[MIPS] Rewrite GALILEO_INL/GALILEO_OUTL to GT_READ/GT_WRITE
This patch has rewritten GALILEO_INL/GALILEO_OUTL using GT_READ/GT_WRITE.
This patch tested on Cobalt Qube2.
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/include/asm-mips/mach-cobalt/cobalt.h b/include/asm-mips/mach-cobalt/cobalt.h
index b3c5ecb..00b0fc6 100644
--- a/include/asm-mips/mach-cobalt/cobalt.h
+++ b/include/asm-mips/mach-cobalt/cobalt.h
@@ -67,34 +67,9 @@
#define COBALT_BRD_ID_QUBE2 0x5
#define COBALT_BRD_ID_RAQ2 0x6
-/*
- * Galileo chipset access macros for the Cobalt. The base address for
- * the GT64111 chip is 0x14000000
- *
- * Most of this really should go into a separate GT64111 header file.
- */
-#define GT64111_IO_BASE 0x10000000UL
-#define GT64111_IO_END 0x11ffffffUL
-#define GT64111_MEM_BASE 0x12000000UL
-#define GT64111_MEM_END 0x13ffffffUL
-#define GT64111_BASE 0x14000000UL
-#define GALILEO_REG(ofs) CKSEG1ADDR(GT64111_BASE + (unsigned long)(ofs))
-
-#define GALILEO_INL(port) (*(volatile unsigned int *) GALILEO_REG(port))
-#define GALILEO_OUTL(val, port) \
-do { \
- *(volatile unsigned int *) GALILEO_REG(port) = (val); \
-} while (0)
-
-#define GALILEO_INTR_T0EXP (1 << 8)
-#define GALILEO_INTR_RETRY_CTR (1 << 20)
-
-#define GALILEO_ENTC0 0x01
-#define GALILEO_SELTC0 0x02
-
#define PCI_CFG_SET(devfn,where) \
- GALILEO_OUTL((0x80000000 | (PCI_SLOT (devfn) << 11) | \
- (PCI_FUNC (devfn) << 8) | (where)), GT_PCI0_CFGADDR_OFS)
+ GT_WRITE(GT_PCI0_CFGADDR_OFS, (0x80000000 | (PCI_SLOT (devfn) << 11) | \
+ (PCI_FUNC (devfn) << 8) | (where)))
#define COBALT_LED_PORT (*(volatile unsigned char *) CKSEG1ADDR(0x1c000000))
# define COBALT_LED_BAR_LEFT (1 << 0) /* Qube */