ide: make drive->id an union (take 2)
Make drive->id an unnamed union so id can be accessed either by using
'u16 *id' or 'struct hd_driveid *driveid'. Then convert all existing
drive->id users accordingly (using 'u16 *id' when possible).
This is an intermediate step to make ide 'struct hd_driveid'-free.
While at it:
- Add missing KERN_CONTs in it821x.c.
- Use ATA_ID_WORDS and ATA_ID_*_LEN defines.
- Remove unnecessary checks for drive->id.
- s/drive_table/table/ in ide_in_drive_list().
- Cleanup ide_config_drive_speed() a bit.
- s/drive1/dev1/ & s/drive0/dev0/ in ide_undecoded_slave().
v2:
Fix typo in drivers/ide/ppc/pmac.c. (From Stephen Rothwell)
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index e9034c0..67f93a4 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -965,12 +965,12 @@
* Check whether we can support a drive, based on the ATAPI IDENTIFY command
* results.
*/
-static int idefloppy_identify_device(ide_drive_t *drive, struct hd_driveid *id)
+static int idefloppy_identify_device(ide_drive_t *drive, u16 *id)
{
u8 gcw[2];
u8 device_type, protocol, removable, drq_type, packet_size;
- *((u16 *) &gcw) = id->config;
+ *((u16 *)&gcw) = id[ATA_ID_CONFIG];
device_type = gcw[1] & 0x1F;
removable = (gcw[0] & 0x80) >> 7;
@@ -981,7 +981,8 @@
#ifdef CONFIG_PPC
/* kludge for Apple PowerBook internal zip */
if (device_type == 5 &&
- !strstr(id->model, "CD-ROM") && strstr(id->model, "ZIP"))
+ !strstr((char *)&id[ATA_ID_PROD], "CD-ROM") &&
+ strstr((char *)&id[ATA_ID_PROD], "ZIP"))
device_type = 0;
#endif
@@ -1024,9 +1025,10 @@
static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
{
+ u16 *id = drive->id;
u8 gcw[2];
- *((u16 *) &gcw) = drive->id->config;
+ *((u16 *)&gcw) = id[ATA_ID_CONFIG];
floppy->pc = floppy->pc_stack;
drive->pc_callback = ide_floppy_callback;
@@ -1041,7 +1043,7 @@
* it. It should be fixed as of version 1.9, but to be on the safe side
* we'll leave the limitation below for the 2.2.x tree.
*/
- if (!strncmp(drive->id->model, "IOMEGA ZIP 100 ATAPI", 20)) {
+ if (!strncmp((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI", 20)) {
drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE;
/* This value will be visible in the /proc/ide/hdx/settings */
floppy->ticks = IDEFLOPPY_TICKS_DELAY;
@@ -1052,7 +1054,7 @@
* Guess what? The IOMEGA Clik! drive also needs the above fix. It makes
* nasty clicking noises without it, so please don't remove this.
*/
- if (strncmp(drive->id->model, "IOMEGA Clik!", 11) == 0) {
+ if (strncmp((char *)&id[ATA_ID_PROD], "IOMEGA Clik!", 11) == 0) {
blk_queue_max_sectors(drive->queue, 64);
drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE;
}