| /* | 
 |     Copyright (c) 2000  Frodo Looijaard <frodol@dds.nl>,  | 
 |                         Philip Edelbrock <phil@netroedge.com>, | 
 |                         Dan Eaton <dan.eaton@rocketlogix.com> | 
 |     Ported to Linux 2.6 by Aurelien Jarno <aurel32@debian.org> with  | 
 |     the help of Jean Delvare <khali@linux-fr.org> | 
 |  | 
 |     This program is free software; you can redistribute it and/or modify | 
 |     it under the terms of the GNU General Public License as published by | 
 |     the Free Software Foundation; either version 2 of the License, or | 
 |     (at your option) any later version. | 
 |      | 
 |     This program is distributed in the hope that it will be useful, | 
 |     but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |     GNU General Public License for more details. | 
 |  | 
 |     You should have received a copy of the GNU General Public License | 
 |     along with this program; if not, write to the Free Software | 
 |     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
 | */ | 
 |  | 
 | /* A few notes about the PCF8574: | 
 |  | 
 | * The PCF8574 is an 8-bit I/O expander for the I2C bus produced by | 
 |   Philips Semiconductors.  It is designed to provide a byte I2C | 
 |   interface to up to 8 separate devices. | 
 |    | 
 | * The PCF8574 appears as a very simple SMBus device which can be | 
 |   read from or written to with SMBUS byte read/write accesses. | 
 |  | 
 |   --Dan | 
 |  | 
 | */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/i2c.h> | 
 |  | 
 | /* Addresses to scan: none, device can't be detected */ | 
 | static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; | 
 |  | 
 | /* Insmod parameters */ | 
 | I2C_CLIENT_INSMOD_2(pcf8574, pcf8574a); | 
 |  | 
 | /* Each client has this additional data */ | 
 | struct pcf8574_data { | 
 | 	int write;			/* Remember last written value */ | 
 | }; | 
 |  | 
 | static void pcf8574_init_client(struct i2c_client *client); | 
 |  | 
 | /* following are the sysfs callback functions */ | 
 | static ssize_t show_read(struct device *dev, struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 	return sprintf(buf, "%u\n", i2c_smbus_read_byte(client)); | 
 | } | 
 |  | 
 | static DEVICE_ATTR(read, S_IRUGO, show_read, NULL); | 
 |  | 
 | static ssize_t show_write(struct device *dev, struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct pcf8574_data *data = i2c_get_clientdata(to_i2c_client(dev)); | 
 |  | 
 | 	if (data->write < 0) | 
 | 		return data->write; | 
 |  | 
 | 	return sprintf(buf, "%d\n", data->write); | 
 | } | 
 |  | 
 | static ssize_t set_write(struct device *dev, struct device_attribute *attr, const char *buf, | 
 | 			 size_t count) | 
 | { | 
 | 	struct i2c_client *client = to_i2c_client(dev); | 
 | 	struct pcf8574_data *data = i2c_get_clientdata(client); | 
 | 	unsigned long val = simple_strtoul(buf, NULL, 10); | 
 |  | 
 | 	if (val > 0xff) | 
 | 		return -EINVAL; | 
 |  | 
 | 	data->write = val; | 
 | 	i2c_smbus_write_byte(client, data->write); | 
 | 	return count; | 
 | } | 
 |  | 
 | static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write); | 
 |  | 
 | static struct attribute *pcf8574_attributes[] = { | 
 | 	&dev_attr_read.attr, | 
 | 	&dev_attr_write.attr, | 
 | 	NULL | 
 | }; | 
 |  | 
 | static const struct attribute_group pcf8574_attr_group = { | 
 | 	.attrs = pcf8574_attributes, | 
 | }; | 
 |  | 
 | /* | 
 |  * Real code | 
 |  */ | 
 |  | 
 | /* Return 0 if detection is successful, -ENODEV otherwise */ | 
 | static int pcf8574_detect(struct i2c_client *client, int kind, | 
 | 			  struct i2c_board_info *info) | 
 | { | 
 | 	struct i2c_adapter *adapter = client->adapter; | 
 | 	const char *client_name; | 
 |  | 
 | 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* Now, we would do the remaining detection. But the PCF8574 is plainly | 
 | 	   impossible to detect! Stupid chip. */ | 
 |  | 
 | 	/* Determine the chip type */ | 
 | 	if (kind <= 0) { | 
 | 		if (client->addr >= 0x38 && client->addr <= 0x3f) | 
 | 			kind = pcf8574a; | 
 | 		else | 
 | 			kind = pcf8574; | 
 | 	} | 
 |  | 
 | 	if (kind == pcf8574a) | 
 | 		client_name = "pcf8574a"; | 
 | 	else | 
 | 		client_name = "pcf8574"; | 
 | 	strlcpy(info->type, client_name, I2C_NAME_SIZE); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int pcf8574_probe(struct i2c_client *client, | 
 | 			 const struct i2c_device_id *id) | 
 | { | 
 | 	struct pcf8574_data *data; | 
 | 	int err; | 
 |  | 
 | 	data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL); | 
 | 	if (!data) { | 
 | 		err = -ENOMEM; | 
 | 		goto exit; | 
 | 	} | 
 |  | 
 | 	i2c_set_clientdata(client, data); | 
 |  | 
 | 	/* Initialize the PCF8574 chip */ | 
 | 	pcf8574_init_client(client); | 
 |  | 
 | 	/* Register sysfs hooks */ | 
 | 	err = sysfs_create_group(&client->dev.kobj, &pcf8574_attr_group); | 
 | 	if (err) | 
 | 		goto exit_free; | 
 | 	return 0; | 
 |  | 
 |       exit_free: | 
 | 	kfree(data); | 
 |       exit: | 
 | 	return err; | 
 | } | 
 |  | 
 | static int pcf8574_remove(struct i2c_client *client) | 
 | { | 
 | 	sysfs_remove_group(&client->dev.kobj, &pcf8574_attr_group); | 
 | 	kfree(i2c_get_clientdata(client)); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Called when we have found a new PCF8574. */ | 
 | static void pcf8574_init_client(struct i2c_client *client) | 
 | { | 
 | 	struct pcf8574_data *data = i2c_get_clientdata(client); | 
 | 	data->write = -EAGAIN; | 
 | } | 
 |  | 
 | static const struct i2c_device_id pcf8574_id[] = { | 
 | 	{ "pcf8574", 0 }, | 
 | 	{ "pcf8574a", 0 }, | 
 | 	{ } | 
 | }; | 
 |  | 
 | static struct i2c_driver pcf8574_driver = { | 
 | 	.driver = { | 
 | 		.name	= "pcf8574", | 
 | 	}, | 
 | 	.probe		= pcf8574_probe, | 
 | 	.remove		= pcf8574_remove, | 
 | 	.id_table	= pcf8574_id, | 
 |  | 
 | 	.detect		= pcf8574_detect, | 
 | 	.address_data	= &addr_data, | 
 | }; | 
 |  | 
 | static int __init pcf8574_init(void) | 
 | { | 
 | 	return i2c_add_driver(&pcf8574_driver); | 
 | } | 
 |  | 
 | static void __exit pcf8574_exit(void) | 
 | { | 
 | 	i2c_del_driver(&pcf8574_driver); | 
 | } | 
 |  | 
 |  | 
 | MODULE_AUTHOR | 
 |     ("Frodo Looijaard <frodol@dds.nl>, " | 
 |      "Philip Edelbrock <phil@netroedge.com>, " | 
 |      "Dan Eaton <dan.eaton@rocketlogix.com> " | 
 |      "and Aurelien Jarno <aurelien@aurel32.net>"); | 
 | MODULE_DESCRIPTION("PCF8574 driver"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | module_init(pcf8574_init); | 
 | module_exit(pcf8574_exit); |