| /* | 
 |  *  pci_link.c - ACPI PCI Interrupt Link Device Driver ($Revision: 34 $) | 
 |  * | 
 |  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> | 
 |  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> | 
 |  *  Copyright (C) 2002       Dominik Brodowski <devel@brodo.de> | 
 |  * | 
 |  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | 
 |  * | 
 |  *  This program is free software; you can redistribute it and/or modify | 
 |  *  it under the terms of the GNU General Public License as published by | 
 |  *  the Free Software Foundation; either version 2 of the License, or (at | 
 |  *  your option) any later version. | 
 |  * | 
 |  *  This program is distributed in the hope that it will be useful, but | 
 |  *  WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
 |  *  General Public License for more details. | 
 |  * | 
 |  *  You should have received a copy of the GNU General Public License along | 
 |  *  with this program; if not, write to the Free Software Foundation, Inc., | 
 |  *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. | 
 |  * | 
 |  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | 
 |  * | 
 |  * TBD:  | 
 |  *      1. Support more than one IRQ resource entry per link device (index). | 
 |  *	2. Implement start/stop mechanism and use ACPI Bus Driver facilities | 
 |  *	   for IRQ management (e.g. start()->_SRS). | 
 |  */ | 
 |  | 
 | #include <linux/sysdev.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/types.h> | 
 | #include <linux/proc_fs.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/pm.h> | 
 | #include <linux/pci.h> | 
 |  | 
 | #include <acpi/acpi_bus.h> | 
 | #include <acpi/acpi_drivers.h> | 
 |  | 
 |  | 
 | #define _COMPONENT		ACPI_PCI_COMPONENT | 
 | ACPI_MODULE_NAME		("pci_link") | 
 |  | 
 | #define ACPI_PCI_LINK_CLASS		"pci_irq_routing" | 
 | #define ACPI_PCI_LINK_HID		"PNP0C0F" | 
 | #define ACPI_PCI_LINK_DRIVER_NAME	"ACPI PCI Interrupt Link Driver" | 
 | #define ACPI_PCI_LINK_DEVICE_NAME	"PCI Interrupt Link" | 
 | #define ACPI_PCI_LINK_FILE_INFO		"info" | 
 | #define ACPI_PCI_LINK_FILE_STATUS	"state" | 
 |  | 
 | #define ACPI_PCI_LINK_MAX_POSSIBLE 16 | 
 |  | 
 | static int acpi_pci_link_add (struct acpi_device *device); | 
 | static int acpi_pci_link_remove (struct acpi_device *device, int type); | 
 |  | 
 | static struct acpi_driver acpi_pci_link_driver = { | 
 | 	.name =		ACPI_PCI_LINK_DRIVER_NAME, | 
 | 	.class =	ACPI_PCI_LINK_CLASS, | 
 | 	.ids =		ACPI_PCI_LINK_HID, | 
 | 	.ops =		{ | 
 | 				.add =    acpi_pci_link_add, | 
 | 				.remove = acpi_pci_link_remove, | 
 | 			}, | 
 | }; | 
 |  | 
 | struct acpi_pci_link_irq { | 
 | 	u8			active;			/* Current IRQ */ | 
 | 	u8			edge_level;		/* All IRQs */ | 
 | 	u8			active_high_low;	/* All IRQs */ | 
 | 	u8			initialized; | 
 | 	u8			resource_type; | 
 | 	u8			possible_count; | 
 | 	u8			possible[ACPI_PCI_LINK_MAX_POSSIBLE]; | 
 | }; | 
 |  | 
 | struct acpi_pci_link { | 
 | 	struct list_head	node; | 
 | 	struct acpi_device	*device; | 
 | 	acpi_handle		handle; | 
 | 	struct acpi_pci_link_irq irq; | 
 | }; | 
 |  | 
 | static struct { | 
 | 	int			count; | 
 | 	struct list_head	entries; | 
 | }				acpi_link; | 
 |  | 
 |  | 
 | /* -------------------------------------------------------------------------- | 
 |                             PCI Link Device Management | 
 |    -------------------------------------------------------------------------- */ | 
 |  | 
 | /* | 
 |  * set context (link) possible list from resource list | 
 |  */ | 
 | static acpi_status | 
 | acpi_pci_link_check_possible ( | 
 | 	struct acpi_resource	*resource, | 
 | 	void			*context) | 
 | { | 
 | 	struct acpi_pci_link	*link = (struct acpi_pci_link *) context; | 
 | 	u32			i = 0; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE("acpi_pci_link_check_possible"); | 
 |  | 
 | 	switch (resource->id) { | 
 | 	case ACPI_RSTYPE_START_DPF: | 
 | 		return_ACPI_STATUS(AE_OK); | 
 | 	case ACPI_RSTYPE_IRQ: | 
 | 	{ | 
 | 		struct acpi_resource_irq *p = &resource->data.irq; | 
 | 		if (!p || !p->number_of_interrupts) { | 
 | 			ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Blank IRQ resource\n")); | 
 | 			return_ACPI_STATUS(AE_OK); | 
 | 		} | 
 | 		for (i = 0; (i<p->number_of_interrupts && i<ACPI_PCI_LINK_MAX_POSSIBLE); i++) { | 
 | 			if (!p->interrupts[i]) { | 
 | 				ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Invalid IRQ %d\n", p->interrupts[i])); | 
 | 				continue; | 
 | 			} | 
 | 			link->irq.possible[i] = p->interrupts[i]; | 
 | 			link->irq.possible_count++; | 
 | 		} | 
 | 		link->irq.edge_level = p->edge_level; | 
 | 		link->irq.active_high_low = p->active_high_low; | 
 | 		link->irq.resource_type = ACPI_RSTYPE_IRQ; | 
 | 		break; | 
 | 	} | 
 | 	case ACPI_RSTYPE_EXT_IRQ: | 
 | 	{ | 
 | 		struct acpi_resource_ext_irq *p = &resource->data.extended_irq; | 
 | 		if (!p || !p->number_of_interrupts) { | 
 | 			ACPI_DEBUG_PRINT((ACPI_DB_WARN,  | 
 | 				"Blank EXT IRQ resource\n")); | 
 | 			return_ACPI_STATUS(AE_OK); | 
 | 		} | 
 | 		for (i = 0; (i<p->number_of_interrupts && i<ACPI_PCI_LINK_MAX_POSSIBLE); i++) { | 
 | 			if (!p->interrupts[i]) { | 
 | 				ACPI_DEBUG_PRINT((ACPI_DB_WARN, "Invalid IRQ %d\n", p->interrupts[i])); | 
 | 				continue; | 
 | 			} | 
 | 			link->irq.possible[i] = p->interrupts[i]; | 
 | 			link->irq.possible_count++; | 
 | 		} | 
 | 		link->irq.edge_level = p->edge_level; | 
 | 		link->irq.active_high_low = p->active_high_low; | 
 | 		link->irq.resource_type = ACPI_RSTYPE_EXT_IRQ; | 
 | 		break; | 
 | 	} | 
 | 	default: | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,  | 
 | 			"Resource is not an IRQ entry\n")); | 
 | 		return_ACPI_STATUS(AE_OK); | 
 | 	} | 
 |  | 
 | 	return_ACPI_STATUS(AE_CTRL_TERMINATE); | 
 | } | 
 |  | 
 |  | 
 | static int | 
 | acpi_pci_link_get_possible ( | 
 | 	struct acpi_pci_link	*link) | 
 | { | 
 | 	acpi_status		status; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE("acpi_pci_link_get_possible"); | 
 |  | 
 | 	if (!link) | 
 | 		return_VALUE(-EINVAL); | 
 |  | 
 | 	status = acpi_walk_resources(link->handle, METHOD_NAME__PRS, | 
 | 			acpi_pci_link_check_possible, link); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _PRS\n")); | 
 | 		return_VALUE(-ENODEV); | 
 | 	} | 
 |  | 
 | 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,  | 
 | 		"Found %d possible IRQs\n", link->irq.possible_count)); | 
 |  | 
 | 	return_VALUE(0); | 
 | } | 
 |  | 
 |  | 
 | static acpi_status | 
 | acpi_pci_link_check_current ( | 
 | 	struct acpi_resource	*resource, | 
 | 	void			*context) | 
 | { | 
 | 	int			*irq = (int *) context; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE("acpi_pci_link_check_current"); | 
 |  | 
 | 	switch (resource->id) { | 
 | 	case ACPI_RSTYPE_IRQ: | 
 | 	{ | 
 | 		struct acpi_resource_irq *p = &resource->data.irq; | 
 | 		if (!p || !p->number_of_interrupts) { | 
 | 			/* | 
 | 			 * IRQ descriptors may have no IRQ# bits set, | 
 | 			 * particularly those those w/ _STA disabled | 
 | 			 */ | 
 | 			ACPI_DEBUG_PRINT((ACPI_DB_INFO, | 
 | 				"Blank IRQ resource\n"));  | 
 | 			return_ACPI_STATUS(AE_OK); | 
 | 		} | 
 | 		*irq = p->interrupts[0]; | 
 | 		break; | 
 | 	} | 
 | 	case ACPI_RSTYPE_EXT_IRQ: | 
 | 	{ | 
 | 		struct acpi_resource_ext_irq *p = &resource->data.extended_irq; | 
 | 		if (!p || !p->number_of_interrupts) { | 
 | 			/* | 
 | 			 * extended IRQ descriptors must | 
 | 			 * return at least 1 IRQ | 
 | 			 */ | 
 | 			ACPI_DEBUG_PRINT((ACPI_DB_WARN, | 
 | 				"Blank EXT IRQ resource\n")); | 
 | 			return_ACPI_STATUS(AE_OK); | 
 | 		} | 
 | 		*irq = p->interrupts[0]; | 
 | 		break; | 
 | 	} | 
 | 	default: | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, | 
 | 			"Resource isn't an IRQ\n")); | 
 | 		return_ACPI_STATUS(AE_OK); | 
 | 	} | 
 | 	return_ACPI_STATUS(AE_CTRL_TERMINATE); | 
 | } | 
 |  | 
 | /* | 
 |  * Run _CRS and set link->irq.active | 
 |  * | 
 |  * return value: | 
 |  * 0 - success | 
 |  * !0 - failure | 
 |  */ | 
 | static int | 
 | acpi_pci_link_get_current ( | 
 | 	struct acpi_pci_link	*link) | 
 | { | 
 | 	int			result = 0; | 
 | 	acpi_status		status = AE_OK; | 
 | 	int			irq = 0; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE("acpi_pci_link_get_current"); | 
 |  | 
 | 	if (!link || !link->handle) | 
 | 		return_VALUE(-EINVAL); | 
 |  | 
 | 	link->irq.active = 0; | 
 |  | 
 | 	/* in practice, status disabled is meaningless, ignore it */ | 
 | 	if (acpi_strict) { | 
 | 		/* Query _STA, set link->device->status */ | 
 | 		result = acpi_bus_get_status(link->device); | 
 | 		if (result) { | 
 | 			ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unable to read status\n")); | 
 | 			goto end; | 
 | 		} | 
 |  | 
 | 		if (!link->device->status.enabled) { | 
 | 			ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Link disabled\n")); | 
 | 			return_VALUE(0); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/*  | 
 | 	 * Query and parse _CRS to get the current IRQ assignment.  | 
 | 	 */ | 
 |  | 
 | 	status = acpi_walk_resources(link->handle, METHOD_NAME__CRS, | 
 | 			acpi_pci_link_check_current, &irq); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _CRS\n")); | 
 | 		result = -ENODEV; | 
 | 		goto end; | 
 | 	} | 
 |  | 
 | 	if (acpi_strict && !irq) { | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "_CRS returned 0\n")); | 
 | 		result = -ENODEV; | 
 | 	} | 
 |  | 
 | 	link->irq.active = irq; | 
 |  | 
 | 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Link at IRQ %d \n", link->irq.active)); | 
 |  | 
 | end: | 
 | 	return_VALUE(result); | 
 | } | 
 |  | 
 | static int | 
 | acpi_pci_link_set ( | 
 | 	struct acpi_pci_link	*link, | 
 | 	int			irq) | 
 | { | 
 | 	int			result = 0; | 
 | 	acpi_status		status = AE_OK; | 
 | 	struct { | 
 | 		struct acpi_resource	res; | 
 | 		struct acpi_resource	end; | 
 | 	}    *resource; | 
 | 	struct acpi_buffer	buffer = {0, NULL}; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE("acpi_pci_link_set"); | 
 |  | 
 | 	if (!link || !irq) | 
 | 		return_VALUE(-EINVAL); | 
 |  | 
 | 	resource = kmalloc( sizeof(*resource)+1, GFP_KERNEL); | 
 | 	if(!resource) | 
 | 		return_VALUE(-ENOMEM); | 
 |  | 
 | 	memset(resource, 0, sizeof(*resource)+1); | 
 | 	buffer.length = sizeof(*resource) +1; | 
 | 	buffer.pointer = resource; | 
 |  | 
 | 	switch(link->irq.resource_type) { | 
 | 	case ACPI_RSTYPE_IRQ: | 
 | 		resource->res.id = ACPI_RSTYPE_IRQ; | 
 | 		resource->res.length = sizeof(struct acpi_resource); | 
 | 		resource->res.data.irq.edge_level = link->irq.edge_level; | 
 | 		resource->res.data.irq.active_high_low = link->irq.active_high_low; | 
 | 		if (link->irq.edge_level == ACPI_EDGE_SENSITIVE) | 
 | 			resource->res.data.irq.shared_exclusive = ACPI_EXCLUSIVE; | 
 | 		else | 
 | 			resource->res.data.irq.shared_exclusive = ACPI_SHARED; | 
 | 		resource->res.data.irq.number_of_interrupts = 1; | 
 | 		resource->res.data.irq.interrupts[0] = irq; | 
 | 		break; | 
 | 	    | 
 | 	case ACPI_RSTYPE_EXT_IRQ: | 
 | 		resource->res.id = ACPI_RSTYPE_EXT_IRQ; | 
 | 		resource->res.length = sizeof(struct acpi_resource); | 
 | 		resource->res.data.extended_irq.producer_consumer = ACPI_CONSUMER; | 
 | 		resource->res.data.extended_irq.edge_level = link->irq.edge_level; | 
 | 		resource->res.data.extended_irq.active_high_low = link->irq.active_high_low; | 
 | 		if (link->irq.edge_level == ACPI_EDGE_SENSITIVE) | 
 | 			resource->res.data.irq.shared_exclusive = ACPI_EXCLUSIVE; | 
 | 		else | 
 | 			resource->res.data.irq.shared_exclusive = ACPI_SHARED; | 
 | 		resource->res.data.extended_irq.number_of_interrupts = 1; | 
 | 		resource->res.data.extended_irq.interrupts[0] = irq; | 
 | 		/* ignore resource_source, it's optional */ | 
 | 		break; | 
 | 	default: | 
 | 		printk("ACPI BUG: resource_type %d\n", link->irq.resource_type); | 
 | 		result = -EINVAL; | 
 | 		goto end; | 
 |  | 
 | 	} | 
 | 	resource->end.id = ACPI_RSTYPE_END_TAG; | 
 |  | 
 | 	/* Attempt to set the resource */ | 
 | 	status = acpi_set_current_resources(link->handle, &buffer); | 
 |  | 
 | 	/* check for total failure */ | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error evaluating _SRS\n")); | 
 | 		result = -ENODEV; | 
 | 		goto end; | 
 | 	} | 
 |  | 
 | 	/* Query _STA, set device->status */ | 
 | 	result = acpi_bus_get_status(link->device); | 
 | 	if (result) { | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Unable to read status\n")); | 
 | 		goto end; | 
 | 	} | 
 | 	if (!link->device->status.enabled) { | 
 | 		printk(KERN_WARNING PREFIX | 
 | 			"%s [%s] disabled and referenced, BIOS bug.\n", | 
 | 			acpi_device_name(link->device), | 
 | 			acpi_device_bid(link->device)); | 
 | 	} | 
 |  | 
 | 	/* Query _CRS, set link->irq.active */ | 
 | 	result = acpi_pci_link_get_current(link); | 
 | 	if (result) { | 
 | 		goto end; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Is current setting not what we set? | 
 | 	 * set link->irq.active | 
 | 	 */ | 
 | 	if (link->irq.active != irq) { | 
 | 		/* | 
 | 		 * policy: when _CRS doesn't return what we just _SRS | 
 | 		 * assume _SRS worked and override _CRS value. | 
 | 		 */ | 
 | 		printk(KERN_WARNING PREFIX  | 
 | 			"%s [%s] BIOS reported IRQ %d, using IRQ %d\n", | 
 | 			acpi_device_name(link->device), | 
 | 			acpi_device_bid(link->device), | 
 | 			link->irq.active, irq); | 
 | 		link->irq.active = irq; | 
 | 	} | 
 |  | 
 | 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Set IRQ %d\n", link->irq.active)); | 
 | 	 | 
 | end: | 
 | 	kfree(resource); | 
 | 	return_VALUE(result); | 
 | } | 
 |  | 
 |  | 
 | /* -------------------------------------------------------------------------- | 
 |                             PCI Link IRQ Management | 
 |    -------------------------------------------------------------------------- */ | 
 |  | 
 | /* | 
 |  * "acpi_irq_balance" (default in APIC mode) enables ACPI to use PIC Interrupt | 
 |  * Link Devices to move the PIRQs around to minimize sharing. | 
 |  *  | 
 |  * "acpi_irq_nobalance" (default in PIC mode) tells ACPI not to move any PIC IRQs | 
 |  * that the BIOS has already set to active.  This is necessary because | 
 |  * ACPI has no automatic means of knowing what ISA IRQs are used.  Note that | 
 |  * if the BIOS doesn't set a Link Device active, ACPI needs to program it | 
 |  * even if acpi_irq_nobalance is set. | 
 |  * | 
 |  * A tables of penalties avoids directing PCI interrupts to well known | 
 |  * ISA IRQs. Boot params are available to over-ride the default table: | 
 |  * | 
 |  * List interrupts that are free for PCI use. | 
 |  * acpi_irq_pci=n[,m] | 
 |  * | 
 |  * List interrupts that should not be used for PCI: | 
 |  * acpi_irq_isa=n[,m] | 
 |  * | 
 |  * Note that PCI IRQ routers have a list of possible IRQs, | 
 |  * which may not include the IRQs this table says are available. | 
 |  *  | 
 |  * Since this heuristic can't tell the difference between a link | 
 |  * that no device will attach to, vs. a link which may be shared | 
 |  * by multiple active devices -- it is not optimal. | 
 |  * | 
 |  * If interrupt performance is that important, get an IO-APIC system | 
 |  * with a pin dedicated to each device.  Or for that matter, an MSI | 
 |  * enabled system. | 
 |  */ | 
 |  | 
 | #define ACPI_MAX_IRQS		256 | 
 | #define ACPI_MAX_ISA_IRQ	16 | 
 |  | 
 | #define PIRQ_PENALTY_PCI_AVAILABLE	(0) | 
 | #define PIRQ_PENALTY_PCI_POSSIBLE	(16*16) | 
 | #define PIRQ_PENALTY_PCI_USING		(16*16*16) | 
 | #define PIRQ_PENALTY_ISA_TYPICAL	(16*16*16*16) | 
 | #define PIRQ_PENALTY_ISA_USED		(16*16*16*16*16) | 
 | #define PIRQ_PENALTY_ISA_ALWAYS		(16*16*16*16*16*16) | 
 |  | 
 | static int acpi_irq_penalty[ACPI_MAX_IRQS] = { | 
 | 	PIRQ_PENALTY_ISA_ALWAYS,	/* IRQ0 timer */ | 
 | 	PIRQ_PENALTY_ISA_ALWAYS,	/* IRQ1 keyboard */ | 
 | 	PIRQ_PENALTY_ISA_ALWAYS,	/* IRQ2 cascade */ | 
 | 	PIRQ_PENALTY_ISA_TYPICAL,	/* IRQ3	serial */ | 
 | 	PIRQ_PENALTY_ISA_TYPICAL,	/* IRQ4	serial */ | 
 | 	PIRQ_PENALTY_ISA_TYPICAL,	/* IRQ5 sometimes SoundBlaster */ | 
 | 	PIRQ_PENALTY_ISA_TYPICAL,	/* IRQ6 */ | 
 | 	PIRQ_PENALTY_ISA_TYPICAL,	/* IRQ7 parallel, spurious */ | 
 | 	PIRQ_PENALTY_ISA_TYPICAL,	/* IRQ8 rtc, sometimes */ | 
 | 	PIRQ_PENALTY_PCI_AVAILABLE,	/* IRQ9  PCI, often acpi */ | 
 | 	PIRQ_PENALTY_PCI_AVAILABLE,	/* IRQ10 PCI */ | 
 | 	PIRQ_PENALTY_PCI_AVAILABLE,	/* IRQ11 PCI */ | 
 | 	PIRQ_PENALTY_ISA_USED,	/* IRQ12 mouse */ | 
 | 	PIRQ_PENALTY_ISA_USED,	/* IRQ13 fpe, sometimes */ | 
 | 	PIRQ_PENALTY_ISA_USED,	/* IRQ14 ide0 */ | 
 | 	PIRQ_PENALTY_ISA_USED,	/* IRQ15 ide1 */ | 
 | 			/* >IRQ15 */ | 
 | }; | 
 |  | 
 | int __init | 
 | acpi_irq_penalty_init(void) | 
 | { | 
 | 	struct list_head	*node = NULL; | 
 | 	struct acpi_pci_link    *link = NULL; | 
 | 	int			i = 0; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE("acpi_irq_penalty_init"); | 
 |  | 
 | 	/* | 
 | 	 * Update penalties to facilitate IRQ balancing. | 
 | 	 */ | 
 | 	list_for_each(node, &acpi_link.entries) { | 
 |  | 
 | 		link = list_entry(node, struct acpi_pci_link, node); | 
 | 		if (!link) { | 
 | 			ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n")); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * reflect the possible and active irqs in the penalty table -- | 
 | 		 * useful for breaking ties. | 
 | 		 */ | 
 | 		if (link->irq.possible_count) { | 
 | 			int penalty = PIRQ_PENALTY_PCI_POSSIBLE / link->irq.possible_count; | 
 |  | 
 | 			for (i = 0; i < link->irq.possible_count; i++) { | 
 | 				if (link->irq.possible[i] < ACPI_MAX_ISA_IRQ) | 
 | 					acpi_irq_penalty[link->irq.possible[i]] += penalty; | 
 | 			} | 
 |  | 
 | 		} else if (link->irq.active) { | 
 | 			acpi_irq_penalty[link->irq.active] += PIRQ_PENALTY_PCI_POSSIBLE; | 
 | 		} | 
 | 	} | 
 | 	/* Add a penalty for the SCI */ | 
 | 	acpi_irq_penalty[acpi_fadt.sci_int] += PIRQ_PENALTY_PCI_USING; | 
 |  | 
 | 	return_VALUE(0); | 
 | } | 
 |  | 
 | static int acpi_irq_balance;	/* 0: static, 1: balance */ | 
 |  | 
 | static int acpi_pci_link_allocate( | 
 | 	struct acpi_pci_link	*link) | 
 | { | 
 | 	int			irq; | 
 | 	int			i; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE("acpi_pci_link_allocate"); | 
 |  | 
 | 	if (link->irq.initialized) | 
 | 		return_VALUE(0); | 
 |  | 
 | 	/* | 
 | 	 * search for active IRQ in list of possible IRQs. | 
 | 	 */ | 
 | 	for (i = 0; i < link->irq.possible_count; ++i) { | 
 | 		if (link->irq.active == link->irq.possible[i]) | 
 | 			break; | 
 | 	} | 
 | 	/* | 
 | 	 * forget active IRQ that is not in possible list | 
 | 	 */ | 
 | 	if (i == link->irq.possible_count) { | 
 | 		if (acpi_strict) | 
 | 			printk(KERN_WARNING PREFIX "_CRS %d not found" | 
 | 				" in _PRS\n", link->irq.active); | 
 | 		link->irq.active = 0; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * if active found, use it; else pick entry from end of possible list. | 
 | 	 */ | 
 | 	if (link->irq.active) { | 
 | 		irq = link->irq.active; | 
 | 	} else { | 
 | 		irq = link->irq.possible[link->irq.possible_count - 1]; | 
 | 	} | 
 |  | 
 | 	if (acpi_irq_balance || !link->irq.active) { | 
 | 		/* | 
 | 		 * Select the best IRQ.  This is done in reverse to promote | 
 | 		 * the use of IRQs 9, 10, 11, and >15. | 
 | 		 */ | 
 | 		for (i = (link->irq.possible_count - 1); i >= 0; i--) { | 
 | 			if (acpi_irq_penalty[irq] > acpi_irq_penalty[link->irq.possible[i]]) | 
 | 				irq = link->irq.possible[i]; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Attempt to enable the link device at this IRQ. */ | 
 | 	if (acpi_pci_link_set(link, irq)) { | 
 | 		printk(PREFIX "Unable to set IRQ for %s [%s] (likely buggy ACPI BIOS).\n" | 
 | 				"Try pci=noacpi or acpi=off\n", | 
 | 			acpi_device_name(link->device), | 
 | 			acpi_device_bid(link->device)); | 
 | 		return_VALUE(-ENODEV); | 
 | 	} else { | 
 | 		acpi_irq_penalty[link->irq.active] += PIRQ_PENALTY_PCI_USING; | 
 | 		printk(PREFIX "%s [%s] enabled at IRQ %d\n",  | 
 | 			acpi_device_name(link->device), | 
 | 			acpi_device_bid(link->device), link->irq.active); | 
 | 	} | 
 |  | 
 | 	link->irq.initialized = 1; | 
 |  | 
 | 	return_VALUE(0); | 
 | } | 
 |  | 
 | /* | 
 |  * acpi_pci_link_get_irq | 
 |  * success: return IRQ >= 0 | 
 |  * failure: return -1 | 
 |  */ | 
 |  | 
 | int | 
 | acpi_pci_link_get_irq ( | 
 | 	acpi_handle		handle, | 
 | 	int			index, | 
 | 	int			*edge_level, | 
 | 	int			*active_high_low, | 
 | 	char			**name) | 
 | { | 
 | 	int                     result = 0; | 
 | 	struct acpi_device	*device = NULL; | 
 | 	struct acpi_pci_link	*link = NULL; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE("acpi_pci_link_get_irq"); | 
 |  | 
 | 	result = acpi_bus_get_device(handle, &device); | 
 | 	if (result) { | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link device\n")); | 
 | 		return_VALUE(-1); | 
 | 	} | 
 |  | 
 | 	link = (struct acpi_pci_link *) acpi_driver_data(device); | 
 | 	if (!link) { | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n")); | 
 | 		return_VALUE(-1); | 
 | 	} | 
 |  | 
 | 	/* TBD: Support multiple index (IRQ) entries per Link Device */ | 
 | 	if (index) { | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid index %d\n", index)); | 
 | 		return_VALUE(-1); | 
 | 	} | 
 |  | 
 | 	if (acpi_pci_link_allocate(link)) | 
 | 		return_VALUE(-1); | 
 | 	    | 
 | 	if (!link->irq.active) { | 
 | 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Link active IRQ is 0!\n")); | 
 | 		return_VALUE(-1); | 
 | 	} | 
 |  | 
 | 	if (edge_level) *edge_level = link->irq.edge_level; | 
 | 	if (active_high_low) *active_high_low = link->irq.active_high_low; | 
 | 	if (name) *name = acpi_device_bid(link->device); | 
 | 	return_VALUE(link->irq.active); | 
 | } | 
 |  | 
 |  | 
 | /* -------------------------------------------------------------------------- | 
 |                                  Driver Interface | 
 |    -------------------------------------------------------------------------- */ | 
 |  | 
 | static int | 
 | acpi_pci_link_add ( | 
 | 	struct acpi_device *device) | 
 | { | 
 | 	int			result = 0; | 
 | 	struct acpi_pci_link	*link = NULL; | 
 | 	int			i = 0; | 
 | 	int			found = 0; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE("acpi_pci_link_add"); | 
 |  | 
 | 	if (!device) | 
 | 		return_VALUE(-EINVAL); | 
 |  | 
 | 	link = kmalloc(sizeof(struct acpi_pci_link), GFP_KERNEL); | 
 | 	if (!link) | 
 | 		return_VALUE(-ENOMEM); | 
 | 	memset(link, 0, sizeof(struct acpi_pci_link)); | 
 |  | 
 | 	link->device = device; | 
 | 	link->handle = device->handle; | 
 | 	strcpy(acpi_device_name(device), ACPI_PCI_LINK_DEVICE_NAME); | 
 | 	strcpy(acpi_device_class(device), ACPI_PCI_LINK_CLASS); | 
 | 	acpi_driver_data(device) = link; | 
 |  | 
 | 	result = acpi_pci_link_get_possible(link); | 
 | 	if (result) | 
 | 		goto end; | 
 |  | 
 | 	/* query and set link->irq.active */ | 
 | 	acpi_pci_link_get_current(link); | 
 |  | 
 | 	printk(PREFIX "%s [%s] (IRQs", acpi_device_name(device), | 
 | 		acpi_device_bid(device)); | 
 | 	for (i = 0; i < link->irq.possible_count; i++) { | 
 | 		if (link->irq.active == link->irq.possible[i]) { | 
 | 			printk(" *%d", link->irq.possible[i]); | 
 | 			found = 1; | 
 | 		} | 
 | 		else | 
 | 			printk(" %d", link->irq.possible[i]); | 
 | 	} | 
 |  | 
 | 	printk(")"); | 
 |  | 
 | 	if (!found) | 
 | 		printk(" *%d", link->irq.active); | 
 |  | 
 | 	if(!link->device->status.enabled) | 
 | 		printk(", disabled."); | 
 |  | 
 | 	printk("\n"); | 
 |  | 
 | 	/* TBD: Acquire/release lock */ | 
 | 	list_add_tail(&link->node, &acpi_link.entries); | 
 | 	acpi_link.count++; | 
 |  | 
 | end: | 
 | 	/* disable all links -- to be activated on use */ | 
 | 	acpi_ut_evaluate_object(link->handle, "_DIS", 0, NULL); | 
 |  | 
 | 	if (result) | 
 | 		kfree(link); | 
 |  | 
 | 	return_VALUE(result); | 
 | } | 
 |  | 
 |  | 
 | static int | 
 | acpi_pci_link_resume ( | 
 | 	struct acpi_pci_link	*link) | 
 | { | 
 | 	ACPI_FUNCTION_TRACE("acpi_pci_link_resume"); | 
 | 	 | 
 | 	if (link->irq.active && link->irq.initialized) | 
 | 		return_VALUE(acpi_pci_link_set(link, link->irq.active)); | 
 | 	else | 
 | 		return_VALUE(0); | 
 | } | 
 |  | 
 |  | 
 | static int | 
 | irqrouter_resume( | 
 | 	struct sys_device *dev) | 
 | { | 
 | 	struct list_head        *node = NULL; | 
 | 	struct acpi_pci_link    *link = NULL; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE("irqrouter_resume"); | 
 |  | 
 | 	list_for_each(node, &acpi_link.entries) { | 
 |  | 
 | 		link = list_entry(node, struct acpi_pci_link, node); | 
 | 		if (!link) { | 
 | 			ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid link context\n")); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		acpi_pci_link_resume(link); | 
 | 	} | 
 | 	return_VALUE(0); | 
 | } | 
 |  | 
 |  | 
 | static int | 
 | acpi_pci_link_remove ( | 
 | 	struct acpi_device	*device, | 
 | 	int			type) | 
 | { | 
 | 	struct acpi_pci_link *link = NULL; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE("acpi_pci_link_remove"); | 
 |  | 
 | 	if (!device || !acpi_driver_data(device)) | 
 | 		return_VALUE(-EINVAL); | 
 |  | 
 | 	link = (struct acpi_pci_link *) acpi_driver_data(device); | 
 |  | 
 | 	/* TBD: Acquire/release lock */ | 
 | 	list_del(&link->node); | 
 |  | 
 | 	kfree(link); | 
 |  | 
 | 	return_VALUE(0); | 
 | } | 
 |  | 
 | /* | 
 |  * modify acpi_irq_penalty[] from cmdline | 
 |  */ | 
 | static int __init acpi_irq_penalty_update(char *str, int used) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < 16; i++) { | 
 | 		int retval; | 
 | 		int irq; | 
 |  | 
 | 		retval = get_option(&str,&irq); | 
 |  | 
 | 		if (!retval) | 
 | 			break;	/* no number found */ | 
 |  | 
 | 		if (irq < 0) | 
 | 			continue; | 
 | 		 | 
 | 		if (irq >= ACPI_MAX_IRQS) | 
 | 			continue; | 
 |  | 
 | 		if (used) | 
 | 			acpi_irq_penalty[irq] += PIRQ_PENALTY_ISA_USED; | 
 | 		else | 
 | 			acpi_irq_penalty[irq] = PIRQ_PENALTY_PCI_AVAILABLE; | 
 |  | 
 | 		if (retval != 2)	/* no next number */ | 
 | 			break; | 
 | 	} | 
 | 	return 1; | 
 | } | 
 |  | 
 | /* | 
 |  * We'd like PNP to call this routine for the | 
 |  * single ISA_USED value for each legacy device. | 
 |  * But instead it calls us with each POSSIBLE setting. | 
 |  * There is no ISA_POSSIBLE weight, so we simply use | 
 |  * the (small) PCI_USING penalty. | 
 |  */ | 
 | void acpi_penalize_isa_irq(int irq) | 
 | { | 
 | 	acpi_irq_penalty[irq] += PIRQ_PENALTY_PCI_USING; | 
 | } | 
 |  | 
 | /* | 
 |  * Over-ride default table to reserve additional IRQs for use by ISA | 
 |  * e.g. acpi_irq_isa=5 | 
 |  * Useful for telling ACPI how not to interfere with your ISA sound card. | 
 |  */ | 
 | static int __init acpi_irq_isa(char *str) | 
 | { | 
 | 	return acpi_irq_penalty_update(str, 1); | 
 | } | 
 | __setup("acpi_irq_isa=", acpi_irq_isa); | 
 |  | 
 | /* | 
 |  * Over-ride default table to free additional IRQs for use by PCI | 
 |  * e.g. acpi_irq_pci=7,15 | 
 |  * Used for acpi_irq_balance to free up IRQs to reduce PCI IRQ sharing. | 
 |  */ | 
 | static int __init acpi_irq_pci(char *str) | 
 | { | 
 | 	return acpi_irq_penalty_update(str, 0); | 
 | } | 
 | __setup("acpi_irq_pci=", acpi_irq_pci); | 
 |  | 
 | static int __init acpi_irq_nobalance_set(char *str) | 
 | { | 
 | 	acpi_irq_balance = 0; | 
 | 	return 1; | 
 | } | 
 | __setup("acpi_irq_nobalance", acpi_irq_nobalance_set); | 
 |  | 
 | int __init acpi_irq_balance_set(char *str) | 
 | { | 
 | 	acpi_irq_balance = 1; | 
 | 	return 1; | 
 | } | 
 | __setup("acpi_irq_balance", acpi_irq_balance_set); | 
 |  | 
 |  | 
 | static struct sysdev_class irqrouter_sysdev_class = { | 
 |         set_kset_name("irqrouter"), | 
 |         .resume = irqrouter_resume, | 
 | }; | 
 |  | 
 |  | 
 | static struct sys_device device_irqrouter = { | 
 | 	.id     = 0, | 
 | 	.cls    = &irqrouter_sysdev_class, | 
 | }; | 
 |  | 
 |  | 
 | static int __init irqrouter_init_sysfs(void) | 
 | { | 
 | 	int error; | 
 |  | 
 | 	ACPI_FUNCTION_TRACE("irqrouter_init_sysfs"); | 
 |  | 
 | 	if (acpi_disabled || acpi_noirq) | 
 | 		return_VALUE(0); | 
 |  | 
 | 	error = sysdev_class_register(&irqrouter_sysdev_class); | 
 | 	if (!error) | 
 | 		error = sysdev_register(&device_irqrouter); | 
 |  | 
 | 	return_VALUE(error); | 
 | }                                         | 
 |  | 
 | device_initcall(irqrouter_init_sysfs); | 
 |  | 
 |  | 
 | static int __init acpi_pci_link_init (void) | 
 | { | 
 | 	ACPI_FUNCTION_TRACE("acpi_pci_link_init"); | 
 |  | 
 | 	if (acpi_noirq) | 
 | 		return_VALUE(0); | 
 |  | 
 | 	acpi_link.count = 0; | 
 | 	INIT_LIST_HEAD(&acpi_link.entries); | 
 |  | 
 | 	if (acpi_bus_register_driver(&acpi_pci_link_driver) < 0) | 
 | 		return_VALUE(-ENODEV); | 
 |  | 
 | 	return_VALUE(0); | 
 | } | 
 |  | 
 | subsys_initcall(acpi_pci_link_init); |