ASoC: msm: Add I2S support for MDM9x15.
Add changes to enable I2S interface for MDM9x15.
Interface detection between slimbus and I2S is
done at codec init. Driver and functions for that
interface are called during routing. Proper amix
controls for the interface should be used.
Change-Id: I18a8ffab0d2fcdfebf460435eb81e8dacc38e25b
Signed-off-by: Venkat Sudhir <vsudhir@codeaurora.org>
diff --git a/arch/arm/mach-msm/devices-9615.c b/arch/arm/mach-msm/devices-9615.c
index c084d29..8eb1580 100644
--- a/arch/arm/mach-msm/devices-9615.c
+++ b/arch/arm/mach-msm/devices-9615.c
@@ -62,6 +62,9 @@
#define MSM_PMIC1_SSBI_CMD_PHYS 0x00500000
#define MSM_PMIC_SSBI_SIZE SZ_4K
+#define MSM_GPIO_I2C_CLK 16
+#define MSM_GPIO_I2C_SDA 17
+
static struct msm_watchdog_pdata msm_watchdog_pdata = {
.pet_time = 10000,
.bark_time = 11000,
@@ -307,6 +310,19 @@
.end = GSBI5_QUP_IRQ,
.flags = IORESOURCE_IRQ,
},
+ {
+ .name = "i2c_clk",
+ .start = MSM_GPIO_I2C_CLK,
+ .end = MSM_GPIO_I2C_CLK,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "i2c_sda",
+ .start = MSM_GPIO_I2C_SDA,
+ .end = MSM_GPIO_I2C_SDA,
+ .flags = IORESOURCE_IO,
+
+ },
};
struct platform_device msm9615_device_qup_i2c_gsbi5 = {
@@ -472,6 +488,15 @@
.id = -1,
};
+struct platform_device msm_i2s_cpudai0 = {
+ .name = "msm-dai-q6",
+ .id = PRIMARY_I2S_RX,
+};
+
+struct platform_device msm_i2s_cpudai1 = {
+ .name = "msm-dai-q6",
+ .id = PRIMARY_I2S_TX,
+};
struct platform_device msm_voip = {
.name = "msm-voip-dsp",
.id = -1,