wireless: remove remaining qual code
This removes the remaining users of the rx status
'qual' field and the field itself.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index e413bd3..234891d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -681,19 +681,13 @@
snr = rx_stats_sig_avg / rx_stats_noise_diff;
rx_status.noise = rx_status.signal -
iwl3945_calc_db_from_ratio(snr);
- rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal,
- rx_status.noise);
-
- /* If noise info not available, calculate signal quality indicator (%)
- * using just the dBm signal level. */
} else {
rx_status.noise = priv->last_rx_noise;
- rx_status.qual = iwl3945_calc_sig_qual(rx_status.signal, 0);
}
- IWL_DEBUG_STATS(priv, "Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n",
- rx_status.signal, rx_status.noise, rx_status.qual,
+ IWL_DEBUG_STATS(priv, "Rssi %d noise %d sig_avg %d noise_diff %d\n",
+ rx_status.signal, rx_status.noise,
rx_stats_sig_avg, rx_stats_noise_diff);
header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index ecc23ec..531fa12 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -222,7 +222,6 @@
*
*****************************************************************************/
extern int iwl3945_calc_db_from_ratio(int sig_ratio);
-extern int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm);
extern void iwl3945_rx_replenish(void *data);
extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index f5c87e7..6f36b6e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -650,47 +650,6 @@
}
EXPORT_SYMBOL(iwl_reply_statistics);
-#define PERFECT_RSSI (-20) /* dBm */
-#define WORST_RSSI (-95) /* dBm */
-#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
-
-/* Calculate an indication of rx signal quality (a percentage, not dBm!).
- * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
- * about formulas used below. */
-static int iwl_calc_sig_qual(int rssi_dbm, int noise_dbm)
-{
- int sig_qual;
- int degradation = PERFECT_RSSI - rssi_dbm;
-
- /* If we get a noise measurement, use signal-to-noise ratio (SNR)
- * as indicator; formula is (signal dbm - noise dbm).
- * SNR at or above 40 is a great signal (100%).
- * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
- * Weakest usable signal is usually 10 - 15 dB SNR. */
- if (noise_dbm) {
- if (rssi_dbm - noise_dbm >= 40)
- return 100;
- else if (rssi_dbm < noise_dbm)
- return 0;
- sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
-
- /* Else use just the signal level.
- * This formula is a least squares fit of data points collected and
- * compared with a reference system that had a percentage (%) display
- * for signal quality. */
- } else
- sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
- (15 * RSSI_RANGE + 62 * degradation)) /
- (RSSI_RANGE * RSSI_RANGE);
-
- if (sig_qual > 100)
- sig_qual = 100;
- else if (sig_qual < 1)
- sig_qual = 0;
-
- return sig_qual;
-}
-
/* Calc max signal level (dBm) among 3 possible receivers */
static inline int iwl_calc_rssi(struct iwl_priv *priv,
struct iwl_rx_phy_res *rx_resp)
@@ -1101,11 +1060,8 @@
if (iwl_is_associated(priv) &&
!test_bit(STATUS_SCANNING, &priv->status)) {
rx_status.noise = priv->last_rx_noise;
- rx_status.qual = iwl_calc_sig_qual(rx_status.signal,
- rx_status.noise);
} else {
rx_status.noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
- rx_status.qual = iwl_calc_sig_qual(rx_status.signal, 0);
}
/* Reset beacon noise level if not associated. */
@@ -1118,8 +1074,8 @@
iwl_dbg_report_frame(priv, phy_res, len, header, 1);
#endif
iwl_dbg_log_rx_data_frame(priv, len, header);
- IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, qual %d, TSF %llu\n",
- rx_status.signal, rx_status.noise, rx_status.qual,
+ IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, noise %d, TSF %llu\n",
+ rx_status.signal, rx_status.noise,
(unsigned long long)rx_status.mactime);
/*
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index e5d8fa3..f8e4e4b 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1299,47 +1299,6 @@
return (int)ratio2dB[sig_ratio];
}
-#define PERFECT_RSSI (-20) /* dBm */
-#define WORST_RSSI (-95) /* dBm */
-#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
-
-/* Calculate an indication of rx signal quality (a percentage, not dBm!).
- * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
- * about formulas used below. */
-int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm)
-{
- int sig_qual;
- int degradation = PERFECT_RSSI - rssi_dbm;
-
- /* If we get a noise measurement, use signal-to-noise ratio (SNR)
- * as indicator; formula is (signal dbm - noise dbm).
- * SNR at or above 40 is a great signal (100%).
- * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
- * Weakest usable signal is usually 10 - 15 dB SNR. */
- if (noise_dbm) {
- if (rssi_dbm - noise_dbm >= 40)
- return 100;
- else if (rssi_dbm < noise_dbm)
- return 0;
- sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
-
- /* Else use just the signal level.
- * This formula is a least squares fit of data points collected and
- * compared with a reference system that had a percentage (%) display
- * for signal quality. */
- } else
- sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
- (15 * RSSI_RANGE + 62 * degradation)) /
- (RSSI_RANGE * RSSI_RANGE);
-
- if (sig_qual > 100)
- sig_qual = 100;
- else if (sig_qual < 1)
- sig_qual = 0;
-
- return sig_qual;
-}
-
/**
* iwl3945_rx_handle - Main entry function for receiving responses from uCode
*