[media] dvb: Add support for pctv452e
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index 28fbb5c..4a2d2e6 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -607,6 +607,16 @@
help
An SEC control chips.
+config DVB_LNBP22
+ tristate "LNBP22 SEC controllers"
+ depends on DVB_CORE && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ LNB power supply and control voltage
+ regulator chip with step-up converter
+ and I2C interface.
+ Say Y when you want to support this chip.
+
config DVB_ISL6405
tristate "ISL6405 SEC controller"
depends on DVB_CORE && I2C
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 36c8d81..f639f67 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -52,6 +52,7 @@
obj-$(CONFIG_DVB_LGDT3305) += lgdt3305.o
obj-$(CONFIG_DVB_CX24123) += cx24123.o
obj-$(CONFIG_DVB_LNBP21) += lnbp21.o
+obj-$(CONFIG_DVB_LNBP22) += lnbp22.o
obj-$(CONFIG_DVB_ISL6405) += isl6405.o
obj-$(CONFIG_DVB_ISL6421) += isl6421.o
obj-$(CONFIG_DVB_TDA10086) += tda10086.o
diff --git a/drivers/media/dvb/frontends/lnbp22.c b/drivers/media/dvb/frontends/lnbp22.c
new file mode 100644
index 0000000..84ad039
--- /dev/null
+++ b/drivers/media/dvb/frontends/lnbp22.c
@@ -0,0 +1,148 @@
+/*
+ * lnbp22.h - driver for lnb supply and control ic lnbp22
+ *
+ * Copyright (C) 2006 Dominik Kuhlen
+ * Based on lnbp21 driver
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org
+ */
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
+#include "dvb_frontend.h"
+#include "lnbp22.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
+
+
+#define dprintk(lvl, arg...) if (debug >= (lvl)) printk(arg)
+
+struct lnbp22 {
+ u8 config[4];
+ struct i2c_adapter *i2c;
+};
+
+static int lnbp22_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ struct lnbp22 *lnbp22 = (struct lnbp22 *)fe->sec_priv;
+ struct i2c_msg msg = {
+ .addr = 0x08,
+ .flags = 0,
+ .buf = (char *)&lnbp22->config,
+ .len = sizeof(lnbp22->config),
+ };
+
+ dprintk(1, "%s: %d (18V=%d 13V=%d)\n", __func__, voltage,
+ SEC_VOLTAGE_18, SEC_VOLTAGE_13);
+
+ lnbp22->config[3] = 0x60; /* Power down */
+ switch (voltage) {
+ case SEC_VOLTAGE_OFF:
+ break;
+ case SEC_VOLTAGE_13:
+ lnbp22->config[3] |= LNBP22_EN;
+ break;
+ case SEC_VOLTAGE_18:
+ lnbp22->config[3] |= (LNBP22_EN | LNBP22_VSEL);
+ break;
+ default:
+ return -EINVAL;
+ };
+
+ dprintk(1, "%s: 0x%02x)\n", __func__, lnbp22->config[3]);
+ return (i2c_transfer(lnbp22->i2c, &msg, 1) == 1) ? 0 : -EIO;
+}
+
+static int lnbp22_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg)
+{
+ struct lnbp22 *lnbp22 = (struct lnbp22 *) fe->sec_priv;
+ struct i2c_msg msg = {
+ .addr = 0x08,
+ .flags = 0,
+ .buf = (char *)&lnbp22->config,
+ .len = sizeof(lnbp22->config),
+ };
+
+ dprintk(1, "%s: %d\n", __func__, (int)arg);
+ if (arg)
+ lnbp22->config[3] |= LNBP22_LLC;
+ else
+ lnbp22->config[3] &= ~LNBP22_LLC;
+
+ return (i2c_transfer(lnbp22->i2c, &msg, 1) == 1) ? 0 : -EIO;
+}
+
+static void lnbp22_release(struct dvb_frontend *fe)
+{
+ dprintk(1, "%s\n", __func__);
+ /* LNBP power off */
+ lnbp22_set_voltage(fe, SEC_VOLTAGE_OFF);
+
+ /* free data */
+ kfree(fe->sec_priv);
+ fe->sec_priv = NULL;
+}
+
+struct dvb_frontend *lnbp22_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c)
+{
+ struct lnbp22 *lnbp22 = kmalloc(sizeof(struct lnbp22), GFP_KERNEL);
+ if (!lnbp22)
+ return NULL;
+
+ /* default configuration */
+ lnbp22->config[0] = 0x00; /* ? */
+ lnbp22->config[1] = 0x28; /* ? */
+ lnbp22->config[2] = 0x48; /* ? */
+ lnbp22->config[3] = 0x60; /* Power down */
+ lnbp22->i2c = i2c;
+ fe->sec_priv = lnbp22;
+
+ /* detect if it is present or not */
+ if (lnbp22_set_voltage(fe, SEC_VOLTAGE_OFF)) {
+ dprintk(0, "%s LNBP22 not found\n", __func__);
+ kfree(lnbp22);
+ fe->sec_priv = NULL;
+ return NULL;
+ }
+
+ /* install release callback */
+ fe->ops.release_sec = lnbp22_release;
+
+ /* override frontend ops */
+ fe->ops.set_voltage = lnbp22_set_voltage;
+ fe->ops.enable_high_lnb_voltage = lnbp22_enable_high_lnb_voltage;
+
+ return fe;
+}
+EXPORT_SYMBOL(lnbp22_attach);
+
+MODULE_DESCRIPTION("Driver for lnb supply and control ic lnbp22");
+MODULE_AUTHOR("Dominik Kuhlen");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/lnbp22.h b/drivers/media/dvb/frontends/lnbp22.h
new file mode 100644
index 0000000..63e2dec
--- /dev/null
+++ b/drivers/media/dvb/frontends/lnbp22.h
@@ -0,0 +1,57 @@
+/*
+ * lnbp22.h - driver for lnb supply and control ic lnbp22
+ *
+ * Copyright (C) 2006 Dominik Kuhlen
+ * Based on lnbp21.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org
+ */
+
+#ifndef _LNBP22_H
+#define _LNBP22_H
+
+/* Enable */
+#define LNBP22_EN 0x10
+/* Voltage selection */
+#define LNBP22_VSEL 0x02
+/* Plus 1 Volt Bit */
+#define LNBP22_LLC 0x01
+
+#include <linux/dvb/frontend.h>
+
+#if defined(CONFIG_DVB_LNBP22) || \
+ (defined(CONFIG_DVB_LNBP22_MODULE) && defined(MODULE))
+/*
+ * override_set and override_clear control which system register bits (above)
+ * to always set & clear
+ */
+extern struct dvb_frontend *lnbp22_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c);
+#else
+static inline struct dvb_frontend *lnbp22_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif /* CONFIG_DVB_LNBP22 */
+
+#endif /* _LNBP22_H */