[PATCH] powerpc: G4+ oprofile support
This patch adds oprofile support for the 7450 and all its multitudinous
derivatives.
* Added 7450 (and derivatives) support for oprofile
* Changed e500 cputable to have oprofile model and cpu_type fields
* Added support for classic 32-bit performance monitor interrupt
* Cleaned up common powerpc oprofile code to be as common as possible
* Cleaned up oprofile_impl.h to reflect 32 bit classic code
* Added 32-bit MMCRx bitfield definitions and SPR numbers
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/include/asm-powerpc/oprofile_impl.h b/include/asm-powerpc/oprofile_impl.h
index 8013cd2..b48d35e 100644
--- a/include/asm-powerpc/oprofile_impl.h
+++ b/include/asm-powerpc/oprofile_impl.h
@@ -22,24 +22,22 @@
unsigned long enabled;
unsigned long event;
unsigned long count;
+ /* Classic doesn't support per-counter user/kernel selection */
unsigned long kernel;
-#ifdef __powerpc64__
- /* We dont support per counter user/kernel selection */
-#endif
unsigned long user;
unsigned long unit_mask;
};
/* System-wide configuration as set via oprofilefs. */
struct op_system_config {
-#ifdef __powerpc64__
+#ifdef CONFIG_PPC64
unsigned long mmcr0;
unsigned long mmcr1;
unsigned long mmcra;
#endif
unsigned long enable_kernel;
unsigned long enable_user;
-#ifdef __powerpc64__
+#ifdef CONFIG_PPC64
unsigned long backtrace_spinlocks;
#endif
};
@@ -49,9 +47,7 @@
void (*reg_setup) (struct op_counter_config *,
struct op_system_config *,
int num_counters);
-#ifdef __powerpc64__
void (*cpu_setup) (void *);
-#endif
void (*start) (struct op_counter_config *);
void (*stop) (void);
void (*handle_interrupt) (struct pt_regs *,
@@ -59,10 +55,19 @@
int num_counters;
};
-#ifdef __powerpc64__
+#ifdef CONFIG_FSL_BOOKE
+extern struct op_powerpc_model op_model_fsl_booke;
+#else /* Otherwise, it's classic */
+
+#ifdef CONFIG_PPC64
extern struct op_powerpc_model op_model_rs64;
extern struct op_powerpc_model op_model_power4;
+#else /* Otherwise, CONFIG_PPC32 */
+extern struct op_powerpc_model op_model_7450;
+#endif
+
+/* All the classic PPC parts use these */
static inline unsigned int ctr_read(unsigned int i)
{
switch(i) {
@@ -78,10 +83,14 @@
return mfspr(SPRN_PMC5);
case 5:
return mfspr(SPRN_PMC6);
+
+/* No PPC32 chip has more than 6 so far */
+#ifdef CONFIG_PPC64
case 6:
return mfspr(SPRN_PMC7);
case 7:
return mfspr(SPRN_PMC8);
+#endif
default:
return 0;
}
@@ -108,16 +117,20 @@
case 5:
mtspr(SPRN_PMC6, val);
break;
+
+/* No PPC32 chip has more than 6, yet */
+#ifdef CONFIG_PPC64
case 6:
mtspr(SPRN_PMC7, val);
break;
case 7:
mtspr(SPRN_PMC8, val);
break;
+#endif
default:
break;
}
}
-#endif /* __powerpc64__ */
+#endif /* !CONFIG_FSL_BOOKE */
#endif /* _ASM_POWERPC_OPROFILE_IMPL_H */
diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h
index eb392d0..a9a7685 100644
--- a/include/asm-powerpc/reg.h
+++ b/include/asm-powerpc/reg.h
@@ -443,12 +443,35 @@
#define SPRN_SDAR 781
#else /* 32-bit */
-#define SPRN_MMCR0 0x3B8 /* Monitor Mode Control Register 0 */
-#define SPRN_MMCR1 0x3BC /* Monitor Mode Control Register 1 */
-#define SPRN_PMC1 0x3B9 /* Performance Counter Register 1 */
-#define SPRN_PMC2 0x3BA /* Performance Counter Register 2 */
-#define SPRN_PMC3 0x3BD /* Performance Counter Register 3 */
-#define SPRN_PMC4 0x3BE /* Performance Counter Register 4 */
+#define SPRN_MMCR0 952 /* Monitor Mode Control Register 0 */
+#define MMCR0_FC 0x80000000UL /* freeze counters */
+#define MMCR0_FCS 0x40000000UL /* freeze in supervisor state */
+#define MMCR0_FCP 0x20000000UL /* freeze in problem state */
+#define MMCR0_FCM1 0x10000000UL /* freeze counters while MSR mark = 1 */
+#define MMCR0_FCM0 0x08000000UL /* freeze counters while MSR mark = 0 */
+#define MMCR0_PMXE 0x04000000UL /* performance monitor exception enable */
+#define MMCR0_FCECE 0x02000000UL /* freeze ctrs on enabled cond or event */
+#define MMCR0_TBEE 0x00400000UL /* time base exception enable */
+#define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/
+#define MMCR0_PMCnCE 0x00004000UL /* count enable for all but PMC 1*/
+#define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */
+#define MMCR0_PMC1SEL 0x00001fc0UL /* PMC 1 Event */
+#define MMCR0_PMC2SEL 0x0000003fUL /* PMC 2 Event */
+
+#define SPRN_MMCR1 956
+#define MMCR1_PMC3SEL 0xf8000000UL /* PMC 3 Event */
+#define MMCR1_PMC4SEL 0x07c00000UL /* PMC 4 Event */
+#define MMCR1_PMC5SEL 0x003e0000UL /* PMC 5 Event */
+#define MMCR1_PMC6SEL 0x0001f800UL /* PMC 6 Event */
+#define SPRN_MMCR2 944
+#define SPRN_PMC1 953 /* Performance Counter Register 1 */
+#define SPRN_PMC2 954 /* Performance Counter Register 2 */
+#define SPRN_PMC3 957 /* Performance Counter Register 3 */
+#define SPRN_PMC4 958 /* Performance Counter Register 4 */
+#define SPRN_PMC5 945 /* Performance Counter Register 5 */
+#define SPRN_PMC6 946 /* Performance Counter Register 6 */
+
+#define SPRN_SIAR 955 /* Sampled Instruction Address Register */
/* Bit definitions for MMCR0 and PMC1 / PMC2. */
#define MMCR0_PMC1_CYCLES (1 << 7)
@@ -458,7 +481,6 @@
#define MMCR0_PMC2_CYCLES 0x1
#define MMCR0_PMC2_ITLB 0x7
#define MMCR0_PMC2_LOADMISSTIME 0x5
-#define MMCR0_PMXE (1 << 26)
#endif
/* Processor Version Register (PVR) field extraction */