ARM: OMAP2: Misc updates from linux-omap tree
Misc updates from linux-omap tree, mostly to update common
device initialization and add missing defines from linux-omap
tree. Also some changes to make room for adding 34xx in
following patches.
Note that the I2C resources are now set up in
arch/arm/plat-omap/i2c.c helper, and can be removed
from devices.c.
Signed-off-by: Tony Lindgren <tony@atomide.com>
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 187e3d8..1c1d831 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -20,16 +20,16 @@
#include <asm/mach/map.h>
#include <mach/tc.h>
+#include <mach/control.h>
#include <mach/board.h>
#include <mach/mux.h>
#include <mach/gpio.h>
#include <mach/menelaus.h>
#include <mach/mcbsp.h>
+#include <mach/dsp_common.h>
#if defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
-#include "../plat-omap/dsp/dsp_common.h"
-
static struct dsp_platform_data dsp_pdata = {
.kdev_list = LIST_HEAD_INIT(dsp_pdata.kdev_list),
};
@@ -75,7 +75,7 @@
{
static DEFINE_MUTEX(dsp_pdata_lock);
- mutex_init(&kdev->lock);
+ spin_lock_init(&kdev->lock);
mutex_lock(&dsp_pdata_lock);
list_add_tail(&kdev->entry, &dsp_pdata.kdev_list);
@@ -479,10 +479,6 @@
*/
static int __init omap_init_devices(void)
{
-/*
- * Need to enable relevant once for 2430 SDP
- */
-#ifndef CONFIG_MACH_OMAP_2430SDP
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
@@ -492,7 +488,6 @@
omap_init_uwire();
omap_init_wdt();
omap_init_rng();
-#endif
return 0;
}
arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h
index cf1dc02..10d449e 100644
--- a/arch/arm/plat-omap/include/mach/board-2430sdp.h
+++ b/arch/arm/plat-omap/include/mach/board-2430sdp.h
@@ -30,10 +30,12 @@
#define __ASM_ARCH_OMAP_2430SDP_H
/* Placeholder for 2430SDP specific defines */
-#define OMAP24XX_ETHR_START 0x08000300
+#define OMAP24XX_ETHR_START 0x08000300
#define OMAP24XX_ETHR_GPIO_IRQ 149
#define SDP2430_CS0_BASE 0x04000000
-#define TWL4030_IRQNUM INT_24XX_SYS_NIRQ
+/* Function prototypes */
+extern void sdp2430_flash_init(void);
+extern void sdp2430_usb_init(void);
#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
index d6f2a8e..731c858 100644
--- a/arch/arm/plat-omap/include/mach/board-apollon.h
+++ b/arch/arm/plat-omap/include/mach/board-apollon.h
@@ -31,6 +31,12 @@
extern void apollon_mmc_init(void);
+static inline int apollon_plus(void)
+{
+ /* The apollon plus has IDCODE revision 5 */
+ return system_rev & 0xc0;
+}
+
/* Placeholder for APOLLON specific defines */
#define APOLLON_ETHR_GPIO_IRQ 74
diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h
index 1470cd3..7c3fa0f 100644
--- a/arch/arm/plat-omap/include/mach/board-h4.h
+++ b/arch/arm/plat-omap/include/mach/board-h4.h
@@ -1,7 +1,7 @@
/*
* arch/arm/plat-omap/include/mach/board-h4.h
*
- * Hardware definitions for TI OMAP1610 H4 board.
+ * Hardware definitions for TI OMAP2420 H4 board.
*
* Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
*
@@ -29,6 +29,9 @@
#ifndef __ASM_ARCH_OMAP_H4_H
#define __ASM_ARCH_OMAP_H4_H
+/* MMC Prototypes */
+extern void h4_mmc_init(void);
+
/* Placeholder for H4 specific defines */
#define OMAP24XX_ETHR_GPIO_IRQ 92
#endif /* __ASM_ARCH_OMAP_H4_H */
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
index 5444564..c23c12c 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -45,6 +45,8 @@
unsigned cover:1;
/* 4 wire signaling is optional, and is only used for SD/SDIO */
unsigned wire4:1;
+ /* use the internal clock */
+ unsigned internal_clock:1;
s16 power_pin;
s16 switch_pin;
s16 wp_pin;
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
index ee378d2..dc988676 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -1,13 +1,10 @@
-#ifndef __ASM_ARCH_CONTROL_H
-#define __ASM_ARCH_CONTROL_H
-
/*
* arch/arm/plat-omap/include/mach/control.h
*
* OMAP2/3 System Control Module definitions
*
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
*
* Written by Paul Walmsley
*
@@ -16,14 +13,23 @@
* the Free Software Foundation.
*/
+#ifndef __ASM_ARCH_CONTROL_H
+#define __ASM_ARCH_CONTROL_H
+
#include <mach/io.h>
+#ifndef __ASSEMBLY__
#define OMAP242X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
#define OMAP243X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
#define OMAP343X_CTRL_REGADDR(reg) \
IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#else
+#define OMAP242X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg) IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#endif /* __ASSEMBLY__ */
/*
* As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
@@ -134,6 +140,7 @@
#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc)
#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4)
/*
* REVISIT: This list of registers is not comprehensive - there are more
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
index 4cb818d..5bb7460 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -76,6 +76,8 @@
extern void omap_set_gpio_direction(int gpio, int is_input);
extern void omap_set_gpio_dataout(int gpio, int enable);
extern int omap_get_gpio_datain(int gpio);
+extern void omap2_gpio_prepare_for_retention(void);
+extern void omap2_gpio_resume_after_retention(void);
extern void omap_set_gpio_debounce(int gpio, int enable);
extern void omap_set_gpio_debounce_time(int gpio, int enable);
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
index 4258e00..3c7b425 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -25,6 +25,9 @@
#define GPMC_CS_NAND_ADDRESS 0x20
#define GPMC_CS_NAND_DATA 0x24
+#define GPMC_CONFIG 0x50
+#define GPMC_STATUS 0x54
+
#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29)
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index abb01e4..29c849f 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -282,8 +282,8 @@
#include "omap730.h"
#include "omap1510.h"
-#include "omap24xx.h"
#include "omap16xx.h"
+#include "omap24xx.h"
#include "omap34xx.h"
#ifndef __ASSEMBLER__
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
index 17248bb..e9fd630 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -125,6 +125,7 @@
#define INT_UART2 (15 + IH2_BASE)
#define INT_BT_MCSI1TX (16 + IH2_BASE)
#define INT_BT_MCSI1RX (17 + IH2_BASE)
+#define INT_SOSSI_MATCH (19 + IH2_BASE)
#define INT_USB_W2FC (20 + IH2_BASE)
#define INT_1WIRE (21 + IH2_BASE)
#define INT_OS_TIMER (22 + IH2_BASE)
@@ -176,6 +177,7 @@
#define INT_1610_DMA_CH14 (61 + IH2_BASE)
#define INT_1610_DMA_CH15 (62 + IH2_BASE)
#define INT_1610_NAND (63 + IH2_BASE)
+#define INT_1610_SHA1MD5 (91 + IH2_BASE)
/*
* OMAP-730 specific IRQ numbers for interrupt handler 2
@@ -263,12 +265,16 @@
#define INT_24XX_GPTIMER10 46
#define INT_24XX_GPTIMER11 47
#define INT_24XX_GPTIMER12 48
+#define INT_24XX_SHA1MD5 51
#define INT_24XX_I2C1_IRQ 56
#define INT_24XX_I2C2_IRQ 57
+#define INT_24XX_HDQ_IRQ 58
#define INT_24XX_MCBSP1_IRQ_TX 59
#define INT_24XX_MCBSP1_IRQ_RX 60
#define INT_24XX_MCBSP2_IRQ_TX 62
#define INT_24XX_MCBSP2_IRQ_RX 63
+#define INT_24XX_SPI1_IRQ 65
+#define INT_24XX_SPI2_IRQ 66
#define INT_24XX_UART1_IRQ 72
#define INT_24XX_UART2_IRQ 73
#define INT_24XX_UART3_IRQ 74
diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h
index 505a38a..d240046 100644
--- a/arch/arm/plat-omap/include/mach/omap1510.h
+++ b/arch/arm/plat-omap/include/mach/omap1510.h
@@ -44,5 +44,7 @@
#define OMAP1510_DSPREG_SIZE SZ_128K
#define OMAP1510_DSPREG_START 0xE1000000
+#define OMAP1510_DSP_MMU_BASE (0xfffed200)
+
#endif /* __ASM_ARCH_OMAP15XX_H */
diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h
index c6c93af..0e69b50 100644
--- a/arch/arm/plat-omap/include/mach/omap16xx.h
+++ b/arch/arm/plat-omap/include/mach/omap16xx.h
@@ -44,6 +44,11 @@
#define OMAP16XX_DSPREG_SIZE SZ_128K
#define OMAP16XX_DSPREG_START 0xE1000000
+#define OMAP16XX_SEC_BASE 0xFFFE4000
+#define OMAP16XX_SEC_DES (OMAP16XX_SEC_BASE + 0x0000)
+#define OMAP16XX_SEC_SHA1MD5 (OMAP16XX_SEC_BASE + 0x0800)
+#define OMAP16XX_SEC_RNG (OMAP16XX_SEC_BASE + 0x1000)
+
/*
* ---------------------------------------------------------------------------
* Interrupts
@@ -190,7 +195,7 @@
#define WSPR_DISABLE_0 (0x0000aaaa)
#define WSPR_DISABLE_1 (0x00005555)
-/* Mailbox */
+#define OMAP16XX_DSP_MMU_BASE (0xfffed200)
#define OMAP16XX_MAILBOX_BASE (0xfffcf000)
#endif /* __ASM_ARCH_OMAP16XX_H */
diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
index cae037d..ec67fb4 100644
--- a/arch/arm/plat-omap/include/mach/omapfb.h
+++ b/arch/arm/plat-omap/include/mach/omapfb.h
@@ -62,6 +62,7 @@
#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000
#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000
#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000
+#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000
#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000
/* Values from DSP must map to lower 16-bits */
@@ -305,6 +306,7 @@
int screen_width,
int pos_x, int pos_y, int width,
int height, int color_mode);
+ int (*set_rotate) (int angle);
int (*setup_mem) (int plane, size_t size,
int mem_type, unsigned long *paddr);
int (*mmap) (struct fb_info *info,
@@ -374,6 +376,7 @@
extern struct lcd_ctrl omap2_disp_ctrl;
#endif
+extern void omapfb_reserve_sdram(void);
extern void omapfb_register_panel(struct lcd_panel *panel);
extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
extern void omapfb_notify_clients(struct omapfb_device *fbdev,
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
index d908eb5..25ee381 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -25,6 +25,8 @@
#define SDRC_DLLB_STATUS 0x06C
#define SDRC_POWER 0x070
#define SDRC_MR_0 0x084
+#define SDRC_ACTIM_CTRL_A 0x09c
+#define SDRC_ACTIM_CTRL_B 0x0a0
#define SDRC_RFR_CTRL_0 0x0a4
/*