[POWERPC] Removed hardcoded phandles from dts
Remove explicit phandles and move to using references that autogenerate the
phandles when needed.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts
index 6fa3754..765c306 100644
--- a/arch/powerpc/boot/dts/mpc7448hpc2.dts
+++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
@@ -16,12 +16,10 @@
compatible = "mpc74xx";
#address-cells = <1>;
#size-cells = <1>;
- linux,phandle = <100>;
cpus {
#address-cells = <1>;
#size-cells =<0>;
- linux,phandle = <200>;
PowerPC,7448@0 {
device_type = "cpu";
@@ -34,13 +32,11 @@
clock-frequency = <0>; // From U-Boot
bus-frequency = <0>; // From U-Boot
32-bit;
- linux,phandle = <201>;
};
};
memory {
device_type = "memory";
- linux,phandle = <300>;
reg = <00000000 20000000 // DDR2 512M at 0
>;
};
@@ -55,7 +51,7 @@
bus-frequency = <0>;
i2c@7000 {
- interrupt-parent = <7400>;
+ interrupt-parent = <&mpic>;
interrupts = <E 0>;
reg = <7000 400>;
device_type = "i2c";
@@ -66,18 +62,16 @@
device_type = "mdio";
compatible = "tsi-ethernet";
- ethernet-phy@6000 {
- linux,phandle = <6000>;
- interrupt-parent = <7400>;
+ phy8: ethernet-phy@6000 {
+ interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <6000 50>;
phy-id = <8>;
device_type = "ethernet-phy";
};
- ethernet-phy@6400 {
- linux,phandle = <6400>;
- interrupt-parent = <7400>;
+ phy9: ethernet-phy@6400 {
+ interrupt-parent = <&mpic>;
interrupts = <2 1>;
reg = <6000 50>;
phy-id = <9>;
@@ -94,8 +88,8 @@
reg = <6000 200>;
address = [ 00 06 D2 00 00 01 ];
interrupts = <10 2>;
- interrupt-parent = <7400>;
- phy-handle = <6000>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy8>;
};
ethernet@6600 {
@@ -107,8 +101,8 @@
reg = <6400 200>;
address = [ 00 06 D2 00 00 02 ];
interrupts = <11 2>;
- interrupt-parent = <7400>;
- phy-handle = <6400>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy9>;
};
serial@7808 {
@@ -117,7 +111,7 @@
reg = <7808 200>;
clock-frequency = <3f6b5a00>;
interrupts = <c 0>;
- interrupt-parent = <7400>;
+ interrupt-parent = <&mpic>;
};
serial@7c08 {
@@ -126,11 +120,10 @@
reg = <7c08 200>;
clock-frequency = <3f6b5a00>;
interrupts = <d 0>;
- interrupt-parent = <7400>;
+ interrupt-parent = <&mpic>;
};
- pic@7400 {
- linux,phandle = <7400>;
+ mpic: pic@7400 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
@@ -144,7 +137,6 @@
pci@1000 {
compatible = "tsi10x";
device_type = "pci";
- linux,phandle = <1000>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
@@ -153,37 +145,37 @@
ranges = <02000000 0 e0000000 e0000000 0 1A000000
01000000 0 00000000 fa000000 0 00010000>;
clock-frequency = <7f28154>;
- interrupt-parent = <7400>;
+ interrupt-parent = <&mpic>;
interrupts = <17 2>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 */
- 0800 0 0 1 1180 24 0
- 0800 0 0 2 1180 25 0
- 0800 0 0 3 1180 26 0
- 0800 0 0 4 1180 27 0
+ 0800 0 0 1 &RT0 24 0
+ 0800 0 0 2 &RT0 25 0
+ 0800 0 0 3 &RT0 26 0
+ 0800 0 0 4 &RT0 27 0
/* IDSEL 0x12 */
- 1000 0 0 1 1180 25 0
- 1000 0 0 2 1180 26 0
- 1000 0 0 3 1180 27 0
- 1000 0 0 4 1180 24 0
+ 1000 0 0 1 &RT0 25 0
+ 1000 0 0 2 &RT0 26 0
+ 1000 0 0 3 &RT0 27 0
+ 1000 0 0 4 &RT0 24 0
/* IDSEL 0x13 */
- 1800 0 0 1 1180 26 0
- 1800 0 0 2 1180 27 0
- 1800 0 0 3 1180 24 0
- 1800 0 0 4 1180 25 0
+ 1800 0 0 1 &RT0 26 0
+ 1800 0 0 2 &RT0 27 0
+ 1800 0 0 3 &RT0 24 0
+ 1800 0 0 4 &RT0 25 0
/* IDSEL 0x14 */
- 2000 0 0 1 1180 27 0
- 2000 0 0 2 1180 24 0
- 2000 0 0 3 1180 25 0
- 2000 0 0 4 1180 26 0
+ 2000 0 0 1 &RT0 27 0
+ 2000 0 0 2 &RT0 24 0
+ 2000 0 0 3 &RT0 25 0
+ 2000 0 0 4 &RT0 26 0
>;
- router@1180 {
- linux,phandle = <1180>;
+
+ RT0: router@1180 {
clock-frequency = <0>;
interrupt-controller;
device_type = "pic-router";
@@ -192,7 +184,7 @@
built-in;
big-endian;
interrupts = <17 2>;
- interrupt-parent = <7400>;
+ interrupt-parent = <&mpic>;
};
};
};