | }; | 
|  |  | 
|  | module_param(debug, int, 0644); | 
|  | MODULE_PARM_DESC(debug, "Enable verbose debug messages"); | 
|  |  | 
|  | MODULE_DESCRIPTION("NXP TDA10048HN DVB-T Demodulator driver"); | 
|  | MODULE_AUTHOR("Steven Toth"); | 
|  | MODULE_LICENSE("GPL"); |