iwlagn: remove indirection for iwlagn_hw_valid_rtc_data_addr
Not needed since the driver split.
Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index e21f718..fe15a46 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -170,7 +170,6 @@
.set_hw_params = iwl1000_hw_set_hw_params,
.rx_handler_setup = iwlagn_rx_handler_setup,
.setup_deferred_work = iwlagn_setup_deferred_work,
- .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.nic_config = iwl1000_nic_config,
.eeprom_ops = {
.regulatory_bands = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-2000.c b/drivers/net/wireless/iwlwifi/iwl-2000.c
index 68ee25b..7e0f766 100644
--- a/drivers/net/wireless/iwlwifi/iwl-2000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-2000.c
@@ -169,7 +169,6 @@
.set_hw_params = iwl2000_hw_set_hw_params,
.rx_handler_setup = iwlagn_rx_handler_setup,
.setup_deferred_work = iwlagn_setup_deferred_work,
- .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.nic_config = iwl2000_nic_config,
.eeprom_ops = {
.regulatory_bands = {
@@ -191,7 +190,6 @@
.rx_handler_setup = iwlagn_bt_rx_handler_setup,
.setup_deferred_work = iwlagn_bt_setup_deferred_work,
.cancel_deferred_work = iwlagn_bt_cancel_deferred_work,
- .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.nic_config = iwl2000_nic_config,
.eeprom_ops = {
.regulatory_bands = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 33b383c..e090878 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -322,7 +322,6 @@
.set_hw_params = iwl5000_hw_set_hw_params,
.rx_handler_setup = iwlagn_rx_handler_setup,
.setup_deferred_work = iwlagn_setup_deferred_work,
- .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.set_channel_switch = iwl5000_hw_channel_switch,
.nic_config = iwl5000_nic_config,
.eeprom_ops = {
@@ -343,7 +342,6 @@
.set_hw_params = iwl5150_hw_set_hw_params,
.rx_handler_setup = iwlagn_rx_handler_setup,
.setup_deferred_work = iwlagn_setup_deferred_work,
- .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.set_channel_switch = iwl5000_hw_channel_switch,
.nic_config = iwl5000_nic_config,
.eeprom_ops = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index cffff09..3b2d753 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -260,7 +260,6 @@
.set_hw_params = iwl6000_hw_set_hw_params,
.rx_handler_setup = iwlagn_rx_handler_setup,
.setup_deferred_work = iwlagn_setup_deferred_work,
- .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.set_channel_switch = iwl6000_hw_channel_switch,
.nic_config = iwl6000_nic_config,
.eeprom_ops = {
@@ -283,7 +282,6 @@
.rx_handler_setup = iwlagn_bt_rx_handler_setup,
.setup_deferred_work = iwlagn_bt_setup_deferred_work,
.cancel_deferred_work = iwlagn_bt_cancel_deferred_work,
- .is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
.set_channel_switch = iwl6000_hw_channel_switch,
.nic_config = iwl6000_nic_config,
.eeprom_ops = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 41c3e15..c2a1241 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -375,7 +375,7 @@
u32 next_entry; /* index of next entry to be written by uCode */
base = priv->device_pointers.error_event_table;
- if (priv->cfg->lib->is_valid_rtc_data_addr(base)) {
+ if (iwlagn_hw_valid_rtc_data_addr(base)) {
capacity = iwl_read_targ_mem(priv, base);
num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
@@ -1614,7 +1614,7 @@
base = priv->_agn.inst_errlog_ptr;
}
- if (!priv->cfg->lib->is_valid_rtc_data_addr(base)) {
+ if (!iwlagn_hw_valid_rtc_data_addr(base)) {
IWL_ERR(priv,
"Not valid error log pointer 0x%08X for %s uCode\n",
base,
@@ -1805,7 +1805,7 @@
base = priv->_agn.inst_evtlog_ptr;
}
- if (!priv->cfg->lib->is_valid_rtc_data_addr(base)) {
+ if (!iwlagn_hw_valid_rtc_data_addr(base)) {
IWL_ERR(priv,
"Invalid event log pointer 0x%08X for %s uCode\n",
base,
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 5187318..2318052 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -89,8 +89,6 @@
void (*setup_deferred_work)(struct iwl_priv *priv);
/* cancel deferred work */
void (*cancel_deferred_work)(struct iwl_priv *priv);
- /* check validity of rtc data address */
- int (*is_valid_rtc_data_addr)(u32 addr);
int (*set_channel_switch)(struct iwl_priv *priv,
struct ieee80211_channel_switch *ch_switch);
/* device specific configuration */