iwlwifi: remove uses of __constant_{endian} helpers

The base versions handle constant folding just fine.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-commands.h b/drivers/net/wireless/iwlwifi/iwl-3945-commands.h
index 8772d9d..735891a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-commands.h
@@ -220,7 +220,7 @@
  *
  *****************************************************************************/
 
-#define UCODE_VALID_OK	__constant_cpu_to_le32(0x1)
+#define UCODE_VALID_OK	cpu_to_le32(0x1)
 #define INITIALIZE_SUBTYPE    (9)
 
 /*
@@ -322,42 +322,42 @@
 
 /* rx_config flags */
 /* band & modulation selection */
-#define RXON_FLG_BAND_24G_MSK           __constant_cpu_to_le32(1 << 0)
-#define RXON_FLG_CCK_MSK                __constant_cpu_to_le32(1 << 1)
+#define RXON_FLG_BAND_24G_MSK           cpu_to_le32(1 << 0)
+#define RXON_FLG_CCK_MSK                cpu_to_le32(1 << 1)
 /* auto detection enable */
-#define RXON_FLG_AUTO_DETECT_MSK        __constant_cpu_to_le32(1 << 2)
+#define RXON_FLG_AUTO_DETECT_MSK        cpu_to_le32(1 << 2)
 /* TGg protection when tx */
-#define RXON_FLG_TGG_PROTECT_MSK        __constant_cpu_to_le32(1 << 3)
+#define RXON_FLG_TGG_PROTECT_MSK        cpu_to_le32(1 << 3)
 /* cck short slot & preamble */
-#define RXON_FLG_SHORT_SLOT_MSK          __constant_cpu_to_le32(1 << 4)
-#define RXON_FLG_SHORT_PREAMBLE_MSK     __constant_cpu_to_le32(1 << 5)
+#define RXON_FLG_SHORT_SLOT_MSK          cpu_to_le32(1 << 4)
+#define RXON_FLG_SHORT_PREAMBLE_MSK     cpu_to_le32(1 << 5)
 /* antenna selection */
-#define RXON_FLG_DIS_DIV_MSK            __constant_cpu_to_le32(1 << 7)
-#define RXON_FLG_ANT_SEL_MSK            __constant_cpu_to_le32(0x0f00)
-#define RXON_FLG_ANT_A_MSK              __constant_cpu_to_le32(1 << 8)
-#define RXON_FLG_ANT_B_MSK              __constant_cpu_to_le32(1 << 9)
+#define RXON_FLG_DIS_DIV_MSK            cpu_to_le32(1 << 7)
+#define RXON_FLG_ANT_SEL_MSK            cpu_to_le32(0x0f00)
+#define RXON_FLG_ANT_A_MSK              cpu_to_le32(1 << 8)
+#define RXON_FLG_ANT_B_MSK              cpu_to_le32(1 << 9)
 /* radar detection enable */
-#define RXON_FLG_RADAR_DETECT_MSK       __constant_cpu_to_le32(1 << 12)
-#define RXON_FLG_TGJ_NARROW_BAND_MSK    __constant_cpu_to_le32(1 << 13)
+#define RXON_FLG_RADAR_DETECT_MSK       cpu_to_le32(1 << 12)
+#define RXON_FLG_TGJ_NARROW_BAND_MSK    cpu_to_le32(1 << 13)
 /* rx response to host with 8-byte TSF
 * (according to ON_AIR deassertion) */
-#define RXON_FLG_TSF2HOST_MSK           __constant_cpu_to_le32(1 << 15)
+#define RXON_FLG_TSF2HOST_MSK           cpu_to_le32(1 << 15)
 
 /* rx_config filter flags */
 /* accept all data frames */
-#define RXON_FILTER_PROMISC_MSK         __constant_cpu_to_le32(1 << 0)
+#define RXON_FILTER_PROMISC_MSK         cpu_to_le32(1 << 0)
 /* pass control & management to host */
-#define RXON_FILTER_CTL2HOST_MSK        __constant_cpu_to_le32(1 << 1)
+#define RXON_FILTER_CTL2HOST_MSK        cpu_to_le32(1 << 1)
 /* accept multi-cast */
-#define RXON_FILTER_ACCEPT_GRP_MSK      __constant_cpu_to_le32(1 << 2)
+#define RXON_FILTER_ACCEPT_GRP_MSK      cpu_to_le32(1 << 2)
 /* don't decrypt uni-cast frames */
-#define RXON_FILTER_DIS_DECRYPT_MSK     __constant_cpu_to_le32(1 << 3)
+#define RXON_FILTER_DIS_DECRYPT_MSK     cpu_to_le32(1 << 3)
 /* don't decrypt multi-cast frames */
-#define RXON_FILTER_DIS_GRP_DECRYPT_MSK __constant_cpu_to_le32(1 << 4)
+#define RXON_FILTER_DIS_GRP_DECRYPT_MSK cpu_to_le32(1 << 4)
 /* STA is associated */
-#define RXON_FILTER_ASSOC_MSK           __constant_cpu_to_le32(1 << 5)
+#define RXON_FILTER_ASSOC_MSK           cpu_to_le32(1 << 5)
 /* transfer to host non bssid beacons in associated state */
-#define RXON_FILTER_BCON_AWARE_MSK      __constant_cpu_to_le32(1 << 6)
+#define RXON_FILTER_BCON_AWARE_MSK      cpu_to_le32(1 << 6)
 
 /**
  * REPLY_RXON = 0x10 (command, has simple generic response)
@@ -471,9 +471,9 @@
 } __attribute__ ((packed));
 
 /* QoS flags defines */
-#define QOS_PARAM_FLG_UPDATE_EDCA_MSK	__constant_cpu_to_le32(0x01)
-#define QOS_PARAM_FLG_TGN_MSK		__constant_cpu_to_le32(0x02)
-#define QOS_PARAM_FLG_TXOP_TYPE_MSK	__constant_cpu_to_le32(0x10)
+#define QOS_PARAM_FLG_UPDATE_EDCA_MSK	cpu_to_le32(0x01)
+#define QOS_PARAM_FLG_TGN_MSK		cpu_to_le32(0x02)
+#define QOS_PARAM_FLG_TXOP_TYPE_MSK	cpu_to_le32(0x10)
 
 /* Number of Access Categories (AC) (EDCA), queues 0..3 */
 #define AC_NUM                4
@@ -508,27 +508,27 @@
 #define	IWL_STATION_COUNT	32 	/* MAX(3945,4965)*/
 #define	IWL_INVALID_STATION 	255
 
-#define STA_FLG_TX_RATE_MSK		__constant_cpu_to_le32(1 << 2);
-#define STA_FLG_PWR_SAVE_MSK		__constant_cpu_to_le32(1 << 8);
+#define STA_FLG_TX_RATE_MSK		cpu_to_le32(1 << 2);
+#define STA_FLG_PWR_SAVE_MSK		cpu_to_le32(1 << 8);
 
 /* Use in mode field.  1: modify existing entry, 0: add new station entry */
 #define STA_CONTROL_MODIFY_MSK		0x01
 
 /* key flags __le16*/
-#define STA_KEY_FLG_ENCRYPT_MSK	__constant_cpu_to_le16(0x0007)
-#define STA_KEY_FLG_NO_ENC	__constant_cpu_to_le16(0x0000)
-#define STA_KEY_FLG_WEP		__constant_cpu_to_le16(0x0001)
-#define STA_KEY_FLG_CCMP	__constant_cpu_to_le16(0x0002)
-#define STA_KEY_FLG_TKIP	__constant_cpu_to_le16(0x0003)
+#define STA_KEY_FLG_ENCRYPT_MSK	cpu_to_le16(0x0007)
+#define STA_KEY_FLG_NO_ENC	cpu_to_le16(0x0000)
+#define STA_KEY_FLG_WEP		cpu_to_le16(0x0001)
+#define STA_KEY_FLG_CCMP	cpu_to_le16(0x0002)
+#define STA_KEY_FLG_TKIP	cpu_to_le16(0x0003)
 
 #define STA_KEY_FLG_KEYID_POS	8
-#define STA_KEY_FLG_INVALID 	__constant_cpu_to_le16(0x0800)
+#define STA_KEY_FLG_INVALID 	cpu_to_le16(0x0800)
 /* wep key is either from global key (0) or from station info array (1) */
-#define STA_KEY_FLG_WEP_KEY_MAP_MSK  __constant_cpu_to_le16(0x0008)
+#define STA_KEY_FLG_WEP_KEY_MAP_MSK  cpu_to_le16(0x0008)
 
 /* wep key in STA: 5-bytes (0) or 13-bytes (1) */
-#define STA_KEY_FLG_KEY_SIZE_MSK     __constant_cpu_to_le16(0x1000)
-#define STA_KEY_MULTICAST_MSK        __constant_cpu_to_le16(0x4000)
+#define STA_KEY_FLG_KEY_SIZE_MSK     cpu_to_le16(0x1000)
+#define STA_KEY_MULTICAST_MSK        cpu_to_le16(0x4000)
 
 /* Flags indicate whether to modify vs. don't change various station params */
 #define	STA_MODIFY_KEY_MASK		0x01
@@ -666,14 +666,14 @@
 	u8 payload[0];
 } __attribute__ ((packed));
 
-#define RX_RES_STATUS_NO_CRC32_ERROR	__constant_cpu_to_le32(1 << 0)
-#define RX_RES_STATUS_NO_RXE_OVERFLOW	__constant_cpu_to_le32(1 << 1)
+#define RX_RES_STATUS_NO_CRC32_ERROR	cpu_to_le32(1 << 0)
+#define RX_RES_STATUS_NO_RXE_OVERFLOW	cpu_to_le32(1 << 1)
 
-#define RX_RES_PHY_FLAGS_BAND_24_MSK	__constant_cpu_to_le16(1 << 0)
-#define RX_RES_PHY_FLAGS_MOD_CCK_MSK		__constant_cpu_to_le16(1 << 1)
-#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK	__constant_cpu_to_le16(1 << 2)
-#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK	__constant_cpu_to_le16(1 << 3)
-#define RX_RES_PHY_FLAGS_ANTENNA_MSK		__constant_cpu_to_le16(0xf0)
+#define RX_RES_PHY_FLAGS_BAND_24_MSK	cpu_to_le16(1 << 0)
+#define RX_RES_PHY_FLAGS_MOD_CCK_MSK		cpu_to_le16(1 << 1)
+#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK	cpu_to_le16(1 << 2)
+#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK	cpu_to_le16(1 << 3)
+#define RX_RES_PHY_FLAGS_ANTENNA_MSK		cpu_to_le16(0xf0)
 
 #define RX_RES_STATUS_SEC_TYPE_MSK	(0x7 << 8)
 #define RX_RES_STATUS_SEC_TYPE_NONE	(0x0 << 8)
@@ -733,57 +733,57 @@
 
 /* 1: Use Request-To-Send protocol before this frame.
  * Mutually exclusive vs. TX_CMD_FLG_CTS_MSK. */
-#define TX_CMD_FLG_RTS_MSK __constant_cpu_to_le32(1 << 1)
+#define TX_CMD_FLG_RTS_MSK cpu_to_le32(1 << 1)
 
 /* 1: Transmit Clear-To-Send to self before this frame.
  * Driver should set this for AUTH/DEAUTH/ASSOC-REQ/REASSOC mgmnt frames.
  * Mutually exclusive vs. TX_CMD_FLG_RTS_MSK. */
-#define TX_CMD_FLG_CTS_MSK __constant_cpu_to_le32(1 << 2)
+#define TX_CMD_FLG_CTS_MSK cpu_to_le32(1 << 2)
 
 /* 1: Expect ACK from receiving station
  * 0: Don't expect ACK (MAC header's duration field s/b 0)
  * Set this for unicast frames, but not broadcast/multicast. */
-#define TX_CMD_FLG_ACK_MSK __constant_cpu_to_le32(1 << 3)
+#define TX_CMD_FLG_ACK_MSK cpu_to_le32(1 << 3)
 
 /* 1: Use rate scale table (see REPLY_TX_LINK_QUALITY_CMD).
  *    Tx command's initial_rate_index indicates first rate to try;
  *    uCode walks through table for additional Tx attempts.
  * 0: Use Tx rate/MCS from Tx command's rate_n_flags field.
  *    This rate will be used for all Tx attempts; it will not be scaled. */
-#define TX_CMD_FLG_STA_RATE_MSK __constant_cpu_to_le32(1 << 4)
+#define TX_CMD_FLG_STA_RATE_MSK cpu_to_le32(1 << 4)
 
 /* 1: Expect immediate block-ack.
  * Set when Txing a block-ack request frame.  Also set TX_CMD_FLG_ACK_MSK. */
-#define TX_CMD_FLG_IMM_BA_RSP_MASK  __constant_cpu_to_le32(1 << 6)
+#define TX_CMD_FLG_IMM_BA_RSP_MASK  cpu_to_le32(1 << 6)
 
 /* 1: Frame requires full Tx-Op protection.
  * Set this if either RTS or CTS Tx Flag gets set. */
-#define TX_CMD_FLG_FULL_TXOP_PROT_MSK __constant_cpu_to_le32(1 << 7)
+#define TX_CMD_FLG_FULL_TXOP_PROT_MSK cpu_to_le32(1 << 7)
 
 /* Tx antenna selection field; used only for 3945, reserved (0) for 4965.
  * Set field to "0" to allow 3945 uCode to select antenna (normal usage). */
-#define TX_CMD_FLG_ANT_SEL_MSK __constant_cpu_to_le32(0xf00)
-#define TX_CMD_FLG_ANT_A_MSK __constant_cpu_to_le32(1 << 8)
-#define TX_CMD_FLG_ANT_B_MSK __constant_cpu_to_le32(1 << 9)
+#define TX_CMD_FLG_ANT_SEL_MSK cpu_to_le32(0xf00)
+#define TX_CMD_FLG_ANT_A_MSK cpu_to_le32(1 << 8)
+#define TX_CMD_FLG_ANT_B_MSK cpu_to_le32(1 << 9)
 
 /* 1: Ignore Bluetooth priority for this frame.
  * 0: Delay Tx until Bluetooth device is done (normal usage). */
-#define TX_CMD_FLG_BT_DIS_MSK __constant_cpu_to_le32(1 << 12)
+#define TX_CMD_FLG_BT_DIS_MSK cpu_to_le32(1 << 12)
 
 /* 1: uCode overrides sequence control field in MAC header.
  * 0: Driver provides sequence control field in MAC header.
  * Set this for management frames, non-QOS data frames, non-unicast frames,
  * and also in Tx command embedded in REPLY_SCAN_CMD for active scans. */
-#define TX_CMD_FLG_SEQ_CTL_MSK __constant_cpu_to_le32(1 << 13)
+#define TX_CMD_FLG_SEQ_CTL_MSK cpu_to_le32(1 << 13)
 
 /* 1: This frame is non-last MPDU; more fragments are coming.
  * 0: Last fragment, or not using fragmentation. */
-#define TX_CMD_FLG_MORE_FRAG_MSK __constant_cpu_to_le32(1 << 14)
+#define TX_CMD_FLG_MORE_FRAG_MSK cpu_to_le32(1 << 14)
 
 /* 1: uCode calculates and inserts Timestamp Function (TSF) in outgoing frame.
  * 0: No TSF required in outgoing frame.
  * Set this for transmitting beacons and probe responses. */
-#define TX_CMD_FLG_TSF_MSK __constant_cpu_to_le32(1 << 16)
+#define TX_CMD_FLG_TSF_MSK cpu_to_le32(1 << 16)
 
 /* 1: Driver inserted 2 bytes pad after the MAC header, for (required) dword
  *    alignment of frame's payload data field.
@@ -791,10 +791,10 @@
  * Set this for MAC headers with 26 or 30 bytes, i.e. those with QOS or ADDR4
  * field (but not both).  Driver must align frame data (i.e. data following
  * MAC header) to DWORD boundary. */
-#define TX_CMD_FLG_MH_PAD_MSK __constant_cpu_to_le32(1 << 20)
+#define TX_CMD_FLG_MH_PAD_MSK cpu_to_le32(1 << 20)
 
 /* HCCA-AP - disable duration overwriting. */
-#define TX_CMD_FLG_DUR_MSK __constant_cpu_to_le32(1 << 25)
+#define TX_CMD_FLG_DUR_MSK cpu_to_le32(1 << 25)
 
 /*
  * TX command security control
@@ -1158,9 +1158,9 @@
  */
 #define IWL_POWER_VEC_SIZE 5
 
-#define IWL_POWER_DRIVER_ALLOW_SLEEP_MSK	__constant_cpu_to_le32(1 << 0)
-#define IWL_POWER_SLEEP_OVER_DTIM_MSK		__constant_cpu_to_le32(1 << 2)
-#define IWL_POWER_PCI_PM_MSK			__constant_cpu_to_le32(1 << 3)
+#define IWL_POWER_DRIVER_ALLOW_SLEEP_MSK	cpu_to_le32(1 << 0)
+#define IWL_POWER_SLEEP_OVER_DTIM_MSK		cpu_to_le32(1 << 2)
+#define IWL_POWER_PCI_PM_MSK			cpu_to_le32(1 << 3)
 struct iwl3945_powertable_cmd {
 	__le32 flags;
 	__le32 rx_data_timeout;
@@ -1278,8 +1278,8 @@
 } __attribute__ ((packed));
 
 #define PROBE_OPTION_MAX        0x4
-#define TX_CMD_LIFE_TIME_INFINITE	__constant_cpu_to_le32(0xFFFFFFFF)
-#define IWL_GOOD_CRC_TH		__constant_cpu_to_le16(1)
+#define TX_CMD_LIFE_TIME_INFINITE	cpu_to_le32(0xFFFFFFFF)
+#define IWL_GOOD_CRC_TH		cpu_to_le16(1)
 #define IWL_MAX_SCAN_SIZE 1024
 
 /*
@@ -1379,7 +1379,7 @@
 } __attribute__ ((packed));
 
 /* Can abort will notify by complete notification with abort status. */
-#define CAN_ABORT_STATUS	__constant_cpu_to_le32(0x1)
+#define CAN_ABORT_STATUS	cpu_to_le32(0x1)
 /* complete notification statuses */
 #define ABORT_STATUS            0x2
 
@@ -1572,8 +1572,8 @@
  * STATISTICS_NOTIFICATIONs after received beacons (see below).  This flag
  * does not affect the response to the REPLY_STATISTICS_CMD 0x9c itself.
  */
-#define IWL_STATS_CONF_CLEAR_STATS __constant_cpu_to_le32(0x1)	/* see above */
-#define IWL_STATS_CONF_DISABLE_NOTIF __constant_cpu_to_le32(0x2)/* see above */
+#define IWL_STATS_CONF_CLEAR_STATS cpu_to_le32(0x1)	/* see above */
+#define IWL_STATS_CONF_DISABLE_NOTIF cpu_to_le32(0x2)/* see above */
 struct iwl3945_statistics_cmd {
 	__le32 configuration_flags;	/* IWL_STATS_CONF_* */
 } __attribute__ ((packed));
@@ -1593,8 +1593,8 @@
  * appropriately so that each notification contains statistics for only the
  * one channel that has just been scanned.
  */
-#define STATISTICS_REPLY_FLG_BAND_24G_MSK         __constant_cpu_to_le32(0x2)
-#define STATISTICS_REPLY_FLG_FAT_MODE_MSK         __constant_cpu_to_le32(0x8)
+#define STATISTICS_REPLY_FLG_BAND_24G_MSK         cpu_to_le32(0x2)
+#define STATISTICS_REPLY_FLG_FAT_MODE_MSK         cpu_to_le32(0x8)
 struct iwl3945_notif_statistics {
 	__le32 flag;
 	struct statistics_rx rx;