[POWERPC] Make pci_read_irq_line the default on mpc7448hpc2 board
The following patch adds a tsi108/9 pci interrupt controller host.
On mpc7448hpc2 board, pci_irq_fixup function is removed, which makes the
pci_read_irq_line be the default pci irq fixup.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts
index d7b985e..c4d9562 100644
--- a/arch/powerpc/boot/dts/mpc7448hpc2.dts
+++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
@@ -161,29 +161,41 @@
interrupt-map = <
/* IDSEL 0x11 */
- 0800 0 0 1 7400 24 0
- 0800 0 0 2 7400 25 0
- 0800 0 0 3 7400 26 0
- 0800 0 0 4 7400 27 0
+ 0800 0 0 1 1180 24 0
+ 0800 0 0 2 1180 25 0
+ 0800 0 0 3 1180 26 0
+ 0800 0 0 4 1180 27 0
/* IDSEL 0x12 */
- 1000 0 0 1 7400 25 0
- 1000 0 0 2 7400 26 0
- 1000 0 0 3 7400 27 0
- 1000 0 0 4 7400 24 0
+ 1000 0 0 1 1180 25 0
+ 1000 0 0 2 1180 26 0
+ 1000 0 0 3 1180 27 0
+ 1000 0 0 4 1180 24 0
/* IDSEL 0x13 */
- 1800 0 0 1 7400 26 0
- 1800 0 0 2 7400 27 0
- 1800 0 0 3 7400 24 0
- 1800 0 0 4 7400 25 0
+ 1800 0 0 1 1180 26 0
+ 1800 0 0 2 1180 27 0
+ 1800 0 0 3 1180 24 0
+ 1800 0 0 4 1180 25 0
/* IDSEL 0x14 */
- 2000 0 0 1 7400 27 0
- 2000 0 0 2 7400 24 0
- 2000 0 0 3 7400 25 0
- 2000 0 0 4 7400 26 0
+ 2000 0 0 1 1180 27 0
+ 2000 0 0 2 1180 24 0
+ 2000 0 0 3 1180 25 0
+ 2000 0 0 4 1180 26 0
>;
+ router@1180 {
+ linux,phandle = <1180>;
+ clock-frequency = <0>;
+ interrupt-controller;
+ device_type = "pic-router";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ built-in;
+ big-endian;
+ interrupts = <17 2>;
+ interrupt-parent = <7400>;
+ };
};
};