|  | /* | 
|  | * Intel Wireless Multicomm 3200 WiFi driver | 
|  | * | 
|  | * Copyright (C) 2009 Intel Corporation <ilw@linux.intel.com> | 
|  | * Samuel Ortiz <samuel.ortiz@intel.com> | 
|  | * Zhu Yi <yi.zhu@intel.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License version | 
|  | * 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA | 
|  | * 02110-1301, USA. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/wireless.h> | 
|  | #include <linux/ieee80211.h> | 
|  | #include <net/cfg80211.h> | 
|  |  | 
|  | #include "iwm.h" | 
|  | #include "commands.h" | 
|  | #include "cfg80211.h" | 
|  | #include "debug.h" | 
|  |  | 
|  | #define RATETAB_ENT(_rate, _rateid, _flags) \ | 
|  | {								\ | 
|  | .bitrate	= (_rate),				\ | 
|  | .hw_value	= (_rateid),				\ | 
|  | .flags		= (_flags),				\ | 
|  | } | 
|  |  | 
|  | #define CHAN2G(_channel, _freq, _flags) {			\ | 
|  | .band			= IEEE80211_BAND_2GHZ,		\ | 
|  | .center_freq		= (_freq),			\ | 
|  | .hw_value		= (_channel),			\ | 
|  | .flags			= (_flags),			\ | 
|  | .max_antenna_gain	= 0,				\ | 
|  | .max_power		= 30,				\ | 
|  | } | 
|  |  | 
|  | #define CHAN5G(_channel, _flags) {				\ | 
|  | .band			= IEEE80211_BAND_5GHZ,		\ | 
|  | .center_freq		= 5000 + (5 * (_channel)),	\ | 
|  | .hw_value		= (_channel),			\ | 
|  | .flags			= (_flags),			\ | 
|  | .max_antenna_gain	= 0,				\ | 
|  | .max_power		= 30,				\ | 
|  | } | 
|  |  | 
|  | static struct ieee80211_rate iwm_rates[] = { | 
|  | RATETAB_ENT(10,  0x1,   0), | 
|  | RATETAB_ENT(20,  0x2,   0), | 
|  | RATETAB_ENT(55,  0x4,   0), | 
|  | RATETAB_ENT(110, 0x8,   0), | 
|  | RATETAB_ENT(60,  0x10,  0), | 
|  | RATETAB_ENT(90,  0x20,  0), | 
|  | RATETAB_ENT(120, 0x40,  0), | 
|  | RATETAB_ENT(180, 0x80,  0), | 
|  | RATETAB_ENT(240, 0x100, 0), | 
|  | RATETAB_ENT(360, 0x200, 0), | 
|  | RATETAB_ENT(480, 0x400, 0), | 
|  | RATETAB_ENT(540, 0x800, 0), | 
|  | }; | 
|  |  | 
|  | #define iwm_a_rates		(iwm_rates + 4) | 
|  | #define iwm_a_rates_size	8 | 
|  | #define iwm_g_rates		(iwm_rates + 0) | 
|  | #define iwm_g_rates_size	12 | 
|  |  | 
|  | static struct ieee80211_channel iwm_2ghz_channels[] = { | 
|  | CHAN2G(1, 2412, 0), | 
|  | CHAN2G(2, 2417, 0), | 
|  | CHAN2G(3, 2422, 0), | 
|  | CHAN2G(4, 2427, 0), | 
|  | CHAN2G(5, 2432, 0), | 
|  | CHAN2G(6, 2437, 0), | 
|  | CHAN2G(7, 2442, 0), | 
|  | CHAN2G(8, 2447, 0), | 
|  | CHAN2G(9, 2452, 0), | 
|  | CHAN2G(10, 2457, 0), | 
|  | CHAN2G(11, 2462, 0), | 
|  | CHAN2G(12, 2467, 0), | 
|  | CHAN2G(13, 2472, 0), | 
|  | CHAN2G(14, 2484, 0), | 
|  | }; | 
|  |  | 
|  | static struct ieee80211_channel iwm_5ghz_a_channels[] = { | 
|  | CHAN5G(34, 0),		CHAN5G(36, 0), | 
|  | CHAN5G(38, 0),		CHAN5G(40, 0), | 
|  | CHAN5G(42, 0),		CHAN5G(44, 0), | 
|  | CHAN5G(46, 0),		CHAN5G(48, 0), | 
|  | CHAN5G(52, 0),		CHAN5G(56, 0), | 
|  | CHAN5G(60, 0),		CHAN5G(64, 0), | 
|  | CHAN5G(100, 0),		CHAN5G(104, 0), | 
|  | CHAN5G(108, 0),		CHAN5G(112, 0), | 
|  | CHAN5G(116, 0),		CHAN5G(120, 0), | 
|  | CHAN5G(124, 0),		CHAN5G(128, 0), | 
|  | CHAN5G(132, 0),		CHAN5G(136, 0), | 
|  | CHAN5G(140, 0),		CHAN5G(149, 0), | 
|  | CHAN5G(153, 0),		CHAN5G(157, 0), | 
|  | CHAN5G(161, 0),		CHAN5G(165, 0), | 
|  | CHAN5G(184, 0),		CHAN5G(188, 0), | 
|  | CHAN5G(192, 0),		CHAN5G(196, 0), | 
|  | CHAN5G(200, 0),		CHAN5G(204, 0), | 
|  | CHAN5G(208, 0),		CHAN5G(212, 0), | 
|  | CHAN5G(216, 0), | 
|  | }; | 
|  |  | 
|  | static struct ieee80211_supported_band iwm_band_2ghz = { | 
|  | .channels = iwm_2ghz_channels, | 
|  | .n_channels = ARRAY_SIZE(iwm_2ghz_channels), | 
|  | .bitrates = iwm_g_rates, | 
|  | .n_bitrates = iwm_g_rates_size, | 
|  | }; | 
|  |  | 
|  | static struct ieee80211_supported_band iwm_band_5ghz = { | 
|  | .channels = iwm_5ghz_a_channels, | 
|  | .n_channels = ARRAY_SIZE(iwm_5ghz_a_channels), | 
|  | .bitrates = iwm_a_rates, | 
|  | .n_bitrates = iwm_a_rates_size, | 
|  | }; | 
|  |  | 
|  | int iwm_cfg80211_inform_bss(struct iwm_priv *iwm) | 
|  | { | 
|  | struct wiphy *wiphy = iwm_to_wiphy(iwm); | 
|  | struct iwm_bss_info *bss, *next; | 
|  | struct iwm_umac_notif_bss_info *umac_bss; | 
|  | struct ieee80211_mgmt *mgmt; | 
|  | struct ieee80211_channel *channel; | 
|  | struct ieee80211_supported_band *band; | 
|  | s32 signal; | 
|  | int freq; | 
|  |  | 
|  | list_for_each_entry_safe(bss, next, &iwm->bss_list, node) { | 
|  | umac_bss = bss->bss; | 
|  | mgmt = (struct ieee80211_mgmt *)(umac_bss->frame_buf); | 
|  |  | 
|  | if (umac_bss->band == UMAC_BAND_2GHZ) | 
|  | band = wiphy->bands[IEEE80211_BAND_2GHZ]; | 
|  | else if (umac_bss->band == UMAC_BAND_5GHZ) | 
|  | band = wiphy->bands[IEEE80211_BAND_5GHZ]; | 
|  | else { | 
|  | IWM_ERR(iwm, "Invalid band: %d\n", umac_bss->band); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | freq = ieee80211_channel_to_frequency(umac_bss->channel); | 
|  | channel = ieee80211_get_channel(wiphy, freq); | 
|  | signal = umac_bss->rssi * 100; | 
|  |  | 
|  | if (!cfg80211_inform_bss_frame(wiphy, channel, mgmt, | 
|  | le16_to_cpu(umac_bss->frame_len), | 
|  | signal, GFP_KERNEL)) | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwm_cfg80211_change_iface(struct wiphy *wiphy, int ifindex, | 
|  | enum nl80211_iftype type, u32 *flags, | 
|  | struct vif_params *params) | 
|  | { | 
|  | struct net_device *ndev; | 
|  | struct wireless_dev *wdev; | 
|  | struct iwm_priv *iwm; | 
|  | u32 old_mode; | 
|  |  | 
|  | /* we're under RTNL */ | 
|  | ndev = __dev_get_by_index(&init_net, ifindex); | 
|  | if (!ndev) | 
|  | return -ENODEV; | 
|  |  | 
|  | wdev = ndev->ieee80211_ptr; | 
|  | iwm = ndev_to_iwm(ndev); | 
|  | old_mode = iwm->conf.mode; | 
|  |  | 
|  | switch (type) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | iwm->conf.mode = UMAC_MODE_BSS; | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | iwm->conf.mode = UMAC_MODE_IBSS; | 
|  | break; | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | wdev->iftype = type; | 
|  |  | 
|  | if ((old_mode == iwm->conf.mode) || !iwm->umac_profile) | 
|  | return 0; | 
|  |  | 
|  | iwm->umac_profile->mode = cpu_to_le32(iwm->conf.mode); | 
|  |  | 
|  | if (iwm->umac_profile_active) { | 
|  | int ret = iwm_invalidate_mlme_profile(iwm); | 
|  | if (ret < 0) | 
|  | IWM_ERR(iwm, "Couldn't invalidate profile\n"); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwm_cfg80211_scan(struct wiphy *wiphy, struct net_device *ndev, | 
|  | struct cfg80211_scan_request *request) | 
|  | { | 
|  | struct iwm_priv *iwm = ndev_to_iwm(ndev); | 
|  | int ret; | 
|  |  | 
|  | if (!test_bit(IWM_STATUS_READY, &iwm->status)) { | 
|  | IWM_ERR(iwm, "Scan while device is not ready\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | if (test_bit(IWM_STATUS_SCANNING, &iwm->status)) { | 
|  | IWM_ERR(iwm, "Scanning already\n"); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | if (test_bit(IWM_STATUS_SCAN_ABORTING, &iwm->status)) { | 
|  | IWM_ERR(iwm, "Scanning being aborted\n"); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | set_bit(IWM_STATUS_SCANNING, &iwm->status); | 
|  |  | 
|  | ret = iwm_scan_ssids(iwm, request->ssids, request->n_ssids); | 
|  | if (ret) { | 
|  | clear_bit(IWM_STATUS_SCANNING, &iwm->status); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | iwm->scan_request = request; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwm_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed) | 
|  | { | 
|  | struct iwm_priv *iwm = wiphy_to_iwm(wiphy); | 
|  |  | 
|  | if (changed & WIPHY_PARAM_RTS_THRESHOLD && | 
|  | (iwm->conf.rts_threshold != wiphy->rts_threshold)) { | 
|  | int ret; | 
|  |  | 
|  | iwm->conf.rts_threshold = wiphy->rts_threshold; | 
|  |  | 
|  | ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX, | 
|  | CFG_RTS_THRESHOLD, | 
|  | iwm->conf.rts_threshold); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (changed & WIPHY_PARAM_FRAG_THRESHOLD && | 
|  | (iwm->conf.frag_threshold != wiphy->frag_threshold)) { | 
|  | int ret; | 
|  |  | 
|  | iwm->conf.frag_threshold = wiphy->frag_threshold; | 
|  |  | 
|  | ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_FA_CFG_FIX, | 
|  | CFG_FRAG_THRESHOLD, | 
|  | iwm->conf.frag_threshold); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwm_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *dev, | 
|  | struct cfg80211_ibss_params *params) | 
|  | { | 
|  | struct iwm_priv *iwm = wiphy_to_iwm(wiphy); | 
|  | struct ieee80211_channel *chan = params->channel; | 
|  | struct cfg80211_bss *bss; | 
|  |  | 
|  | if (!test_bit(IWM_STATUS_READY, &iwm->status)) | 
|  | return -EIO; | 
|  |  | 
|  | /* UMAC doesn't support creating IBSS network with specified bssid. | 
|  | * This should be removed after we have join only mode supported. */ | 
|  | if (params->bssid) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | bss = cfg80211_get_ibss(iwm_to_wiphy(iwm), NULL, | 
|  | params->ssid, params->ssid_len); | 
|  | if (!bss) { | 
|  | iwm_scan_one_ssid(iwm, params->ssid, params->ssid_len); | 
|  | schedule_timeout_interruptible(2 * HZ); | 
|  | bss = cfg80211_get_ibss(iwm_to_wiphy(iwm), NULL, | 
|  | params->ssid, params->ssid_len); | 
|  | } | 
|  | /* IBSS join only mode is not supported by UMAC ATM */ | 
|  | if (bss) { | 
|  | cfg80211_put_bss(bss); | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | iwm->channel = ieee80211_frequency_to_channel(chan->center_freq); | 
|  | iwm->umac_profile->ibss.band = chan->band; | 
|  | iwm->umac_profile->ibss.channel = iwm->channel; | 
|  | iwm->umac_profile->ssid.ssid_len = params->ssid_len; | 
|  | memcpy(iwm->umac_profile->ssid.ssid, params->ssid, params->ssid_len); | 
|  |  | 
|  | if (params->bssid) | 
|  | memcpy(&iwm->umac_profile->bssid[0], params->bssid, ETH_ALEN); | 
|  |  | 
|  | return iwm_send_mlme_profile(iwm); | 
|  | } | 
|  |  | 
|  | static int iwm_cfg80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev) | 
|  | { | 
|  | struct iwm_priv *iwm = wiphy_to_iwm(wiphy); | 
|  |  | 
|  | if (iwm->umac_profile_active) | 
|  | return iwm_invalidate_mlme_profile(iwm); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct cfg80211_ops iwm_cfg80211_ops = { | 
|  | .change_virtual_intf = iwm_cfg80211_change_iface, | 
|  | .scan = iwm_cfg80211_scan, | 
|  | .set_wiphy_params = iwm_cfg80211_set_wiphy_params, | 
|  | .join_ibss = iwm_cfg80211_join_ibss, | 
|  | .leave_ibss = iwm_cfg80211_leave_ibss, | 
|  | }; | 
|  |  | 
|  | struct wireless_dev *iwm_wdev_alloc(int sizeof_bus, struct device *dev) | 
|  | { | 
|  | int ret = 0; | 
|  | struct wireless_dev *wdev; | 
|  |  | 
|  | /* | 
|  | * We're trying to have the following memory | 
|  | * layout: | 
|  | * | 
|  | * +-------------------------+ | 
|  | * | struct wiphy	     | | 
|  | * +-------------------------+ | 
|  | * | struct iwm_priv         | | 
|  | * +-------------------------+ | 
|  | * | bus private data        | | 
|  | * | (e.g. iwm_priv_sdio)    | | 
|  | * +-------------------------+ | 
|  | * | 
|  | */ | 
|  |  | 
|  | wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL); | 
|  | if (!wdev) { | 
|  | dev_err(dev, "Couldn't allocate wireless device\n"); | 
|  | return ERR_PTR(-ENOMEM); | 
|  | } | 
|  |  | 
|  | wdev->wiphy = wiphy_new(&iwm_cfg80211_ops, | 
|  | sizeof(struct iwm_priv) + sizeof_bus); | 
|  | if (!wdev->wiphy) { | 
|  | dev_err(dev, "Couldn't allocate wiphy device\n"); | 
|  | ret = -ENOMEM; | 
|  | goto out_err_new; | 
|  | } | 
|  |  | 
|  | set_wiphy_dev(wdev->wiphy, dev); | 
|  | wdev->wiphy->max_scan_ssids = UMAC_WIFI_IF_PROBE_OPTION_MAX; | 
|  | wdev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | | 
|  | BIT(NL80211_IFTYPE_ADHOC); | 
|  | wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &iwm_band_2ghz; | 
|  | wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = &iwm_band_5ghz; | 
|  | wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; | 
|  |  | 
|  | ret = wiphy_register(wdev->wiphy); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "Couldn't register wiphy device\n"); | 
|  | goto out_err_register; | 
|  | } | 
|  |  | 
|  | return wdev; | 
|  |  | 
|  | out_err_register: | 
|  | wiphy_free(wdev->wiphy); | 
|  |  | 
|  | out_err_new: | 
|  | kfree(wdev); | 
|  |  | 
|  | return ERR_PTR(ret); | 
|  | } | 
|  |  | 
|  | void iwm_wdev_free(struct iwm_priv *iwm) | 
|  | { | 
|  | struct wireless_dev *wdev = iwm_to_wdev(iwm); | 
|  |  | 
|  | if (!wdev) | 
|  | return; | 
|  |  | 
|  | wiphy_unregister(wdev->wiphy); | 
|  | wiphy_free(wdev->wiphy); | 
|  | kfree(wdev); | 
|  | } |