| /* | 
 |  *  linux/drivers/mmc/pxa.c - PXA MMCI driver | 
 |  * | 
 |  *  Copyright (C) 2003 Russell King, All Rights Reserved. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  *  This hardware is really sick: | 
 |  *   - No way to clear interrupts. | 
 |  *   - Have to turn off the clock whenever we touch the device. | 
 |  *   - Doesn't tell you how many data blocks were transferred. | 
 |  *  Yuck! | 
 |  * | 
 |  *	1 and 3 byte data transfers not supported | 
 |  *	max block length up to 1023 | 
 |  */ | 
 | #include <linux/config.h> | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/dma-mapping.h> | 
 | #include <linux/mmc/host.h> | 
 | #include <linux/mmc/protocol.h> | 
 |  | 
 | #include <asm/dma.h> | 
 | #include <asm/io.h> | 
 | #include <asm/scatterlist.h> | 
 | #include <asm/sizes.h> | 
 |  | 
 | #include <asm/arch/pxa-regs.h> | 
 | #include <asm/arch/mmc.h> | 
 |  | 
 | #include "pxamci.h" | 
 |  | 
 | #ifdef CONFIG_MMC_DEBUG | 
 | #define DBG(x...)	printk(KERN_DEBUG x) | 
 | #else | 
 | #define DBG(x...)	do { } while (0) | 
 | #endif | 
 |  | 
 | #define DRIVER_NAME	"pxa2xx-mci" | 
 |  | 
 | #define NR_SG	1 | 
 |  | 
 | struct pxamci_host { | 
 | 	struct mmc_host		*mmc; | 
 | 	spinlock_t		lock; | 
 | 	struct resource		*res; | 
 | 	void __iomem		*base; | 
 | 	int			irq; | 
 | 	int			dma; | 
 | 	unsigned int		clkrt; | 
 | 	unsigned int		cmdat; | 
 | 	unsigned int		imask; | 
 | 	unsigned int		power_mode; | 
 | 	struct pxamci_platform_data *pdata; | 
 |  | 
 | 	struct mmc_request	*mrq; | 
 | 	struct mmc_command	*cmd; | 
 | 	struct mmc_data		*data; | 
 |  | 
 | 	dma_addr_t		sg_dma; | 
 | 	struct pxa_dma_desc	*sg_cpu; | 
 | 	unsigned int		dma_len; | 
 |  | 
 | 	unsigned int		dma_dir; | 
 | }; | 
 |  | 
 | static inline unsigned int ns_to_clocks(unsigned int ns) | 
 | { | 
 | 	return (ns * (CLOCKRATE / 1000000) + 999) / 1000; | 
 | } | 
 |  | 
 | static void pxamci_stop_clock(struct pxamci_host *host) | 
 | { | 
 | 	if (readl(host->base + MMC_STAT) & STAT_CLK_EN) { | 
 | 		unsigned long timeout = 10000; | 
 | 		unsigned int v; | 
 |  | 
 | 		writel(STOP_CLOCK, host->base + MMC_STRPCL); | 
 |  | 
 | 		do { | 
 | 			v = readl(host->base + MMC_STAT); | 
 | 			if (!(v & STAT_CLK_EN)) | 
 | 				break; | 
 | 			udelay(1); | 
 | 		} while (timeout--); | 
 |  | 
 | 		if (v & STAT_CLK_EN) | 
 | 			dev_err(mmc_dev(host->mmc), "unable to stop clock\n"); | 
 | 	} | 
 | } | 
 |  | 
 | static void pxamci_enable_irq(struct pxamci_host *host, unsigned int mask) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&host->lock, flags); | 
 | 	host->imask &= ~mask; | 
 | 	writel(host->imask, host->base + MMC_I_MASK); | 
 | 	spin_unlock_irqrestore(&host->lock, flags); | 
 | } | 
 |  | 
 | static void pxamci_disable_irq(struct pxamci_host *host, unsigned int mask) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&host->lock, flags); | 
 | 	host->imask |= mask; | 
 | 	writel(host->imask, host->base + MMC_I_MASK); | 
 | 	spin_unlock_irqrestore(&host->lock, flags); | 
 | } | 
 |  | 
 | static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) | 
 | { | 
 | 	unsigned int nob = data->blocks; | 
 | 	unsigned int timeout; | 
 | 	u32 dcmd; | 
 | 	int i; | 
 |  | 
 | 	host->data = data; | 
 |  | 
 | 	if (data->flags & MMC_DATA_STREAM) | 
 | 		nob = 0xffff; | 
 |  | 
 | 	writel(nob, host->base + MMC_NOB); | 
 | 	writel(1 << data->blksz_bits, host->base + MMC_BLKLEN); | 
 |  | 
 | 	timeout = ns_to_clocks(data->timeout_ns) + data->timeout_clks; | 
 | 	writel((timeout + 255) / 256, host->base + MMC_RDTO); | 
 |  | 
 | 	if (data->flags & MMC_DATA_READ) { | 
 | 		host->dma_dir = DMA_FROM_DEVICE; | 
 | 		dcmd = DCMD_INCTRGADDR | DCMD_FLOWTRG; | 
 | 		DRCMRTXMMC = 0; | 
 | 		DRCMRRXMMC = host->dma | DRCMR_MAPVLD; | 
 | 	} else { | 
 | 		host->dma_dir = DMA_TO_DEVICE; | 
 | 		dcmd = DCMD_INCSRCADDR | DCMD_FLOWSRC; | 
 | 		DRCMRRXMMC = 0; | 
 | 		DRCMRTXMMC = host->dma | DRCMR_MAPVLD; | 
 | 	} | 
 |  | 
 | 	dcmd |= DCMD_BURST32 | DCMD_WIDTH1; | 
 |  | 
 | 	host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, | 
 | 				   host->dma_dir); | 
 |  | 
 | 	for (i = 0; i < host->dma_len; i++) { | 
 | 		if (data->flags & MMC_DATA_READ) { | 
 | 			host->sg_cpu[i].dsadr = host->res->start + MMC_RXFIFO; | 
 | 			host->sg_cpu[i].dtadr = sg_dma_address(&data->sg[i]); | 
 | 		} else { | 
 | 			host->sg_cpu[i].dsadr = sg_dma_address(&data->sg[i]); | 
 | 			host->sg_cpu[i].dtadr = host->res->start + MMC_TXFIFO; | 
 | 		} | 
 | 		host->sg_cpu[i].dcmd = dcmd | sg_dma_len(&data->sg[i]); | 
 | 		host->sg_cpu[i].ddadr = host->sg_dma + (i + 1) * | 
 | 					sizeof(struct pxa_dma_desc); | 
 | 	} | 
 | 	host->sg_cpu[host->dma_len - 1].ddadr = DDADR_STOP; | 
 | 	wmb(); | 
 |  | 
 | 	DDADR(host->dma) = host->sg_dma; | 
 | 	DCSR(host->dma) = DCSR_RUN; | 
 | } | 
 |  | 
 | static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat) | 
 | { | 
 | 	WARN_ON(host->cmd != NULL); | 
 | 	host->cmd = cmd; | 
 |  | 
 | 	if (cmd->flags & MMC_RSP_BUSY) | 
 | 		cmdat |= CMDAT_BUSY; | 
 |  | 
 | 	switch (cmd->flags & (MMC_RSP_MASK | MMC_RSP_CRC)) { | 
 | 	case MMC_RSP_SHORT | MMC_RSP_CRC: | 
 | 		cmdat |= CMDAT_RESP_SHORT; | 
 | 		break; | 
 | 	case MMC_RSP_SHORT: | 
 | 		cmdat |= CMDAT_RESP_R3; | 
 | 		break; | 
 | 	case MMC_RSP_LONG | MMC_RSP_CRC: | 
 | 		cmdat |= CMDAT_RESP_R2; | 
 | 		break; | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	writel(cmd->opcode, host->base + MMC_CMD); | 
 | 	writel(cmd->arg >> 16, host->base + MMC_ARGH); | 
 | 	writel(cmd->arg & 0xffff, host->base + MMC_ARGL); | 
 | 	writel(cmdat, host->base + MMC_CMDAT); | 
 | 	writel(host->clkrt, host->base + MMC_CLKRT); | 
 |  | 
 | 	writel(START_CLOCK, host->base + MMC_STRPCL); | 
 |  | 
 | 	pxamci_enable_irq(host, END_CMD_RES); | 
 | } | 
 |  | 
 | static void pxamci_finish_request(struct pxamci_host *host, struct mmc_request *mrq) | 
 | { | 
 | 	DBG("PXAMCI: request done\n"); | 
 | 	host->mrq = NULL; | 
 | 	host->cmd = NULL; | 
 | 	host->data = NULL; | 
 | 	mmc_request_done(host->mmc, mrq); | 
 | } | 
 |  | 
 | static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat) | 
 | { | 
 | 	struct mmc_command *cmd = host->cmd; | 
 | 	int i; | 
 | 	u32 v; | 
 |  | 
 | 	if (!cmd) | 
 | 		return 0; | 
 |  | 
 | 	host->cmd = NULL; | 
 |  | 
 | 	/* | 
 | 	 * Did I mention this is Sick.  We always need to | 
 | 	 * discard the upper 8 bits of the first 16-bit word. | 
 | 	 */ | 
 | 	v = readl(host->base + MMC_RES) & 0xffff; | 
 | 	for (i = 0; i < 4; i++) { | 
 | 		u32 w1 = readl(host->base + MMC_RES) & 0xffff; | 
 | 		u32 w2 = readl(host->base + MMC_RES) & 0xffff; | 
 | 		cmd->resp[i] = v << 24 | w1 << 8 | w2 >> 8; | 
 | 		v = w2; | 
 | 	} | 
 |  | 
 | 	if (stat & STAT_TIME_OUT_RESPONSE) { | 
 | 		cmd->error = MMC_ERR_TIMEOUT; | 
 | 	} else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) { | 
 | #ifdef CONFIG_PXA27x | 
 | 		/* | 
 | 		 * workaround for erratum #42: | 
 | 		 * Intel PXA27x Family Processor Specification Update Rev 001 | 
 | 		 */ | 
 | 		if (cmd->opcode == MMC_ALL_SEND_CID || | 
 | 		    cmd->opcode == MMC_SEND_CSD || | 
 | 		    cmd->opcode == MMC_SEND_CID) { | 
 | 			/* a bogus CRC error can appear if the msb of | 
 | 			   the 15 byte response is a one */ | 
 | 			if ((cmd->resp[0] & 0x80000000) == 0) | 
 | 				cmd->error = MMC_ERR_BADCRC; | 
 | 		} else { | 
 | 			DBG("ignoring CRC from command %d - *risky*\n",cmd->opcode); | 
 | 		} | 
 | #else | 
 | 		cmd->error = MMC_ERR_BADCRC; | 
 | #endif | 
 | 	} | 
 |  | 
 | 	pxamci_disable_irq(host, END_CMD_RES); | 
 | 	if (host->data && cmd->error == MMC_ERR_NONE) { | 
 | 		pxamci_enable_irq(host, DATA_TRAN_DONE); | 
 | 	} else { | 
 | 		pxamci_finish_request(host, host->mrq); | 
 | 	} | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | static int pxamci_data_done(struct pxamci_host *host, unsigned int stat) | 
 | { | 
 | 	struct mmc_data *data = host->data; | 
 |  | 
 | 	if (!data) | 
 | 		return 0; | 
 |  | 
 | 	DCSR(host->dma) = 0; | 
 | 	dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len, | 
 | 		     host->dma_dir); | 
 |  | 
 | 	if (stat & STAT_READ_TIME_OUT) | 
 | 		data->error = MMC_ERR_TIMEOUT; | 
 | 	else if (stat & (STAT_CRC_READ_ERROR|STAT_CRC_WRITE_ERROR)) | 
 | 		data->error = MMC_ERR_BADCRC; | 
 |  | 
 | 	/* | 
 | 	 * There appears to be a hardware design bug here.  There seems to | 
 | 	 * be no way to find out how much data was transferred to the card. | 
 | 	 * This means that if there was an error on any block, we mark all | 
 | 	 * data blocks as being in error. | 
 | 	 */ | 
 | 	if (data->error == MMC_ERR_NONE) | 
 | 		data->bytes_xfered = data->blocks << data->blksz_bits; | 
 | 	else | 
 | 		data->bytes_xfered = 0; | 
 |  | 
 | 	pxamci_disable_irq(host, DATA_TRAN_DONE); | 
 |  | 
 | 	host->data = NULL; | 
 | 	if (host->mrq->stop && data->error == MMC_ERR_NONE) { | 
 | 		pxamci_stop_clock(host); | 
 | 		pxamci_start_cmd(host, host->mrq->stop, 0); | 
 | 	} else { | 
 | 		pxamci_finish_request(host, host->mrq); | 
 | 	} | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | static irqreturn_t pxamci_irq(int irq, void *devid, struct pt_regs *regs) | 
 | { | 
 | 	struct pxamci_host *host = devid; | 
 | 	unsigned int ireg; | 
 | 	int handled = 0; | 
 |  | 
 | 	ireg = readl(host->base + MMC_I_REG); | 
 |  | 
 | 	DBG("PXAMCI: irq %08x\n", ireg); | 
 |  | 
 | 	if (ireg) { | 
 | 		unsigned stat = readl(host->base + MMC_STAT); | 
 |  | 
 | 		DBG("PXAMCI: stat %08x\n", stat); | 
 |  | 
 | 		if (ireg & END_CMD_RES) | 
 | 			handled |= pxamci_cmd_done(host, stat); | 
 | 		if (ireg & DATA_TRAN_DONE) | 
 | 			handled |= pxamci_data_done(host, stat); | 
 | 	} | 
 |  | 
 | 	return IRQ_RETVAL(handled); | 
 | } | 
 |  | 
 | static void pxamci_request(struct mmc_host *mmc, struct mmc_request *mrq) | 
 | { | 
 | 	struct pxamci_host *host = mmc_priv(mmc); | 
 | 	unsigned int cmdat; | 
 |  | 
 | 	WARN_ON(host->mrq != NULL); | 
 |  | 
 | 	host->mrq = mrq; | 
 |  | 
 | 	pxamci_stop_clock(host); | 
 |  | 
 | 	cmdat = host->cmdat; | 
 | 	host->cmdat &= ~CMDAT_INIT; | 
 |  | 
 | 	if (mrq->data) { | 
 | 		pxamci_setup_data(host, mrq->data); | 
 |  | 
 | 		cmdat &= ~CMDAT_BUSY; | 
 | 		cmdat |= CMDAT_DATAEN | CMDAT_DMAEN; | 
 | 		if (mrq->data->flags & MMC_DATA_WRITE) | 
 | 			cmdat |= CMDAT_WRITE; | 
 |  | 
 | 		if (mrq->data->flags & MMC_DATA_STREAM) | 
 | 			cmdat |= CMDAT_STREAM; | 
 | 	} | 
 |  | 
 | 	pxamci_start_cmd(host, mrq->cmd, cmdat); | 
 | } | 
 |  | 
 | static int pxamci_get_ro(struct mmc_host *mmc) | 
 | { | 
 | 	struct pxamci_host *host = mmc_priv(mmc); | 
 |  | 
 | 	if (host->pdata && host->pdata->get_ro) | 
 | 		return host->pdata->get_ro(mmc->dev); | 
 | 	/* Host doesn't support read only detection so assume writeable */ | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) | 
 | { | 
 | 	struct pxamci_host *host = mmc_priv(mmc); | 
 |  | 
 | 	DBG("pxamci_set_ios: clock %u power %u vdd %u.%02u\n", | 
 | 	    ios->clock, ios->power_mode, ios->vdd / 100, | 
 | 	    ios->vdd % 100); | 
 |  | 
 | 	if (ios->clock) { | 
 | 		unsigned int clk = CLOCKRATE / ios->clock; | 
 | 		if (CLOCKRATE / clk > ios->clock) | 
 | 			clk <<= 1; | 
 | 		host->clkrt = fls(clk) - 1; | 
 | 		pxa_set_cken(CKEN12_MMC, 1); | 
 |  | 
 | 		/* | 
 | 		 * we write clkrt on the next command | 
 | 		 */ | 
 | 	} else { | 
 | 		pxamci_stop_clock(host); | 
 | 		pxa_set_cken(CKEN12_MMC, 0); | 
 | 	} | 
 |  | 
 | 	if (host->power_mode != ios->power_mode) { | 
 | 		host->power_mode = ios->power_mode; | 
 |  | 
 | 		if (host->pdata && host->pdata->setpower) | 
 | 			host->pdata->setpower(mmc->dev, ios->vdd); | 
 |  | 
 | 		if (ios->power_mode == MMC_POWER_ON) | 
 | 			host->cmdat |= CMDAT_INIT; | 
 | 	} | 
 |  | 
 | 	DBG("pxamci_set_ios: clkrt = %x cmdat = %x\n", | 
 | 	    host->clkrt, host->cmdat); | 
 | } | 
 |  | 
 | static struct mmc_host_ops pxamci_ops = { | 
 | 	.request	= pxamci_request, | 
 | 	.get_ro		= pxamci_get_ro, | 
 | 	.set_ios	= pxamci_set_ios, | 
 | }; | 
 |  | 
 | static void pxamci_dma_irq(int dma, void *devid, struct pt_regs *regs) | 
 | { | 
 | 	printk(KERN_ERR "DMA%d: IRQ???\n", dma); | 
 | 	DCSR(dma) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR; | 
 | } | 
 |  | 
 | static irqreturn_t pxamci_detect_irq(int irq, void *devid, struct pt_regs *regs) | 
 | { | 
 | 	struct pxamci_host *host = mmc_priv(devid); | 
 |  | 
 | 	mmc_detect_change(devid, host->pdata->detect_delay); | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int pxamci_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct mmc_host *mmc; | 
 | 	struct pxamci_host *host = NULL; | 
 | 	struct resource *r; | 
 | 	int ret, irq; | 
 |  | 
 | 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
 | 	irq = platform_get_irq(pdev, 0); | 
 | 	if (!r || irq == NO_IRQ) | 
 | 		return -ENXIO; | 
 |  | 
 | 	r = request_mem_region(r->start, SZ_4K, DRIVER_NAME); | 
 | 	if (!r) | 
 | 		return -EBUSY; | 
 |  | 
 | 	mmc = mmc_alloc_host(sizeof(struct pxamci_host), &pdev->dev); | 
 | 	if (!mmc) { | 
 | 		ret = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	mmc->ops = &pxamci_ops; | 
 | 	mmc->f_min = CLOCKRATE_MIN; | 
 | 	mmc->f_max = CLOCKRATE_MAX; | 
 |  | 
 | 	/* | 
 | 	 * We can do SG-DMA, but we don't because we never know how much | 
 | 	 * data we successfully wrote to the card. | 
 | 	 */ | 
 | 	mmc->max_phys_segs = NR_SG; | 
 |  | 
 | 	/* | 
 | 	 * Our hardware DMA can handle a maximum of one page per SG entry. | 
 | 	 */ | 
 | 	mmc->max_seg_size = PAGE_SIZE; | 
 |  | 
 | 	host = mmc_priv(mmc); | 
 | 	host->mmc = mmc; | 
 | 	host->dma = -1; | 
 | 	host->pdata = pdev->dev.platform_data; | 
 | 	mmc->ocr_avail = host->pdata ? | 
 | 			 host->pdata->ocr_mask : | 
 | 			 MMC_VDD_32_33|MMC_VDD_33_34; | 
 |  | 
 | 	host->sg_cpu = dma_alloc_coherent(&pdev->dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL); | 
 | 	if (!host->sg_cpu) { | 
 | 		ret = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	spin_lock_init(&host->lock); | 
 | 	host->res = r; | 
 | 	host->irq = irq; | 
 | 	host->imask = MMC_I_MASK_ALL; | 
 |  | 
 | 	host->base = ioremap(r->start, SZ_4K); | 
 | 	if (!host->base) { | 
 | 		ret = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Ensure that the host controller is shut down, and setup | 
 | 	 * with our defaults. | 
 | 	 */ | 
 | 	pxamci_stop_clock(host); | 
 | 	writel(0, host->base + MMC_SPI); | 
 | 	writel(64, host->base + MMC_RESTO); | 
 | 	writel(host->imask, host->base + MMC_I_MASK); | 
 |  | 
 | 	host->dma = pxa_request_dma(DRIVER_NAME, DMA_PRIO_LOW, | 
 | 				    pxamci_dma_irq, host); | 
 | 	if (host->dma < 0) { | 
 | 		ret = -EBUSY; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	ret = request_irq(host->irq, pxamci_irq, 0, DRIVER_NAME, host); | 
 | 	if (ret) | 
 | 		goto out; | 
 |  | 
 | 	platform_set_drvdata(pdev, mmc); | 
 |  | 
 | 	if (host->pdata && host->pdata->init) | 
 | 		host->pdata->init(&pdev->dev, pxamci_detect_irq, mmc); | 
 |  | 
 | 	mmc_add_host(mmc); | 
 |  | 
 | 	return 0; | 
 |  | 
 |  out: | 
 | 	if (host) { | 
 | 		if (host->dma >= 0) | 
 | 			pxa_free_dma(host->dma); | 
 | 		if (host->base) | 
 | 			iounmap(host->base); | 
 | 		if (host->sg_cpu) | 
 | 			dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); | 
 | 	} | 
 | 	if (mmc) | 
 | 		mmc_free_host(mmc); | 
 | 	release_resource(r); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int pxamci_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct mmc_host *mmc = platform_get_drvdata(pdev); | 
 |  | 
 | 	platform_set_drvdata(pdev, NULL); | 
 |  | 
 | 	if (mmc) { | 
 | 		struct pxamci_host *host = mmc_priv(mmc); | 
 |  | 
 | 		if (host->pdata && host->pdata->exit) | 
 | 			host->pdata->exit(&pdev->dev, mmc); | 
 |  | 
 | 		mmc_remove_host(mmc); | 
 |  | 
 | 		pxamci_stop_clock(host); | 
 | 		writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD| | 
 | 		       END_CMD_RES|PRG_DONE|DATA_TRAN_DONE, | 
 | 		       host->base + MMC_I_MASK); | 
 |  | 
 | 		DRCMRRXMMC = 0; | 
 | 		DRCMRTXMMC = 0; | 
 |  | 
 | 		free_irq(host->irq, host); | 
 | 		pxa_free_dma(host->dma); | 
 | 		iounmap(host->base); | 
 | 		dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma); | 
 |  | 
 | 		release_resource(host->res); | 
 |  | 
 | 		mmc_free_host(mmc); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 | static int pxamci_suspend(struct platform_device *dev, pm_message_t state) | 
 | { | 
 | 	struct mmc_host *mmc = platform_get_drvdata(dev); | 
 | 	int ret = 0; | 
 |  | 
 | 	if (mmc) | 
 | 		ret = mmc_suspend_host(mmc, state); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int pxamci_resume(struct platform_device *dev) | 
 | { | 
 | 	struct mmc_host *mmc = platform_get_drvdata(dev); | 
 | 	int ret = 0; | 
 |  | 
 | 	if (mmc) | 
 | 		ret = mmc_resume_host(mmc); | 
 |  | 
 | 	return ret; | 
 | } | 
 | #else | 
 | #define pxamci_suspend	NULL | 
 | #define pxamci_resume	NULL | 
 | #endif | 
 |  | 
 | static struct platform_driver pxamci_driver = { | 
 | 	.probe		= pxamci_probe, | 
 | 	.remove		= pxamci_remove, | 
 | 	.suspend	= pxamci_suspend, | 
 | 	.resume		= pxamci_resume, | 
 | 	.driver		= { | 
 | 		.name	= DRIVER_NAME, | 
 | 	}, | 
 | }; | 
 |  | 
 | static int __init pxamci_init(void) | 
 | { | 
 | 	return platform_driver_register(&pxamci_driver); | 
 | } | 
 |  | 
 | static void __exit pxamci_exit(void) | 
 | { | 
 | 	platform_driver_unregister(&pxamci_driver); | 
 | } | 
 |  | 
 | module_init(pxamci_init); | 
 | module_exit(pxamci_exit); | 
 |  | 
 | MODULE_DESCRIPTION("PXA Multimedia Card Interface Driver"); | 
 | MODULE_LICENSE("GPL"); |