|  | /* | 
|  | * TI CDCE949 clock synthesizer driver | 
|  | * | 
|  | * Note: This implementation assumes an input of 27MHz to the CDCE. | 
|  | * This is by no means constrained by CDCE hardware although the datasheet | 
|  | * does use this as an example for all illustrations and more importantly: | 
|  | * that is the crystal input on boards it is currently used on. | 
|  | * | 
|  | * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/ | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | */ | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/i2c.h> | 
|  |  | 
|  | #include <mach/clock.h> | 
|  | #include <mach/cdce949.h> | 
|  |  | 
|  | #include "clock.h" | 
|  |  | 
|  | static struct i2c_client *cdce_i2c_client; | 
|  | static DEFINE_MUTEX(cdce_mutex); | 
|  |  | 
|  | /* CDCE register descriptor */ | 
|  | struct cdce_reg { | 
|  | u8	addr; | 
|  | u8	val; | 
|  | }; | 
|  |  | 
|  | /* Per-Output (Y1, Y2 etc.) frequency descriptor */ | 
|  | struct cdce_freq { | 
|  | /* Frequency in KHz */ | 
|  | unsigned long frequency; | 
|  | /* | 
|  | * List of registers to program to obtain a particular frequency. | 
|  | * 0x0 in register address and value is the end of list marker. | 
|  | */ | 
|  | struct cdce_reg *reglist; | 
|  | }; | 
|  |  | 
|  | #define CDCE_FREQ_TABLE_ENTRY(line, out)		\ | 
|  | {							\ | 
|  | .reglist	= cdce_y ##line## _ ##out,		\ | 
|  | .frequency	= out,				\ | 
|  | } | 
|  |  | 
|  | /* List of CDCE outputs  */ | 
|  | struct cdce_output { | 
|  | /* List of frequencies on this output */ | 
|  | struct cdce_freq *freq_table; | 
|  | /* Number of possible frequencies */ | 
|  | int size; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Finding out the values to program into CDCE949 registers for a particular | 
|  | * frequency output is not a simple calculation. Have a look at the datasheet | 
|  | * for the details. There is desktop software available to help users with | 
|  | * the calculations. Here, we just depend on the output of that software | 
|  | * (or hand calculations) instead trying to runtime calculate the register | 
|  | * values and inflicting misery on ourselves. | 
|  | */ | 
|  | static struct cdce_reg cdce_y1_148500[] = { | 
|  | { 0x13, 0x00 }, | 
|  | /* program PLL1_0 multiplier */ | 
|  | { 0x18, 0xaf }, | 
|  | { 0x19, 0x50 }, | 
|  | { 0x1a, 0x02 }, | 
|  | { 0x1b, 0xc9 }, | 
|  | /* program PLL1_11 multiplier */ | 
|  | { 0x1c, 0x00 }, | 
|  | { 0x1d, 0x40 }, | 
|  | { 0x1e, 0x02 }, | 
|  | { 0x1f, 0xc9 }, | 
|  | /* output state selection */ | 
|  | { 0x15, 0x00 }, | 
|  | { 0x14, 0xef }, | 
|  | /* switch MUX to PLL1 output */ | 
|  | { 0x14, 0x6f }, | 
|  | { 0x16, 0x06 }, | 
|  | /* set P2DIV divider, P3DIV and input crystal */ | 
|  | { 0x17, 0x06 }, | 
|  | { 0x01, 0x00 }, | 
|  | { 0x05, 0x48 }, | 
|  | { 0x02, 0x80 }, | 
|  | /* enable and disable PLL */ | 
|  | { 0x02, 0xbc }, | 
|  | { 0x03, 0x01 }, | 
|  | { }, | 
|  | }; | 
|  |  | 
|  | static struct cdce_reg cdce_y1_74250[] = { | 
|  | { 0x13, 0x00 }, | 
|  | { 0x18, 0xaf }, | 
|  | { 0x19, 0x50 }, | 
|  | { 0x1a, 0x02 }, | 
|  | { 0x1b, 0xc9 }, | 
|  | { 0x1c, 0x00 }, | 
|  | { 0x1d, 0x40 }, | 
|  | { 0x1e, 0x02 }, | 
|  | { 0x1f, 0xc9 }, | 
|  | /* output state selection */ | 
|  | { 0x15, 0x00 }, | 
|  | { 0x14, 0xef }, | 
|  | /* switch MUX to PLL1 output */ | 
|  | { 0x14, 0x6f }, | 
|  | { 0x16, 0x06 }, | 
|  | /* set P2DIV divider, P3DIV and input crystal */ | 
|  | { 0x17, 0x06 }, | 
|  | { 0x01, 0x00 }, | 
|  | { 0x05, 0x48 }, | 
|  | { 0x02, 0x80 }, | 
|  | /* enable and disable PLL */ | 
|  | { 0x02, 0xbc }, | 
|  | { 0x03, 0x02 }, | 
|  | { }, | 
|  | }; | 
|  |  | 
|  | static struct cdce_reg cdce_y1_27000[] = { | 
|  | { 0x13, 0x00 }, | 
|  | { 0x18, 0x00 }, | 
|  | { 0x19, 0x40 }, | 
|  | { 0x1a, 0x02 }, | 
|  | { 0x1b, 0x08 }, | 
|  | { 0x1c, 0x00 }, | 
|  | { 0x1d, 0x40 }, | 
|  | { 0x1e, 0x02 }, | 
|  | { 0x1f, 0x08 }, | 
|  | { 0x15, 0x02 }, | 
|  | { 0x14, 0xed }, | 
|  | { 0x16, 0x01 }, | 
|  | { 0x17, 0x01 }, | 
|  | { 0x01, 0x00 }, | 
|  | { 0x05, 0x50 }, | 
|  | { 0x02, 0xb4 }, | 
|  | { 0x03, 0x01 }, | 
|  | { }, | 
|  | }; | 
|  |  | 
|  | static struct cdce_freq cdce_y1_freqs[] = { | 
|  | CDCE_FREQ_TABLE_ENTRY(1, 148500), | 
|  | CDCE_FREQ_TABLE_ENTRY(1, 74250), | 
|  | CDCE_FREQ_TABLE_ENTRY(1, 27000), | 
|  | }; | 
|  |  | 
|  | static struct cdce_reg cdce_y5_13500[] = { | 
|  | { 0x27, 0x08 }, | 
|  | { 0x28, 0x00 }, | 
|  | { 0x29, 0x40 }, | 
|  | { 0x2a, 0x02 }, | 
|  | { 0x2b, 0x08 }, | 
|  | { 0x24, 0x6f }, | 
|  | { }, | 
|  | }; | 
|  |  | 
|  | static struct cdce_reg cdce_y5_16875[] = { | 
|  | { 0x27, 0x08 }, | 
|  | { 0x28, 0x9f }, | 
|  | { 0x29, 0xb0 }, | 
|  | { 0x2a, 0x02 }, | 
|  | { 0x2b, 0x89 }, | 
|  | { 0x24, 0x6f }, | 
|  | { }, | 
|  | }; | 
|  |  | 
|  | static struct cdce_reg cdce_y5_27000[] = { | 
|  | { 0x27, 0x04 }, | 
|  | { 0x28, 0x00 }, | 
|  | { 0x29, 0x40 }, | 
|  | { 0x2a, 0x02 }, | 
|  | { 0x2b, 0x08 }, | 
|  | { 0x24, 0x6f }, | 
|  | { }, | 
|  | }; | 
|  | static struct cdce_reg cdce_y5_54000[] = { | 
|  | { 0x27, 0x04 }, | 
|  | { 0x28, 0xff }, | 
|  | { 0x29, 0x80 }, | 
|  | { 0x2a, 0x02 }, | 
|  | { 0x2b, 0x07 }, | 
|  | { 0x24, 0x6f }, | 
|  | { }, | 
|  | }; | 
|  |  | 
|  | static struct cdce_reg cdce_y5_81000[] = { | 
|  | { 0x27, 0x02 }, | 
|  | { 0x28, 0xbf }, | 
|  | { 0x29, 0xa0 }, | 
|  | { 0x2a, 0x03 }, | 
|  | { 0x2b, 0x0a }, | 
|  | { 0x24, 0x6f }, | 
|  | { }, | 
|  | }; | 
|  |  | 
|  | static struct cdce_freq cdce_y5_freqs[] = { | 
|  | CDCE_FREQ_TABLE_ENTRY(5, 13500), | 
|  | CDCE_FREQ_TABLE_ENTRY(5, 16875), | 
|  | CDCE_FREQ_TABLE_ENTRY(5, 27000), | 
|  | CDCE_FREQ_TABLE_ENTRY(5, 54000), | 
|  | CDCE_FREQ_TABLE_ENTRY(5, 81000), | 
|  | }; | 
|  |  | 
|  |  | 
|  | static struct cdce_output output_list[] = { | 
|  | [1]	= { cdce_y1_freqs, ARRAY_SIZE(cdce_y1_freqs) }, | 
|  | [5]	= { cdce_y5_freqs, ARRAY_SIZE(cdce_y5_freqs) }, | 
|  | }; | 
|  |  | 
|  | int cdce_set_rate(struct clk *clk, unsigned long rate) | 
|  | { | 
|  | int i, ret = 0; | 
|  | struct cdce_freq *freq_table = output_list[clk->lpsc].freq_table; | 
|  | struct cdce_reg  *regs = NULL; | 
|  |  | 
|  | if (!cdce_i2c_client) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (!freq_table) | 
|  | return -EINVAL; | 
|  |  | 
|  | for (i = 0; i < output_list[clk->lpsc].size; i++) { | 
|  | if (freq_table[i].frequency == rate / 1000) { | 
|  | regs = freq_table[i].reglist; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!regs) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&cdce_mutex); | 
|  | for (i = 0; regs[i].addr; i++) { | 
|  | ret = i2c_smbus_write_byte_data(cdce_i2c_client, | 
|  | regs[i].addr | 0x80, regs[i].val); | 
|  | if (ret) | 
|  | break; | 
|  | } | 
|  | mutex_unlock(&cdce_mutex); | 
|  |  | 
|  | if (!ret) | 
|  | clk->rate = rate; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int cdce_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | cdce_i2c_client = client; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __devexit cdce_remove(struct i2c_client *client) | 
|  | { | 
|  | cdce_i2c_client = NULL; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id cdce_id[] = { | 
|  | {"cdce949", 0}, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, cdce_id); | 
|  |  | 
|  | static struct i2c_driver cdce_driver = { | 
|  | .driver = { | 
|  | .owner	= THIS_MODULE, | 
|  | .name	= "cdce949", | 
|  | }, | 
|  | .probe		= cdce_probe, | 
|  | .remove		= __devexit_p(cdce_remove), | 
|  | .id_table	= cdce_id, | 
|  | }; | 
|  |  | 
|  | static int __init cdce_init(void) | 
|  | { | 
|  | return i2c_add_driver(&cdce_driver); | 
|  | } | 
|  | subsys_initcall(cdce_init); | 
|  |  | 
|  | static void __exit cdce_exit(void) | 
|  | { | 
|  | i2c_del_driver(&cdce_driver); | 
|  | } | 
|  | module_exit(cdce_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Texas Instruments"); | 
|  | MODULE_DESCRIPTION("CDCE949 clock synthesizer driver"); | 
|  | MODULE_LICENSE("GPL v2"); |