[MTD] Fix module refcounting in NAND board drivers.
The _board_ driver needs to be mtd->owner, and it in turn pins the
nand.ko module. Fix them all to actually do that, and fix nand.ko not to
overwrite it -- and also to check that the caller sets it, if the caller
is a module.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 50cbfd4..87d3435 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -345,6 +345,7 @@
/* Link the private data with the MTD structure */
au1550_mtd->priv = this;
+ au1550_mtd->owner = THIS_MODULE;
/* disable interrupts */
au_writel(au_readl(MEM_STNDCTL) & ~(1 << 8), MEM_STNDCTL);
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index 9c9f21b..330deb0 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -154,6 +154,7 @@
/* Link the private data with the MTD structure */
autcpu12_mtd->priv = this;
+ autcpu12_mtd->owner = THIS_MODULE;
/* Set address of NAND IO lines */
this->IO_ADDR_R = autcpu12_fio_base;
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index fba7be5..d5b0551 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -223,6 +223,7 @@
/* Link the private data with the MTD structure */
new_mtd->priv = this;
+ new_mtd->owner = THIS_MODULE;
/* map physical address */
this->IO_ADDR_R = this->IO_ADDR_W = ioremap(adr, 4096);
@@ -255,7 +256,6 @@
goto out_ior;
}
- new_mtd->owner = THIS_MODULE;
cs553x_mtd[cs] = new_mtd;
goto out;
diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c
index 8467d77..ad4488a 100644
--- a/drivers/mtd/nand/edb7312.c
+++ b/drivers/mtd/nand/edb7312.c
@@ -148,6 +148,7 @@
/* Link the private data with the MTD structure */
ep7312_mtd->priv = this;
+ ep7312_mtd->owner = THIS_MODULE;
/*
* Set GPIO Port B control register so that the pins are configured
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
index efa53a9..b47a15c 100644
--- a/drivers/mtd/nand/h1910.c
+++ b/drivers/mtd/nand/h1910.c
@@ -135,6 +135,7 @@
/* Link the private data with the MTD structure */
h1910_nand_mtd->priv = this;
+ h1910_nand_mtd->owner = THIS_MODULE;
/*
* Enable VPEN
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index fdaf320..42cff0a 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -69,6 +69,7 @@
*
*/
+#include <linux/module.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/sched.h>
@@ -2316,11 +2317,12 @@
* @mtd: MTD device structure
* @maxchips: Number of chips to scan for
*
- * This fills out all the not initialized function pointers
+ * This fills out all the uninitialized function pointers
* with the defaults.
* The flash ID is read and the mtd/chip structures are
* filled with the appropriate values. Buffers are allocated if
* they are not provided by the board driver
+ * The mtd->owner field must be set to the module of the caller
*
*/
int nand_scan(struct mtd_info *mtd, int maxchips)
@@ -2328,6 +2330,16 @@
int i, nand_maf_id, nand_dev_id, busw, maf_id;
struct nand_chip *this = mtd->priv;
+ /* module_text_address() isn't exported. But if _this_ is a module,
+ it's a fairly safe bet that its caller is a module too... and
+ that means the call to module_text_address() gets optimised out
+ without having to resort to ifdefs */
+ if (!mtd->owner && (THIS_MODULE ||
+ module_text_address((unsigned long)__builtin_return_address(0)))) {
+ printk(KERN_CRIT "nand_scan() called with NULL mtd->owner!\n");
+ BUG();
+ }
+
/* Get buswidth to select the correct functions */
busw = this->options & NAND_BUSWIDTH_16;
@@ -2676,8 +2688,6 @@
/* and make the autooob the default one */
memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo));
- mtd->owner = THIS_MODULE;
-
/* Check, if we should skip the bad block table scan */
if (this->options & NAND_SKIP_BBTSCAN)
return 0;
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index a0af92c..6903f5b 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -1546,6 +1546,8 @@
chip->options |= NAND_BUSWIDTH_16;
}
+ nsmtd->owner = THIS_MODULE;
+
if ((retval = nand_scan(nsmtd, 1)) != 0) {
NS_ERR("can't register NAND Simulator\n");
if (retval > 0)
diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c
index 405beec..5d4d16f 100644
--- a/drivers/mtd/nand/ppchameleonevb.c
+++ b/drivers/mtd/nand/ppchameleonevb.c
@@ -221,6 +221,7 @@
/* Link the private data with the MTD structure */
ppchameleon_mtd->priv = this;
+ ppchameleon_mtd->owner = THIS_MODULE;
/* Initialize GPIOs */
/* Pin mapping for NAND chip */
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
index 1887989..0c56a66 100644
--- a/drivers/mtd/nand/rtc_from4.c
+++ b/drivers/mtd/nand/rtc_from4.c
@@ -538,6 +538,7 @@
/* Link the private data with the MTD structure */
rtc_from4_mtd->priv = this;
+ rtc_from4_mtd->owner = THIS_MODULE;
/* set area 5 as PCMCIA mode to clear the spec of tDH(Data hold time;9ns min) */
bcr1 = *SH77X9_BCR1 & ~0x0002;
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 338fda8..f800259 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -516,6 +516,7 @@
nmtd->info = info;
nmtd->mtd.priv = chip;
+ nmtd->mtd.owner = THIS_MODULE;
nmtd->set = set;
if (hardware_ecc) {
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index 25322a8..d375cb3 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -185,6 +185,7 @@
/* Link the private data with the MTD structure */
sharpsl_mtd->priv = this;
+ sharpsl_mtd->owner = THIS_MODULE;
/*
* PXA initialize
diff --git a/drivers/mtd/nand/spia.c b/drivers/mtd/nand/spia.c
index a11354b..b06aada 100644
--- a/drivers/mtd/nand/spia.c
+++ b/drivers/mtd/nand/spia.c
@@ -121,6 +121,7 @@
/* Link the private data with the MTD structure */
spia_mtd->priv = this;
+ spia_mtd->owner = THIS_MODULE;
/*
* Set GPIO Port E control register so that the pins are configured
diff --git a/drivers/mtd/nand/toto.c b/drivers/mtd/nand/toto.c
index e3a90e6..24cfa9e 100644
--- a/drivers/mtd/nand/toto.c
+++ b/drivers/mtd/nand/toto.c
@@ -137,6 +137,7 @@
/* Link the private data with the MTD structure */
toto_mtd->priv = this;
+ toto_mtd->owner = THIS_MODULE;
/* Set address of NAND IO lines */
this->IO_ADDR_R = toto_io_base;
diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c
index d2b7d57..756ef64 100644
--- a/drivers/mtd/nand/ts7250.c
+++ b/drivers/mtd/nand/ts7250.c
@@ -147,6 +147,7 @@
/* Link the private data with the MTD structure */
ts7250_mtd->priv = this;
+ ts7250_mtd->owner = THIS_MODULE;
/* insert callbacks */
this->IO_ADDR_R = (void *)TS72XX_NAND_DATA_VIRT_BASE;