|  | /* | 
|  | * File...........: arch/s390/mm/extmem.c | 
|  | * Author(s)......: Carsten Otte <cotte@de.ibm.com> | 
|  | * 		    Rob M van der Heij <rvdheij@nl.ibm.com> | 
|  | * 		    Steven Shultz <shultzss@us.ibm.com> | 
|  | * Bugreports.to..: <Linux390@de.ibm.com> | 
|  | * (C) IBM Corporation 2002-2004 | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/bootmem.h> | 
|  | #include <linux/ctype.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <asm/page.h> | 
|  | #include <asm/pgtable.h> | 
|  | #include <asm/ebcdic.h> | 
|  | #include <asm/errno.h> | 
|  | #include <asm/extmem.h> | 
|  | #include <asm/cpcmd.h> | 
|  | #include <asm/setup.h> | 
|  |  | 
|  | #define DCSS_DEBUG	/* Debug messages on/off */ | 
|  |  | 
|  | #define DCSS_NAME "extmem" | 
|  | #ifdef DCSS_DEBUG | 
|  | #define PRINT_DEBUG(x...)	printk(KERN_DEBUG DCSS_NAME " debug:" x) | 
|  | #else | 
|  | #define PRINT_DEBUG(x...)   do {} while (0) | 
|  | #endif | 
|  | #define PRINT_INFO(x...)	printk(KERN_INFO DCSS_NAME " info:" x) | 
|  | #define PRINT_WARN(x...)	printk(KERN_WARNING DCSS_NAME " warning:" x) | 
|  | #define PRINT_ERR(x...)		printk(KERN_ERR DCSS_NAME " error:" x) | 
|  |  | 
|  |  | 
|  | #define DCSS_LOADSHR    0x00 | 
|  | #define DCSS_LOADNSR    0x04 | 
|  | #define DCSS_PURGESEG   0x08 | 
|  | #define DCSS_FINDSEG    0x0c | 
|  | #define DCSS_LOADNOLY   0x10 | 
|  | #define DCSS_SEGEXT     0x18 | 
|  | #define DCSS_FINDSEGA   0x0c | 
|  |  | 
|  | struct qrange { | 
|  | unsigned int  start; // 3byte start address, 1 byte type | 
|  | unsigned int  end;   // 3byte end address, 1 byte reserved | 
|  | }; | 
|  |  | 
|  | struct qout64 { | 
|  | int segstart; | 
|  | int segend; | 
|  | int segcnt; | 
|  | int segrcnt; | 
|  | struct qrange range[6]; | 
|  | }; | 
|  |  | 
|  | struct qin64 { | 
|  | char qopcode; | 
|  | char rsrv1[3]; | 
|  | char qrcode; | 
|  | char rsrv2[3]; | 
|  | char qname[8]; | 
|  | unsigned int qoutptr; | 
|  | short int qoutlen; | 
|  | }; | 
|  |  | 
|  | struct dcss_segment { | 
|  | struct list_head list; | 
|  | char dcss_name[8]; | 
|  | char res_name[15]; | 
|  | unsigned long start_addr; | 
|  | unsigned long end; | 
|  | atomic_t ref_count; | 
|  | int do_nonshared; | 
|  | unsigned int vm_segtype; | 
|  | struct qrange range[6]; | 
|  | int segcnt; | 
|  | struct resource *res; | 
|  | }; | 
|  |  | 
|  | static DEFINE_MUTEX(dcss_lock); | 
|  | static struct list_head dcss_list = LIST_HEAD_INIT(dcss_list); | 
|  | static char *segtype_string[] = { "SW", "EW", "SR", "ER", "SN", "EN", "SC", | 
|  | "EW/EN-MIXED" }; | 
|  |  | 
|  | /* | 
|  | * Create the 8 bytes, ebcdic VM segment name from | 
|  | * an ascii name. | 
|  | */ | 
|  | static void | 
|  | dcss_mkname(char *name, char *dcss_name) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < 8; i++) { | 
|  | if (name[i] == '\0') | 
|  | break; | 
|  | dcss_name[i] = toupper(name[i]); | 
|  | }; | 
|  | for (; i < 8; i++) | 
|  | dcss_name[i] = ' '; | 
|  | ASCEBC(dcss_name, 8); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * search all segments in dcss_list, and return the one | 
|  | * namend *name. If not found, return NULL. | 
|  | */ | 
|  | static struct dcss_segment * | 
|  | segment_by_name (char *name) | 
|  | { | 
|  | char dcss_name[9]; | 
|  | struct list_head *l; | 
|  | struct dcss_segment *tmp, *retval = NULL; | 
|  |  | 
|  | BUG_ON(!mutex_is_locked(&dcss_lock)); | 
|  | dcss_mkname (name, dcss_name); | 
|  | list_for_each (l, &dcss_list) { | 
|  | tmp = list_entry (l, struct dcss_segment, list); | 
|  | if (memcmp(tmp->dcss_name, dcss_name, 8) == 0) { | 
|  | retval = tmp; | 
|  | break; | 
|  | } | 
|  | } | 
|  | return retval; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Perform a function on a dcss segment. | 
|  | */ | 
|  | static inline int | 
|  | dcss_diag (__u8 func, void *parameter, | 
|  | unsigned long *ret1, unsigned long *ret2) | 
|  | { | 
|  | unsigned long rx, ry; | 
|  | int rc; | 
|  |  | 
|  | rx = (unsigned long) parameter; | 
|  | ry = (unsigned long) func; | 
|  | asm volatile( | 
|  | #ifdef CONFIG_64BIT | 
|  | "	sam31\n" | 
|  | "	diag	%0,%1,0x64\n" | 
|  | "	sam64\n" | 
|  | #else | 
|  | "	diag	%0,%1,0x64\n" | 
|  | #endif | 
|  | "	ipm	%2\n" | 
|  | "	srl	%2,28\n" | 
|  | : "+d" (rx), "+d" (ry), "=d" (rc) : : "cc"); | 
|  | *ret1 = rx; | 
|  | *ret2 = ry; | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static inline int | 
|  | dcss_diag_translate_rc (int vm_rc) { | 
|  | if (vm_rc == 44) | 
|  | return -ENOENT; | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* do a diag to get info about a segment. | 
|  | * fills start_address, end and vm_segtype fields | 
|  | */ | 
|  | static int | 
|  | query_segment_type (struct dcss_segment *seg) | 
|  | { | 
|  | struct qin64  *qin = kmalloc (sizeof(struct qin64), GFP_DMA); | 
|  | struct qout64 *qout = kmalloc (sizeof(struct qout64), GFP_DMA); | 
|  |  | 
|  | int diag_cc, rc, i; | 
|  | unsigned long dummy, vmrc; | 
|  |  | 
|  | if ((qin == NULL) || (qout == NULL)) { | 
|  | rc = -ENOMEM; | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | /* initialize diag input parameters */ | 
|  | qin->qopcode = DCSS_FINDSEGA; | 
|  | qin->qoutptr = (unsigned long) qout; | 
|  | qin->qoutlen = sizeof(struct qout64); | 
|  | memcpy (qin->qname, seg->dcss_name, 8); | 
|  |  | 
|  | diag_cc = dcss_diag (DCSS_SEGEXT, qin, &dummy, &vmrc); | 
|  |  | 
|  | if (diag_cc > 1) { | 
|  | PRINT_WARN ("segment_type: diag returned error %ld\n", vmrc); | 
|  | rc = dcss_diag_translate_rc (vmrc); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | if (qout->segcnt > 6) { | 
|  | rc = -ENOTSUPP; | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | if (qout->segcnt == 1) { | 
|  | seg->vm_segtype = qout->range[0].start & 0xff; | 
|  | } else { | 
|  | /* multi-part segment. only one type supported here: | 
|  | - all parts are contiguous | 
|  | - all parts are either EW or EN type | 
|  | - maximum 6 parts allowed */ | 
|  | unsigned long start = qout->segstart >> PAGE_SHIFT; | 
|  | for (i=0; i<qout->segcnt; i++) { | 
|  | if (((qout->range[i].start & 0xff) != SEG_TYPE_EW) && | 
|  | ((qout->range[i].start & 0xff) != SEG_TYPE_EN)) { | 
|  | rc = -ENOTSUPP; | 
|  | goto out_free; | 
|  | } | 
|  | if (start != qout->range[i].start >> PAGE_SHIFT) { | 
|  | rc = -ENOTSUPP; | 
|  | goto out_free; | 
|  | } | 
|  | start = (qout->range[i].end >> PAGE_SHIFT) + 1; | 
|  | } | 
|  | seg->vm_segtype = SEG_TYPE_EWEN; | 
|  | } | 
|  |  | 
|  | /* analyze diag output and update seg */ | 
|  | seg->start_addr = qout->segstart; | 
|  | seg->end = qout->segend; | 
|  |  | 
|  | memcpy (seg->range, qout->range, 6*sizeof(struct qrange)); | 
|  | seg->segcnt = qout->segcnt; | 
|  |  | 
|  | rc = 0; | 
|  |  | 
|  | out_free: | 
|  | kfree(qin); | 
|  | kfree(qout); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * get info about a segment | 
|  | * possible return values: | 
|  | * -ENOSYS  : we are not running on VM | 
|  | * -EIO     : could not perform query diagnose | 
|  | * -ENOENT  : no such segment | 
|  | * -ENOTSUPP: multi-part segment cannot be used with linux | 
|  | * -ENOSPC  : segment cannot be used (overlaps with storage) | 
|  | * -ENOMEM  : out of memory | 
|  | * 0 .. 6   : type of segment as defined in include/asm-s390/extmem.h | 
|  | */ | 
|  | int | 
|  | segment_type (char* name) | 
|  | { | 
|  | int rc; | 
|  | struct dcss_segment seg; | 
|  |  | 
|  | if (!MACHINE_IS_VM) | 
|  | return -ENOSYS; | 
|  |  | 
|  | dcss_mkname(name, seg.dcss_name); | 
|  | rc = query_segment_type (&seg); | 
|  | if (rc < 0) | 
|  | return rc; | 
|  | return seg.vm_segtype; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * real segment loading function, called from segment_load | 
|  | */ | 
|  | static int | 
|  | __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long *end) | 
|  | { | 
|  | struct dcss_segment *seg = kmalloc(sizeof(struct dcss_segment), | 
|  | GFP_DMA); | 
|  | int dcss_command, rc, diag_cc; | 
|  |  | 
|  | if (seg == NULL) { | 
|  | rc = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  | dcss_mkname (name, seg->dcss_name); | 
|  | rc = query_segment_type (seg); | 
|  | if (rc < 0) | 
|  | goto out_free; | 
|  |  | 
|  | rc = add_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1); | 
|  |  | 
|  | switch (rc) { | 
|  | case 0: | 
|  | break; | 
|  | case -ENOSPC: | 
|  | PRINT_WARN("segment_load: not loading segment %s - overlaps " | 
|  | "storage/segment\n", name); | 
|  | goto out_free; | 
|  | case -ERANGE: | 
|  | PRINT_WARN("segment_load: not loading segment %s - exceeds " | 
|  | "kernel mapping range\n", name); | 
|  | goto out_free; | 
|  | default: | 
|  | PRINT_WARN("segment_load: not loading segment %s (rc: %d)\n", | 
|  | name, rc); | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | seg->res = kzalloc(sizeof(struct resource), GFP_KERNEL); | 
|  | if (seg->res == NULL) { | 
|  | rc = -ENOMEM; | 
|  | goto out_shared; | 
|  | } | 
|  | seg->res->flags = IORESOURCE_BUSY | IORESOURCE_MEM; | 
|  | seg->res->start = seg->start_addr; | 
|  | seg->res->end = seg->end; | 
|  | memcpy(&seg->res_name, seg->dcss_name, 8); | 
|  | EBCASC(seg->res_name, 8); | 
|  | seg->res_name[8] = '\0'; | 
|  | strncat(seg->res_name, " (DCSS)", 7); | 
|  | seg->res->name = seg->res_name; | 
|  | rc = seg->vm_segtype; | 
|  | if (rc == SEG_TYPE_SC || | 
|  | ((rc == SEG_TYPE_SR || rc == SEG_TYPE_ER) && !do_nonshared)) | 
|  | seg->res->flags |= IORESOURCE_READONLY; | 
|  | if (request_resource(&iomem_resource, seg->res)) { | 
|  | rc = -EBUSY; | 
|  | kfree(seg->res); | 
|  | goto out_shared; | 
|  | } | 
|  |  | 
|  | if (do_nonshared) | 
|  | dcss_command = DCSS_LOADNSR; | 
|  | else | 
|  | dcss_command = DCSS_LOADNOLY; | 
|  |  | 
|  | diag_cc = dcss_diag(dcss_command, seg->dcss_name, | 
|  | &seg->start_addr, &seg->end); | 
|  | if (diag_cc > 1) { | 
|  | PRINT_WARN ("segment_load: could not load segment %s - " | 
|  | "diag returned error (%ld)\n",name,seg->end); | 
|  | rc = dcss_diag_translate_rc (seg->end); | 
|  | dcss_diag(DCSS_PURGESEG, seg->dcss_name, | 
|  | &seg->start_addr, &seg->end); | 
|  | goto out_resource; | 
|  | } | 
|  | seg->do_nonshared = do_nonshared; | 
|  | atomic_set(&seg->ref_count, 1); | 
|  | list_add(&seg->list, &dcss_list); | 
|  | *addr = seg->start_addr; | 
|  | *end  = seg->end; | 
|  | if (do_nonshared) | 
|  | PRINT_INFO ("segment_load: loaded segment %s range %p .. %p " | 
|  | "type %s in non-shared mode\n", name, | 
|  | (void*)seg->start_addr, (void*)seg->end, | 
|  | segtype_string[seg->vm_segtype]); | 
|  | else { | 
|  | PRINT_INFO ("segment_load: loaded segment %s range %p .. %p " | 
|  | "type %s in shared mode\n", name, | 
|  | (void*)seg->start_addr, (void*)seg->end, | 
|  | segtype_string[seg->vm_segtype]); | 
|  | } | 
|  | goto out; | 
|  | out_resource: | 
|  | release_resource(seg->res); | 
|  | kfree(seg->res); | 
|  | out_shared: | 
|  | remove_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1); | 
|  | out_free: | 
|  | kfree(seg); | 
|  | out: | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * this function loads a DCSS segment | 
|  | * name         : name of the DCSS | 
|  | * do_nonshared : 0 indicates that the dcss should be shared with other linux images | 
|  | *                1 indicates that the dcss should be exclusive for this linux image | 
|  | * addr         : will be filled with start address of the segment | 
|  | * end          : will be filled with end address of the segment | 
|  | * return values: | 
|  | * -ENOSYS  : we are not running on VM | 
|  | * -EIO     : could not perform query or load diagnose | 
|  | * -ENOENT  : no such segment | 
|  | * -ENOTSUPP: multi-part segment cannot be used with linux | 
|  | * -ENOSPC  : segment cannot be used (overlaps with storage) | 
|  | * -EBUSY   : segment can temporarily not be used (overlaps with dcss) | 
|  | * -ERANGE  : segment cannot be used (exceeds kernel mapping range) | 
|  | * -EPERM   : segment is currently loaded with incompatible permissions | 
|  | * -ENOMEM  : out of memory | 
|  | * 0 .. 6   : type of segment as defined in include/asm-s390/extmem.h | 
|  | */ | 
|  | int | 
|  | segment_load (char *name, int do_nonshared, unsigned long *addr, | 
|  | unsigned long *end) | 
|  | { | 
|  | struct dcss_segment *seg; | 
|  | int rc; | 
|  |  | 
|  | if (!MACHINE_IS_VM) | 
|  | return -ENOSYS; | 
|  |  | 
|  | mutex_lock(&dcss_lock); | 
|  | seg = segment_by_name (name); | 
|  | if (seg == NULL) | 
|  | rc = __segment_load (name, do_nonshared, addr, end); | 
|  | else { | 
|  | if (do_nonshared == seg->do_nonshared) { | 
|  | atomic_inc(&seg->ref_count); | 
|  | *addr = seg->start_addr; | 
|  | *end  = seg->end; | 
|  | rc    = seg->vm_segtype; | 
|  | } else { | 
|  | *addr = *end = 0; | 
|  | rc    = -EPERM; | 
|  | } | 
|  | } | 
|  | mutex_unlock(&dcss_lock); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * this function modifies the shared state of a DCSS segment. note that | 
|  | * name         : name of the DCSS | 
|  | * do_nonshared : 0 indicates that the dcss should be shared with other linux images | 
|  | *                1 indicates that the dcss should be exclusive for this linux image | 
|  | * return values: | 
|  | * -EIO     : could not perform load diagnose (segment gone!) | 
|  | * -ENOENT  : no such segment (segment gone!) | 
|  | * -EAGAIN  : segment is in use by other exploiters, try later | 
|  | * -EINVAL  : no segment with the given name is currently loaded - name invalid | 
|  | * -EBUSY   : segment can temporarily not be used (overlaps with dcss) | 
|  | * 0	    : operation succeeded | 
|  | */ | 
|  | int | 
|  | segment_modify_shared (char *name, int do_nonshared) | 
|  | { | 
|  | struct dcss_segment *seg; | 
|  | unsigned long dummy; | 
|  | int dcss_command, rc, diag_cc; | 
|  |  | 
|  | mutex_lock(&dcss_lock); | 
|  | seg = segment_by_name (name); | 
|  | if (seg == NULL) { | 
|  | rc = -EINVAL; | 
|  | goto out_unlock; | 
|  | } | 
|  | if (do_nonshared == seg->do_nonshared) { | 
|  | PRINT_INFO ("segment_modify_shared: not reloading segment %s" | 
|  | " - already in requested mode\n",name); | 
|  | rc = 0; | 
|  | goto out_unlock; | 
|  | } | 
|  | if (atomic_read (&seg->ref_count) != 1) { | 
|  | PRINT_WARN ("segment_modify_shared: not reloading segment %s - " | 
|  | "segment is in use by other driver(s)\n",name); | 
|  | rc = -EAGAIN; | 
|  | goto out_unlock; | 
|  | } | 
|  | release_resource(seg->res); | 
|  | if (do_nonshared) { | 
|  | dcss_command = DCSS_LOADNSR; | 
|  | seg->res->flags &= ~IORESOURCE_READONLY; | 
|  | } else { | 
|  | dcss_command = DCSS_LOADNOLY; | 
|  | if (seg->vm_segtype == SEG_TYPE_SR || | 
|  | seg->vm_segtype == SEG_TYPE_ER) | 
|  | seg->res->flags |= IORESOURCE_READONLY; | 
|  | } | 
|  | if (request_resource(&iomem_resource, seg->res)) { | 
|  | PRINT_WARN("segment_modify_shared: could not reload segment %s" | 
|  | " - overlapping resources\n", name); | 
|  | rc = -EBUSY; | 
|  | kfree(seg->res); | 
|  | goto out_del; | 
|  | } | 
|  | dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy); | 
|  | diag_cc = dcss_diag(dcss_command, seg->dcss_name, | 
|  | &seg->start_addr, &seg->end); | 
|  | if (diag_cc > 1) { | 
|  | PRINT_WARN ("segment_modify_shared: could not reload segment %s" | 
|  | " - diag returned error (%ld)\n",name,seg->end); | 
|  | rc = dcss_diag_translate_rc (seg->end); | 
|  | goto out_del; | 
|  | } | 
|  | seg->do_nonshared = do_nonshared; | 
|  | rc = 0; | 
|  | goto out_unlock; | 
|  | out_del: | 
|  | remove_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1); | 
|  | list_del(&seg->list); | 
|  | dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy); | 
|  | kfree(seg); | 
|  | out_unlock: | 
|  | mutex_unlock(&dcss_lock); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Decrease the use count of a DCSS segment and remove | 
|  | * it from the address space if nobody is using it | 
|  | * any longer. | 
|  | */ | 
|  | void | 
|  | segment_unload(char *name) | 
|  | { | 
|  | unsigned long dummy; | 
|  | struct dcss_segment *seg; | 
|  |  | 
|  | if (!MACHINE_IS_VM) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&dcss_lock); | 
|  | seg = segment_by_name (name); | 
|  | if (seg == NULL) { | 
|  | PRINT_ERR ("could not find segment %s in segment_unload, " | 
|  | "please report to linux390@de.ibm.com\n",name); | 
|  | goto out_unlock; | 
|  | } | 
|  | if (atomic_dec_return(&seg->ref_count) != 0) | 
|  | goto out_unlock; | 
|  | release_resource(seg->res); | 
|  | kfree(seg->res); | 
|  | remove_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1); | 
|  | list_del(&seg->list); | 
|  | dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy); | 
|  | kfree(seg); | 
|  | out_unlock: | 
|  | mutex_unlock(&dcss_lock); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * save segment content permanently | 
|  | */ | 
|  | void | 
|  | segment_save(char *name) | 
|  | { | 
|  | struct dcss_segment *seg; | 
|  | int startpfn = 0; | 
|  | int endpfn = 0; | 
|  | char cmd1[160]; | 
|  | char cmd2[80]; | 
|  | int i, response; | 
|  |  | 
|  | if (!MACHINE_IS_VM) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&dcss_lock); | 
|  | seg = segment_by_name (name); | 
|  |  | 
|  | if (seg == NULL) { | 
|  | PRINT_ERR("could not find segment %s in segment_save, please " | 
|  | "report to linux390@de.ibm.com\n", name); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | startpfn = seg->start_addr >> PAGE_SHIFT; | 
|  | endpfn = (seg->end) >> PAGE_SHIFT; | 
|  | sprintf(cmd1, "DEFSEG %s", name); | 
|  | for (i=0; i<seg->segcnt; i++) { | 
|  | sprintf(cmd1+strlen(cmd1), " %X-%X %s", | 
|  | seg->range[i].start >> PAGE_SHIFT, | 
|  | seg->range[i].end >> PAGE_SHIFT, | 
|  | segtype_string[seg->range[i].start & 0xff]); | 
|  | } | 
|  | sprintf(cmd2, "SAVESEG %s", name); | 
|  | response = 0; | 
|  | cpcmd(cmd1, NULL, 0, &response); | 
|  | if (response) { | 
|  | PRINT_ERR("segment_save: DEFSEG failed with response code %i\n", | 
|  | response); | 
|  | goto out; | 
|  | } | 
|  | cpcmd(cmd2, NULL, 0, &response); | 
|  | if (response) { | 
|  | PRINT_ERR("segment_save: SAVESEG failed with response code %i\n", | 
|  | response); | 
|  | goto out; | 
|  | } | 
|  | out: | 
|  | mutex_unlock(&dcss_lock); | 
|  | } | 
|  |  | 
|  | EXPORT_SYMBOL(segment_load); | 
|  | EXPORT_SYMBOL(segment_unload); | 
|  | EXPORT_SYMBOL(segment_save); | 
|  | EXPORT_SYMBOL(segment_type); | 
|  | EXPORT_SYMBOL(segment_modify_shared); |