Merge tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6
Pull MTD changes from David Woodhouse:
- Artem's cleanup of the MTD API continues apace.
- Fixes and improvements for ST FSMC and SuperH FLCTL NAND, amongst
others.
- More work on DiskOnChip G3, new driver for DiskOnChip G4.
- Clean up debug/warning printks in JFFS2 to use pr_<level>.
Fix up various trivial conflicts, largely due to changes in calling
conventions for things like dmaengine_prep_slave_sg() (new inline
wrapper to hide new parameter, clashing with rewrite of previously last
parameter that used to be an 'append' flag, and is now a bitmap of
'unsigned long flags').
(Also some header file fallout - like so many merges this merge window -
and silly conflicts with sparse fixes)
* tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6: (120 commits)
mtd: docg3 add protection against concurrency
mtd: docg3 refactor cascade floors structure
mtd: docg3 increase write/erase timeout
mtd: docg3 fix inbound calculations
mtd: nand: gpmi: fix function annotations
mtd: phram: fix section mismatch for phram_setup
mtd: unify initialization of erase_info->fail_addr
mtd: support ONFI multi lun NAND
mtd: sm_ftl: fix typo in major number.
mtd: add device-tree support to spear_smi
mtd: spear_smi: Remove default partition information from driver
mtd: Add device-tree support to fsmc_nand
mtd: fix section mismatch for doc_probe_device
mtd: nand/fsmc: Remove sparse warnings and errors
mtd: nand/fsmc: Add DMA support
mtd: nand/fsmc: Access the NAND device word by word whenever possible
mtd: nand/fsmc: Use dev_err to report error scenario
mtd: nand/fsmc: Use devm routines
mtd: nand/fsmc: Modify fsmc driver to accept nand timing parameters via platform
mtd: fsmc_nand: add pm callbacks to support hibernation
...
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index a3c4de5..7d17cec 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -314,6 +314,26 @@
load time (assuming you build diskonchip as a module) with the module
parameter "inftl_bbt_write=1".
+config MTD_NAND_DOCG4
+ tristate "Support for DiskOnChip G4 (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select BCH
+ select BITREVERSE
+ help
+ Support for diskonchip G4 nand flash, found in various smartphones and
+ PDAs, among them the Palm Treo680, HTC Prophet and Wizard, Toshiba
+ Portege G900, Asus P526, and O2 XDA Zinc.
+
+ With this driver you will be able to use UBI and create a ubifs on the
+ device, so you may wish to consider enabling UBI and UBIFS as well.
+
+ These devices ship with the Mys/Sandisk SAFTL formatting, for which
+ there is currently no mtd parser, so you may want to use command line
+ partitioning to segregate write-protected blocks. On the Treo680, the
+ first five erase blocks (256KiB each) are write-protected, followed
+ by the block containing the saftl partition table. This is probably
+ typical.
+
config MTD_NAND_SHARPSL
tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
depends on ARCH_PXA
@@ -421,7 +441,6 @@
config MTD_NAND_GPMI_NAND
bool "GPMI NAND Flash Controller driver"
depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28)
- select MTD_CMDLINE_PARTS
help
Enables NAND Flash support for IMX23 or IMX28.
The GPMI controller is very powerful, with the help of BCH
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 19bc8cb..d4b4d87 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -19,6 +19,7 @@
obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o
obj-$(CONFIG_MTD_NAND_DAVINCI) += davinci_nand.o
obj-$(CONFIG_MTD_NAND_DISKONCHIP) += diskonchip.o
+obj-$(CONFIG_MTD_NAND_DOCG4) += docg4.o
obj-$(CONFIG_MTD_NAND_FSMC) += fsmc_nand.o
obj-$(CONFIG_MTD_NAND_H1900) += h1910.o
obj-$(CONFIG_MTD_NAND_RTC_FROM4) += rtc_from4.o
diff --git a/drivers/mtd/nand/alauda.c b/drivers/mtd/nand/alauda.c
index 6a5ff64..4f20e1d 100644
--- a/drivers/mtd/nand/alauda.c
+++ b/drivers/mtd/nand/alauda.c
@@ -585,12 +585,13 @@
mtd->writesize = 1<<card->pageshift;
mtd->type = MTD_NANDFLASH;
mtd->flags = MTD_CAP_NANDFLASH;
- mtd->read = alauda_read;
- mtd->write = alauda_write;
- mtd->erase = alauda_erase;
- mtd->block_isbad = alauda_isbad;
+ mtd->_read = alauda_read;
+ mtd->_write = alauda_write;
+ mtd->_erase = alauda_erase;
+ mtd->_block_isbad = alauda_isbad;
mtd->priv = al;
mtd->owner = THIS_MODULE;
+ mtd->ecc_strength = 1;
err = mtd_device_register(mtd, NULL, 0);
if (err) {
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index ae7e37d..2165576 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -603,6 +603,7 @@
nand_chip->ecc.hwctl = atmel_nand_hwctl;
nand_chip->ecc.read_page = atmel_nand_read_page;
nand_chip->ecc.bytes = 4;
+ nand_chip->ecc.strength = 1;
}
nand_chip->chip_delay = 20; /* 20us command delay time */
diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c
index 64c9cba..6908cdd 100644
--- a/drivers/mtd/nand/bcm_umi_nand.c
+++ b/drivers/mtd/nand/bcm_umi_nand.c
@@ -475,6 +475,14 @@
largepage_bbt.options = NAND_BBT_SCAN2NDPAGE;
this->badblock_pattern = &largepage_bbt;
}
+
+ /*
+ * FIXME: ecc strength value of 6 bits per 512 bytes of data is a
+ * conservative guess, given 13 ecc bytes and using bch alg.
+ * (Assume Galois field order m=15 to allow a margin of error.)
+ */
+ this->ecc.strength = 6;
+
#endif
/* Now finish off the scan, now that ecc.layout has been initialized. */
@@ -487,7 +495,7 @@
/* Register the partitions */
board_mtd->name = "bcm_umi-nand";
- mtd_device_parse_register(board_mtd, NULL, 0, NULL, 0);
+ mtd_device_parse_register(board_mtd, NULL, NULL, NULL, 0);
/* Return happy */
return 0;
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index dd899cb..d7b86b9 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -702,9 +702,11 @@
if (likely(mtd->writesize >= 512)) {
chip->ecc.size = 512;
chip->ecc.bytes = 6;
+ chip->ecc.strength = 2;
} else {
chip->ecc.size = 256;
chip->ecc.bytes = 3;
+ chip->ecc.strength = 1;
bfin_write_NFC_CTL(bfin_read_NFC_CTL() & ~(1 << NFC_PG_SIZE_OFFSET));
SSYNC();
}
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
index 72d3f23..2a96e1a 100644
--- a/drivers/mtd/nand/cafe_nand.c
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -783,6 +783,7 @@
cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
cafe->nand.ecc.size = mtd->writesize;
cafe->nand.ecc.bytes = 14;
+ cafe->nand.ecc.strength = 4;
cafe->nand.ecc.hwctl = (void *)cafe_nand_bug;
cafe->nand.ecc.calculate = (void *)cafe_nand_bug;
cafe->nand.ecc.correct = (void *)cafe_nand_bug;
@@ -799,7 +800,7 @@
pci_set_drvdata(pdev, mtd);
mtd->name = "cafe_nand";
- mtd_device_parse_register(mtd, part_probes, 0, NULL, 0);
+ mtd_device_parse_register(mtd, part_probes, NULL, NULL, 0);
goto out;
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
index 737ef9a..1024bfc 100644
--- a/drivers/mtd/nand/cmx270_nand.c
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -219,7 +219,7 @@
}
/* Register the partitions */
- ret = mtd_device_parse_register(cmx270_nand_mtd, NULL, 0,
+ ret = mtd_device_parse_register(cmx270_nand_mtd, NULL, NULL,
partition_info, NUM_PARTITIONS);
if (ret)
goto err_scan;
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index 414afa7..821c34c 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -248,6 +248,8 @@
goto out_ior;
}
+ this->ecc.strength = 1;
+
new_mtd->name = kasprintf(GFP_KERNEL, "cs553x_nand_cs%d", cs);
cs553x_mtd[cs] = new_mtd;
@@ -313,7 +315,7 @@
for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
if (cs553x_mtd[i]) {
/* If any devices registered, return success. Else the last error. */
- mtd_device_parse_register(cs553x_mtd[i], NULL, 0,
+ mtd_device_parse_register(cs553x_mtd[i], NULL, NULL,
NULL, 0);
err = 0;
}
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 6e56615..d94b03c 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -641,6 +641,7 @@
info->chip.ecc.bytes = 3;
}
info->chip.ecc.size = 512;
+ info->chip.ecc.strength = pdata->ecc_bits;
break;
default:
ret = -EINVAL;
@@ -752,8 +753,8 @@
if (ret < 0)
goto err_scan;
- ret = mtd_device_parse_register(&info->mtd, NULL, 0,
- pdata->parts, pdata->nr_parts);
+ ret = mtd_device_parse_register(&info->mtd, NULL, NULL, pdata->parts,
+ pdata->nr_parts);
if (ret < 0)
goto err_scan;
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 3984d48..a9e57d6 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1590,6 +1590,7 @@
ECC_15BITS * (denali->mtd.writesize /
ECC_SECTOR_SIZE)))) {
/* if MLC OOB size is large enough, use 15bit ECC*/
+ denali->nand.ecc.strength = 15;
denali->nand.ecc.layout = &nand_15bit_oob;
denali->nand.ecc.bytes = ECC_15BITS;
iowrite32(15, denali->flash_reg + ECC_CORRECTION);
@@ -1600,12 +1601,14 @@
" contain 8bit ECC correction codes");
goto failed_req_irq;
} else {
+ denali->nand.ecc.strength = 8;
denali->nand.ecc.layout = &nand_8bit_oob;
denali->nand.ecc.bytes = ECC_8BITS;
iowrite32(8, denali->flash_reg + ECC_CORRECTION);
}
denali->nand.ecc.bytes *= denali->devnum;
+ denali->nand.ecc.strength *= denali->devnum;
denali->nand.ecc.layout->eccbytes *=
denali->mtd.writesize / ECC_SECTOR_SIZE;
denali->nand.ecc.layout->oobfree[0].offset =
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index df921e7..e2ca067 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -1653,6 +1653,7 @@
nand->ecc.mode = NAND_ECC_HW_SYNDROME;
nand->ecc.size = 512;
nand->ecc.bytes = 6;
+ nand->ecc.strength = 2;
nand->bbt_options = NAND_BBT_USE_FLASH;
doc->physadr = physadr;
diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
new file mode 100644
index 0000000..b082026
--- /dev/null
+++ b/drivers/mtd/nand/docg4.c
@@ -0,0 +1,1377 @@
+/*
+ * Copyright © 2012 Mike Dunn <mikedunn@newsguy.com>
+ *
+ * mtd nand driver for M-Systems DiskOnChip G4
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Tested on the Palm Treo 680. The G4 is also present on Toshiba Portege, Asus
+ * P526, some HTC smartphones (Wizard, Prophet, ...), O2 XDA Zinc, maybe others.
+ * Should work on these as well. Let me know!
+ *
+ * TODO:
+ *
+ * Mechanism for management of password-protected areas
+ *
+ * Hamming ecc when reading oob only
+ *
+ * According to the M-Sys documentation, this device is also available in a
+ * "dual-die" configuration having a 256MB capacity, but no mechanism for
+ * detecting this variant is documented. Currently this driver assumes 128MB
+ * capacity.
+ *
+ * Support for multiple cascaded devices ("floors"). Not sure which gadgets
+ * contain multiple G4s in a cascaded configuration, if any.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/bch.h>
+#include <linux/bitrev.h>
+
+/*
+ * You'll want to ignore badblocks if you're reading a partition that contains
+ * data written by the TrueFFS library (i.e., by PalmOS, Windows, etc), since
+ * it does not use mtd nand's method for marking bad blocks (using oob area).
+ * This will also skip the check of the "page written" flag.
+ */
+static bool ignore_badblocks;
+module_param(ignore_badblocks, bool, 0);
+MODULE_PARM_DESC(ignore_badblocks, "no badblock checking performed");
+
+struct docg4_priv {
+ struct mtd_info *mtd;
+ struct device *dev;
+ void __iomem *virtadr;
+ int status;
+ struct {
+ unsigned int command;
+ int column;
+ int page;
+ } last_command;
+ uint8_t oob_buf[16];
+ uint8_t ecc_buf[7];
+ int oob_page;
+ struct bch_control *bch;
+};
+
+/*
+ * Defines prefixed with DOCG4 are unique to the diskonchip G4. All others are
+ * shared with other diskonchip devices (P3, G3 at least).
+ *
+ * Functions with names prefixed with docg4_ are mtd / nand interface functions
+ * (though they may also be called internally). All others are internal.
+ */
+
+#define DOC_IOSPACE_DATA 0x0800
+
+/* register offsets */
+#define DOC_CHIPID 0x1000
+#define DOC_DEVICESELECT 0x100a
+#define DOC_ASICMODE 0x100c
+#define DOC_DATAEND 0x101e
+#define DOC_NOP 0x103e
+
+#define DOC_FLASHSEQUENCE 0x1032
+#define DOC_FLASHCOMMAND 0x1034
+#define DOC_FLASHADDRESS 0x1036
+#define DOC_FLASHCONTROL 0x1038
+#define DOC_ECCCONF0 0x1040
+#define DOC_ECCCONF1 0x1042
+#define DOC_HAMMINGPARITY 0x1046
+#define DOC_BCH_SYNDROM(idx) (0x1048 + idx)
+
+#define DOC_ASICMODECONFIRM 0x1072
+#define DOC_CHIPID_INV 0x1074
+#define DOC_POWERMODE 0x107c
+
+#define DOCG4_MYSTERY_REG 0x1050
+
+/* apparently used only to write oob bytes 6 and 7 */
+#define DOCG4_OOB_6_7 0x1052
+
+/* DOC_FLASHSEQUENCE register commands */
+#define DOC_SEQ_RESET 0x00
+#define DOCG4_SEQ_PAGE_READ 0x03
+#define DOCG4_SEQ_FLUSH 0x29
+#define DOCG4_SEQ_PAGEWRITE 0x16
+#define DOCG4_SEQ_PAGEPROG 0x1e
+#define DOCG4_SEQ_BLOCKERASE 0x24
+
+/* DOC_FLASHCOMMAND register commands */
+#define DOCG4_CMD_PAGE_READ 0x00
+#define DOC_CMD_ERASECYCLE2 0xd0
+#define DOCG4_CMD_FLUSH 0x70
+#define DOCG4_CMD_READ2 0x30
+#define DOC_CMD_PROG_BLOCK_ADDR 0x60
+#define DOCG4_CMD_PAGEWRITE 0x80
+#define DOC_CMD_PROG_CYCLE2 0x10
+#define DOC_CMD_RESET 0xff
+
+/* DOC_POWERMODE register bits */
+#define DOC_POWERDOWN_READY 0x80
+
+/* DOC_FLASHCONTROL register bits */
+#define DOC_CTRL_CE 0x10
+#define DOC_CTRL_UNKNOWN 0x40
+#define DOC_CTRL_FLASHREADY 0x01
+
+/* DOC_ECCCONF0 register bits */
+#define DOC_ECCCONF0_READ_MODE 0x8000
+#define DOC_ECCCONF0_UNKNOWN 0x2000
+#define DOC_ECCCONF0_ECC_ENABLE 0x1000
+#define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff
+
+/* DOC_ECCCONF1 register bits */
+#define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80
+#define DOC_ECCCONF1_ECC_ENABLE 0x07
+#define DOC_ECCCONF1_PAGE_IS_WRITTEN 0x20
+
+/* DOC_ASICMODE register bits */
+#define DOC_ASICMODE_RESET 0x00
+#define DOC_ASICMODE_NORMAL 0x01
+#define DOC_ASICMODE_POWERDOWN 0x02
+#define DOC_ASICMODE_MDWREN 0x04
+#define DOC_ASICMODE_BDETCT_RESET 0x08
+#define DOC_ASICMODE_RSTIN_RESET 0x10
+#define DOC_ASICMODE_RAM_WE 0x20
+
+/* good status values read after read/write/erase operations */
+#define DOCG4_PROGSTATUS_GOOD 0x51
+#define DOCG4_PROGSTATUS_GOOD_2 0xe0
+
+/*
+ * On read operations (page and oob-only), the first byte read from I/O reg is a
+ * status. On error, it reads 0x73; otherwise, it reads either 0x71 (first read
+ * after reset only) or 0x51, so bit 1 is presumed to be an error indicator.
+ */
+#define DOCG4_READ_ERROR 0x02 /* bit 1 indicates read error */
+
+/* anatomy of the device */
+#define DOCG4_CHIP_SIZE 0x8000000
+#define DOCG4_PAGE_SIZE 0x200
+#define DOCG4_PAGES_PER_BLOCK 0x200
+#define DOCG4_BLOCK_SIZE (DOCG4_PAGES_PER_BLOCK * DOCG4_PAGE_SIZE)
+#define DOCG4_NUMBLOCKS (DOCG4_CHIP_SIZE / DOCG4_BLOCK_SIZE)
+#define DOCG4_OOB_SIZE 0x10
+#define DOCG4_CHIP_SHIFT 27 /* log_2(DOCG4_CHIP_SIZE) */
+#define DOCG4_PAGE_SHIFT 9 /* log_2(DOCG4_PAGE_SIZE) */
+#define DOCG4_ERASE_SHIFT 18 /* log_2(DOCG4_BLOCK_SIZE) */
+
+/* all but the last byte is included in ecc calculation */
+#define DOCG4_BCH_SIZE (DOCG4_PAGE_SIZE + DOCG4_OOB_SIZE - 1)
+
+#define DOCG4_USERDATA_LEN 520 /* 512 byte page plus 8 oob avail to user */
+
+/* expected values from the ID registers */
+#define DOCG4_IDREG1_VALUE 0x0400
+#define DOCG4_IDREG2_VALUE 0xfbff
+
+/* primitive polynomial used to build the Galois field used by hw ecc gen */
+#define DOCG4_PRIMITIVE_POLY 0x4443
+
+#define DOCG4_M 14 /* Galois field is of order 2^14 */
+#define DOCG4_T 4 /* BCH alg corrects up to 4 bit errors */
+
+#define DOCG4_FACTORY_BBT_PAGE 16 /* page where read-only factory bbt lives */
+
+/*
+ * Oob bytes 0 - 6 are available to the user.
+ * Byte 7 is hamming ecc for first 7 bytes. Bytes 8 - 14 are hw-generated ecc.
+ * Byte 15 (the last) is used by the driver as a "page written" flag.
+ */
+static struct nand_ecclayout docg4_oobinfo = {
+ .eccbytes = 9,
+ .eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
+ .oobavail = 7,
+ .oobfree = { {0, 7} }
+};
+
+/*
+ * The device has a nop register which M-Sys claims is for the purpose of
+ * inserting precise delays. But beware; at least some operations fail if the
+ * nop writes are replaced with a generic delay!
+ */
+static inline void write_nop(void __iomem *docptr)
+{
+ writew(0, docptr + DOC_NOP);
+}
+
+static void docg4_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ int i;
+ struct nand_chip *nand = mtd->priv;
+ uint16_t *p = (uint16_t *) buf;
+ len >>= 1;
+
+ for (i = 0; i < len; i++)
+ p[i] = readw(nand->IO_ADDR_R);
+}
+
+static void docg4_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ int i;
+ struct nand_chip *nand = mtd->priv;
+ uint16_t *p = (uint16_t *) buf;
+ len >>= 1;
+
+ for (i = 0; i < len; i++)
+ writew(p[i], nand->IO_ADDR_W);
+}
+
+static int poll_status(struct docg4_priv *doc)
+{
+ /*
+ * Busy-wait for the FLASHREADY bit to be set in the FLASHCONTROL
+ * register. Operations known to take a long time (e.g., block erase)
+ * should sleep for a while before calling this.
+ */
+
+ uint16_t flash_status;
+ unsigned int timeo;
+ void __iomem *docptr = doc->virtadr;
+
+ dev_dbg(doc->dev, "%s...\n", __func__);
+
+ /* hardware quirk requires reading twice initially */
+ flash_status = readw(docptr + DOC_FLASHCONTROL);
+
+ timeo = 1000;
+ do {
+ cpu_relax();
+ flash_status = readb(docptr + DOC_FLASHCONTROL);
+ } while (!(flash_status & DOC_CTRL_FLASHREADY) && --timeo);
+
+
+ if (!timeo) {
+ dev_err(doc->dev, "%s: timed out!\n", __func__);
+ return NAND_STATUS_FAIL;
+ }
+
+ if (unlikely(timeo < 50))
+ dev_warn(doc->dev, "%s: nearly timed out; %d remaining\n",
+ __func__, timeo);
+
+ return 0;
+}
+
+
+static int docg4_wait(struct mtd_info *mtd, struct nand_chip *nand)
+{
+
+ struct docg4_priv *doc = nand->priv;
+ int status = NAND_STATUS_WP; /* inverse logic?? */
+ dev_dbg(doc->dev, "%s...\n", __func__);
+
+ /* report any previously unreported error */
+ if (doc->status) {
+ status |= doc->status;
+ doc->status = 0;
+ return status;
+ }
+
+ status |= poll_status(doc);
+ return status;
+}
+
+static void docg4_select_chip(struct mtd_info *mtd, int chip)
+{
+ /*
+ * Select among multiple cascaded chips ("floors"). Multiple floors are
+ * not yet supported, so the only valid non-negative value is 0.
+ */
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+
+ dev_dbg(doc->dev, "%s: chip %d\n", __func__, chip);
+
+ if (chip < 0)
+ return; /* deselected */
+
+ if (chip > 0)
+ dev_warn(doc->dev, "multiple floors currently unsupported\n");
+
+ writew(0, docptr + DOC_DEVICESELECT);
+}
+
+static void reset(struct mtd_info *mtd)
+{
+ /* full device reset */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+
+ writew(DOC_ASICMODE_RESET | DOC_ASICMODE_MDWREN,
+ docptr + DOC_ASICMODE);
+ writew(~(DOC_ASICMODE_RESET | DOC_ASICMODE_MDWREN),
+ docptr + DOC_ASICMODECONFIRM);
+ write_nop(docptr);
+
+ writew(DOC_ASICMODE_NORMAL | DOC_ASICMODE_MDWREN,
+ docptr + DOC_ASICMODE);
+ writew(~(DOC_ASICMODE_NORMAL | DOC_ASICMODE_MDWREN),
+ docptr + DOC_ASICMODECONFIRM);
+
+ writew(DOC_ECCCONF1_ECC_ENABLE, docptr + DOC_ECCCONF1);
+
+ poll_status(doc);
+}
+
+static void read_hw_ecc(void __iomem *docptr, uint8_t *ecc_buf)
+{
+ /* read the 7 hw-generated ecc bytes */
+
+ int i;
+ for (i = 0; i < 7; i++) { /* hw quirk; read twice */
+ ecc_buf[i] = readb(docptr + DOC_BCH_SYNDROM(i));
+ ecc_buf[i] = readb(docptr + DOC_BCH_SYNDROM(i));
+ }
+}
+
+static int correct_data(struct mtd_info *mtd, uint8_t *buf, int page)
+{
+ /*
+ * Called after a page read when hardware reports bitflips.
+ * Up to four bitflips can be corrected.
+ */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+ int i, numerrs, errpos[4];
+ const uint8_t blank_read_hwecc[8] = {
+ 0xcf, 0x72, 0xfc, 0x1b, 0xa9, 0xc7, 0xb9, 0 };
+
+ read_hw_ecc(docptr, doc->ecc_buf); /* read 7 hw-generated ecc bytes */
+
+ /* check if read error is due to a blank page */
+ if (!memcmp(doc->ecc_buf, blank_read_hwecc, 7))
+ return 0; /* yes */
+
+ /* skip additional check of "written flag" if ignore_badblocks */
+ if (ignore_badblocks == false) {
+
+ /*
+ * If the hw ecc bytes are not those of a blank page, there's
+ * still a chance that the page is blank, but was read with
+ * errors. Check the "written flag" in last oob byte, which
+ * is set to zero when a page is written. If more than half
+ * the bits are set, assume a blank page. Unfortunately, the
+ * bit flips(s) are not reported in stats.
+ */
+
+ if (doc->oob_buf[15]) {
+ int bit, numsetbits = 0;
+ unsigned long written_flag = doc->oob_buf[15];
+ for_each_set_bit(bit, &written_flag, 8)
+ numsetbits++;
+ if (numsetbits > 4) { /* assume blank */
+ dev_warn(doc->dev,
+ "error(s) in blank page "
+ "at offset %08x\n",
+ page * DOCG4_PAGE_SIZE);
+ return 0;
+ }
+ }
+ }
+
+ /*
+ * The hardware ecc unit produces oob_ecc ^ calc_ecc. The kernel's bch
+ * algorithm is used to decode this. However the hw operates on page
+ * data in a bit order that is the reverse of that of the bch alg,
+ * requiring that the bits be reversed on the result. Thanks to Ivan
+ * Djelic for his analysis!
+ */
+ for (i = 0; i < 7; i++)
+ doc->ecc_buf[i] = bitrev8(doc->ecc_buf[i]);
+
+ numerrs = decode_bch(doc->bch, NULL, DOCG4_USERDATA_LEN, NULL,
+ doc->ecc_buf, NULL, errpos);
+
+ if (numerrs == -EBADMSG) {
+ dev_warn(doc->dev, "uncorrectable errors at offset %08x\n",
+ page * DOCG4_PAGE_SIZE);
+ return -EBADMSG;
+ }
+
+ BUG_ON(numerrs < 0); /* -EINVAL, or anything other than -EBADMSG */
+
+ /* undo last step in BCH alg (modulo mirroring not needed) */
+ for (i = 0; i < numerrs; i++)
+ errpos[i] = (errpos[i] & ~7)|(7-(errpos[i] & 7));
+
+ /* fix the errors */
+ for (i = 0; i < numerrs; i++) {
+
+ /* ignore if error within oob ecc bytes */
+ if (errpos[i] > DOCG4_USERDATA_LEN * 8)
+ continue;
+
+ /* if error within oob area preceeding ecc bytes... */
+ if (errpos[i] > DOCG4_PAGE_SIZE * 8)
+ change_bit(errpos[i] - DOCG4_PAGE_SIZE * 8,
+ (unsigned long *)doc->oob_buf);
+
+ else /* error in page data */
+ change_bit(errpos[i], (unsigned long *)buf);
+ }
+
+ dev_notice(doc->dev, "%d error(s) corrected at offset %08x\n",
+ numerrs, page * DOCG4_PAGE_SIZE);
+
+ return numerrs;
+}
+
+static uint8_t docg4_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+
+ dev_dbg(doc->dev, "%s\n", __func__);
+
+ if (doc->last_command.command == NAND_CMD_STATUS) {
+ int status;
+
+ /*
+ * Previous nand command was status request, so nand
+ * infrastructure code expects to read the status here. If an
+ * error occurred in a previous operation, report it.
+ */
+ doc->last_command.command = 0;
+
+ if (doc->status) {
+ status = doc->status;
+ doc->status = 0;
+ }
+
+ /* why is NAND_STATUS_WP inverse logic?? */
+ else
+ status = NAND_STATUS_WP | NAND_STATUS_READY;
+
+ return status;
+ }
+
+ dev_warn(doc->dev, "unexpectd call to read_byte()\n");
+
+ return 0;
+}
+
+static void write_addr(struct docg4_priv *doc, uint32_t docg4_addr)
+{
+ /* write the four address bytes packed in docg4_addr to the device */
+
+ void __iomem *docptr = doc->virtadr;
+ writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+ docg4_addr >>= 8;
+ writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+ docg4_addr >>= 8;
+ writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+ docg4_addr >>= 8;
+ writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+}
+
+static int read_progstatus(struct docg4_priv *doc)
+{
+ /*
+ * This apparently checks the status of programming. Done after an
+ * erasure, and after page data is written. On error, the status is
+ * saved, to be later retrieved by the nand infrastructure code.
+ */
+ void __iomem *docptr = doc->virtadr;
+
+ /* status is read from the I/O reg */
+ uint16_t status1 = readw(docptr + DOC_IOSPACE_DATA);
+ uint16_t status2 = readw(docptr + DOC_IOSPACE_DATA);
+ uint16_t status3 = readw(docptr + DOCG4_MYSTERY_REG);
+
+ dev_dbg(doc->dev, "docg4: %s: %02x %02x %02x\n",
+ __func__, status1, status2, status3);
+
+ if (status1 != DOCG4_PROGSTATUS_GOOD
+ || status2 != DOCG4_PROGSTATUS_GOOD_2
+ || status3 != DOCG4_PROGSTATUS_GOOD_2) {
+ doc->status = NAND_STATUS_FAIL;
+ dev_warn(doc->dev, "read_progstatus failed: "
+ "%02x, %02x, %02x\n", status1, status2, status3);
+ return -EIO;
+ }
+ return 0;
+}
+
+static int pageprog(struct mtd_info *mtd)
+{
+ /*
+ * Final step in writing a page. Writes the contents of its
+ * internal buffer out to the flash array, or some such.
+ */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+ int retval = 0;
+
+ dev_dbg(doc->dev, "docg4: %s\n", __func__);
+
+ writew(DOCG4_SEQ_PAGEPROG, docptr + DOC_FLASHSEQUENCE);
+ writew(DOC_CMD_PROG_CYCLE2, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ /* Just busy-wait; usleep_range() slows things down noticeably. */
+ poll_status(doc);
+
+ writew(DOCG4_SEQ_FLUSH, docptr + DOC_FLASHSEQUENCE);
+ writew(DOCG4_CMD_FLUSH, docptr + DOC_FLASHCOMMAND);
+ writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ retval = read_progstatus(doc);
+ writew(0, docptr + DOC_DATAEND);
+ write_nop(docptr);
+ poll_status(doc);
+ write_nop(docptr);
+
+ return retval;
+}
+
+static void sequence_reset(struct mtd_info *mtd)
+{
+ /* common starting sequence for all operations */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+
+ writew(DOC_CTRL_UNKNOWN | DOC_CTRL_CE, docptr + DOC_FLASHCONTROL);
+ writew(DOC_SEQ_RESET, docptr + DOC_FLASHSEQUENCE);
+ writew(DOC_CMD_RESET, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ write_nop(docptr);
+ poll_status(doc);
+ write_nop(docptr);
+}
+
+static void read_page_prologue(struct mtd_info *mtd, uint32_t docg4_addr)
+{
+ /* first step in reading a page */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+
+ dev_dbg(doc->dev,
+ "docg4: %s: g4 page %08x\n", __func__, docg4_addr);
+
+ sequence_reset(mtd);
+
+ writew(DOCG4_SEQ_PAGE_READ, docptr + DOC_FLASHSEQUENCE);
+ writew(DOCG4_CMD_PAGE_READ, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+
+ write_addr(doc, docg4_addr);
+
+ write_nop(docptr);
+ writew(DOCG4_CMD_READ2, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ poll_status(doc);
+}
+
+static void write_page_prologue(struct mtd_info *mtd, uint32_t docg4_addr)
+{
+ /* first step in writing a page */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+
+ dev_dbg(doc->dev,
+ "docg4: %s: g4 addr: %x\n", __func__, docg4_addr);
+ sequence_reset(mtd);
+ writew(DOCG4_SEQ_PAGEWRITE, docptr + DOC_FLASHSEQUENCE);
+ writew(DOCG4_CMD_PAGEWRITE, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ write_addr(doc, docg4_addr);
+ write_nop(docptr);
+ write_nop(docptr);
+ poll_status(doc);
+}
+
+static uint32_t mtd_to_docg4_address(int page, int column)
+{
+ /*
+ * Convert mtd address to format used by the device, 32 bit packed.
+ *
+ * Some notes on G4 addressing... The M-Sys documentation on this device
+ * claims that pages are 2K in length, and indeed, the format of the
+ * address used by the device reflects that. But within each page are
+ * four 512 byte "sub-pages", each with its own oob data that is
+ * read/written immediately after the 512 bytes of page data. This oob
+ * data contains the ecc bytes for the preceeding 512 bytes.
+ *
+ * Rather than tell the mtd nand infrastructure that page size is 2k,
+ * with four sub-pages each, we engage in a little subterfuge and tell
+ * the infrastructure code that pages are 512 bytes in size. This is
+ * done because during the course of reverse-engineering the device, I
+ * never observed an instance where an entire 2K "page" was read or
+ * written as a unit. Each "sub-page" is always addressed individually,
+ * its data read/written, and ecc handled before the next "sub-page" is
+ * addressed.
+ *
+ * This requires us to convert addresses passed by the mtd nand
+ * infrastructure code to those used by the device.
+ *
+ * The address that is written to the device consists of four bytes: the
+ * first two are the 2k page number, and the second is the index into
+ * the page. The index is in terms of 16-bit half-words and includes
+ * the preceeding oob data, so e.g., the index into the second
+ * "sub-page" is 0x108, and the full device address of the start of mtd
+ * page 0x201 is 0x00800108.
+ */
+ int g4_page = page / 4; /* device's 2K page */
+ int g4_index = (page % 4) * 0x108 + column/2; /* offset into page */
+ return (g4_page << 16) | g4_index; /* pack */
+}
+
+static void docg4_command(struct mtd_info *mtd, unsigned command, int column,
+ int page_addr)
+{
+ /* handle standard nand commands */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ uint32_t g4_addr = mtd_to_docg4_address(page_addr, column);
+
+ dev_dbg(doc->dev, "%s %x, page_addr=%x, column=%x\n",
+ __func__, command, page_addr, column);
+
+ /*
+ * Save the command and its arguments. This enables emulation of
+ * standard flash devices, and also some optimizations.
+ */
+ doc->last_command.command = command;
+ doc->last_command.column = column;
+ doc->last_command.page = page_addr;
+
+ switch (command) {
+
+ case NAND_CMD_RESET:
+ reset(mtd);
+ break;
+
+ case NAND_CMD_READ0:
+ read_page_prologue(mtd, g4_addr);
+ break;
+
+ case NAND_CMD_STATUS:
+ /* next call to read_byte() will expect a status */
+ break;
+
+ case NAND_CMD_SEQIN:
+ write_page_prologue(mtd, g4_addr);
+
+ /* hack for deferred write of oob bytes */
+ if (doc->oob_page == page_addr)
+ memcpy(nand->oob_poi, doc->oob_buf, 16);
+ break;
+
+ case NAND_CMD_PAGEPROG:
+ pageprog(mtd);
+ break;
+
+ /* we don't expect these, based on review of nand_base.c */
+ case NAND_CMD_READOOB:
+ case NAND_CMD_READID:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ dev_warn(doc->dev, "docg4_command: "
+ "unexpected nand command 0x%x\n", command);
+ break;
+
+ }
+}
+
+static int read_page(struct mtd_info *mtd, struct nand_chip *nand,
+ uint8_t *buf, int page, bool use_ecc)
+{
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+ uint16_t status, edc_err, *buf16;
+
+ dev_dbg(doc->dev, "%s: page %08x\n", __func__, page);
+
+ writew(DOC_ECCCONF0_READ_MODE |
+ DOC_ECCCONF0_ECC_ENABLE |
+ DOC_ECCCONF0_UNKNOWN |
+ DOCG4_BCH_SIZE,
+ docptr + DOC_ECCCONF0);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ /* the 1st byte from the I/O reg is a status; the rest is page data */
+ status = readw(docptr + DOC_IOSPACE_DATA);
+ if (status & DOCG4_READ_ERROR) {
+ dev_err(doc->dev,
+ "docg4_read_page: bad status: 0x%02x\n", status);
+ writew(0, docptr + DOC_DATAEND);
+ return -EIO;
+ }
+
+ dev_dbg(doc->dev, "%s: status = 0x%x\n", __func__, status);
+
+ docg4_read_buf(mtd, buf, DOCG4_PAGE_SIZE); /* read the page data */
+
+ /*
+ * Diskonchips read oob immediately after a page read. Mtd
+ * infrastructure issues a separate command for reading oob after the
+ * page is read. So we save the oob bytes in a local buffer and just
+ * copy it if the next command reads oob from the same page.
+ */
+
+ /* first 14 oob bytes read from I/O reg */
+ docg4_read_buf(mtd, doc->oob_buf, 14);
+
+ /* last 2 read from another reg */
+ buf16 = (uint16_t *)(doc->oob_buf + 14);
+ *buf16 = readw(docptr + DOCG4_MYSTERY_REG);
+
+ write_nop(docptr);
+
+ if (likely(use_ecc == true)) {
+
+ /* read the register that tells us if bitflip(s) detected */
+ edc_err = readw(docptr + DOC_ECCCONF1);
+ edc_err = readw(docptr + DOC_ECCCONF1);
+ dev_dbg(doc->dev, "%s: edc_err = 0x%02x\n", __func__, edc_err);
+
+ /* If bitflips are reported, attempt to correct with ecc */
+ if (edc_err & DOC_ECCCONF1_BCH_SYNDROM_ERR) {
+ int bits_corrected = correct_data(mtd, buf, page);
+ if (bits_corrected == -EBADMSG)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += bits_corrected;
+ }
+ }
+
+ writew(0, docptr + DOC_DATAEND);
+ return 0;
+}
+
+
+static int docg4_read_page_raw(struct mtd_info *mtd, struct nand_chip *nand,
+ uint8_t *buf, int page)
+{
+ return read_page(mtd, nand, buf, page, false);
+}
+
+static int docg4_read_page(struct mtd_info *mtd, struct nand_chip *nand,
+ uint8_t *buf, int page)
+{
+ return read_page(mtd, nand, buf, page, true);
+}
+
+static int docg4_read_oob(struct mtd_info *mtd, struct nand_chip *nand,
+ int page, int sndcmd)
+{
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+ uint16_t status;
+
+ dev_dbg(doc->dev, "%s: page %x\n", __func__, page);
+
+ /*
+ * Oob bytes are read as part of a normal page read. If the previous
+ * nand command was a read of the page whose oob is now being read, just
+ * copy the oob bytes that we saved in a local buffer and avoid a
+ * separate oob read.
+ */
+ if (doc->last_command.command == NAND_CMD_READ0 &&
+ doc->last_command.page == page) {
+ memcpy(nand->oob_poi, doc->oob_buf, 16);
+ return 0;
+ }
+
+ /*
+ * Separate read of oob data only.
+ */
+ docg4_command(mtd, NAND_CMD_READ0, nand->ecc.size, page);
+
+ writew(DOC_ECCCONF0_READ_MODE | DOCG4_OOB_SIZE, docptr + DOC_ECCCONF0);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ /* the 1st byte from the I/O reg is a status; the rest is oob data */
+ status = readw(docptr + DOC_IOSPACE_DATA);
+ if (status & DOCG4_READ_ERROR) {
+ dev_warn(doc->dev,
+ "docg4_read_oob failed: status = 0x%02x\n", status);
+ return -EIO;
+ }
+
+ dev_dbg(doc->dev, "%s: status = 0x%x\n", __func__, status);
+
+ docg4_read_buf(mtd, nand->oob_poi, 16);
+
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ writew(0, docptr + DOC_DATAEND);
+ write_nop(docptr);
+
+ return 0;
+}
+
+static void docg4_erase_block(struct mtd_info *mtd, int page)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+ uint16_t g4_page;
+
+ dev_dbg(doc->dev, "%s: page %04x\n", __func__, page);
+
+ sequence_reset(mtd);
+
+ writew(DOCG4_SEQ_BLOCKERASE, docptr + DOC_FLASHSEQUENCE);
+ writew(DOC_CMD_PROG_BLOCK_ADDR, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+
+ /* only 2 bytes of address are written to specify erase block */
+ g4_page = (uint16_t)(page / 4); /* to g4's 2k page addressing */
+ writeb(g4_page & 0xff, docptr + DOC_FLASHADDRESS);
+ g4_page >>= 8;
+ writeb(g4_page & 0xff, docptr + DOC_FLASHADDRESS);
+ write_nop(docptr);
+
+ /* start the erasure */
+ writew(DOC_CMD_ERASECYCLE2, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ usleep_range(500, 1000); /* erasure is long; take a snooze */
+ poll_status(doc);
+ writew(DOCG4_SEQ_FLUSH, docptr + DOC_FLASHSEQUENCE);
+ writew(DOCG4_CMD_FLUSH, docptr + DOC_FLASHCOMMAND);
+ writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ read_progstatus(doc);
+
+ writew(0, docptr + DOC_DATAEND);
+ write_nop(docptr);
+ poll_status(doc);
+ write_nop(docptr);
+}
+
+static void write_page(struct mtd_info *mtd, struct nand_chip *nand,
+ const uint8_t *buf, bool use_ecc)
+{
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+ uint8_t ecc_buf[8];
+
+ dev_dbg(doc->dev, "%s...\n", __func__);
+
+ writew(DOC_ECCCONF0_ECC_ENABLE |
+ DOC_ECCCONF0_UNKNOWN |
+ DOCG4_BCH_SIZE,
+ docptr + DOC_ECCCONF0);
+ write_nop(docptr);
+
+ /* write the page data */
+ docg4_write_buf16(mtd, buf, DOCG4_PAGE_SIZE);
+
+ /* oob bytes 0 through 5 are written to I/O reg */
+ docg4_write_buf16(mtd, nand->oob_poi, 6);
+
+ /* oob byte 6 written to a separate reg */
+ writew(nand->oob_poi[6], docptr + DOCG4_OOB_6_7);
+
+ write_nop(docptr);
+ write_nop(docptr);
+
+ /* write hw-generated ecc bytes to oob */
+ if (likely(use_ecc == true)) {
+ /* oob byte 7 is hamming code */
+ uint8_t hamming = readb(docptr + DOC_HAMMINGPARITY);
+ hamming = readb(docptr + DOC_HAMMINGPARITY); /* 2nd read */
+ writew(hamming, docptr + DOCG4_OOB_6_7);
+ write_nop(docptr);
+
+ /* read the 7 bch bytes from ecc regs */
+ read_hw_ecc(docptr, ecc_buf);
+ ecc_buf[7] = 0; /* clear the "page written" flag */
+ }
+
+ /* write user-supplied bytes to oob */
+ else {
+ writew(nand->oob_poi[7], docptr + DOCG4_OOB_6_7);
+ write_nop(docptr);
+ memcpy(ecc_buf, &nand->oob_poi[8], 8);
+ }
+
+ docg4_write_buf16(mtd, ecc_buf, 8);
+ write_nop(docptr);
+ write_nop(docptr);
+ writew(0, docptr + DOC_DATAEND);
+ write_nop(docptr);
+}
+
+static void docg4_write_page_raw(struct mtd_info *mtd, struct nand_chip *nand,
+ const uint8_t *buf)
+{
+ return write_page(mtd, nand, buf, false);
+}
+
+static void docg4_write_page(struct mtd_info *mtd, struct nand_chip *nand,
+ const uint8_t *buf)
+{
+ return write_page(mtd, nand, buf, true);
+}
+
+static int docg4_write_oob(struct mtd_info *mtd, struct nand_chip *nand,
+ int page)
+{
+ /*
+ * Writing oob-only is not really supported, because MLC nand must write
+ * oob bytes at the same time as page data. Nonetheless, we save the
+ * oob buffer contents here, and then write it along with the page data
+ * if the same page is subsequently written. This allows user space
+ * utilities that write the oob data prior to the page data to work
+ * (e.g., nandwrite). The disdvantage is that, if the intention was to
+ * write oob only, the operation is quietly ignored. Also, oob can get
+ * corrupted if two concurrent processes are running nandwrite.
+ */
+
+ /* note that bytes 7..14 are hw generated hamming/ecc and overwritten */
+ struct docg4_priv *doc = nand->priv;
+ doc->oob_page = page;
+ memcpy(doc->oob_buf, nand->oob_poi, 16);
+ return 0;
+}
+
+static int __init read_factory_bbt(struct mtd_info *mtd)
+{
+ /*
+ * The device contains a read-only factory bad block table. Read it and
+ * update the memory-based bbt accordingly.
+ */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ uint32_t g4_addr = mtd_to_docg4_address(DOCG4_FACTORY_BBT_PAGE, 0);
+ uint8_t *buf;
+ int i, block, status;
+
+ buf = kzalloc(DOCG4_PAGE_SIZE, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ read_page_prologue(mtd, g4_addr);
+ status = docg4_read_page(mtd, nand, buf, DOCG4_FACTORY_BBT_PAGE);
+ if (status)
+ goto exit;
+
+ /*
+ * If no memory-based bbt was created, exit. This will happen if module
+ * parameter ignore_badblocks is set. Then why even call this function?
+ * For an unknown reason, block erase always fails if it's the first
+ * operation after device power-up. The above read ensures it never is.
+ * Ugly, I know.
+ */
+ if (nand->bbt == NULL) /* no memory-based bbt */
+ goto exit;
+
+ /*
+ * Parse factory bbt and update memory-based bbt. Factory bbt format is
+ * simple: one bit per block, block numbers increase left to right (msb
+ * to lsb). Bit clear means bad block.
+ */
+ for (i = block = 0; block < DOCG4_NUMBLOCKS; block += 8, i++) {
+ int bitnum;
+ unsigned long bits = ~buf[i];
+ for_each_set_bit(bitnum, &bits, 8) {
+ int badblock = block + 7 - bitnum;
+ nand->bbt[badblock / 4] |=
+ 0x03 << ((badblock % 4) * 2);
+ mtd->ecc_stats.badblocks++;
+ dev_notice(doc->dev, "factory-marked bad block: %d\n",
+ badblock);
+ }
+ }
+ exit:
+ kfree(buf);
+ return status;
+}
+
+static int docg4_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ /*
+ * Mark a block as bad. Bad blocks are marked in the oob area of the
+ * first page of the block. The default scan_bbt() in the nand
+ * infrastructure code works fine for building the memory-based bbt
+ * during initialization, as does the nand infrastructure function that
+ * checks if a block is bad by reading the bbt. This function replaces
+ * the nand default because writes to oob-only are not supported.
+ */
+
+ int ret, i;
+ uint8_t *buf;
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ struct nand_bbt_descr *bbtd = nand->badblock_pattern;
+ int block = (int)(ofs >> nand->bbt_erase_shift);
+ int page = (int)(ofs >> nand->page_shift);
+ uint32_t g4_addr = mtd_to_docg4_address(page, 0);
+
+ dev_dbg(doc->dev, "%s: %08llx\n", __func__, ofs);
+
+ if (unlikely(ofs & (DOCG4_BLOCK_SIZE - 1)))
+ dev_warn(doc->dev, "%s: ofs %llx not start of block!\n",
+ __func__, ofs);
+
+ /* allocate blank buffer for page data */
+ buf = kzalloc(DOCG4_PAGE_SIZE, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ /* update bbt in memory */
+ nand->bbt[block / 4] |= 0x01 << ((block & 0x03) * 2);
+
+ /* write bit-wise negation of pattern to oob buffer */
+ memset(nand->oob_poi, 0xff, mtd->oobsize);
+ for (i = 0; i < bbtd->len; i++)
+ nand->oob_poi[bbtd->offs + i] = ~bbtd->pattern[i];
+
+ /* write first page of block */
+ write_page_prologue(mtd, g4_addr);
+ docg4_write_page(mtd, nand, buf);
+ ret = pageprog(mtd);
+ if (!ret)
+ mtd->ecc_stats.badblocks++;
+
+ kfree(buf);
+
+ return ret;
+}
+
+static int docg4_block_neverbad(struct mtd_info *mtd, loff_t ofs, int getchip)
+{
+ /* only called when module_param ignore_badblocks is set */
+ return 0;
+}
+
+static int docg4_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ /*
+ * Put the device into "deep power-down" mode. Note that CE# must be
+ * deasserted for this to take effect. The xscale, e.g., can be
+ * configured to float this signal when the processor enters power-down,
+ * and a suitable pull-up ensures its deassertion.
+ */
+
+ int i;
+ uint8_t pwr_down;
+ struct docg4_priv *doc = platform_get_drvdata(pdev);
+ void __iomem *docptr = doc->virtadr;
+
+ dev_dbg(doc->dev, "%s...\n", __func__);
+
+ /* poll the register that tells us we're ready to go to sleep */
+ for (i = 0; i < 10; i++) {
+ pwr_down = readb(docptr + DOC_POWERMODE);
+ if (pwr_down & DOC_POWERDOWN_READY)
+ break;
+ usleep_range(1000, 4000);
+ }
+
+ if (pwr_down & DOC_POWERDOWN_READY) {
+ dev_err(doc->dev, "suspend failed; "
+ "timeout polling DOC_POWERDOWN_READY\n");
+ return -EIO;
+ }
+
+ writew(DOC_ASICMODE_POWERDOWN | DOC_ASICMODE_MDWREN,
+ docptr + DOC_ASICMODE);
+ writew(~(DOC_ASICMODE_POWERDOWN | DOC_ASICMODE_MDWREN),
+ docptr + DOC_ASICMODECONFIRM);
+
+ write_nop(docptr);
+
+ return 0;
+}
+
+static int docg4_resume(struct platform_device *pdev)
+{
+
+ /*
+ * Exit power-down. Twelve consecutive reads of the address below
+ * accomplishes this, assuming CE# has been asserted.
+ */
+
+ struct docg4_priv *doc = platform_get_drvdata(pdev);
+ void __iomem *docptr = doc->virtadr;
+ int i;
+
+ dev_dbg(doc->dev, "%s...\n", __func__);
+
+ for (i = 0; i < 12; i++)
+ readb(docptr + 0x1fff);
+
+ return 0;
+}
+
+static void __init init_mtd_structs(struct mtd_info *mtd)
+{
+ /* initialize mtd and nand data structures */
+
+ /*
+ * Note that some of the following initializations are not usually
+ * required within a nand driver because they are performed by the nand
+ * infrastructure code as part of nand_scan(). In this case they need
+ * to be initialized here because we skip call to nand_scan_ident() (the
+ * first half of nand_scan()). The call to nand_scan_ident() is skipped
+ * because for this device the chip id is not read in the manner of a
+ * standard nand device. Unfortunately, nand_scan_ident() does other
+ * things as well, such as call nand_set_defaults().
+ */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+
+ mtd->size = DOCG4_CHIP_SIZE;
+ mtd->name = "Msys_Diskonchip_G4";
+ mtd->writesize = DOCG4_PAGE_SIZE;
+ mtd->erasesize = DOCG4_BLOCK_SIZE;
+ mtd->oobsize = DOCG4_OOB_SIZE;
+ nand->chipsize = DOCG4_CHIP_SIZE;
+ nand->chip_shift = DOCG4_CHIP_SHIFT;
+ nand->bbt_erase_shift = nand->phys_erase_shift = DOCG4_ERASE_SHIFT;
+ nand->chip_delay = 20;
+ nand->page_shift = DOCG4_PAGE_SHIFT;
+ nand->pagemask = 0x3ffff;
+ nand->badblockpos = NAND_LARGE_BADBLOCK_POS;
+ nand->badblockbits = 8;
+ nand->ecc.layout = &docg4_oobinfo;
+ nand->ecc.mode = NAND_ECC_HW_SYNDROME;
+ nand->ecc.size = DOCG4_PAGE_SIZE;
+ nand->ecc.prepad = 8;
+ nand->ecc.bytes = 8;
+ nand->ecc.strength = DOCG4_T;
+ nand->options =
+ NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE | NAND_NO_AUTOINCR;
+ nand->IO_ADDR_R = nand->IO_ADDR_W = doc->virtadr + DOC_IOSPACE_DATA;
+ nand->controller = &nand->hwcontrol;
+ spin_lock_init(&nand->controller->lock);
+ init_waitqueue_head(&nand->controller->wq);
+
+ /* methods */
+ nand->cmdfunc = docg4_command;
+ nand->waitfunc = docg4_wait;
+ nand->select_chip = docg4_select_chip;
+ nand->read_byte = docg4_read_byte;
+ nand->block_markbad = docg4_block_markbad;
+ nand->read_buf = docg4_read_buf;
+ nand->write_buf = docg4_write_buf16;
+ nand->scan_bbt = nand_default_bbt;
+ nand->erase_cmd = docg4_erase_block;
+ nand->ecc.read_page = docg4_read_page;
+ nand->ecc.write_page = docg4_write_page;
+ nand->ecc.read_page_raw = docg4_read_page_raw;
+ nand->ecc.write_page_raw = docg4_write_page_raw;
+ nand->ecc.read_oob = docg4_read_oob;
+ nand->ecc.write_oob = docg4_write_oob;
+
+ /*
+ * The way the nand infrastructure code is written, a memory-based bbt
+ * is not created if NAND_SKIP_BBTSCAN is set. With no memory bbt,
+ * nand->block_bad() is used. So when ignoring bad blocks, we skip the
+ * scan and define a dummy block_bad() which always returns 0.
+ */
+ if (ignore_badblocks) {
+ nand->options |= NAND_SKIP_BBTSCAN;
+ nand->block_bad = docg4_block_neverbad;
+ }
+
+}
+
+static int __init read_id_reg(struct mtd_info *mtd)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+ uint16_t id1, id2;
+
+ /* check for presence of g4 chip by reading id registers */
+ id1 = readw(docptr + DOC_CHIPID);
+ id1 = readw(docptr + DOCG4_MYSTERY_REG);
+ id2 = readw(docptr + DOC_CHIPID_INV);
+ id2 = readw(docptr + DOCG4_MYSTERY_REG);
+
+ if (id1 == DOCG4_IDREG1_VALUE && id2 == DOCG4_IDREG2_VALUE) {
+ dev_info(doc->dev,
+ "NAND device: 128MiB Diskonchip G4 detected\n");
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
+static char const *part_probes[] = { "cmdlinepart", "saftlpart", NULL };
+
+static int __init probe_docg4(struct platform_device *pdev)
+{
+ struct mtd_info *mtd;
+ struct nand_chip *nand;
+ void __iomem *virtadr;
+ struct docg4_priv *doc;
+ int len, retval;
+ struct resource *r;
+ struct device *dev = &pdev->dev;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(dev, "no io memory resource defined!\n");
+ return -ENODEV;
+ }
+
+ virtadr = ioremap(r->start, resource_size(r));
+ if (!virtadr) {
+ dev_err(dev, "Diskonchip ioremap failed: %pR\n", r);
+ return -EIO;
+ }
+
+ len = sizeof(struct mtd_info) + sizeof(struct nand_chip) +
+ sizeof(struct docg4_priv);
+ mtd = kzalloc(len, GFP_KERNEL);
+ if (mtd == NULL) {
+ retval = -ENOMEM;
+ goto fail;
+ }
+ nand = (struct nand_chip *) (mtd + 1);
+ doc = (struct docg4_priv *) (nand + 1);
+ mtd->priv = nand;
+ nand->priv = doc;
+ mtd->owner = THIS_MODULE;
+ doc->virtadr = virtadr;
+ doc->dev = dev;
+
+ init_mtd_structs(mtd);
+
+ /* initialize kernel bch algorithm */
+ doc->bch = init_bch(DOCG4_M, DOCG4_T, DOCG4_PRIMITIVE_POLY);
+ if (doc->bch == NULL) {
+ retval = -EINVAL;
+ goto fail;
+ }
+
+ platform_set_drvdata(pdev, doc);
+
+ reset(mtd);
+ retval = read_id_reg(mtd);
+ if (retval == -ENODEV) {
+ dev_warn(dev, "No diskonchip G4 device found.\n");
+ goto fail;
+ }
+
+ retval = nand_scan_tail(mtd);
+ if (retval)
+ goto fail;
+
+ retval = read_factory_bbt(mtd);
+ if (retval)
+ goto fail;
+
+ retval = mtd_device_parse_register(mtd, part_probes, NULL, NULL, 0);
+ if (retval)
+ goto fail;
+
+ doc->mtd = mtd;
+ return 0;
+
+ fail:
+ iounmap(virtadr);
+ if (mtd) {
+ /* re-declarations avoid compiler warning */
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ nand_release(mtd); /* deletes partitions and mtd devices */
+ platform_set_drvdata(pdev, NULL);
+ free_bch(doc->bch);
+ kfree(mtd);
+ }
+
+ return retval;
+}
+
+static int __exit cleanup_docg4(struct platform_device *pdev)
+{
+ struct docg4_priv *doc = platform_get_drvdata(pdev);
+ nand_release(doc->mtd);
+ platform_set_drvdata(pdev, NULL);
+ free_bch(doc->bch);
+ kfree(doc->mtd);
+ iounmap(doc->virtadr);
+ return 0;
+}
+
+static struct platform_driver docg4_driver = {
+ .driver = {
+ .name = "docg4",
+ .owner = THIS_MODULE,
+ },
+ .suspend = docg4_suspend,
+ .resume = docg4_resume,
+ .remove = __exit_p(cleanup_docg4),
+};
+
+static int __init docg4_init(void)
+{
+ return platform_driver_probe(&docg4_driver, probe_docg4);
+}
+
+static void __exit docg4_exit(void)
+{
+ platform_driver_unregister(&docg4_driver);
+}
+
+module_init(docg4_init);
+module_exit(docg4_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mike Dunn");
+MODULE_DESCRIPTION("M-Systems DiskOnChip G4 device driver");
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 7195ee6..80b5264 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -813,6 +813,12 @@
&fsl_elbc_oob_sp_eccm1 : &fsl_elbc_oob_sp_eccm0;
chip->ecc.size = 512;
chip->ecc.bytes = 3;
+ chip->ecc.strength = 1;
+ /*
+ * FIXME: can hardware ecc correct 4 bitflips if page size is
+ * 2k? Then does hardware report number of corrections for this
+ * case? If so, ecc_stats reporting needs to be fixed as well.
+ */
} else {
/* otherwise fall back to default software ECC */
chip->ecc.mode = NAND_ECC_SOFT;
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index e53b760..1b8330e 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -17,6 +17,10 @@
*/
#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-direction.h>
+#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/module.h>
@@ -27,6 +31,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/platform_device.h>
+#include <linux/of.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
#include <linux/slab.h>
@@ -34,7 +39,7 @@
#include <linux/amba/bus.h>
#include <mtd/mtd-abi.h>
-static struct nand_ecclayout fsmc_ecc1_layout = {
+static struct nand_ecclayout fsmc_ecc1_128_layout = {
.eccbytes = 24,
.eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52,
66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116},
@@ -50,7 +55,127 @@
}
};
-static struct nand_ecclayout fsmc_ecc4_lp_layout = {
+static struct nand_ecclayout fsmc_ecc1_64_layout = {
+ .eccbytes = 12,
+ .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52},
+ .oobfree = {
+ {.offset = 8, .length = 8},
+ {.offset = 24, .length = 8},
+ {.offset = 40, .length = 8},
+ {.offset = 56, .length = 8},
+ }
+};
+
+static struct nand_ecclayout fsmc_ecc1_16_layout = {
+ .eccbytes = 3,
+ .eccpos = {2, 3, 4},
+ .oobfree = {
+ {.offset = 8, .length = 8},
+ }
+};
+
+/*
+ * ECC4 layout for NAND of pagesize 8192 bytes & OOBsize 256 bytes. 13*16 bytes
+ * of OB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 46
+ * bytes are free for use.
+ */
+static struct nand_ecclayout fsmc_ecc4_256_layout = {
+ .eccbytes = 208,
+ .eccpos = { 2, 3, 4, 5, 6, 7, 8,
+ 9, 10, 11, 12, 13, 14,
+ 18, 19, 20, 21, 22, 23, 24,
+ 25, 26, 27, 28, 29, 30,
+ 34, 35, 36, 37, 38, 39, 40,
+ 41, 42, 43, 44, 45, 46,
+ 50, 51, 52, 53, 54, 55, 56,
+ 57, 58, 59, 60, 61, 62,
+ 66, 67, 68, 69, 70, 71, 72,
+ 73, 74, 75, 76, 77, 78,
+ 82, 83, 84, 85, 86, 87, 88,
+ 89, 90, 91, 92, 93, 94,
+ 98, 99, 100, 101, 102, 103, 104,
+ 105, 106, 107, 108, 109, 110,
+ 114, 115, 116, 117, 118, 119, 120,
+ 121, 122, 123, 124, 125, 126,
+ 130, 131, 132, 133, 134, 135, 136,
+ 137, 138, 139, 140, 141, 142,
+ 146, 147, 148, 149, 150, 151, 152,
+ 153, 154, 155, 156, 157, 158,
+ 162, 163, 164, 165, 166, 167, 168,
+ 169, 170, 171, 172, 173, 174,
+ 178, 179, 180, 181, 182, 183, 184,
+ 185, 186, 187, 188, 189, 190,
+ 194, 195, 196, 197, 198, 199, 200,
+ 201, 202, 203, 204, 205, 206,
+ 210, 211, 212, 213, 214, 215, 216,
+ 217, 218, 219, 220, 221, 222,
+ 226, 227, 228, 229, 230, 231, 232,
+ 233, 234, 235, 236, 237, 238,
+ 242, 243, 244, 245, 246, 247, 248,
+ 249, 250, 251, 252, 253, 254
+ },
+ .oobfree = {
+ {.offset = 15, .length = 3},
+ {.offset = 31, .length = 3},
+ {.offset = 47, .length = 3},
+ {.offset = 63, .length = 3},
+ {.offset = 79, .length = 3},
+ {.offset = 95, .length = 3},
+ {.offset = 111, .length = 3},
+ {.offset = 127, .length = 3},
+ {.offset = 143, .length = 3},
+ {.offset = 159, .length = 3},
+ {.offset = 175, .length = 3},
+ {.offset = 191, .length = 3},
+ {.offset = 207, .length = 3},
+ {.offset = 223, .length = 3},
+ {.offset = 239, .length = 3},
+ {.offset = 255, .length = 1}
+ }
+};
+
+/*
+ * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 224 bytes. 13*8 bytes
+ * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 118
+ * bytes are free for use.
+ */
+static struct nand_ecclayout fsmc_ecc4_224_layout = {
+ .eccbytes = 104,
+ .eccpos = { 2, 3, 4, 5, 6, 7, 8,
+ 9, 10, 11, 12, 13, 14,
+ 18, 19, 20, 21, 22, 23, 24,
+ 25, 26, 27, 28, 29, 30,
+ 34, 35, 36, 37, 38, 39, 40,
+ 41, 42, 43, 44, 45, 46,
+ 50, 51, 52, 53, 54, 55, 56,
+ 57, 58, 59, 60, 61, 62,
+ 66, 67, 68, 69, 70, 71, 72,
+ 73, 74, 75, 76, 77, 78,
+ 82, 83, 84, 85, 86, 87, 88,
+ 89, 90, 91, 92, 93, 94,
+ 98, 99, 100, 101, 102, 103, 104,
+ 105, 106, 107, 108, 109, 110,
+ 114, 115, 116, 117, 118, 119, 120,
+ 121, 122, 123, 124, 125, 126
+ },
+ .oobfree = {
+ {.offset = 15, .length = 3},
+ {.offset = 31, .length = 3},
+ {.offset = 47, .length = 3},
+ {.offset = 63, .length = 3},
+ {.offset = 79, .length = 3},
+ {.offset = 95, .length = 3},
+ {.offset = 111, .length = 3},
+ {.offset = 127, .length = 97}
+ }
+};
+
+/*
+ * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 128 bytes. 13*8 bytes
+ * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 22
+ * bytes are free for use.
+ */
+static struct nand_ecclayout fsmc_ecc4_128_layout = {
.eccbytes = 104,
.eccpos = { 2, 3, 4, 5, 6, 7, 8,
9, 10, 11, 12, 13, 14,
@@ -82,6 +207,45 @@
};
/*
+ * ECC4 layout for NAND of pagesize 2048 bytes & OOBsize 64 bytes. 13*4 bytes of
+ * OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 10
+ * bytes are free for use.
+ */
+static struct nand_ecclayout fsmc_ecc4_64_layout = {
+ .eccbytes = 52,
+ .eccpos = { 2, 3, 4, 5, 6, 7, 8,
+ 9, 10, 11, 12, 13, 14,
+ 18, 19, 20, 21, 22, 23, 24,
+ 25, 26, 27, 28, 29, 30,
+ 34, 35, 36, 37, 38, 39, 40,
+ 41, 42, 43, 44, 45, 46,
+ 50, 51, 52, 53, 54, 55, 56,
+ 57, 58, 59, 60, 61, 62,
+ },
+ .oobfree = {
+ {.offset = 15, .length = 3},
+ {.offset = 31, .length = 3},
+ {.offset = 47, .length = 3},
+ {.offset = 63, .length = 1},
+ }
+};
+
+/*
+ * ECC4 layout for NAND of pagesize 512 bytes & OOBsize 16 bytes. 13 bytes of
+ * OOB size is reserved for ECC, Byte no. 4 & 5 reserved for bad block and One
+ * byte is free for use.
+ */
+static struct nand_ecclayout fsmc_ecc4_16_layout = {
+ .eccbytes = 13,
+ .eccpos = { 0, 1, 2, 3, 6, 7, 8,
+ 9, 10, 11, 12, 13, 14
+ },
+ .oobfree = {
+ {.offset = 15, .length = 1},
+ }
+};
+
+/*
* ECC placement definitions in oobfree type format.
* There are 13 bytes of ecc for every 512 byte block and it has to be read
* consecutively and immediately after the 512 byte data block for hardware to
@@ -103,16 +267,6 @@
}
};
-static struct nand_ecclayout fsmc_ecc4_sp_layout = {
- .eccbytes = 13,
- .eccpos = { 0, 1, 2, 3, 6, 7, 8,
- 9, 10, 11, 12, 13, 14
- },
- .oobfree = {
- {.offset = 15, .length = 1},
- }
-};
-
static struct fsmc_eccplace fsmc_ecc4_sp_place = {
.eccplace = {
{.offset = 0, .length = 4},
@@ -120,75 +274,24 @@
}
};
-/*
- * Default partition tables to be used if the partition information not
- * provided through platform data.
- *
- * Default partition layout for small page(= 512 bytes) devices
- * Size for "Root file system" is updated in driver based on actual device size
- */
-static struct mtd_partition partition_info_16KB_blk[] = {
- {
- .name = "X-loader",
- .offset = 0,
- .size = 4*0x4000,
- },
- {
- .name = "U-Boot",
- .offset = 0x10000,
- .size = 20*0x4000,
- },
- {
- .name = "Kernel",
- .offset = 0x60000,
- .size = 256*0x4000,
- },
- {
- .name = "Root File System",
- .offset = 0x460000,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-/*
- * Default partition layout for large page(> 512 bytes) devices
- * Size for "Root file system" is updated in driver based on actual device size
- */
-static struct mtd_partition partition_info_128KB_blk[] = {
- {
- .name = "X-loader",
- .offset = 0,
- .size = 4*0x20000,
- },
- {
- .name = "U-Boot",
- .offset = 0x80000,
- .size = 12*0x20000,
- },
- {
- .name = "Kernel",
- .offset = 0x200000,
- .size = 48*0x20000,
- },
- {
- .name = "Root File System",
- .offset = 0x800000,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-
/**
* struct fsmc_nand_data - structure for FSMC NAND device state
*
* @pid: Part ID on the AMBA PrimeCell format
* @mtd: MTD info for a NAND flash.
* @nand: Chip related info for a NAND flash.
+ * @partitions: Partition info for a NAND Flash.
+ * @nr_partitions: Total number of partition of a NAND flash.
*
* @ecc_place: ECC placing locations in oobfree type format.
* @bank: Bank number for probed device.
* @clk: Clock structure for FSMC.
*
+ * @read_dma_chan: DMA channel for read access
+ * @write_dma_chan: DMA channel for write access to NAND
+ * @dma_access_complete: Completion structure
+ *
+ * @data_pa: NAND Physical port for Data.
* @data_va: NAND port for Data.
* @cmd_va: NAND port for Command.
* @addr_va: NAND port for Address.
@@ -198,16 +301,23 @@
u32 pid;
struct mtd_info mtd;
struct nand_chip nand;
+ struct mtd_partition *partitions;
+ unsigned int nr_partitions;
struct fsmc_eccplace *ecc_place;
unsigned int bank;
+ struct device *dev;
+ enum access_mode mode;
struct clk *clk;
- struct resource *resregs;
- struct resource *rescmd;
- struct resource *resaddr;
- struct resource *resdata;
+ /* DMA related objects */
+ struct dma_chan *read_dma_chan;
+ struct dma_chan *write_dma_chan;
+ struct completion dma_access_complete;
+ struct fsmc_nand_timings *dev_timings;
+
+ dma_addr_t data_pa;
void __iomem *data_va;
void __iomem *cmd_va;
void __iomem *addr_va;
@@ -251,28 +361,29 @@
struct nand_chip *this = mtd->priv;
struct fsmc_nand_data *host = container_of(mtd,
struct fsmc_nand_data, mtd);
- struct fsmc_regs *regs = host->regs_va;
+ void *__iomem *regs = host->regs_va;
unsigned int bank = host->bank;
if (ctrl & NAND_CTRL_CHANGE) {
+ u32 pc;
+
if (ctrl & NAND_CLE) {
- this->IO_ADDR_R = (void __iomem *)host->cmd_va;
- this->IO_ADDR_W = (void __iomem *)host->cmd_va;
+ this->IO_ADDR_R = host->cmd_va;
+ this->IO_ADDR_W = host->cmd_va;
} else if (ctrl & NAND_ALE) {
- this->IO_ADDR_R = (void __iomem *)host->addr_va;
- this->IO_ADDR_W = (void __iomem *)host->addr_va;
+ this->IO_ADDR_R = host->addr_va;
+ this->IO_ADDR_W = host->addr_va;
} else {
- this->IO_ADDR_R = (void __iomem *)host->data_va;
- this->IO_ADDR_W = (void __iomem *)host->data_va;
+ this->IO_ADDR_R = host->data_va;
+ this->IO_ADDR_W = host->data_va;
}
- if (ctrl & NAND_NCE) {
- writel(readl(®s->bank_regs[bank].pc) | FSMC_ENABLE,
- ®s->bank_regs[bank].pc);
- } else {
- writel(readl(®s->bank_regs[bank].pc) & ~FSMC_ENABLE,
- ®s->bank_regs[bank].pc);
- }
+ pc = readl(FSMC_NAND_REG(regs, bank, PC));
+ if (ctrl & NAND_NCE)
+ pc |= FSMC_ENABLE;
+ else
+ pc &= ~FSMC_ENABLE;
+ writel(pc, FSMC_NAND_REG(regs, bank, PC));
}
mb();
@@ -287,22 +398,42 @@
* This routine initializes timing parameters related to NAND memory access in
* FSMC registers
*/
-static void __init fsmc_nand_setup(struct fsmc_regs *regs, uint32_t bank,
- uint32_t busw)
+static void fsmc_nand_setup(void __iomem *regs, uint32_t bank,
+ uint32_t busw, struct fsmc_nand_timings *timings)
{
uint32_t value = FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON;
+ uint32_t tclr, tar, thiz, thold, twait, tset;
+ struct fsmc_nand_timings *tims;
+ struct fsmc_nand_timings default_timings = {
+ .tclr = FSMC_TCLR_1,
+ .tar = FSMC_TAR_1,
+ .thiz = FSMC_THIZ_1,
+ .thold = FSMC_THOLD_4,
+ .twait = FSMC_TWAIT_6,
+ .tset = FSMC_TSET_0,
+ };
+
+ if (timings)
+ tims = timings;
+ else
+ tims = &default_timings;
+
+ tclr = (tims->tclr & FSMC_TCLR_MASK) << FSMC_TCLR_SHIFT;
+ tar = (tims->tar & FSMC_TAR_MASK) << FSMC_TAR_SHIFT;
+ thiz = (tims->thiz & FSMC_THIZ_MASK) << FSMC_THIZ_SHIFT;
+ thold = (tims->thold & FSMC_THOLD_MASK) << FSMC_THOLD_SHIFT;
+ twait = (tims->twait & FSMC_TWAIT_MASK) << FSMC_TWAIT_SHIFT;
+ tset = (tims->tset & FSMC_TSET_MASK) << FSMC_TSET_SHIFT;
if (busw)
- writel(value | FSMC_DEVWID_16, ®s->bank_regs[bank].pc);
+ writel(value | FSMC_DEVWID_16, FSMC_NAND_REG(regs, bank, PC));
else
- writel(value | FSMC_DEVWID_8, ®s->bank_regs[bank].pc);
+ writel(value | FSMC_DEVWID_8, FSMC_NAND_REG(regs, bank, PC));
- writel(readl(®s->bank_regs[bank].pc) | FSMC_TCLR_1 | FSMC_TAR_1,
- ®s->bank_regs[bank].pc);
- writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
- ®s->bank_regs[bank].comm);
- writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
- ®s->bank_regs[bank].attrib);
+ writel(readl(FSMC_NAND_REG(regs, bank, PC)) | tclr | tar,
+ FSMC_NAND_REG(regs, bank, PC));
+ writel(thiz | thold | twait | tset, FSMC_NAND_REG(regs, bank, COMM));
+ writel(thiz | thold | twait | tset, FSMC_NAND_REG(regs, bank, ATTRIB));
}
/*
@@ -312,15 +443,15 @@
{
struct fsmc_nand_data *host = container_of(mtd,
struct fsmc_nand_data, mtd);
- struct fsmc_regs *regs = host->regs_va;
+ void __iomem *regs = host->regs_va;
uint32_t bank = host->bank;
- writel(readl(®s->bank_regs[bank].pc) & ~FSMC_ECCPLEN_256,
- ®s->bank_regs[bank].pc);
- writel(readl(®s->bank_regs[bank].pc) & ~FSMC_ECCEN,
- ®s->bank_regs[bank].pc);
- writel(readl(®s->bank_regs[bank].pc) | FSMC_ECCEN,
- ®s->bank_regs[bank].pc);
+ writel(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCPLEN_256,
+ FSMC_NAND_REG(regs, bank, PC));
+ writel(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCEN,
+ FSMC_NAND_REG(regs, bank, PC));
+ writel(readl(FSMC_NAND_REG(regs, bank, PC)) | FSMC_ECCEN,
+ FSMC_NAND_REG(regs, bank, PC));
}
/*
@@ -333,37 +464,42 @@
{
struct fsmc_nand_data *host = container_of(mtd,
struct fsmc_nand_data, mtd);
- struct fsmc_regs *regs = host->regs_va;
+ void __iomem *regs = host->regs_va;
uint32_t bank = host->bank;
uint32_t ecc_tmp;
unsigned long deadline = jiffies + FSMC_BUSY_WAIT_TIMEOUT;
do {
- if (readl(®s->bank_regs[bank].sts) & FSMC_CODE_RDY)
+ if (readl(FSMC_NAND_REG(regs, bank, STS)) & FSMC_CODE_RDY)
break;
else
cond_resched();
} while (!time_after_eq(jiffies, deadline));
- ecc_tmp = readl(®s->bank_regs[bank].ecc1);
+ if (time_after_eq(jiffies, deadline)) {
+ dev_err(host->dev, "calculate ecc timed out\n");
+ return -ETIMEDOUT;
+ }
+
+ ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC1));
ecc[0] = (uint8_t) (ecc_tmp >> 0);
ecc[1] = (uint8_t) (ecc_tmp >> 8);
ecc[2] = (uint8_t) (ecc_tmp >> 16);
ecc[3] = (uint8_t) (ecc_tmp >> 24);
- ecc_tmp = readl(®s->bank_regs[bank].ecc2);
+ ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC2));
ecc[4] = (uint8_t) (ecc_tmp >> 0);
ecc[5] = (uint8_t) (ecc_tmp >> 8);
ecc[6] = (uint8_t) (ecc_tmp >> 16);
ecc[7] = (uint8_t) (ecc_tmp >> 24);
- ecc_tmp = readl(®s->bank_regs[bank].ecc3);
+ ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC3));
ecc[8] = (uint8_t) (ecc_tmp >> 0);
ecc[9] = (uint8_t) (ecc_tmp >> 8);
ecc[10] = (uint8_t) (ecc_tmp >> 16);
ecc[11] = (uint8_t) (ecc_tmp >> 24);
- ecc_tmp = readl(®s->bank_regs[bank].sts);
+ ecc_tmp = readl(FSMC_NAND_REG(regs, bank, STS));
ecc[12] = (uint8_t) (ecc_tmp >> 16);
return 0;
@@ -379,11 +515,11 @@
{
struct fsmc_nand_data *host = container_of(mtd,
struct fsmc_nand_data, mtd);
- struct fsmc_regs *regs = host->regs_va;
+ void __iomem *regs = host->regs_va;
uint32_t bank = host->bank;
uint32_t ecc_tmp;
- ecc_tmp = readl(®s->bank_regs[bank].ecc1);
+ ecc_tmp = readl(FSMC_NAND_REG(regs, bank, ECC1));
ecc[0] = (uint8_t) (ecc_tmp >> 0);
ecc[1] = (uint8_t) (ecc_tmp >> 8);
ecc[2] = (uint8_t) (ecc_tmp >> 16);
@@ -391,6 +527,166 @@
return 0;
}
+/* Count the number of 0's in buff upto a max of max_bits */
+static int count_written_bits(uint8_t *buff, int size, int max_bits)
+{
+ int k, written_bits = 0;
+
+ for (k = 0; k < size; k++) {
+ written_bits += hweight8(~buff[k]);
+ if (written_bits > max_bits)
+ break;
+ }
+
+ return written_bits;
+}
+
+static void dma_complete(void *param)
+{
+ struct fsmc_nand_data *host = param;
+
+ complete(&host->dma_access_complete);
+}
+
+static int dma_xfer(struct fsmc_nand_data *host, void *buffer, int len,
+ enum dma_data_direction direction)
+{
+ struct dma_chan *chan;
+ struct dma_device *dma_dev;
+ struct dma_async_tx_descriptor *tx;
+ dma_addr_t dma_dst, dma_src, dma_addr;
+ dma_cookie_t cookie;
+ unsigned long flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
+ int ret;
+
+ if (direction == DMA_TO_DEVICE)
+ chan = host->write_dma_chan;
+ else if (direction == DMA_FROM_DEVICE)
+ chan = host->read_dma_chan;
+ else
+ return -EINVAL;
+
+ dma_dev = chan->device;
+ dma_addr = dma_map_single(dma_dev->dev, buffer, len, direction);
+
+ if (direction == DMA_TO_DEVICE) {
+ dma_src = dma_addr;
+ dma_dst = host->data_pa;
+ flags |= DMA_COMPL_SRC_UNMAP_SINGLE | DMA_COMPL_SKIP_DEST_UNMAP;
+ } else {
+ dma_src = host->data_pa;
+ dma_dst = dma_addr;
+ flags |= DMA_COMPL_DEST_UNMAP_SINGLE | DMA_COMPL_SKIP_SRC_UNMAP;
+ }
+
+ tx = dma_dev->device_prep_dma_memcpy(chan, dma_dst, dma_src,
+ len, flags);
+
+ if (!tx) {
+ dev_err(host->dev, "device_prep_dma_memcpy error\n");
+ dma_unmap_single(dma_dev->dev, dma_addr, len, direction);
+ return -EIO;
+ }
+
+ tx->callback = dma_complete;
+ tx->callback_param = host;
+ cookie = tx->tx_submit(tx);
+
+ ret = dma_submit_error(cookie);
+ if (ret) {
+ dev_err(host->dev, "dma_submit_error %d\n", cookie);
+ return ret;
+ }
+
+ dma_async_issue_pending(chan);
+
+ ret =
+ wait_for_completion_interruptible_timeout(&host->dma_access_complete,
+ msecs_to_jiffies(3000));
+ if (ret <= 0) {
+ chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
+ dev_err(host->dev, "wait_for_completion_timeout\n");
+ return ret ? ret : -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+/*
+ * fsmc_write_buf - write buffer to chip
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void fsmc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ int i;
+ struct nand_chip *chip = mtd->priv;
+
+ if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) &&
+ IS_ALIGNED(len, sizeof(uint32_t))) {
+ uint32_t *p = (uint32_t *)buf;
+ len = len >> 2;
+ for (i = 0; i < len; i++)
+ writel(p[i], chip->IO_ADDR_W);
+ } else {
+ for (i = 0; i < len; i++)
+ writeb(buf[i], chip->IO_ADDR_W);
+ }
+}
+
+/*
+ * fsmc_read_buf - read chip data into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void fsmc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ int i;
+ struct nand_chip *chip = mtd->priv;
+
+ if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) &&
+ IS_ALIGNED(len, sizeof(uint32_t))) {
+ uint32_t *p = (uint32_t *)buf;
+ len = len >> 2;
+ for (i = 0; i < len; i++)
+ p[i] = readl(chip->IO_ADDR_R);
+ } else {
+ for (i = 0; i < len; i++)
+ buf[i] = readb(chip->IO_ADDR_R);
+ }
+}
+
+/*
+ * fsmc_read_buf_dma - read chip data into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void fsmc_read_buf_dma(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct fsmc_nand_data *host;
+
+ host = container_of(mtd, struct fsmc_nand_data, mtd);
+ dma_xfer(host, buf, len, DMA_FROM_DEVICE);
+}
+
+/*
+ * fsmc_write_buf_dma - write buffer to chip
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf,
+ int len)
+{
+ struct fsmc_nand_data *host;
+
+ host = container_of(mtd, struct fsmc_nand_data, mtd);
+ dma_xfer(host, (void *)buf, len, DMA_TO_DEVICE);
+}
+
/*
* fsmc_read_page_hwecc
* @mtd: mtd info structure
@@ -426,7 +722,6 @@
uint8_t *oob = (uint8_t *)&ecc_oob[0];
for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) {
-
chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page);
chip->ecc.hwctl(mtd, NAND_ECC_READ);
chip->read_buf(mtd, p, eccsize);
@@ -437,17 +732,19 @@
group++;
/*
- * length is intentionally kept a higher multiple of 2
- * to read at least 13 bytes even in case of 16 bit NAND
- * devices
- */
- len = roundup(len, 2);
+ * length is intentionally kept a higher multiple of 2
+ * to read at least 13 bytes even in case of 16 bit NAND
+ * devices
+ */
+ if (chip->options & NAND_BUSWIDTH_16)
+ len = roundup(len, 2);
+
chip->cmdfunc(mtd, NAND_CMD_READOOB, off, page);
chip->read_buf(mtd, oob + j, len);
j += len;
}
- memcpy(&ecc_code[i], oob, 13);
+ memcpy(&ecc_code[i], oob, chip->ecc.bytes);
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
@@ -461,7 +758,7 @@
}
/*
- * fsmc_correct_data
+ * fsmc_bch8_correct_data
* @mtd: mtd info structure
* @dat: buffer of read data
* @read_ecc: ecc read from device spare area
@@ -470,19 +767,51 @@
* calc_ecc is a 104 bit information containing maximum of 8 error
* offset informations of 13 bits each in 512 bytes of read data.
*/
-static int fsmc_correct_data(struct mtd_info *mtd, uint8_t *dat,
+static int fsmc_bch8_correct_data(struct mtd_info *mtd, uint8_t *dat,
uint8_t *read_ecc, uint8_t *calc_ecc)
{
struct fsmc_nand_data *host = container_of(mtd,
struct fsmc_nand_data, mtd);
- struct fsmc_regs *regs = host->regs_va;
+ struct nand_chip *chip = mtd->priv;
+ void __iomem *regs = host->regs_va;
unsigned int bank = host->bank;
- uint16_t err_idx[8];
- uint64_t ecc_data[2];
+ uint32_t err_idx[8];
uint32_t num_err, i;
+ uint32_t ecc1, ecc2, ecc3, ecc4;
- /* The calculated ecc is actually the correction index in data */
- memcpy(ecc_data, calc_ecc, 13);
+ num_err = (readl(FSMC_NAND_REG(regs, bank, STS)) >> 10) & 0xF;
+
+ /* no bit flipping */
+ if (likely(num_err == 0))
+ return 0;
+
+ /* too many errors */
+ if (unlikely(num_err > 8)) {
+ /*
+ * This is a temporary erase check. A newly erased page read
+ * would result in an ecc error because the oob data is also
+ * erased to FF and the calculated ecc for an FF data is not
+ * FF..FF.
+ * This is a workaround to skip performing correction in case
+ * data is FF..FF
+ *
+ * Logic:
+ * For every page, each bit written as 0 is counted until these
+ * number of bits are greater than 8 (the maximum correction
+ * capability of FSMC for each 512 + 13 bytes)
+ */
+
+ int bits_ecc = count_written_bits(read_ecc, chip->ecc.bytes, 8);
+ int bits_data = count_written_bits(dat, chip->ecc.size, 8);
+
+ if ((bits_ecc + bits_data) <= 8) {
+ if (bits_data)
+ memset(dat, 0xff, chip->ecc.size);
+ return bits_data;
+ }
+
+ return -EBADMSG;
+ }
/*
* ------------------- calc_ecc[] bit wise -----------|--13 bits--|
@@ -493,27 +822,26 @@
* uint64_t array and error offset indexes are populated in err_idx
* array
*/
- for (i = 0; i < 8; i++) {
- if (i == 4) {
- err_idx[4] = ((ecc_data[1] & 0x1) << 12) | ecc_data[0];
- ecc_data[1] >>= 1;
- continue;
- }
- err_idx[i] = (ecc_data[i/4] & 0x1FFF);
- ecc_data[i/4] >>= 13;
- }
+ ecc1 = readl(FSMC_NAND_REG(regs, bank, ECC1));
+ ecc2 = readl(FSMC_NAND_REG(regs, bank, ECC2));
+ ecc3 = readl(FSMC_NAND_REG(regs, bank, ECC3));
+ ecc4 = readl(FSMC_NAND_REG(regs, bank, STS));
- num_err = (readl(®s->bank_regs[bank].sts) >> 10) & 0xF;
-
- if (num_err == 0xF)
- return -EBADMSG;
+ err_idx[0] = (ecc1 >> 0) & 0x1FFF;
+ err_idx[1] = (ecc1 >> 13) & 0x1FFF;
+ err_idx[2] = (((ecc2 >> 0) & 0x7F) << 6) | ((ecc1 >> 26) & 0x3F);
+ err_idx[3] = (ecc2 >> 7) & 0x1FFF;
+ err_idx[4] = (((ecc3 >> 0) & 0x1) << 12) | ((ecc2 >> 20) & 0xFFF);
+ err_idx[5] = (ecc3 >> 1) & 0x1FFF;
+ err_idx[6] = (ecc3 >> 14) & 0x1FFF;
+ err_idx[7] = (((ecc4 >> 16) & 0xFF) << 5) | ((ecc3 >> 27) & 0x1F);
i = 0;
while (num_err--) {
change_bit(0, (unsigned long *)&err_idx[i]);
change_bit(1, (unsigned long *)&err_idx[i]);
- if (err_idx[i] <= 512 * 8) {
+ if (err_idx[i] < chip->ecc.size * 8) {
change_bit(err_idx[i], (unsigned long *)dat);
i++;
}
@@ -521,6 +849,44 @@
return i;
}
+static bool filter(struct dma_chan *chan, void *slave)
+{
+ chan->private = slave;
+ return true;
+}
+
+#ifdef CONFIG_OF
+static int __devinit fsmc_nand_probe_config_dt(struct platform_device *pdev,
+ struct device_node *np)
+{
+ struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ u32 val;
+
+ /* Set default NAND width to 8 bits */
+ pdata->width = 8;
+ if (!of_property_read_u32(np, "bank-width", &val)) {
+ if (val == 2) {
+ pdata->width = 16;
+ } else if (val != 1) {
+ dev_err(&pdev->dev, "invalid bank-width %u\n", val);
+ return -EINVAL;
+ }
+ }
+ of_property_read_u32(np, "st,ale-off", &pdata->ale_off);
+ of_property_read_u32(np, "st,cle-off", &pdata->cle_off);
+ if (of_get_property(np, "nand-skip-bbtscan", NULL))
+ pdata->options = NAND_SKIP_BBTSCAN;
+
+ return 0;
+}
+#else
+static int __devinit fsmc_nand_probe_config_dt(struct platform_device *pdev,
+ struct device_node *np)
+{
+ return -ENOSYS;
+}
+#endif
+
/*
* fsmc_nand_probe - Probe function
* @pdev: platform device structure
@@ -528,102 +894,109 @@
static int __init fsmc_nand_probe(struct platform_device *pdev)
{
struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct device_node __maybe_unused *np = pdev->dev.of_node;
+ struct mtd_part_parser_data ppdata = {};
struct fsmc_nand_data *host;
struct mtd_info *mtd;
struct nand_chip *nand;
- struct fsmc_regs *regs;
struct resource *res;
+ dma_cap_mask_t mask;
int ret = 0;
u32 pid;
int i;
+ if (np) {
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ pdev->dev.platform_data = pdata;
+ ret = fsmc_nand_probe_config_dt(pdev, np);
+ if (ret) {
+ dev_err(&pdev->dev, "no platform data\n");
+ return -ENODEV;
+ }
+ }
+
if (!pdata) {
dev_err(&pdev->dev, "platform data is NULL\n");
return -EINVAL;
}
/* Allocate memory for the device structure (and zero it) */
- host = kzalloc(sizeof(*host), GFP_KERNEL);
+ host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
if (!host) {
dev_err(&pdev->dev, "failed to allocate device structure\n");
return -ENOMEM;
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
- if (!res) {
- ret = -EIO;
- goto err_probe1;
+ if (!res)
+ return -EINVAL;
+
+ if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res),
+ pdev->name)) {
+ dev_err(&pdev->dev, "Failed to get memory data resourse\n");
+ return -ENOENT;
}
- host->resdata = request_mem_region(res->start, resource_size(res),
- pdev->name);
- if (!host->resdata) {
- ret = -EIO;
- goto err_probe1;
- }
-
- host->data_va = ioremap(res->start, resource_size(res));
+ host->data_pa = (dma_addr_t)res->start;
+ host->data_va = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
if (!host->data_va) {
- ret = -EIO;
- goto err_probe1;
+ dev_err(&pdev->dev, "data ioremap failed\n");
+ return -ENOMEM;
}
- host->resaddr = request_mem_region(res->start + PLAT_NAND_ALE,
- resource_size(res), pdev->name);
- if (!host->resaddr) {
- ret = -EIO;
- goto err_probe1;
+ if (!devm_request_mem_region(&pdev->dev, res->start + pdata->ale_off,
+ resource_size(res), pdev->name)) {
+ dev_err(&pdev->dev, "Failed to get memory ale resourse\n");
+ return -ENOENT;
}
- host->addr_va = ioremap(res->start + PLAT_NAND_ALE, resource_size(res));
+ host->addr_va = devm_ioremap(&pdev->dev, res->start + pdata->ale_off,
+ resource_size(res));
if (!host->addr_va) {
- ret = -EIO;
- goto err_probe1;
+ dev_err(&pdev->dev, "ale ioremap failed\n");
+ return -ENOMEM;
}
- host->rescmd = request_mem_region(res->start + PLAT_NAND_CLE,
- resource_size(res), pdev->name);
- if (!host->rescmd) {
- ret = -EIO;
- goto err_probe1;
+ if (!devm_request_mem_region(&pdev->dev, res->start + pdata->cle_off,
+ resource_size(res), pdev->name)) {
+ dev_err(&pdev->dev, "Failed to get memory cle resourse\n");
+ return -ENOENT;
}
- host->cmd_va = ioremap(res->start + PLAT_NAND_CLE, resource_size(res));
+ host->cmd_va = devm_ioremap(&pdev->dev, res->start + pdata->cle_off,
+ resource_size(res));
if (!host->cmd_va) {
- ret = -EIO;
- goto err_probe1;
+ dev_err(&pdev->dev, "ale ioremap failed\n");
+ return -ENOMEM;
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fsmc_regs");
- if (!res) {
- ret = -EIO;
- goto err_probe1;
+ if (!res)
+ return -EINVAL;
+
+ if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res),
+ pdev->name)) {
+ dev_err(&pdev->dev, "Failed to get memory regs resourse\n");
+ return -ENOENT;
}
- host->resregs = request_mem_region(res->start, resource_size(res),
- pdev->name);
- if (!host->resregs) {
- ret = -EIO;
- goto err_probe1;
- }
-
- host->regs_va = ioremap(res->start, resource_size(res));
+ host->regs_va = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
if (!host->regs_va) {
- ret = -EIO;
- goto err_probe1;
+ dev_err(&pdev->dev, "regs ioremap failed\n");
+ return -ENOMEM;
}
host->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(host->clk)) {
dev_err(&pdev->dev, "failed to fetch block clock\n");
- ret = PTR_ERR(host->clk);
- host->clk = NULL;
- goto err_probe1;
+ return PTR_ERR(host->clk);
}
ret = clk_enable(host->clk);
if (ret)
- goto err_probe1;
+ goto err_clk_enable;
/*
* This device ID is actually a common AMBA ID as used on the
@@ -639,7 +1012,14 @@
host->bank = pdata->bank;
host->select_chip = pdata->select_bank;
- regs = host->regs_va;
+ host->partitions = pdata->partitions;
+ host->nr_partitions = pdata->nr_partitions;
+ host->dev = &pdev->dev;
+ host->dev_timings = pdata->nand_timings;
+ host->mode = pdata->mode;
+
+ if (host->mode == USE_DMA_ACCESS)
+ init_completion(&host->dma_access_complete);
/* Link all private pointers */
mtd = &host->mtd;
@@ -658,21 +1038,53 @@
nand->ecc.size = 512;
nand->options = pdata->options;
nand->select_chip = fsmc_select_chip;
+ nand->badblockbits = 7;
if (pdata->width == FSMC_NAND_BW16)
nand->options |= NAND_BUSWIDTH_16;
- fsmc_nand_setup(regs, host->bank, nand->options & NAND_BUSWIDTH_16);
+ switch (host->mode) {
+ case USE_DMA_ACCESS:
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_MEMCPY, mask);
+ host->read_dma_chan = dma_request_channel(mask, filter,
+ pdata->read_dma_priv);
+ if (!host->read_dma_chan) {
+ dev_err(&pdev->dev, "Unable to get read dma channel\n");
+ goto err_req_read_chnl;
+ }
+ host->write_dma_chan = dma_request_channel(mask, filter,
+ pdata->write_dma_priv);
+ if (!host->write_dma_chan) {
+ dev_err(&pdev->dev, "Unable to get write dma channel\n");
+ goto err_req_write_chnl;
+ }
+ nand->read_buf = fsmc_read_buf_dma;
+ nand->write_buf = fsmc_write_buf_dma;
+ break;
+
+ default:
+ case USE_WORD_ACCESS:
+ nand->read_buf = fsmc_read_buf;
+ nand->write_buf = fsmc_write_buf;
+ break;
+ }
+
+ fsmc_nand_setup(host->regs_va, host->bank,
+ nand->options & NAND_BUSWIDTH_16,
+ host->dev_timings);
if (AMBA_REV_BITS(host->pid) >= 8) {
nand->ecc.read_page = fsmc_read_page_hwecc;
nand->ecc.calculate = fsmc_read_hwecc_ecc4;
- nand->ecc.correct = fsmc_correct_data;
+ nand->ecc.correct = fsmc_bch8_correct_data;
nand->ecc.bytes = 13;
+ nand->ecc.strength = 8;
} else {
nand->ecc.calculate = fsmc_read_hwecc_ecc1;
nand->ecc.correct = nand_correct_data;
nand->ecc.bytes = 3;
+ nand->ecc.strength = 1;
}
/*
@@ -681,19 +1093,52 @@
if (nand_scan_ident(&host->mtd, 1, NULL)) {
ret = -ENXIO;
dev_err(&pdev->dev, "No NAND Device found!\n");
- goto err_probe;
+ goto err_scan_ident;
}
if (AMBA_REV_BITS(host->pid) >= 8) {
- if (host->mtd.writesize == 512) {
- nand->ecc.layout = &fsmc_ecc4_sp_layout;
+ switch (host->mtd.oobsize) {
+ case 16:
+ nand->ecc.layout = &fsmc_ecc4_16_layout;
host->ecc_place = &fsmc_ecc4_sp_place;
- } else {
- nand->ecc.layout = &fsmc_ecc4_lp_layout;
+ break;
+ case 64:
+ nand->ecc.layout = &fsmc_ecc4_64_layout;
host->ecc_place = &fsmc_ecc4_lp_place;
+ break;
+ case 128:
+ nand->ecc.layout = &fsmc_ecc4_128_layout;
+ host->ecc_place = &fsmc_ecc4_lp_place;
+ break;
+ case 224:
+ nand->ecc.layout = &fsmc_ecc4_224_layout;
+ host->ecc_place = &fsmc_ecc4_lp_place;
+ break;
+ case 256:
+ nand->ecc.layout = &fsmc_ecc4_256_layout;
+ host->ecc_place = &fsmc_ecc4_lp_place;
+ break;
+ default:
+ printk(KERN_WARNING "No oob scheme defined for "
+ "oobsize %d\n", mtd->oobsize);
+ BUG();
}
} else {
- nand->ecc.layout = &fsmc_ecc1_layout;
+ switch (host->mtd.oobsize) {
+ case 16:
+ nand->ecc.layout = &fsmc_ecc1_16_layout;
+ break;
+ case 64:
+ nand->ecc.layout = &fsmc_ecc1_64_layout;
+ break;
+ case 128:
+ nand->ecc.layout = &fsmc_ecc1_128_layout;
+ break;
+ default:
+ printk(KERN_WARNING "No oob scheme defined for "
+ "oobsize %d\n", mtd->oobsize);
+ BUG();
+ }
}
/* Second stage of scan to fill MTD data-structures */
@@ -713,13 +1158,9 @@
* Check for partition info passed
*/
host->mtd.name = "nand";
- ret = mtd_device_parse_register(&host->mtd, NULL, 0,
- host->mtd.size <= 0x04000000 ?
- partition_info_16KB_blk :
- partition_info_128KB_blk,
- host->mtd.size <= 0x04000000 ?
- ARRAY_SIZE(partition_info_16KB_blk) :
- ARRAY_SIZE(partition_info_128KB_blk));
+ ppdata.of_node = np;
+ ret = mtd_device_parse_register(&host->mtd, NULL, &ppdata,
+ host->partitions, host->nr_partitions);
if (ret)
goto err_probe;
@@ -728,32 +1169,16 @@
return 0;
err_probe:
+err_scan_ident:
+ if (host->mode == USE_DMA_ACCESS)
+ dma_release_channel(host->write_dma_chan);
+err_req_write_chnl:
+ if (host->mode == USE_DMA_ACCESS)
+ dma_release_channel(host->read_dma_chan);
+err_req_read_chnl:
clk_disable(host->clk);
-err_probe1:
- if (host->clk)
- clk_put(host->clk);
- if (host->regs_va)
- iounmap(host->regs_va);
- if (host->resregs)
- release_mem_region(host->resregs->start,
- resource_size(host->resregs));
- if (host->cmd_va)
- iounmap(host->cmd_va);
- if (host->rescmd)
- release_mem_region(host->rescmd->start,
- resource_size(host->rescmd));
- if (host->addr_va)
- iounmap(host->addr_va);
- if (host->resaddr)
- release_mem_region(host->resaddr->start,
- resource_size(host->resaddr));
- if (host->data_va)
- iounmap(host->data_va);
- if (host->resdata)
- release_mem_region(host->resdata->start,
- resource_size(host->resdata));
-
- kfree(host);
+err_clk_enable:
+ clk_put(host->clk);
return ret;
}
@@ -768,24 +1193,15 @@
if (host) {
nand_release(&host->mtd);
+
+ if (host->mode == USE_DMA_ACCESS) {
+ dma_release_channel(host->write_dma_chan);
+ dma_release_channel(host->read_dma_chan);
+ }
clk_disable(host->clk);
clk_put(host->clk);
-
- iounmap(host->regs_va);
- release_mem_region(host->resregs->start,
- resource_size(host->resregs));
- iounmap(host->cmd_va);
- release_mem_region(host->rescmd->start,
- resource_size(host->rescmd));
- iounmap(host->addr_va);
- release_mem_region(host->resaddr->start,
- resource_size(host->resaddr));
- iounmap(host->data_va);
- release_mem_region(host->resdata->start,
- resource_size(host->resdata));
-
- kfree(host);
}
+
return 0;
}
@@ -801,15 +1217,24 @@
static int fsmc_nand_resume(struct device *dev)
{
struct fsmc_nand_data *host = dev_get_drvdata(dev);
- if (host)
+ if (host) {
clk_enable(host->clk);
+ fsmc_nand_setup(host->regs_va, host->bank,
+ host->nand.options & NAND_BUSWIDTH_16,
+ host->dev_timings);
+ }
return 0;
}
-static const struct dev_pm_ops fsmc_nand_pm_ops = {
- .suspend = fsmc_nand_suspend,
- .resume = fsmc_nand_resume,
+static SIMPLE_DEV_PM_OPS(fsmc_nand_pm_ops, fsmc_nand_suspend, fsmc_nand_resume);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id fsmc_nand_id_table[] = {
+ { .compatible = "st,spear600-fsmc-nand" },
+ {}
};
+MODULE_DEVICE_TABLE(of, fsmc_nand_id_table);
#endif
static struct platform_driver fsmc_nand_driver = {
@@ -817,6 +1242,7 @@
.driver = {
.owner = THIS_MODULE,
.name = "fsmc-nand",
+ .of_match_table = of_match_ptr(fsmc_nand_id_table),
#ifdef CONFIG_PM
.pm = &fsmc_nand_pm_ops,
#endif
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
index 590dd5c..e8ea710 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -848,7 +848,10 @@
sg_init_one(sgl, this->cmd_buffer, this->command_length);
dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE);
- desc = dmaengine_prep_slave_sg(channel, sgl, 1, DMA_MEM_TO_DEV, 1);
+ desc = dmaengine_prep_slave_sg(channel,
+ sgl, 1, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+
if (!desc) {
pr_err("step 2 error\n");
return -1;
@@ -889,7 +892,8 @@
/* [2] send DMA request */
prepare_data_dma(this, DMA_TO_DEVICE);
desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
- 1, DMA_MEM_TO_DEV, 1);
+ 1, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc) {
pr_err("step 2 error\n");
return -1;
@@ -925,7 +929,8 @@
/* [2] : send DMA request */
prepare_data_dma(this, DMA_FROM_DEVICE);
desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
- 1, DMA_DEV_TO_MEM, 1);
+ 1, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc) {
pr_err("step 2 error\n");
return -1;
@@ -970,8 +975,10 @@
pio[4] = payload;
pio[5] = auxiliary;
- desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio,
- ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
+ desc = dmaengine_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_TRANS_NONE,
+ DMA_CTRL_ACK);
if (!desc) {
pr_err("step 2 error\n");
return -1;
@@ -1035,7 +1042,8 @@
pio[5] = auxiliary;
desc = dmaengine_prep_slave_sg(channel,
(struct scatterlist *)pio,
- ARRAY_SIZE(pio), DMA_TRANS_NONE, 1);
+ ARRAY_SIZE(pio), DMA_TRANS_NONE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc) {
pr_err("step 2 error\n");
return -1;
@@ -1052,9 +1060,11 @@
| BF_GPMI_CTRL0_ADDRESS(address)
| BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
pio[1] = 0;
+ pio[2] = 0; /* clear GPMI_HW_GPMI_ECCCTRL, disable the BCH. */
desc = dmaengine_prep_slave_sg(channel,
- (struct scatterlist *)pio, 2,
- DMA_TRANS_NONE, 1);
+ (struct scatterlist *)pio, 3,
+ DMA_TRANS_NONE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc) {
pr_err("step 3 error\n");
return -1;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 493ec2f..75b1dde 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -1124,7 +1124,7 @@
chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
/* Do we have a flash based bad block table ? */
- if (chip->options & NAND_BBT_USE_FLASH)
+ if (chip->bbt_options & NAND_BBT_USE_FLASH)
ret = nand_update_bbt(mtd, ofs);
else {
chipnr = (int)(ofs >> chip->chip_shift);
@@ -1155,7 +1155,7 @@
return ret;
}
-static int __devinit nand_boot_set_geometry(struct gpmi_nand_data *this)
+static int nand_boot_set_geometry(struct gpmi_nand_data *this)
{
struct boot_rom_geometry *geometry = &this->rom_geometry;
@@ -1182,7 +1182,7 @@
}
static const char *fingerprint = "STMP";
-static int __devinit mx23_check_transcription_stamp(struct gpmi_nand_data *this)
+static int mx23_check_transcription_stamp(struct gpmi_nand_data *this)
{
struct boot_rom_geometry *rom_geo = &this->rom_geometry;
struct device *dev = this->dev;
@@ -1239,7 +1239,7 @@
}
/* Writes a transcription stamp. */
-static int __devinit mx23_write_transcription_stamp(struct gpmi_nand_data *this)
+static int mx23_write_transcription_stamp(struct gpmi_nand_data *this)
{
struct device *dev = this->dev;
struct boot_rom_geometry *rom_geo = &this->rom_geometry;
@@ -1322,7 +1322,7 @@
return 0;
}
-static int __devinit mx23_boot_init(struct gpmi_nand_data *this)
+static int mx23_boot_init(struct gpmi_nand_data *this)
{
struct device *dev = this->dev;
struct nand_chip *chip = &this->nand;
@@ -1391,7 +1391,7 @@
return 0;
}
-static int __devinit nand_boot_init(struct gpmi_nand_data *this)
+static int nand_boot_init(struct gpmi_nand_data *this)
{
nand_boot_set_geometry(this);
@@ -1401,7 +1401,7 @@
return 0;
}
-static int __devinit gpmi_set_geometry(struct gpmi_nand_data *this)
+static int gpmi_set_geometry(struct gpmi_nand_data *this)
{
int ret;
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
index e023bcc..ec6180d 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -20,7 +20,7 @@
#include <linux/mtd/nand.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
-#include <mach/dma.h>
+#include <linux/fsl/mxs-dma.h>
struct resources {
void *gpmi_regs;
diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c
index 5dc6f0d..11e4878 100644
--- a/drivers/mtd/nand/h1910.c
+++ b/drivers/mtd/nand/h1910.c
@@ -135,8 +135,8 @@
}
/* Register the partitions */
- mtd_device_parse_register(h1910_nand_mtd, NULL, 0,
- partition_info, NUM_PARTITIONS);
+ mtd_device_parse_register(h1910_nand_mtd, NULL, NULL, partition_info,
+ NUM_PARTITIONS);
/* Return happy */
return 0;
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index ac3b9f2..e4147e8 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -332,6 +332,11 @@
chip->ecc.mode = NAND_ECC_HW_OOB_FIRST;
chip->ecc.size = 512;
chip->ecc.bytes = 9;
+ chip->ecc.strength = 2;
+ /*
+ * FIXME: ecc_strength value of 2 bits per 512 bytes of data is a
+ * conservative guess, given 9 ecc bytes and reed-solomon alg.
+ */
if (pdata)
chip->ecc.layout = pdata->ecc_layout;
@@ -367,9 +372,9 @@
goto err_gpio_free;
}
- ret = mtd_device_parse_register(mtd, NULL, 0,
- pdata ? pdata->partitions : NULL,
- pdata ? pdata->num_partitions : 0);
+ ret = mtd_device_parse_register(mtd, NULL, NULL,
+ pdata ? pdata->partitions : NULL,
+ pdata ? pdata->num_partitions : 0);
if (ret) {
dev_err(&pdev->dev, "Failed to add mtd device\n");
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 74a43b8..cc0678a 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -1225,9 +1225,16 @@
goto escan;
}
+ if (this->ecc.mode == NAND_ECC_HW) {
+ if (nfc_is_v1())
+ this->ecc.strength = 1;
+ else
+ this->ecc.strength = (host->eccsize == 4) ? 4 : 8;
+ }
+
/* Register the partitions */
- mtd_device_parse_register(mtd, part_probes, 0,
- pdata->parts, pdata->nr_parts);
+ mtd_device_parse_register(mtd, part_probes, NULL, pdata->parts,
+ pdata->nr_parts);
platform_set_drvdata(pdev, host);
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 8a393f9..47b19c0 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -123,12 +123,6 @@
ret = -EINVAL;
}
- /* Do not allow past end of device */
- if (ofs + len > mtd->size) {
- pr_debug("%s: past end of device\n", __func__);
- ret = -EINVAL;
- }
-
return ret;
}
@@ -338,7 +332,7 @@
*/
static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
{
- int page, chipnr, res = 0;
+ int page, chipnr, res = 0, i = 0;
struct nand_chip *chip = mtd->priv;
u16 bad;
@@ -356,23 +350,29 @@
chip->select_chip(mtd, chipnr);
}
- if (chip->options & NAND_BUSWIDTH_16) {
- chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos & 0xFE,
- page);
- bad = cpu_to_le16(chip->read_word(mtd));
- if (chip->badblockpos & 0x1)
- bad >>= 8;
- else
- bad &= 0xFF;
- } else {
- chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos, page);
- bad = chip->read_byte(mtd);
- }
+ do {
+ if (chip->options & NAND_BUSWIDTH_16) {
+ chip->cmdfunc(mtd, NAND_CMD_READOOB,
+ chip->badblockpos & 0xFE, page);
+ bad = cpu_to_le16(chip->read_word(mtd));
+ if (chip->badblockpos & 0x1)
+ bad >>= 8;
+ else
+ bad &= 0xFF;
+ } else {
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos,
+ page);
+ bad = chip->read_byte(mtd);
+ }
- if (likely(chip->badblockbits == 8))
- res = bad != 0xFF;
- else
- res = hweight8(bad) < chip->badblockbits;
+ if (likely(chip->badblockbits == 8))
+ res = bad != 0xFF;
+ else
+ res = hweight8(bad) < chip->badblockbits;
+ ofs += mtd->writesize;
+ page = (int)(ofs >> chip->page_shift) & chip->pagemask;
+ i++;
+ } while (!res && i < 2 && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE));
if (getchip)
nand_release_device(mtd);
@@ -386,51 +386,79 @@
* @ofs: offset from device start
*
* This is the default implementation, which can be overridden by a hardware
- * specific driver.
+ * specific driver. We try operations in the following order, according to our
+ * bbt_options (NAND_BBT_NO_OOB_BBM and NAND_BBT_USE_FLASH):
+ * (1) erase the affected block, to allow OOB marker to be written cleanly
+ * (2) update in-memory BBT
+ * (3) write bad block marker to OOB area of affected block
+ * (4) update flash-based BBT
+ * Note that we retain the first error encountered in (3) or (4), finish the
+ * procedures, and dump the error in the end.
*/
static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
struct nand_chip *chip = mtd->priv;
uint8_t buf[2] = { 0, 0 };
- int block, ret, i = 0;
+ int block, res, ret = 0, i = 0;
+ int write_oob = !(chip->bbt_options & NAND_BBT_NO_OOB_BBM);
- if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
- ofs += mtd->erasesize - mtd->writesize;
+ if (write_oob) {
+ struct erase_info einfo;
+
+ /* Attempt erase before marking OOB */
+ memset(&einfo, 0, sizeof(einfo));
+ einfo.mtd = mtd;
+ einfo.addr = ofs;
+ einfo.len = 1 << chip->phys_erase_shift;
+ nand_erase_nand(mtd, &einfo, 0);
+ }
/* Get block number */
block = (int)(ofs >> chip->bbt_erase_shift);
+ /* Mark block bad in memory-based BBT */
if (chip->bbt)
chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
- /* Do we have a flash based bad block table? */
- if (chip->bbt_options & NAND_BBT_USE_FLASH)
- ret = nand_update_bbt(mtd, ofs);
- else {
+ /* Write bad block marker to OOB */
+ if (write_oob) {
struct mtd_oob_ops ops;
+ loff_t wr_ofs = ofs;
nand_get_device(chip, mtd, FL_WRITING);
- /*
- * Write to first two pages if necessary. If we write to more
- * than one location, the first error encountered quits the
- * procedure. We write two bytes per location, so we dont have
- * to mess with 16 bit access.
- */
- ops.len = ops.ooblen = 2;
ops.datbuf = NULL;
ops.oobbuf = buf;
- ops.ooboffs = chip->badblockpos & ~0x01;
+ ops.ooboffs = chip->badblockpos;
+ if (chip->options & NAND_BUSWIDTH_16) {
+ ops.ooboffs &= ~0x01;
+ ops.len = ops.ooblen = 2;
+ } else {
+ ops.len = ops.ooblen = 1;
+ }
ops.mode = MTD_OPS_PLACE_OOB;
+
+ /* Write to first/last page(s) if necessary */
+ if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
+ wr_ofs += mtd->erasesize - mtd->writesize;
do {
- ret = nand_do_write_oob(mtd, ofs, &ops);
+ res = nand_do_write_oob(mtd, wr_ofs, &ops);
+ if (!ret)
+ ret = res;
i++;
- ofs += mtd->writesize;
- } while (!ret && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE) &&
- i < 2);
+ wr_ofs += mtd->writesize;
+ } while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2);
nand_release_device(mtd);
}
+
+ /* Update flash-based bad block table */
+ if (chip->bbt_options & NAND_BBT_USE_FLASH) {
+ res = nand_update_bbt(mtd, ofs);
+ if (!ret)
+ ret = res;
+ }
+
if (!ret)
mtd->ecc_stats.badblocks++;
@@ -1586,25 +1614,14 @@
struct mtd_oob_ops ops;
int ret;
- /* Do not allow reads past end of device */
- if ((from + len) > mtd->size)
- return -EINVAL;
- if (!len)
- return 0;
-
nand_get_device(chip, mtd, FL_READING);
-
ops.len = len;
ops.datbuf = buf;
ops.oobbuf = NULL;
ops.mode = 0;
-
ret = nand_do_read_ops(mtd, from, &ops);
-
*retlen = ops.retlen;
-
nand_release_device(mtd);
-
return ret;
}
@@ -2293,12 +2310,6 @@
struct mtd_oob_ops ops;
int ret;
- /* Do not allow reads past end of device */
- if ((to + len) > mtd->size)
- return -EINVAL;
- if (!len)
- return 0;
-
/* Wait for the device to get ready */
panic_nand_wait(mtd, chip, 400);
@@ -2333,25 +2344,14 @@
struct mtd_oob_ops ops;
int ret;
- /* Do not allow reads past end of device */
- if ((to + len) > mtd->size)
- return -EINVAL;
- if (!len)
- return 0;
-
nand_get_device(chip, mtd, FL_WRITING);
-
ops.len = len;
ops.datbuf = (uint8_t *)buf;
ops.oobbuf = NULL;
ops.mode = 0;
-
ret = nand_do_write_ops(mtd, to, &ops);
-
*retlen = ops.retlen;
-
nand_release_device(mtd);
-
return ret;
}
@@ -2550,8 +2550,6 @@
if (check_offs_len(mtd, instr->addr, instr->len))
return -EINVAL;
- instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
-
/* Grab the lock and see if the device is available */
nand_get_device(chip, mtd, FL_ERASING);
@@ -2715,10 +2713,6 @@
*/
static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
{
- /* Check for invalid offset */
- if (offs > mtd->size)
- return -EINVAL;
-
return nand_block_checkbad(mtd, offs, 1, 0);
}
@@ -2857,7 +2851,6 @@
chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
return 0;
- pr_info("ONFI flash detected\n");
chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
for (i = 0; i < 3; i++) {
chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
@@ -2898,7 +2891,8 @@
mtd->writesize = le32_to_cpu(p->byte_per_page);
mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize;
mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
- chip->chipsize = (uint64_t)le32_to_cpu(p->blocks_per_lun) * mtd->erasesize;
+ chip->chipsize = le32_to_cpu(p->blocks_per_lun);
+ chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
*busw = 0;
if (le16_to_cpu(p->features) & 1)
*busw = NAND_BUSWIDTH_16;
@@ -2907,6 +2901,7 @@
chip->options |= (NAND_NO_READRDY |
NAND_NO_AUTOINCR) & NAND_CHIPOPTIONS_MSK;
+ pr_info("ONFI flash detected\n");
return 1;
}
@@ -3238,6 +3233,10 @@
int i;
struct nand_chip *chip = mtd->priv;
+ /* New bad blocks should be marked in OOB, flash-based BBT, or both */
+ BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
+ !(chip->bbt_options & NAND_BBT_USE_FLASH));
+
if (!(chip->options & NAND_OWN_BUFFERS))
chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL);
if (!chip->buffers)
@@ -3350,6 +3349,7 @@
if (!chip->ecc.size)
chip->ecc.size = 256;
chip->ecc.bytes = 3;
+ chip->ecc.strength = 1;
break;
case NAND_ECC_SOFT_BCH:
@@ -3384,6 +3384,8 @@
pr_warn("BCH ECC initialization failed!\n");
BUG();
}
+ chip->ecc.strength =
+ chip->ecc.bytes*8 / fls(8*chip->ecc.size);
break;
case NAND_ECC_NONE:
@@ -3397,6 +3399,7 @@
chip->ecc.write_oob = nand_write_oob_std;
chip->ecc.size = mtd->writesize;
chip->ecc.bytes = 0;
+ chip->ecc.strength = 0;
break;
default:
@@ -3461,25 +3464,26 @@
mtd->type = MTD_NANDFLASH;
mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM :
MTD_CAP_NANDFLASH;
- mtd->erase = nand_erase;
- mtd->point = NULL;
- mtd->unpoint = NULL;
- mtd->read = nand_read;
- mtd->write = nand_write;
- mtd->panic_write = panic_nand_write;
- mtd->read_oob = nand_read_oob;
- mtd->write_oob = nand_write_oob;
- mtd->sync = nand_sync;
- mtd->lock = NULL;
- mtd->unlock = NULL;
- mtd->suspend = nand_suspend;
- mtd->resume = nand_resume;
- mtd->block_isbad = nand_block_isbad;
- mtd->block_markbad = nand_block_markbad;
+ mtd->_erase = nand_erase;
+ mtd->_point = NULL;
+ mtd->_unpoint = NULL;
+ mtd->_read = nand_read;
+ mtd->_write = nand_write;
+ mtd->_panic_write = panic_nand_write;
+ mtd->_read_oob = nand_read_oob;
+ mtd->_write_oob = nand_write_oob;
+ mtd->_sync = nand_sync;
+ mtd->_lock = NULL;
+ mtd->_unlock = NULL;
+ mtd->_suspend = nand_suspend;
+ mtd->_resume = nand_resume;
+ mtd->_block_isbad = nand_block_isbad;
+ mtd->_block_markbad = nand_block_markbad;
mtd->writebufsize = mtd->writesize;
- /* propagate ecc.layout to mtd_info */
+ /* propagate ecc info to mtd_info */
mtd->ecclayout = chip->ecc.layout;
+ mtd->ecc_strength = chip->ecc.strength * chip->ecc.steps;
/* Check, if we should skip the bad block table scan */
if (chip->options & NAND_SKIP_BBTSCAN)
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
index ec68854..2b6f632 100644
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -179,6 +179,7 @@
chip->ecc.mode = NAND_ECC_HW;
chip->ecc.size = 256;
chip->ecc.bytes = 3;
+ chip->ecc.strength = 1;
chip->priv = ndfc;
ndfc->mtd.priv = chip;
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index b3a883e..c2b0bba 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -1058,6 +1058,7 @@
(pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW_ROMCODE)) {
info->nand.ecc.bytes = 3;
info->nand.ecc.size = 512;
+ info->nand.ecc.strength = 1;
info->nand.ecc.calculate = omap_calculate_ecc;
info->nand.ecc.hwctl = omap_enable_hwecc;
info->nand.ecc.correct = omap_correct_data;
@@ -1101,8 +1102,8 @@
goto out_release_mem_region;
}
- mtd_device_parse_register(&info->mtd, NULL, 0,
- pdata->parts, pdata->nr_parts);
+ mtd_device_parse_register(&info->mtd, NULL, NULL, pdata->parts,
+ pdata->nr_parts);
platform_set_drvdata(pdev, &info->mtd);
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
index 29f505a..1d3bfb2 100644
--- a/drivers/mtd/nand/orion_nand.c
+++ b/drivers/mtd/nand/orion_nand.c
@@ -129,8 +129,8 @@
}
mtd->name = "orion_nand";
- ret = mtd_device_parse_register(mtd, NULL, 0,
- board->parts, board->nr_parts);
+ ret = mtd_device_parse_register(mtd, NULL, NULL, board->parts,
+ board->nr_parts);
if (ret) {
nand_release(mtd);
goto no_dev;
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index 7f2da69..6404e6e 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -99,8 +99,9 @@
}
err = mtd_device_parse_register(&data->mtd,
- pdata->chip.part_probe_types, 0,
- pdata->chip.partitions, pdata->chip.nr_partitions);
+ pdata->chip.part_probe_types, NULL,
+ pdata->chip.partitions,
+ pdata->chip.nr_partitions);
if (!err)
return err;
diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c
index 7e52af5..0ddd90e 100644
--- a/drivers/mtd/nand/ppchameleonevb.c
+++ b/drivers/mtd/nand/ppchameleonevb.c
@@ -275,11 +275,10 @@
ppchameleon_mtd->name = "ppchameleon-nand";
/* Register the partitions */
- mtd_device_parse_register(ppchameleon_mtd, NULL, 0,
- ppchameleon_mtd->size == NAND_SMALL_SIZE ?
- partition_info_me :
- partition_info_hi,
- NUM_PARTITIONS);
+ mtd_device_parse_register(ppchameleon_mtd, NULL, NULL,
+ ppchameleon_mtd->size == NAND_SMALL_SIZE ?
+ partition_info_me : partition_info_hi,
+ NUM_PARTITIONS);
nand_evb_init:
/****************************
@@ -365,11 +364,10 @@
ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME;
/* Register the partitions */
- mtd_device_parse_register(ppchameleonevb_mtd, NULL, 0,
- ppchameleon_mtd->size == NAND_SMALL_SIZE ?
- partition_info_me :
- partition_info_hi,
- NUM_PARTITIONS);
+ mtd_device_parse_register(ppchameleonevb_mtd, NULL, NULL,
+ ppchameleon_mtd->size == NAND_SMALL_SIZE ?
+ partition_info_me : partition_info_hi,
+ NUM_PARTITIONS);
/* Return happy */
return 0;
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 5c3d719..def50ca 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1002,6 +1002,7 @@
KEEP_CONFIG:
chip->ecc.mode = NAND_ECC_HW;
chip->ecc.size = host->page_size;
+ chip->ecc.strength = 1;
chip->options = NAND_NO_AUTOINCR;
chip->options |= NAND_NO_READRDY;
@@ -1228,8 +1229,9 @@
continue;
}
- ret = mtd_device_parse_register(info->host[cs]->mtd, NULL, 0,
- pdata->parts[cs], pdata->nr_parts[cs]);
+ ret = mtd_device_parse_register(info->host[cs]->mtd, NULL,
+ NULL, pdata->parts[cs],
+ pdata->nr_parts[cs]);
if (!ret)
probe_success = 1;
}
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index 769a4e0..c204018 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -891,6 +891,7 @@
chip->ecc.mode = NAND_ECC_HW_SYNDROME;
chip->ecc.size = R852_DMA_LEN;
chip->ecc.bytes = SM_OOB_SIZE;
+ chip->ecc.strength = 2;
chip->ecc.hwctl = r852_ecc_hwctl;
chip->ecc.calculate = r852_ecc_calculate;
chip->ecc.correct = r852_ecc_correct;
diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c
index f309add..e55b5cf 100644
--- a/drivers/mtd/nand/rtc_from4.c
+++ b/drivers/mtd/nand/rtc_from4.c
@@ -527,6 +527,7 @@
this->ecc.mode = NAND_ECC_HW_SYNDROME;
this->ecc.size = 512;
this->ecc.bytes = 8;
+ this->ecc.strength = 3;
/* return the status of extra status and ECC checks */
this->errstat = rtc_from4_errstat;
/* set the nand_oobinfo to support FPGA H/W error detection */
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 868685d..91121f3 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -751,8 +751,8 @@
if (set)
mtd->mtd.name = set->name;
- return mtd_device_parse_register(&mtd->mtd, NULL, 0,
- set->partitions, set->nr_partitions);
+ return mtd_device_parse_register(&mtd->mtd, NULL, NULL,
+ set->partitions, set->nr_partitions);
}
/**
@@ -823,6 +823,7 @@
chip->ecc.calculate = s3c2410_nand_calculate_ecc;
chip->ecc.correct = s3c2410_nand_correct_data;
chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.strength = 1;
switch (info->cpu_type) {
case TYPE_S3C2410:
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 93b1f74..e9b2b26 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -26,6 +26,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
@@ -283,7 +284,7 @@
static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_val)
{
struct sh_flctl *flctl = mtd_to_flctl(mtd);
- uint32_t flcmncr_val = readl(FLCMNCR(flctl)) & ~SEL_16BIT;
+ uint32_t flcmncr_val = flctl->flcmncr_base & ~SEL_16BIT;
uint32_t flcmdcr_val, addr_len_bytes = 0;
/* Set SNAND bit if page size is 2048byte */
@@ -303,6 +304,7 @@
break;
case NAND_CMD_READ0:
case NAND_CMD_READOOB:
+ case NAND_CMD_RNDOUT:
addr_len_bytes = flctl->rw_ADRCNT;
flcmdcr_val |= CDSRC_E;
if (flctl->chip.options & NAND_BUSWIDTH_16)
@@ -320,6 +322,7 @@
break;
case NAND_CMD_READID:
flcmncr_val &= ~SNAND_E;
+ flcmdcr_val |= CDSRC_E;
addr_len_bytes = ADRCNT_1;
break;
case NAND_CMD_STATUS:
@@ -513,6 +516,8 @@
struct sh_flctl *flctl = mtd_to_flctl(mtd);
uint32_t read_cmd = 0;
+ pm_runtime_get_sync(&flctl->pdev->dev);
+
flctl->read_bytes = 0;
if (command != NAND_CMD_PAGEPROG)
flctl->index = 0;
@@ -525,7 +530,6 @@
execmd_read_page_sector(mtd, page_addr);
break;
}
- empty_fifo(flctl);
if (flctl->page_size)
set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8)
| command);
@@ -547,7 +551,6 @@
break;
}
- empty_fifo(flctl);
if (flctl->page_size) {
set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8)
| NAND_CMD_READ0);
@@ -559,15 +562,35 @@
flctl->read_bytes = mtd->oobsize;
goto read_normal_exit;
- case NAND_CMD_READID:
- empty_fifo(flctl);
- set_cmd_regs(mtd, command, command);
- set_addr(mtd, 0, 0);
+ case NAND_CMD_RNDOUT:
+ if (flctl->hwecc)
+ break;
- flctl->read_bytes = 4;
+ if (flctl->page_size)
+ set_cmd_regs(mtd, command, (NAND_CMD_RNDOUTSTART << 8)
+ | command);
+ else
+ set_cmd_regs(mtd, command, command);
+
+ set_addr(mtd, column, 0);
+
+ flctl->read_bytes = mtd->writesize + mtd->oobsize - column;
+ goto read_normal_exit;
+
+ case NAND_CMD_READID:
+ set_cmd_regs(mtd, command, command);
+
+ /* READID is always performed using an 8-bit bus */
+ if (flctl->chip.options & NAND_BUSWIDTH_16)
+ column <<= 1;
+ set_addr(mtd, column, 0);
+
+ flctl->read_bytes = 8;
writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
+ empty_fifo(flctl);
start_translation(flctl);
- read_datareg(flctl, 0); /* read and end */
+ read_fiforeg(flctl, flctl->read_bytes, 0);
+ wait_completion(flctl);
break;
case NAND_CMD_ERASE1:
@@ -650,29 +673,55 @@
default:
break;
}
- return;
+ goto runtime_exit;
read_normal_exit:
writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
+ empty_fifo(flctl);
start_translation(flctl);
read_fiforeg(flctl, flctl->read_bytes, 0);
wait_completion(flctl);
+runtime_exit:
+ pm_runtime_put_sync(&flctl->pdev->dev);
return;
}
static void flctl_select_chip(struct mtd_info *mtd, int chipnr)
{
struct sh_flctl *flctl = mtd_to_flctl(mtd);
- uint32_t flcmncr_val = readl(FLCMNCR(flctl));
+ int ret;
switch (chipnr) {
case -1:
- flcmncr_val &= ~CE0_ENABLE;
- writel(flcmncr_val, FLCMNCR(flctl));
+ flctl->flcmncr_base &= ~CE0_ENABLE;
+
+ pm_runtime_get_sync(&flctl->pdev->dev);
+ writel(flctl->flcmncr_base, FLCMNCR(flctl));
+
+ if (flctl->qos_request) {
+ dev_pm_qos_remove_request(&flctl->pm_qos);
+ flctl->qos_request = 0;
+ }
+
+ pm_runtime_put_sync(&flctl->pdev->dev);
break;
case 0:
- flcmncr_val |= CE0_ENABLE;
- writel(flcmncr_val, FLCMNCR(flctl));
+ flctl->flcmncr_base |= CE0_ENABLE;
+
+ if (!flctl->qos_request) {
+ ret = dev_pm_qos_add_request(&flctl->pdev->dev,
+ &flctl->pm_qos, 100);
+ if (ret < 0)
+ dev_err(&flctl->pdev->dev,
+ "PM QoS request failed: %d\n", ret);
+ flctl->qos_request = 1;
+ }
+
+ if (flctl->holden) {
+ pm_runtime_get_sync(&flctl->pdev->dev);
+ writel(HOLDEN, FLHOLDCR(flctl));
+ pm_runtime_put_sync(&flctl->pdev->dev);
+ }
break;
default:
BUG();
@@ -730,11 +779,6 @@
return 0;
}
-static void flctl_register_init(struct sh_flctl *flctl, unsigned long val)
-{
- writel(val, FLCMNCR(flctl));
-}
-
static int flctl_chip_init_tail(struct mtd_info *mtd)
{
struct sh_flctl *flctl = mtd_to_flctl(mtd);
@@ -781,13 +825,13 @@
chip->ecc.size = 512;
chip->ecc.bytes = 10;
+ chip->ecc.strength = 4;
chip->ecc.read_page = flctl_read_page_hwecc;
chip->ecc.write_page = flctl_write_page_hwecc;
chip->ecc.mode = NAND_ECC_HW;
/* 4 symbols ECC enabled */
- writel(readl(FLCMNCR(flctl)) | _4ECCEN | ECCPOS2 | ECCPOS_02,
- FLCMNCR(flctl));
+ flctl->flcmncr_base |= _4ECCEN | ECCPOS2 | ECCPOS_02;
} else {
chip->ecc.mode = NAND_ECC_SOFT;
}
@@ -819,13 +863,13 @@
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "failed to get I/O memory\n");
- goto err;
+ goto err_iomap;
}
flctl->reg = ioremap(res->start, resource_size(res));
if (flctl->reg == NULL) {
dev_err(&pdev->dev, "failed to remap I/O memory\n");
- goto err;
+ goto err_iomap;
}
platform_set_drvdata(pdev, flctl);
@@ -833,9 +877,9 @@
nand = &flctl->chip;
flctl_mtd->priv = nand;
flctl->pdev = pdev;
+ flctl->flcmncr_base = pdata->flcmncr_val;
flctl->hwecc = pdata->has_hwecc;
-
- flctl_register_init(flctl, pdata->flcmncr_val);
+ flctl->holden = pdata->use_holden;
nand->options = NAND_NO_AUTOINCR;
@@ -855,23 +899,28 @@
nand->read_word = flctl_read_word;
}
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_resume(&pdev->dev);
+
ret = nand_scan_ident(flctl_mtd, 1, NULL);
if (ret)
- goto err;
+ goto err_chip;
ret = flctl_chip_init_tail(flctl_mtd);
if (ret)
- goto err;
+ goto err_chip;
ret = nand_scan_tail(flctl_mtd);
if (ret)
- goto err;
+ goto err_chip;
mtd_device_register(flctl_mtd, pdata->parts, pdata->nr_parts);
return 0;
-err:
+err_chip:
+ pm_runtime_disable(&pdev->dev);
+err_iomap:
kfree(flctl);
return ret;
}
@@ -881,6 +930,7 @@
struct sh_flctl *flctl = platform_get_drvdata(pdev);
nand_release(&flctl->mtd);
+ pm_runtime_disable(&pdev->dev);
kfree(flctl);
return 0;
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
index b175c0f..3421e37 100644
--- a/drivers/mtd/nand/sharpsl.c
+++ b/drivers/mtd/nand/sharpsl.c
@@ -167,6 +167,7 @@
this->ecc.mode = NAND_ECC_HW;
this->ecc.size = 256;
this->ecc.bytes = 3;
+ this->ecc.strength = 1;
this->badblock_pattern = data->badblock_pattern;
this->ecc.layout = data->ecc_layout;
this->ecc.hwctl = sharpsl_nand_enable_hwecc;
@@ -181,8 +182,8 @@
/* Register the partitions */
sharpsl->mtd.name = "sharpsl-nand";
- err = mtd_device_parse_register(&sharpsl->mtd, NULL, 0,
- data->partitions, data->nr_partitions);
+ err = mtd_device_parse_register(&sharpsl->mtd, NULL, NULL,
+ data->partitions, data->nr_partitions);
if (err)
goto err_add;
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
index 6caa0cd..5aa5180 100644
--- a/drivers/mtd/nand/tmio_nand.c
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -430,6 +430,7 @@
nand_chip->ecc.mode = NAND_ECC_HW;
nand_chip->ecc.size = 512;
nand_chip->ecc.bytes = 6;
+ nand_chip->ecc.strength = 2;
nand_chip->ecc.hwctl = tmio_nand_enable_hwecc;
nand_chip->ecc.calculate = tmio_nand_calculate_ecc;
nand_chip->ecc.correct = tmio_nand_correct_data;
@@ -456,9 +457,9 @@
goto err_scan;
}
/* Register the partitions */
- retval = mtd_device_parse_register(mtd, NULL, 0,
- data ? data->partition : NULL,
- data ? data->num_partitions : 0);
+ retval = mtd_device_parse_register(mtd, NULL, NULL,
+ data ? data->partition : NULL,
+ data ? data->num_partitions : 0);
if (!retval)
return retval;
diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c
index c7c4f1d..26398dc 100644
--- a/drivers/mtd/nand/txx9ndfmc.c
+++ b/drivers/mtd/nand/txx9ndfmc.c
@@ -356,6 +356,7 @@
/* txx9ndfmc_nand_scan will overwrite ecc.size and ecc.bytes */
chip->ecc.size = 256;
chip->ecc.bytes = 3;
+ chip->ecc.strength = 1;
chip->chip_delay = 100;
chip->controller = &drvdata->hw_control;
@@ -386,7 +387,7 @@
}
mtd->name = txx9_priv->mtdname;
- mtd_device_parse_register(mtd, NULL, 0, NULL, 0);
+ mtd_device_parse_register(mtd, NULL, NULL, NULL, 0);
drvdata->mtds[i] = mtd;
}