|  | /* | 
|  | * n810.c  --  SoC audio for Nokia N810 | 
|  | * | 
|  | * Copyright (C) 2008 Nokia Corporation | 
|  | * | 
|  | * Contact: Jarkko Nikula <jhnikula@gmail.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * version 2 as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
|  | * 02110-1301 USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <sound/core.h> | 
|  | #include <sound/pcm.h> | 
|  | #include <sound/soc.h> | 
|  | #include <sound/soc-dapm.h> | 
|  |  | 
|  | #include <asm/mach-types.h> | 
|  | #include <mach/hardware.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <mach/mcbsp.h> | 
|  |  | 
|  | #include "omap-mcbsp.h" | 
|  | #include "omap-pcm.h" | 
|  | #include "../codecs/tlv320aic3x.h" | 
|  |  | 
|  | #define N810_HEADSET_AMP_GPIO	10 | 
|  | #define N810_SPEAKER_AMP_GPIO	101 | 
|  |  | 
|  | enum { | 
|  | N810_JACK_DISABLED, | 
|  | N810_JACK_HP, | 
|  | N810_JACK_HS, | 
|  | N810_JACK_MIC, | 
|  | }; | 
|  |  | 
|  | static struct clk *sys_clkout2; | 
|  | static struct clk *sys_clkout2_src; | 
|  | static struct clk *func96m_clk; | 
|  |  | 
|  | static int n810_spk_func; | 
|  | static int n810_jack_func; | 
|  | static int n810_dmic_func; | 
|  |  | 
|  | static void n810_ext_control(struct snd_soc_codec *codec) | 
|  | { | 
|  | int hp = 0, line1l = 0; | 
|  |  | 
|  | switch (n810_jack_func) { | 
|  | case N810_JACK_HS: | 
|  | line1l = 1; | 
|  | case N810_JACK_HP: | 
|  | hp = 1; | 
|  | break; | 
|  | case N810_JACK_MIC: | 
|  | line1l = 1; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (n810_spk_func) | 
|  | snd_soc_dapm_enable_pin(codec, "Ext Spk"); | 
|  | else | 
|  | snd_soc_dapm_disable_pin(codec, "Ext Spk"); | 
|  |  | 
|  | if (hp) | 
|  | snd_soc_dapm_enable_pin(codec, "Headphone Jack"); | 
|  | else | 
|  | snd_soc_dapm_disable_pin(codec, "Headphone Jack"); | 
|  | if (line1l) | 
|  | snd_soc_dapm_enable_pin(codec, "LINE1L"); | 
|  | else | 
|  | snd_soc_dapm_disable_pin(codec, "LINE1L"); | 
|  |  | 
|  | if (n810_dmic_func) | 
|  | snd_soc_dapm_enable_pin(codec, "DMic"); | 
|  | else | 
|  | snd_soc_dapm_disable_pin(codec, "DMic"); | 
|  |  | 
|  | snd_soc_dapm_sync(codec); | 
|  | } | 
|  |  | 
|  | static int n810_startup(struct snd_pcm_substream *substream) | 
|  | { | 
|  | struct snd_pcm_runtime *runtime = substream->runtime; | 
|  | struct snd_soc_pcm_runtime *rtd = substream->private_data; | 
|  | struct snd_soc_codec *codec = rtd->socdev->card->codec; | 
|  |  | 
|  | snd_pcm_hw_constraint_minmax(runtime, | 
|  | SNDRV_PCM_HW_PARAM_CHANNELS, 2, 2); | 
|  |  | 
|  | n810_ext_control(codec); | 
|  | return clk_enable(sys_clkout2); | 
|  | } | 
|  |  | 
|  | static void n810_shutdown(struct snd_pcm_substream *substream) | 
|  | { | 
|  | clk_disable(sys_clkout2); | 
|  | } | 
|  |  | 
|  | static int n810_hw_params(struct snd_pcm_substream *substream, | 
|  | struct snd_pcm_hw_params *params) | 
|  | { | 
|  | struct snd_soc_pcm_runtime *rtd = substream->private_data; | 
|  | struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; | 
|  | struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; | 
|  | int err; | 
|  |  | 
|  | /* Set codec DAI configuration */ | 
|  | err = snd_soc_dai_set_fmt(codec_dai, | 
|  | SND_SOC_DAIFMT_I2S | | 
|  | SND_SOC_DAIFMT_NB_NF | | 
|  | SND_SOC_DAIFMT_CBM_CFM); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | /* Set cpu DAI configuration */ | 
|  | err = snd_soc_dai_set_fmt(cpu_dai, | 
|  | SND_SOC_DAIFMT_I2S | | 
|  | SND_SOC_DAIFMT_NB_NF | | 
|  | SND_SOC_DAIFMT_CBM_CFM); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | /* Set the codec system clock for DAC and ADC */ | 
|  | err = snd_soc_dai_set_sysclk(codec_dai, 0, 12000000, | 
|  | SND_SOC_CLOCK_IN); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static struct snd_soc_ops n810_ops = { | 
|  | .startup = n810_startup, | 
|  | .hw_params = n810_hw_params, | 
|  | .shutdown = n810_shutdown, | 
|  | }; | 
|  |  | 
|  | static int n810_get_spk(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | ucontrol->value.integer.value[0] = n810_spk_func; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int n810_set_spk(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_soc_codec *codec =  snd_kcontrol_chip(kcontrol); | 
|  |  | 
|  | if (n810_spk_func == ucontrol->value.integer.value[0]) | 
|  | return 0; | 
|  |  | 
|  | n810_spk_func = ucontrol->value.integer.value[0]; | 
|  | n810_ext_control(codec); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int n810_get_jack(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | ucontrol->value.integer.value[0] = n810_jack_func; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int n810_set_jack(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_soc_codec *codec =  snd_kcontrol_chip(kcontrol); | 
|  |  | 
|  | if (n810_jack_func == ucontrol->value.integer.value[0]) | 
|  | return 0; | 
|  |  | 
|  | n810_jack_func = ucontrol->value.integer.value[0]; | 
|  | n810_ext_control(codec); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int n810_get_input(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | ucontrol->value.integer.value[0] = n810_dmic_func; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int n810_set_input(struct snd_kcontrol *kcontrol, | 
|  | struct snd_ctl_elem_value *ucontrol) | 
|  | { | 
|  | struct snd_soc_codec *codec =  snd_kcontrol_chip(kcontrol); | 
|  |  | 
|  | if (n810_dmic_func == ucontrol->value.integer.value[0]) | 
|  | return 0; | 
|  |  | 
|  | n810_dmic_func = ucontrol->value.integer.value[0]; | 
|  | n810_ext_control(codec); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int n810_spk_event(struct snd_soc_dapm_widget *w, | 
|  | struct snd_kcontrol *k, int event) | 
|  | { | 
|  | if (SND_SOC_DAPM_EVENT_ON(event)) | 
|  | gpio_set_value(N810_SPEAKER_AMP_GPIO, 1); | 
|  | else | 
|  | gpio_set_value(N810_SPEAKER_AMP_GPIO, 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int n810_jack_event(struct snd_soc_dapm_widget *w, | 
|  | struct snd_kcontrol *k, int event) | 
|  | { | 
|  | if (SND_SOC_DAPM_EVENT_ON(event)) | 
|  | gpio_set_value(N810_HEADSET_AMP_GPIO, 1); | 
|  | else | 
|  | gpio_set_value(N810_HEADSET_AMP_GPIO, 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct snd_soc_dapm_widget aic33_dapm_widgets[] = { | 
|  | SND_SOC_DAPM_SPK("Ext Spk", n810_spk_event), | 
|  | SND_SOC_DAPM_HP("Headphone Jack", n810_jack_event), | 
|  | SND_SOC_DAPM_MIC("DMic", NULL), | 
|  | }; | 
|  |  | 
|  | static const struct snd_soc_dapm_route audio_map[] = { | 
|  | {"Headphone Jack", NULL, "HPLOUT"}, | 
|  | {"Headphone Jack", NULL, "HPROUT"}, | 
|  |  | 
|  | {"Ext Spk", NULL, "LLOUT"}, | 
|  | {"Ext Spk", NULL, "RLOUT"}, | 
|  |  | 
|  | {"DMic Rate 64", NULL, "Mic Bias 2V"}, | 
|  | {"Mic Bias 2V", NULL, "DMic"}, | 
|  | }; | 
|  |  | 
|  | static const char *spk_function[] = {"Off", "On"}; | 
|  | static const char *jack_function[] = {"Off", "Headphone", "Headset", "Mic"}; | 
|  | static const char *input_function[] = {"ADC", "Digital Mic"}; | 
|  | static const struct soc_enum n810_enum[] = { | 
|  | SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(spk_function), spk_function), | 
|  | SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(jack_function), jack_function), | 
|  | SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(input_function), input_function), | 
|  | }; | 
|  |  | 
|  | static const struct snd_kcontrol_new aic33_n810_controls[] = { | 
|  | SOC_ENUM_EXT("Speaker Function", n810_enum[0], | 
|  | n810_get_spk, n810_set_spk), | 
|  | SOC_ENUM_EXT("Jack Function", n810_enum[1], | 
|  | n810_get_jack, n810_set_jack), | 
|  | SOC_ENUM_EXT("Input Select",  n810_enum[2], | 
|  | n810_get_input, n810_set_input), | 
|  | }; | 
|  |  | 
|  | static int n810_aic33_init(struct snd_soc_codec *codec) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | /* Not connected */ | 
|  | snd_soc_dapm_nc_pin(codec, "MONO_LOUT"); | 
|  | snd_soc_dapm_nc_pin(codec, "HPLCOM"); | 
|  | snd_soc_dapm_nc_pin(codec, "HPRCOM"); | 
|  | snd_soc_dapm_nc_pin(codec, "MIC3L"); | 
|  | snd_soc_dapm_nc_pin(codec, "MIC3R"); | 
|  | snd_soc_dapm_nc_pin(codec, "LINE1R"); | 
|  | snd_soc_dapm_nc_pin(codec, "LINE2L"); | 
|  | snd_soc_dapm_nc_pin(codec, "LINE2R"); | 
|  |  | 
|  | /* Add N810 specific controls */ | 
|  | err = snd_soc_add_controls(codec, aic33_n810_controls, | 
|  | ARRAY_SIZE(aic33_n810_controls)); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | /* Add N810 specific widgets */ | 
|  | snd_soc_dapm_new_controls(codec, aic33_dapm_widgets, | 
|  | ARRAY_SIZE(aic33_dapm_widgets)); | 
|  |  | 
|  | /* Set up N810 specific audio path audio_map */ | 
|  | snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); | 
|  |  | 
|  | snd_soc_dapm_sync(codec); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Digital audio interface glue - connects codec <--> CPU */ | 
|  | static struct snd_soc_dai_link n810_dai = { | 
|  | .name = "TLV320AIC33", | 
|  | .stream_name = "AIC33", | 
|  | .cpu_dai = &omap_mcbsp_dai[0], | 
|  | .codec_dai = &aic3x_dai, | 
|  | .init = n810_aic33_init, | 
|  | .ops = &n810_ops, | 
|  | }; | 
|  |  | 
|  | /* Audio machine driver */ | 
|  | static struct snd_soc_card snd_soc_n810 = { | 
|  | .name = "N810", | 
|  | .platform = &omap_soc_platform, | 
|  | .dai_link = &n810_dai, | 
|  | .num_links = 1, | 
|  | }; | 
|  |  | 
|  | /* Audio private data */ | 
|  | static struct aic3x_setup_data n810_aic33_setup = { | 
|  | .gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED, | 
|  | .gpio_func[1] = AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT, | 
|  | }; | 
|  |  | 
|  | /* Audio subsystem */ | 
|  | static struct snd_soc_device n810_snd_devdata = { | 
|  | .card = &snd_soc_n810, | 
|  | .codec_dev = &soc_codec_dev_aic3x, | 
|  | .codec_data = &n810_aic33_setup, | 
|  | }; | 
|  |  | 
|  | static struct platform_device *n810_snd_device; | 
|  |  | 
|  | /* temporary i2c device creation until this can be moved into the machine | 
|  | * support file. | 
|  | */ | 
|  | static struct i2c_board_info i2c_device[] = { | 
|  | { I2C_BOARD_INFO("tlv320aic3x", 0x1b), } | 
|  | }; | 
|  |  | 
|  | static int __init n810_soc_init(void) | 
|  | { | 
|  | int err; | 
|  | struct device *dev; | 
|  |  | 
|  | if (!(machine_is_nokia_n810() || machine_is_nokia_n810_wimax())) | 
|  | return -ENODEV; | 
|  |  | 
|  | i2c_register_board_info(1, i2c_device, ARRAY_SIZE(i2c_device)); | 
|  |  | 
|  | n810_snd_device = platform_device_alloc("soc-audio", -1); | 
|  | if (!n810_snd_device) | 
|  | return -ENOMEM; | 
|  |  | 
|  | platform_set_drvdata(n810_snd_device, &n810_snd_devdata); | 
|  | n810_snd_devdata.dev = &n810_snd_device->dev; | 
|  | *(unsigned int *)n810_dai.cpu_dai->private_data = 1; /* McBSP2 */ | 
|  | err = platform_device_add(n810_snd_device); | 
|  | if (err) | 
|  | goto err1; | 
|  |  | 
|  | dev = &n810_snd_device->dev; | 
|  |  | 
|  | sys_clkout2_src = clk_get(dev, "sys_clkout2_src"); | 
|  | if (IS_ERR(sys_clkout2_src)) { | 
|  | dev_err(dev, "Could not get sys_clkout2_src clock\n"); | 
|  | err = PTR_ERR(sys_clkout2_src); | 
|  | goto err2; | 
|  | } | 
|  | sys_clkout2 = clk_get(dev, "sys_clkout2"); | 
|  | if (IS_ERR(sys_clkout2)) { | 
|  | dev_err(dev, "Could not get sys_clkout2\n"); | 
|  | err = PTR_ERR(sys_clkout2); | 
|  | goto err3; | 
|  | } | 
|  | /* | 
|  | * Configure 12 MHz output on SYS_CLKOUT2. Therefore we must use | 
|  | * 96 MHz as its parent in order to get 12 MHz | 
|  | */ | 
|  | func96m_clk = clk_get(dev, "func_96m_ck"); | 
|  | if (IS_ERR(func96m_clk)) { | 
|  | dev_err(dev, "Could not get func 96M clock\n"); | 
|  | err = PTR_ERR(func96m_clk); | 
|  | goto err4; | 
|  | } | 
|  | clk_set_parent(sys_clkout2_src, func96m_clk); | 
|  | clk_set_rate(sys_clkout2, 12000000); | 
|  |  | 
|  | BUG_ON((gpio_request(N810_HEADSET_AMP_GPIO, "hs_amp") < 0) || | 
|  | (gpio_request(N810_SPEAKER_AMP_GPIO, "spk_amp") < 0)); | 
|  |  | 
|  | gpio_direction_output(N810_HEADSET_AMP_GPIO, 0); | 
|  | gpio_direction_output(N810_SPEAKER_AMP_GPIO, 0); | 
|  |  | 
|  | return 0; | 
|  | err4: | 
|  | clk_put(sys_clkout2); | 
|  | err3: | 
|  | clk_put(sys_clkout2_src); | 
|  | err2: | 
|  | platform_device_del(n810_snd_device); | 
|  | err1: | 
|  | platform_device_put(n810_snd_device); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void __exit n810_soc_exit(void) | 
|  | { | 
|  | gpio_free(N810_SPEAKER_AMP_GPIO); | 
|  | gpio_free(N810_HEADSET_AMP_GPIO); | 
|  | clk_put(sys_clkout2_src); | 
|  | clk_put(sys_clkout2); | 
|  | clk_put(func96m_clk); | 
|  |  | 
|  | platform_device_unregister(n810_snd_device); | 
|  | } | 
|  |  | 
|  | module_init(n810_soc_init); | 
|  | module_exit(n810_soc_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>"); | 
|  | MODULE_DESCRIPTION("ALSA SoC Nokia N810"); | 
|  | MODULE_LICENSE("GPL"); |