| /* | 
 |  * Backlight driver for Analog Devices ADP5520/ADP5501 MFD PMICs | 
 |  * | 
 |  * Copyright 2009 Analog Devices Inc. | 
 |  * | 
 |  * Licensed under the GPL-2 or later. | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/init.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/fb.h> | 
 | #include <linux/backlight.h> | 
 | #include <linux/mfd/adp5520.h> | 
 |  | 
 | struct adp5520_bl { | 
 | 	struct device *master; | 
 | 	struct adp5520_backlight_platfrom_data *pdata; | 
 | 	struct mutex lock; | 
 | 	unsigned long cached_daylight_max; | 
 | 	int id; | 
 | 	int current_brightness; | 
 | }; | 
 |  | 
 | static int adp5520_bl_set(struct backlight_device *bl, int brightness) | 
 | { | 
 | 	struct adp5520_bl *data = bl_get_data(bl); | 
 | 	struct device *master = data->master; | 
 | 	int ret = 0; | 
 |  | 
 | 	if (data->pdata->en_ambl_sens) { | 
 | 		if ((brightness > 0) && (brightness < ADP5020_MAX_BRIGHTNESS)) { | 
 | 			/* Disable Ambient Light auto adjust */ | 
 | 			ret |= adp5520_clr_bits(master, BL_CONTROL, | 
 | 					BL_AUTO_ADJ); | 
 | 			ret |= adp5520_write(master, DAYLIGHT_MAX, brightness); | 
 | 		} else { | 
 | 			/* | 
 | 			 * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust | 
 | 			 * restore daylight l3 sysfs brightness | 
 | 			 */ | 
 | 			ret |= adp5520_write(master, DAYLIGHT_MAX, | 
 | 					 data->cached_daylight_max); | 
 | 			ret |= adp5520_set_bits(master, BL_CONTROL, | 
 | 					 BL_AUTO_ADJ); | 
 | 		} | 
 | 	} else { | 
 | 		ret |= adp5520_write(master, DAYLIGHT_MAX, brightness); | 
 | 	} | 
 |  | 
 | 	if (data->current_brightness && brightness == 0) | 
 | 		ret |= adp5520_set_bits(master, | 
 | 				MODE_STATUS, DIM_EN); | 
 | 	else if (data->current_brightness == 0 && brightness) | 
 | 		ret |= adp5520_clr_bits(master, | 
 | 				MODE_STATUS, DIM_EN); | 
 |  | 
 | 	if (!ret) | 
 | 		data->current_brightness = brightness; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int adp5520_bl_update_status(struct backlight_device *bl) | 
 | { | 
 | 	int brightness = bl->props.brightness; | 
 | 	if (bl->props.power != FB_BLANK_UNBLANK) | 
 | 		brightness = 0; | 
 |  | 
 | 	if (bl->props.fb_blank != FB_BLANK_UNBLANK) | 
 | 		brightness = 0; | 
 |  | 
 | 	return adp5520_bl_set(bl, brightness); | 
 | } | 
 |  | 
 | static int adp5520_bl_get_brightness(struct backlight_device *bl) | 
 | { | 
 | 	struct adp5520_bl *data = bl_get_data(bl); | 
 | 	int error; | 
 | 	uint8_t reg_val; | 
 |  | 
 | 	error = adp5520_read(data->master, BL_VALUE, ®_val); | 
 |  | 
 | 	return error ? data->current_brightness : reg_val; | 
 | } | 
 |  | 
 | static struct backlight_ops adp5520_bl_ops = { | 
 | 	.update_status	= adp5520_bl_update_status, | 
 | 	.get_brightness	= adp5520_bl_get_brightness, | 
 | }; | 
 |  | 
 | static int adp5520_bl_setup(struct backlight_device *bl) | 
 | { | 
 | 	struct adp5520_bl *data = bl_get_data(bl); | 
 | 	struct device *master = data->master; | 
 | 	struct adp5520_backlight_platfrom_data *pdata = data->pdata; | 
 | 	int ret = 0; | 
 |  | 
 | 	ret |= adp5520_write(master, DAYLIGHT_MAX, pdata->l1_daylight_max); | 
 | 	ret |= adp5520_write(master, DAYLIGHT_DIM, pdata->l1_daylight_dim); | 
 |  | 
 | 	if (pdata->en_ambl_sens) { | 
 | 		data->cached_daylight_max = pdata->l1_daylight_max; | 
 | 		ret |= adp5520_write(master, OFFICE_MAX, pdata->l2_office_max); | 
 | 		ret |= adp5520_write(master, OFFICE_DIM, pdata->l2_office_dim); | 
 | 		ret |= adp5520_write(master, DARK_MAX, pdata->l3_dark_max); | 
 | 		ret |= adp5520_write(master, DARK_DIM, pdata->l3_dark_dim); | 
 | 		ret |= adp5520_write(master, L2_TRIP, pdata->l2_trip); | 
 | 		ret |= adp5520_write(master, L2_HYS, pdata->l2_hyst); | 
 | 		ret |= adp5520_write(master, L3_TRIP, pdata->l3_trip); | 
 | 		ret |= adp5520_write(master, L3_HYS, pdata->l3_hyst); | 
 | 		ret |= adp5520_write(master, ALS_CMPR_CFG, | 
 | 			ALS_CMPR_CFG_VAL(pdata->abml_filt, L3_EN)); | 
 | 	} | 
 |  | 
 | 	ret |= adp5520_write(master, BL_CONTROL, | 
 | 			BL_CTRL_VAL(pdata->fade_led_law, pdata->en_ambl_sens)); | 
 |  | 
 | 	ret |= adp5520_write(master, BL_FADE, FADE_VAL(pdata->fade_in, | 
 | 			pdata->fade_out)); | 
 |  | 
 | 	ret |= adp5520_set_bits(master, MODE_STATUS, BL_EN | DIM_EN); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static ssize_t adp5520_show(struct device *dev, char *buf, int reg) | 
 | { | 
 | 	struct adp5520_bl *data = dev_get_drvdata(dev); | 
 | 	int error; | 
 | 	uint8_t reg_val; | 
 |  | 
 | 	mutex_lock(&data->lock); | 
 | 	error = adp5520_read(data->master, reg, ®_val); | 
 | 	mutex_unlock(&data->lock); | 
 |  | 
 | 	return sprintf(buf, "%u\n", reg_val); | 
 | } | 
 |  | 
 | static ssize_t adp5520_store(struct device *dev, const char *buf, | 
 | 			 size_t count, int reg) | 
 | { | 
 | 	struct adp5520_bl *data = dev_get_drvdata(dev); | 
 | 	unsigned long val; | 
 | 	int ret; | 
 |  | 
 | 	ret = strict_strtoul(buf, 10, &val); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	mutex_lock(&data->lock); | 
 | 	adp5520_write(data->master, reg, val); | 
 | 	mutex_unlock(&data->lock); | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t adp5520_bl_dark_max_show(struct device *dev, | 
 | 		struct device_attribute *attr, char *buf) | 
 | { | 
 | 	return adp5520_show(dev, buf, DARK_MAX); | 
 | } | 
 |  | 
 | static ssize_t adp5520_bl_dark_max_store(struct device *dev, | 
 | 		struct device_attribute *attr, const char *buf, size_t count) | 
 | { | 
 | 	return adp5520_store(dev, buf, count, DARK_MAX); | 
 | } | 
 | static DEVICE_ATTR(dark_max, 0664, adp5520_bl_dark_max_show, | 
 | 			adp5520_bl_dark_max_store); | 
 |  | 
 | static ssize_t adp5520_bl_office_max_show(struct device *dev, | 
 | 				     struct device_attribute *attr, char *buf) | 
 | { | 
 | 	return adp5520_show(dev, buf, OFFICE_MAX); | 
 | } | 
 |  | 
 | static ssize_t adp5520_bl_office_max_store(struct device *dev, | 
 | 		struct device_attribute *attr, const char *buf, size_t count) | 
 | { | 
 | 	return adp5520_store(dev, buf, count, OFFICE_MAX); | 
 | } | 
 | static DEVICE_ATTR(office_max, 0664, adp5520_bl_office_max_show, | 
 | 			adp5520_bl_office_max_store); | 
 |  | 
 | static ssize_t adp5520_bl_daylight_max_show(struct device *dev, | 
 | 			struct device_attribute *attr, char *buf) | 
 | { | 
 | 	return adp5520_show(dev, buf, DAYLIGHT_MAX); | 
 | } | 
 |  | 
 | static ssize_t adp5520_bl_daylight_max_store(struct device *dev, | 
 | 		struct device_attribute *attr, const char *buf, size_t count) | 
 | { | 
 | 	struct adp5520_bl *data = dev_get_drvdata(dev); | 
 |  | 
 | 	strict_strtoul(buf, 10, &data->cached_daylight_max); | 
 | 	return adp5520_store(dev, buf, count, DAYLIGHT_MAX); | 
 | } | 
 | static DEVICE_ATTR(daylight_max, 0664, adp5520_bl_daylight_max_show, | 
 | 			adp5520_bl_daylight_max_store); | 
 |  | 
 | static ssize_t adp5520_bl_dark_dim_show(struct device *dev, | 
 | 			struct device_attribute *attr, char *buf) | 
 | { | 
 | 	return adp5520_show(dev, buf, DARK_DIM); | 
 | } | 
 |  | 
 | static ssize_t adp5520_bl_dark_dim_store(struct device *dev, | 
 | 				     struct device_attribute *attr, | 
 | 				     const char *buf, size_t count) | 
 | { | 
 | 	return adp5520_store(dev, buf, count, DARK_DIM); | 
 | } | 
 | static DEVICE_ATTR(dark_dim, 0664, adp5520_bl_dark_dim_show, | 
 | 			adp5520_bl_dark_dim_store); | 
 |  | 
 | static ssize_t adp5520_bl_office_dim_show(struct device *dev, | 
 | 			struct device_attribute *attr, char *buf) | 
 | { | 
 | 	return adp5520_show(dev, buf, OFFICE_DIM); | 
 | } | 
 |  | 
 | static ssize_t adp5520_bl_office_dim_store(struct device *dev, | 
 | 				     struct device_attribute *attr, | 
 | 				     const char *buf, size_t count) | 
 | { | 
 | 	return adp5520_store(dev, buf, count, OFFICE_DIM); | 
 | } | 
 | static DEVICE_ATTR(office_dim, 0664, adp5520_bl_office_dim_show, | 
 | 			adp5520_bl_office_dim_store); | 
 |  | 
 | static ssize_t adp5520_bl_daylight_dim_show(struct device *dev, | 
 | 				     struct device_attribute *attr, char *buf) | 
 | { | 
 | 	return adp5520_show(dev, buf, DAYLIGHT_DIM); | 
 | } | 
 |  | 
 | static ssize_t adp5520_bl_daylight_dim_store(struct device *dev, | 
 | 				     struct device_attribute *attr, | 
 | 				     const char *buf, size_t count) | 
 | { | 
 | 	return adp5520_store(dev, buf, count, DAYLIGHT_DIM); | 
 | } | 
 | static DEVICE_ATTR(daylight_dim, 0664, adp5520_bl_daylight_dim_show, | 
 | 			adp5520_bl_daylight_dim_store); | 
 |  | 
 | static struct attribute *adp5520_bl_attributes[] = { | 
 | 	&dev_attr_dark_max.attr, | 
 | 	&dev_attr_dark_dim.attr, | 
 | 	&dev_attr_office_max.attr, | 
 | 	&dev_attr_office_dim.attr, | 
 | 	&dev_attr_daylight_max.attr, | 
 | 	&dev_attr_daylight_dim.attr, | 
 | 	NULL | 
 | }; | 
 |  | 
 | static const struct attribute_group adp5520_bl_attr_group = { | 
 | 	.attrs = adp5520_bl_attributes, | 
 | }; | 
 |  | 
 | static int __devinit adp5520_bl_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct backlight_device *bl; | 
 | 	struct adp5520_bl *data; | 
 | 	int ret = 0; | 
 |  | 
 | 	data = kzalloc(sizeof(*data), GFP_KERNEL); | 
 | 	if (data == NULL) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	data->master = pdev->dev.parent; | 
 | 	data->pdata = pdev->dev.platform_data; | 
 |  | 
 | 	if (data->pdata  == NULL) { | 
 | 		dev_err(&pdev->dev, "missing platform data\n"); | 
 | 		kfree(data); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	data->id = pdev->id; | 
 | 	data->current_brightness = 0; | 
 |  | 
 | 	mutex_init(&data->lock); | 
 |  | 
 | 	bl = backlight_device_register(pdev->name, data->master, | 
 | 			data, &adp5520_bl_ops); | 
 | 	if (IS_ERR(bl)) { | 
 | 		dev_err(&pdev->dev, "failed to register backlight\n"); | 
 | 		kfree(data); | 
 | 		return PTR_ERR(bl); | 
 | 	} | 
 |  | 
 | 	bl->props.max_brightness = | 
 | 		bl->props.brightness = ADP5020_MAX_BRIGHTNESS; | 
 |  | 
 | 	if (data->pdata->en_ambl_sens) | 
 | 		ret = sysfs_create_group(&bl->dev.kobj, | 
 | 			&adp5520_bl_attr_group); | 
 |  | 
 | 	if (ret) { | 
 | 		dev_err(&pdev->dev, "failed to register sysfs\n"); | 
 | 		backlight_device_unregister(bl); | 
 | 		kfree(data); | 
 | 	} | 
 |  | 
 | 	platform_set_drvdata(pdev, bl); | 
 | 	ret |= adp5520_bl_setup(bl); | 
 | 	backlight_update_status(bl); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int __devexit adp5520_bl_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct backlight_device *bl = platform_get_drvdata(pdev); | 
 | 	struct adp5520_bl *data = bl_get_data(bl); | 
 |  | 
 | 	adp5520_clr_bits(data->master, MODE_STATUS, BL_EN); | 
 |  | 
 | 	if (data->pdata->en_ambl_sens) | 
 | 		sysfs_remove_group(&bl->dev.kobj, | 
 | 				&adp5520_bl_attr_group); | 
 |  | 
 | 	backlight_device_unregister(bl); | 
 | 	kfree(data); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 | static int adp5520_bl_suspend(struct platform_device *pdev, | 
 | 				 pm_message_t state) | 
 | { | 
 | 	struct backlight_device *bl = platform_get_drvdata(pdev); | 
 | 	return adp5520_bl_set(bl, 0); | 
 | } | 
 |  | 
 | static int adp5520_bl_resume(struct platform_device *pdev) | 
 | { | 
 | 	struct backlight_device *bl = platform_get_drvdata(pdev); | 
 |  | 
 | 	backlight_update_status(bl); | 
 | 	return 0; | 
 | } | 
 | #else | 
 | #define adp5520_bl_suspend	NULL | 
 | #define adp5520_bl_resume	NULL | 
 | #endif | 
 |  | 
 | static struct platform_driver adp5520_bl_driver = { | 
 | 	.driver		= { | 
 | 		.name	= "adp5520-backlight", | 
 | 		.owner	= THIS_MODULE, | 
 | 	}, | 
 | 	.probe		= adp5520_bl_probe, | 
 | 	.remove		= __devexit_p(adp5520_bl_remove), | 
 | 	.suspend	= adp5520_bl_suspend, | 
 | 	.resume		= adp5520_bl_resume, | 
 | }; | 
 |  | 
 | static int __init adp5520_bl_init(void) | 
 | { | 
 | 	return platform_driver_register(&adp5520_bl_driver); | 
 | } | 
 | module_init(adp5520_bl_init); | 
 |  | 
 | static void __exit adp5520_bl_exit(void) | 
 | { | 
 | 	platform_driver_unregister(&adp5520_bl_driver); | 
 | } | 
 | module_exit(adp5520_bl_exit); | 
 |  | 
 | MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); | 
 | MODULE_DESCRIPTION("ADP5520(01) Backlight Driver"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_ALIAS("platform:adp5520-backlight"); |