pcmcia: deprecate CS_SUCCESS
Instead of using own error or success codes, the PCMCIA code should rely on
the generic return values. Therefore, replace all occurrences of CS_SUCCESS
with 0.
CC: netdev@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 7112fd5..08c4dd8 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -355,9 +355,10 @@
for (i = j = 0; j < 0x400; j += 0x20) {
link->io.BasePort1 = j ^ 0x300;
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
+ if (i == 0)
+ break;
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIO, i);
goto failed;
}
@@ -377,7 +378,7 @@
tuple.TupleDataMax = 64;
tuple.TupleOffset = 0;
tuple.DesiredTuple = 0x88;
- if (pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) {
+ if (pcmcia_get_first_tuple(link, &tuple) == 0) {
pcmcia_get_tuple_data(link, &tuple);
for (i = 0; i < 3; i++)
phys_addr[i] = htons(le16_to_cpu(buf[i]));
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 549a645..0b28d0d 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -278,9 +278,10 @@
if (multi && (j & 0x80)) continue;
link->io.BasePort1 = j ^ 0x300;
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
+ if (i == 0)
+ break;
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIO, i);
goto failed;
}
@@ -295,7 +296,7 @@
/* The 3c589 has an extra EEPROM for configuration info, including
the hardware address. The 3c562 puts the address in the CIS. */
tuple.DesiredTuple = 0x88;
- if (pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) {
+ if (pcmcia_get_first_tuple(link, &tuple) == 0) {
pcmcia_get_tuple_data(link, &tuple);
for (i = 0; i < 3; i++)
phys_addr[i] = htons(le16_to_cpu(buf[i]));
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 061d889..0bc641a 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -262,7 +262,7 @@
if (link->io.NumPorts2 > 0) {
/* for master/slave multifunction cards */
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
- link->irq.Attributes =
+ link->irq.Attributes =
IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED;
}
} else {
@@ -276,7 +276,8 @@
link->io.BasePort1 = j ^ 0x300;
link->io.BasePort2 = (j ^ 0x300) + 0x10;
ret = pcmcia_request_io(link, &link->io);
- if (ret == CS_SUCCESS) return ret;
+ if (ret == 0)
+ return ret;
}
return ret;
} else {
@@ -327,7 +328,7 @@
/* don't trust the CIS on this; Linksys got it wrong */
link->conf.Present = 0x63;
last_ret = pcmcia_loop_config(link, axnet_configcheck, NULL);
- if (last_ret != CS_SUCCESS) {
+ if (last_ret != 0) {
cs_error(link, RequestIO, last_ret);
goto failed;
}
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index ea9414c..831090c 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -260,21 +260,21 @@
DEBUG(0, "com20020_config(0x%p)\n", link);
DEBUG(1,"arcnet: baseport1 is %Xh\n", link->io.BasePort1);
- i = !CS_SUCCESS;
+ i = -ENODEV;
if (!link->io.BasePort1)
{
for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
{
link->io.BasePort1 = ioaddr;
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
+ if (i == 0)
break;
}
}
else
i = pcmcia_request_io(link, &link->io);
- if (i != CS_SUCCESS)
+ if (i != 0)
{
DEBUG(1,"arcnet: requestIO failed totally!\n");
goto failed;
@@ -287,7 +287,7 @@
link->irq.AssignedIRQ,
link->irq.IRQInfo1, link->irq.IRQInfo2);
i = pcmcia_request_irq(link, &link->irq);
- if (i != CS_SUCCESS)
+ if (i != 0)
{
DEBUG(1,"arcnet: requestIRQ failed totally!\n");
goto failed;
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index a550c9b..0ffd981 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -309,7 +309,8 @@
printk(KERN_NOTICE "fmvj18x_cs: out of resource for serial\n");
}
ret = pcmcia_request_io(link, &link->io);
- if (ret == CS_SUCCESS) return ret;
+ if (ret == 0)
+ return ret;
}
return ret;
}
@@ -325,7 +326,7 @@
for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) {
link->io.BasePort1 = ioaddr;
ret = pcmcia_request_io(link, &link->io);
- if (ret == CS_SUCCESS) {
+ if (ret == 0) {
/* calculate ConfigIndex value */
link->conf.ConfigIndex =
((link->io.BasePort1 & 0x0f0) >> 3) | 0x22;
@@ -356,7 +357,7 @@
tuple.TupleOffset = 0;
tuple.DesiredTuple = CISTPL_FUNCE;
tuple.TupleOffset = 0;
- if (pcmcia_get_first_tuple(link, &tuple) == CS_SUCCESS) {
+ if (pcmcia_get_first_tuple(link, &tuple) == 0) {
/* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
@@ -430,10 +431,10 @@
link->irq.Attributes =
IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
ret = mfc_try_io_port(link);
- if (ret != CS_SUCCESS) goto cs_failed;
+ if (ret != 0) goto cs_failed;
} else if (cardtype == UNGERMANN) {
ret = ungermann_try_io_port(link);
- if (ret != CS_SUCCESS) goto cs_failed;
+ if (ret != 0) goto cs_failed;
} else {
CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
}
@@ -565,7 +566,7 @@
req.Base = 0; req.Size = 0;
req.AccessSpeed = 0;
i = pcmcia_request_window(&link, &req, &link->win);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestWindow, i);
return -1;
}
@@ -599,7 +600,7 @@
iounmap(base);
j = pcmcia_release_window(link->win);
- if (j != CS_SUCCESS)
+ if (j != 0)
cs_error(link, ReleaseWindow, j);
return (i != 0x200) ? 0 : -1;
@@ -620,7 +621,7 @@
req.Base = 0; req.Size = 0;
req.AccessSpeed = 0;
i = pcmcia_request_window(&link, &req, &link->win);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestWindow, i);
return -1;
}
@@ -642,7 +643,7 @@
iounmap(base);
j = pcmcia_release_window(link->win);
- if (j != CS_SUCCESS)
+ if (j != 0)
cs_error(link, ReleaseWindow, j);
return 0;
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index 4eafa4f..cf3cca4 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -238,7 +238,7 @@
/* Try PRIMARY card at 0xA20-0xA23 */
link->io.BasePort1 = 0xA20;
i = pcmcia_request_io(link, &link->io);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
/* Couldn't get 0xA20-0xA23. Try ALTERNATE at 0xA24-0xA27. */
link->io.BasePort1 = 0xA24;
CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index aa17434..1758952 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -310,7 +310,7 @@
req.Base = 0; req.Size = 0;
req.AccessSpeed = 0;
i = pcmcia_request_window(&link, &req, &link->win);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestWindow, i);
return NULL;
}
@@ -333,7 +333,7 @@
iounmap(virt);
j = pcmcia_release_window(link->win);
- if (j != CS_SUCCESS)
+ if (j != 0)
cs_error(link, ReleaseWindow, j);
return (i < NR_INFO) ? hw_info+i : NULL;
} /* get_hwinfo */
@@ -504,7 +504,8 @@
link->io.BasePort1 = j ^ 0x300;
link->io.BasePort2 = (j ^ 0x300) + 0x10;
ret = pcmcia_request_io(link, &link->io);
- if (ret == CS_SUCCESS) return ret;
+ if (ret == 0)
+ return ret;
}
return ret;
} else {
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index b3f2085..267cbe0a 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -409,8 +409,11 @@
{
int i;
- if ((i = pcmcia_get_first_tuple(handle, tuple)) != CS_SUCCESS ||
- (i = pcmcia_get_tuple_data(handle, tuple)) != CS_SUCCESS)
+ i = pcmcia_get_first_tuple(handle, tuple);
+ if (i != 0)
+ return i;
+ i = pcmcia_get_tuple_data(handle, tuple);
+ if (i != 0)
return i;
return pcmcia_parse_tuple(handle, tuple, parse);
}
@@ -420,8 +423,8 @@
{
int i;
- if ((i = pcmcia_get_next_tuple(handle, tuple)) != CS_SUCCESS ||
- (i = pcmcia_get_tuple_data(handle, tuple)) != CS_SUCCESS)
+ if ((i = pcmcia_get_next_tuple(handle, tuple)) != 0 ||
+ (i = pcmcia_get_tuple_data(handle, tuple)) != 0)
return i;
return pcmcia_parse_tuple(handle, tuple, parse);
}
@@ -509,7 +512,7 @@
req.Base = req.Size = 0;
req.AccessSpeed = 0;
i = pcmcia_request_window(&link, &req, &link->win);
- if (i != CS_SUCCESS)
+ if (i != 0)
goto free_cfg_mem;
smc->base = ioremap(req.Base, req.Size);
mem.CardOffset = mem.Page = 0;
@@ -517,7 +520,7 @@
mem.CardOffset = link->conf.ConfigBase;
i = pcmcia_map_mem_page(link->win, &mem);
- if ((i == CS_SUCCESS)
+ if ((i == 0)
&& (smc->manfid == MANFID_MEGAHERTZ)
&& (smc->cardid == PRODID_MEGAHERTZ_EM3288))
mhz_3288_power(link);
@@ -551,12 +554,12 @@
/* Read the station address from the CIS. It is stored as the last
(fourth) string in the Version 1 Version/ID tuple. */
tuple->DesiredTuple = CISTPL_VERS_1;
- if (first_tuple(link, tuple, parse) != CS_SUCCESS) {
+ if (first_tuple(link, tuple, parse) != 0) {
rc = -1;
goto free_cfg_mem;
}
/* Ugh -- the EM1144 card has two VERS_1 tuples!?! */
- if (next_tuple(link, tuple, parse) != CS_SUCCESS)
+ if (next_tuple(link, tuple, parse) != 0)
first_tuple(link, tuple, parse);
if (parse->version_1.ns > 3) {
station_addr = parse->version_1.str + parse->version_1.ofs[3];
@@ -568,11 +571,11 @@
/* Another possibility: for the EM3288, in a special tuple */
tuple->DesiredTuple = 0x81;
- if (pcmcia_get_first_tuple(link, tuple) != CS_SUCCESS) {
+ if (pcmcia_get_first_tuple(link, tuple) != 0) {
rc = -1;
goto free_cfg_mem;
}
- if (pcmcia_get_tuple_data(link, tuple) != CS_SUCCESS) {
+ if (pcmcia_get_tuple_data(link, tuple) != 0) {
rc = -1;
goto free_cfg_mem;
}
@@ -700,12 +703,12 @@
/* Check for a LAN function extension tuple */
tuple->DesiredTuple = CISTPL_FUNCE;
i = first_tuple(link, tuple, parse);
- while (i == CS_SUCCESS) {
+ while (i == 0) {
if (parse->funce.type == CISTPL_FUNCE_LAN_NODE_ID)
break;
i = next_tuple(link, tuple, parse);
}
- if (i == CS_SUCCESS) {
+ if (i == 0) {
node_id = (cistpl_lan_node_id_t *)parse->funce.data;
if (node_id->nb == 6) {
for (i = 0; i < 6; i++)
@@ -752,9 +755,10 @@
for (i = j = 0; j < 4; j++) {
link->io.BasePort2 = com[j];
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
+ if (i == 0)
+ break;
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
/* Fallback: turn off hard decode */
link->conf.ConfigIndex = 0x03;
link->io.NumPorts2 = 0;
@@ -787,13 +791,13 @@
/* Read the station address from tuple 0x90, subtuple 0x04 */
tuple->DesiredTuple = 0x90;
i = pcmcia_get_first_tuple(link, tuple);
- while (i == CS_SUCCESS) {
+ while (i == 0) {
i = pcmcia_get_tuple_data(link, tuple);
- if ((i != CS_SUCCESS) || (buf[0] == 0x04))
+ if ((i != 0) || (buf[0] == 0x04))
break;
i = pcmcia_get_next_tuple(link, tuple);
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
rc = -1;
goto free_cfg_mem;
}
@@ -931,8 +935,11 @@
======================================================================*/
-#define CS_EXIT_TEST(ret, svc, label) \
-if (ret != CS_SUCCESS) { cs_error(link, svc, ret); goto label; }
+#define CS_EXIT_TEST(ret, svc, label) \
+if (ret != 0) { \
+ cs_error(link, svc, ret); \
+ goto label; \
+}
static int smc91c92_config(struct pcmcia_device *link)
{
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index b8aa163..ab42fb6 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -82,13 +82,13 @@
tuple.TupleOffset = 0;
res = pcmcia_get_first_tuple(dev, &tuple);
- if (res != CS_SUCCESS)
+ if (res != 0)
goto err_kfree_ssb;
res = pcmcia_get_tuple_data(dev, &tuple);
- if (res != CS_SUCCESS)
+ if (res != 0)
goto err_kfree_ssb;
res = pcmcia_parse_tuple(dev, &tuple, &parse);
- if (res != CS_SUCCESS)
+ if (res != 0)
goto err_kfree_ssb;
dev->conf.ConfigBase = parse.config.base;
@@ -107,13 +107,13 @@
win.Size = SSB_CORE_SIZE;
win.AccessSpeed = 250;
res = pcmcia_request_window(&dev, &win, &dev->win);
- if (res != CS_SUCCESS)
+ if (res != 0)
goto err_kfree_ssb;
mem.CardOffset = 0;
mem.Page = 0;
res = pcmcia_map_mem_page(dev->win, &mem);
- if (res != CS_SUCCESS)
+ if (res != 0)
goto err_disable;
dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
@@ -121,11 +121,11 @@
dev->irq.Handler = NULL; /* The handler is registered later. */
dev->irq.Instance = NULL;
res = pcmcia_request_irq(dev, &dev->irq);
- if (res != CS_SUCCESS)
+ if (res != 0)
goto err_disable;
res = pcmcia_request_configuration(dev, &dev->conf);
- if (res != CS_SUCCESS)
+ if (res != 0)
goto err_disable;
err = ssb_bus_pcmciabus_register(ssb, dev, win.Base);
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index c768d42..2826e67 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -234,7 +234,7 @@
reg.Value = hw_priv->link->io.BasePort1 & 0x00ff;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -"
" res=%d\n", res);
}
@@ -246,7 +246,7 @@
reg.Value = (hw_priv->link->io.BasePort1 & 0xff00) >> 8;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -"
" res=%d\n", res);
}
@@ -322,7 +322,7 @@
reg.Value = COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
goto done;
@@ -339,7 +339,7 @@
reg.Value = COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE | COR_FUNC_ENA;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
dev->name, res);
goto done;
@@ -374,7 +374,7 @@
reg.Value = 0;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n",
res);
return;
@@ -386,7 +386,7 @@
reg.Value |= COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n",
res);
return;
@@ -399,7 +399,7 @@
reg.Value |= COR_IREQ_ENA;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n",
res);
return;
@@ -433,7 +433,7 @@
reg.Value = 0;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 1 "
"(%d)\n", res);
return;
@@ -446,7 +446,7 @@
reg.Value |= COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 2 "
"(%d)\n", res);
return;
@@ -460,7 +460,7 @@
reg.Offset = CISREG_CCSR;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 3 "
"(%d)\n", res);
return;
@@ -472,7 +472,7 @@
reg.Value = old_cor & ~COR_SOFT_RESET;
res = pcmcia_access_configuration_register(hw_priv->link,
®);
- if (res != CS_SUCCESS) {
+ if (res != 0) {
printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 4 "
"(%d)\n", res);
return;
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index f479c1a..bf2dd10 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -749,9 +749,10 @@
for (i = j = 0x0; j < 0x400; j += 0x20) {
link->io.BasePort1 = j ^ 0x300;
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS) break;
+ if (i == 0)
+ break;
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIO, i);
goto failed;
}
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 963960d..99c7c8b 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -798,9 +798,9 @@
iounmap(local->amem);
/* Do bother checking to see if these succeed or not */
i = pcmcia_release_window(local->amem_handle);
- if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseWindow(local->amem) ret = %x\n",i);
+ if ( i != 0 ) DEBUG(0,"ReleaseWindow(local->amem) ret = %x\n",i);
i = pcmcia_release_window(local->rmem_handle);
- if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseWindow(local->rmem) ret = %x\n",i);
+ if ( i != 0 ) DEBUG(0,"ReleaseWindow(local->rmem) ret = %x\n",i);
pcmcia_disable_device(link);
DEBUG(2,"ray_release ending\n");
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index b584c0e..fee9a02 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -3708,7 +3708,7 @@
#endif
i = pcmcia_access_configuration_register(link, ®);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, AccessConfigurationRegister, i);
return FALSE;
@@ -3722,7 +3722,7 @@
reg.Action = CS_WRITE;
reg.Value = reg.Value | COR_SW_RESET;
i = pcmcia_access_configuration_register(link, ®);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, AccessConfigurationRegister, i);
return FALSE;
@@ -3731,7 +3731,7 @@
reg.Action = CS_WRITE;
reg.Value = COR_LEVEL_IRQ | COR_CONFIG;
i = pcmcia_access_configuration_register(link, ®);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, AccessConfigurationRegister, i);
return FALSE;
@@ -3909,7 +3909,7 @@
do
{
i = pcmcia_request_io(link, &link->io);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, RequestIO, i);
break;
@@ -3920,7 +3920,7 @@
* actually assign a handler to the interrupt.
*/
i = pcmcia_request_irq(link, &link->irq);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, RequestIRQ, i);
break;
@@ -3932,7 +3932,7 @@
*/
link->conf.ConfigIndex = 1;
i = pcmcia_request_configuration(link, &link->conf);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, RequestConfiguration, i);
break;
@@ -3948,7 +3948,7 @@
req.Base = req.Size = 0;
req.AccessSpeed = mem_speed;
i = pcmcia_request_window(&link, &req, &link->win);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, RequestWindow, i);
break;
@@ -3960,7 +3960,7 @@
mem.CardOffset = 0; mem.Page = 0;
i = pcmcia_map_mem_page(link->win, &mem);
- if(i != CS_SUCCESS)
+ if (i != 0)
{
cs_error(link, MapMemPage, i);
break;
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 3771419..969f53f 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1977,10 +1977,10 @@
link->io.BasePort1 = j;
link->io.BasePort2 = link->io.BasePort1 + 0x10;
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
+ if (i == 0)
break;
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIO, i);
goto failed;
}