|  | /* | 
|  | * WL3501 Wireless LAN PCMCIA Card Driver for Linux | 
|  | * Written originally for Linux 2.0.30 by Fox Chen, mhchen@golf.ccl.itri.org.tw | 
|  | * Ported to 2.2, 2.4 & 2.5 by Arnaldo Carvalho de Melo <acme@conectiva.com.br> | 
|  | * Wireless extensions in 2.4 by Gustavo Niemeyer <niemeyer@conectiva.com> | 
|  | * | 
|  | * References used by Fox Chen while writing the original driver for 2.0.30: | 
|  | * | 
|  | *   1. WL24xx packet drivers (tooasm.asm) | 
|  | *   2. Access Point Firmware Interface Specification for IEEE 802.11 SUTRO | 
|  | *   3. IEEE 802.11 | 
|  | *   4. Linux network driver (/usr/src/linux/drivers/net) | 
|  | *   5. ISA card driver - wl24.c | 
|  | *   6. Linux PCMCIA skeleton driver - skeleton.c | 
|  | *   7. Linux PCMCIA 3c589 network driver - 3c589_cs.c | 
|  | * | 
|  | * Tested with WL2400 firmware 1.2, Linux 2.0.30, and pcmcia-cs-2.9.12 | 
|  | *   1. Performance: about 165 Kbytes/sec in TCP/IP with Ad-Hoc mode. | 
|  | *      rsh 192.168.1.3 "dd if=/dev/zero bs=1k count=1000" > /dev/null | 
|  | *      (Specification 2M bits/sec. is about 250 Kbytes/sec., but we must deduct | 
|  | *       ETHER/IP/UDP/TCP header, and acknowledgement overhead) | 
|  | * | 
|  | * Tested with Planet AP in 2.4.17, 184 Kbytes/s in UDP in Infrastructure mode, | 
|  | * 173 Kbytes/s in TCP. | 
|  | * | 
|  | * Tested with Planet AP in 2.5.73-bk, 216 Kbytes/s in Infrastructure mode | 
|  | * with a SMP machine (dual pentium 100), using pktgen, 432 pps (pkt_size = 60) | 
|  | */ | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/ethtool.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/in.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/fcntl.h> | 
|  | #include <linux/if_arp.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/skbuff.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/wireless.h> | 
|  | #include <linux/ieee80211.h> | 
|  |  | 
|  | #include <net/iw_handler.h> | 
|  |  | 
|  | #include <pcmcia/cs_types.h> | 
|  | #include <pcmcia/cs.h> | 
|  | #include <pcmcia/cistpl.h> | 
|  | #include <pcmcia/cisreg.h> | 
|  | #include <pcmcia/ds.h> | 
|  |  | 
|  | #include <asm/io.h> | 
|  | #include <asm/uaccess.h> | 
|  | #include <asm/system.h> | 
|  |  | 
|  | #include "wl3501.h" | 
|  |  | 
|  | #ifndef __i386__ | 
|  | #define slow_down_io() | 
|  | #endif | 
|  |  | 
|  | /* For rough constant delay */ | 
|  | #define WL3501_NOPLOOP(n) { int x = 0; while (x++ < n) slow_down_io(); } | 
|  |  | 
|  | /* | 
|  | * All the PCMCIA modules use PCMCIA_DEBUG to control debugging.  If you do not | 
|  | * define PCMCIA_DEBUG at all, all the debug code will be left out.  If you | 
|  | * compile with PCMCIA_DEBUG=0, the debug code will be present but disabled -- | 
|  | * but it can then be enabled for specific modules at load time with a | 
|  | * 'pc_debug=#' option to insmod. | 
|  | */ | 
|  | #define PCMCIA_DEBUG 0 | 
|  | #ifdef PCMCIA_DEBUG | 
|  | static int pc_debug = PCMCIA_DEBUG; | 
|  | module_param(pc_debug, int, 0); | 
|  | #define dprintk(n, format, args...) \ | 
|  | { if (pc_debug > (n)) \ | 
|  | printk(KERN_INFO "%s: " format "\n", __func__ , ##args); } | 
|  | #else | 
|  | #define dprintk(n, format, args...) | 
|  | #endif | 
|  |  | 
|  | #define wl3501_outb(a, b) { outb(a, b); slow_down_io(); } | 
|  | #define wl3501_outb_p(a, b) { outb_p(a, b); slow_down_io(); } | 
|  | #define wl3501_outsb(a, b, c) { outsb(a, b, c); slow_down_io(); } | 
|  |  | 
|  | #define WL3501_RELEASE_TIMEOUT (25 * HZ) | 
|  | #define WL3501_MAX_ADHOC_TRIES 16 | 
|  |  | 
|  | #define WL3501_RESUME	0 | 
|  | #define WL3501_SUSPEND	1 | 
|  |  | 
|  | /* | 
|  | * The event() function is this driver's Card Services event handler.  It will | 
|  | * be called by Card Services when an appropriate card status event is | 
|  | * received. The config() and release() entry points are used to configure or | 
|  | * release a socket, in response to card insertion and ejection events.  They | 
|  | * are invoked from the wl24 event handler. | 
|  | */ | 
|  | static int wl3501_config(struct pcmcia_device *link); | 
|  | static void wl3501_release(struct pcmcia_device *link); | 
|  |  | 
|  | /* | 
|  | * The dev_info variable is the "key" that is used to match up this | 
|  | * device driver with appropriate cards, through the card configuration | 
|  | * database. | 
|  | */ | 
|  | static dev_info_t wl3501_dev_info = "wl3501_cs"; | 
|  |  | 
|  | static const struct { | 
|  | int reg_domain; | 
|  | int min, max, deflt; | 
|  | } iw_channel_table[] = { | 
|  | { | 
|  | .reg_domain = IW_REG_DOMAIN_FCC, | 
|  | .min	    = 1, | 
|  | .max	    = 11, | 
|  | .deflt	    = 1, | 
|  | }, | 
|  | { | 
|  | .reg_domain = IW_REG_DOMAIN_DOC, | 
|  | .min	    = 1, | 
|  | .max	    = 11, | 
|  | .deflt	    = 1, | 
|  | }, | 
|  | { | 
|  | .reg_domain = IW_REG_DOMAIN_ETSI, | 
|  | .min	    = 1, | 
|  | .max	    = 13, | 
|  | .deflt	    = 1, | 
|  | }, | 
|  | { | 
|  | .reg_domain = IW_REG_DOMAIN_SPAIN, | 
|  | .min	    = 10, | 
|  | .max	    = 11, | 
|  | .deflt	    = 10, | 
|  | }, | 
|  | { | 
|  | .reg_domain = IW_REG_DOMAIN_FRANCE, | 
|  | .min	    = 10, | 
|  | .max	    = 13, | 
|  | .deflt	    = 10, | 
|  | }, | 
|  | { | 
|  | .reg_domain = IW_REG_DOMAIN_MKK, | 
|  | .min	    = 14, | 
|  | .max	    = 14, | 
|  | .deflt	    = 14, | 
|  | }, | 
|  | { | 
|  | .reg_domain = IW_REG_DOMAIN_MKK1, | 
|  | .min	    = 1, | 
|  | .max	    = 14, | 
|  | .deflt	    = 1, | 
|  | }, | 
|  | { | 
|  | .reg_domain = IW_REG_DOMAIN_ISRAEL, | 
|  | .min	    = 3, | 
|  | .max	    = 9, | 
|  | .deflt	    = 9, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * iw_valid_channel - validate channel in regulatory domain | 
|  | * @reg_comain - regulatory domain | 
|  | * @channel - channel to validate | 
|  | * | 
|  | * Returns 0 if invalid in the specified regulatory domain, non-zero if valid. | 
|  | */ | 
|  | static int iw_valid_channel(int reg_domain, int channel) | 
|  | { | 
|  | int i, rc = 0; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(iw_channel_table); i++) | 
|  | if (reg_domain == iw_channel_table[i].reg_domain) { | 
|  | rc = channel >= iw_channel_table[i].min && | 
|  | channel <= iw_channel_table[i].max; | 
|  | break; | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iw_default_channel - get default channel for a regulatory domain | 
|  | * @reg_comain - regulatory domain | 
|  | * | 
|  | * Returns the default channel for a regulatory domain | 
|  | */ | 
|  | static int iw_default_channel(int reg_domain) | 
|  | { | 
|  | int i, rc = 1; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(iw_channel_table); i++) | 
|  | if (reg_domain == iw_channel_table[i].reg_domain) { | 
|  | rc = iw_channel_table[i].deflt; | 
|  | break; | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void iw_set_mgmt_info_element(enum iw_mgmt_info_element_ids id, | 
|  | struct iw_mgmt_info_element *el, | 
|  | void *value, int len) | 
|  | { | 
|  | el->id  = id; | 
|  | el->len = len; | 
|  | memcpy(el->data, value, len); | 
|  | } | 
|  |  | 
|  | static void iw_copy_mgmt_info_element(struct iw_mgmt_info_element *to, | 
|  | struct iw_mgmt_info_element *from) | 
|  | { | 
|  | iw_set_mgmt_info_element(from->id, to, from->data, from->len); | 
|  | } | 
|  |  | 
|  | static inline void wl3501_switch_page(struct wl3501_card *this, u8 page) | 
|  | { | 
|  | wl3501_outb(page, this->base_addr + WL3501_NIC_BSS); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Get Ethernet MAC addresss. | 
|  | * | 
|  | * WARNING: We switch to FPAGE0 and switc back again. | 
|  | *          Making sure there is no other WL function beening called by ISR. | 
|  | */ | 
|  | static int wl3501_get_flash_mac_addr(struct wl3501_card *this) | 
|  | { | 
|  | int base_addr = this->base_addr; | 
|  |  | 
|  | /* get MAC addr */ | 
|  | wl3501_outb(WL3501_BSS_FPAGE3, base_addr + WL3501_NIC_BSS); /* BSS */ | 
|  | wl3501_outb(0x00, base_addr + WL3501_NIC_LMAL);	/* LMAL */ | 
|  | wl3501_outb(0x40, base_addr + WL3501_NIC_LMAH);	/* LMAH */ | 
|  |  | 
|  | /* wait for reading EEPROM */ | 
|  | WL3501_NOPLOOP(100); | 
|  | this->mac_addr[0] = inb(base_addr + WL3501_NIC_IODPA); | 
|  | WL3501_NOPLOOP(100); | 
|  | this->mac_addr[1] = inb(base_addr + WL3501_NIC_IODPA); | 
|  | WL3501_NOPLOOP(100); | 
|  | this->mac_addr[2] = inb(base_addr + WL3501_NIC_IODPA); | 
|  | WL3501_NOPLOOP(100); | 
|  | this->mac_addr[3] = inb(base_addr + WL3501_NIC_IODPA); | 
|  | WL3501_NOPLOOP(100); | 
|  | this->mac_addr[4] = inb(base_addr + WL3501_NIC_IODPA); | 
|  | WL3501_NOPLOOP(100); | 
|  | this->mac_addr[5] = inb(base_addr + WL3501_NIC_IODPA); | 
|  | WL3501_NOPLOOP(100); | 
|  | this->reg_domain = inb(base_addr + WL3501_NIC_IODPA); | 
|  | WL3501_NOPLOOP(100); | 
|  | wl3501_outb(WL3501_BSS_FPAGE0, base_addr + WL3501_NIC_BSS); | 
|  | wl3501_outb(0x04, base_addr + WL3501_NIC_LMAL); | 
|  | wl3501_outb(0x40, base_addr + WL3501_NIC_LMAH); | 
|  | WL3501_NOPLOOP(100); | 
|  | this->version[0] = inb(base_addr + WL3501_NIC_IODPA); | 
|  | WL3501_NOPLOOP(100); | 
|  | this->version[1] = inb(base_addr + WL3501_NIC_IODPA); | 
|  | /* switch to SRAM Page 0 (for safety) */ | 
|  | wl3501_switch_page(this, WL3501_BSS_SPAGE0); | 
|  |  | 
|  | /* The MAC addr should be 00:60:... */ | 
|  | return this->mac_addr[0] == 0x00 && this->mac_addr[1] == 0x60; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * wl3501_set_to_wla - Move 'size' bytes from PC to card | 
|  | * @dest: Card addressing space | 
|  | * @src: PC addressing space | 
|  | * @size: Bytes to move | 
|  | * | 
|  | * Move 'size' bytes from PC to card. (Shouldn't be interrupted) | 
|  | */ | 
|  | static void wl3501_set_to_wla(struct wl3501_card *this, u16 dest, void *src, | 
|  | int size) | 
|  | { | 
|  | /* switch to SRAM Page 0 */ | 
|  | wl3501_switch_page(this, (dest & 0x8000) ? WL3501_BSS_SPAGE1 : | 
|  | WL3501_BSS_SPAGE0); | 
|  | /* set LMAL and LMAH */ | 
|  | wl3501_outb(dest & 0xff, this->base_addr + WL3501_NIC_LMAL); | 
|  | wl3501_outb(((dest >> 8) & 0x7f), this->base_addr + WL3501_NIC_LMAH); | 
|  |  | 
|  | /* rep out to Port A */ | 
|  | wl3501_outsb(this->base_addr + WL3501_NIC_IODPA, src, size); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * wl3501_get_from_wla - Move 'size' bytes from card to PC | 
|  | * @src: Card addressing space | 
|  | * @dest: PC addressing space | 
|  | * @size: Bytes to move | 
|  | * | 
|  | * Move 'size' bytes from card to PC. (Shouldn't be interrupted) | 
|  | */ | 
|  | static void wl3501_get_from_wla(struct wl3501_card *this, u16 src, void *dest, | 
|  | int size) | 
|  | { | 
|  | /* switch to SRAM Page 0 */ | 
|  | wl3501_switch_page(this, (src & 0x8000) ? WL3501_BSS_SPAGE1 : | 
|  | WL3501_BSS_SPAGE0); | 
|  | /* set LMAL and LMAH */ | 
|  | wl3501_outb(src & 0xff, this->base_addr + WL3501_NIC_LMAL); | 
|  | wl3501_outb((src >> 8) & 0x7f, this->base_addr + WL3501_NIC_LMAH); | 
|  |  | 
|  | /* rep get from Port A */ | 
|  | insb(this->base_addr + WL3501_NIC_IODPA, dest, size); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Get/Allocate a free Tx Data Buffer | 
|  | * | 
|  | *  *--------------*-----------------*----------------------------------* | 
|  | *  |    PLCP      |    MAC Header   |  DST  SRC         Data ...       | | 
|  | *  |  (24 bytes)  |    (30 bytes)   |  (6)  (6)  (Ethernet Row Data)   | | 
|  | *  *--------------*-----------------*----------------------------------* | 
|  | *  \               \- IEEE 802.11 -/ \-------------- len --------------/ | 
|  | *   \-struct wl3501_80211_tx_hdr--/   \-------- Ethernet Frame -------/ | 
|  | * | 
|  | * Return = Postion in Card | 
|  | */ | 
|  | static u16 wl3501_get_tx_buffer(struct wl3501_card *this, u16 len) | 
|  | { | 
|  | u16 next, blk_cnt = 0, zero = 0; | 
|  | u16 full_len = sizeof(struct wl3501_80211_tx_hdr) + len; | 
|  | u16 ret = 0; | 
|  |  | 
|  | if (full_len > this->tx_buffer_cnt * 254) | 
|  | goto out; | 
|  | ret = this->tx_buffer_head; | 
|  | while (full_len) { | 
|  | if (full_len < 254) | 
|  | full_len = 0; | 
|  | else | 
|  | full_len -= 254; | 
|  | wl3501_get_from_wla(this, this->tx_buffer_head, &next, | 
|  | sizeof(next)); | 
|  | if (!full_len) | 
|  | wl3501_set_to_wla(this, this->tx_buffer_head, &zero, | 
|  | sizeof(zero)); | 
|  | this->tx_buffer_head = next; | 
|  | blk_cnt++; | 
|  | /* if buffer is not enough */ | 
|  | if (!next && full_len) { | 
|  | this->tx_buffer_head = ret; | 
|  | ret = 0; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  | this->tx_buffer_cnt -= blk_cnt; | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Free an allocated Tx Buffer. ptr must be correct position. | 
|  | */ | 
|  | static void wl3501_free_tx_buffer(struct wl3501_card *this, u16 ptr) | 
|  | { | 
|  | /* check if all space is not free */ | 
|  | if (!this->tx_buffer_head) | 
|  | this->tx_buffer_head = ptr; | 
|  | else | 
|  | wl3501_set_to_wla(this, this->tx_buffer_tail, | 
|  | &ptr, sizeof(ptr)); | 
|  | while (ptr) { | 
|  | u16 next; | 
|  |  | 
|  | this->tx_buffer_cnt++; | 
|  | wl3501_get_from_wla(this, ptr, &next, sizeof(next)); | 
|  | this->tx_buffer_tail = ptr; | 
|  | ptr = next; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int wl3501_esbq_req_test(struct wl3501_card *this) | 
|  | { | 
|  | u8 tmp; | 
|  |  | 
|  | wl3501_get_from_wla(this, this->esbq_req_head + 3, &tmp, sizeof(tmp)); | 
|  | return tmp & 0x80; | 
|  | } | 
|  |  | 
|  | static void wl3501_esbq_req(struct wl3501_card *this, u16 *ptr) | 
|  | { | 
|  | u16 tmp = 0; | 
|  |  | 
|  | wl3501_set_to_wla(this, this->esbq_req_head, ptr, 2); | 
|  | wl3501_set_to_wla(this, this->esbq_req_head + 2, &tmp, sizeof(tmp)); | 
|  | this->esbq_req_head += 4; | 
|  | if (this->esbq_req_head >= this->esbq_req_end) | 
|  | this->esbq_req_head = this->esbq_req_start; | 
|  | } | 
|  |  | 
|  | static int wl3501_esbq_exec(struct wl3501_card *this, void *sig, int sig_size) | 
|  | { | 
|  | int rc = -EIO; | 
|  |  | 
|  | if (wl3501_esbq_req_test(this)) { | 
|  | u16 ptr = wl3501_get_tx_buffer(this, sig_size); | 
|  | if (ptr) { | 
|  | wl3501_set_to_wla(this, ptr, sig, sig_size); | 
|  | wl3501_esbq_req(this, &ptr); | 
|  | rc = 0; | 
|  | } | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int wl3501_get_mib_value(struct wl3501_card *this, u8 index, | 
|  | void *bf, int size) | 
|  | { | 
|  | struct wl3501_get_req sig = { | 
|  | .sig_id	    = WL3501_SIG_GET_REQ, | 
|  | .mib_attrib = index, | 
|  | }; | 
|  | unsigned long flags; | 
|  | int rc = -EIO; | 
|  |  | 
|  | spin_lock_irqsave(&this->lock, flags); | 
|  | if (wl3501_esbq_req_test(this)) { | 
|  | u16 ptr = wl3501_get_tx_buffer(this, sizeof(sig)); | 
|  | if (ptr) { | 
|  | wl3501_set_to_wla(this, ptr, &sig, sizeof(sig)); | 
|  | wl3501_esbq_req(this, &ptr); | 
|  | this->sig_get_confirm.mib_status = 255; | 
|  | spin_unlock_irqrestore(&this->lock, flags); | 
|  | rc = wait_event_interruptible(this->wait, | 
|  | this->sig_get_confirm.mib_status != 255); | 
|  | if (!rc) | 
|  | memcpy(bf, this->sig_get_confirm.mib_value, | 
|  | size); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&this->lock, flags); | 
|  | out: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int wl3501_pwr_mgmt(struct wl3501_card *this, int suspend) | 
|  | { | 
|  | struct wl3501_pwr_mgmt_req sig = { | 
|  | .sig_id		= WL3501_SIG_PWR_MGMT_REQ, | 
|  | .pwr_save	= suspend, | 
|  | .wake_up	= !suspend, | 
|  | .receive_dtims	= 10, | 
|  | }; | 
|  | unsigned long flags; | 
|  | int rc = -EIO; | 
|  |  | 
|  | spin_lock_irqsave(&this->lock, flags); | 
|  | if (wl3501_esbq_req_test(this)) { | 
|  | u16 ptr = wl3501_get_tx_buffer(this, sizeof(sig)); | 
|  | if (ptr) { | 
|  | wl3501_set_to_wla(this, ptr, &sig, sizeof(sig)); | 
|  | wl3501_esbq_req(this, &ptr); | 
|  | this->sig_pwr_mgmt_confirm.status = 255; | 
|  | spin_unlock_irqrestore(&this->lock, flags); | 
|  | rc = wait_event_interruptible(this->wait, | 
|  | this->sig_pwr_mgmt_confirm.status != 255); | 
|  | printk(KERN_INFO "%s: %s status=%d\n", __func__, | 
|  | suspend ? "suspend" : "resume", | 
|  | this->sig_pwr_mgmt_confirm.status); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&this->lock, flags); | 
|  | out: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * wl3501_send_pkt - Send a packet. | 
|  | * @this - card | 
|  | * | 
|  | * Send a packet. | 
|  | * | 
|  | * data = Ethernet raw frame.  (e.g. data[0] - data[5] is Dest MAC Addr, | 
|  | *                                   data[6] - data[11] is Src MAC Addr) | 
|  | * Ref: IEEE 802.11 | 
|  | */ | 
|  | static int wl3501_send_pkt(struct wl3501_card *this, u8 *data, u16 len) | 
|  | { | 
|  | u16 bf, sig_bf, next, tmplen, pktlen; | 
|  | struct wl3501_md_req sig = { | 
|  | .sig_id = WL3501_SIG_MD_REQ, | 
|  | }; | 
|  | u8 *pdata = (char *)data; | 
|  | int rc = -EIO; | 
|  |  | 
|  | if (wl3501_esbq_req_test(this)) { | 
|  | sig_bf = wl3501_get_tx_buffer(this, sizeof(sig)); | 
|  | rc = -ENOMEM; | 
|  | if (!sig_bf)	/* No free buffer available */ | 
|  | goto out; | 
|  | bf = wl3501_get_tx_buffer(this, len + 26 + 24); | 
|  | if (!bf) { | 
|  | /* No free buffer available */ | 
|  | wl3501_free_tx_buffer(this, sig_bf); | 
|  | goto out; | 
|  | } | 
|  | rc = 0; | 
|  | memcpy(&sig.daddr[0], pdata, 12); | 
|  | pktlen = len - 12; | 
|  | pdata += 12; | 
|  | sig.data = bf; | 
|  | if (((*pdata) * 256 + (*(pdata + 1))) > 1500) { | 
|  | u8 addr4[ETH_ALEN] = { | 
|  | [0] = 0xAA, [1] = 0xAA, [2] = 0x03, [4] = 0x00, | 
|  | }; | 
|  |  | 
|  | wl3501_set_to_wla(this, bf + 2 + | 
|  | offsetof(struct wl3501_tx_hdr, addr4), | 
|  | addr4, sizeof(addr4)); | 
|  | sig.size = pktlen + 24 + 4 + 6; | 
|  | if (pktlen > (254 - sizeof(struct wl3501_tx_hdr))) { | 
|  | tmplen = 254 - sizeof(struct wl3501_tx_hdr); | 
|  | pktlen -= tmplen; | 
|  | } else { | 
|  | tmplen = pktlen; | 
|  | pktlen = 0; | 
|  | } | 
|  | wl3501_set_to_wla(this, | 
|  | bf + 2 + sizeof(struct wl3501_tx_hdr), | 
|  | pdata, tmplen); | 
|  | pdata += tmplen; | 
|  | wl3501_get_from_wla(this, bf, &next, sizeof(next)); | 
|  | bf = next; | 
|  | } else { | 
|  | sig.size = pktlen + 24 + 4 - 2; | 
|  | pdata += 2; | 
|  | pktlen -= 2; | 
|  | if (pktlen > (254 - sizeof(struct wl3501_tx_hdr) + 6)) { | 
|  | tmplen = 254 - sizeof(struct wl3501_tx_hdr) + 6; | 
|  | pktlen -= tmplen; | 
|  | } else { | 
|  | tmplen = pktlen; | 
|  | pktlen = 0; | 
|  | } | 
|  | wl3501_set_to_wla(this, bf + 2 + | 
|  | offsetof(struct wl3501_tx_hdr, addr4), | 
|  | pdata, tmplen); | 
|  | pdata += tmplen; | 
|  | wl3501_get_from_wla(this, bf, &next, sizeof(next)); | 
|  | bf = next; | 
|  | } | 
|  | while (pktlen > 0) { | 
|  | if (pktlen > 254) { | 
|  | tmplen = 254; | 
|  | pktlen -= 254; | 
|  | } else { | 
|  | tmplen = pktlen; | 
|  | pktlen = 0; | 
|  | } | 
|  | wl3501_set_to_wla(this, bf + 2, pdata, tmplen); | 
|  | pdata += tmplen; | 
|  | wl3501_get_from_wla(this, bf, &next, sizeof(next)); | 
|  | bf = next; | 
|  | } | 
|  | wl3501_set_to_wla(this, sig_bf, &sig, sizeof(sig)); | 
|  | wl3501_esbq_req(this, &sig_bf); | 
|  | } | 
|  | out: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int wl3501_mgmt_resync(struct wl3501_card *this) | 
|  | { | 
|  | struct wl3501_resync_req sig = { | 
|  | .sig_id = WL3501_SIG_RESYNC_REQ, | 
|  | }; | 
|  |  | 
|  | return wl3501_esbq_exec(this, &sig, sizeof(sig)); | 
|  | } | 
|  |  | 
|  | static inline int wl3501_fw_bss_type(struct wl3501_card *this) | 
|  | { | 
|  | return this->net_type == IW_MODE_INFRA ? WL3501_NET_TYPE_INFRA : | 
|  | WL3501_NET_TYPE_ADHOC; | 
|  | } | 
|  |  | 
|  | static inline int wl3501_fw_cap_info(struct wl3501_card *this) | 
|  | { | 
|  | return this->net_type == IW_MODE_INFRA ? WL3501_MGMT_CAPABILITY_ESS : | 
|  | WL3501_MGMT_CAPABILITY_IBSS; | 
|  | } | 
|  |  | 
|  | static int wl3501_mgmt_scan(struct wl3501_card *this, u16 chan_time) | 
|  | { | 
|  | struct wl3501_scan_req sig = { | 
|  | .sig_id		= WL3501_SIG_SCAN_REQ, | 
|  | .scan_type	= WL3501_SCAN_TYPE_ACTIVE, | 
|  | .probe_delay	= 0x10, | 
|  | .min_chan_time	= chan_time, | 
|  | .max_chan_time	= chan_time, | 
|  | .bss_type	= wl3501_fw_bss_type(this), | 
|  | }; | 
|  |  | 
|  | this->bss_cnt = this->join_sta_bss = 0; | 
|  | return wl3501_esbq_exec(this, &sig, sizeof(sig)); | 
|  | } | 
|  |  | 
|  | static int wl3501_mgmt_join(struct wl3501_card *this, u16 stas) | 
|  | { | 
|  | struct wl3501_join_req sig = { | 
|  | .sig_id		  = WL3501_SIG_JOIN_REQ, | 
|  | .timeout	  = 10, | 
|  | .ds_pset = { | 
|  | .el = { | 
|  | .id  = IW_MGMT_INFO_ELEMENT_DS_PARAMETER_SET, | 
|  | .len = 1, | 
|  | }, | 
|  | .chan	= this->chan, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | memcpy(&sig.beacon_period, &this->bss_set[stas].beacon_period, 72); | 
|  | return wl3501_esbq_exec(this, &sig, sizeof(sig)); | 
|  | } | 
|  |  | 
|  | static int wl3501_mgmt_start(struct wl3501_card *this) | 
|  | { | 
|  | struct wl3501_start_req sig = { | 
|  | .sig_id			= WL3501_SIG_START_REQ, | 
|  | .beacon_period		= 400, | 
|  | .dtim_period		= 1, | 
|  | .ds_pset = { | 
|  | .el = { | 
|  | .id  = IW_MGMT_INFO_ELEMENT_DS_PARAMETER_SET, | 
|  | .len = 1, | 
|  | }, | 
|  | .chan	= this->chan, | 
|  | }, | 
|  | .bss_basic_rset	= { | 
|  | .el = { | 
|  | .id	= IW_MGMT_INFO_ELEMENT_SUPPORTED_RATES, | 
|  | .len = 2, | 
|  | }, | 
|  | .data_rate_labels = { | 
|  | [0] = IW_MGMT_RATE_LABEL_MANDATORY | | 
|  | IW_MGMT_RATE_LABEL_1MBIT, | 
|  | [1] = IW_MGMT_RATE_LABEL_MANDATORY | | 
|  | IW_MGMT_RATE_LABEL_2MBIT, | 
|  | }, | 
|  | }, | 
|  | .operational_rset	= { | 
|  | .el = { | 
|  | .id	= IW_MGMT_INFO_ELEMENT_SUPPORTED_RATES, | 
|  | .len = 2, | 
|  | }, | 
|  | .data_rate_labels = { | 
|  | [0] = IW_MGMT_RATE_LABEL_MANDATORY | | 
|  | IW_MGMT_RATE_LABEL_1MBIT, | 
|  | [1] = IW_MGMT_RATE_LABEL_MANDATORY | | 
|  | IW_MGMT_RATE_LABEL_2MBIT, | 
|  | }, | 
|  | }, | 
|  | .ibss_pset		= { | 
|  | .el = { | 
|  | .id	 = IW_MGMT_INFO_ELEMENT_IBSS_PARAMETER_SET, | 
|  | .len     = 2, | 
|  | }, | 
|  | .atim_window = 10, | 
|  | }, | 
|  | .bss_type		= wl3501_fw_bss_type(this), | 
|  | .cap_info		= wl3501_fw_cap_info(this), | 
|  | }; | 
|  |  | 
|  | iw_copy_mgmt_info_element(&sig.ssid.el, &this->essid.el); | 
|  | iw_copy_mgmt_info_element(&this->keep_essid.el, &this->essid.el); | 
|  | return wl3501_esbq_exec(this, &sig, sizeof(sig)); | 
|  | } | 
|  |  | 
|  | static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr) | 
|  | { | 
|  | u16 i = 0; | 
|  | int matchflag = 0; | 
|  | struct wl3501_scan_confirm sig; | 
|  |  | 
|  | dprintk(3, "entry"); | 
|  | wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); | 
|  | if (sig.status == WL3501_STATUS_SUCCESS) { | 
|  | dprintk(3, "success"); | 
|  | if ((this->net_type == IW_MODE_INFRA && | 
|  | (sig.cap_info & WL3501_MGMT_CAPABILITY_ESS)) || | 
|  | (this->net_type == IW_MODE_ADHOC && | 
|  | (sig.cap_info & WL3501_MGMT_CAPABILITY_IBSS)) || | 
|  | this->net_type == IW_MODE_AUTO) { | 
|  | if (!this->essid.el.len) | 
|  | matchflag = 1; | 
|  | else if (this->essid.el.len == 3 && | 
|  | !memcmp(this->essid.essid, "ANY", 3)) | 
|  | matchflag = 1; | 
|  | else if (this->essid.el.len != sig.ssid.el.len) | 
|  | matchflag = 0; | 
|  | else if (memcmp(this->essid.essid, sig.ssid.essid, | 
|  | this->essid.el.len)) | 
|  | matchflag = 0; | 
|  | else | 
|  | matchflag = 1; | 
|  | if (matchflag) { | 
|  | for (i = 0; i < this->bss_cnt; i++) { | 
|  | if (!memcmp(this->bss_set[i].bssid, | 
|  | sig.bssid, ETH_ALEN)) { | 
|  | matchflag = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | if (matchflag && (i < 20)) { | 
|  | memcpy(&this->bss_set[i].beacon_period, | 
|  | &sig.beacon_period, 73); | 
|  | this->bss_cnt++; | 
|  | this->rssi = sig.rssi; | 
|  | } | 
|  | } | 
|  | } else if (sig.status == WL3501_STATUS_TIMEOUT) { | 
|  | dprintk(3, "timeout"); | 
|  | this->join_sta_bss = 0; | 
|  | for (i = this->join_sta_bss; i < this->bss_cnt; i++) | 
|  | if (!wl3501_mgmt_join(this, i)) | 
|  | break; | 
|  | this->join_sta_bss = i; | 
|  | if (this->join_sta_bss == this->bss_cnt) { | 
|  | if (this->net_type == IW_MODE_INFRA) | 
|  | wl3501_mgmt_scan(this, 100); | 
|  | else { | 
|  | this->adhoc_times++; | 
|  | if (this->adhoc_times > WL3501_MAX_ADHOC_TRIES) | 
|  | wl3501_mgmt_start(this); | 
|  | else | 
|  | wl3501_mgmt_scan(this, 100); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * wl3501_block_interrupt - Mask interrupt from SUTRO | 
|  | * @this - card | 
|  | * | 
|  | * Mask interrupt from SUTRO. (i.e. SUTRO cannot interrupt the HOST) | 
|  | * Return: 1 if interrupt is originally enabled | 
|  | */ | 
|  | static int wl3501_block_interrupt(struct wl3501_card *this) | 
|  | { | 
|  | u8 old = inb(this->base_addr + WL3501_NIC_GCR); | 
|  | u8 new = old & (~(WL3501_GCR_ECINT | WL3501_GCR_INT2EC | | 
|  | WL3501_GCR_ENECINT)); | 
|  |  | 
|  | wl3501_outb(new, this->base_addr + WL3501_NIC_GCR); | 
|  | return old & WL3501_GCR_ENECINT; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * wl3501_unblock_interrupt - Enable interrupt from SUTRO | 
|  | * @this - card | 
|  | * | 
|  | * Enable interrupt from SUTRO. (i.e. SUTRO can interrupt the HOST) | 
|  | * Return: 1 if interrupt is originally enabled | 
|  | */ | 
|  | static int wl3501_unblock_interrupt(struct wl3501_card *this) | 
|  | { | 
|  | u8 old = inb(this->base_addr + WL3501_NIC_GCR); | 
|  | u8 new = (old & ~(WL3501_GCR_ECINT | WL3501_GCR_INT2EC)) | | 
|  | WL3501_GCR_ENECINT; | 
|  |  | 
|  | wl3501_outb(new, this->base_addr + WL3501_NIC_GCR); | 
|  | return old & WL3501_GCR_ENECINT; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * wl3501_receive - Receive data from Receive Queue. | 
|  | * | 
|  | * Receive data from Receive Queue. | 
|  | * | 
|  | * @this: card | 
|  | * @bf: address of host | 
|  | * @size: size of buffer. | 
|  | */ | 
|  | static u16 wl3501_receive(struct wl3501_card *this, u8 *bf, u16 size) | 
|  | { | 
|  | u16 next_addr, next_addr1; | 
|  | u8 *data = bf + 12; | 
|  |  | 
|  | size -= 12; | 
|  | wl3501_get_from_wla(this, this->start_seg + 2, | 
|  | &next_addr, sizeof(next_addr)); | 
|  | if (size > WL3501_BLKSZ - sizeof(struct wl3501_rx_hdr)) { | 
|  | wl3501_get_from_wla(this, | 
|  | this->start_seg + | 
|  | sizeof(struct wl3501_rx_hdr), data, | 
|  | WL3501_BLKSZ - | 
|  | sizeof(struct wl3501_rx_hdr)); | 
|  | size -= WL3501_BLKSZ - sizeof(struct wl3501_rx_hdr); | 
|  | data += WL3501_BLKSZ - sizeof(struct wl3501_rx_hdr); | 
|  | } else { | 
|  | wl3501_get_from_wla(this, | 
|  | this->start_seg + | 
|  | sizeof(struct wl3501_rx_hdr), | 
|  | data, size); | 
|  | size = 0; | 
|  | } | 
|  | while (size > 0) { | 
|  | if (size > WL3501_BLKSZ - 5) { | 
|  | wl3501_get_from_wla(this, next_addr + 5, data, | 
|  | WL3501_BLKSZ - 5); | 
|  | size -= WL3501_BLKSZ - 5; | 
|  | data += WL3501_BLKSZ - 5; | 
|  | wl3501_get_from_wla(this, next_addr + 2, &next_addr1, | 
|  | sizeof(next_addr1)); | 
|  | next_addr = next_addr1; | 
|  | } else { | 
|  | wl3501_get_from_wla(this, next_addr + 5, data, size); | 
|  | size = 0; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void wl3501_esbq_req_free(struct wl3501_card *this) | 
|  | { | 
|  | u8 tmp; | 
|  | u16 addr; | 
|  |  | 
|  | if (this->esbq_req_head == this->esbq_req_tail) | 
|  | goto out; | 
|  | wl3501_get_from_wla(this, this->esbq_req_tail + 3, &tmp, sizeof(tmp)); | 
|  | if (!(tmp & 0x80)) | 
|  | goto out; | 
|  | wl3501_get_from_wla(this, this->esbq_req_tail, &addr, sizeof(addr)); | 
|  | wl3501_free_tx_buffer(this, addr); | 
|  | this->esbq_req_tail += 4; | 
|  | if (this->esbq_req_tail >= this->esbq_req_end) | 
|  | this->esbq_req_tail = this->esbq_req_start; | 
|  | out: | 
|  | return; | 
|  | } | 
|  |  | 
|  | static int wl3501_esbq_confirm(struct wl3501_card *this) | 
|  | { | 
|  | u8 tmp; | 
|  |  | 
|  | wl3501_get_from_wla(this, this->esbq_confirm + 3, &tmp, sizeof(tmp)); | 
|  | return tmp & 0x80; | 
|  | } | 
|  |  | 
|  | static void wl3501_online(struct net_device *dev) | 
|  | { | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  |  | 
|  | printk(KERN_INFO "%s: Wireless LAN online. BSSID: %pM\n", | 
|  | dev->name, this->bssid); | 
|  | netif_wake_queue(dev); | 
|  | } | 
|  |  | 
|  | static void wl3501_esbq_confirm_done(struct wl3501_card *this) | 
|  | { | 
|  | u8 tmp = 0; | 
|  |  | 
|  | wl3501_set_to_wla(this, this->esbq_confirm + 3, &tmp, sizeof(tmp)); | 
|  | this->esbq_confirm += 4; | 
|  | if (this->esbq_confirm >= this->esbq_confirm_end) | 
|  | this->esbq_confirm = this->esbq_confirm_start; | 
|  | } | 
|  |  | 
|  | static int wl3501_mgmt_auth(struct wl3501_card *this) | 
|  | { | 
|  | struct wl3501_auth_req sig = { | 
|  | .sig_id	 = WL3501_SIG_AUTH_REQ, | 
|  | .type	 = WL3501_SYS_TYPE_OPEN, | 
|  | .timeout = 1000, | 
|  | }; | 
|  |  | 
|  | dprintk(3, "entry"); | 
|  | memcpy(sig.mac_addr, this->bssid, ETH_ALEN); | 
|  | return wl3501_esbq_exec(this, &sig, sizeof(sig)); | 
|  | } | 
|  |  | 
|  | static int wl3501_mgmt_association(struct wl3501_card *this) | 
|  | { | 
|  | struct wl3501_assoc_req sig = { | 
|  | .sig_id		 = WL3501_SIG_ASSOC_REQ, | 
|  | .timeout	 = 1000, | 
|  | .listen_interval = 5, | 
|  | .cap_info	 = this->cap_info, | 
|  | }; | 
|  |  | 
|  | dprintk(3, "entry"); | 
|  | memcpy(sig.mac_addr, this->bssid, ETH_ALEN); | 
|  | return wl3501_esbq_exec(this, &sig, sizeof(sig)); | 
|  | } | 
|  |  | 
|  | static void wl3501_mgmt_join_confirm(struct net_device *dev, u16 addr) | 
|  | { | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  | struct wl3501_join_confirm sig; | 
|  |  | 
|  | dprintk(3, "entry"); | 
|  | wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); | 
|  | if (sig.status == WL3501_STATUS_SUCCESS) { | 
|  | if (this->net_type == IW_MODE_INFRA) { | 
|  | if (this->join_sta_bss < this->bss_cnt) { | 
|  | const int i = this->join_sta_bss; | 
|  | memcpy(this->bssid, | 
|  | this->bss_set[i].bssid, ETH_ALEN); | 
|  | this->chan = this->bss_set[i].ds_pset.chan; | 
|  | iw_copy_mgmt_info_element(&this->keep_essid.el, | 
|  | &this->bss_set[i].ssid.el); | 
|  | wl3501_mgmt_auth(this); | 
|  | } | 
|  | } else { | 
|  | const int i = this->join_sta_bss; | 
|  |  | 
|  | memcpy(&this->bssid, &this->bss_set[i].bssid, ETH_ALEN); | 
|  | this->chan = this->bss_set[i].ds_pset.chan; | 
|  | iw_copy_mgmt_info_element(&this->keep_essid.el, | 
|  | &this->bss_set[i].ssid.el); | 
|  | wl3501_online(dev); | 
|  | } | 
|  | } else { | 
|  | int i; | 
|  | this->join_sta_bss++; | 
|  | for (i = this->join_sta_bss; i < this->bss_cnt; i++) | 
|  | if (!wl3501_mgmt_join(this, i)) | 
|  | break; | 
|  | this->join_sta_bss = i; | 
|  | if (this->join_sta_bss == this->bss_cnt) { | 
|  | if (this->net_type == IW_MODE_INFRA) | 
|  | wl3501_mgmt_scan(this, 100); | 
|  | else { | 
|  | this->adhoc_times++; | 
|  | if (this->adhoc_times > WL3501_MAX_ADHOC_TRIES) | 
|  | wl3501_mgmt_start(this); | 
|  | else | 
|  | wl3501_mgmt_scan(this, 100); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline void wl3501_alarm_interrupt(struct net_device *dev, | 
|  | struct wl3501_card *this) | 
|  | { | 
|  | if (this->net_type == IW_MODE_INFRA) { | 
|  | printk(KERN_INFO "Wireless LAN offline\n"); | 
|  | netif_stop_queue(dev); | 
|  | wl3501_mgmt_resync(this); | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline void wl3501_md_confirm_interrupt(struct net_device *dev, | 
|  | struct wl3501_card *this, | 
|  | u16 addr) | 
|  | { | 
|  | struct wl3501_md_confirm sig; | 
|  |  | 
|  | dprintk(3, "entry"); | 
|  | wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); | 
|  | wl3501_free_tx_buffer(this, sig.data); | 
|  | if (netif_queue_stopped(dev)) | 
|  | netif_wake_queue(dev); | 
|  | } | 
|  |  | 
|  | static inline void wl3501_md_ind_interrupt(struct net_device *dev, | 
|  | struct wl3501_card *this, u16 addr) | 
|  | { | 
|  | struct wl3501_md_ind sig; | 
|  | struct sk_buff *skb; | 
|  | u8 rssi, addr4[ETH_ALEN]; | 
|  | u16 pkt_len; | 
|  |  | 
|  | wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); | 
|  | this->start_seg = sig.data; | 
|  | wl3501_get_from_wla(this, | 
|  | sig.data + offsetof(struct wl3501_rx_hdr, rssi), | 
|  | &rssi, sizeof(rssi)); | 
|  | this->rssi = rssi <= 63 ? (rssi * 100) / 64 : 255; | 
|  |  | 
|  | wl3501_get_from_wla(this, | 
|  | sig.data + | 
|  | offsetof(struct wl3501_rx_hdr, addr4), | 
|  | &addr4, sizeof(addr4)); | 
|  | if (!(addr4[0] == 0xAA && addr4[1] == 0xAA && | 
|  | addr4[2] == 0x03 && addr4[4] == 0x00)) { | 
|  | printk(KERN_INFO "Insupported packet type!\n"); | 
|  | return; | 
|  | } | 
|  | pkt_len = sig.size + 12 - 24 - 4 - 6; | 
|  |  | 
|  | skb = dev_alloc_skb(pkt_len + 5); | 
|  |  | 
|  | if (!skb) { | 
|  | printk(KERN_WARNING "%s: Can't alloc a sk_buff of size %d.\n", | 
|  | dev->name, pkt_len); | 
|  | dev->stats.rx_dropped++; | 
|  | } else { | 
|  | skb->dev = dev; | 
|  | skb_reserve(skb, 2); /* IP headers on 16 bytes boundaries */ | 
|  | skb_copy_to_linear_data(skb, (unsigned char *)&sig.daddr, 12); | 
|  | wl3501_receive(this, skb->data, pkt_len); | 
|  | skb_put(skb, pkt_len); | 
|  | skb->protocol	= eth_type_trans(skb, dev); | 
|  | dev->stats.rx_packets++; | 
|  | dev->stats.rx_bytes += skb->len; | 
|  | netif_rx(skb); | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline void wl3501_get_confirm_interrupt(struct wl3501_card *this, | 
|  | u16 addr, void *sig, int size) | 
|  | { | 
|  | dprintk(3, "entry"); | 
|  | wl3501_get_from_wla(this, addr, &this->sig_get_confirm, | 
|  | sizeof(this->sig_get_confirm)); | 
|  | wake_up(&this->wait); | 
|  | } | 
|  |  | 
|  | static inline void wl3501_start_confirm_interrupt(struct net_device *dev, | 
|  | struct wl3501_card *this, | 
|  | u16 addr) | 
|  | { | 
|  | struct wl3501_start_confirm sig; | 
|  |  | 
|  | dprintk(3, "entry"); | 
|  | wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); | 
|  | if (sig.status == WL3501_STATUS_SUCCESS) | 
|  | netif_wake_queue(dev); | 
|  | } | 
|  |  | 
|  | static inline void wl3501_assoc_confirm_interrupt(struct net_device *dev, | 
|  | u16 addr) | 
|  | { | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  | struct wl3501_assoc_confirm sig; | 
|  |  | 
|  | dprintk(3, "entry"); | 
|  | wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); | 
|  |  | 
|  | if (sig.status == WL3501_STATUS_SUCCESS) | 
|  | wl3501_online(dev); | 
|  | } | 
|  |  | 
|  | static inline void wl3501_auth_confirm_interrupt(struct wl3501_card *this, | 
|  | u16 addr) | 
|  | { | 
|  | struct wl3501_auth_confirm sig; | 
|  |  | 
|  | dprintk(3, "entry"); | 
|  | wl3501_get_from_wla(this, addr, &sig, sizeof(sig)); | 
|  |  | 
|  | if (sig.status == WL3501_STATUS_SUCCESS) | 
|  | wl3501_mgmt_association(this); | 
|  | else | 
|  | wl3501_mgmt_resync(this); | 
|  | } | 
|  |  | 
|  | static inline void wl3501_rx_interrupt(struct net_device *dev) | 
|  | { | 
|  | int morepkts; | 
|  | u16 addr; | 
|  | u8 sig_id; | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  |  | 
|  | dprintk(3, "entry"); | 
|  | loop: | 
|  | morepkts = 0; | 
|  | if (!wl3501_esbq_confirm(this)) | 
|  | goto free; | 
|  | wl3501_get_from_wla(this, this->esbq_confirm, &addr, sizeof(addr)); | 
|  | wl3501_get_from_wla(this, addr + 2, &sig_id, sizeof(sig_id)); | 
|  |  | 
|  | switch (sig_id) { | 
|  | case WL3501_SIG_DEAUTH_IND: | 
|  | case WL3501_SIG_DISASSOC_IND: | 
|  | case WL3501_SIG_ALARM: | 
|  | wl3501_alarm_interrupt(dev, this); | 
|  | break; | 
|  | case WL3501_SIG_MD_CONFIRM: | 
|  | wl3501_md_confirm_interrupt(dev, this, addr); | 
|  | break; | 
|  | case WL3501_SIG_MD_IND: | 
|  | wl3501_md_ind_interrupt(dev, this, addr); | 
|  | break; | 
|  | case WL3501_SIG_GET_CONFIRM: | 
|  | wl3501_get_confirm_interrupt(this, addr, | 
|  | &this->sig_get_confirm, | 
|  | sizeof(this->sig_get_confirm)); | 
|  | break; | 
|  | case WL3501_SIG_PWR_MGMT_CONFIRM: | 
|  | wl3501_get_confirm_interrupt(this, addr, | 
|  | &this->sig_pwr_mgmt_confirm, | 
|  | sizeof(this->sig_pwr_mgmt_confirm)); | 
|  | break; | 
|  | case WL3501_SIG_START_CONFIRM: | 
|  | wl3501_start_confirm_interrupt(dev, this, addr); | 
|  | break; | 
|  | case WL3501_SIG_SCAN_CONFIRM: | 
|  | wl3501_mgmt_scan_confirm(this, addr); | 
|  | break; | 
|  | case WL3501_SIG_JOIN_CONFIRM: | 
|  | wl3501_mgmt_join_confirm(dev, addr); | 
|  | break; | 
|  | case WL3501_SIG_ASSOC_CONFIRM: | 
|  | wl3501_assoc_confirm_interrupt(dev, addr); | 
|  | break; | 
|  | case WL3501_SIG_AUTH_CONFIRM: | 
|  | wl3501_auth_confirm_interrupt(this, addr); | 
|  | break; | 
|  | case WL3501_SIG_RESYNC_CONFIRM: | 
|  | wl3501_mgmt_resync(this); /* FIXME: should be resync_confirm */ | 
|  | break; | 
|  | } | 
|  | wl3501_esbq_confirm_done(this); | 
|  | morepkts = 1; | 
|  | /* free request if necessary */ | 
|  | free: | 
|  | wl3501_esbq_req_free(this); | 
|  | if (morepkts) | 
|  | goto loop; | 
|  | } | 
|  |  | 
|  | static inline void wl3501_ack_interrupt(struct wl3501_card *this) | 
|  | { | 
|  | wl3501_outb(WL3501_GCR_ECINT, this->base_addr + WL3501_NIC_GCR); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * wl3501_interrupt - Hardware interrupt from card. | 
|  | * @irq - Interrupt number | 
|  | * @dev_id - net_device | 
|  | * | 
|  | * We must acknowledge the interrupt as soon as possible, and block the | 
|  | * interrupt from the same card immediately to prevent re-entry. | 
|  | * | 
|  | * Before accessing the Control_Status_Block, we must lock SUTRO first. | 
|  | * On the other hand, to prevent SUTRO from malfunctioning, we must | 
|  | * unlock the SUTRO as soon as possible. | 
|  | */ | 
|  | static irqreturn_t wl3501_interrupt(int irq, void *dev_id) | 
|  | { | 
|  | struct net_device *dev = dev_id; | 
|  | struct wl3501_card *this; | 
|  |  | 
|  | this = netdev_priv(dev); | 
|  | spin_lock(&this->lock); | 
|  | wl3501_ack_interrupt(this); | 
|  | wl3501_block_interrupt(this); | 
|  | wl3501_rx_interrupt(dev); | 
|  | wl3501_unblock_interrupt(this); | 
|  | spin_unlock(&this->lock); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int wl3501_reset_board(struct wl3501_card *this) | 
|  | { | 
|  | u8 tmp = 0; | 
|  | int i, rc = 0; | 
|  |  | 
|  | /* Coreset */ | 
|  | wl3501_outb_p(WL3501_GCR_CORESET, this->base_addr + WL3501_NIC_GCR); | 
|  | wl3501_outb_p(0, this->base_addr + WL3501_NIC_GCR); | 
|  | wl3501_outb_p(WL3501_GCR_CORESET, this->base_addr + WL3501_NIC_GCR); | 
|  |  | 
|  | /* Reset SRAM 0x480 to zero */ | 
|  | wl3501_set_to_wla(this, 0x480, &tmp, sizeof(tmp)); | 
|  |  | 
|  | /* Start up */ | 
|  | wl3501_outb_p(0, this->base_addr + WL3501_NIC_GCR); | 
|  |  | 
|  | WL3501_NOPLOOP(1024 * 50); | 
|  |  | 
|  | wl3501_unblock_interrupt(this);	/* acme: was commented */ | 
|  |  | 
|  | /* Polling Self_Test_Status */ | 
|  | for (i = 0; i < 10000; i++) { | 
|  | wl3501_get_from_wla(this, 0x480, &tmp, sizeof(tmp)); | 
|  |  | 
|  | if (tmp == 'W') { | 
|  | /* firmware complete all test successfully */ | 
|  | tmp = 'A'; | 
|  | wl3501_set_to_wla(this, 0x480, &tmp, sizeof(tmp)); | 
|  | goto out; | 
|  | } | 
|  | WL3501_NOPLOOP(10); | 
|  | } | 
|  | printk(KERN_WARNING "%s: failed to reset the board!\n", __func__); | 
|  | rc = -ENODEV; | 
|  | out: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int wl3501_init_firmware(struct wl3501_card *this) | 
|  | { | 
|  | u16 ptr, next; | 
|  | int rc = wl3501_reset_board(this); | 
|  |  | 
|  | if (rc) | 
|  | goto fail; | 
|  | this->card_name[0] = '\0'; | 
|  | wl3501_get_from_wla(this, 0x1a00, | 
|  | this->card_name, sizeof(this->card_name)); | 
|  | this->card_name[sizeof(this->card_name) - 1] = '\0'; | 
|  | this->firmware_date[0] = '\0'; | 
|  | wl3501_get_from_wla(this, 0x1a40, | 
|  | this->firmware_date, sizeof(this->firmware_date)); | 
|  | this->firmware_date[sizeof(this->firmware_date) - 1] = '\0'; | 
|  | /* Switch to SRAM Page 0 */ | 
|  | wl3501_switch_page(this, WL3501_BSS_SPAGE0); | 
|  | /* Read parameter from card */ | 
|  | wl3501_get_from_wla(this, 0x482, &this->esbq_req_start, 2); | 
|  | wl3501_get_from_wla(this, 0x486, &this->esbq_req_end, 2); | 
|  | wl3501_get_from_wla(this, 0x488, &this->esbq_confirm_start, 2); | 
|  | wl3501_get_from_wla(this, 0x48c, &this->esbq_confirm_end, 2); | 
|  | wl3501_get_from_wla(this, 0x48e, &this->tx_buffer_head, 2); | 
|  | wl3501_get_from_wla(this, 0x492, &this->tx_buffer_size, 2); | 
|  | this->esbq_req_tail	= this->esbq_req_head = this->esbq_req_start; | 
|  | this->esbq_req_end     += this->esbq_req_start; | 
|  | this->esbq_confirm	= this->esbq_confirm_start; | 
|  | this->esbq_confirm_end += this->esbq_confirm_start; | 
|  | /* Initial Tx Buffer */ | 
|  | this->tx_buffer_cnt = 1; | 
|  | ptr = this->tx_buffer_head; | 
|  | next = ptr + WL3501_BLKSZ; | 
|  | while ((next - this->tx_buffer_head) < this->tx_buffer_size) { | 
|  | this->tx_buffer_cnt++; | 
|  | wl3501_set_to_wla(this, ptr, &next, sizeof(next)); | 
|  | ptr = next; | 
|  | next = ptr + WL3501_BLKSZ; | 
|  | } | 
|  | rc = 0; | 
|  | next = 0; | 
|  | wl3501_set_to_wla(this, ptr, &next, sizeof(next)); | 
|  | this->tx_buffer_tail = ptr; | 
|  | out: | 
|  | return rc; | 
|  | fail: | 
|  | printk(KERN_WARNING "%s: failed!\n", __func__); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | static int wl3501_close(struct net_device *dev) | 
|  | { | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  | int rc = -ENODEV; | 
|  | unsigned long flags; | 
|  | struct pcmcia_device *link; | 
|  | link = this->p_dev; | 
|  |  | 
|  | spin_lock_irqsave(&this->lock, flags); | 
|  | link->open--; | 
|  |  | 
|  | /* Stop wl3501_hard_start_xmit() from now on */ | 
|  | netif_stop_queue(dev); | 
|  | wl3501_ack_interrupt(this); | 
|  |  | 
|  | /* Mask interrupts from the SUTRO */ | 
|  | wl3501_block_interrupt(this); | 
|  |  | 
|  | rc = 0; | 
|  | printk(KERN_INFO "%s: WL3501 closed\n", dev->name); | 
|  | spin_unlock_irqrestore(&this->lock, flags); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * wl3501_reset - Reset the SUTRO. | 
|  | * @dev - network device | 
|  | * | 
|  | * It is almost the same as wl3501_open(). In fact, we may just wl3501_close() | 
|  | * and wl3501_open() again, but I wouldn't like to free_irq() when the driver | 
|  | * is running. It seems to be dangerous. | 
|  | */ | 
|  | static int wl3501_reset(struct net_device *dev) | 
|  | { | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  | int rc = -ENODEV; | 
|  |  | 
|  | wl3501_block_interrupt(this); | 
|  |  | 
|  | if (wl3501_init_firmware(this)) { | 
|  | printk(KERN_WARNING "%s: Can't initialize Firmware!\n", | 
|  | dev->name); | 
|  | /* Free IRQ, and mark IRQ as unused */ | 
|  | free_irq(dev->irq, dev); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Queue has to be started only when the Card is Started | 
|  | */ | 
|  | netif_stop_queue(dev); | 
|  | this->adhoc_times = 0; | 
|  | wl3501_ack_interrupt(this); | 
|  | wl3501_unblock_interrupt(this); | 
|  | wl3501_mgmt_scan(this, 100); | 
|  | dprintk(1, "%s: device reset", dev->name); | 
|  | rc = 0; | 
|  | out: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void wl3501_tx_timeout(struct net_device *dev) | 
|  | { | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  | struct net_device_stats *stats = &dev->stats; | 
|  | unsigned long flags; | 
|  | int rc; | 
|  |  | 
|  | stats->tx_errors++; | 
|  | spin_lock_irqsave(&this->lock, flags); | 
|  | rc = wl3501_reset(dev); | 
|  | spin_unlock_irqrestore(&this->lock, flags); | 
|  | if (rc) | 
|  | printk(KERN_ERR "%s: Error %d resetting card on Tx timeout!\n", | 
|  | dev->name, rc); | 
|  | else { | 
|  | dev->trans_start = jiffies; | 
|  | netif_wake_queue(dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Return : 0 - OK | 
|  | *	    1 - Could not transmit (dev_queue_xmit will queue it) | 
|  | *		and try to sent it later | 
|  | */ | 
|  | static int wl3501_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) | 
|  | { | 
|  | int enabled, rc; | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&this->lock, flags); | 
|  | enabled = wl3501_block_interrupt(this); | 
|  | dev->trans_start = jiffies; | 
|  | rc = wl3501_send_pkt(this, skb->data, skb->len); | 
|  | if (enabled) | 
|  | wl3501_unblock_interrupt(this); | 
|  | if (rc) { | 
|  | ++dev->stats.tx_dropped; | 
|  | netif_stop_queue(dev); | 
|  | rc = NETDEV_TX_OK; | 
|  | } else { | 
|  | ++dev->stats.tx_packets; | 
|  | dev->stats.tx_bytes += skb->len; | 
|  | kfree_skb(skb); | 
|  |  | 
|  | if (this->tx_buffer_cnt < 2) | 
|  | netif_stop_queue(dev); | 
|  | } | 
|  | spin_unlock_irqrestore(&this->lock, flags); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int wl3501_open(struct net_device *dev) | 
|  | { | 
|  | int rc = -ENODEV; | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  | unsigned long flags; | 
|  | struct pcmcia_device *link; | 
|  | link = this->p_dev; | 
|  |  | 
|  | spin_lock_irqsave(&this->lock, flags); | 
|  | if (!pcmcia_dev_present(link)) | 
|  | goto out; | 
|  | netif_device_attach(dev); | 
|  | link->open++; | 
|  |  | 
|  | /* Initial WL3501 firmware */ | 
|  | dprintk(1, "%s: Initialize WL3501 firmware...", dev->name); | 
|  | if (wl3501_init_firmware(this)) | 
|  | goto fail; | 
|  | /* Initial device variables */ | 
|  | this->adhoc_times = 0; | 
|  | /* Acknowledge Interrupt, for cleaning last state */ | 
|  | wl3501_ack_interrupt(this); | 
|  |  | 
|  | /* Enable interrupt from card after all */ | 
|  | wl3501_unblock_interrupt(this); | 
|  | wl3501_mgmt_scan(this, 100); | 
|  | rc = 0; | 
|  | dprintk(1, "%s: WL3501 opened", dev->name); | 
|  | printk(KERN_INFO "%s: Card Name: %s\n" | 
|  | "%s: Firmware Date: %s\n", | 
|  | dev->name, this->card_name, | 
|  | dev->name, this->firmware_date); | 
|  | out: | 
|  | spin_unlock_irqrestore(&this->lock, flags); | 
|  | return rc; | 
|  | fail: | 
|  | printk(KERN_WARNING "%s: Can't initialize firmware!\n", dev->name); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | static struct iw_statistics *wl3501_get_wireless_stats(struct net_device *dev) | 
|  | { | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  | struct iw_statistics *wstats = &this->wstats; | 
|  | u32 value; /* size checked: it is u32 */ | 
|  |  | 
|  | memset(wstats, 0, sizeof(*wstats)); | 
|  | wstats->status = netif_running(dev); | 
|  | if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_WEP_ICV_ERROR_COUNT, | 
|  | &value, sizeof(value))) | 
|  | wstats->discard.code += value; | 
|  | if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_WEP_UNDECRYPTABLE_COUNT, | 
|  | &value, sizeof(value))) | 
|  | wstats->discard.code += value; | 
|  | if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_WEP_EXCLUDED_COUNT, | 
|  | &value, sizeof(value))) | 
|  | wstats->discard.code += value; | 
|  | if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_RETRY_COUNT, | 
|  | &value, sizeof(value))) | 
|  | wstats->discard.retries	= value; | 
|  | if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_FAILED_COUNT, | 
|  | &value, sizeof(value))) | 
|  | wstats->discard.misc += value; | 
|  | if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_RTS_FAILURE_COUNT, | 
|  | &value, sizeof(value))) | 
|  | wstats->discard.misc += value; | 
|  | if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_ACK_FAILURE_COUNT, | 
|  | &value, sizeof(value))) | 
|  | wstats->discard.misc += value; | 
|  | if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_FRAME_DUPLICATE_COUNT, | 
|  | &value, sizeof(value))) | 
|  | wstats->discard.misc += value; | 
|  | return wstats; | 
|  | } | 
|  |  | 
|  | static void wl3501_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) | 
|  | { | 
|  | strlcpy(info->driver, wl3501_dev_info, sizeof(info->driver)); | 
|  | } | 
|  |  | 
|  | static const struct ethtool_ops ops = { | 
|  | .get_drvinfo = wl3501_get_drvinfo | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * wl3501_detach - deletes a driver "instance" | 
|  | * @link - FILL_IN | 
|  | * | 
|  | * This deletes a driver "instance". The device is de-registered with Card | 
|  | * Services. If it has been released, all local data structures are freed. | 
|  | * Otherwise, the structures will be freed when the device is released. | 
|  | */ | 
|  | static void wl3501_detach(struct pcmcia_device *link) | 
|  | { | 
|  | struct net_device *dev = link->priv; | 
|  |  | 
|  | /* If the device is currently configured and active, we won't actually | 
|  | * delete it yet.  Instead, it is marked so that when the release() | 
|  | * function is called, that will trigger a proper detach(). */ | 
|  |  | 
|  | while (link->open > 0) | 
|  | wl3501_close(dev); | 
|  |  | 
|  | netif_device_detach(dev); | 
|  | wl3501_release(link); | 
|  |  | 
|  | if (link->priv) | 
|  | free_netdev(link->priv); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | static int wl3501_get_name(struct net_device *dev, struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | strlcpy(wrqu->name, "IEEE 802.11-DS", sizeof(wrqu->name)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wl3501_set_freq(struct net_device *dev, struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  | int channel = wrqu->freq.m; | 
|  | int rc = -EINVAL; | 
|  |  | 
|  | if (iw_valid_channel(this->reg_domain, channel)) { | 
|  | this->chan = channel; | 
|  | rc = wl3501_reset(dev); | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int wl3501_get_freq(struct net_device *dev, struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  |  | 
|  | wrqu->freq.m = ieee80211_dsss_chan_to_freq(this->chan) * 100000; | 
|  | wrqu->freq.e = 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wl3501_set_mode(struct net_device *dev, struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | int rc = -EINVAL; | 
|  |  | 
|  | if (wrqu->mode == IW_MODE_INFRA || | 
|  | wrqu->mode == IW_MODE_ADHOC || | 
|  | wrqu->mode == IW_MODE_AUTO) { | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  |  | 
|  | this->net_type = wrqu->mode; | 
|  | rc = wl3501_reset(dev); | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int wl3501_get_mode(struct net_device *dev, struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  |  | 
|  | wrqu->mode = this->net_type; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wl3501_get_sens(struct net_device *dev, struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  |  | 
|  | wrqu->sens.value = this->rssi; | 
|  | wrqu->sens.disabled = !wrqu->sens.value; | 
|  | wrqu->sens.fixed = 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wl3501_get_range(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct iw_range *range = (struct iw_range *)extra; | 
|  |  | 
|  | /* Set the length (very important for backward compatibility) */ | 
|  | wrqu->data.length = sizeof(*range); | 
|  |  | 
|  | /* Set all the info we don't care or don't know about to zero */ | 
|  | memset(range, 0, sizeof(*range)); | 
|  |  | 
|  | /* Set the Wireless Extension versions */ | 
|  | range->we_version_compiled	= WIRELESS_EXT; | 
|  | range->we_version_source	= 1; | 
|  | range->throughput		= 2 * 1000 * 1000;     /* ~2 Mb/s */ | 
|  | /* FIXME: study the code to fill in more fields... */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wl3501_set_wap(struct net_device *dev, struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  | static const u8 bcast[ETH_ALEN] = { 255, 255, 255, 255, 255, 255 }; | 
|  | int rc = -EINVAL; | 
|  |  | 
|  | /* FIXME: we support other ARPHRDs...*/ | 
|  | if (wrqu->ap_addr.sa_family != ARPHRD_ETHER) | 
|  | goto out; | 
|  | if (!memcmp(bcast, wrqu->ap_addr.sa_data, ETH_ALEN)) { | 
|  | /* FIXME: rescan? */ | 
|  | } else | 
|  | memcpy(this->bssid, wrqu->ap_addr.sa_data, ETH_ALEN); | 
|  | /* FIXME: rescan? deassoc & scan? */ | 
|  | rc = 0; | 
|  | out: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int wl3501_get_wap(struct net_device *dev, struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  |  | 
|  | wrqu->ap_addr.sa_family = ARPHRD_ETHER; | 
|  | memcpy(wrqu->ap_addr.sa_data, this->bssid, ETH_ALEN); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wl3501_set_scan(struct net_device *dev, struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | /* | 
|  | * FIXME: trigger scanning with a reset, yes, I'm lazy | 
|  | */ | 
|  | return wl3501_reset(dev); | 
|  | } | 
|  |  | 
|  | static int wl3501_get_scan(struct net_device *dev, struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  | int i; | 
|  | char *current_ev = extra; | 
|  | struct iw_event iwe; | 
|  |  | 
|  | for (i = 0; i < this->bss_cnt; ++i) { | 
|  | iwe.cmd			= SIOCGIWAP; | 
|  | iwe.u.ap_addr.sa_family = ARPHRD_ETHER; | 
|  | memcpy(iwe.u.ap_addr.sa_data, this->bss_set[i].bssid, ETH_ALEN); | 
|  | current_ev = iwe_stream_add_event(info, current_ev, | 
|  | extra + IW_SCAN_MAX_DATA, | 
|  | &iwe, IW_EV_ADDR_LEN); | 
|  | iwe.cmd		  = SIOCGIWESSID; | 
|  | iwe.u.data.flags  = 1; | 
|  | iwe.u.data.length = this->bss_set[i].ssid.el.len; | 
|  | current_ev = iwe_stream_add_point(info, current_ev, | 
|  | extra + IW_SCAN_MAX_DATA, | 
|  | &iwe, | 
|  | this->bss_set[i].ssid.essid); | 
|  | iwe.cmd	   = SIOCGIWMODE; | 
|  | iwe.u.mode = this->bss_set[i].bss_type; | 
|  | current_ev = iwe_stream_add_event(info, current_ev, | 
|  | extra + IW_SCAN_MAX_DATA, | 
|  | &iwe, IW_EV_UINT_LEN); | 
|  | iwe.cmd = SIOCGIWFREQ; | 
|  | iwe.u.freq.m = this->bss_set[i].ds_pset.chan; | 
|  | iwe.u.freq.e = 0; | 
|  | current_ev = iwe_stream_add_event(info, current_ev, | 
|  | extra + IW_SCAN_MAX_DATA, | 
|  | &iwe, IW_EV_FREQ_LEN); | 
|  | iwe.cmd = SIOCGIWENCODE; | 
|  | if (this->bss_set[i].cap_info & WL3501_MGMT_CAPABILITY_PRIVACY) | 
|  | iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY; | 
|  | else | 
|  | iwe.u.data.flags = IW_ENCODE_DISABLED; | 
|  | iwe.u.data.length = 0; | 
|  | current_ev = iwe_stream_add_point(info, current_ev, | 
|  | extra + IW_SCAN_MAX_DATA, | 
|  | &iwe, NULL); | 
|  | } | 
|  | /* Length of data */ | 
|  | wrqu->data.length = (current_ev - extra); | 
|  | wrqu->data.flags = 0; /* FIXME: set properly these flags */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wl3501_set_essid(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  |  | 
|  | if (wrqu->data.flags) { | 
|  | iw_set_mgmt_info_element(IW_MGMT_INFO_ELEMENT_SSID, | 
|  | &this->essid.el, | 
|  | extra, wrqu->data.length); | 
|  | } else { /* We accept any ESSID */ | 
|  | iw_set_mgmt_info_element(IW_MGMT_INFO_ELEMENT_SSID, | 
|  | &this->essid.el, "ANY", 3); | 
|  | } | 
|  | return wl3501_reset(dev); | 
|  | } | 
|  |  | 
|  | static int wl3501_get_essid(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&this->lock, flags); | 
|  | wrqu->essid.flags  = 1; | 
|  | wrqu->essid.length = this->essid.el.len; | 
|  | memcpy(extra, this->essid.essid, this->essid.el.len); | 
|  | spin_unlock_irqrestore(&this->lock, flags); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wl3501_set_nick(struct net_device *dev, struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  |  | 
|  | if (wrqu->data.length > sizeof(this->nick)) | 
|  | return -E2BIG; | 
|  | strlcpy(this->nick, extra, wrqu->data.length); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wl3501_get_nick(struct net_device *dev, struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  |  | 
|  | strlcpy(extra, this->nick, 32); | 
|  | wrqu->data.length = strlen(extra); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wl3501_get_rate(struct net_device *dev, struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | /* | 
|  | * FIXME: have to see from where to get this info, perhaps this card | 
|  | * works at 1 Mbit/s too... for now leave at 2 Mbit/s that is the most | 
|  | * common with the Planet Access Points. -acme | 
|  | */ | 
|  | wrqu->bitrate.value = 2000000; | 
|  | wrqu->bitrate.fixed = 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wl3501_get_rts_threshold(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | u16 threshold; /* size checked: it is u16 */ | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  | int rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_RTS_THRESHOLD, | 
|  | &threshold, sizeof(threshold)); | 
|  | if (!rc) { | 
|  | wrqu->rts.value = threshold; | 
|  | wrqu->rts.disabled = threshold >= 2347; | 
|  | wrqu->rts.fixed = 1; | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int wl3501_get_frag_threshold(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | u16 threshold; /* size checked: it is u16 */ | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  | int rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_FRAG_THRESHOLD, | 
|  | &threshold, sizeof(threshold)); | 
|  | if (!rc) { | 
|  | wrqu->frag.value = threshold; | 
|  | wrqu->frag.disabled = threshold >= 2346; | 
|  | wrqu->frag.fixed = 1; | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int wl3501_get_txpow(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | u16 txpow; | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  | int rc = wl3501_get_mib_value(this, | 
|  | WL3501_MIB_ATTR_CURRENT_TX_PWR_LEVEL, | 
|  | &txpow, sizeof(txpow)); | 
|  | if (!rc) { | 
|  | wrqu->txpower.value = txpow; | 
|  | wrqu->txpower.disabled = 0; | 
|  | /* | 
|  | * From the MIB values I think this can be configurable, | 
|  | * as it lists several tx power levels -acme | 
|  | */ | 
|  | wrqu->txpower.fixed = 0; | 
|  | wrqu->txpower.flags = IW_TXPOW_MWATT; | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int wl3501_get_retry(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | u8 retry; /* size checked: it is u8 */ | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  | int rc = wl3501_get_mib_value(this, | 
|  | WL3501_MIB_ATTR_LONG_RETRY_LIMIT, | 
|  | &retry, sizeof(retry)); | 
|  | if (rc) | 
|  | goto out; | 
|  | if (wrqu->retry.flags & IW_RETRY_LONG) { | 
|  | wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_LONG; | 
|  | goto set_value; | 
|  | } | 
|  | rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_SHORT_RETRY_LIMIT, | 
|  | &retry, sizeof(retry)); | 
|  | if (rc) | 
|  | goto out; | 
|  | wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_SHORT; | 
|  | set_value: | 
|  | wrqu->retry.value = retry; | 
|  | wrqu->retry.disabled = 0; | 
|  | out: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int wl3501_get_encode(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | u8 implemented, restricted, keys[100], len_keys, tocopy; | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  | int rc = wl3501_get_mib_value(this, | 
|  | WL3501_MIB_ATTR_PRIV_OPT_IMPLEMENTED, | 
|  | &implemented, sizeof(implemented)); | 
|  | if (rc) | 
|  | goto out; | 
|  | if (!implemented) { | 
|  | wrqu->encoding.flags = IW_ENCODE_DISABLED; | 
|  | goto out; | 
|  | } | 
|  | rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_EXCLUDE_UNENCRYPTED, | 
|  | &restricted, sizeof(restricted)); | 
|  | if (rc) | 
|  | goto out; | 
|  | wrqu->encoding.flags = restricted ? IW_ENCODE_RESTRICTED : | 
|  | IW_ENCODE_OPEN; | 
|  | rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_WEP_KEY_MAPPINGS_LEN, | 
|  | &len_keys, sizeof(len_keys)); | 
|  | if (rc) | 
|  | goto out; | 
|  | rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_WEP_KEY_MAPPINGS, | 
|  | keys, len_keys); | 
|  | if (rc) | 
|  | goto out; | 
|  | tocopy = min_t(u8, len_keys, wrqu->encoding.length); | 
|  | tocopy = min_t(u8, tocopy, 100); | 
|  | wrqu->encoding.length = tocopy; | 
|  | memcpy(extra, keys, tocopy); | 
|  | out: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int wl3501_get_power(struct net_device *dev, | 
|  | struct iw_request_info *info, | 
|  | union iwreq_data *wrqu, char *extra) | 
|  | { | 
|  | u8 pwr_state; | 
|  | struct wl3501_card *this = netdev_priv(dev); | 
|  | int rc = wl3501_get_mib_value(this, | 
|  | WL3501_MIB_ATTR_CURRENT_PWR_STATE, | 
|  | &pwr_state, sizeof(pwr_state)); | 
|  | if (rc) | 
|  | goto out; | 
|  | wrqu->power.disabled = !pwr_state; | 
|  | wrqu->power.flags = IW_POWER_ON; | 
|  | out: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static const iw_handler	wl3501_handler[] = { | 
|  | [SIOCGIWNAME	- SIOCIWFIRST] = wl3501_get_name, | 
|  | [SIOCSIWFREQ	- SIOCIWFIRST] = wl3501_set_freq, | 
|  | [SIOCGIWFREQ	- SIOCIWFIRST] = wl3501_get_freq, | 
|  | [SIOCSIWMODE	- SIOCIWFIRST] = wl3501_set_mode, | 
|  | [SIOCGIWMODE	- SIOCIWFIRST] = wl3501_get_mode, | 
|  | [SIOCGIWSENS	- SIOCIWFIRST] = wl3501_get_sens, | 
|  | [SIOCGIWRANGE	- SIOCIWFIRST] = wl3501_get_range, | 
|  | [SIOCSIWSPY	- SIOCIWFIRST] = iw_handler_set_spy, | 
|  | [SIOCGIWSPY	- SIOCIWFIRST] = iw_handler_get_spy, | 
|  | [SIOCSIWTHRSPY	- SIOCIWFIRST] = iw_handler_set_thrspy, | 
|  | [SIOCGIWTHRSPY	- SIOCIWFIRST] = iw_handler_get_thrspy, | 
|  | [SIOCSIWAP	- SIOCIWFIRST] = wl3501_set_wap, | 
|  | [SIOCGIWAP	- SIOCIWFIRST] = wl3501_get_wap, | 
|  | [SIOCSIWSCAN	- SIOCIWFIRST] = wl3501_set_scan, | 
|  | [SIOCGIWSCAN	- SIOCIWFIRST] = wl3501_get_scan, | 
|  | [SIOCSIWESSID	- SIOCIWFIRST] = wl3501_set_essid, | 
|  | [SIOCGIWESSID	- SIOCIWFIRST] = wl3501_get_essid, | 
|  | [SIOCSIWNICKN	- SIOCIWFIRST] = wl3501_set_nick, | 
|  | [SIOCGIWNICKN	- SIOCIWFIRST] = wl3501_get_nick, | 
|  | [SIOCGIWRATE	- SIOCIWFIRST] = wl3501_get_rate, | 
|  | [SIOCGIWRTS	- SIOCIWFIRST] = wl3501_get_rts_threshold, | 
|  | [SIOCGIWFRAG	- SIOCIWFIRST] = wl3501_get_frag_threshold, | 
|  | [SIOCGIWTXPOW	- SIOCIWFIRST] = wl3501_get_txpow, | 
|  | [SIOCGIWRETRY	- SIOCIWFIRST] = wl3501_get_retry, | 
|  | [SIOCGIWENCODE	- SIOCIWFIRST] = wl3501_get_encode, | 
|  | [SIOCGIWPOWER	- SIOCIWFIRST] = wl3501_get_power, | 
|  | }; | 
|  |  | 
|  | static const struct iw_handler_def wl3501_handler_def = { | 
|  | .num_standard	= ARRAY_SIZE(wl3501_handler), | 
|  | .standard	= (iw_handler *)wl3501_handler, | 
|  | .get_wireless_stats = wl3501_get_wireless_stats, | 
|  | }; | 
|  |  | 
|  | static const struct net_device_ops wl3501_netdev_ops = { | 
|  | .ndo_open		= wl3501_open, | 
|  | .ndo_stop		= wl3501_close, | 
|  | .ndo_start_xmit		= wl3501_hard_start_xmit, | 
|  | .ndo_tx_timeout		= wl3501_tx_timeout, | 
|  | .ndo_change_mtu		= eth_change_mtu, | 
|  | .ndo_set_mac_address 	= eth_mac_addr, | 
|  | .ndo_validate_addr	= eth_validate_addr, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * wl3501_attach - creates an "instance" of the driver | 
|  | * | 
|  | * Creates an "instance" of the driver, allocating local data structures for | 
|  | * one device.  The device is registered with Card Services. | 
|  | * | 
|  | * The dev_link structure is initialized, but we don't actually configure the | 
|  | * card at this point -- we wait until we receive a card insertion event. | 
|  | */ | 
|  | static int wl3501_probe(struct pcmcia_device *p_dev) | 
|  | { | 
|  | struct net_device *dev; | 
|  | struct wl3501_card *this; | 
|  |  | 
|  | /* The io structure describes IO port mapping */ | 
|  | p_dev->io.NumPorts1	= 16; | 
|  | p_dev->io.Attributes1	= IO_DATA_PATH_WIDTH_8; | 
|  | p_dev->io.IOAddrLines	= 5; | 
|  |  | 
|  | /* Interrupt setup */ | 
|  | p_dev->irq.Attributes	= IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; | 
|  | p_dev->irq.IRQInfo1	= IRQ_LEVEL_ID; | 
|  | p_dev->irq.Handler = wl3501_interrupt; | 
|  |  | 
|  | /* General socket configuration */ | 
|  | p_dev->conf.Attributes	= CONF_ENABLE_IRQ; | 
|  | p_dev->conf.IntType	= INT_MEMORY_AND_IO; | 
|  | p_dev->conf.ConfigIndex	= 1; | 
|  |  | 
|  | dev = alloc_etherdev(sizeof(struct wl3501_card)); | 
|  | if (!dev) | 
|  | goto out_link; | 
|  |  | 
|  |  | 
|  | dev->netdev_ops		= &wl3501_netdev_ops; | 
|  | dev->watchdog_timeo	= 5 * HZ; | 
|  |  | 
|  | this = netdev_priv(dev); | 
|  | this->wireless_data.spy_data = &this->spy_data; | 
|  | this->p_dev = p_dev; | 
|  | dev->wireless_data	= &this->wireless_data; | 
|  | dev->wireless_handlers	= &wl3501_handler_def; | 
|  | SET_ETHTOOL_OPS(dev, &ops); | 
|  | netif_stop_queue(dev); | 
|  | p_dev->priv = p_dev->irq.Instance = dev; | 
|  |  | 
|  | return wl3501_config(p_dev); | 
|  | out_link: | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | #define CS_CHECK(fn, ret) \ | 
|  | do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) | 
|  |  | 
|  | /** | 
|  | * wl3501_config - configure the PCMCIA socket and make eth device available | 
|  | * @link - FILL_IN | 
|  | * | 
|  | * wl3501_config() is scheduled to run after a CARD_INSERTION event is | 
|  | * received, to configure the PCMCIA socket, and to make the ethernet device | 
|  | * available to the system. | 
|  | */ | 
|  | static int wl3501_config(struct pcmcia_device *link) | 
|  | { | 
|  | struct net_device *dev = link->priv; | 
|  | int i = 0, j, last_fn, last_ret; | 
|  | struct wl3501_card *this; | 
|  |  | 
|  | /* Try allocating IO ports.  This tries a few fixed addresses.  If you | 
|  | * want, you can also read the card's config table to pick addresses -- | 
|  | * see the serial driver for an example. */ | 
|  |  | 
|  | for (j = 0x280; j < 0x400; j += 0x20) { | 
|  | /* The '^0x300' is so that we probe 0x300-0x3ff first, then | 
|  | * 0x200-0x2ff, and so on, because this seems safer */ | 
|  | link->io.BasePort1 = j; | 
|  | link->io.BasePort2 = link->io.BasePort1 + 0x10; | 
|  | i = pcmcia_request_io(link, &link->io); | 
|  | if (i == 0) | 
|  | break; | 
|  | } | 
|  | if (i != 0) { | 
|  | cs_error(link, RequestIO, i); | 
|  | goto failed; | 
|  | } | 
|  |  | 
|  | /* Now allocate an interrupt line. Note that this does not actually | 
|  | * assign a handler to the interrupt. */ | 
|  |  | 
|  | CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); | 
|  |  | 
|  | /* This actually configures the PCMCIA socket -- setting up the I/O | 
|  | * windows and the interrupt mapping.  */ | 
|  |  | 
|  | CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); | 
|  |  | 
|  | dev->irq = link->irq.AssignedIRQ; | 
|  | dev->base_addr = link->io.BasePort1; | 
|  | SET_NETDEV_DEV(dev, &handle_to_dev(link)); | 
|  | if (register_netdev(dev)) { | 
|  | printk(KERN_NOTICE "wl3501_cs: register_netdev() failed\n"); | 
|  | goto failed; | 
|  | } | 
|  |  | 
|  | this = netdev_priv(dev); | 
|  | /* | 
|  | * At this point, the dev_node_t structure(s) should be initialized and | 
|  | * arranged in a linked list at link->dev_node. | 
|  | */ | 
|  | link->dev_node = &this->node; | 
|  |  | 
|  | this->base_addr = dev->base_addr; | 
|  |  | 
|  | if (!wl3501_get_flash_mac_addr(this)) { | 
|  | printk(KERN_WARNING "%s: Cant read MAC addr in flash ROM?\n", | 
|  | dev->name); | 
|  | goto failed; | 
|  | } | 
|  | strcpy(this->node.dev_name, dev->name); | 
|  |  | 
|  | for (i = 0; i < 6; i++) | 
|  | dev->dev_addr[i] = ((char *)&this->mac_addr)[i]; | 
|  |  | 
|  | /* print probe information */ | 
|  | printk(KERN_INFO "%s: wl3501 @ 0x%3.3x, IRQ %d, " | 
|  | "MAC addr in flash ROM:%pM\n", | 
|  | dev->name, this->base_addr, (int)dev->irq, | 
|  | dev->dev_addr); | 
|  | /* | 
|  | * Initialize card parameters - added by jss | 
|  | */ | 
|  | this->net_type		= IW_MODE_INFRA; | 
|  | this->bss_cnt		= 0; | 
|  | this->join_sta_bss	= 0; | 
|  | this->adhoc_times	= 0; | 
|  | iw_set_mgmt_info_element(IW_MGMT_INFO_ELEMENT_SSID, &this->essid.el, | 
|  | "ANY", 3); | 
|  | this->card_name[0]	= '\0'; | 
|  | this->firmware_date[0]	= '\0'; | 
|  | this->rssi		= 255; | 
|  | this->chan		= iw_default_channel(this->reg_domain); | 
|  | strlcpy(this->nick, "Planet WL3501", sizeof(this->nick)); | 
|  | spin_lock_init(&this->lock); | 
|  | init_waitqueue_head(&this->wait); | 
|  | netif_start_queue(dev); | 
|  | return 0; | 
|  |  | 
|  | cs_failed: | 
|  | cs_error(link, last_fn, last_ret); | 
|  | failed: | 
|  | wl3501_release(link); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * wl3501_release - unregister the net, release PCMCIA configuration | 
|  | * @arg - link | 
|  | * | 
|  | * After a card is removed, wl3501_release() will unregister the net device, | 
|  | * and release the PCMCIA configuration.  If the device is still open, this | 
|  | * will be postponed until it is closed. | 
|  | */ | 
|  | static void wl3501_release(struct pcmcia_device *link) | 
|  | { | 
|  | struct net_device *dev = link->priv; | 
|  |  | 
|  | /* Unlink the device chain */ | 
|  | if (link->dev_node) | 
|  | unregister_netdev(dev); | 
|  |  | 
|  | pcmcia_disable_device(link); | 
|  | } | 
|  |  | 
|  | static int wl3501_suspend(struct pcmcia_device *link) | 
|  | { | 
|  | struct net_device *dev = link->priv; | 
|  |  | 
|  | wl3501_pwr_mgmt(netdev_priv(dev), WL3501_SUSPEND); | 
|  | if (link->open) | 
|  | netif_device_detach(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wl3501_resume(struct pcmcia_device *link) | 
|  | { | 
|  | struct net_device *dev = link->priv; | 
|  |  | 
|  | wl3501_pwr_mgmt(netdev_priv(dev), WL3501_RESUME); | 
|  | if (link->open) { | 
|  | wl3501_reset(dev); | 
|  | netif_device_attach(dev); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static struct pcmcia_device_id wl3501_ids[] = { | 
|  | PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0001), | 
|  | PCMCIA_DEVICE_NULL | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(pcmcia, wl3501_ids); | 
|  |  | 
|  | static struct pcmcia_driver wl3501_driver = { | 
|  | .owner		= THIS_MODULE, | 
|  | .drv		= { | 
|  | .name	= "wl3501_cs", | 
|  | }, | 
|  | .probe		= wl3501_probe, | 
|  | .remove		= wl3501_detach, | 
|  | .id_table	= wl3501_ids, | 
|  | .suspend	= wl3501_suspend, | 
|  | .resume		= wl3501_resume, | 
|  | }; | 
|  |  | 
|  | static int __init wl3501_init_module(void) | 
|  | { | 
|  | return pcmcia_register_driver(&wl3501_driver); | 
|  | } | 
|  |  | 
|  | static void __exit wl3501_exit_module(void) | 
|  | { | 
|  | pcmcia_unregister_driver(&wl3501_driver); | 
|  | } | 
|  |  | 
|  | module_init(wl3501_init_module); | 
|  | module_exit(wl3501_exit_module); | 
|  |  | 
|  | MODULE_AUTHOR("Fox Chen <mhchen@golf.ccl.itri.org.tw>, " | 
|  | "Arnaldo Carvalho de Melo <acme@conectiva.com.br>," | 
|  | "Gustavo Niemeyer <niemeyer@conectiva.com>"); | 
|  | MODULE_DESCRIPTION("Planet wl3501 wireless driver"); | 
|  | MODULE_LICENSE("GPL"); |