PCI-Express AER implemetation: AER core and aerdriver
Patch 3 implements the core part of PCI-Express AER and aerdrv
port service driver.
When a root port service device is probed, the aerdrv will call
request_irq to register irq handler for AER error interrupt.
When a device sends an PCI-Express error message to the root port,
the root port will trigger an interrupt, by either MSI or IO-APIC,
then kernel would run the irq handler. The handler collects root
error status register and schedules a work. The work will call
the core part to process the error based on its type
(Correctable/non-fatal/fatal).
As for Correctable errors, the patch chooses to just clear the correctable
error status register of the device.
As for the non-fatal error, the patch follows generic PCI error handler
rules to call the error callback functions of the endpoint's driver. If
the device is a bridge, the patch chooses to broadcast the error to
downstream devices.
As for the fatal error, the patch resets the pci-express link and
follows generic PCI error handler rules to call the error callback
functions of the endpoint's driver. If the device is a bridge, the patch
chooses to broadcast the error to downstream devices.
Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/pci/pcie/aer/Makefile b/drivers/pci/pcie/aer/Makefile
new file mode 100644
index 0000000..15a4f40
--- /dev/null
+++ b/drivers/pci/pcie/aer/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for PCI-Express Root Port Advanced Error Reporting Driver
+#
+
+obj-$(CONFIG_PCIEAER) += aerdriver.o
+
+aerdriver-objs := aerdrv_errprint.o aerdrv_core.o aerdrv.o aerdrv_acpi.o
+