[PATCH] CRIS update: new subarchitecture v32
New CRIS sub architecture named v32.
From: Dave Jones <davej@redhat.com>
Fix swapped kmalloc args
Signed-off-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/arch/cris/arch-v32/drivers/gpio.c b/arch/cris/arch-v32/drivers/gpio.c
new file mode 100644
index 0000000..a551237
--- /dev/null
+++ b/arch/cris/arch-v32/drivers/gpio.c
@@ -0,0 +1,766 @@
+/* $Id: gpio.c,v 1.16 2005/06/19 17:06:49 starvik Exp $
+ *
+ * ETRAX CRISv32 general port I/O device
+ *
+ * Copyright (c) 1999, 2000, 2001, 2002, 2003 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen (initial version)
+ * Ola Knutsson (LED handling)
+ * Johan Adolfsson (read/set directions, write, port G,
+ * port to ETRAX FS.
+ *
+ * $Log: gpio.c,v $
+ * Revision 1.16 2005/06/19 17:06:49 starvik
+ * Merge of Linux 2.6.12.
+ *
+ * Revision 1.15 2005/05/25 08:22:20 starvik
+ * Changed GPIO port order to fit packages/devices/axis-2.4.
+ *
+ * Revision 1.14 2005/04/24 18:35:08 starvik
+ * Updated with final register headers.
+ *
+ * Revision 1.13 2005/03/15 15:43:00 starvik
+ * dev_id needs to be supplied for shared IRQs.
+ *
+ * Revision 1.12 2005/03/10 17:12:00 starvik
+ * Protect alarm list with spinlock.
+ *
+ * Revision 1.11 2005/01/05 06:08:59 starvik
+ * No need to do local_irq_disable after local_irq_save.
+ *
+ * Revision 1.10 2004/11/19 08:38:31 starvik
+ * Removed old crap.
+ *
+ * Revision 1.9 2004/05/14 07:58:02 starvik
+ * Merge of changes from 2.4
+ *
+ * Revision 1.8 2003/09/11 07:29:50 starvik
+ * Merge of Linux 2.6.0-test5
+ *
+ * Revision 1.7 2003/07/10 13:25:46 starvik
+ * Compiles for 2.5.74
+ * Lindented ethernet.c
+ *
+ * Revision 1.6 2003/07/04 08:27:46 starvik
+ * Merge of Linux 2.5.74
+ *
+ * Revision 1.5 2003/06/10 08:26:37 johana
+ * Etrax -> ETRAX CRISv32
+ *
+ * Revision 1.4 2003/06/05 14:22:48 johana
+ * Initialise some_alarms.
+ *
+ * Revision 1.3 2003/06/05 10:15:46 johana
+ * New INTR_VECT macros.
+ * Enable interrupts in global config.
+ *
+ * Revision 1.2 2003/06/03 15:52:50 johana
+ * Initial CRIS v32 version.
+ *
+ * Revision 1.1 2003/06/03 08:53:15 johana
+ * Copy of os/lx25/arch/cris/arch-v10/drivers/gpio.c version 1.7.
+ *
+ */
+
+#include <linux/config.h>
+
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+
+#include <asm/etraxgpio.h>
+#include <asm/arch/hwregs/reg_map.h>
+#include <asm/arch/hwregs/reg_rdwr.h>
+#include <asm/arch/hwregs/gio_defs.h>
+#include <asm/arch/hwregs/intr_vect_defs.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+
+/* The following gio ports on ETRAX FS is available:
+ * pa 8 bits, supports interrupts off, hi, low, set, posedge, negedge anyedge
+ * pb 18 bits
+ * pc 18 bits
+ * pd 18 bits
+ * pe 18 bits
+ * each port has a rw_px_dout, r_px_din and rw_px_oe register.
+ */
+
+#define GPIO_MAJOR 120 /* experimental MAJOR number */
+
+#define D(x)
+
+#if 0
+static int dp_cnt;
+#define DP(x) do { dp_cnt++; if (dp_cnt % 1000 == 0) x; }while(0)
+#else
+#define DP(x)
+#endif
+
+static char gpio_name[] = "etrax gpio";
+
+#if 0
+static wait_queue_head_t *gpio_wq;
+#endif
+
+static int gpio_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg);
+static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
+ loff_t *off);
+static int gpio_open(struct inode *inode, struct file *filp);
+static int gpio_release(struct inode *inode, struct file *filp);
+static unsigned int gpio_poll(struct file *filp, struct poll_table_struct *wait);
+
+/* private data per open() of this driver */
+
+struct gpio_private {
+ struct gpio_private *next;
+ /* The IO_CFG_WRITE_MODE_VALUE only support 8 bits: */
+ unsigned char clk_mask;
+ unsigned char data_mask;
+ unsigned char write_msb;
+ unsigned char pad1;
+ /* These fields are generic */
+ unsigned long highalarm, lowalarm;
+ wait_queue_head_t alarm_wq;
+ int minor;
+};
+
+/* linked list of alarms to check for */
+
+static struct gpio_private *alarmlist = 0;
+
+static int gpio_some_alarms = 0; /* Set if someone uses alarm */
+static unsigned long gpio_pa_high_alarms = 0;
+static unsigned long gpio_pa_low_alarms = 0;
+
+static DEFINE_SPINLOCK(alarm_lock);
+
+#define NUM_PORTS (GPIO_MINOR_LAST+1)
+#define GIO_REG_RD_ADDR(reg) (volatile unsigned long*) (regi_gio + REG_RD_ADDR_gio_##reg )
+#define GIO_REG_WR_ADDR(reg) (volatile unsigned long*) (regi_gio + REG_RD_ADDR_gio_##reg )
+unsigned long led_dummy;
+
+static volatile unsigned long *data_out[NUM_PORTS] = {
+ GIO_REG_WR_ADDR(rw_pa_dout),
+ GIO_REG_WR_ADDR(rw_pb_dout),
+ &led_dummy,
+ GIO_REG_WR_ADDR(rw_pc_dout),
+ GIO_REG_WR_ADDR(rw_pd_dout),
+ GIO_REG_WR_ADDR(rw_pe_dout),
+};
+
+static volatile unsigned long *data_in[NUM_PORTS] = {
+ GIO_REG_RD_ADDR(r_pa_din),
+ GIO_REG_RD_ADDR(r_pb_din),
+ &led_dummy,
+ GIO_REG_RD_ADDR(r_pc_din),
+ GIO_REG_RD_ADDR(r_pd_din),
+ GIO_REG_RD_ADDR(r_pe_din),
+};
+
+static unsigned long changeable_dir[NUM_PORTS] = {
+ CONFIG_ETRAX_PA_CHANGEABLE_DIR,
+ CONFIG_ETRAX_PB_CHANGEABLE_DIR,
+ 0,
+ CONFIG_ETRAX_PC_CHANGEABLE_DIR,
+ CONFIG_ETRAX_PD_CHANGEABLE_DIR,
+ CONFIG_ETRAX_PE_CHANGEABLE_DIR,
+};
+
+static unsigned long changeable_bits[NUM_PORTS] = {
+ CONFIG_ETRAX_PA_CHANGEABLE_BITS,
+ CONFIG_ETRAX_PB_CHANGEABLE_BITS,
+ 0,
+ CONFIG_ETRAX_PC_CHANGEABLE_BITS,
+ CONFIG_ETRAX_PD_CHANGEABLE_BITS,
+ CONFIG_ETRAX_PE_CHANGEABLE_BITS,
+};
+
+static volatile unsigned long *dir_oe[NUM_PORTS] = {
+ GIO_REG_WR_ADDR(rw_pa_oe),
+ GIO_REG_WR_ADDR(rw_pb_oe),
+ &led_dummy,
+ GIO_REG_WR_ADDR(rw_pc_oe),
+ GIO_REG_WR_ADDR(rw_pd_oe),
+ GIO_REG_WR_ADDR(rw_pe_oe),
+};
+
+
+
+static unsigned int
+gpio_poll(struct file *file,
+ poll_table *wait)
+{
+ unsigned int mask = 0;
+ struct gpio_private *priv = (struct gpio_private *)file->private_data;
+ unsigned long data;
+ poll_wait(file, &priv->alarm_wq, wait);
+ if (priv->minor == GPIO_MINOR_A) {
+ reg_gio_rw_intr_cfg intr_cfg;
+ unsigned long tmp;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ data = REG_TYPE_CONV(unsigned long, reg_gio_r_pa_din, REG_RD(gio, regi_gio, r_pa_din));
+ /* PA has support for interrupt
+ * lets activate high for those low and with highalarm set
+ */
+ intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
+
+ tmp = ~data & priv->highalarm & 0xFF;
+ if (tmp & (1 << 0)) {
+ intr_cfg.pa0 = regk_gio_hi;
+ }
+ if (tmp & (1 << 1)) {
+ intr_cfg.pa1 = regk_gio_hi;
+ }
+ if (tmp & (1 << 2)) {
+ intr_cfg.pa2 = regk_gio_hi;
+ }
+ if (tmp & (1 << 3)) {
+ intr_cfg.pa3 = regk_gio_hi;
+ }
+ if (tmp & (1 << 4)) {
+ intr_cfg.pa4 = regk_gio_hi;
+ }
+ if (tmp & (1 << 5)) {
+ intr_cfg.pa5 = regk_gio_hi;
+ }
+ if (tmp & (1 << 6)) {
+ intr_cfg.pa6 = regk_gio_hi;
+ }
+ if (tmp & (1 << 7)) {
+ intr_cfg.pa7 = regk_gio_hi;
+ }
+ /*
+ * lets activate low for those high and with lowalarm set
+ */
+ tmp = data & priv->lowalarm & 0xFF;
+ if (tmp & (1 << 0)) {
+ intr_cfg.pa0 = regk_gio_lo;
+ }
+ if (tmp & (1 << 1)) {
+ intr_cfg.pa1 = regk_gio_lo;
+ }
+ if (tmp & (1 << 2)) {
+ intr_cfg.pa2 = regk_gio_lo;
+ }
+ if (tmp & (1 << 3)) {
+ intr_cfg.pa3 = regk_gio_lo;
+ }
+ if (tmp & (1 << 4)) {
+ intr_cfg.pa4 = regk_gio_lo;
+ }
+ if (tmp & (1 << 5)) {
+ intr_cfg.pa5 = regk_gio_lo;
+ }
+ if (tmp & (1 << 6)) {
+ intr_cfg.pa6 = regk_gio_lo;
+ }
+ if (tmp & (1 << 7)) {
+ intr_cfg.pa7 = regk_gio_lo;
+ }
+
+ REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
+ local_irq_restore(flags);
+ } else if (priv->minor <= GPIO_MINOR_E)
+ data = *data_in[priv->minor];
+ else
+ return 0;
+
+ if ((data & priv->highalarm) ||
+ (~data & priv->lowalarm)) {
+ mask = POLLIN|POLLRDNORM;
+ }
+
+ DP(printk("gpio_poll ready: mask 0x%08X\n", mask));
+ return mask;
+}
+
+int etrax_gpio_wake_up_check(void)
+{
+ struct gpio_private *priv = alarmlist;
+ unsigned long data = 0;
+ int ret = 0;
+ while (priv) {
+ data = *data_in[priv->minor];
+ if ((data & priv->highalarm) ||
+ (~data & priv->lowalarm)) {
+ DP(printk("etrax_gpio_wake_up_check %i\n",priv->minor));
+ wake_up_interruptible(&priv->alarm_wq);
+ ret = 1;
+ }
+ priv = priv->next;
+ }
+ return ret;
+}
+
+static irqreturn_t
+gpio_poll_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ if (gpio_some_alarms) {
+ return IRQ_RETVAL(etrax_gpio_wake_up_check());
+ }
+ return IRQ_NONE;
+}
+
+static irqreturn_t
+gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ reg_gio_rw_intr_mask intr_mask;
+ reg_gio_r_masked_intr masked_intr;
+ reg_gio_rw_ack_intr ack_intr;
+ unsigned long tmp;
+ unsigned long tmp2;
+
+ /* Find what PA interrupts are active */
+ masked_intr = REG_RD(gio, regi_gio, r_masked_intr);
+ tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr);
+
+ /* Find those that we have enabled */
+ spin_lock(&alarm_lock);
+ tmp &= (gpio_pa_high_alarms | gpio_pa_low_alarms);
+ spin_unlock(&alarm_lock);
+
+ /* Ack them */
+ ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp);
+ REG_WR(gio, regi_gio, rw_ack_intr, ack_intr);
+
+ /* Disable those interrupts.. */
+ intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
+ tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask);
+ tmp2 &= ~tmp;
+ intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2);
+ REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
+
+ if (gpio_some_alarms) {
+ return IRQ_RETVAL(etrax_gpio_wake_up_check());
+ }
+ return IRQ_NONE;
+}
+
+
+static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
+ loff_t *off)
+{
+ struct gpio_private *priv = (struct gpio_private *)file->private_data;
+ unsigned char data, clk_mask, data_mask, write_msb;
+ unsigned long flags;
+ unsigned long shadow;
+ volatile unsigned long *port;
+ ssize_t retval = count;
+ /* Only bits 0-7 may be used for write operations but allow all
+ devices except leds... */
+ if (priv->minor == GPIO_MINOR_LEDS) {
+ return -EFAULT;
+ }
+
+ if (!access_ok(VERIFY_READ, buf, count)) {
+ return -EFAULT;
+ }
+ clk_mask = priv->clk_mask;
+ data_mask = priv->data_mask;
+ /* It must have been configured using the IO_CFG_WRITE_MODE */
+ /* Perhaps a better error code? */
+ if (clk_mask == 0 || data_mask == 0) {
+ return -EPERM;
+ }
+ write_msb = priv->write_msb;
+ D(printk("gpio_write: %lu to data 0x%02X clk 0x%02X msb: %i\n",count, data_mask, clk_mask, write_msb));
+ port = data_out[priv->minor];
+
+ while (count--) {
+ int i;
+ data = *buf++;
+ if (priv->write_msb) {
+ for (i = 7; i >= 0;i--) {
+ local_irq_save(flags);
+ shadow = *port;
+ *port = shadow &= ~clk_mask;
+ if (data & 1<<i)
+ *port = shadow |= data_mask;
+ else
+ *port = shadow &= ~data_mask;
+ /* For FPGA: min 5.0ns (DCC) before CCLK high */
+ *port = shadow |= clk_mask;
+ local_irq_restore(flags);
+ }
+ } else {
+ for (i = 0; i <= 7;i++) {
+ local_irq_save(flags);
+ shadow = *port;
+ *port = shadow &= ~clk_mask;
+ if (data & 1<<i)
+ *port = shadow |= data_mask;
+ else
+ *port = shadow &= ~data_mask;
+ /* For FPGA: min 5.0ns (DCC) before CCLK high */
+ *port = shadow |= clk_mask;
+ local_irq_restore(flags);
+ }
+ }
+ }
+ return retval;
+}
+
+
+
+static int
+gpio_open(struct inode *inode, struct file *filp)
+{
+ struct gpio_private *priv;
+ int p = MINOR(inode->i_rdev);
+
+ if (p > GPIO_MINOR_LAST)
+ return -EINVAL;
+
+ priv = (struct gpio_private *)kmalloc(sizeof(struct gpio_private),
+ GFP_KERNEL);
+
+ if (!priv)
+ return -ENOMEM;
+
+ priv->minor = p;
+
+ /* initialize the io/alarm struct and link it into our alarmlist */
+
+ priv->next = alarmlist;
+ alarmlist = priv;
+ priv->clk_mask = 0;
+ priv->data_mask = 0;
+ priv->highalarm = 0;
+ priv->lowalarm = 0;
+ init_waitqueue_head(&priv->alarm_wq);
+
+ filp->private_data = (void *)priv;
+
+ return 0;
+}
+
+static int
+gpio_release(struct inode *inode, struct file *filp)
+{
+ struct gpio_private *p = alarmlist;
+ struct gpio_private *todel = (struct gpio_private *)filp->private_data;
+ /* local copies while updating them: */
+ unsigned long a_high, a_low;
+ unsigned long some_alarms;
+
+ /* unlink from alarmlist and free the private structure */
+
+ if (p == todel) {
+ alarmlist = todel->next;
+ } else {
+ while (p->next != todel)
+ p = p->next;
+ p->next = todel->next;
+ }
+
+ kfree(todel);
+ /* Check if there are still any alarms set */
+ p = alarmlist;
+ some_alarms = 0;
+ a_high = 0;
+ a_low = 0;
+ while (p) {
+ if (p->minor == GPIO_MINOR_A) {
+ a_high |= p->highalarm;
+ a_low |= p->lowalarm;
+ }
+
+ if (p->highalarm | p->lowalarm) {
+ some_alarms = 1;
+ }
+ p = p->next;
+ }
+
+ spin_lock(&alarm_lock);
+ gpio_some_alarms = some_alarms;
+ gpio_pa_high_alarms = a_high;
+ gpio_pa_low_alarms = a_low;
+ spin_unlock(&alarm_lock);
+
+ return 0;
+}
+
+/* Main device API. ioctl's to read/set/clear bits, as well as to
+ * set alarms to wait for using a subsequent select().
+ */
+
+unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg)
+{
+ /* Set direction 0=unchanged 1=input,
+ * return mask with 1=input
+ */
+ unsigned long flags;
+ unsigned long dir_shadow;
+
+ local_irq_save(flags);
+ dir_shadow = *dir_oe[priv->minor];
+ dir_shadow &= ~(arg & changeable_dir[priv->minor]);
+ *dir_oe[priv->minor] = dir_shadow;
+ local_irq_restore(flags);
+
+ if (priv->minor == GPIO_MINOR_A)
+ dir_shadow ^= 0xFF; /* Only 8 bits */
+ else
+ dir_shadow ^= 0x3FFFF; /* Only 18 bits */
+ return dir_shadow;
+
+} /* setget_input */
+
+unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg)
+{
+ unsigned long flags;
+ unsigned long dir_shadow;
+
+ local_irq_save(flags);
+ dir_shadow = *dir_oe[priv->minor];
+ dir_shadow |= (arg & changeable_dir[priv->minor]);
+ *dir_oe[priv->minor] = dir_shadow;
+ local_irq_restore(flags);
+ return dir_shadow;
+} /* setget_output */
+
+static int
+gpio_leds_ioctl(unsigned int cmd, unsigned long arg);
+
+static int
+gpio_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ unsigned long flags;
+ unsigned long val;
+ unsigned long shadow;
+ struct gpio_private *priv = (struct gpio_private *)file->private_data;
+ if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) {
+ return -EINVAL;
+ }
+
+ switch (_IOC_NR(cmd)) {
+ case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
+ // read the port
+ return *data_in[priv->minor];
+ break;
+ case IO_SETBITS:
+ local_irq_save(flags);
+ if (arg & 0x04)
+ printk("GPIO SET 2\n");
+ // set changeable bits with a 1 in arg
+ shadow = *data_out[priv->minor];
+ shadow |= (arg & changeable_bits[priv->minor]);
+ *data_out[priv->minor] = shadow;
+ local_irq_restore(flags);
+ break;
+ case IO_CLRBITS:
+ local_irq_save(flags);
+ if (arg & 0x04)
+ printk("GPIO CLR 2\n");
+ // clear changeable bits with a 1 in arg
+ shadow = *data_out[priv->minor];
+ shadow &= ~(arg & changeable_bits[priv->minor]);
+ *data_out[priv->minor] = shadow;
+ local_irq_restore(flags);
+ break;
+ case IO_HIGHALARM:
+ // set alarm when bits with 1 in arg go high
+ priv->highalarm |= arg;
+ spin_lock(&alarm_lock);
+ gpio_some_alarms = 1;
+ if (priv->minor == GPIO_MINOR_A) {
+ gpio_pa_high_alarms |= arg;
+ }
+ spin_unlock(&alarm_lock);
+ break;
+ case IO_LOWALARM:
+ // set alarm when bits with 1 in arg go low
+ priv->lowalarm |= arg;
+ spin_lock(&alarm_lock);
+ gpio_some_alarms = 1;
+ if (priv->minor == GPIO_MINOR_A) {
+ gpio_pa_low_alarms |= arg;
+ }
+ spin_unlock(&alarm_lock);
+ break;
+ case IO_CLRALARM:
+ // clear alarm for bits with 1 in arg
+ priv->highalarm &= ~arg;
+ priv->lowalarm &= ~arg;
+ spin_lock(&alarm_lock);
+ if (priv->minor == GPIO_MINOR_A) {
+ if (gpio_pa_high_alarms & arg ||
+ gpio_pa_low_alarms & arg) {
+ /* Must update the gpio_pa_*alarms masks */
+ }
+ }
+ spin_unlock(&alarm_lock);
+ break;
+ case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
+ /* Read direction 0=input 1=output */
+ return *dir_oe[priv->minor];
+ case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
+ /* Set direction 0=unchanged 1=input,
+ * return mask with 1=input
+ */
+ return setget_input(priv, arg);
+ break;
+ case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
+ /* Set direction 0=unchanged 1=output,
+ * return mask with 1=output
+ */
+ return setget_output(priv, arg);
+
+ case IO_CFG_WRITE_MODE:
+ {
+ unsigned long dir_shadow;
+ dir_shadow = *dir_oe[priv->minor];
+
+ priv->clk_mask = arg & 0xFF;
+ priv->data_mask = (arg >> 8) & 0xFF;
+ priv->write_msb = (arg >> 16) & 0x01;
+ /* Check if we're allowed to change the bits and
+ * the direction is correct
+ */
+ if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
+ (priv->data_mask & changeable_bits[priv->minor]) &&
+ (priv->clk_mask & dir_shadow) &&
+ (priv->data_mask & dir_shadow)))
+ {
+ priv->clk_mask = 0;
+ priv->data_mask = 0;
+ return -EPERM;
+ }
+ break;
+ }
+ case IO_READ_INBITS:
+ /* *arg is result of reading the input pins */
+ val = *data_in[priv->minor];
+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+ return -EFAULT;
+ return 0;
+ break;
+ case IO_READ_OUTBITS:
+ /* *arg is result of reading the output shadow */
+ val = *data_out[priv->minor];
+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+ return -EFAULT;
+ break;
+ case IO_SETGET_INPUT:
+ /* bits set in *arg is set to input,
+ * *arg updated with current input pins.
+ */
+ if (copy_from_user(&val, (unsigned long*)arg, sizeof(val)))
+ return -EFAULT;
+ val = setget_input(priv, val);
+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+ return -EFAULT;
+ break;
+ case IO_SETGET_OUTPUT:
+ /* bits set in *arg is set to output,
+ * *arg updated with current output pins.
+ */
+ if (copy_from_user(&val, (unsigned long*)arg, sizeof(val)))
+ return -EFAULT;
+ val = setget_output(priv, val);
+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
+ return -EFAULT;
+ break;
+ default:
+ if (priv->minor == GPIO_MINOR_LEDS)
+ return gpio_leds_ioctl(cmd, arg);
+ else
+ return -EINVAL;
+ } /* switch */
+
+ return 0;
+}
+
+static int
+gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
+{
+ unsigned char green;
+ unsigned char red;
+
+ switch (_IOC_NR(cmd)) {
+ case IO_LEDACTIVE_SET:
+ green = ((unsigned char) arg) & 1;
+ red = (((unsigned char) arg) >> 1) & 1;
+ LED_ACTIVE_SET_G(green);
+ LED_ACTIVE_SET_R(red);
+ break;
+
+ default:
+ return -EINVAL;
+ } /* switch */
+
+ return 0;
+}
+
+struct file_operations gpio_fops = {
+ .owner = THIS_MODULE,
+ .poll = gpio_poll,
+ .ioctl = gpio_ioctl,
+ .write = gpio_write,
+ .open = gpio_open,
+ .release = gpio_release,
+};
+
+
+/* main driver initialization routine, called from mem.c */
+
+static __init int
+gpio_init(void)
+{
+ int res;
+ reg_intr_vect_rw_mask intr_mask;
+
+ /* do the formalities */
+
+ res = register_chrdev(GPIO_MAJOR, gpio_name, &gpio_fops);
+ if (res < 0) {
+ printk(KERN_ERR "gpio: couldn't get a major number.\n");
+ return res;
+ }
+
+ /* Clear all leds */
+ LED_NETWORK_SET(0);
+ LED_ACTIVE_SET(0);
+ LED_DISK_READ(0);
+ LED_DISK_WRITE(0);
+
+ printk("ETRAX FS GPIO driver v2.5, (c) 2003-2005 Axis Communications AB\n");
+ /* We call etrax_gpio_wake_up_check() from timer interrupt and
+ * from cpu_idle() in kernel/process.c
+ * The check in cpu_idle() reduces latency from ~15 ms to ~6 ms
+ * in some tests.
+ */
+ if (request_irq(TIMER_INTR_VECT, gpio_poll_timer_interrupt,
+ SA_SHIRQ | SA_INTERRUPT,"gpio poll", &alarmlist)) {
+ printk("err: timer0 irq for gpio\n");
+ }
+ if (request_irq(GEN_IO_INTR_VECT, gpio_pa_interrupt,
+ SA_SHIRQ | SA_INTERRUPT,"gpio PA", &alarmlist)) {
+ printk("err: PA irq for gpio\n");
+ }
+ /* enable the gio and timer irq in global config */
+ intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
+ intr_mask.timer = 1;
+ intr_mask.gen_io = 1;
+ REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
+
+ return res;
+}
+
+/* this makes sure that gpio_init is called during kernel boot */
+
+module_init(gpio_init);