|  | /* | 
|  | *  sdricoh_cs.c - driver for Ricoh Secure Digital Card Readers that can be | 
|  | *     found on some Ricoh RL5c476 II cardbus bridge | 
|  | * | 
|  | *  Copyright (C) 2006 - 2008 Sascha Sommer <saschasommer@freenet.de> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | * | 
|  | */ | 
|  |  | 
|  | /* | 
|  | #define DEBUG | 
|  | #define VERBOSE_DEBUG | 
|  | */ | 
|  | #include <linux/delay.h> | 
|  | #include <linux/highmem.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/scatterlist.h> | 
|  |  | 
|  | #include <pcmcia/cs_types.h> | 
|  | #include <pcmcia/cs.h> | 
|  | #include <pcmcia/cistpl.h> | 
|  | #include <pcmcia/ds.h> | 
|  | #include <linux/io.h> | 
|  |  | 
|  | #include <linux/mmc/host.h> | 
|  |  | 
|  | #define DRIVER_NAME "sdricoh_cs" | 
|  |  | 
|  | static unsigned int switchlocked; | 
|  |  | 
|  | /* i/o region */ | 
|  | #define SDRICOH_PCI_REGION 0 | 
|  | #define SDRICOH_PCI_REGION_SIZE 0x1000 | 
|  |  | 
|  | /* registers */ | 
|  | #define R104_VERSION     0x104 | 
|  | #define R200_CMD         0x200 | 
|  | #define R204_CMD_ARG     0x204 | 
|  | #define R208_DATAIO      0x208 | 
|  | #define R20C_RESP        0x20c | 
|  | #define R21C_STATUS      0x21c | 
|  | #define R2E0_INIT        0x2e0 | 
|  | #define R2E4_STATUS_RESP 0x2e4 | 
|  | #define R2F0_RESET       0x2f0 | 
|  | #define R224_MODE        0x224 | 
|  | #define R226_BLOCKSIZE   0x226 | 
|  | #define R228_POWER       0x228 | 
|  | #define R230_DATA        0x230 | 
|  |  | 
|  | /* flags for the R21C_STATUS register */ | 
|  | #define STATUS_CMD_FINISHED      0x00000001 | 
|  | #define STATUS_TRANSFER_FINISHED 0x00000004 | 
|  | #define STATUS_CARD_INSERTED     0x00000020 | 
|  | #define STATUS_CARD_LOCKED       0x00000080 | 
|  | #define STATUS_CMD_TIMEOUT       0x00400000 | 
|  | #define STATUS_READY_TO_READ     0x01000000 | 
|  | #define STATUS_READY_TO_WRITE    0x02000000 | 
|  | #define STATUS_BUSY              0x40000000 | 
|  |  | 
|  | /* timeouts */ | 
|  | #define INIT_TIMEOUT      100 | 
|  | #define CMD_TIMEOUT       100000 | 
|  | #define TRANSFER_TIMEOUT  100000 | 
|  | #define BUSY_TIMEOUT      32767 | 
|  |  | 
|  | /* list of supported pcmcia devices */ | 
|  | static struct pcmcia_device_id pcmcia_ids[] = { | 
|  | /* vendor and device strings followed by their crc32 hashes */ | 
|  | PCMCIA_DEVICE_PROD_ID12("RICOH", "Bay1Controller", 0xd9f522ed, | 
|  | 0xc3901202), | 
|  | PCMCIA_DEVICE_NULL, | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(pcmcia, pcmcia_ids); | 
|  |  | 
|  | /* mmc privdata */ | 
|  | struct sdricoh_host { | 
|  | struct device *dev; | 
|  | struct mmc_host *mmc;	/* MMC structure */ | 
|  | unsigned char __iomem *iobase; | 
|  | struct pci_dev *pci_dev; | 
|  | int app_cmd; | 
|  | }; | 
|  |  | 
|  | /***************** register i/o helper functions *****************************/ | 
|  |  | 
|  | static inline unsigned int sdricoh_readl(struct sdricoh_host *host, | 
|  | unsigned int reg) | 
|  | { | 
|  | unsigned int value = readl(host->iobase + reg); | 
|  | dev_vdbg(host->dev, "rl %x 0x%x\n", reg, value); | 
|  | return value; | 
|  | } | 
|  |  | 
|  | static inline void sdricoh_writel(struct sdricoh_host *host, unsigned int reg, | 
|  | unsigned int value) | 
|  | { | 
|  | writel(value, host->iobase + reg); | 
|  | dev_vdbg(host->dev, "wl %x 0x%x\n", reg, value); | 
|  |  | 
|  | } | 
|  |  | 
|  | static inline unsigned int sdricoh_readw(struct sdricoh_host *host, | 
|  | unsigned int reg) | 
|  | { | 
|  | unsigned int value = readw(host->iobase + reg); | 
|  | dev_vdbg(host->dev, "rb %x 0x%x\n", reg, value); | 
|  | return value; | 
|  | } | 
|  |  | 
|  | static inline void sdricoh_writew(struct sdricoh_host *host, unsigned int reg, | 
|  | unsigned short value) | 
|  | { | 
|  | writew(value, host->iobase + reg); | 
|  | dev_vdbg(host->dev, "ww %x 0x%x\n", reg, value); | 
|  | } | 
|  |  | 
|  | static inline unsigned int sdricoh_readb(struct sdricoh_host *host, | 
|  | unsigned int reg) | 
|  | { | 
|  | unsigned int value = readb(host->iobase + reg); | 
|  | dev_vdbg(host->dev, "rb %x 0x%x\n", reg, value); | 
|  | return value; | 
|  | } | 
|  |  | 
|  | static int sdricoh_query_status(struct sdricoh_host *host, unsigned int wanted, | 
|  | unsigned int timeout){ | 
|  | unsigned int loop; | 
|  | unsigned int status = 0; | 
|  | struct device *dev = host->dev; | 
|  | for (loop = 0; loop < timeout; loop++) { | 
|  | status = sdricoh_readl(host, R21C_STATUS); | 
|  | sdricoh_writel(host, R2E4_STATUS_RESP, status); | 
|  | if (status & wanted) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (loop == timeout) { | 
|  | dev_err(dev, "query_status: timeout waiting for %x\n", wanted); | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | /* do not do this check in the loop as some commands fail otherwise */ | 
|  | if (status & 0x7F0000) { | 
|  | dev_err(dev, "waiting for status bit %x failed\n", wanted); | 
|  | return -EINVAL; | 
|  | } | 
|  | return 0; | 
|  |  | 
|  | } | 
|  |  | 
|  | static int sdricoh_mmc_cmd(struct sdricoh_host *host, unsigned char opcode, | 
|  | unsigned int arg) | 
|  | { | 
|  | unsigned int status; | 
|  | int result = 0; | 
|  | unsigned int loop = 0; | 
|  | /* reset status reg? */ | 
|  | sdricoh_writel(host, R21C_STATUS, 0x18); | 
|  | /* fill parameters */ | 
|  | sdricoh_writel(host, R204_CMD_ARG, arg); | 
|  | sdricoh_writel(host, R200_CMD, (0x10000 << 8) | opcode); | 
|  | /* wait for command completion */ | 
|  | if (opcode) { | 
|  | for (loop = 0; loop < CMD_TIMEOUT; loop++) { | 
|  | status = sdricoh_readl(host, R21C_STATUS); | 
|  | sdricoh_writel(host, R2E4_STATUS_RESP, status); | 
|  | if (status  & STATUS_CMD_FINISHED) | 
|  | break; | 
|  | } | 
|  | /* don't check for timeout in the loop it is not always | 
|  | reset correctly | 
|  | */ | 
|  | if (loop == CMD_TIMEOUT || status & STATUS_CMD_TIMEOUT) | 
|  | result = -ETIMEDOUT; | 
|  |  | 
|  | } | 
|  |  | 
|  | return result; | 
|  |  | 
|  | } | 
|  |  | 
|  | static int sdricoh_reset(struct sdricoh_host *host) | 
|  | { | 
|  | dev_dbg(host->dev, "reset\n"); | 
|  | sdricoh_writel(host, R2F0_RESET, 0x10001); | 
|  | sdricoh_writel(host, R2E0_INIT, 0x10000); | 
|  | if (sdricoh_readl(host, R2E0_INIT) != 0x10000) | 
|  | return -EIO; | 
|  | sdricoh_writel(host, R2E0_INIT, 0x10007); | 
|  |  | 
|  | sdricoh_writel(host, R224_MODE, 0x2000000); | 
|  | sdricoh_writel(host, R228_POWER, 0xe0); | 
|  |  | 
|  |  | 
|  | /* status register ? */ | 
|  | sdricoh_writel(host, R21C_STATUS, 0x18); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sdricoh_blockio(struct sdricoh_host *host, int read, | 
|  | u8 *buf, int len) | 
|  | { | 
|  | int size; | 
|  | u32 data = 0; | 
|  | /* wait until the data is available */ | 
|  | if (read) { | 
|  | if (sdricoh_query_status(host, STATUS_READY_TO_READ, | 
|  | TRANSFER_TIMEOUT)) | 
|  | return -ETIMEDOUT; | 
|  | sdricoh_writel(host, R21C_STATUS, 0x18); | 
|  | /* read data */ | 
|  | while (len) { | 
|  | data = sdricoh_readl(host, R230_DATA); | 
|  | size = min(len, 4); | 
|  | len -= size; | 
|  | while (size) { | 
|  | *buf = data & 0xFF; | 
|  | buf++; | 
|  | data >>= 8; | 
|  | size--; | 
|  | } | 
|  | } | 
|  | } else { | 
|  | if (sdricoh_query_status(host, STATUS_READY_TO_WRITE, | 
|  | TRANSFER_TIMEOUT)) | 
|  | return -ETIMEDOUT; | 
|  | sdricoh_writel(host, R21C_STATUS, 0x18); | 
|  | /* write data */ | 
|  | while (len) { | 
|  | size = min(len, 4); | 
|  | len -= size; | 
|  | while (size) { | 
|  | data >>= 8; | 
|  | data |= (u32)*buf << 24; | 
|  | buf++; | 
|  | size--; | 
|  | } | 
|  | sdricoh_writel(host, R230_DATA, data); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (len) | 
|  | return -EIO; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void sdricoh_request(struct mmc_host *mmc, struct mmc_request *mrq) | 
|  | { | 
|  | struct sdricoh_host *host = mmc_priv(mmc); | 
|  | struct mmc_command *cmd = mrq->cmd; | 
|  | struct mmc_data *data = cmd->data; | 
|  | struct device *dev = host->dev; | 
|  | unsigned char opcode = cmd->opcode; | 
|  | int i; | 
|  |  | 
|  | dev_dbg(dev, "=============================\n"); | 
|  | dev_dbg(dev, "sdricoh_request opcode=%i\n", opcode); | 
|  |  | 
|  | sdricoh_writel(host, R21C_STATUS, 0x18); | 
|  |  | 
|  | /* MMC_APP_CMDs need some special handling */ | 
|  | if (host->app_cmd) { | 
|  | opcode |= 64; | 
|  | host->app_cmd = 0; | 
|  | } else if (opcode == 55) | 
|  | host->app_cmd = 1; | 
|  |  | 
|  | /* read/write commands seem to require this */ | 
|  | if (data) { | 
|  | sdricoh_writew(host, R226_BLOCKSIZE, data->blksz); | 
|  | sdricoh_writel(host, R208_DATAIO, 0); | 
|  | } | 
|  |  | 
|  | cmd->error = sdricoh_mmc_cmd(host, opcode, cmd->arg); | 
|  |  | 
|  | /* read response buffer */ | 
|  | if (cmd->flags & MMC_RSP_PRESENT) { | 
|  | if (cmd->flags & MMC_RSP_136) { | 
|  | /* CRC is stripped so we need to do some shifting. */ | 
|  | for (i = 0; i < 4; i++) { | 
|  | cmd->resp[i] = | 
|  | sdricoh_readl(host, | 
|  | R20C_RESP + (3 - i) * 4) << 8; | 
|  | if (i != 3) | 
|  | cmd->resp[i] |= | 
|  | sdricoh_readb(host, R20C_RESP + | 
|  | (3 - i) * 4 - 1); | 
|  | } | 
|  | } else | 
|  | cmd->resp[0] = sdricoh_readl(host, R20C_RESP); | 
|  | } | 
|  |  | 
|  | /* transfer data */ | 
|  | if (data && cmd->error == 0) { | 
|  | dev_dbg(dev, "transfer: blksz %i blocks %i sg_len %i " | 
|  | "sg length %i\n", data->blksz, data->blocks, | 
|  | data->sg_len, data->sg->length); | 
|  |  | 
|  | /* enter data reading mode */ | 
|  | sdricoh_writel(host, R21C_STATUS, 0x837f031e); | 
|  | for (i = 0; i < data->blocks; i++) { | 
|  | size_t len = data->blksz; | 
|  | u8 *buf; | 
|  | struct page *page; | 
|  | int result; | 
|  | page = sg_page(data->sg); | 
|  |  | 
|  | buf = kmap(page) + data->sg->offset + (len * i); | 
|  | result = | 
|  | sdricoh_blockio(host, | 
|  | data->flags & MMC_DATA_READ, buf, len); | 
|  | kunmap(page); | 
|  | flush_dcache_page(page); | 
|  | if (result) { | 
|  | dev_err(dev, "sdricoh_request: cmd %i " | 
|  | "block transfer failed\n", cmd->opcode); | 
|  | cmd->error = result; | 
|  | break; | 
|  | } else | 
|  | data->bytes_xfered += len; | 
|  | } | 
|  |  | 
|  | sdricoh_writel(host, R208_DATAIO, 1); | 
|  |  | 
|  | if (sdricoh_query_status(host, STATUS_TRANSFER_FINISHED, | 
|  | TRANSFER_TIMEOUT)) { | 
|  | dev_err(dev, "sdricoh_request: transfer end error\n"); | 
|  | cmd->error = -EINVAL; | 
|  | } | 
|  | } | 
|  | /* FIXME check busy flag */ | 
|  |  | 
|  | mmc_request_done(mmc, mrq); | 
|  | dev_dbg(dev, "=============================\n"); | 
|  | } | 
|  |  | 
|  | static void sdricoh_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) | 
|  | { | 
|  | struct sdricoh_host *host = mmc_priv(mmc); | 
|  | dev_dbg(host->dev, "set_ios\n"); | 
|  |  | 
|  | if (ios->power_mode == MMC_POWER_ON) { | 
|  | sdricoh_writel(host, R228_POWER, 0xc0e0); | 
|  |  | 
|  | if (ios->bus_width == MMC_BUS_WIDTH_4) { | 
|  | sdricoh_writel(host, R224_MODE, 0x2000300); | 
|  | sdricoh_writel(host, R228_POWER, 0x40e0); | 
|  | } else { | 
|  | sdricoh_writel(host, R224_MODE, 0x2000340); | 
|  | } | 
|  |  | 
|  | } else if (ios->power_mode == MMC_POWER_UP) { | 
|  | sdricoh_writel(host, R224_MODE, 0x2000320); | 
|  | sdricoh_writel(host, R228_POWER, 0xe0); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int sdricoh_get_ro(struct mmc_host *mmc) | 
|  | { | 
|  | struct sdricoh_host *host = mmc_priv(mmc); | 
|  | unsigned int status; | 
|  |  | 
|  | status = sdricoh_readl(host, R21C_STATUS); | 
|  | sdricoh_writel(host, R2E4_STATUS_RESP, status); | 
|  |  | 
|  | /* some notebooks seem to have the locked flag switched */ | 
|  | if (switchlocked) | 
|  | return !(status & STATUS_CARD_LOCKED); | 
|  |  | 
|  | return (status & STATUS_CARD_LOCKED); | 
|  | } | 
|  |  | 
|  | static struct mmc_host_ops sdricoh_ops = { | 
|  | .request = sdricoh_request, | 
|  | .set_ios = sdricoh_set_ios, | 
|  | .get_ro = sdricoh_get_ro, | 
|  | }; | 
|  |  | 
|  | /* initialize the control and register it to the mmc framework */ | 
|  | static int sdricoh_init_mmc(struct pci_dev *pci_dev, | 
|  | struct pcmcia_device *pcmcia_dev) | 
|  | { | 
|  | int result = 0; | 
|  | void __iomem *iobase = NULL; | 
|  | struct mmc_host *mmc = NULL; | 
|  | struct sdricoh_host *host = NULL; | 
|  | struct device *dev = &pcmcia_dev->dev; | 
|  | /* map iomem */ | 
|  | if (pci_resource_len(pci_dev, SDRICOH_PCI_REGION) != | 
|  | SDRICOH_PCI_REGION_SIZE) { | 
|  | dev_dbg(dev, "unexpected pci resource len\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  | iobase = | 
|  | pci_iomap(pci_dev, SDRICOH_PCI_REGION, SDRICOH_PCI_REGION_SIZE); | 
|  | if (!iobase) { | 
|  | dev_err(dev, "unable to map iobase\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  | /* check version? */ | 
|  | if (readl(iobase + R104_VERSION) != 0x4000) { | 
|  | dev_dbg(dev, "no supported mmc controller found\n"); | 
|  | result = -ENODEV; | 
|  | goto err; | 
|  | } | 
|  | /* allocate privdata */ | 
|  | mmc = pcmcia_dev->priv = | 
|  | mmc_alloc_host(sizeof(struct sdricoh_host), &pcmcia_dev->dev); | 
|  | if (!mmc) { | 
|  | dev_err(dev, "mmc_alloc_host failed\n"); | 
|  | result = -ENOMEM; | 
|  | goto err; | 
|  | } | 
|  | host = mmc_priv(mmc); | 
|  |  | 
|  | host->iobase = iobase; | 
|  | host->dev = dev; | 
|  | host->pci_dev = pci_dev; | 
|  |  | 
|  | mmc->ops = &sdricoh_ops; | 
|  |  | 
|  | /* FIXME: frequency and voltage handling is done by the controller | 
|  | */ | 
|  | mmc->f_min = 450000; | 
|  | mmc->f_max = 24000000; | 
|  | mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; | 
|  | mmc->caps |= MMC_CAP_4_BIT_DATA; | 
|  |  | 
|  | mmc->max_seg_size = 1024 * 512; | 
|  | mmc->max_blk_size = 512; | 
|  |  | 
|  | /* reset the controler */ | 
|  | if (sdricoh_reset(host)) { | 
|  | dev_dbg(dev, "could not reset\n"); | 
|  | result = -EIO; | 
|  | goto err; | 
|  |  | 
|  | } | 
|  |  | 
|  | result = mmc_add_host(mmc); | 
|  |  | 
|  | if (!result) { | 
|  | dev_dbg(dev, "mmc host registered\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | err: | 
|  | if (iobase) | 
|  | iounmap(iobase); | 
|  | if (mmc) | 
|  | mmc_free_host(mmc); | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | /* search for supported mmc controllers */ | 
|  | static int sdricoh_pcmcia_probe(struct pcmcia_device *pcmcia_dev) | 
|  | { | 
|  | struct pci_dev *pci_dev = NULL; | 
|  |  | 
|  | dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device" | 
|  | " %s %s ...\n", pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]); | 
|  |  | 
|  | /* search pci cardbus bridge that contains the mmc controler */ | 
|  | /* the io region is already claimed by yenta_socket... */ | 
|  | while ((pci_dev = | 
|  | pci_get_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, | 
|  | pci_dev))) { | 
|  | /* try to init the device */ | 
|  | if (!sdricoh_init_mmc(pci_dev, pcmcia_dev)) { | 
|  | dev_info(&pcmcia_dev->dev, "MMC controller found\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | } | 
|  | dev_err(&pcmcia_dev->dev, "No MMC controller was found.\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | static void sdricoh_pcmcia_detach(struct pcmcia_device *link) | 
|  | { | 
|  | struct mmc_host *mmc = link->priv; | 
|  |  | 
|  | dev_dbg(&link->dev, "detach\n"); | 
|  |  | 
|  | /* remove mmc host */ | 
|  | if (mmc) { | 
|  | struct sdricoh_host *host = mmc_priv(mmc); | 
|  | mmc_remove_host(mmc); | 
|  | pci_iounmap(host->pci_dev, host->iobase); | 
|  | pci_dev_put(host->pci_dev); | 
|  | mmc_free_host(mmc); | 
|  | } | 
|  | pcmcia_disable_device(link); | 
|  |  | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int sdricoh_pcmcia_suspend(struct pcmcia_device *link) | 
|  | { | 
|  | struct mmc_host *mmc = link->priv; | 
|  | dev_dbg(&link->dev, "suspend\n"); | 
|  | mmc_suspend_host(mmc, PMSG_SUSPEND); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sdricoh_pcmcia_resume(struct pcmcia_device *link) | 
|  | { | 
|  | struct mmc_host *mmc = link->priv; | 
|  | dev_dbg(&link->dev, "resume\n"); | 
|  | sdricoh_reset(mmc_priv(mmc)); | 
|  | mmc_resume_host(mmc); | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | #define sdricoh_pcmcia_suspend NULL | 
|  | #define sdricoh_pcmcia_resume NULL | 
|  | #endif | 
|  |  | 
|  | static struct pcmcia_driver sdricoh_driver = { | 
|  | .drv = { | 
|  | .name = DRIVER_NAME, | 
|  | }, | 
|  | .probe = sdricoh_pcmcia_probe, | 
|  | .remove = sdricoh_pcmcia_detach, | 
|  | .id_table = pcmcia_ids, | 
|  | .suspend = sdricoh_pcmcia_suspend, | 
|  | .resume = sdricoh_pcmcia_resume, | 
|  | }; | 
|  |  | 
|  | /*****************************************************************************\ | 
|  | *                                                                           * | 
|  | * Driver init/exit                                                          * | 
|  | *                                                                           * | 
|  | \*****************************************************************************/ | 
|  |  | 
|  | static int __init sdricoh_drv_init(void) | 
|  | { | 
|  | return pcmcia_register_driver(&sdricoh_driver); | 
|  | } | 
|  |  | 
|  | static void __exit sdricoh_drv_exit(void) | 
|  | { | 
|  | pcmcia_unregister_driver(&sdricoh_driver); | 
|  | } | 
|  |  | 
|  | module_init(sdricoh_drv_init); | 
|  | module_exit(sdricoh_drv_exit); | 
|  |  | 
|  | module_param(switchlocked, uint, 0444); | 
|  |  | 
|  | MODULE_AUTHOR("Sascha Sommer <saschasommer@freenet.de>"); | 
|  | MODULE_DESCRIPTION("Ricoh PCMCIA Secure Digital Interface driver"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | MODULE_PARM_DESC(switchlocked, "Switch the cards locked status." | 
|  | "Use this when unlocked cards are shown readonly (default 0)"); |