System-specific handling of bus errors for DECstation variations
supporting parity errors only for memory (Pmax/3min/Maxine).
Fixes for resources decoded by the KN04/KN05 MB ASIC. Additional
clean-ups for the ECC handler.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/include/asm-mips/dec/ecc.h b/include/asm-mips/dec/ecc.h
index 724908b..19495a4 100644
--- a/include/asm-mips/dec/ecc.h
+++ b/include/asm-mips/dec/ecc.h
@@ -49,7 +49,8 @@
extern void dec_ecc_be_init(void);
extern int dec_ecc_be_handler(struct pt_regs *regs, int is_fixup);
-extern irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+extern irqreturn_t dec_ecc_be_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs);
#endif
#endif /* __ASM_MIPS_DEC_ECC_H */
diff --git a/include/asm-mips/dec/kn01.h b/include/asm-mips/dec/kn01.h
index 325fcbb..607a385 100644
--- a/include/asm-mips/dec/kn01.h
+++ b/include/asm-mips/dec/kn01.h
@@ -8,7 +8,7 @@
*
* Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
* are by courtesy of Chris Fraser.
- * Copyright (C) 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki
*/
#ifndef __ASM_MIPS_DEC_KN01_H
#define __ASM_MIPS_DEC_KN01_H
@@ -80,4 +80,22 @@
#define KN01_CSR_VRGTRB (1<<0) /* red DAC voltage over blue (r/o) */
#define KN01_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+struct pt_regs;
+
+extern u16 cached_kn01_csr;
+extern spinlock_t kn01_lock;
+
+extern void dec_kn01_be_init(void);
+extern int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup);
+extern irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs);
+#endif
+
#endif /* __ASM_MIPS_DEC_KN01_H */
diff --git a/include/asm-mips/dec/kn02.h b/include/asm-mips/dec/kn02.h
index 2c935f9..83a042e 100644
--- a/include/asm-mips/dec/kn02.h
+++ b/include/asm-mips/dec/kn02.h
@@ -8,16 +8,11 @@
*
* Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
* are by courtesy of Chris Fraser.
- * Copyright (C) 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki
*/
#ifndef __ASM_MIPS_DEC_KN02_H
#define __ASM_MIPS_DEC_KN02_H
-#ifndef __ASSEMBLY__
-#include <linux/spinlock.h>
-#include <linux/types.h>
-#endif
-
#include <asm/addrspace.h>
#include <asm/dec/ecc.h>
@@ -53,8 +48,8 @@
#define KN02_CSR_PSU (1<<27) /* power supply unit warning */
#define KN02_CSR_NVRAM (1<<26) /* ~NVRAM clear jumper */
#define KN02_CSR_REFEVEN (1<<25) /* mem refresh bank toggle */
-#define KN03_CSR_NRMOD (1<<24) /* ~NRMOD manufact. jumper */
-#define KN03_CSR_IOINTEN (0xff<<16) /* IRQ mask bits */
+#define KN02_CSR_NRMOD (1<<24) /* ~NRMOD manufact. jumper */
+#define KN02_CSR_IOINTEN (0xff<<16) /* IRQ mask bits */
#define KN02_CSR_DIAGCHK (1<<15) /* diagn/norml ECC reads */
#define KN02_CSR_DIAGGEN (1<<14) /* diagn/norml ECC writes */
#define KN02_CSR_CORRECT (1<<13) /* ECC correct/check */
@@ -63,8 +58,8 @@
#define KN02_CSR_BNK32M (1<<10) /* 32M/8M stride */
#define KN02_CSR_DIAGDN (1<<9) /* DIAGDN manufact. jumper */
#define KN02_CSR_BAUD38 (1<<8) /* DZ11 38/19kbps ext. rate */
-#define KN03_CSR_IOINT (0xff<<0) /* IRQ status bits (r/o) */
-#define KN03_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */
+#define KN02_CSR_IOINT (0xff<<0) /* IRQ status bits (r/o) */
+#define KN02_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */
/*
@@ -98,6 +93,10 @@
#ifndef __ASSEMBLY__
+
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
extern u32 cached_kn02_csr;
extern spinlock_t kn02_lock;
extern void init_kn02_irqs(int base);
diff --git a/include/asm-mips/dec/kn02xa.h b/include/asm-mips/dec/kn02xa.h
index f6bdf73..3c25a33 100644
--- a/include/asm-mips/dec/kn02xa.h
+++ b/include/asm-mips/dec/kn02xa.h
@@ -9,7 +9,7 @@
*
* Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
* are by courtesy of Chris Fraser.
- * Copyright (C) 2000, 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2000, 2002, 2003, 2005 Maciej W. Rozycki
*
* These are addresses which have to be known early in the boot process.
* For other addresses refer to tc.h, ioasic_addrs.h and friends.
@@ -52,8 +52,13 @@
#define KN02XA_MER_PAGERR (1<<16) /* 2k page boundary error */
#define KN02XA_MER_TRANSERR (1<<15) /* transfer length error */
#define KN02XA_MER_PARDIS (1<<14) /* parity error disable */
-#define KN02XA_MER_RES_12 (0x3<<12) /* unused */
-#define KN02XA_MER_BYTERR (0xf<<8) /* byte lane error bitmask */
+#define KN02XA_MER_SIZE (1<<13) /* r/o mirror of MSR_SIZE */
+#define KN02XA_MER_RES_12 (1<<12) /* unused */
+#define KN02XA_MER_BYTERR (0xf<<8) /* byte lane error bitmask: */
+#define KN02XA_MER_BYTERR_3 (0x8<<8) /* byte lane #3 */
+#define KN02XA_MER_BYTERR_2 (0x4<<8) /* byte lane #2 */
+#define KN02XA_MER_BYTERR_1 (0x2<<8) /* byte lane #1 */
+#define KN02XA_MER_BYTERR_0 (0x1<<8) /* byte lane #0 */
#define KN02XA_MER_RES_0 (0xff<<0) /* unused */
/*
@@ -72,4 +77,17 @@
#define KN02XA_EAR_ADDRESS (0x7ffffff<<2) /* address involved */
#define KN02XA_EAR_RES_0 (0x3<<0) /* unused */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/interrupt.h>
+
+struct pt_regs;
+
+extern void dec_kn02xa_be_init(void);
+extern int dec_kn02xa_be_handler(struct pt_regs *regs, int is_fixup);
+extern irqreturn_t dec_kn02xa_be_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs);
+#endif
+
#endif /* __ASM_MIPS_DEC_KN02XA_H */
diff --git a/include/asm-mips/dec/kn05.h b/include/asm-mips/dec/kn05.h
index b120362..61feac3 100644
--- a/include/asm-mips/dec/kn05.h
+++ b/include/asm-mips/dec/kn05.h
@@ -1,10 +1,12 @@
/*
* include/asm-mips/dec/kn05.h
*
- * DECstation 5000/260 (4max+ or KN05) and DECsystem 5900/260
+ * DECstation/DECsystem 5000/260 (4max+ or KN05), 5000/150 (4min
+ * or KN04-BA), Personal DECstation/DECsystem 5000/50 (4maxine or
+ * KN04-CA) and DECsystem 5900/260 (KN05) R4k CPU card MB ASIC
* definitions.
*
- * Copyright (C) 2002, 2003 Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -13,59 +15,62 @@
*
* WARNING! All this information is pure guesswork based on the
* ROM. It is provided here in hope it will give someone some
- * food for thought. No documentation for the KN05 module has
- * been located so far.
+ * food for thought. No documentation for the KN05 nor the KN04
+ * module has been located so far.
*/
#ifndef __ASM_MIPS_DEC_KN05_H
#define __ASM_MIPS_DEC_KN05_H
+#include <asm/addrspace.h>
#include <asm/dec/ioasic_addrs.h>
/*
* The oncard MB (Memory Buffer) ASIC provides an additional address
* decoder. Certain address ranges within the "high" 16 slots are
- * passed to the I/O ASIC's decoder like with the KN03. Others are
- * handled locally. "Low" slots are always passed.
+ * passed to the I/O ASIC's decoder like with the KN03 or KN02-BA/CA.
+ * Others are handled locally. "Low" slots are always passed.
*/
-#define KN05_MB_ROM (16*IOASIC_SLOT_SIZE) /* KN05 card ROM */
-#define KN05_IOCTL (17*IOASIC_SLOT_SIZE) /* I/O ASIC */
-#define KN05_ESAR (18*IOASIC_SLOT_SIZE) /* LANCE MAC address chip */
-#define KN05_LANCE (19*IOASIC_SLOT_SIZE) /* LANCE Ethernet */
-#define KN05_MB_INT (20*IOASIC_SLOT_SIZE) /* MB interrupt register */
-#define KN05_MB_EA (21*IOASIC_SLOT_SIZE) /* MB error address? */
-#define KN05_MB_EC (22*IOASIC_SLOT_SIZE) /* MB error ??? */
-#define KN05_MB_CSR (23*IOASIC_SLOT_SIZE) /* MB control & status */
-#define KN05_RES_24 (24*IOASIC_SLOT_SIZE) /* unused? */
-#define KN05_RES_25 (25*IOASIC_SLOT_SIZE) /* unused? */
-#define KN05_RES_26 (26*IOASIC_SLOT_SIZE) /* unused? */
-#define KN05_RES_27 (27*IOASIC_SLOT_SIZE) /* unused? */
-#define KN05_SCSI (28*IOASIC_SLOT_SIZE) /* ASC SCSI */
-#define KN05_RES_29 (29*IOASIC_SLOT_SIZE) /* unused? */
-#define KN05_RES_30 (30*IOASIC_SLOT_SIZE) /* unused? */
-#define KN05_RES_31 (31*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_SLOT_BASE KSEG1ADDR(0x1fc00000)
+
+#define KN4K_MB_ROM (0*IOASIC_SLOT_SIZE) /* KN05/KN04 card ROM */
+#define KN4K_IOCTL (1*IOASIC_SLOT_SIZE) /* I/O ASIC */
+#define KN4K_ESAR (2*IOASIC_SLOT_SIZE) /* LANCE MAC address chip */
+#define KN4K_LANCE (3*IOASIC_SLOT_SIZE) /* LANCE Ethernet */
+#define KN4K_MB_INT (4*IOASIC_SLOT_SIZE) /* MB interrupt register */
+#define KN4K_MB_EA (5*IOASIC_SLOT_SIZE) /* MB error address? */
+#define KN4K_MB_EC (6*IOASIC_SLOT_SIZE) /* MB error ??? */
+#define KN4K_MB_CSR (7*IOASIC_SLOT_SIZE) /* MB control & status */
+#define KN4K_RES_08 (8*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_09 (9*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_10 (10*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_11 (11*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_SCSI (12*IOASIC_SLOT_SIZE) /* ASC SCSI */
+#define KN4K_RES_13 (13*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_14 (14*IOASIC_SLOT_SIZE) /* unused? */
+#define KN4K_RES_15 (15*IOASIC_SLOT_SIZE) /* unused? */
/*
* Bits for the MB interrupt register.
* The register appears read-only.
*/
-#define KN05_MB_INT_TC (1<<0) /* TURBOchannel? */
-#define KN05_MB_INT_RTC (1<<1) /* RTC? */
-#define KN05_MB_INT_MT (1<<3) /* ??? */
+#define KN4K_MB_INT_TC (1<<0) /* TURBOchannel? */
+#define KN4K_MB_INT_RTC (1<<1) /* RTC? */
+#define KN4K_MB_INT_MT (1<<3) /* ??? */
/*
* Bits for the MB control & status register.
* Set to 0x00bf8001 on my system by the ROM.
*/
-#define KN05_MB_CSR_PF (1<<0) /* PreFetching enable? */
-#define KN05_MB_CSR_F (1<<1) /* ??? */
-#define KN05_MB_CSR_ECC (0xff<<2) /* ??? */
-#define KN05_MB_CSR_OD (1<<10) /* ??? */
-#define KN05_MB_CSR_CP (1<<11) /* ??? */
-#define KN05_MB_CSR_UNC (1<<12) /* ??? */
-#define KN05_MB_CSR_IM (1<<13) /* ??? */
-#define KN05_MB_CSR_NC (1<<14) /* ??? */
-#define KN05_MB_CSR_EE (1<<15) /* (bus) Exception Enable? */
-#define KN05_MB_CSR_MSK (0x1f<<16) /* ??? */
-#define KN05_MB_CSR_FW (1<<21) /* ??? */
+#define KN4K_MB_CSR_PF (1<<0) /* PreFetching enable? */
+#define KN4K_MB_CSR_F (1<<1) /* ??? */
+#define KN4K_MB_CSR_ECC (0xff<<2) /* ??? */
+#define KN4K_MB_CSR_OD (1<<10) /* ??? */
+#define KN4K_MB_CSR_CP (1<<11) /* ??? */
+#define KN4K_MB_CSR_UNC (1<<12) /* ??? */
+#define KN4K_MB_CSR_IM (1<<13) /* ??? */
+#define KN4K_MB_CSR_NC (1<<14) /* ??? */
+#define KN4K_MB_CSR_EE (1<<15) /* (bus) Exception Enable? */
+#define KN4K_MB_CSR_MSK (0x1f<<16) /* ??? */
+#define KN4K_MB_CSR_FW (1<<21) /* ??? */
#endif /* __ASM_MIPS_DEC_KN05_H */