|  | /* | 
|  | * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III | 
|  | * flexcop-misc.c - miscellaneous functions | 
|  | * see flexcop.c for copyright information | 
|  | */ | 
|  | #include "flexcop.h" | 
|  |  | 
|  | void flexcop_determine_revision(struct flexcop_device *fc) | 
|  | { | 
|  | flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); | 
|  |  | 
|  | switch (v.misc_204.Rev_N_sig_revision_hi) { | 
|  | case 0x2: | 
|  | deb_info("found a FlexCopII.\n"); | 
|  | fc->rev = FLEXCOP_II; | 
|  | break; | 
|  | case 0x3: | 
|  | deb_info("found a FlexCopIIb.\n"); | 
|  | fc->rev = FLEXCOP_IIB; | 
|  | break; | 
|  | case 0x0: | 
|  | deb_info("found a FlexCopIII.\n"); | 
|  | fc->rev = FLEXCOP_III; | 
|  | break; | 
|  | default: | 
|  | err("unknown FlexCop Revision: %x. Please report this to " | 
|  | "linux-dvb@linuxtv.org.", | 
|  | v.misc_204.Rev_N_sig_revision_hi); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if ((fc->has_32_hw_pid_filter = v.misc_204.Rev_N_sig_caps)) | 
|  | deb_info("this FlexCop has " | 
|  | "the additional 32 hardware pid filter.\n"); | 
|  | else | 
|  | deb_info("this FlexCop has " | 
|  | "the 6 basic main hardware pid filter.\n"); | 
|  | /* bus parts have to decide if hw pid filtering is used or not. */ | 
|  | } | 
|  |  | 
|  | static const char *flexcop_revision_names[] = { | 
|  | "Unknown chip", | 
|  | "FlexCopII", | 
|  | "FlexCopIIb", | 
|  | "FlexCopIII", | 
|  | }; | 
|  |  | 
|  | static const char *flexcop_device_names[] = { | 
|  | [FC_UNK]	= "Unknown device", | 
|  | [FC_CABLE]	= "Cable2PC/CableStar 2 DVB-C", | 
|  | [FC_AIR_DVBT]	= "Air2PC/AirStar 2 DVB-T", | 
|  | [FC_AIR_ATSC1]	= "Air2PC/AirStar 2 ATSC 1st generation", | 
|  | [FC_AIR_ATSC2]	= "Air2PC/AirStar 2 ATSC 2nd generation", | 
|  | [FC_AIR_ATSC3]	= "Air2PC/AirStar 2 ATSC 3rd generation (HD5000)", | 
|  | [FC_SKY_REV23]	= "Sky2PC/SkyStar 2 DVB-S rev 2.3 (old version)", | 
|  | [FC_SKY_REV26]	= "Sky2PC/SkyStar 2 DVB-S rev 2.6", | 
|  | [FC_SKY_REV27]	= "Sky2PC/SkyStar 2 DVB-S rev 2.7a/u", | 
|  | [FC_SKY_REV28]	= "Sky2PC/SkyStar 2 DVB-S rev 2.8", | 
|  | }; | 
|  |  | 
|  | static const char *flexcop_bus_names[] = { | 
|  | "USB", | 
|  | "PCI", | 
|  | }; | 
|  |  | 
|  | void flexcop_device_name(struct flexcop_device *fc, | 
|  | const char *prefix, const char *suffix) | 
|  | { | 
|  | info("%s '%s' at the '%s' bus controlled by a '%s' %s", | 
|  | prefix,	flexcop_device_names[fc->dev_type], | 
|  | flexcop_bus_names[fc->bus_type], | 
|  | flexcop_revision_names[fc->rev], suffix); | 
|  | } | 
|  |  | 
|  | void flexcop_dump_reg(struct flexcop_device *fc, | 
|  | flexcop_ibi_register reg, int num) | 
|  | { | 
|  | flexcop_ibi_value v; | 
|  | int i; | 
|  | for (i = 0; i < num; i++) { | 
|  | v = fc->read_ibi_reg(fc, reg+4*i); | 
|  | deb_rdump("0x%03x: %08x, ", reg+4*i, v.raw); | 
|  | } | 
|  | deb_rdump("\n"); | 
|  | } | 
|  | EXPORT_SYMBOL(flexcop_dump_reg); |