ARM: Remove dependency of plat-orion time code on mach directory includes.
This patch makes the various mach dirs that use the plat-orion time
code pass in timer and bridge addresses explicitly, instead of having
plat-orion get those values by including a mach dir include file --
the latter mechanism is problematic if you want to support multiple
ARM platforms in the same kernel image.
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index c3da247..742b032 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -18,28 +18,42 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/sched_clock.h>
-#include <asm/mach/time.h>
-#include <mach/bridge-regs.h>
-#include <mach/hardware.h>
/*
- * Number of timer ticks per jiffy.
+ * MBus bridge block registers.
*/
-static u32 ticks_per_jiffy;
+#define BRIDGE_CAUSE_OFF 0x0110
+#define BRIDGE_MASK_OFF 0x0114
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
/*
* Timer block registers.
*/
-#define TIMER_CTRL (TIMER_VIRT_BASE + 0x0000)
-#define TIMER0_EN 0x0001
-#define TIMER0_RELOAD_EN 0x0002
-#define TIMER1_EN 0x0004
-#define TIMER1_RELOAD_EN 0x0008
-#define TIMER0_RELOAD (TIMER_VIRT_BASE + 0x0010)
-#define TIMER0_VAL (TIMER_VIRT_BASE + 0x0014)
-#define TIMER1_RELOAD (TIMER_VIRT_BASE + 0x0018)
-#define TIMER1_VAL (TIMER_VIRT_BASE + 0x001c)
+#define TIMER_CTRL_OFF 0x0000
+#define TIMER0_EN 0x0001
+#define TIMER0_RELOAD_EN 0x0002
+#define TIMER1_EN 0x0004
+#define TIMER1_RELOAD_EN 0x0008
+#define TIMER0_RELOAD_OFF 0x0010
+#define TIMER0_VAL_OFF 0x0014
+#define TIMER1_RELOAD_OFF 0x0018
+#define TIMER1_VAL_OFF 0x001c
+
+
+/*
+ * SoC-specific data.
+ */
+static void __iomem *bridge_base;
+static u32 bridge_timer1_clr_mask;
+static void __iomem *timer_base;
+
+
+/*
+ * Number of timer ticks per jiffy.
+ */
+static u32 ticks_per_jiffy;
/*
@@ -50,14 +64,14 @@
unsigned long long notrace sched_clock(void)
{
- u32 cyc = 0xffffffff - readl(TIMER0_VAL);
+ u32 cyc = ~readl(timer_base + TIMER0_VAL_OFF);
return cyc_to_sched_clock(&cd, cyc, (u32)~0);
}
static void notrace orion_update_sched_clock(void)
{
- u32 cyc = 0xffffffff - readl(TIMER0_VAL);
+ u32 cyc = ~readl(timer_base + TIMER0_VAL_OFF);
update_sched_clock(&cd, cyc, (u32)~0);
}
@@ -71,7 +85,7 @@
*/
static cycle_t orion_clksrc_read(struct clocksource *cs)
{
- return 0xffffffff - readl(TIMER0_VAL);
+ return 0xffffffff - readl(timer_base + TIMER0_VAL_OFF);
}
static struct clocksource orion_clksrc = {
@@ -101,23 +115,23 @@
/*
* Clear and enable clockevent timer interrupt.
*/
- writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
+ writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF);
- u = readl(BRIDGE_MASK);
+ u = readl(bridge_base + BRIDGE_MASK_OFF);
u |= BRIDGE_INT_TIMER1;
- writel(u, BRIDGE_MASK);
+ writel(u, bridge_base + BRIDGE_MASK_OFF);
/*
* Setup new clockevent timer value.
*/
- writel(delta, TIMER1_VAL);
+ writel(delta, timer_base + TIMER1_VAL_OFF);
/*
* Enable the timer.
*/
- u = readl(TIMER_CTRL);
+ u = readl(timer_base + TIMER_CTRL_OFF);
u = (u & ~TIMER1_RELOAD_EN) | TIMER1_EN;
- writel(u, TIMER_CTRL);
+ writel(u, timer_base + TIMER_CTRL_OFF);
local_irq_restore(flags);
@@ -135,37 +149,38 @@
/*
* Setup timer to fire at 1/HZ intervals.
*/
- writel(ticks_per_jiffy - 1, TIMER1_RELOAD);
- writel(ticks_per_jiffy - 1, TIMER1_VAL);
+ writel(ticks_per_jiffy - 1, timer_base + TIMER1_RELOAD_OFF);
+ writel(ticks_per_jiffy - 1, timer_base + TIMER1_VAL_OFF);
/*
* Enable timer interrupt.
*/
- u = readl(BRIDGE_MASK);
- writel(u | BRIDGE_INT_TIMER1, BRIDGE_MASK);
+ u = readl(bridge_base + BRIDGE_MASK_OFF);
+ writel(u | BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF);
/*
* Enable timer.
*/
- u = readl(TIMER_CTRL);
- writel(u | TIMER1_EN | TIMER1_RELOAD_EN, TIMER_CTRL);
+ u = readl(timer_base + TIMER_CTRL_OFF);
+ writel(u | TIMER1_EN | TIMER1_RELOAD_EN,
+ timer_base + TIMER_CTRL_OFF);
} else {
/*
* Disable timer.
*/
- u = readl(TIMER_CTRL);
- writel(u & ~TIMER1_EN, TIMER_CTRL);
+ u = readl(timer_base + TIMER_CTRL_OFF);
+ writel(u & ~TIMER1_EN, timer_base + TIMER_CTRL_OFF);
/*
* Disable timer interrupt.
*/
- u = readl(BRIDGE_MASK);
- writel(u & ~BRIDGE_INT_TIMER1, BRIDGE_MASK);
+ u = readl(bridge_base + BRIDGE_MASK_OFF);
+ writel(u & ~BRIDGE_INT_TIMER1, bridge_base + BRIDGE_MASK_OFF);
/*
* ACK pending timer interrupt.
*/
- writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
+ writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF);
}
local_irq_restore(flags);
@@ -185,7 +200,7 @@
/*
* ACK timer interrupt and call event handler.
*/
- writel(BRIDGE_INT_TIMER1_CLR, BRIDGE_CAUSE);
+ writel(bridge_timer1_clr_mask, bridge_base + BRIDGE_CAUSE_OFF);
orion_clkevt.event_handler(&orion_clkevt);
return IRQ_HANDLED;
@@ -197,31 +212,45 @@
.handler = orion_timer_interrupt
};
-void __init orion_time_init(unsigned int irq, unsigned int tclk)
+void __init
+orion_time_set_base(u32 _timer_base)
+{
+ timer_base = (void __iomem *)_timer_base;
+}
+
+void __init
+orion_time_init(u32 _bridge_base, u32 _bridge_timer1_clr_mask,
+ unsigned int irq, unsigned int tclk)
{
u32 u;
+ /*
+ * Set SoC-specific data.
+ */
+ bridge_base = (void __iomem *)_bridge_base;
+ bridge_timer1_clr_mask = _bridge_timer1_clr_mask;
+
ticks_per_jiffy = (tclk + HZ/2) / HZ;
/*
- * Set scale and timer for sched_clock
+ * Set scale and timer for sched_clock.
*/
setup_sched_clock(tclk);
/*
* Setup free-running clocksource timer (interrupts
- * disabled.)
+ * disabled).
*/
- writel(0xffffffff, TIMER0_VAL);
- writel(0xffffffff, TIMER0_RELOAD);
- u = readl(BRIDGE_MASK);
- writel(u & ~BRIDGE_INT_TIMER0, BRIDGE_MASK);
- u = readl(TIMER_CTRL);
- writel(u | TIMER0_EN | TIMER0_RELOAD_EN, TIMER_CTRL);
+ writel(0xffffffff, timer_base + TIMER0_VAL_OFF);
+ writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF);
+ u = readl(bridge_base + BRIDGE_MASK_OFF);
+ writel(u & ~BRIDGE_INT_TIMER0, bridge_base + BRIDGE_MASK_OFF);
+ u = readl(timer_base + TIMER_CTRL_OFF);
+ writel(u | TIMER0_EN | TIMER0_RELOAD_EN, timer_base + TIMER_CTRL_OFF);
clocksource_register_hz(&orion_clksrc, tclk);
/*
- * Setup clockevent timer (interrupt-driven.)
+ * Setup clockevent timer (interrupt-driven).
*/
setup_irq(irq, &orion_timer_irq);
orion_clkevt.mult = div_sc(tclk, NSEC_PER_SEC, orion_clkevt.shift);