PCI: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c
index eb5cac6..dfb5393 100644
--- a/drivers/pci/hotplug/shpchp_ctrl.c
+++ b/drivers/pci/hotplug/shpchp_ctrl.c
@@ -91,7 +91,7 @@
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
- dbg("%s: Card present %x Power status %x\n", __FUNCTION__,
+ dbg("%s: Card present %x Power status %x\n", __func__,
p_slot->presence_save, p_slot->pwr_save);
if (getstatus) {
@@ -191,10 +191,10 @@
{
int rc = 0;
- dbg("%s: change to speed %d\n", __FUNCTION__, speed);
+ dbg("%s: change to speed %d\n", __func__, speed);
if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) {
err("%s: Issue of set bus speed mode command failed\n",
- __FUNCTION__);
+ __func__);
return WRONG_BUS_FREQUENCY;
}
return rc;
@@ -213,7 +213,7 @@
if (flag) {
if (asp < bsp) {
err("%s: speed of bus %x and adapter %x mismatch\n",
- __FUNCTION__, bsp, asp);
+ __func__, bsp, asp);
rc = WRONG_BUS_FREQUENCY;
}
return rc;
@@ -247,13 +247,13 @@
hp_slot = p_slot->device - ctrl->slot_device_offset;
dbg("%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n",
- __FUNCTION__, p_slot->device,
+ __func__, p_slot->device,
ctrl->slot_device_offset, hp_slot);
/* Power on slot without connecting to bus */
rc = p_slot->hpc_ops->power_on_slot(p_slot);
if (rc) {
- err("%s: Failed to power on slot\n", __FUNCTION__);
+ err("%s: Failed to power on slot\n", __func__);
return -1;
}
@@ -262,13 +262,13 @@
return WRONG_BUS_FREQUENCY;
if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) {
- err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__);
+ err("%s: Issue of set bus speed mode command failed\n", __func__);
return WRONG_BUS_FREQUENCY;
}
/* turn on board, blink green LED, turn off Amber LED */
if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
- err("%s: Issue of Slot Enable command failed\n", __FUNCTION__);
+ err("%s: Issue of Slot Enable command failed\n", __func__);
return rc;
}
}
@@ -276,19 +276,19 @@
rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &asp);
if (rc) {
err("%s: Can't get adapter speed or bus mode mismatch\n",
- __FUNCTION__);
+ __func__);
return WRONG_BUS_FREQUENCY;
}
rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bsp);
if (rc) {
- err("%s: Can't get bus operation speed\n", __FUNCTION__);
+ err("%s: Can't get bus operation speed\n", __func__);
return WRONG_BUS_FREQUENCY;
}
rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &msp);
if (rc) {
- err("%s: Can't get max bus operation speed\n", __FUNCTION__);
+ err("%s: Can't get max bus operation speed\n", __func__);
msp = bsp;
}
@@ -297,7 +297,7 @@
slots_not_empty = 1;
dbg("%s: slots_not_empty %d, adapter_speed %d, bus_speed %d, "
- "max_bus_speed %d\n", __FUNCTION__, slots_not_empty, asp,
+ "max_bus_speed %d\n", __func__, slots_not_empty, asp,
bsp, msp);
rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, asp, bsp, msp);
@@ -306,18 +306,18 @@
/* turn on board, blink green LED, turn off Amber LED */
if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
- err("%s: Issue of Slot Enable command failed\n", __FUNCTION__);
+ err("%s: Issue of Slot Enable command failed\n", __func__);
return rc;
}
/* Wait for ~1 second */
msleep(1000);
- dbg("%s: slot status = %x\n", __FUNCTION__, p_slot->status);
+ dbg("%s: slot status = %x\n", __func__, p_slot->status);
/* Check for a power fault */
if (p_slot->status == 0xFF) {
/* power fault occurred, but it was benign */
- dbg("%s: power fault\n", __FUNCTION__);
+ dbg("%s: power fault\n", __func__);
rc = POWER_FAILURE;
p_slot->status = 0;
goto err_exit;
@@ -341,7 +341,7 @@
/* turn off slot, turn on Amber LED, turn off Green LED */
rc = p_slot->hpc_ops->slot_disable(p_slot);
if (rc) {
- err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
+ err("%s: Issue of Slot Disable command failed\n", __func__);
return rc;
}
@@ -365,7 +365,7 @@
hp_slot = p_slot->device - ctrl->slot_device_offset;
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
- dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot);
+ dbg("In %s, hp_slot = %d\n", __func__, hp_slot);
/* Change status to shutdown */
if (p_slot->is_a_board)
@@ -374,13 +374,13 @@
/* turn off slot, turn on Amber LED, turn off Green LED */
rc = p_slot->hpc_ops->slot_disable(p_slot);
if (rc) {
- err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
+ err("%s: Issue of Slot Disable command failed\n", __func__);
return rc;
}
rc = p_slot->hpc_ops->set_attention_status(p_slot, 0);
if (rc) {
- err("%s: Issue of Set Attention command failed\n", __FUNCTION__);
+ err("%s: Issue of Set Attention command failed\n", __func__);
return rc;
}
@@ -439,7 +439,7 @@
info = kmalloc(sizeof(*info), GFP_KERNEL);
if (!info) {
- err("%s: Cannot allocate memory\n", __FUNCTION__);
+ err("%s: Cannot allocate memory\n", __func__);
return;
}
info->p_slot = p_slot;
@@ -513,7 +513,7 @@
* expires to cancel hot-add or hot-remove
*/
info("Button cancel on Slot(%s)\n", p_slot->name);
- dbg("%s: button cancel\n", __FUNCTION__);
+ dbg("%s: button cancel\n", __func__);
cancel_delayed_work(&p_slot->work);
if (p_slot->state == BLINKINGOFF_STATE)
p_slot->hpc_ops->green_led_on(p_slot);
@@ -551,7 +551,7 @@
handle_button_press_event(p_slot);
break;
case INT_POWER_FAULT:
- dbg("%s: power fault\n", __FUNCTION__);
+ dbg("%s: power fault\n", __func__);
p_slot->hpc_ops->set_attention_status(p_slot, 1);
p_slot->hpc_ops->green_led_off(p_slot);
break;
@@ -593,7 +593,7 @@
/* We have to save the presence info for these slots */
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
p_slot->hpc_ops->get_power_status(p_slot, &(p_slot->pwr_save));
- dbg("%s: p_slot->pwr_save %x\n", __FUNCTION__, p_slot->pwr_save);
+ dbg("%s: p_slot->pwr_save %x\n", __func__, p_slot->pwr_save);
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if(((p_slot->ctrl->pci_dev->vendor == PCI_VENDOR_ID_AMD) ||